The endurance time (ET) method is a time history based dynamic analysis in which structures are subjected to gradually intensifying excitations and their performances are judged based on their responses at various exc...The endurance time (ET) method is a time history based dynamic analysis in which structures are subjected to gradually intensifying excitations and their performances are judged based on their responses at various excitation levels. Using this method, the computational effort required for estimating probable seismic demand parameters can be reduced by an order of magnitude. Calculation of the maximum displacement or target displacement is a basic requirement for estimating performance based on structural design. The purpose of this paper is to compare the results of the nonlinear ET method with the nonlinear static pushover (NSP) method of FEMA 356 by evaluating performances and target displacements of steel frames. This study will lead to a deeper insight into the capabilities and limitations of the ET method. The results are further compared with those of the standard nonlinear response history analysis. We conclude that results from the ET analysis are in proper agreement with those from standard procedures.展开更多
A new type of transferring structure for steel reinforced concrete (SRC) beams is used in high building. The pushover analysis method was used to study the failure mechanism and ductility of SRC transferring structure...A new type of transferring structure for steel reinforced concrete (SRC) beams is used in high building. The pushover analysis method was used to study the failure mechanism and ductility of SRC transferring structure through consulting pseudo-static test results for the structure. And, the occurrence order and position of the plastic hinge, the weak story and seismic capacity of high building with SRC transferring story were also studied through consulting shaking table test results for the high building, showing that the seismic behavior of high building with SRC transferring story is good.展开更多
This paper presents a simplified method of evaluating the seismic performance of buildings. The proposed method is based on the transformation of a multiple degree of freedom (MDOF) system to an equivalent single degr...This paper presents a simplified method of evaluating the seismic performance of buildings. The proposed method is based on the transformation of a multiple degree of freedom (MDOF) system to an equivalent single degree of freedom (SDOF) system using a simple and intuitive process. The proposed method is intended for evaluating the seismic performance of the buildings at the intermediate stages in design, while a rigorous method would be applied to the final design. The performance of the method is evaluated using a series of buildings which are assumed to be located in Victoria in western Canada, and designed based on the upcoming version of the National Building Code of Canada which is due to be published in 2005. To resist lateral loads, some of these buildings contain reinforced concrete moment resisting frames, while others contain reinforced concrete shear walls. Each building model has been subjected to a set of site-specific seismic spectrum compatible ground motion records, and the response has been determined using the proposed method and the general method for MDOF systems. The results from the study indicate that the proposed method can serve as a useful tool for evaluation of seismic performance of buildings, and carrying out performance based design.展开更多
文摘The endurance time (ET) method is a time history based dynamic analysis in which structures are subjected to gradually intensifying excitations and their performances are judged based on their responses at various excitation levels. Using this method, the computational effort required for estimating probable seismic demand parameters can be reduced by an order of magnitude. Calculation of the maximum displacement or target displacement is a basic requirement for estimating performance based on structural design. The purpose of this paper is to compare the results of the nonlinear ET method with the nonlinear static pushover (NSP) method of FEMA 356 by evaluating performances and target displacements of steel frames. This study will lead to a deeper insight into the capabilities and limitations of the ET method. The results are further compared with those of the standard nonlinear response history analysis. We conclude that results from the ET analysis are in proper agreement with those from standard procedures.
文摘A new type of transferring structure for steel reinforced concrete (SRC) beams is used in high building. The pushover analysis method was used to study the failure mechanism and ductility of SRC transferring structure through consulting pseudo-static test results for the structure. And, the occurrence order and position of the plastic hinge, the weak story and seismic capacity of high building with SRC transferring story were also studied through consulting shaking table test results for the high building, showing that the seismic behavior of high building with SRC transferring story is good.
文摘This paper presents a simplified method of evaluating the seismic performance of buildings. The proposed method is based on the transformation of a multiple degree of freedom (MDOF) system to an equivalent single degree of freedom (SDOF) system using a simple and intuitive process. The proposed method is intended for evaluating the seismic performance of the buildings at the intermediate stages in design, while a rigorous method would be applied to the final design. The performance of the method is evaluated using a series of buildings which are assumed to be located in Victoria in western Canada, and designed based on the upcoming version of the National Building Code of Canada which is due to be published in 2005. To resist lateral loads, some of these buildings contain reinforced concrete moment resisting frames, while others contain reinforced concrete shear walls. Each building model has been subjected to a set of site-specific seismic spectrum compatible ground motion records, and the response has been determined using the proposed method and the general method for MDOF systems. The results from the study indicate that the proposed method can serve as a useful tool for evaluation of seismic performance of buildings, and carrying out performance based design.
