This paper investigates the start-up and shutdown phases of a five-bladed closed-impeller centrifugal pump through experimental analysis,capturing the temporal evolution of its hydraulic performances.The study also pr...This paper investigates the start-up and shutdown phases of a five-bladed closed-impeller centrifugal pump through experimental analysis,capturing the temporal evolution of its hydraulic performances.The study also predicts the transient characteristics of the pump under non-rated operating conditions to assess the accuracy of various machine learning methods in forecasting its instantaneous performance.Results indicate that the pump’s transient behavior in power-frequency mode markedly differs from that in frequency-conversion mode.Specifically,the power-frequency mode achieves steady-state values faster and exhibits smaller fluctuations before stabilization compared to the other mode.During the start-up phase,as the steady-state flow rate increases,inlet and outlet pressures and head also rise,while torque and shaft power decrease,with rotational speed remaining largely unchanged.Conversely,during the shutdown phase,no significant changes were observed in torque,shaft power,or rotational speed.Six machine learning models,including Gaussian Process Regression(GPR),Decision Tree Regression(DTR),and Deep Learning Networks(DLN),demonstrated high accuracy in predicting the hydraulic performance of the centrifugal pump during the start-up and shutdown phases in both power-frequency and frequency-conversion conditions.The findings provide a theoretical foundation for improved prediction of pump hydraulic performance.For instance,when predicting head and flow rate during power-frequency start-up,GPR achieved absolute and relative errors of 0.54 m(7.84%)and 0.21 m3/h(13.57%),respectively,while the Feedforward Neural Network(FNN)reported errors of 0.98 m(8.24%)and 0.10 m3/h(16.71%).By contrast,the Support Vector Machine Regression(SVMR)and Generalized Additive Model(GAM)generally yielded less satisfactory prediction accuracy compared to the other methods.展开更多
In the realm of all-electric aircraft research,the integration of cathode-open proton exchange membrane fuel cells(PEMFC)with lithiumbatteries as a hybrid power source for small to medium-sized unmanned aerial vehicle...In the realm of all-electric aircraft research,the integration of cathode-open proton exchange membrane fuel cells(PEMFC)with lithiumbatteries as a hybrid power source for small to medium-sized unmanned aerial vehicles(UAVs)has garnered significant attention.The PEMFC,serving as the primary energy supply,markedly extends the UAV’s operational endurance.However,due to payload limitations and spatial constraints in the airframe layout of UAVs,the stack requires customized adaptation.Moreover,the implementation of auxiliary systems to facilitate cold starts of the PEMFC under low-temperature conditions is not feasible.Relying solely on thermal insulation measures also proves inadequate to address the challenges posed by complex low-temperature startup scenarios.To overcomethis,our study leverages the UAV’s lithium battery to heat the cathode inlet airflow,aiding the cathode-open PEMFC cold start process.To validate the feasibility of the proposed air-assisted heating strategy during the conceptual design phase,this study develops a transient,non-isothermal 3Dcathode-open PEMF Cunitmodel incorporating cathode air-assisted heating and gas-ice phase change.The model’s accuracy was verified against experimental cold-start data from a stack composed of identical single cells.This computational framework enables quantitative analysis of temperature fields and ice fraction distributions across domains under varying air-assisted heating powers during cold starts.Building upon this model,the study further investigates the improvement in cold start performance by heating the cathode intake air with varying power levels.The results demonstrate that the fuel cell achieves self-startup at temperatures as low as−13℃ under a constant current density of 100mA/cm^(2) without air-assisted heating.At an ambient temperature of−20℃,a successful start-up can be achieved with a heating power of 0.45 W/cm^(2).The temperature variation overtime during the cold start process can be represented by a sum of two exponential functions.The air-assisted heating scheme proposed in this study has significantly improved the cold start performance of fuel cells in low-temperature environments.Additionally,it provides critical reference data and validation support for component selection and feasibility assessment of hybrid power systems.展开更多
The ductile-to-brittle transition temperature(DBTT)of high strength steels can be optimized by tailoring microstructure and crystallographic orientation characteristics,where the start cooling temperature plays a key ...The ductile-to-brittle transition temperature(DBTT)of high strength steels can be optimized by tailoring microstructure and crystallographic orientation characteristics,where the start cooling temperature plays a key role.In this work,X70 steels with different start cooling temperatures were prepared through thermo-mechanical control process.The quasi-polygonal ferrite(QF),granular bainite(GB),bainitic ferrite(BF)and martensite-austenite constituents were formed at the start cooling temperatures of 780℃(C1),740℃(C2)and 700℃(C3).As start cooling temperature decreased,the amount of GB decreased,the microstructure of QF and BF increased.Microstructure characteristics of the three samples,such as high-angle grain boundaries(HAGBs),MA constituents and crystallographic orientation,also varied with the start cooling temperatures.C2 sample had the lowest DBTT value(−86℃)for its highest fraction of HAGBs,highest content of<110>oriented grains and lowest content of<001>oriented grains parallel to TD.The high density of{332}<113>and low density of rotated cube{001}<110>textures also contributed to the best impact toughness of C2 sample.In addition,a modified model was used in this paper to quantitatively predict the approximate DBTT value of steels.展开更多
We present a study of the ion stopping power due to free and bound electrons in a warm dense plasma.Our main goal is to propose a method of stopping-power calculation expected to be valid for any ionization degree.The...We present a study of the ion stopping power due to free and bound electrons in a warm dense plasma.Our main goal is to propose a method of stopping-power calculation expected to be valid for any ionization degree.The free-electron contribution is described by the Maynard–Deutsch–Zimmerman formula,and the bound-electron contribution relies on the Bethe formula with corrections,in particular taking into account density and shell effects.The results of the bound-state computation using three different parametric potentials are investigated within the Garbet formalism for the mean excitation energy.The first parametric potential is due to Green,Sellin,and Zachor,the second one was proposed by Yunta,and the third one was introduced by Klapisch in the framework of atomic-structure computations.The results are compared with those of self-consistent average-atom calculations.This approach correctly bridges the limits of neutral and fully ionized matter.展开更多
To address the sensitive and uncertain limitations of single-energy computed tomography(CT)calibration methods in computing proton stopping power ratio during treatment planning,different methods have been proposed us...To address the sensitive and uncertain limitations of single-energy computed tomography(CT)calibration methods in computing proton stopping power ratio during treatment planning,different methods have been proposed using a dual energy CT approach.This paper reviews the most recent dual-energy CT approaches for computing proton stopping power ratio.These include image domain and projection domain methods.The advantages and uncertainties of these methods are analyzed based on existing studies.This paper highlights recent advances in dual energy CT,discussing their implementation,advantages,limitations,and potential for clinical adoption.展开更多
基金financially supported by Science and Technology Project of Quzhou(Grant Nos.2023K256,2023NC08)Research Grants Program of Department of Education of Zhejiang Province(No.Y202455709)+1 种基金Zhejiang Provincial Natural Science Foundation of China(Grant No.LZY21E050001)University-Enterprise Cooperation Program for Visiting Engineers in Higher Education Institutions in Zhejiang Province(No.FG2020215).
文摘This paper investigates the start-up and shutdown phases of a five-bladed closed-impeller centrifugal pump through experimental analysis,capturing the temporal evolution of its hydraulic performances.The study also predicts the transient characteristics of the pump under non-rated operating conditions to assess the accuracy of various machine learning methods in forecasting its instantaneous performance.Results indicate that the pump’s transient behavior in power-frequency mode markedly differs from that in frequency-conversion mode.Specifically,the power-frequency mode achieves steady-state values faster and exhibits smaller fluctuations before stabilization compared to the other mode.During the start-up phase,as the steady-state flow rate increases,inlet and outlet pressures and head also rise,while torque and shaft power decrease,with rotational speed remaining largely unchanged.Conversely,during the shutdown phase,no significant changes were observed in torque,shaft power,or rotational speed.Six machine learning models,including Gaussian Process Regression(GPR),Decision Tree Regression(DTR),and Deep Learning Networks(DLN),demonstrated high accuracy in predicting the hydraulic performance of the centrifugal pump during the start-up and shutdown phases in both power-frequency and frequency-conversion conditions.The findings provide a theoretical foundation for improved prediction of pump hydraulic performance.For instance,when predicting head and flow rate during power-frequency start-up,GPR achieved absolute and relative errors of 0.54 m(7.84%)and 0.21 m3/h(13.57%),respectively,while the Feedforward Neural Network(FNN)reported errors of 0.98 m(8.24%)and 0.10 m3/h(16.71%).By contrast,the Support Vector Machine Regression(SVMR)and Generalized Additive Model(GAM)generally yielded less satisfactory prediction accuracy compared to the other methods.
基金funded by Zhejiang Province Spearhead and Leading Goose Research and Development Key Program,grant number 2023C01239.
文摘In the realm of all-electric aircraft research,the integration of cathode-open proton exchange membrane fuel cells(PEMFC)with lithiumbatteries as a hybrid power source for small to medium-sized unmanned aerial vehicles(UAVs)has garnered significant attention.The PEMFC,serving as the primary energy supply,markedly extends the UAV’s operational endurance.However,due to payload limitations and spatial constraints in the airframe layout of UAVs,the stack requires customized adaptation.Moreover,the implementation of auxiliary systems to facilitate cold starts of the PEMFC under low-temperature conditions is not feasible.Relying solely on thermal insulation measures also proves inadequate to address the challenges posed by complex low-temperature startup scenarios.To overcomethis,our study leverages the UAV’s lithium battery to heat the cathode inlet airflow,aiding the cathode-open PEMFC cold start process.To validate the feasibility of the proposed air-assisted heating strategy during the conceptual design phase,this study develops a transient,non-isothermal 3Dcathode-open PEMF Cunitmodel incorporating cathode air-assisted heating and gas-ice phase change.The model’s accuracy was verified against experimental cold-start data from a stack composed of identical single cells.This computational framework enables quantitative analysis of temperature fields and ice fraction distributions across domains under varying air-assisted heating powers during cold starts.Building upon this model,the study further investigates the improvement in cold start performance by heating the cathode intake air with varying power levels.The results demonstrate that the fuel cell achieves self-startup at temperatures as low as−13℃ under a constant current density of 100mA/cm^(2) without air-assisted heating.At an ambient temperature of−20℃,a successful start-up can be achieved with a heating power of 0.45 W/cm^(2).The temperature variation overtime during the cold start process can be represented by a sum of two exponential functions.The air-assisted heating scheme proposed in this study has significantly improved the cold start performance of fuel cells in low-temperature environments.Additionally,it provides critical reference data and validation support for component selection and feasibility assessment of hybrid power systems.
基金Project(2018XK2301) supported by the Change-Zhu-Tan National Independent Innavation Demonstration Zone Special Program,China。
文摘The ductile-to-brittle transition temperature(DBTT)of high strength steels can be optimized by tailoring microstructure and crystallographic orientation characteristics,where the start cooling temperature plays a key role.In this work,X70 steels with different start cooling temperatures were prepared through thermo-mechanical control process.The quasi-polygonal ferrite(QF),granular bainite(GB),bainitic ferrite(BF)and martensite-austenite constituents were formed at the start cooling temperatures of 780℃(C1),740℃(C2)and 700℃(C3).As start cooling temperature decreased,the amount of GB decreased,the microstructure of QF and BF increased.Microstructure characteristics of the three samples,such as high-angle grain boundaries(HAGBs),MA constituents and crystallographic orientation,also varied with the start cooling temperatures.C2 sample had the lowest DBTT value(−86℃)for its highest fraction of HAGBs,highest content of<110>oriented grains and lowest content of<001>oriented grains parallel to TD.The high density of{332}<113>and low density of rotated cube{001}<110>textures also contributed to the best impact toughness of C2 sample.In addition,a modified model was used in this paper to quantitatively predict the approximate DBTT value of steels.
文摘We present a study of the ion stopping power due to free and bound electrons in a warm dense plasma.Our main goal is to propose a method of stopping-power calculation expected to be valid for any ionization degree.The free-electron contribution is described by the Maynard–Deutsch–Zimmerman formula,and the bound-electron contribution relies on the Bethe formula with corrections,in particular taking into account density and shell effects.The results of the bound-state computation using three different parametric potentials are investigated within the Garbet formalism for the mean excitation energy.The first parametric potential is due to Green,Sellin,and Zachor,the second one was proposed by Yunta,and the third one was introduced by Klapisch in the framework of atomic-structure computations.The results are compared with those of self-consistent average-atom calculations.This approach correctly bridges the limits of neutral and fully ionized matter.
文摘To address the sensitive and uncertain limitations of single-energy computed tomography(CT)calibration methods in computing proton stopping power ratio during treatment planning,different methods have been proposed using a dual energy CT approach.This paper reviews the most recent dual-energy CT approaches for computing proton stopping power ratio.These include image domain and projection domain methods.The advantages and uncertainties of these methods are analyzed based on existing studies.This paper highlights recent advances in dual energy CT,discussing their implementation,advantages,limitations,and potential for clinical adoption.
