In order to implement the dynamic characteristic of a dual power-split transmission, a dynamic me- chanics model is built. Firstly, according to the method of theoretical analysis of the tooth contact analysis （TCA）...In order to implement the dynamic characteristic of a dual power-split transmission, a dynamic me- chanics model is built. Firstly, according to the method of theoretical analysis of the tooth contact analysis （TCA） and loaded tooth contact analysis （LTCA）, the actual meshing process of each gear pairs is simulated, and the time-varying mesh stiffness excitations are obtained, which can improve the numerical precision. Second- ly, by using the lumped mass method, the bending-torsional coupling three dimensional dynamic model of the dual power-split transmission is established, and the identical dimensionless equations are deduced by elimina- ting the effect of rigid displacement and the method of dimensional normalization. Finally, by the method of the fourth order Runge-Kutta algorithm with variable step lengths, the responses of this system in a frequency domain and time domain are obtained, and the dynamic load change characteristics of each gear pairs are analyzed. The results show that the establishment, solution and analysis of the system dynamics model could provide a basis for the dynamic design, and have an important significance for the dynamic efficiency analysis and dynamic perform- ance optimization design of the dual power-split transmission.展开更多
Dynamic properties of rocks are important in a variety of rock mechanics and rock engineering problems. Due to the transient nature of the loading, dynamic tests of rock materials are very different from and much more...Dynamic properties of rocks are important in a variety of rock mechanics and rock engineering problems. Due to the transient nature of the loading, dynamic tests of rock materials are very different from and much more challenging than their static counterparts. Dynamic tests are usually conducted using the split Hopkinson bar or Kolsl^j bar systems, which include both split Hopkinson pressure bar （SHPB） and split Hopkinson tension bar （SHTB） systems. Significant progress has been made on the quantification of various rock dynamic properties, owing to the advances in the experimental techniques of SHPB system. This review aims to fully describe and critically assess the detailed procedures and principles of tech- niques for dynamic rock tests using split Hopkinson bars. The history and principles of SHPB are outlined, followed by the key loading techniques that are useful for dynamic rock tests with SHPB （i.e. pulse shaping, momentum-trap and multi-axial loading techniques）. Various measurement techniques for rock tests in SHPB （i.e. X-ray micro computed tomography （CT）, laser gap gauge （LGG）, digital image corre- lation （DIC）, Moir~ method, caustics method, photoelastic coating method, dynamic infrared thermog- raphy） are then discussed. As the main objective of the review, various dynamic measurement techniques for rocks using SHPB are described, including dynamic rock strength measurements （i.e. dynamic compression, tension, bending and shear tests）, dynamic fracture measurements （i.e. dynamic imitation and propagation fracture toughness, dynamic fracture energy and fracture velocity）, and dy- namic techniques for studying the influences of temperature and pore water.展开更多
To investigate the design strategy of highly loaded tandem cascades at both the midspan and endwall,the overall performance and flow mechanisms of four typical tandem cascades based on the optimization were analyzed f...To investigate the design strategy of highly loaded tandem cascades at both the midspan and endwall,the overall performance and flow mechanisms of four typical tandem cascades based on the optimization were analyzed from multiple perspectives numerically.The results show that the interference effects on the Front Blade(FB)and Rear Blade(RB)should not be overlooked during the design phase,and the design strategies at the midspan and endwall are completely different.At the midspan,the optimization aims to increase the interference effects and the strength of the gap jet while maintaining the same load on the FB and RB.However,the endwall optimal airfoil exhibits weakening interference effects,advancement of the gap jet location,and load transfer from the FB to RB.Through further analysis of flow characteristics,the midspan optimal airfoil is beneficial for inhibiting the low-energy fluid from interacting with the suction surface of RB under the design condition,but results in earlier occurrence of corner stall.The endwall optimal airfoil helps suppress the development of the secondary flow and delay the onset of corner stall.Furthermore,by combining the benefits of these two design approaches,additional forward sweep effects are achieved,further enhancing the performance of the tandem cascade.展开更多
Researches on ultra-high performance concrete (UHPC) have been conducted worldwide owing to its outstanding durability and strength performances. The exploitation of the mechanical properties of UHPC will render it po...Researches on ultra-high performance concrete (UHPC) have been conducted worldwide owing to its outstanding durability and strength performances. The exploitation of the mechanical properties of UHPC will render it possible to achieve economic design through substantial reduction in the cross sectional dimensions and simplification in the reinforcement arrangement. This paper investigates experimentally the load transfer in the prestressed concrete anchorage zone. To provide distinctive features of UHPC compared to ordinary concrete, the cross sectional dimensions of the member were reduced and the stress distribution, deformation and cracking pattern of the PS anchorage zone were examined experimentally according to the degree of reinforcement of the members chosen. The distributions of the bursting stress, spalling stress and longitudinal edge stress in the specimens were observed according to the various types of reinforcement. All the specimens satisfied the load-bearing capacity criterion specified by the European ETAG-013 guidelines and their stress distributions were similar to those in the PS anchorages of post-tensioned members applying ordinary concrete. The cracks propagated longitudinally with lengths up to twice the cross sectional dimensions and their width was smaller than when applying ordinary concrete owing to the bridging effect of the steel fibers in UHPC. Accordingly, the exploitation of the high strength of UHPC enabled us to secure the resistance of the anchorage with no need for particular reinforcing devices.展开更多
Cemented tailings backfill(CTB) have increasingly been used in recent years to improve the stability of mining stopes in deep underground mines. Deep mining processes are often associated with rock bursting and high-s...Cemented tailings backfill(CTB) have increasingly been used in recent years to improve the stability of mining stopes in deep underground mines. Deep mining processes are often associated with rock bursting and high-speed dynamic loading conditions. Therefore, it is important to investigate the characteristics and dynamic mechanical behavior of CTB. This paper presents the results of dynamic tests on CTB specimens with different cement and solid contents using a split Hopkinson pressure bar(SHPB). The results showed that some CTB specimens exhibited one to two lower stress peaks after reaching dynamic peak stress before they completely failed. The greater the cement-to-tailings ratio is, the more obvious the strain reaction. This property mainly manifested as follows. First,the dynamic peak stress increased with the increase of the cement-to-tailings ratio when the impact velocity was fixed. Second, the dynamic peak stress had a quadratic relationship with the average stress rate. Third, the cement-to-tailings ratio could enhance the increase rate of dynamic peak stress with strain rate. In addition, the dynamic strength enhancement factor K increased with the increase of strain rate, and its value was larger than that of the rock samples. The failure modes of CTB specimens under low-speed impact were tensile failure and X conjugate shear failure, where were nearly the same as those under static uniaxial and triaxial compression. The CTB specimens were crushed and broken under critical strain, a failure mode similar to that of low-strength concrete. The results of the experimental research can improve the understanding of the dynamic mechanical properties of CTB and guide the strength design of deep mining backfills.展开更多
Cemented tailings backfill(CTB)structures are important components of underground mine stopes.It is important to investigate the characteristics and dynamic behavior of CTB materials because they are susceptible to di...Cemented tailings backfill(CTB)structures are important components of underground mine stopes.It is important to investigate the characteristics and dynamic behavior of CTB materials because they are susceptible to disturbance by dynamic loading,such as excavation and blasting.In this study,the authors present the results of a series of Split-Hopkinson pressure bar(SHPB)single and cyclic impact loading tests on CTB specimens to investigate the long-term dynamic mechanical properties of CTB.The stress-strain relationship,dynamic strength,and dynamic failure characteristics of CTB specimens are analyzed and discussed to provide valuable conclusions that will improve our knowledge of CTB long-term mechanical behavior and characteristics.For instance,the dynamic peak stress under cyclic impact loading is approximately twice that under single impact loading,and the CTB specimens are less prone to fracture when cyclically loaded.These findings and conclusions can provide a new set of references for the stability analysis of CTB materials and help guide mine designers in reducing the amount of binding agents and the associated mining cost.展开更多
Since loading wave shapes are very important in the study of rock dynamical properties, a new procedure for obtaining a variety of wave shapes using equidiameter impact hammer of conventional SHPB device is proposed b...Since loading wave shapes are very important in the study of rock dynamical properties, a new procedure for obtaining a variety of wave shapes using equidiameter impact hammer of conventional SHPB device is proposed based on theoretical analysis. Experiment shows that different loading wave shapes can be obtained through varying the radius at impact end of hammer. Experiment results are quite consistent with the theoretical analysis.展开更多
基金supported by the Natural Science Foundation of China under Grant No.51175423
文摘In order to implement the dynamic characteristic of a dual power-split transmission, a dynamic me- chanics model is built. Firstly, according to the method of theoretical analysis of the tooth contact analysis （TCA） and loaded tooth contact analysis （LTCA）, the actual meshing process of each gear pairs is simulated, and the time-varying mesh stiffness excitations are obtained, which can improve the numerical precision. Second- ly, by using the lumped mass method, the bending-torsional coupling three dimensional dynamic model of the dual power-split transmission is established, and the identical dimensionless equations are deduced by elimina- ting the effect of rigid displacement and the method of dimensional normalization. Finally, by the method of the fourth order Runge-Kutta algorithm with variable step lengths, the responses of this system in a frequency domain and time domain are obtained, and the dynamic load change characteristics of each gear pairs are analyzed. The results show that the establishment, solution and analysis of the system dynamics model could provide a basis for the dynamic design, and have an important significance for the dynamic efficiency analysis and dynamic perform- ance optimization design of the dual power-split transmission.
文摘Dynamic properties of rocks are important in a variety of rock mechanics and rock engineering problems. Due to the transient nature of the loading, dynamic tests of rock materials are very different from and much more challenging than their static counterparts. Dynamic tests are usually conducted using the split Hopkinson bar or Kolsl^j bar systems, which include both split Hopkinson pressure bar （SHPB） and split Hopkinson tension bar （SHTB） systems. Significant progress has been made on the quantification of various rock dynamic properties, owing to the advances in the experimental techniques of SHPB system. This review aims to fully describe and critically assess the detailed procedures and principles of tech- niques for dynamic rock tests using split Hopkinson bars. The history and principles of SHPB are outlined, followed by the key loading techniques that are useful for dynamic rock tests with SHPB （i.e. pulse shaping, momentum-trap and multi-axial loading techniques）. Various measurement techniques for rock tests in SHPB （i.e. X-ray micro computed tomography （CT）, laser gap gauge （LGG）, digital image corre- lation （DIC）, Moir~ method, caustics method, photoelastic coating method, dynamic infrared thermog- raphy） are then discussed. As the main objective of the review, various dynamic measurement techniques for rocks using SHPB are described, including dynamic rock strength measurements （i.e. dynamic compression, tension, bending and shear tests）, dynamic fracture measurements （i.e. dynamic imitation and propagation fracture toughness, dynamic fracture energy and fracture velocity）, and dy- namic techniques for studying the influences of temperature and pore water.
基金sponsored by the National Natural Science Foundation of China(Nos.52106057 and 92152301)the Fundamental Research Funds for the Central Universities,China(No.D5000210483)+2 种基金the Foundation of State Level Key Laboratory of Airfoil and Cascade Aerodynamics,China(Nos.D5150210006 and D5050220008)the 111 Project,China(No.B17037)the Key Laboratory of Flow Visualization and Measurement Techniques,AVIC Aerodynamics Research Institute,China(No.D5110220177).
文摘To investigate the design strategy of highly loaded tandem cascades at both the midspan and endwall,the overall performance and flow mechanisms of four typical tandem cascades based on the optimization were analyzed from multiple perspectives numerically.The results show that the interference effects on the Front Blade(FB)and Rear Blade(RB)should not be overlooked during the design phase,and the design strategies at the midspan and endwall are completely different.At the midspan,the optimization aims to increase the interference effects and the strength of the gap jet while maintaining the same load on the FB and RB.However,the endwall optimal airfoil exhibits weakening interference effects,advancement of the gap jet location,and load transfer from the FB to RB.Through further analysis of flow characteristics,the midspan optimal airfoil is beneficial for inhibiting the low-energy fluid from interacting with the suction surface of RB under the design condition,but results in earlier occurrence of corner stall.The endwall optimal airfoil helps suppress the development of the secondary flow and delay the onset of corner stall.Furthermore,by combining the benefits of these two design approaches,additional forward sweep effects are achieved,further enhancing the performance of the tandem cascade.
文摘Researches on ultra-high performance concrete (UHPC) have been conducted worldwide owing to its outstanding durability and strength performances. The exploitation of the mechanical properties of UHPC will render it possible to achieve economic design through substantial reduction in the cross sectional dimensions and simplification in the reinforcement arrangement. This paper investigates experimentally the load transfer in the prestressed concrete anchorage zone. To provide distinctive features of UHPC compared to ordinary concrete, the cross sectional dimensions of the member were reduced and the stress distribution, deformation and cracking pattern of the PS anchorage zone were examined experimentally according to the degree of reinforcement of the members chosen. The distributions of the bursting stress, spalling stress and longitudinal edge stress in the specimens were observed according to the various types of reinforcement. All the specimens satisfied the load-bearing capacity criterion specified by the European ETAG-013 guidelines and their stress distributions were similar to those in the PS anchorages of post-tensioned members applying ordinary concrete. The cracks propagated longitudinally with lengths up to twice the cross sectional dimensions and their width was smaller than when applying ordinary concrete owing to the bridging effect of the steel fibers in UHPC. Accordingly, the exploitation of the high strength of UHPC enabled us to secure the resistance of the anchorage with no need for particular reinforcing devices.
基金financially supported by the National Key R&D Program of China (No. 2018YFC0604602)the Fundamental Research Funds for the Central Universities of China (No. FRF-TP-17-029A2)the Open fund of Key Laboratory of High-Efficient Mining and Safety of Metal Mines, Ministry of Education of China (No. ustbmslab201803)
文摘Cemented tailings backfill(CTB) have increasingly been used in recent years to improve the stability of mining stopes in deep underground mines. Deep mining processes are often associated with rock bursting and high-speed dynamic loading conditions. Therefore, it is important to investigate the characteristics and dynamic mechanical behavior of CTB. This paper presents the results of dynamic tests on CTB specimens with different cement and solid contents using a split Hopkinson pressure bar(SHPB). The results showed that some CTB specimens exhibited one to two lower stress peaks after reaching dynamic peak stress before they completely failed. The greater the cement-to-tailings ratio is, the more obvious the strain reaction. This property mainly manifested as follows. First,the dynamic peak stress increased with the increase of the cement-to-tailings ratio when the impact velocity was fixed. Second, the dynamic peak stress had a quadratic relationship with the average stress rate. Third, the cement-to-tailings ratio could enhance the increase rate of dynamic peak stress with strain rate. In addition, the dynamic strength enhancement factor K increased with the increase of strain rate, and its value was larger than that of the rock samples. The failure modes of CTB specimens under low-speed impact were tensile failure and X conjugate shear failure, where were nearly the same as those under static uniaxial and triaxial compression. The CTB specimens were crushed and broken under critical strain, a failure mode similar to that of low-strength concrete. The results of the experimental research can improve the understanding of the dynamic mechanical properties of CTB and guide the strength design of deep mining backfills.
基金financially supported by the National Key R&D Program of China (No. 2017YFC0602900)the Fundamental Research Funds for the Central Universities (No. FRF-TP-17-029A2)the Open Fund of Key Laboratory of High-Efficient Mining and Safety of Metal Mines (Ministry of Education of China, No. ustbmslab201803)
文摘Cemented tailings backfill(CTB)structures are important components of underground mine stopes.It is important to investigate the characteristics and dynamic behavior of CTB materials because they are susceptible to disturbance by dynamic loading,such as excavation and blasting.In this study,the authors present the results of a series of Split-Hopkinson pressure bar(SHPB)single and cyclic impact loading tests on CTB specimens to investigate the long-term dynamic mechanical properties of CTB.The stress-strain relationship,dynamic strength,and dynamic failure characteristics of CTB specimens are analyzed and discussed to provide valuable conclusions that will improve our knowledge of CTB long-term mechanical behavior and characteristics.For instance,the dynamic peak stress under cyclic impact loading is approximately twice that under single impact loading,and the CTB specimens are less prone to fracture when cyclically loaded.These findings and conclusions can provide a new set of references for the stability analysis of CTB materials and help guide mine designers in reducing the amount of binding agents and the associated mining cost.
文摘Since loading wave shapes are very important in the study of rock dynamical properties, a new procedure for obtaining a variety of wave shapes using equidiameter impact hammer of conventional SHPB device is proposed based on theoretical analysis. Experiment shows that different loading wave shapes can be obtained through varying the radius at impact end of hammer. Experiment results are quite consistent with the theoretical analysis.
