The Bypass Dual Throat Nozzle(BDTN)is a novel fluidic Thrust Vectoring(TV)nozzle,it switches to TV state by opening the valve in the bypass.To greatly manipulate the BDTN,the dynamic characteristics in the TV starting...The Bypass Dual Throat Nozzle(BDTN)is a novel fluidic Thrust Vectoring(TV)nozzle,it switches to TV state by opening the valve in the bypass.To greatly manipulate the BDTN,the dynamic characteristics in the TV starting process should be analyzed.This paper conducts numerical simulations to grasp the variation processes of performances and the flow field evolution of BDTN and Dual Throat Nozzle(DTN).The dynamic responses of TV starting in typical DTN models are investigated at first.Then,the TV starting processes of BDTN in different Nozzle Pressure Ratio(NPR)conditions are simulated,and the valve opening durations(T)are also considered.Before the expected TV direction is achieved in the DTN,the jet is deflected to the opposite direction at the beginning of the dynamic process,which is called the reverse TV phenomenon.However,this phenomenon disappears in the BDTN.The larger injection width of DTN intensifies unsteady oscillations,and the reverse TV phenomenon is strengthened.In the BDTN,T determines the delay degree of performance variations compared to the static results,which is called hysteresis effect.At NPR=10,the hysteresis affects the final stable performance of BDTN.This study analyses the dynamic characteristics in DTN and BDTN,laying a foundation for further design of nozzles and control strategies.展开更多
The start-up process of Stokes＇ second problem of a viscoelastic material with fractional element is studied. The fluid above an infinite flat plane is set in motion by a sudden acceleration of the plate to steady os...The start-up process of Stokes＇ second problem of a viscoelastic material with fractional element is studied. The fluid above an infinite flat plane is set in motion by a sudden acceleration of the plate to steady oscillation. Exact solutions are obtained by using Laplace transform and Fourier transform. It is found that the relationship between the first peak value and the one of equal-amplitude oscillations depends on the distance from the plate. The amplitude decreases for increasing frequency and increasing distance.展开更多
A new dynamic non-equilibrium mixing-pool model for simulating start-up and dynamic re-sponse of a distillation column is reported.The proposed model is established on the basis ofconsidering the two dimensional flow/...A new dynamic non-equilibrium mixing-pool model for simulating start-up and dynamic re-sponse of a distillation column is reported.The proposed model is established on the basis ofconsidering the two dimensional flow/mixing behavior of actual trays in a distillation column.Com-parison is made among the computed results of the start-up time and the dynamic response time bythe proposed and five other typical models.It is found that the computed time for both dynamicprocesses is longer by the model which considers any flow/mixing pattern than by the model withoutsuch concern.The inertia effect of flow/mixing seems to be important and can not be ignored inmodeling the transient process of distillation.The proposed model,which is believed to be suitableto large column,seems somewhat useful in predicting industrial distillation dynamics.展开更多
Liquid bipropellant attitude control rocket engines are widely used in satellites,manned spaceships,deep space probes and other spacecraft.The performance of an attitude control engine is directly related to the lifet...Liquid bipropellant attitude control rocket engines are widely used in satellites,manned spaceships,deep space probes and other spacecraft.The performance of an attitude control engine is directly related to the lifetime,control precision and safety of a spacecraft.The study of flow characteristics of an engine transient process is important to improve its performance.In this paper,the transient flow test of a transparent test piece was carried out during the starting process of the attitude control engine.Then the transient process of the test piece was simulated and compared with the test results to verify the rationality of the simulation model.Transient flow simulation was carried out for the starting process of the real engine injector.The results show that the filling of the outer ring of the oxidant circuit is slower than that of the central collecting cavity,and the filling of the second layer of the outer ring is slower than that of the first layer.The filling process in the fuel path starts from the cooling hole near the inlet side and the fuel flows out in the circumferential direction.Installation direction has little influence on engine starting flow process in the ground state.The filling time of the engine in its vacuum state is longer than that in the ground state,the filling time of oxidizer is 31%longer than that in ground state,and the filling time of fuel is 57%longer than that in ground state.展开更多
Synthesizing the mechanical models of the belt, the driver and the take-up device, the dynamics model was established on the longitudinal vibration of the overall belt conveyor system with finite elemental method, and...Synthesizing the mechanical models of the belt, the driver and the take-up device, the dynamics model was established on the longitudinal vibration of the overall belt conveyor system with finite elemental method, and S-function simulation block of asynchronous motor owing feedback function was built in Matlab/Simulink software, the simulation block indicates that motor rotation speed and its output moment vary with load and time, and the motor is a dynamic feedback system in working process. The state space block was adopted to express model of the belt. Thus it created simulation model of established dynamic model of overall belt conveyor system with Mat- lab/Simulink software, and simulates the course of starting by properly setting simulation parameters, and processes data for visualization.展开更多
To improve the start-up behavior of tokamak discharges and realize the low loop voltage start-up is required by performance of large scale, full superconductor tokamaks. In recent years, some kinds of RF wave have bee...To improve the start-up behavior of tokamak discharges and realize the low loop voltage start-up is required by performance of large scale, full superconductor tokamaks. In recent years, some kinds of RF wave have been used to assist the start-up and some exciting results have been gained. This paper introduce the investigation on both in physical principle and experimental research of the start-up process, in which high frequency RF waves were used to assist it.展开更多
Given the existing integrated scheduling algorithms,all processes are ordered and scheduled overall,and these algorithms ignore the influence of the vertical and horizontal characteristics of the product process tree ...Given the existing integrated scheduling algorithms,all processes are ordered and scheduled overall,and these algorithms ignore the influence of the vertical and horizontal characteristics of the product process tree on the product scheduling effect.This paper presents an integrated scheduling algorithm for the same equipment process sequencing based on the Root-Subtree horizontal and vertical pre-scheduling to solve the above problem.Firstly,the tree decomposition method is used to extract the root node to split the process tree into several Root-Subtrees,and the Root-Subtree priority is set from large to small through the optimal completion time of vertical and horizontal pre-scheduling.All Root-Subtree processes on the same equipment are sorted into the stack according to the equipment process pre-start time,and the stack-top processes are combined with the schedulable process set to schedule and dispatch the stack.The start processing time of each process is determined according to the dynamic start processing time strategy of the equipment process,to complete the fusion operation of the Root-Subtree processes under the constraints of the vertical process tree and the horizontal equipment.Then,the root node is retrieved to form a substantial scheduling scheme,which realizes scheduling optimization by mining the vertical and horizontal characteristics of the process tree.Verification by examples shows that,compared with the traditional integrated scheduling algorithms that sort the scheduling processes as an overall,the integrated scheduling algorithmin this paper is better.The proposed algorithmenhances the process scheduling compactness,reduces the length of the idle time of the processing equipment,and optimizes the production scheduling target,which is of universal significance to solve the integrated scheduling problem.展开更多
Based on the results of triaxial compressive creep tests for five kinds of rock under the different stress loading,unloading and cycle-loading-unloading conditions,the creep deformation is not only a function of stres...Based on the results of triaxial compressive creep tests for five kinds of rock under the different stress loading,unloading and cycle-loading-unloading conditions,the creep deformation is not only a function of stress and time,but also it has the corresponding relations to the triaxial stress-strain curves of rock.The deformation properties of soften-strain,harden-strain and ideal plasticity presented by conventional triaxial compressive test curves under the different stress states were utilized,and the creep characteristics,the creep starting stress and the different entire creep process curves of rock were studied systematically according to creep experiment results,and the relations of the triaxial stress-strain curves to the creeping starting stress,the terminating curve,the different creep processes,and the different creep fracture properties were established.The relations presented in this paper were verified partially by the creep experiment results of five types of rock.展开更多
基金the continued support of Key Laboratory of Inlet and Exhaust system Technology (Nanjing University of Aeronautics and Astronautics), ChinaMinistry of Education, National Science and Technology Major Project of China (Nos. 2017-V-0004-0054, 2019-II-0007-0027, Y2022II-0005-0008)+6 种基金Defense Industrial Technology Development Program of China (No. JCKY2019605D001)Advanced Jet Propulsion Creativity Center of AEAC of China (No. HKCX2020-02-011)China Postdoctoral Science Foundation (No. 2022M721598)Jiangsu Funding Program for Excellent Postdoctoral Talent of China (No. 2022ZB214)the Youth Fund Project of Natural Science Foundation of Jiangsu Province of China (No. BK20230891)the National Natural Science Foundation of China (No. 12332018)Science Center for Gas Turbine Project, China (P2022-B-I-006-001) and some other related foundations
文摘The Bypass Dual Throat Nozzle(BDTN)is a novel fluidic Thrust Vectoring(TV)nozzle,it switches to TV state by opening the valve in the bypass.To greatly manipulate the BDTN,the dynamic characteristics in the TV starting process should be analyzed.This paper conducts numerical simulations to grasp the variation processes of performances and the flow field evolution of BDTN and Dual Throat Nozzle(DTN).The dynamic responses of TV starting in typical DTN models are investigated at first.Then,the TV starting processes of BDTN in different Nozzle Pressure Ratio(NPR)conditions are simulated,and the valve opening durations(T)are also considered.Before the expected TV direction is achieved in the DTN,the jet is deflected to the opposite direction at the beginning of the dynamic process,which is called the reverse TV phenomenon.However,this phenomenon disappears in the BDTN.The larger injection width of DTN intensifies unsteady oscillations,and the reverse TV phenomenon is strengthened.In the BDTN,T determines the delay degree of performance variations compared to the static results,which is called hysteresis effect.At NPR=10,the hysteresis affects the final stable performance of BDTN.This study analyses the dynamic characteristics in DTN and BDTN,laying a foundation for further design of nozzles and control strategies.
文摘The start-up process of Stokes＇ second problem of a viscoelastic material with fractional element is studied. The fluid above an infinite flat plane is set in motion by a sudden acceleration of the plate to steady oscillation. Exact solutions are obtained by using Laplace transform and Fourier transform. It is found that the relationship between the first peak value and the one of equal-amplitude oscillations depends on the distance from the plate. The amplitude decreases for increasing frequency and increasing distance.
文摘A new dynamic non-equilibrium mixing-pool model for simulating start-up and dynamic re-sponse of a distillation column is reported.The proposed model is established on the basis ofconsidering the two dimensional flow/mixing behavior of actual trays in a distillation column.Com-parison is made among the computed results of the start-up time and the dynamic response time bythe proposed and five other typical models.It is found that the computed time for both dynamicprocesses is longer by the model which considers any flow/mixing pattern than by the model withoutsuch concern.The inertia effect of flow/mixing seems to be important and can not be ignored inmodeling the transient process of distillation.The proposed model,which is believed to be suitableto large column,seems somewhat useful in predicting industrial distillation dynamics.
文摘Liquid bipropellant attitude control rocket engines are widely used in satellites,manned spaceships,deep space probes and other spacecraft.The performance of an attitude control engine is directly related to the lifetime,control precision and safety of a spacecraft.The study of flow characteristics of an engine transient process is important to improve its performance.In this paper,the transient flow test of a transparent test piece was carried out during the starting process of the attitude control engine.Then the transient process of the test piece was simulated and compared with the test results to verify the rationality of the simulation model.Transient flow simulation was carried out for the starting process of the real engine injector.The results show that the filling of the outer ring of the oxidant circuit is slower than that of the central collecting cavity,and the filling of the second layer of the outer ring is slower than that of the first layer.The filling process in the fuel path starts from the cooling hole near the inlet side and the fuel flows out in the circumferential direction.Installation direction has little influence on engine starting flow process in the ground state.The filling time of the engine in its vacuum state is longer than that in the ground state,the filling time of oxidizer is 31%longer than that in ground state,and the filling time of fuel is 57%longer than that in ground state.
文摘Synthesizing the mechanical models of the belt, the driver and the take-up device, the dynamics model was established on the longitudinal vibration of the overall belt conveyor system with finite elemental method, and S-function simulation block of asynchronous motor owing feedback function was built in Matlab/Simulink software, the simulation block indicates that motor rotation speed and its output moment vary with load and time, and the motor is a dynamic feedback system in working process. The state space block was adopted to express model of the belt. Thus it created simulation model of established dynamic model of overall belt conveyor system with Mat- lab/Simulink software, and simulates the course of starting by properly setting simulation parameters, and processes data for visualization.
基金The project supported by the National Nature Science Fundamental of China (No. 19975048)
文摘To improve the start-up behavior of tokamak discharges and realize the low loop voltage start-up is required by performance of large scale, full superconductor tokamaks. In recent years, some kinds of RF wave have been used to assist the start-up and some exciting results have been gained. This paper introduce the investigation on both in physical principle and experimental research of the start-up process, in which high frequency RF waves were used to assist it.
基金supported by the National Natural Science Foundation of China[Grant No.61772160].
文摘Given the existing integrated scheduling algorithms,all processes are ordered and scheduled overall,and these algorithms ignore the influence of the vertical and horizontal characteristics of the product process tree on the product scheduling effect.This paper presents an integrated scheduling algorithm for the same equipment process sequencing based on the Root-Subtree horizontal and vertical pre-scheduling to solve the above problem.Firstly,the tree decomposition method is used to extract the root node to split the process tree into several Root-Subtrees,and the Root-Subtree priority is set from large to small through the optimal completion time of vertical and horizontal pre-scheduling.All Root-Subtree processes on the same equipment are sorted into the stack according to the equipment process pre-start time,and the stack-top processes are combined with the schedulable process set to schedule and dispatch the stack.The start processing time of each process is determined according to the dynamic start processing time strategy of the equipment process,to complete the fusion operation of the Root-Subtree processes under the constraints of the vertical process tree and the horizontal equipment.Then,the root node is retrieved to form a substantial scheduling scheme,which realizes scheduling optimization by mining the vertical and horizontal characteristics of the process tree.Verification by examples shows that,compared with the traditional integrated scheduling algorithms that sort the scheduling processes as an overall,the integrated scheduling algorithmin this paper is better.The proposed algorithmenhances the process scheduling compactness,reduces the length of the idle time of the processing equipment,and optimizes the production scheduling target,which is of universal significance to solve the integrated scheduling problem.
基金Project(50774090) supported by the National Natural Science Foundation of China
文摘Based on the results of triaxial compressive creep tests for five kinds of rock under the different stress loading,unloading and cycle-loading-unloading conditions,the creep deformation is not only a function of stress and time,but also it has the corresponding relations to the triaxial stress-strain curves of rock.The deformation properties of soften-strain,harden-strain and ideal plasticity presented by conventional triaxial compressive test curves under the different stress states were utilized,and the creep characteristics,the creep starting stress and the different entire creep process curves of rock were studied systematically according to creep experiment results,and the relations of the triaxial stress-strain curves to the creeping starting stress,the terminating curve,the different creep processes,and the different creep fracture properties were established.The relations presented in this paper were verified partially by the creep experiment results of five types of rock.
