State-selective single-and double-electron capture processes in collisions of S^(5+)ions with helium at energies ranging from 50.8 keV to 100 keV were investigated using cold target recoil ion momentum spectroscopy(CO...State-selective single-and double-electron capture processes in collisions of S^(5+)ions with helium at energies ranging from 50.8 keV to 100 keV were investigated using cold target recoil ion momentum spectroscopy(COLTRIMS).Q-value spectra and projectile scattering angle distributions were obtained.For single-electron capture,single electron capture into n=3 states of the projectile ion is dominant.As the projectile energy increases,the contribution of single electron capture into n=4 states is observed.Experimental relative cross-sections for single-electron capture into different projectile final states were compared with theoretical predictions based on the molecular orbital close-coupling(MOCC)method.In double-electron capture,two-electron populating into the 3s^(2)3p and 3s3p^(2)states of projectile dominates.The reaction window calculated from the classical molecular Coulombic barrier model can qualitatively explain the experimental results.The scattering angle distribution of the multi-peak structure of the double-electron capture process is observed.The database is openly available in Science Data Bank at https://doi.org/10.57760/sciencedb.j00113.00233.展开更多
Casting experiments and macro-micro numerical simulations were conducted to examine the microstructure characteristics of K439B nickel-based superalloy casting with varying cross-sections during the gravity investment...Casting experiments and macro-micro numerical simulations were conducted to examine the microstructure characteristics of K439B nickel-based superalloy casting with varying cross-sections during the gravity investment casting process.Firstly,microstructure analysis was conducted on the casting using scanning electron microscopy(SEM)and electron backscatter diffraction(EBSD).Subsequently,calculation of the phase diagram and differential scanning calorimetry(DSC)tests were conducted to determine the macro-micro simulation parameters of the K439B alloy,and the cellular automaton finite element(CAFE)method was employed to develop macro-micro modeling of K439B nickel-based superalloy casting with varying cross-sections.The experimental results revealed that the ratio of the average grain area increased from the edge to the center of the sections as the ratio of the cross-sectional area increased.The simulation results indicated that the average grain area increased from 0.885 to 0.956 mm^(2)as the ratio of the cross-sections increased from 6꞉1 to 12꞉1.The experiment and simulation results showed that the grain size became more heterogeneous and the grain shape became more irregular with an increase in the ratio of the cross-sectional area of the casting.CAFE modeling was an effective method to simulate the microstructure evolution of the K439B alloy and ensure the accuracy of the simulation.展开更多
Objective This study aimed to determine the temporal trends in sleep duration among Chinese adults.Methods In this series of repeated nationally representative cross-sectional surveys(China Chronic Disease and Risk Fa...Objective This study aimed to determine the temporal trends in sleep duration among Chinese adults.Methods In this series of repeated nationally representative cross-sectional surveys(China Chronic Disease and Risk Factors Surveillance)conducted between 2010 and 2018,a total of 645,420 adult participants(97,741 in 2010;175,749 in 2013;187,777 in 2015;and 184,153 in 2018)were included in the trend analysis.Linear and logistic regression models were utilized to assess trends in sleep duration.Results In 2018,the estimated overall mean sleep duration among the Chinese adult population was7.58(SD,1.45)hours per day,with no significant trend from 2010.A significant increase in short sleep duration(≤6 hours)was observed in the total population,from 15.3%(95%CI:14.1%–16.5%)in 2010 to18.5%(95%CI:17.7%–19.3%)in 2018(P<0.001).Similarly,the trend in long sleep duration(>9 hours)was also significant,increasing in weighted prevalence from 7.2%(95%CI:6.3%–8.1%)in 2010 to 9.0%(95%CI:8.2%–9.9%)in 2018(P<0.001).Conclusion The prevalence of both short and long sleep durations significantly increased among Chinese adults from 2010 to 2018,highlighting the urgency of health initiatives to promote optimal sleep duration in China.展开更多
A bimorph piezoelectric beam with periodically variable cross-sections is used for the vibration energy harvesting. The effects of two geometrical parameters on the first band gap of this periodic beam are investigate...A bimorph piezoelectric beam with periodically variable cross-sections is used for the vibration energy harvesting. The effects of two geometrical parameters on the first band gap of this periodic beam are investigated by the generalized differential quadrature rule （GDQR） method. The GDQR method is also used to calculate the forced vibration response of the beam and voltage of each piezoelectric layer when the beam is subject to a sinusoidal base excitation. Results obtained from the analytical method are compared with those obtained from the finite element simulation with ANSYS, and good agreement is found. The voltage output of this periodic beam over its first band gap is calculated and compared with the voltage output of the uniform piezoelectric beam. It is concluded that this periodic beam has three advantages over the uniform piezoelectric beam, i.e., generating more voltage outputs over a wide frequency range, absorbing vibration, and being less weight.展开更多
Tunnel deformation monitoring is a crucial task to evaluate tunnel stability during the metro operation period.Terrestrial Laser Scanning(TLS)can collect high density and high accuracy point cloud data in a few minute...Tunnel deformation monitoring is a crucial task to evaluate tunnel stability during the metro operation period.Terrestrial Laser Scanning(TLS)can collect high density and high accuracy point cloud data in a few minutes as an innovation technique,which provides promising applications in tunnel deformation monitoring.Here,an efficient method for extracting tunnel cross-sections and convergence analysis using dense TLS point cloud data is proposed.First,the tunnel orientation is determined using principal component analysis(PCA)in the Euclidean plane.Two control points are introduced to detect and remove the unsuitable points by using point cloud division and then the ground points are removed by defining an elevation value width of 0.5 m.Next,a z-score method is introduced to detect and remove the outlies.Because the tunnel cross-section’s standard shape is round,the circle fitting is implemented using the least-squares method.Afterward,the convergence analysis is made at the angles of 0°,30°and 150°.The proposed approach’s feasibility is tested on a TLS point cloud of a Nanjing subway tunnel acquired using a FARO X330 laser scanner.The results indicate that the proposed methodology achieves an overall accuracy of 1.34 mm,which is also in agreement with the measurements acquired by a total station instrument.The proposed methodology provides new insights and references for the applications of TLS in tunnel deformation monitoring,which can also be extended to other engineering applications.展开更多
In this study,K and L shell photoeffect cross-sections were measured for the elements in the range of 50≤Z≤65at 59.5keV.These photoeffect cross-sections were measured by using the experimentalσKαproduction cross-s...In this study,K and L shell photoeffect cross-sections were measured for the elements in the range of 50≤Z≤65at 59.5keV.These photoeffect cross-sections were measured by using the experimentalσKαproduction cross-section values measured in this paper and two different K shell fluorescence yield values in the literature.The results were compared with the calculated theoretical values.The values were plotted versus atomic number.展开更多
The state-selective cross section data are useful for understanding and modeling the x-ray emission in celestial observations.In the present work,using the cold target recoil ion momentum spectroscopy,for the first ti...The state-selective cross section data are useful for understanding and modeling the x-ray emission in celestial observations.In the present work,using the cold target recoil ion momentum spectroscopy,for the first time we investigated the state-selective single electron capture processes for S^(q+)–He and H_(2)(q=11–15)collision systems at an impact energy of q×20 keV and obtained the relative state-selective cross sections.The results indicate that only a few principal quantum states of the projectile energy level are populated in a single electron capture process.In particular,the increase of the projectile charge state leads to the population of the states with higher principal quantum numbers.It is also shown that the experimental averaged n-shell populations are reproduced well by the over-barrier model.The database is openly available in Science Data Bank at 10.57760/sciencedb.j00113.00091.展开更多
The aim of this study was to compare mandibular form （i.e., size and shape） between patients with agenesis of the lower second premolar （P2） and a control group with no agenesis. Three hypotheses were tested： （H...The aim of this study was to compare mandibular form （i.e., size and shape） between patients with agenesis of the lower second premolar （P2） and a control group with no agenesis. Three hypotheses were tested： （H1） agenesis causes a change in mandibular morphology because of inadequate alveolar ridge development in the area of the missing tooth （mandibular plasticity）; （H2） agenesis is caused by spatial limitations within the mandible （dental plasticity）; and （H3） common genetic/ epigenetic factors cause agenesis and affect mandibular form （pleiotropy）. A geometric morphometric analysis was applied to cross-sectional images of computed tomography （CT） scans of three matched groups （n= 50 each）： （1） regularly erupted P2; （2） agenesis of P2 and the primary second molar in situ; and （3） agenesis of P2 and the primary second molar missing for 〉3 months. Cross-sections of the three areas of interest （first premolar, P2, first molar） were digitized with 23 landmarks and superimposed by a generalized Procrustes analysis. On average, the mandibular cross-sections were narrower and shorter in patients with P2 agenesis compared with that in the control group. Both agenesis groups featured a pronounced submandibular fossa. These differences extended at least one tooth beyond the agenesis-affected region. Taken together with the large interindividual variation that resulted in massively overlapping group distributions, these findings support genetic and/or epigenetic pleiotropy （H3） as the most likely origin of the observed covariation between mandibular form and odontogenesis. Clinically, reduced dimensions and greater variability of mandibular form, as well as a pronounced submandibular fossa, should be expected during the treatment planning of patients with P2 agenesis.展开更多
An alternative expression for photoionization cross-section of atoms or molecules and a dielectric influence function （DIF） in a high-density system proposed recently are used to study the photoionization cross-sect...An alternative expression for photoionization cross-section of atoms or molecules and a dielectric influence function （DIF） in a high-density system proposed recently are used to study the photoionization cross-sections of solid silver. It is suggested that a density turning point （DTP） of a photoionized system may be viewed as the critical point where the photoionization properties of atoms in a real system may have a notable change. The results show that the present theoretical photoionization cross-sections are in good agreement with the experimental results of a silver crystal both in structure and in magnitude.展开更多
Large Eddy Simulation(LES)has been employed for the investigation of supersonic flow characteristics in five ducts with varying cross-sectional geometries.The numerical results reveal that flow channel configurations ...Large Eddy Simulation(LES)has been employed for the investigation of supersonic flow characteristics in five ducts with varying cross-sectional geometries.The numerical results reveal that flow channel configurations exert a considerable influence on the mainstream flow and the near-wall flow behavior.In contrast to straight ducts,square-to-circular and rectangular-to-circular ducts exhibit thicker boundary layers and a greater presence of vortex structures.Given the same inlet area,rectangular-to-circular ducts lead to higher flow drag force and total pressure loss than square-to-circular ducts.Characterized by the substantial flow separation and shock waves,the"S-shaped duct shows significant vertically-asymmetric characteristics.展开更多
The non-dissociative charge-transfer processes in collisions between O^3＋ and H2 are investigated by using the quantum-mechanical molecular-orbital coupled-channel （QMOCC） method. The adiabatic potentials and radia...The non-dissociative charge-transfer processes in collisions between O^3＋ and H2 are investigated by using the quantum-mechanical molecular-orbital coupled-channel （QMOCC） method. The adiabatic potentials and radial coupling matrix elements utilized in the QMOCC calculations are obtained with the spin-coupled valence-bond approach. Electronic and vibrational state-selective differential cross sections are presented for projectile energies of 0.1, 1.0 and 10.0eV/u in the H2 orientation angles of 45° and 89°. The electronic and the vibrational state-selective differential cross sections show similar behaviours： they decrease as the scattering angle increases, and beyond a specific angle the oscillating structures appear. Moreover, it is also found that the vibrational state-selective differential cross sections are strongly orientation-dependent, which provides a possibility to determine the orientations of molecule H2 by identifying the vibrational state-selective differential scattering processes.展开更多
A new method for reconstructing a 3-dimensional object from serial cross-sectionsis presented in this paper.The method is based on the principle of sampling and considersevery point in cross-sections as a sampling poi...A new method for reconstructing a 3-dimensional object from serial cross-sectionsis presented in this paper.The method is based on the principle of sampling and considersevery point in cross-sections as a sampling point and performs the interpolating of nonlinearfunction with these sampling points.Compared with other methods,this method has manyadvantages such as higher precision and fewer requested known sampling points.The result ofreconstruction with this method is an“entity”which involves the exterior shape and interiorconstruction information of the object simultaneously.展开更多
Triple differential cross sections (TDCS) are estimated for the ionization of metastable 3d-state hydrogen atoms by electron at 250 eV for various kinematic conditions pursuing a multiple scattering theory. The presen...Triple differential cross sections (TDCS) are estimated for the ionization of metastable 3d-state hydrogen atoms by electron at 250 eV for various kinematic conditions pursuing a multiple scattering theory. The present new results are compared with the theoretical results of hydrogenic different metastable states as well as the hydrogenic ground state experimental data. Obtained new finding results are in good qualitative agreement with those of compared theories. The present results give an immense opportunity for experimental trial in the field of ionization problems.展开更多
Objective The relationship between non-high-density lipoprotein(NHDL)cholesterol to high-density lipoprotein cholesterol(HDL-C)ratio(NHHR)and stoke remains unknown.This study aimed to evaluate the association between ...Objective The relationship between non-high-density lipoprotein(NHDL)cholesterol to high-density lipoprotein cholesterol(HDL-C)ratio(NHHR)and stoke remains unknown.This study aimed to evaluate the association between the adult NHHR and stroke occurrence in the United States of America(USA).Methods To clarify the relationship between the NHHR and stroke risk,this study used a multivariable logistic regression model and a restricted cubic spline(RCS)model to investigate the association between the NHHR and stroke,and data from the National Health and Nutrition Examination Survey(NHANES)from 2005 to 2018.Subgroup and sensitivity analyses were conducted to test the robustness of the results.Results This study included 29,928 adult participants,of which 1,165 participants had a history of stroke.Logistic regression analysis of variables demonstrated a positive association between NHHR and stroke(OR 1.24,95%CI:1.03-1.50,P=0.026).Compared with the lowest reference group of NHHR,participants in the second,third,and fourth quartile had a significantly increased risk of stroke after full adjustments(OR:1.35,95%CI:1.08-1.69)(OR:1.83,95%CI:1.42-2.36)(OR:2.04,95%CI:1.50-2.79).In the total population,a nonlinear dose-response relationship was observed between the NHHR and stroke risk(P non-linearity=0.002).This association remained significant in several subgroup analyses.Further investigation of the NHHR may enhance our understanding of stroke prevention and treatment.Conclusion Our findings suggest a positive correlation between the NHHR and an increased prevalence of stroke,potentially serving as a novel predictive factor for stroke.Timely intervention and management of the NHHR may effectively mitigate stroke occurrence.Prospective studies are required to validate this association and further explore the underlying biological mechanisms.展开更多
Interest has recently emerged in potential applications of(n,2n)reactions of unstable nuclei.Challenges have arisen because of the scarcity of experimental cross-sectional data.This study aims to predict the(n,2n)reac...Interest has recently emerged in potential applications of(n,2n)reactions of unstable nuclei.Challenges have arisen because of the scarcity of experimental cross-sectional data.This study aims to predict the(n,2n)reaction cross-section of long-lived fission products based on a tensor model.This tensor model is an extension of the collaborative filtering algorithm used for nuclear data.It is based on tensor decomposition and completion to predict(n,2n)reaction cross-sections;the corresponding EXFOR data are applied as training data.The reliability of the proposed tensor model was validated by comparing the calculations with data from EXFOR and different databases.Predictions were made for long-lived fission products such as^(60)Co,^(79)Se,^(93)Zr,^(107)P,^(126)Sn,and^(137)Cs,which provide a predicted energy range to effectively transmute long-lived fission products into shorter-lived or less radioactive isotopes.This method could be a powerful tool for completing(n,2n)reaction cross-sectional data and shows the possibility of selective transmutation of nuclear waste.展开更多
Viewing gravitational energy-momentum PG<sup style='margin-left:-7px;'>μ as equal by observation, but different in essence from inertial energy-momentum PI<sup style='margin-left:-7px;'>μ...Viewing gravitational energy-momentum PG<sup style='margin-left:-7px;'>μ as equal by observation, but different in essence from inertial energy-momentum PI<sup style='margin-left:-7px;'>μ naturally leads to the gauge theory of volume-preserving diffeomorphisms of a four-dimensional inner space. To analyse scattering in this theory, the gauge field is coupled to two Dirac fields with different masses. Based on a generalized LSZ reduction formula the S-matrix element for scattering of two Dirac particles in the gravitational limit and the corresponding scattering cross-section are calculated to leading order in perturbation theory. Taking the non-relativistic limit for one of the initial particles in the rest frame of the other the Rutherford-like cross-section of a non-relativistic particle scattering off an infinitely heavy scatterer calculated quantum mechanically in Newtonian gravity is recovered. This provides a non-trivial test of the gauge field theory of volume-preserving diffeomorphisms as a quantum theory of gravity.展开更多
Based on the unified Hauser–Feshbach and exciton model,which can describe the particle emission processes between discrete energy levels with energy,angular momentum,and parity conservations,a statistical theory of l...Based on the unified Hauser–Feshbach and exciton model,which can describe the particle emission processes between discrete energy levels with energy,angular momentum,and parity conservations,a statistical theory of light nucleus reaction(STLN)is developed to calculate the double-differential cross-sections of the outgoing neutron and light charged particles for the proton-induced^(6) Li reaction.A significant difference is observed between the p+^(6) Li and p+^(7) Li reactions owing to the discrepancies in the energy-level structures of the targets.The reaction channels,including sequential and simultaneous emission processes,are analyzed in detail.Taking the double-differential cross-sections of the outgoing proton as an example,the influence of contaminations(such as^(1) H,^(7)Li,^(12)C,and^(16)O)on the target is identified in terms of the kinetic energy of the first emitted particles.The optical potential parameters of the proton are obtained by fitting the elastic scattering differential cross-sections.The calculated total double-differential cross-sections of the outgoing proton and deuteron at E_(p)=14 MeV agree well with the experimental data for different outgoing angles.Simultaneously,the mixed double differential cross-sections of^(3) He andαare in good agreement with the measurements.The agreement between the measured data and calculated results indicates that the two-body and three-body breakup reactions need to be considered,and the pre-equilibrium reaction mechanism dominates the reaction processes.Based on the STLN model,a PLUNF code for the p+^(6) Li reaction is developed to obtain an ENDF-6-formatted file of the double-differential cross-sections of the nucleon and light composite charged particles.展开更多
The umbilical,a key component in offshore energy extraction,plays a vital role in ensuring the stable operation of the entire production system.The extensive variety of cross-sectional components creates highly comple...The umbilical,a key component in offshore energy extraction,plays a vital role in ensuring the stable operation of the entire production system.The extensive variety of cross-sectional components creates highly complex layout combinations.Furthermore,due to constraints in component quantity and geometry within the cross-sectional layout,filler bodies must be incorporated to maintain cross-section performance.Conventional design approaches based on manual experience suffer from inefficiency,high variability,and difficulties in quantification.This paper presents a multi-level automatic filling optimization design method for umbilical cross-sectional layouts to address these limitations.Initially,the research establishes a multi-objective optimization model that considers compactness,balance,and wear resistance of the cross-section,employing an enhanced genetic algorithm to achieve a near-optimal layout.Subsequently,the study implements an image processing-based vacancy detection technique to accurately identify cross-sectional gaps.To manage the variability and diversity of these vacant regions,the research introduces a multi-level filling method that strategically selects and places filler bodies of varying dimensions,overcoming the constraints of uniform-size fillers.Additionally,the method incorporates a hierarchical strategy that subdivides the complex cross-section into multiple layers,enabling layer-by-layer optimization and filling.This approach reduces manufac-turing equipment requirements while ensuring practical production process feasibility.The methodology is validated through a specific umbilical case study.The results demonstrate improvements in compactness,balance,and wear resistance compared with the initial cross-section,offering novel insights and valuable references for filler design in umbilical cross-sections.展开更多
OBJECTIVE:To investigate the difference in gut microbiota between population with damp-heat constitution(DHC)and balanced constitution(BC).METHODS:A multi-centered cross-sectional casecontrol study was conducted,which...OBJECTIVE:To investigate the difference in gut microbiota between population with damp-heat constitution(DHC)and balanced constitution(BC).METHODS:A multi-centered cross-sectional casecontrol study was conducted,which included 249 participants with damp-heat constitution or balanced constitution.Baseline information of participants was collected,and stool samples were collected for gut microbiota analysis.Principal coordinate analysis,linear discriminant analysis effect size analysis,receiver operating characteristic,random forest model,and phylogenetic investigation of communities by reconstruction of unobserved states methods were used to reveal the relationship between gut microbiota and the damp-heat constitution.RESULTS:Compared to those in the BC group,the richness and diversity of the microbiota,specifically those of several short-chain fatty acid producing genera such as Barnesiella,Coprobacter,and Butyricimonas,were significantly decreased in the DHC group.Regarding biological functions,flavonoid biosynthesis,propanoate metabolism,and nucleotide sugar metabolism were suppressed,while arachidonic acid metabolism and glutathione metabolism were enriched in the DHC group.Finally,a classifier based on the microbiota was constructed to discriminate between the DHC and BC populations.CONCLUSION:The gut microbiota of the DHC population exhibits significantly reduced diversity and is closely related to inflammation,metabolic disorders,and liver steatosis,which is consistent with clinical observations,thus serving as a potential diagnostic tool for traditional Chinese medicine constitution discrimination.展开更多
Objective:Postpartum nutrition plays a critical role in maternal recovery and long-term health.However,the nutritional status of working mothers in the postpartum period remains understudied.This study aimed to assess...Objective:Postpartum nutrition plays a critical role in maternal recovery and long-term health.However,the nutritional status of working mothers in the postpartum period remains understudied.This study aimed to assess the dietary quality of postpartum women in urban Beijing,identify occupational-related factors influencing their diet,and explore potential interventions to improve maternal nutrition during the postpartum period.Methods:In this cross-sectional analysis,554 women one year after delivery were recruited from ten community health centers.Sociodemographic,occupational and postpartum care variables were collected via questionnaire.Dietary intake over the preceding year was assessed using a food frequency questionnaire.The modified dietary balance index for postpartum women were used for dietary quality assessment.Results:The study revealed severe dietary imbalances among postpartum women,characterized by excessive consumption of cereals,eggs,and meats,while their intake of vegetables,fruits,and dairy products was inadequate.According to dietary balance index for postpartum women,66.25%of mothers showed varying degrees of excessive intake.45.31%of mothers experienced varying levels of insufficient intake,with only 19.86%of participants having a relatively balanced diet.Occupational differences were observed,with women in the commercial employment group showing higher levels of excessive food intake.The analysis of influencing factors showed that family monthly income,maternity leave,and postpartum care significantly affected the dietary quality.Conclusions:Postpartum women in Beijing experience widespread dietary imbalances,with both excesses and deficiencies.Occupational context and related factors significantly shape diet quality.These findings highlight the need for targeted nutritional interventions tailored to the specific challenges of different occupational groups.展开更多
基金Project supported by the National Key Research and Development Program of China(Grant No.2022YFA1602500)the National Natural Science Foundation of China(Grant No.11974358)。
文摘State-selective single-and double-electron capture processes in collisions of S^(5+)ions with helium at energies ranging from 50.8 keV to 100 keV were investigated using cold target recoil ion momentum spectroscopy(COLTRIMS).Q-value spectra and projectile scattering angle distributions were obtained.For single-electron capture,single electron capture into n=3 states of the projectile ion is dominant.As the projectile energy increases,the contribution of single electron capture into n=4 states is observed.Experimental relative cross-sections for single-electron capture into different projectile final states were compared with theoretical predictions based on the molecular orbital close-coupling(MOCC)method.In double-electron capture,two-electron populating into the 3s^(2)3p and 3s3p^(2)states of projectile dominates.The reaction window calculated from the classical molecular Coulombic barrier model can qualitatively explain the experimental results.The scattering angle distribution of the multi-peak structure of the double-electron capture process is observed.The database is openly available in Science Data Bank at https://doi.org/10.57760/sciencedb.j00113.00233.
基金supported by the National Science and Technology Major Project of China(No.J2019-VI-0004-0117)。
文摘Casting experiments and macro-micro numerical simulations were conducted to examine the microstructure characteristics of K439B nickel-based superalloy casting with varying cross-sections during the gravity investment casting process.Firstly,microstructure analysis was conducted on the casting using scanning electron microscopy(SEM)and electron backscatter diffraction(EBSD).Subsequently,calculation of the phase diagram and differential scanning calorimetry(DSC)tests were conducted to determine the macro-micro simulation parameters of the K439B alloy,and the cellular automaton finite element(CAFE)method was employed to develop macro-micro modeling of K439B nickel-based superalloy casting with varying cross-sections.The experimental results revealed that the ratio of the average grain area increased from the edge to the center of the sections as the ratio of the cross-sectional area increased.The simulation results indicated that the average grain area increased from 0.885 to 0.956 mm^(2)as the ratio of the cross-sections increased from 6꞉1 to 12꞉1.The experiment and simulation results showed that the grain size became more heterogeneous and the grain shape became more irregular with an increase in the ratio of the cross-sectional area of the casting.CAFE modeling was an effective method to simulate the microstructure evolution of the K439B alloy and ensure the accuracy of the simulation.
基金supported by the National Natural Science Foundation of China(82341245,82371491)the Chinese Central Government(Key Project of Public Health Program)the National Key Research and Development Program of China(2018YFC1311706,2018YFC1311702)。
文摘Objective This study aimed to determine the temporal trends in sleep duration among Chinese adults.Methods In this series of repeated nationally representative cross-sectional surveys(China Chronic Disease and Risk Factors Surveillance)conducted between 2010 and 2018,a total of 645,420 adult participants(97,741 in 2010;175,749 in 2013;187,777 in 2015;and 184,153 in 2018)were included in the trend analysis.Linear and logistic regression models were utilized to assess trends in sleep duration.Results In 2018,the estimated overall mean sleep duration among the Chinese adult population was7.58(SD,1.45)hours per day,with no significant trend from 2010.A significant increase in short sleep duration(≤6 hours)was observed in the total population,from 15.3%(95%CI:14.1%–16.5%)in 2010 to18.5%(95%CI:17.7%–19.3%)in 2018(P<0.001).Similarly,the trend in long sleep duration(>9 hours)was also significant,increasing in weighted prevalence from 7.2%(95%CI:6.3%–8.1%)in 2010 to 9.0%(95%CI:8.2%–9.9%)in 2018(P<0.001).Conclusion The prevalence of both short and long sleep durations significantly increased among Chinese adults from 2010 to 2018,highlighting the urgency of health initiatives to promote optimal sleep duration in China.
文摘A bimorph piezoelectric beam with periodically variable cross-sections is used for the vibration energy harvesting. The effects of two geometrical parameters on the first band gap of this periodic beam are investigated by the generalized differential quadrature rule （GDQR） method. The GDQR method is also used to calculate the forced vibration response of the beam and voltage of each piezoelectric layer when the beam is subject to a sinusoidal base excitation. Results obtained from the analytical method are compared with those obtained from the finite element simulation with ANSYS, and good agreement is found. The voltage output of this periodic beam over its first band gap is calculated and compared with the voltage output of the uniform piezoelectric beam. It is concluded that this periodic beam has three advantages over the uniform piezoelectric beam, i.e., generating more voltage outputs over a wide frequency range, absorbing vibration, and being less weight.
基金National Natural Science Foundation of China(No.41801379)Fundamental Research Funds for the Central Universities(No.2019B08414)National Key R&D Program of China(No.2016YFC0401801)。
文摘Tunnel deformation monitoring is a crucial task to evaluate tunnel stability during the metro operation period.Terrestrial Laser Scanning(TLS)can collect high density and high accuracy point cloud data in a few minutes as an innovation technique,which provides promising applications in tunnel deformation monitoring.Here,an efficient method for extracting tunnel cross-sections and convergence analysis using dense TLS point cloud data is proposed.First,the tunnel orientation is determined using principal component analysis(PCA)in the Euclidean plane.Two control points are introduced to detect and remove the unsuitable points by using point cloud division and then the ground points are removed by defining an elevation value width of 0.5 m.Next,a z-score method is introduced to detect and remove the outlies.Because the tunnel cross-section’s standard shape is round,the circle fitting is implemented using the least-squares method.Afterward,the convergence analysis is made at the angles of 0°,30°and 150°.The proposed approach’s feasibility is tested on a TLS point cloud of a Nanjing subway tunnel acquired using a FARO X330 laser scanner.The results indicate that the proposed methodology achieves an overall accuracy of 1.34 mm,which is also in agreement with the measurements acquired by a total station instrument.The proposed methodology provides new insights and references for the applications of TLS in tunnel deformation monitoring,which can also be extended to other engineering applications.
文摘In this study,K and L shell photoeffect cross-sections were measured for the elements in the range of 50≤Z≤65at 59.5keV.These photoeffect cross-sections were measured by using the experimentalσKαproduction cross-section values measured in this paper and two different K shell fluorescence yield values in the literature.The results were compared with the calculated theoretical values.The values were plotted versus atomic number.
基金Project supported by the National Key Research and Development Program of China(Grant No.2017YFA0402400)the National Natural Science Foundation of China(Grant Nos.11974358 and 11934004)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB34020000)the Heavy Ion Research Facility in Lanzhou(HIRFL).
文摘The state-selective cross section data are useful for understanding and modeling the x-ray emission in celestial observations.In the present work,using the cold target recoil ion momentum spectroscopy,for the first time we investigated the state-selective single electron capture processes for S^(q+)–He and H_(2)(q=11–15)collision systems at an impact energy of q×20 keV and obtained the relative state-selective cross sections.The results indicate that only a few principal quantum states of the projectile energy level are populated in a single electron capture process.In particular,the increase of the projectile charge state leads to the population of the states with higher principal quantum numbers.It is also shown that the experimental averaged n-shell populations are reproduced well by the over-barrier model.The database is openly available in Science Data Bank at 10.57760/sciencedb.j00113.00091.
文摘The aim of this study was to compare mandibular form （i.e., size and shape） between patients with agenesis of the lower second premolar （P2） and a control group with no agenesis. Three hypotheses were tested： （H1） agenesis causes a change in mandibular morphology because of inadequate alveolar ridge development in the area of the missing tooth （mandibular plasticity）; （H2） agenesis is caused by spatial limitations within the mandible （dental plasticity）; and （H3） common genetic/ epigenetic factors cause agenesis and affect mandibular form （pleiotropy）. A geometric morphometric analysis was applied to cross-sectional images of computed tomography （CT） scans of three matched groups （n= 50 each）： （1） regularly erupted P2; （2） agenesis of P2 and the primary second molar in situ; and （3） agenesis of P2 and the primary second molar missing for 〉3 months. Cross-sections of the three areas of interest （first premolar, P2, first molar） were digitized with 23 landmarks and superimposed by a generalized Procrustes analysis. On average, the mandibular cross-sections were narrower and shorter in patients with P2 agenesis compared with that in the control group. Both agenesis groups featured a pronounced submandibular fossa. These differences extended at least one tooth beyond the agenesis-affected region. Taken together with the large interindividual variation that resulted in massively overlapping group distributions, these findings support genetic and/or epigenetic pleiotropy （H3） as the most likely origin of the observed covariation between mandibular form and odontogenesis. Clinically, reduced dimensions and greater variability of mandibular form, as well as a pronounced submandibular fossa, should be expected during the treatment planning of patients with P2 agenesis.
基金Project supported by the National Natural Science Foundation of China （Grant No 10474068） and the Natural Science Foundation of Yantai Normal University （Grant No 22270301）.
文摘An alternative expression for photoionization cross-section of atoms or molecules and a dielectric influence function （DIF） in a high-density system proposed recently are used to study the photoionization cross-sections of solid silver. It is suggested that a density turning point （DTP） of a photoionized system may be viewed as the critical point where the photoionization properties of atoms in a real system may have a notable change. The results show that the present theoretical photoionization cross-sections are in good agreement with the experimental results of a silver crystal both in structure and in magnitude.
基金the National Natural Science Foundation of China(Grant Nos.92252206,12102471 and 11925207)。
文摘Large Eddy Simulation(LES)has been employed for the investigation of supersonic flow characteristics in five ducts with varying cross-sectional geometries.The numerical results reveal that flow channel configurations exert a considerable influence on the mainstream flow and the near-wall flow behavior.In contrast to straight ducts,square-to-circular and rectangular-to-circular ducts exhibit thicker boundary layers and a greater presence of vortex structures.Given the same inlet area,rectangular-to-circular ducts lead to higher flow drag force and total pressure loss than square-to-circular ducts.Characterized by the substantial flow separation and shock waves,the"S-shaped duct shows significant vertically-asymmetric characteristics.
基金supported by the National Natural Science Foundation of China (Grant Nos 10574018 and 10574020)
文摘The non-dissociative charge-transfer processes in collisions between O^3＋ and H2 are investigated by using the quantum-mechanical molecular-orbital coupled-channel （QMOCC） method. The adiabatic potentials and radial coupling matrix elements utilized in the QMOCC calculations are obtained with the spin-coupled valence-bond approach. Electronic and vibrational state-selective differential cross sections are presented for projectile energies of 0.1, 1.0 and 10.0eV/u in the H2 orientation angles of 45° and 89°. The electronic and the vibrational state-selective differential cross sections show similar behaviours： they decrease as the scattering angle increases, and beyond a specific angle the oscillating structures appear. Moreover, it is also found that the vibrational state-selective differential cross sections are strongly orientation-dependent, which provides a possibility to determine the orientations of molecule H2 by identifying the vibrational state-selective differential scattering processes.
文摘A new method for reconstructing a 3-dimensional object from serial cross-sectionsis presented in this paper.The method is based on the principle of sampling and considersevery point in cross-sections as a sampling point and performs the interpolating of nonlinearfunction with these sampling points.Compared with other methods,this method has manyadvantages such as higher precision and fewer requested known sampling points.The result ofreconstruction with this method is an“entity”which involves the exterior shape and interiorconstruction information of the object simultaneously.
文摘Triple differential cross sections (TDCS) are estimated for the ionization of metastable 3d-state hydrogen atoms by electron at 250 eV for various kinematic conditions pursuing a multiple scattering theory. The present new results are compared with the theoretical results of hydrogenic different metastable states as well as the hydrogenic ground state experimental data. Obtained new finding results are in good qualitative agreement with those of compared theories. The present results give an immense opportunity for experimental trial in the field of ionization problems.
文摘Objective The relationship between non-high-density lipoprotein(NHDL)cholesterol to high-density lipoprotein cholesterol(HDL-C)ratio(NHHR)and stoke remains unknown.This study aimed to evaluate the association between the adult NHHR and stroke occurrence in the United States of America(USA).Methods To clarify the relationship between the NHHR and stroke risk,this study used a multivariable logistic regression model and a restricted cubic spline(RCS)model to investigate the association between the NHHR and stroke,and data from the National Health and Nutrition Examination Survey(NHANES)from 2005 to 2018.Subgroup and sensitivity analyses were conducted to test the robustness of the results.Results This study included 29,928 adult participants,of which 1,165 participants had a history of stroke.Logistic regression analysis of variables demonstrated a positive association between NHHR and stroke(OR 1.24,95%CI:1.03-1.50,P=0.026).Compared with the lowest reference group of NHHR,participants in the second,third,and fourth quartile had a significantly increased risk of stroke after full adjustments(OR:1.35,95%CI:1.08-1.69)(OR:1.83,95%CI:1.42-2.36)(OR:2.04,95%CI:1.50-2.79).In the total population,a nonlinear dose-response relationship was observed between the NHHR and stroke risk(P non-linearity=0.002).This association remained significant in several subgroup analyses.Further investigation of the NHHR may enhance our understanding of stroke prevention and treatment.Conclusion Our findings suggest a positive correlation between the NHHR and an increased prevalence of stroke,potentially serving as a novel predictive factor for stroke.Timely intervention and management of the NHHR may effectively mitigate stroke occurrence.Prospective studies are required to validate this association and further explore the underlying biological mechanisms.
基金supported by the Key Laboratory of Nuclear Data foundation(No.JCKY2022201C157)。
文摘Interest has recently emerged in potential applications of(n,2n)reactions of unstable nuclei.Challenges have arisen because of the scarcity of experimental cross-sectional data.This study aims to predict the(n,2n)reaction cross-section of long-lived fission products based on a tensor model.This tensor model is an extension of the collaborative filtering algorithm used for nuclear data.It is based on tensor decomposition and completion to predict(n,2n)reaction cross-sections;the corresponding EXFOR data are applied as training data.The reliability of the proposed tensor model was validated by comparing the calculations with data from EXFOR and different databases.Predictions were made for long-lived fission products such as^(60)Co,^(79)Se,^(93)Zr,^(107)P,^(126)Sn,and^(137)Cs,which provide a predicted energy range to effectively transmute long-lived fission products into shorter-lived or less radioactive isotopes.This method could be a powerful tool for completing(n,2n)reaction cross-sectional data and shows the possibility of selective transmutation of nuclear waste.
文摘Viewing gravitational energy-momentum PG<sup style='margin-left:-7px;'>μ as equal by observation, but different in essence from inertial energy-momentum PI<sup style='margin-left:-7px;'>μ naturally leads to the gauge theory of volume-preserving diffeomorphisms of a four-dimensional inner space. To analyse scattering in this theory, the gauge field is coupled to two Dirac fields with different masses. Based on a generalized LSZ reduction formula the S-matrix element for scattering of two Dirac particles in the gravitational limit and the corresponding scattering cross-section are calculated to leading order in perturbation theory. Taking the non-relativistic limit for one of the initial particles in the rest frame of the other the Rutherford-like cross-section of a non-relativistic particle scattering off an infinitely heavy scatterer calculated quantum mechanically in Newtonian gravity is recovered. This provides a non-trivial test of the gauge field theory of volume-preserving diffeomorphisms as a quantum theory of gravity.
基金supported by the National Natural Science Foundation of China(No.12065003)the Guangxi Key R&D Project(2023AB07029)+1 种基金the Scientific Research and Technology Development Project of Guilin(20210104-2)the Central Government Guides Local Scientific and Technological Development Funds of China(Guike ZY22096024)。
文摘Based on the unified Hauser–Feshbach and exciton model,which can describe the particle emission processes between discrete energy levels with energy,angular momentum,and parity conservations,a statistical theory of light nucleus reaction(STLN)is developed to calculate the double-differential cross-sections of the outgoing neutron and light charged particles for the proton-induced^(6) Li reaction.A significant difference is observed between the p+^(6) Li and p+^(7) Li reactions owing to the discrepancies in the energy-level structures of the targets.The reaction channels,including sequential and simultaneous emission processes,are analyzed in detail.Taking the double-differential cross-sections of the outgoing proton as an example,the influence of contaminations(such as^(1) H,^(7)Li,^(12)C,and^(16)O)on the target is identified in terms of the kinetic energy of the first emitted particles.The optical potential parameters of the proton are obtained by fitting the elastic scattering differential cross-sections.The calculated total double-differential cross-sections of the outgoing proton and deuteron at E_(p)=14 MeV agree well with the experimental data for different outgoing angles.Simultaneously,the mixed double differential cross-sections of^(3) He andαare in good agreement with the measurements.The agreement between the measured data and calculated results indicates that the two-body and three-body breakup reactions need to be considered,and the pre-equilibrium reaction mechanism dominates the reaction processes.Based on the STLN model,a PLUNF code for the p+^(6) Li reaction is developed to obtain an ENDF-6-formatted file of the double-differential cross-sections of the nucleon and light composite charged particles.
基金financially supported by Guangdong Province Basic and Applied Basic Research Fund Project(Grant No.2022B1515250009)Liaoning Provincial Natural Science Foundation-Doctoral Research Start-up Fund Project(Grant No.2024-BSBA-05)+1 种基金Major Science and Technology Innovation Project in Shandong Province(Grant No.2024CXGC010803)the National Natural Science Foundation of China(Grant Nos.52271269 and 12302147).
文摘The umbilical,a key component in offshore energy extraction,plays a vital role in ensuring the stable operation of the entire production system.The extensive variety of cross-sectional components creates highly complex layout combinations.Furthermore,due to constraints in component quantity and geometry within the cross-sectional layout,filler bodies must be incorporated to maintain cross-section performance.Conventional design approaches based on manual experience suffer from inefficiency,high variability,and difficulties in quantification.This paper presents a multi-level automatic filling optimization design method for umbilical cross-sectional layouts to address these limitations.Initially,the research establishes a multi-objective optimization model that considers compactness,balance,and wear resistance of the cross-section,employing an enhanced genetic algorithm to achieve a near-optimal layout.Subsequently,the study implements an image processing-based vacancy detection technique to accurately identify cross-sectional gaps.To manage the variability and diversity of these vacant regions,the research introduces a multi-level filling method that strategically selects and places filler bodies of varying dimensions,overcoming the constraints of uniform-size fillers.Additionally,the method incorporates a hierarchical strategy that subdivides the complex cross-section into multiple layers,enabling layer-by-layer optimization and filling.This approach reduces manufac-turing equipment requirements while ensuring practical production process feasibility.The methodology is validated through a specific umbilical case study.The results demonstrate improvements in compactness,balance,and wear resistance compared with the initial cross-section,offering novel insights and valuable references for filler design in umbilical cross-sections.
基金National Nonprofit Institute Research Grant for the Institute of Basic Theory for Chinese Medicine,China Academy of Chinese Medical Sciences:Mechanism of Regulating Phlegm-Dampness Constitution to Prevent Metabolic Diseases based on Gut Microbiota-host DNA Methylation(No.YZ-202151)。
文摘OBJECTIVE:To investigate the difference in gut microbiota between population with damp-heat constitution(DHC)and balanced constitution(BC).METHODS:A multi-centered cross-sectional casecontrol study was conducted,which included 249 participants with damp-heat constitution or balanced constitution.Baseline information of participants was collected,and stool samples were collected for gut microbiota analysis.Principal coordinate analysis,linear discriminant analysis effect size analysis,receiver operating characteristic,random forest model,and phylogenetic investigation of communities by reconstruction of unobserved states methods were used to reveal the relationship between gut microbiota and the damp-heat constitution.RESULTS:Compared to those in the BC group,the richness and diversity of the microbiota,specifically those of several short-chain fatty acid producing genera such as Barnesiella,Coprobacter,and Butyricimonas,were significantly decreased in the DHC group.Regarding biological functions,flavonoid biosynthesis,propanoate metabolism,and nucleotide sugar metabolism were suppressed,while arachidonic acid metabolism and glutathione metabolism were enriched in the DHC group.Finally,a classifier based on the microbiota was constructed to discriminate between the DHC and BC populations.CONCLUSION:The gut microbiota of the DHC population exhibits significantly reduced diversity and is closely related to inflammation,metabolic disorders,and liver steatosis,which is consistent with clinical observations,thus serving as a potential diagnostic tool for traditional Chinese medicine constitution discrimination.
基金supported by an Innovation Fund for Medical Sciences of the Chinese Academy of Medical Sciences (Grant No.2019-I2M-2-007).
文摘Objective:Postpartum nutrition plays a critical role in maternal recovery and long-term health.However,the nutritional status of working mothers in the postpartum period remains understudied.This study aimed to assess the dietary quality of postpartum women in urban Beijing,identify occupational-related factors influencing their diet,and explore potential interventions to improve maternal nutrition during the postpartum period.Methods:In this cross-sectional analysis,554 women one year after delivery were recruited from ten community health centers.Sociodemographic,occupational and postpartum care variables were collected via questionnaire.Dietary intake over the preceding year was assessed using a food frequency questionnaire.The modified dietary balance index for postpartum women were used for dietary quality assessment.Results:The study revealed severe dietary imbalances among postpartum women,characterized by excessive consumption of cereals,eggs,and meats,while their intake of vegetables,fruits,and dairy products was inadequate.According to dietary balance index for postpartum women,66.25%of mothers showed varying degrees of excessive intake.45.31%of mothers experienced varying levels of insufficient intake,with only 19.86%of participants having a relatively balanced diet.Occupational differences were observed,with women in the commercial employment group showing higher levels of excessive food intake.The analysis of influencing factors showed that family monthly income,maternity leave,and postpartum care significantly affected the dietary quality.Conclusions:Postpartum women in Beijing experience widespread dietary imbalances,with both excesses and deficiencies.Occupational context and related factors significantly shape diet quality.These findings highlight the need for targeted nutritional interventions tailored to the specific challenges of different occupational groups.
