The structures in engineering can be simplified into elastic beams with concentrated masses and elastic spring supports. Studying the law of vibration of the beams can be a help in guiding its design and avoiding reso...The structures in engineering can be simplified into elastic beams with concentrated masses and elastic spring supports. Studying the law of vibration of the beams can be a help in guiding its design and avoiding resonance. Based on the Laplace transform method, the mode shape functions and the frequency equations of the beams in the typical boundary conditions are derived. A cantilever beam with a lumped mass and a spring is selected to obtain its natural frequencies and mode shape functions. An experiment was conducted in order to get the modal parameters of the beam based on the NExT-ERA method. By comparing the analytical and experimental results, the effects of the locations of the mass and spring on the modal parameter are discussed. The variation of the natural frequencies was obtained with the changing stiffness coefficient and mass coefficient, respectively. The findings provide a reference for the vibration analysis methods and the lumped parameters layout design of elastic beams used in engineering.展开更多
Free vibrations of a beam-mass-spring system with different boundary conditions are analyzed both analyt- ically and numerically. In the analytical analysis, the system is divided into three subsystems and the effects...Free vibrations of a beam-mass-spring system with different boundary conditions are analyzed both analyt- ically and numerically. In the analytical analysis, the system is divided into three subsystems and the effects of the spring and the point mass are considered as internal boundary con- ditions between any two neighboring subsystems. The par- tial differential equations governing the motion of the sub- systems and internal boundary conditions are then solved us- ing the method of separation of variables. In the numerical analysis, the whole system is considered as a single system and the effects of the spring and point mass are introduced using the Dirac delta function. The Galerkin method is then employed to discretize the equation of motion and the result- ing set of ordinary differential equations are solved via eigen- value analysis. Analytical and numerical results are shown to be in very good agreement.展开更多
Recently novel mechanisms with compact size and without many mechanical elements such as bearing are strongly required for medical devices such as surgical operation devices. This paper describes analysis and synthesi...Recently novel mechanisms with compact size and without many mechanical elements such as bearing are strongly required for medical devices such as surgical operation devices. This paper describes analysis and synthesis of elastic link mechanisms of a single spring beam which can be manufactured by NC coiling machines. These mechanisms are expected as disposable micro forceps. Smooth Curvature Model（SCM） with 3rd order Legendre polynomial curvature functions is applied to calculate large deformation of a curved cantilever beam by taking account of the balance between external and internal elastic forces and moments. SCM is then extended to analyze large deformation of a closed-loop curved elastic beam which is composed of multiple free curved beams. A closed-loop elastic link is divided into two free curved cantilever beams each of which is assumed as serially connected free curved cantilever beams described with SCM. The sets of coefficients of Legendre polynomials of SCM in all free curved cantilever beams are determined by taking account of the force and moment balance at connecting point where external input force is applied. The sets of coefficients of Legendre polynomials of a nonleaded closed-loop elastic link are optimized to design a link mechanism which can generate specified output motion due to input force applied at the assumed dividing point. For example, two planar micro grippers with a single pulling input force are analyzed and designed. The elastic deformation analyzed with proposed method agrees very well with that calculated with FEM. The designed micro gripper can generate the desired pinching motion. The proposed method can contribute to design compact and simple elastic mechanisms without high calculation costs.展开更多
In this paper a method based on a line-spring model was proposed to analyze approximately vibration responses of cracked beams. The method is conjunction with the Euler-Bernoulli beam theory, modal analysis and fractu...In this paper a method based on a line-spring model was proposed to analyze approximately vibration responses of cracked beams. The method is conjunction with the Euler-Bernoulli beam theory, modal analysis and fracture mechanics principle was applied to derive a characteristic equation for the cracked beam vibration. As application examples, natural frequency responses for a cracked hinged-hinged beam and a cracked cantilever beam were examined. It was shown that the present solutions obtained are quite in agreement with the solutions or experimental results in available references.展开更多
A new method based on a modified line-spring model is developed for evaluating the natural frequencies of vibration of a cracked beam.This model in conjunction with the Euler-Bernoulli beam theory,modal analysis and l...A new method based on a modified line-spring model is developed for evaluating the natural frequencies of vibration of a cracked beam.This model in conjunction with the Euler-Bernoulli beam theory,modal analysis and linear elastic fracture mechanics is applied to obtain an approximate characteristic equation of a cracked hinged-hinged beam.By solving this equation the natural frequencies are determined for different crack lengths in different positions.The results show good agreement with the solutions through finite element analysis.The present method may be extended to analyze other cracked complicated structures with various boundary conditions.展开更多
基金Supported by the National Natural Science Foundation of China(51109034)
文摘The structures in engineering can be simplified into elastic beams with concentrated masses and elastic spring supports. Studying the law of vibration of the beams can be a help in guiding its design and avoiding resonance. Based on the Laplace transform method, the mode shape functions and the frequency equations of the beams in the typical boundary conditions are derived. A cantilever beam with a lumped mass and a spring is selected to obtain its natural frequencies and mode shape functions. An experiment was conducted in order to get the modal parameters of the beam based on the NExT-ERA method. By comparing the analytical and experimental results, the effects of the locations of the mass and spring on the modal parameter are discussed. The variation of the natural frequencies was obtained with the changing stiffness coefficient and mass coefficient, respectively. The findings provide a reference for the vibration analysis methods and the lumped parameters layout design of elastic beams used in engineering.
文摘Free vibrations of a beam-mass-spring system with different boundary conditions are analyzed both analyt- ically and numerically. In the analytical analysis, the system is divided into three subsystems and the effects of the spring and the point mass are considered as internal boundary con- ditions between any two neighboring subsystems. The par- tial differential equations governing the motion of the sub- systems and internal boundary conditions are then solved us- ing the method of separation of variables. In the numerical analysis, the whole system is considered as a single system and the effects of the spring and point mass are introduced using the Dirac delta function. The Galerkin method is then employed to discretize the equation of motion and the result- ing set of ordinary differential equations are solved via eigen- value analysis. Analytical and numerical results are shown to be in very good agreement.
文摘Recently novel mechanisms with compact size and without many mechanical elements such as bearing are strongly required for medical devices such as surgical operation devices. This paper describes analysis and synthesis of elastic link mechanisms of a single spring beam which can be manufactured by NC coiling machines. These mechanisms are expected as disposable micro forceps. Smooth Curvature Model（SCM） with 3rd order Legendre polynomial curvature functions is applied to calculate large deformation of a curved cantilever beam by taking account of the balance between external and internal elastic forces and moments. SCM is then extended to analyze large deformation of a closed-loop curved elastic beam which is composed of multiple free curved beams. A closed-loop elastic link is divided into two free curved cantilever beams each of which is assumed as serially connected free curved cantilever beams described with SCM. The sets of coefficients of Legendre polynomials of SCM in all free curved cantilever beams are determined by taking account of the force and moment balance at connecting point where external input force is applied. The sets of coefficients of Legendre polynomials of a nonleaded closed-loop elastic link are optimized to design a link mechanism which can generate specified output motion due to input force applied at the assumed dividing point. For example, two planar micro grippers with a single pulling input force are analyzed and designed. The elastic deformation analyzed with proposed method agrees very well with that calculated with FEM. The designed micro gripper can generate the desired pinching motion. The proposed method can contribute to design compact and simple elastic mechanisms without high calculation costs.
文摘In this paper a method based on a line-spring model was proposed to analyze approximately vibration responses of cracked beams. The method is conjunction with the Euler-Bernoulli beam theory, modal analysis and fracture mechanics principle was applied to derive a characteristic equation for the cracked beam vibration. As application examples, natural frequency responses for a cracked hinged-hinged beam and a cracked cantilever beam were examined. It was shown that the present solutions obtained are quite in agreement with the solutions or experimental results in available references.
文摘A new method based on a modified line-spring model is developed for evaluating the natural frequencies of vibration of a cracked beam.This model in conjunction with the Euler-Bernoulli beam theory,modal analysis and linear elastic fracture mechanics is applied to obtain an approximate characteristic equation of a cracked hinged-hinged beam.By solving this equation the natural frequencies are determined for different crack lengths in different positions.The results show good agreement with the solutions through finite element analysis.The present method may be extended to analyze other cracked complicated structures with various boundary conditions.
