A discrete element method （DEM） called particle flow code （PFC2D） was used to construct a model for Brazilian disc splitting test in the present study. Based on the experimental results of intact Brazilian disc of...A discrete element method （DEM） called particle flow code （PFC2D） was used to construct a model for Brazilian disc splitting test in the present study. Based on the experimental results of intact Brazilian disc of rock-like material, a set of micro-parameters in PFC2D that reflected the macro-mechanical behavior of rock-like materials were obtained. And then PFC2D was used to simulate Brazilian splitting test for jointed rock mass specimens and specimen containing a central straight notch. The effect of joint angle and notch angle on the tensile strength and failure mode of jointed rock specimens was detailed analyzed. In order to reveal the meso-mechanical mechanism of crack coalescence, displacement trend lines were applied to analyze the displacement evolution during the crack initiation and propagation. The investigated conclusions can be described as follows. （1） The tensile strength of jointed rock mass disc specimen is dependent to the joint angle. As the joint angle increases, the tensile strength of jointed rock specimen takes on a nonlinear variance. （2） The tensile strength of jointed rock mass disc specimen containing a central straight notch distributes as a function of both joint angle and notch angle. （3） Three major failure modes, i.e., pure tensile failure, shear failure and mixed tension and shear failure mode are observed in jointed rock mass disc specimens under Brazilian test. （4） The notch angle roles on crack initiation and and joint angle play important propagation characteristics of jointed rock mass disc specimen containing a central straight notch under Brazilian test.展开更多
The current technical standards primarily relied on experience to judge the interfacial bonding properties between the self-compacting concrete filling layer and the steam-cured concrete precast slab in CRTS Ⅲ slab b...The current technical standards primarily relied on experience to judge the interfacial bonding properties between the self-compacting concrete filling layer and the steam-cured concrete precast slab in CRTS Ⅲ slab ballastless track structure.This study sought to enhance technical standards for evaluating interfacial bonding properties by suggesting the use of the splitting tensile strength to evaluate the impact of bubble defects.Specimens were fabricated through on-site experiment.The percent of each area of 6 cm^(2)or more bubble defect was 0 in most of specimens.When the cumulative area of all bub-ble defects reached 12%,the splitting tensile strength value was 0.67 MPa,which exceeded the minimum required value of 0.5 MPa for ensuring bonding interface adhesion.Furthermore,when the cumulative area of all bubble defects reached 8%,the splitting tensile strength value was 0.85 MPa,which exceeded the minimum required value of 0.8 MPa,thereby over-coming the negative impact of each area of 10 cm^(2) or more bubble defect.Additionally,keeping the cumulative area of each area of 6 cm^(2) or more bubble defect below 6%ensured adequate bonding strength and reduced the occurrence of specimens with lower splitting tensile strength values.展开更多
In this work, compressive, flexural and split tensile strength together with coefficient of water absorption of high performance self-compacting concrete containing different amount of Fe2Os nanoparticles have been in...In this work, compressive, flexural and split tensile strength together with coefficient of water absorption of high performance self-compacting concrete containing different amount of Fe2Os nanoparticles have been investigated. The strength and the water permeability of the specimens have been improved by adding Fe2Os nanoparticles in the cement paste up to 4.0 wt%. Fe203 nanoparticle as a foreign nucleation site could accelerate C-S-H gel formation as a result of increased crystalline Ca（OH）2 amount especially at the early age of hydration and hence increase the strength of the specimens. In addition, Fe203 nanoparticles are able to act as nanofillers and recover the pore structure of the specimens by decreasing harmful pores to improve the water permeability. Several empirical relations have been presented to predict the flexural and the split tensile strength of the specimens by means of the corresponding compressive strength at a certain age of curing. Accelerated peak appearance in conduction calorimetry tests, more weight loss in thermogravimetric analysis and more rapid appearance of peaks related to hydrated products in X-ray diffraction results indicate that Fe203 nanoparticles up to 4 wt% could improve the mechanical and the physical properties of the specimens.展开更多
Tests were carried out to study the strength deterioration of concrete cooled in air or by water after sub-high temperature at different level and varying with cycles. It is proved that the cross-shaped cracks turned ...Tests were carried out to study the strength deterioration of concrete cooled in air or by water after sub-high temperature at different level and varying with cycles. It is proved that the cross-shaped cracks turned up and extended little by little on the surface of specimen subjected to repeat sub-high temperature, the splitting failure is characterized by cross-shaped cracks after 30 cycles, the concrete strengths decrease rapidly at early stage and to be steady subsequently with the increase of the temperature cycles, the splitting-tensile strength is more sensitive to temperature cycles than the compressive strength, the decline of concrete strength is mainly controlled by the maximum temperature having reached, the ultrasonic velocity in concrete is also declined. On the basis of test results, the mechanisms of sub-high temperature to the strength deterioration of concrete are analyzed.The formulas for calculating the compressive and splitting-tensile strength of concrete relating to the variation of temperature are proposed.展开更多
In the present paper, two models based on artificial neural networks and genetic programming for predicting split tensile strength and percentage of water absorption of concretes containing ZrO2 nanoparticles have bee...In the present paper, two models based on artificial neural networks and genetic programming for predicting split tensile strength and percentage of water absorption of concretes containing ZrO2 nanoparticles have been developed at different ages of curing. For building these models, training and testing using experimental results for 144 specimens produced with 16 different mixture proportions were conducted. The data used in the multilayer feed forward neural networks models and input variables of genetic programming models were arranged in a format of eight input parameters that cover the cement content, nanoparticle content, aggregate type, water content, the amount of superplasticizer, the type of curing medium, age of curing and number of testing try. According to these input parameters, in the neural networks and genetic programming models, the split tensile strength and percentage of water absorption values of concretes containing ZrO2 nanoparticles were predicted. The training and testing results in the neural network and genetic programming models have shown that two models have strong potential for predicting the split tensile strength and percentage of water absorption values of concretes containing ZrO2 nanoparticles. It has been found that neural network （NN） and gene expression programming （GEP） models will be valid within the ranges of variables. In neural networks model, as the training and testing ended when minimum error norm of network gained, the best results were obtained and in genetic programming model, when 4 genes were selected to construct the model, the best results were acquired. Although neural network have predicted better results, genetic programming is able to predict reasonable values with a simpler method rather than neural network.展开更多
Through adding different additional water use,the compressive strength,splitting tensile strength and fluidity of recycled concrete of three aggregate combination forms were studied by experiment respectively.The expe...Through adding different additional water use,the compressive strength,splitting tensile strength and fluidity of recycled concrete of three aggregate combination forms were studied by experiment respectively.The experimental results show that with the increase of adding additional water use,the compressive strength and splitting tensile strength of recycled coarse aggregate concrete decrease,but that of recycled fine aggregate concrete and recycled all aggregate concrete increase firstly then decrease.When additional water use is added more 15% or 20% than that of basic ordinary concrete,the recycled coarse aggregate concrete and fine one can get pretty good fluidity.When it is added more 30%,the recycled all aggregate concrete has fluidity that is just satisfied.展开更多
基金supported by the National Basic Research Programof China(2014CB046905)the Fundamental Research Funds for the Central Universities(China University of Mining and Technology)(2014YC10)
文摘A discrete element method （DEM） called particle flow code （PFC2D） was used to construct a model for Brazilian disc splitting test in the present study. Based on the experimental results of intact Brazilian disc of rock-like material, a set of micro-parameters in PFC2D that reflected the macro-mechanical behavior of rock-like materials were obtained. And then PFC2D was used to simulate Brazilian splitting test for jointed rock mass specimens and specimen containing a central straight notch. The effect of joint angle and notch angle on the tensile strength and failure mode of jointed rock specimens was detailed analyzed. In order to reveal the meso-mechanical mechanism of crack coalescence, displacement trend lines were applied to analyze the displacement evolution during the crack initiation and propagation. The investigated conclusions can be described as follows. （1） The tensile strength of jointed rock mass disc specimen is dependent to the joint angle. As the joint angle increases, the tensile strength of jointed rock specimen takes on a nonlinear variance. （2） The tensile strength of jointed rock mass disc specimen containing a central straight notch distributes as a function of both joint angle and notch angle. （3） Three major failure modes, i.e., pure tensile failure, shear failure and mixed tension and shear failure mode are observed in jointed rock mass disc specimens under Brazilian test. （4） The notch angle roles on crack initiation and and joint angle play important propagation characteristics of jointed rock mass disc specimen containing a central straight notch under Brazilian test.
文摘为提升废弃混凝土资源化利用效率,系统探究了硅灰与熟石灰单掺及复合改性对再生混凝土力学性能的影响。采用三重搅拌技术(triple mixing,TM),通过抗压试验和劈裂抗拉试验,研究再生混凝土的基本力学性能,并借助扫描电子显微镜(scanning electron microscope,SEM)解析其微观结构特征。结果表明:单掺硅灰或熟石灰对再生混凝土的抗压强度与劈裂抗拉强度提升有限,复合硅灰与熟石灰对其提升效果显著。微观分析显示,复合体系中的微观结构致密程度显著提高,骨料与浆体的粘接强度增强。研究成果可为再生粗骨料的应用提供参考。
基金supported by a grant from China railway corporation science and technology research and development plan project(Grant No.2017G005-B)funding support by Wuyi University’s Hong Kong and Macao Joint Research and Development Fund(Grants No.2021WGALH15)funding support by the Innovation and Technology Commission of Hong Kong SAR Government to the Hong Kong Branch of National Rail Transit Electrification and Automation Engineering Technology Research Center(Grant No.K-BBY1).
文摘The current technical standards primarily relied on experience to judge the interfacial bonding properties between the self-compacting concrete filling layer and the steam-cured concrete precast slab in CRTS Ⅲ slab ballastless track structure.This study sought to enhance technical standards for evaluating interfacial bonding properties by suggesting the use of the splitting tensile strength to evaluate the impact of bubble defects.Specimens were fabricated through on-site experiment.The percent of each area of 6 cm^(2)or more bubble defect was 0 in most of specimens.When the cumulative area of all bub-ble defects reached 12%,the splitting tensile strength value was 0.67 MPa,which exceeded the minimum required value of 0.5 MPa for ensuring bonding interface adhesion.Furthermore,when the cumulative area of all bubble defects reached 8%,the splitting tensile strength value was 0.85 MPa,which exceeded the minimum required value of 0.8 MPa,thereby over-coming the negative impact of each area of 10 cm^(2) or more bubble defect.Additionally,keeping the cumulative area of each area of 6 cm^(2) or more bubble defect below 6%ensured adequate bonding strength and reduced the occurrence of specimens with lower splitting tensile strength values.
文摘In this work, compressive, flexural and split tensile strength together with coefficient of water absorption of high performance self-compacting concrete containing different amount of Fe2Os nanoparticles have been investigated. The strength and the water permeability of the specimens have been improved by adding Fe2Os nanoparticles in the cement paste up to 4.0 wt%. Fe203 nanoparticle as a foreign nucleation site could accelerate C-S-H gel formation as a result of increased crystalline Ca（OH）2 amount especially at the early age of hydration and hence increase the strength of the specimens. In addition, Fe203 nanoparticles are able to act as nanofillers and recover the pore structure of the specimens by decreasing harmful pores to improve the water permeability. Several empirical relations have been presented to predict the flexural and the split tensile strength of the specimens by means of the corresponding compressive strength at a certain age of curing. Accelerated peak appearance in conduction calorimetry tests, more weight loss in thermogravimetric analysis and more rapid appearance of peaks related to hydrated products in X-ray diffraction results indicate that Fe203 nanoparticles up to 4 wt% could improve the mechanical and the physical properties of the specimens.
基金Funded by Outstanding Youth Science Foundation of Henan Province of China (No. 04120002300)
文摘Tests were carried out to study the strength deterioration of concrete cooled in air or by water after sub-high temperature at different level and varying with cycles. It is proved that the cross-shaped cracks turned up and extended little by little on the surface of specimen subjected to repeat sub-high temperature, the splitting failure is characterized by cross-shaped cracks after 30 cycles, the concrete strengths decrease rapidly at early stage and to be steady subsequently with the increase of the temperature cycles, the splitting-tensile strength is more sensitive to temperature cycles than the compressive strength, the decline of concrete strength is mainly controlled by the maximum temperature having reached, the ultrasonic velocity in concrete is also declined. On the basis of test results, the mechanisms of sub-high temperature to the strength deterioration of concrete are analyzed.The formulas for calculating the compressive and splitting-tensile strength of concrete relating to the variation of temperature are proposed.
文摘In the present paper, two models based on artificial neural networks and genetic programming for predicting split tensile strength and percentage of water absorption of concretes containing ZrO2 nanoparticles have been developed at different ages of curing. For building these models, training and testing using experimental results for 144 specimens produced with 16 different mixture proportions were conducted. The data used in the multilayer feed forward neural networks models and input variables of genetic programming models were arranged in a format of eight input parameters that cover the cement content, nanoparticle content, aggregate type, water content, the amount of superplasticizer, the type of curing medium, age of curing and number of testing try. According to these input parameters, in the neural networks and genetic programming models, the split tensile strength and percentage of water absorption values of concretes containing ZrO2 nanoparticles were predicted. The training and testing results in the neural network and genetic programming models have shown that two models have strong potential for predicting the split tensile strength and percentage of water absorption values of concretes containing ZrO2 nanoparticles. It has been found that neural network （NN） and gene expression programming （GEP） models will be valid within the ranges of variables. In neural networks model, as the training and testing ended when minimum error norm of network gained, the best results were obtained and in genetic programming model, when 4 genes were selected to construct the model, the best results were acquired. Although neural network have predicted better results, genetic programming is able to predict reasonable values with a simpler method rather than neural network.
基金Project(Xiangjianke(2007)No.425) supported by Scientific Research Fund of Hunan Provincial Construction DepartmentProject supported by the Youth Framework Teacher Fund of Xiangtan University(2006)
文摘Through adding different additional water use,the compressive strength,splitting tensile strength and fluidity of recycled concrete of three aggregate combination forms were studied by experiment respectively.The experimental results show that with the increase of adding additional water use,the compressive strength and splitting tensile strength of recycled coarse aggregate concrete decrease,but that of recycled fine aggregate concrete and recycled all aggregate concrete increase firstly then decrease.When additional water use is added more 15% or 20% than that of basic ordinary concrete,the recycled coarse aggregate concrete and fine one can get pretty good fluidity.When it is added more 30%,the recycled all aggregate concrete has fluidity that is just satisfied.
