A series of poly(ethylene oxide)(PEO) membranes with star-like structures for CO_2/H_2 separation were prepared by the photo-polymerization method. The structure of PEO membrane was characterized by Fourier transform ...A series of poly(ethylene oxide)(PEO) membranes with star-like structures for CO_2/H_2 separation were prepared by the photo-polymerization method. The structure of PEO membrane was characterized by Fourier transform infrared spectroscopy(FTIR). The thermal property and inter-segmental distance of polymer chain were investigated by differential scanning calorimetry and wide-angle X-ray diffraction, respectively. The density was determined by hydrostatic weighing method. The gas permeability, solubility and diffusivity of CO_2 and H_2 were investigated in the star-like PEO membranes. The relationship between gas permeation performances and physical properties was also discussed. The membrane exhibits outstanding CO_2 permeability(about 9.7×10^(-11) cm^3(STP) cm/cm^2/s/Pa) and CO_2/H_2 selectivity(about 11) compared with other membranes.展开更多
Lignin serves as one of the most important molecular fossils for tracing Terrestrial Organic Matters （TOMs） in marine environment. Extraction and derivatization of lignin oxidation products （LOPs） are crucial for ...Lignin serves as one of the most important molecular fossils for tracing Terrestrial Organic Matters （TOMs） in marine environment. Extraction and derivatization of lignin oxidation products （LOPs） are crucial for accurate quantification of lignin in marine sediment. Here we report a modification of the conventional alkaline cupric oxide （CuO） oxidation method, the modification consisting in a solid phase extraction （SPE） and a novel on-column derivatization being employed for better efficiency and reproducibility. In spiking blanks, recoveries with SPE for the LOPs are between 77.84% and 99.57% with relative standard deviations （RSDs） ranging from 0.57% to 8.04% （n=3）, while those with traditional liquid-liquid extraction （LLE） are from 44.52% to 86.16% With RSDs being from 0.53% to 13.14% （n=3）. Moreover, the reproducibility is greatly improved with SPE, with less solvent consumption and shorter processing time. The average efficiency of on-column derivatization for LOPs is 100.8%±0.68%, which is significantly higher than those of in-vial or in-syringe derivatization, thus resulting in still less consumption of derivatizing reagents.Lignin in the surface sediments sampled from the south of Yangtze River estuary, China, was determined with the established method. Recoveries of 72.66% to 85.99% with standard deviation less than 0.01mg/10g dry weight are obtained except for p-hydroxybenzaldehyde. The lignin content ∑8 （produced from 10g dry sediment） in the research area is between 0.231 and 0.587mg. S/V and C/V ratios （1.028 ± 0.433 and 0.192±0.066, respectively） indicate that the TOMs in this region are originated from a mixture of woody and nonwoody angiosperm plants; the high values or （Ad/Al）v suggest that the TOMs has been highly degraded.展开更多
Atomistic potentials for cupric element and cupric oxide are derived based on the analytical bond-order scheme that was presented by Brenner [Brenner D W, Erratum： Empirical potential for hydrocarbons for use in simu...Atomistic potentials for cupric element and cupric oxide are derived based on the analytical bond-order scheme that was presented by Brenner [Brenner D W, Erratum： Empirical potential for hydrocarbons for use in simulating the chemical vapor deposition of diamond films, Phys. Rev. B 1992, 46 1948]. In this paper, for the pure cupric element, the energy and structural parameters for several bulk phases as well as dimmer structure are well reproduced. The reference data are taken from our density functional theory calculations and the available experiments. The model potential also provides a good description of the bulk properties of various solid structures of cupric oxide compound structures, including cohesive energies, lattice parameters, and elastic constants.展开更多
Maintaining a residual disinfectant/oxidant(e.g., chlorine and chlorine dioxide), is a generally used strategy to control microbial contaminants and bacterial regrowth in distribution systems. Secondarily oxidant, suc...Maintaining a residual disinfectant/oxidant(e.g., chlorine and chlorine dioxide), is a generally used strategy to control microbial contaminants and bacterial regrowth in distribution systems. Secondarily oxidant, such as hypobromous acid(HOBr), can be formed during chlorination of bromide-containing waters. The decay of oxidants and formation of disinfection byproducts(DBPs) due to the interaction between oxidants and selected metal oxides were studied. Selected metal oxides generally enhanced the decay of these halogencontaining oxidants via three pathways:(1) catalytic disproportionation to yield an oxidized form of halogen(i.e., halate) and reduced form(halide for chlorine and bromine or chlorite for chlorine dioxide),(2) oxygen formation, and(3) oxidation of a metal in a reduced form(e.g., cuprous oxide) to a higher oxidation state. Cupric oxide(Cu O) and nickel oxide(Ni O)showed significantly strong abilities for the first pathway, and oxygen formation was a side reaction. Cuprous oxide can react with oxidants via the third pathway, while goethite was not involved in these reactions. The ability of Cu O on catalytic disproportionation of HOBr remained stable up to four cycles. In chlorination process, bromate formation tends to be important(exceeding 10 μg/L) when initial bromide concentration is above 400 μg/L in the presence of dissolved organic matter. Increasing initial bromide concentrations increased the formation of DBPs and calculated cytotoxicity, and the maximum was observed at p H8.6 during chlorination process. Therefore, the possible disinfectant loss and DBP formation should be carefully considered in drinking water distribution systems.展开更多
A wet catalytic oxidation at room temperature was investigated with solution containing ferric, ferrous and cupric ions for H2S removal. The experiments were carried out in a two step process, and the results obtained...A wet catalytic oxidation at room temperature was investigated with solution containing ferric, ferrous and cupric ions for H2S removal. The experiments were carried out in a two step process, and the results obtained show that the removal efficiency of H2S can always reach 100% in a 300 mm scrubbing column with four sieve plates, and the regeneration of ferric ions in 200 mm bubble column can match the consumed ferric species in absorption. Removal of H2S, production of elemental sulfur and regeneration of ferric, cupric ions can all be accomplished at the same time. No raw material is consumed except O2 in flue gas or air, the process has no secondary pollution and no problem of catalyst degradation and congestion.展开更多
Different from the classical configuration CuO/CeO2 catalyst,the inverse configuration CeO2 /CuO catalyst （atomic ratio of Ce/Cu=10/100） was prepared by impregnation method.Five calcination temperatures were selecte...Different from the classical configuration CuO/CeO2 catalyst,the inverse configuration CeO2 /CuO catalyst （atomic ratio of Ce/Cu=10/100） was prepared by impregnation method.Five calcination temperatures were selected to investigate the interaction between CeO2 and CuO support.It is found that as calcination temperature increased from 500 to 900 C,sintering of CeO2 particles on the support occurred together with the diffusion of a portion of Ce 4＋ ions into CuO crystals,forming solid solution.Formation of interface complex Ce-O-Cu was suggested by TPR measurements.The catalyst calcined at 700 C gives the highest activity for preferential oxidation of CO in excess H2 stream.展开更多
A novel technology of removing H2S with cupric chloride solution was developed in this paper. Cupric as the form of CuS deposition, the CuS produced was then oxidized by excessive cupric ion in another reactor meanwhi...A novel technology of removing H2S with cupric chloride solution was developed in this paper. Cupric as the form of CuS deposition, the CuS produced was then oxidized by excessive cupric ion in another reactor meanwhile cupric ion that has been consumed can be recovered by the oxidization of CuCl2- with oxygen in air,and the solution can be circulated. Moreover, the leaching kinetics of CuS by cupric ion was studied. The removal efficiency of H2S is close to 100%, and the required operating condition is mild. Compared with other wet oxidization methods, no raw material is consumed except O2 in air, the process has no secondary pollution and no problem of degradation and scale, and the absorbent is much stable and reliable.展开更多
A novel technology of removing H2S with cupric chloride solution was developed in this paper. Cupric as the form of CuS deposition, the CuS produced was then oxidized by excessive cupric ion in another reactor meanwhi...A novel technology of removing H2S with cupric chloride solution was developed in this paper. Cupric as the form of CuS deposition, the CuS produced was then oxidized by excessive cupric ion in another reactor meanwhile cupric ion that has been consumed can be recovered by the oxidization of CuCl?2 with oxygen in air, and the solution can be circulated. Moreover, the leaching kinetics of CuS by cupric ion was studied. The removal efficiency of H2S is close to 100%, and the required operating condition is mild. Compared with other wet oxidiza- tion methods, no raw material is consumed except O2 in air, the process has no secondary pollution and no problem of degradation and scale, and the absorbent is much stable and reliable.展开更多
Chemical warfare agents(CWAs)are extremely lethal substances used in warfare and terrorism,capable of causing permanent damage even in small doses,despite medical intervention.Therefore,detection,protection,and detoxi...Chemical warfare agents(CWAs)are extremely lethal substances used in warfare and terrorism,capable of causing permanent damage even in small doses,despite medical intervention.Therefore,detection,protection,and detoxification of CWAs are vital for the safety of first responders,military personnel,and civilians,driving significant research in this area.Herein,we designed and synthesized a poly(-diallyldimethylammonium chloride)(PDDA)mediated cupric oxide(CuO)functionalized activated carbon fabric(ACF),termed ACF@PDDA-CuO,as an adsorbent filter material for self-detoxifying chemical protective clothing.PDDA,a positively charged polyelectrolyte,effectively binds in-situ synthesized CuO to the negatively charged ACF surface,serving as a suitable binder.This study demonstrates the synergistic effects of PDDA-CuO functionalization on ACF,where PDDA treatment enhanced mechanical and comfort properties,and CuO crystal growth significantly improved detoxification efficacy against the CWA Nerve Agent Sarin.Comprehensive analyses,including FTIR,BET surface area analysis,SEM,EDS,TEM,STEM,TGA,XPS,and XRD,confirmed the uniform deposition of CuO and PDDA on the ACF surface.The Cu content on ACF@PDDA-CuO samples was measured via iodometric titration.The materials were evaluated for tensile strength,air permeability,water vapor permeability,nerve agent(Sarin)detoxification,and blister agent(Sulfur Mustard)breakthrough time to assess their applicability for protective clothing.The optimized PDDA-CuO on ACF detoxified 82.04%of Sarin within 18 h,compared to 25.22%by ACF alone,and enhanced tensile strength by 23.67%,air permeability by 24.63%,and water vapor permeability by 3.94%,while maintaining protection against Sulfur Mustard for 24 h.These findings indicate that ACF@PDDA-CuO is a promising candidate for CWA protective clothing,offering robust protection with enhanced comfort.展开更多
基金Funded by the National Natural Science Foundation of China(Nos.21776217,21506160)the Science and Technology Plans of Tianjin(Nos.17PTSYJC00050,18PTSYJC 00190)
文摘A series of poly(ethylene oxide)(PEO) membranes with star-like structures for CO_2/H_2 separation were prepared by the photo-polymerization method. The structure of PEO membrane was characterized by Fourier transform infrared spectroscopy(FTIR). The thermal property and inter-segmental distance of polymer chain were investigated by differential scanning calorimetry and wide-angle X-ray diffraction, respectively. The density was determined by hydrostatic weighing method. The gas permeability, solubility and diffusivity of CO_2 and H_2 were investigated in the star-like PEO membranes. The relationship between gas permeation performances and physical properties was also discussed. The membrane exhibits outstanding CO_2 permeability(about 9.7×10^(-11) cm^3(STP) cm/cm^2/s/Pa) and CO_2/H_2 selectivity(about 11) compared with other membranes.
基金supported by the National Basic Research Program of China (973 Program, Grant No. 2010CB428901)the National Natural Science Foundation of China (NSFC, Grant No. 41020164005,41276067)the team of 973 Program Grant No. 2010CB428701 for the help during sampling
文摘Lignin serves as one of the most important molecular fossils for tracing Terrestrial Organic Matters （TOMs） in marine environment. Extraction and derivatization of lignin oxidation products （LOPs） are crucial for accurate quantification of lignin in marine sediment. Here we report a modification of the conventional alkaline cupric oxide （CuO） oxidation method, the modification consisting in a solid phase extraction （SPE） and a novel on-column derivatization being employed for better efficiency and reproducibility. In spiking blanks, recoveries with SPE for the LOPs are between 77.84% and 99.57% with relative standard deviations （RSDs） ranging from 0.57% to 8.04% （n=3）, while those with traditional liquid-liquid extraction （LLE） are from 44.52% to 86.16% With RSDs being from 0.53% to 13.14% （n=3）. Moreover, the reproducibility is greatly improved with SPE, with less solvent consumption and shorter processing time. The average efficiency of on-column derivatization for LOPs is 100.8%±0.68%, which is significantly higher than those of in-vial or in-syringe derivatization, thus resulting in still less consumption of derivatizing reagents.Lignin in the surface sediments sampled from the south of Yangtze River estuary, China, was determined with the established method. Recoveries of 72.66% to 85.99% with standard deviation less than 0.01mg/10g dry weight are obtained except for p-hydroxybenzaldehyde. The lignin content ∑8 （produced from 10g dry sediment） in the research area is between 0.231 and 0.587mg. S/V and C/V ratios （1.028 ± 0.433 and 0.192±0.066, respectively） indicate that the TOMs in this region are originated from a mixture of woody and nonwoody angiosperm plants; the high values or （Ad/Al）v suggest that the TOMs has been highly degraded.
基金Project supported by the Doctoral Program of Higher Education of China(Grant No.20111415120002)the National Natural Science Foundation of China(Grant Nos.11204199,61178067,and 51135007)+1 种基金the Program for the Outstanding Innovative Teams of Higher Learning Institutions of Shanxi Province,Chinathe Youth Foundation of Taiyuan University of Science and Technology,China(Grant No.20113020)
文摘Atomistic potentials for cupric element and cupric oxide are derived based on the analytical bond-order scheme that was presented by Brenner [Brenner D W, Erratum： Empirical potential for hydrocarbons for use in simulating the chemical vapor deposition of diamond films, Phys. Rev. B 1992, 46 1948]. In this paper, for the pure cupric element, the energy and structural parameters for several bulk phases as well as dimmer structure are well reproduced. The reference data are taken from our density functional theory calculations and the available experiments. The model potential also provides a good description of the bulk properties of various solid structures of cupric oxide compound structures, including cohesive energies, lattice parameters, and elastic constants.
基金supported by the Key Laboratory of Drinking Water Science and Technology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences (Project No. 20Z01KLDWST)。
文摘Maintaining a residual disinfectant/oxidant(e.g., chlorine and chlorine dioxide), is a generally used strategy to control microbial contaminants and bacterial regrowth in distribution systems. Secondarily oxidant, such as hypobromous acid(HOBr), can be formed during chlorination of bromide-containing waters. The decay of oxidants and formation of disinfection byproducts(DBPs) due to the interaction between oxidants and selected metal oxides were studied. Selected metal oxides generally enhanced the decay of these halogencontaining oxidants via three pathways:(1) catalytic disproportionation to yield an oxidized form of halogen(i.e., halate) and reduced form(halide for chlorine and bromine or chlorite for chlorine dioxide),(2) oxygen formation, and(3) oxidation of a metal in a reduced form(e.g., cuprous oxide) to a higher oxidation state. Cupric oxide(Cu O) and nickel oxide(Ni O)showed significantly strong abilities for the first pathway, and oxygen formation was a side reaction. Cuprous oxide can react with oxidants via the third pathway, while goethite was not involved in these reactions. The ability of Cu O on catalytic disproportionation of HOBr remained stable up to four cycles. In chlorination process, bromate formation tends to be important(exceeding 10 μg/L) when initial bromide concentration is above 400 μg/L in the presence of dissolved organic matter. Increasing initial bromide concentrations increased the formation of DBPs and calculated cytotoxicity, and the maximum was observed at p H8.6 during chlorination process. Therefore, the possible disinfectant loss and DBP formation should be carefully considered in drinking water distribution systems.
文摘A wet catalytic oxidation at room temperature was investigated with solution containing ferric, ferrous and cupric ions for H2S removal. The experiments were carried out in a two step process, and the results obtained show that the removal efficiency of H2S can always reach 100% in a 300 mm scrubbing column with four sieve plates, and the regeneration of ferric ions in 200 mm bubble column can match the consumed ferric species in absorption. Removal of H2S, production of elemental sulfur and regeneration of ferric, cupric ions can all be accomplished at the same time. No raw material is consumed except O2 in flue gas or air, the process has no secondary pollution and no problem of catalyst degradation and congestion.
文摘Different from the classical configuration CuO/CeO2 catalyst,the inverse configuration CeO2 /CuO catalyst （atomic ratio of Ce/Cu=10/100） was prepared by impregnation method.Five calcination temperatures were selected to investigate the interaction between CeO2 and CuO support.It is found that as calcination temperature increased from 500 to 900 C,sintering of CeO2 particles on the support occurred together with the diffusion of a portion of Ce 4＋ ions into CuO crystals,forming solid solution.Formation of interface complex Ce-O-Cu was suggested by TPR measurements.The catalyst calcined at 700 C gives the highest activity for preferential oxidation of CO in excess H2 stream.
文摘A novel technology of removing H2S with cupric chloride solution was developed in this paper. Cupric as the form of CuS deposition, the CuS produced was then oxidized by excessive cupric ion in another reactor meanwhile cupric ion that has been consumed can be recovered by the oxidization of CuCl2- with oxygen in air,and the solution can be circulated. Moreover, the leaching kinetics of CuS by cupric ion was studied. The removal efficiency of H2S is close to 100%, and the required operating condition is mild. Compared with other wet oxidization methods, no raw material is consumed except O2 in air, the process has no secondary pollution and no problem of degradation and scale, and the absorbent is much stable and reliable.
文摘A novel technology of removing H2S with cupric chloride solution was developed in this paper. Cupric as the form of CuS deposition, the CuS produced was then oxidized by excessive cupric ion in another reactor meanwhile cupric ion that has been consumed can be recovered by the oxidization of CuCl?2 with oxygen in air, and the solution can be circulated. Moreover, the leaching kinetics of CuS by cupric ion was studied. The removal efficiency of H2S is close to 100%, and the required operating condition is mild. Compared with other wet oxidiza- tion methods, no raw material is consumed except O2 in air, the process has no secondary pollution and no problem of degradation and scale, and the absorbent is much stable and reliable.
基金Defence Research and Development Establishment(DRDE),DRDO,Gwalior-474002,(India)for his keen interestencouragement.The DRDE accession number for this manuscript is DRDE-IREC-130-28/03/2024.
文摘Chemical warfare agents(CWAs)are extremely lethal substances used in warfare and terrorism,capable of causing permanent damage even in small doses,despite medical intervention.Therefore,detection,protection,and detoxification of CWAs are vital for the safety of first responders,military personnel,and civilians,driving significant research in this area.Herein,we designed and synthesized a poly(-diallyldimethylammonium chloride)(PDDA)mediated cupric oxide(CuO)functionalized activated carbon fabric(ACF),termed ACF@PDDA-CuO,as an adsorbent filter material for self-detoxifying chemical protective clothing.PDDA,a positively charged polyelectrolyte,effectively binds in-situ synthesized CuO to the negatively charged ACF surface,serving as a suitable binder.This study demonstrates the synergistic effects of PDDA-CuO functionalization on ACF,where PDDA treatment enhanced mechanical and comfort properties,and CuO crystal growth significantly improved detoxification efficacy against the CWA Nerve Agent Sarin.Comprehensive analyses,including FTIR,BET surface area analysis,SEM,EDS,TEM,STEM,TGA,XPS,and XRD,confirmed the uniform deposition of CuO and PDDA on the ACF surface.The Cu content on ACF@PDDA-CuO samples was measured via iodometric titration.The materials were evaluated for tensile strength,air permeability,water vapor permeability,nerve agent(Sarin)detoxification,and blister agent(Sulfur Mustard)breakthrough time to assess their applicability for protective clothing.The optimized PDDA-CuO on ACF detoxified 82.04%of Sarin within 18 h,compared to 25.22%by ACF alone,and enhanced tensile strength by 23.67%,air permeability by 24.63%,and water vapor permeability by 3.94%,while maintaining protection against Sulfur Mustard for 24 h.These findings indicate that ACF@PDDA-CuO is a promising candidate for CWA protective clothing,offering robust protection with enhanced comfort.
