It is proposed that a capacitor can be connected permanently across each phase winding of a three-phase induction motor along with the conventional delta-star switching, for further saving in VARh at reduced loads on ...It is proposed that a capacitor can be connected permanently across each phase winding of a three-phase induction motor along with the conventional delta-star switching, for further saving in VARh at reduced loads on the motor. The method of choosing a suitable value for the capacitor and the criteria to be adopted for calculating the power output at which the star to delta switching is to be made are also explained. The phase, 4-pole, 415 V, 50 Hz, 3 experimental results on a 3- 3 kW induction motor verify the advantages in adding the capacitor to the phase winding of the motor. Compared to using only a single delta connected stator winding or a delta-star switching, the advantages of the proposed addition of a capacitor, are also demonstrated through a case study conducted on a 400 V, 250 kW motor. Any further improvement in grid side power factor can be achieved by employing a static synchronous compensator （STATCOM） of reduced VAR rating.展开更多
At present,the naked-eye three-dimensional(3D)display technology still has some drawbacks,such as low brightness uniformity,high crosstalk,low light efficiency,short viewing distance,and the manufacturing is difficult...At present,the naked-eye three-dimensional(3D)display technology still has some drawbacks,such as low brightness uniformity,high crosstalk,low light efficiency,short viewing distance,and the manufacturing is difficulty.Based on the principle of naked-eye 3D display and the Fresnel optical theory,this paper designs a Fresnel lens array and the star-shaped liquid crystal display(LCD)switch of unit LCD screen to achieve low-crosstalk and high brightness uniformity for the autostereoscopic 3D display.The unit parameters of a 139.7 cm 4K model autostereoscopic 3D displayer are provided and they are optimized by the TracePro software.The results show that when the pitch of the Fresnel lens on the exit surface is 0.304 mm,the width of each serration of Fresnel lens is 0.0234 mm,the length of the Fresnel lens is 2.87 mm,and the center height of star-shaped LCD switch is 0.030 mm,the center length is 0.040 mm,the width of star-shaped LCD switch is 0.050 mm,and the image crosstalk is less than 2%when the viewing distance is 2.50 m.The problem on the brightness of the image in different positions is improved.展开更多
文摘It is proposed that a capacitor can be connected permanently across each phase winding of a three-phase induction motor along with the conventional delta-star switching, for further saving in VARh at reduced loads on the motor. The method of choosing a suitable value for the capacitor and the criteria to be adopted for calculating the power output at which the star to delta switching is to be made are also explained. The phase, 4-pole, 415 V, 50 Hz, 3 experimental results on a 3- 3 kW induction motor verify the advantages in adding the capacitor to the phase winding of the motor. Compared to using only a single delta connected stator winding or a delta-star switching, the advantages of the proposed addition of a capacitor, are also demonstrated through a case study conducted on a 400 V, 250 kW motor. Any further improvement in grid side power factor can be achieved by employing a static synchronous compensator （STATCOM） of reduced VAR rating.
基金supported by the 2022 Fujian Provincial Young and Middle-aged Teacher Education and Research Project(Science and Technology)(No.JAT220468)the Xiamen Natural Science Foundation(No.3502Z20227334).
文摘At present,the naked-eye three-dimensional(3D)display technology still has some drawbacks,such as low brightness uniformity,high crosstalk,low light efficiency,short viewing distance,and the manufacturing is difficulty.Based on the principle of naked-eye 3D display and the Fresnel optical theory,this paper designs a Fresnel lens array and the star-shaped liquid crystal display(LCD)switch of unit LCD screen to achieve low-crosstalk and high brightness uniformity for the autostereoscopic 3D display.The unit parameters of a 139.7 cm 4K model autostereoscopic 3D displayer are provided and they are optimized by the TracePro software.The results show that when the pitch of the Fresnel lens on the exit surface is 0.304 mm,the width of each serration of Fresnel lens is 0.0234 mm,the length of the Fresnel lens is 2.87 mm,and the center height of star-shaped LCD switch is 0.030 mm,the center length is 0.040 mm,the width of star-shaped LCD switch is 0.050 mm,and the image crosstalk is less than 2%when the viewing distance is 2.50 m.The problem on the brightness of the image in different positions is improved.
