Orthogonal variable spreading factor channelization codes are widely used to provide variable data rates for supporting different bandwidth requirements in wideband code division multiple access (WCDMA) systems. A new...Orthogonal variable spreading factor channelization codes are widely used to provide variable data rates for supporting different bandwidth requirements in wideband code division multiple access (WCDMA) systems. A new code match scheme for WCDMA code tree management was proposed. The code match scheme is similar to the existing crowed-first scheme. When choosing a code for a user, the code match scheme only compares the one up layer of the allocated codes, unlike the crowed-first scheme which perhaps compares all up layers. So the operation of code match scheme is simple, and the average time delay is decreased by 5.1%. The simulation results also show that the code match strategy can decrease the average code blocking probability by 8.4%.展开更多
The investigation of Sm-Ce doping on structure,conduction,and dielectric response of Bi_(2)Ca_(2-2x)Sm_(x)CexCoO_(6)(x=0.000,0.025,0.050,0.075)(BCSCCO)are presented.All the specimens were synthesized by a facile synth...The investigation of Sm-Ce doping on structure,conduction,and dielectric response of Bi_(2)Ca_(2-2x)Sm_(x)CexCoO_(6)(x=0.000,0.025,0.050,0.075)(BCSCCO)are presented.All the specimens were synthesized by a facile synthesis technique named the co-precipitation route.X-ray diffraction(XRD)reveals that BCSCCO crystallizes into one phase with space group P21/m.The crystallite size,dislocation density,lattice parameters,lattice strain,unit cell volume,and bulk density were determined using XRD data.The structural properties of Bi_(2)Ca_(2)CoO_(6)were examined using calculations based on the density functional theory.Theoretical and experimental values discrepancy is less than 1%.A scanning electron microscope was used for performing a microstructural analysis.The SEM images demonstrate the homogeneous distribution of grains with a range of sizes(0.054-0.090μm).The alternating current(ac)conductivity,dielectric permittivity,and tangent loss were also studied as a function of frequency(20 Hz-3 MHz)at different temperatures(100-500℃).All synthesized samples were examined using non-linear Debye's function to determine their spreading factor and relaxation time.The specimen with the lowest crystallite size(∼23 nm)exhibits a high dielectric permittivity(∼3.80×10^(6)).The conduction mechanism was examined in the studied samples with the use of Jonscher's power law.The power law indicates that the BCSCCO(x=0.000,0.025)follows correlated barrier hopping,whereas the x=0.050 and 0.075 compositions follow non-overlapping polaron tunneling.The studied specimen Bi_(2)Ca_(1.9)0Sm_(0.05)0Ce_(0.05)_(0)CoO_(6)with the highest density(∼5.65 g/cm^(3))displays a high electrical conductivity(∼46.1 S/cm).These findings correspond to those published for ceramics made from calcium cobaltite using solid-state reactions(5.0-26.0 S/cm).展开更多
A droplet undergoes spreading,rebounding or splashing when it impacts solid boundary,which is a typical phenomenon of free surface flow that exists widely in modern industry.Smoothed particle hydrodynamics(SPH)method ...A droplet undergoes spreading,rebounding or splashing when it impacts solid boundary,which is a typical phenomenon of free surface flow that exists widely in modern industry.Smoothed particle hydrodynamics(SPH)method is applied to numerically study the dynamical behaviors of the droplet impacting solid boundary,and both the spreading and rebounding phenomena of the droplet are reproduced in the simulation.The droplet deformation,flow fields and pressure fields inside the droplet at different moments are analyzed.Two important factors,the initial velocity and diameter,are discussed in determining the maximum spreading factor,revealing that the maximum spreading factor increases with the increase of the impact velocity and droplet diameter respectively.展开更多
<strong>Objective:</strong> For materials science and generally, for long-term operation of work-pieces in industry the significant role is attributed to dependence of macro-mechanical properties of consol...<strong>Objective:</strong> For materials science and generally, for long-term operation of work-pieces in industry the significant role is attributed to dependence of macro-mechanical properties of consolidated body on crystalline phase composition, its dimensions, form, distribution in matrix and the form factor. While working in responsible fields of technology of ceramics and ceramic composites the above referred properties are attributed extremely great role with the view of durability and endurance at the terms of heavy mechanical loads. For description of the resistance of any concrete type work-piece, the crystalline phase plays the greatest role in mechanical strength or deformation of any material. It plays the important role in correlative explanation of materials mechanics and matrix properties. In our case, in the process of destruction of ceramic materials and composites, which will give us exhaustive response to the role of macro- and micro-mechanical properties of materials, the role of a macro- and micro-structural component, that is, of crystalline phase in the process of transition of stable state of materials into meta-stable state is extremely big. Our study aims to develop a formula of dependence of macro-mechanical properties of ceramic and ceramic composites on crystalline phase, the most powerful component of their structure, which will enable theorists and practitioners to select and develop technologies and technological processes correctly. <strong>Method:</strong> On the basis of the study of micro- and macro-mechanical properties of ceramics and ceramic composites and the morphology of crystalline phase and the analysis of the study we determined and created parameters of the formula. <strong>Results:</strong> The formula covers macro-mechanical properties, that is when the work-piece is thoroughly destructed: mechanic at bending at three and four-point load, mechanic at contraction;among morphological characteristics: composition of crystalline phase and their spreading in matrix, their sizes, form factor;correlative dependence of the above listed properties. Absolutely new definition of a factor of spreading of crystalline phase in matrix is offered. <strong>Conclusion: </strong>The created formula is of consolidated nature and it can be used in technology of any ceramic material and ceramic composites. The formula will help practitioners to plan correctly and fulfill accurately all positions of technology of production of work-pieces, to carry out the most responsible thermal treatment process of technology of manufacture of work-pieces;to determine correlation between mechanical and matrix properties of materials.展开更多
In this paper, an improved hybrid space vector pulse width modulation (HSVPWM) technique is proposed for IM (induction motor) drives. The basic principle involved in the proposed random pulse width modulation (RPWM) c...In this paper, an improved hybrid space vector pulse width modulation (HSVPWM) technique is proposed for IM (induction motor) drives. The basic principle involved in the proposed random pulse width modulation (RPWM) cuddled SVPWM is amalgamating the pre-calculated switching timings for various sections of hexagonal space vector boundary and the random selection of carrier between two triangular signals, in order to disband acoustic switching noise spectrum with improved fundamental component. The arbitrary selection between triangular carriers, which is decided by digital signal states (Low or High) of the linear feedback shift register (LFSR) based pseudo random binary sequence (PRBS) generator. The SVPWM offers a control degree of freedom in terms of positioning of vectors inside every sampling interval and hence it has six possible variants of the voltage vectors arrangements in each sector. The developed HSVPWM is thoroughly analyzed in using the MATLAB? based simulation for all SVPWM variants. From the simulation and experimental results viz. harmonic spectrum, harmonic spread factor (HSF), total harmonic distortion (THD) etc., and the superiority of the proposed scheme such as better utilization of DC bus and the randomization of the harmonic power are evidenced. For the practical implementation, Xilinx XC3S500E FPGA device has been used.展开更多
A two-dimensional lattice Boltzmann model has been employed to simulate the impingement of a liquid drop on a dry surface.For a range of Weber number,Reynolds number and low density ratios,multiple phases leading to b...A two-dimensional lattice Boltzmann model has been employed to simulate the impingement of a liquid drop on a dry surface.For a range of Weber number,Reynolds number and low density ratios,multiple phases leading to breakup have been obtained.An analytical solution for breakup as function of Reynolds and Weber number based on the conservation of energy is shown to match well with the simulations.At the moment breakup occurs,the spread diameter is maximum;it increases with Weber number and reaches an asymptotic value at a density ratio of 10.Droplet breakup is found to be more viable for the case when the wall is non-wetting or neutral as compared to a wetting surface.Upon breakup,the distance between the daughter droplets is much higher for the case with a non-wetting wall,which illustrates the role of the surface interactions in the outcome of the impact.展开更多
基金Project(60202005) supported by the National Natural Science Foundation of China
文摘Orthogonal variable spreading factor channelization codes are widely used to provide variable data rates for supporting different bandwidth requirements in wideband code division multiple access (WCDMA) systems. A new code match scheme for WCDMA code tree management was proposed. The code match scheme is similar to the existing crowed-first scheme. When choosing a code for a user, the code match scheme only compares the one up layer of the allocated codes, unlike the crowed-first scheme which perhaps compares all up layers. So the operation of code match scheme is simple, and the average time delay is decreased by 5.1%. The simulation results also show that the code match strategy can decrease the average code blocking probability by 8.4%.
基金Project supported by the NRPU-Higher Education Commission,Pakistan。
文摘The investigation of Sm-Ce doping on structure,conduction,and dielectric response of Bi_(2)Ca_(2-2x)Sm_(x)CexCoO_(6)(x=0.000,0.025,0.050,0.075)(BCSCCO)are presented.All the specimens were synthesized by a facile synthesis technique named the co-precipitation route.X-ray diffraction(XRD)reveals that BCSCCO crystallizes into one phase with space group P21/m.The crystallite size,dislocation density,lattice parameters,lattice strain,unit cell volume,and bulk density were determined using XRD data.The structural properties of Bi_(2)Ca_(2)CoO_(6)were examined using calculations based on the density functional theory.Theoretical and experimental values discrepancy is less than 1%.A scanning electron microscope was used for performing a microstructural analysis.The SEM images demonstrate the homogeneous distribution of grains with a range of sizes(0.054-0.090μm).The alternating current(ac)conductivity,dielectric permittivity,and tangent loss were also studied as a function of frequency(20 Hz-3 MHz)at different temperatures(100-500℃).All synthesized samples were examined using non-linear Debye's function to determine their spreading factor and relaxation time.The specimen with the lowest crystallite size(∼23 nm)exhibits a high dielectric permittivity(∼3.80×10^(6)).The conduction mechanism was examined in the studied samples with the use of Jonscher's power law.The power law indicates that the BCSCCO(x=0.000,0.025)follows correlated barrier hopping,whereas the x=0.050 and 0.075 compositions follow non-overlapping polaron tunneling.The studied specimen Bi_(2)Ca_(1.9)0Sm_(0.05)0Ce_(0.05)_(0)CoO_(6)with the highest density(∼5.65 g/cm^(3))displays a high electrical conductivity(∼46.1 S/cm).These findings correspond to those published for ceramics made from calcium cobaltite using solid-state reactions(5.0-26.0 S/cm).
基金Supported by the National Natural Science Foundation of China(No.51079095)the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(No.51021004)
文摘A droplet undergoes spreading,rebounding or splashing when it impacts solid boundary,which is a typical phenomenon of free surface flow that exists widely in modern industry.Smoothed particle hydrodynamics(SPH)method is applied to numerically study the dynamical behaviors of the droplet impacting solid boundary,and both the spreading and rebounding phenomena of the droplet are reproduced in the simulation.The droplet deformation,flow fields and pressure fields inside the droplet at different moments are analyzed.Two important factors,the initial velocity and diameter,are discussed in determining the maximum spreading factor,revealing that the maximum spreading factor increases with the increase of the impact velocity and droplet diameter respectively.
文摘<strong>Objective:</strong> For materials science and generally, for long-term operation of work-pieces in industry the significant role is attributed to dependence of macro-mechanical properties of consolidated body on crystalline phase composition, its dimensions, form, distribution in matrix and the form factor. While working in responsible fields of technology of ceramics and ceramic composites the above referred properties are attributed extremely great role with the view of durability and endurance at the terms of heavy mechanical loads. For description of the resistance of any concrete type work-piece, the crystalline phase plays the greatest role in mechanical strength or deformation of any material. It plays the important role in correlative explanation of materials mechanics and matrix properties. In our case, in the process of destruction of ceramic materials and composites, which will give us exhaustive response to the role of macro- and micro-mechanical properties of materials, the role of a macro- and micro-structural component, that is, of crystalline phase in the process of transition of stable state of materials into meta-stable state is extremely big. Our study aims to develop a formula of dependence of macro-mechanical properties of ceramic and ceramic composites on crystalline phase, the most powerful component of their structure, which will enable theorists and practitioners to select and develop technologies and technological processes correctly. <strong>Method:</strong> On the basis of the study of micro- and macro-mechanical properties of ceramics and ceramic composites and the morphology of crystalline phase and the analysis of the study we determined and created parameters of the formula. <strong>Results:</strong> The formula covers macro-mechanical properties, that is when the work-piece is thoroughly destructed: mechanic at bending at three and four-point load, mechanic at contraction;among morphological characteristics: composition of crystalline phase and their spreading in matrix, their sizes, form factor;correlative dependence of the above listed properties. Absolutely new definition of a factor of spreading of crystalline phase in matrix is offered. <strong>Conclusion: </strong>The created formula is of consolidated nature and it can be used in technology of any ceramic material and ceramic composites. The formula will help practitioners to plan correctly and fulfill accurately all positions of technology of production of work-pieces, to carry out the most responsible thermal treatment process of technology of manufacture of work-pieces;to determine correlation between mechanical and matrix properties of materials.
文摘In this paper, an improved hybrid space vector pulse width modulation (HSVPWM) technique is proposed for IM (induction motor) drives. The basic principle involved in the proposed random pulse width modulation (RPWM) cuddled SVPWM is amalgamating the pre-calculated switching timings for various sections of hexagonal space vector boundary and the random selection of carrier between two triangular signals, in order to disband acoustic switching noise spectrum with improved fundamental component. The arbitrary selection between triangular carriers, which is decided by digital signal states (Low or High) of the linear feedback shift register (LFSR) based pseudo random binary sequence (PRBS) generator. The SVPWM offers a control degree of freedom in terms of positioning of vectors inside every sampling interval and hence it has six possible variants of the voltage vectors arrangements in each sector. The developed HSVPWM is thoroughly analyzed in using the MATLAB? based simulation for all SVPWM variants. From the simulation and experimental results viz. harmonic spectrum, harmonic spread factor (HSF), total harmonic distortion (THD) etc., and the superiority of the proposed scheme such as better utilization of DC bus and the randomization of the harmonic power are evidenced. For the practical implementation, Xilinx XC3S500E FPGA device has been used.
文摘A two-dimensional lattice Boltzmann model has been employed to simulate the impingement of a liquid drop on a dry surface.For a range of Weber number,Reynolds number and low density ratios,multiple phases leading to breakup have been obtained.An analytical solution for breakup as function of Reynolds and Weber number based on the conservation of energy is shown to match well with the simulations.At the moment breakup occurs,the spread diameter is maximum;it increases with Weber number and reaches an asymptotic value at a density ratio of 10.Droplet breakup is found to be more viable for the case when the wall is non-wetting or neutral as compared to a wetting surface.Upon breakup,the distance between the daughter droplets is much higher for the case with a non-wetting wall,which illustrates the role of the surface interactions in the outcome of the impact.
