In order to consider the influence of steel pole on the measurement of wind speed sensors and determinate the installation position of wind speed sensors, the flow field around wind speed sensors was investigated. Bas...In order to consider the influence of steel pole on the measurement of wind speed sensors and determinate the installation position of wind speed sensors, the flow field around wind speed sensors was investigated. Based on the three-dimensional steady Reynolds-averaged Navier-Stokes equations and k-ε double equations turbulent model, the field flow around the wind speed sensor and the steel pole along a high-speed railway was simulated on an unstructured grid. The grid-independent validation was conducted and the accuracy of the present numerical simulation method was validated by experiments and simulations carried out by previous researchers. Results show that the steel pole has a significant influence on the measurement results of wind speed sensors. As the distance between two wind speed sensors is varied from 0.3 to 1.0 m, the impact angles are less than ±20°, it is proposed that the distance between two wind speed sensors is 0.8 m at least, and the interval between wind speed sensors and the steel pole is more than 1.0 m with the sensors located on the upstream side.展开更多
According to the verification regulation of the Wind Direction and Wind Speed Sensor of Automatic Meteorological Station[JJG(meteorological)004-2011],relying on the wind tunnel laboratory of Hebei meteorological measu...According to the verification regulation of the Wind Direction and Wind Speed Sensor of Automatic Meteorological Station[JJG(meteorological)004-2011],relying on the wind tunnel laboratory of Hebei meteorological measurement station,EL15-1 A type of wind speed sensor in the automatic weather station was verified.The experimental data of sensor verification in different laboratory environments were obtained through data comparison.Using standard wind speed measurement formula,the influence of laboratory temperature,humidity and air pressure on verification results was analyzed quantitatively.The results showed that laboratory temperature had the greatest influence on the verification results of this type of sensor,while the humidity and air pressure had less influence.Therefore,it should be noted that the temperature change in the laboratory should not be too large in the process of verification,so as to improve the accuracy of the verification results.展开更多
The low-altitude transport has demonstrated significant growth potential driven by rapid advancements in unmanned aerial vehicles(UAVs)technology.Herein,rotor UAVs are increasingly favored by consumers due to their un...The low-altitude transport has demonstrated significant growth potential driven by rapid advancements in unmanned aerial vehicles(UAVs)technology.Herein,rotor UAVs are increasingly favored by consumers due to their unique advantages.The UAVs motion is altered by adjusting propeller speed,which is governed by motor speed.Consequently,motor speed is a key factor influencing flight performance that is susceptible to environmental interference.Accurate and real-time monitoring of motor speed is essential.Conventional speed sensors are bulky,reliant on external power,and challenging to integration into compact UAVs systems.They also suffer from insufficient accuracy and unstable measurements,particularly with small motors.This article introduces a self-powered digital aircraft rotational speed sensor(SDARSS)utilizing a rotating triboelectric nanogenerators(TENGs)to address current challenges.This sensor is lightweight,energy-efficient,and self-powered,weighing only 2.185 g and measuring 3.43 mm in thickness,with an accuracy exceeding 99.94%.It measures speeds up to 10,000 revolutions per minute(rpm)with exceptional precision and stability.The sensor enables real-time monitoring of UAVs motor speeds,which is crucial for enhancing flight safety.展开更多
The accurate estimation of expressway traffic state can provide decision-making for both travelers and traffic managers.The speed is one of the most representative parameter of the traffic state.So the expressway spee...The accurate estimation of expressway traffic state can provide decision-making for both travelers and traffic managers.The speed is one of the most representative parameter of the traffic state.So the expressway speed spatial distribution can be taken as the expressway traffic state equivalent.In this paper,an algorithm based on virtual speed sensors(VSS)is presented to estimate the expressway traffic state(the speed spatial distribution).To gain the spatial distribution of expressway traffic state,virtual speed sensors are defined between adjacent traffic flow sensors.Then,the speed data extracted from traffic flow sensors in time series are mapped to space series to design virtual speed sensors.Then the speed of virtual speed sensors can be calculated with the weight matrix which is related with the speed of virtual speed sensors and the speed data extracted from traffic flow sensors and the speed data extracted from traffic flow sensors in time series.Finally,the expressway traffic state(the speed spatial distribution)can be gained.The acquisition of average travel speed of the expressway is taken for application of this traffic state estimation algorithm.One typical expressway in Beijing is adopted for the experiment analysis.The results prove that this traffic state estimation approach based on VSS is feasible and can achieve a high accuracy.展开更多
The early warning and monitoring of gale disasters are very important for the safety of people’s lives and properties. Triboelectric nanogenerators(TENGs) are popular for wind speed sensors due to their self-powered ...The early warning and monitoring of gale disasters are very important for the safety of people’s lives and properties. Triboelectric nanogenerators(TENGs) are popular for wind speed sensors due to their self-powered property. However, a TENG cannot easily work at low wind speeds due to the limitation of the high frictional resistance structure. In this paper, a TENG-based breezeactivated wind speed sensor(BAWS) with an ultra-low frictional resistance is proposed. The key drive unit of the BAWS is a Savonius-like vertical axis wind turbine, which is fabricated by arrayed airfoil profile blades with excellent flow field characteristics. Here a wind turbine plays dual roles in driving the electromagnetic generator below it to supply energy and lead the TENG above it to sense the wind force. Compared to a classical turbine with a wind cup, the designed turbine has a low resistance torque. The synergistic effect of the drive unit with low-resistance and triboelectric materials with low viscosity allows the BAWS to be activated even at a wind speed of 2.9 m/s. The sensitivities of the voltage frequency and current amplitude of the TENG are used to reflect the electrical property of the BAWS. The measured values are 0.291 Hz/(m·s-1) and 0.221 μA/(m·s-1),which reflects the good sensitivity of the BAWS. Moreover, the linearity of the BAWS reaches up to 0.991, which shows an accurate output for the wind speed. In addition, the device is equipped with a combined electromagnetic-solar unit as the sole power source to meet the sensor’s all-weather operation requirements. This work expands the application prospects of selfpowered sensing technology in the field of disaster warning.展开更多
The high speed maglev is mainly characterized by propulsion using linear synchronous motor (LSM) and vehicle levitation from the guideway surface. In LSM propulsion control, the position detection sensor is used to de...The high speed maglev is mainly characterized by propulsion using linear synchronous motor (LSM) and vehicle levitation from the guideway surface. In LSM propulsion control, the position detection sensor is used to detect running vehicle position for synchronized current generation. To maintain the stable levitating condition during vehicle running, the irregularity of guideway surface should be monitored by sensors measuring the displacement and acceleration between vehicle and guideway. In this study, the application methods of these sensors in the high speed maglev are investigated and through the experiments by using the small-scale test bed, the validity of examined methods is confirmed.展开更多
In most areas of China, affected by the environment of low temperature and high humidity, the wind speed sensor and wind direction sensor are frozen and cannot output data in autumn, winter or the alternation of winte...In most areas of China, affected by the environment of low temperature and high humidity, the wind speed sensor and wind direction sensor are frozen and cannot output data in autumn, winter or the alternation of winter and spring. In order to solve the freezing situation of the wind sensor, this paper designs a new type of antifreeze wind speed sensor. After meteorology performance testing and field observation tests, the correlation coefficient of the observation data is demonstrated, and the data curve is fitted. The result shows the sensor is stable, and has a good antifreeze effect, the data output is reliable.展开更多
针对风机偏航转速传感器在长期运行中受偏航旋转工况影响易出现供电不连续与电压波动的问题,开展基于有限电源(Limited Power Source,LPS)冗余供电的稳定性改造应用研究。通过在传感器供电侧引入LPS冗余供电方式,从供电连续性增强、供...针对风机偏航转速传感器在长期运行中受偏航旋转工况影响易出现供电不连续与电压波动的问题,开展基于有限电源(Limited Power Source,LPS)冗余供电的稳定性改造应用研究。通过在传感器供电侧引入LPS冗余供电方式,从供电连续性增强、供电波动抑制及转速信号稳定输出3个方面分析LPS冗余供电在稳定性改造方面的应用,并结合工程实例对改造效果进行对比分析。结果表明,引入LPS冗余供电能够有效提升偏航转速传感器运行稳定性,具有良好的工程应用价值。展开更多
基金Projects(U1334205,51205418)supported by the National Natural Science Foundation of ChinaProject(2014T002-A)supported by the Science and Technology Research Program of China Railway CorporationProject(132014)supported by the Fok Ying Tong Education Foundation of China
文摘In order to consider the influence of steel pole on the measurement of wind speed sensors and determinate the installation position of wind speed sensors, the flow field around wind speed sensors was investigated. Based on the three-dimensional steady Reynolds-averaged Navier-Stokes equations and k-ε double equations turbulent model, the field flow around the wind speed sensor and the steel pole along a high-speed railway was simulated on an unstructured grid. The grid-independent validation was conducted and the accuracy of the present numerical simulation method was validated by experiments and simulations carried out by previous researchers. Results show that the steel pole has a significant influence on the measurement results of wind speed sensors. As the distance between two wind speed sensors is varied from 0.3 to 1.0 m, the impact angles are less than ±20°, it is proposed that the distance between two wind speed sensors is 0.8 m at least, and the interval between wind speed sensors and the steel pole is more than 1.0 m with the sensors located on the upstream side.
文摘According to the verification regulation of the Wind Direction and Wind Speed Sensor of Automatic Meteorological Station[JJG(meteorological)004-2011],relying on the wind tunnel laboratory of Hebei meteorological measurement station,EL15-1 A type of wind speed sensor in the automatic weather station was verified.The experimental data of sensor verification in different laboratory environments were obtained through data comparison.Using standard wind speed measurement formula,the influence of laboratory temperature,humidity and air pressure on verification results was analyzed quantitatively.The results showed that laboratory temperature had the greatest influence on the verification results of this type of sensor,while the humidity and air pressure had less influence.Therefore,it should be noted that the temperature change in the laboratory should not be too large in the process of verification,so as to improve the accuracy of the verification results.
基金supported by the National Natural Science Foundation of China(No.52203324)the National Key R&D Program of China(No.2023YFB2604600)+1 种基金the National Key R&D Project from the Minister of Science and Technology(No.2021YFA1201601)Thanks to the Georgia Institute of Technology for providing software support。
文摘The low-altitude transport has demonstrated significant growth potential driven by rapid advancements in unmanned aerial vehicles(UAVs)technology.Herein,rotor UAVs are increasingly favored by consumers due to their unique advantages.The UAVs motion is altered by adjusting propeller speed,which is governed by motor speed.Consequently,motor speed is a key factor influencing flight performance that is susceptible to environmental interference.Accurate and real-time monitoring of motor speed is essential.Conventional speed sensors are bulky,reliant on external power,and challenging to integration into compact UAVs systems.They also suffer from insufficient accuracy and unstable measurements,particularly with small motors.This article introduces a self-powered digital aircraft rotational speed sensor(SDARSS)utilizing a rotating triboelectric nanogenerators(TENGs)to address current challenges.This sensor is lightweight,energy-efficient,and self-powered,weighing only 2.185 g and measuring 3.43 mm in thickness,with an accuracy exceeding 99.94%.It measures speeds up to 10,000 revolutions per minute(rpm)with exceptional precision and stability.The sensor enables real-time monitoring of UAVs motor speeds,which is crucial for enhancing flight safety.
基金supported by the Beijing Science Foundation Plan Projects(Grant No.D07020601400707,D101106049710005)the National Hi-Tech Research and Development Program of China("863"Project)(Grant No.2006AA11Z231)the National Natural Science Foundation of China(Grant No.61104164)
文摘The accurate estimation of expressway traffic state can provide decision-making for both travelers and traffic managers.The speed is one of the most representative parameter of the traffic state.So the expressway speed spatial distribution can be taken as the expressway traffic state equivalent.In this paper,an algorithm based on virtual speed sensors(VSS)is presented to estimate the expressway traffic state(the speed spatial distribution).To gain the spatial distribution of expressway traffic state,virtual speed sensors are defined between adjacent traffic flow sensors.Then,the speed data extracted from traffic flow sensors in time series are mapped to space series to design virtual speed sensors.Then the speed of virtual speed sensors can be calculated with the weight matrix which is related with the speed of virtual speed sensors and the speed data extracted from traffic flow sensors and the speed data extracted from traffic flow sensors in time series.Finally,the expressway traffic state(the speed spatial distribution)can be gained.The acquisition of average travel speed of the expressway is taken for application of this traffic state estimation algorithm.One typical expressway in Beijing is adopted for the experiment analysis.The results prove that this traffic state estimation approach based on VSS is feasible and can achieve a high accuracy.
基金supported by the National Natural Science Foundation of China (Grant Nos. 51975542, 62101513, and 62171414)Young Academic Leaders Project of North University of China (Grant No. 11045501)。
文摘The early warning and monitoring of gale disasters are very important for the safety of people’s lives and properties. Triboelectric nanogenerators(TENGs) are popular for wind speed sensors due to their self-powered property. However, a TENG cannot easily work at low wind speeds due to the limitation of the high frictional resistance structure. In this paper, a TENG-based breezeactivated wind speed sensor(BAWS) with an ultra-low frictional resistance is proposed. The key drive unit of the BAWS is a Savonius-like vertical axis wind turbine, which is fabricated by arrayed airfoil profile blades with excellent flow field characteristics. Here a wind turbine plays dual roles in driving the electromagnetic generator below it to supply energy and lead the TENG above it to sense the wind force. Compared to a classical turbine with a wind cup, the designed turbine has a low resistance torque. The synergistic effect of the drive unit with low-resistance and triboelectric materials with low viscosity allows the BAWS to be activated even at a wind speed of 2.9 m/s. The sensitivities of the voltage frequency and current amplitude of the TENG are used to reflect the electrical property of the BAWS. The measured values are 0.291 Hz/(m·s-1) and 0.221 μA/(m·s-1),which reflects the good sensitivity of the BAWS. Moreover, the linearity of the BAWS reaches up to 0.991, which shows an accurate output for the wind speed. In addition, the device is equipped with a combined electromagnetic-solar unit as the sole power source to meet the sensor’s all-weather operation requirements. This work expands the application prospects of selfpowered sensing technology in the field of disaster warning.
文摘The high speed maglev is mainly characterized by propulsion using linear synchronous motor (LSM) and vehicle levitation from the guideway surface. In LSM propulsion control, the position detection sensor is used to detect running vehicle position for synchronized current generation. To maintain the stable levitating condition during vehicle running, the irregularity of guideway surface should be monitored by sensors measuring the displacement and acceleration between vehicle and guideway. In this study, the application methods of these sensors in the high speed maglev are investigated and through the experiments by using the small-scale test bed, the validity of examined methods is confirmed.
文摘In most areas of China, affected by the environment of low temperature and high humidity, the wind speed sensor and wind direction sensor are frozen and cannot output data in autumn, winter or the alternation of winter and spring. In order to solve the freezing situation of the wind sensor, this paper designs a new type of antifreeze wind speed sensor. After meteorology performance testing and field observation tests, the correlation coefficient of the observation data is demonstrated, and the data curve is fitted. The result shows the sensor is stable, and has a good antifreeze effect, the data output is reliable.
文摘针对风机偏航转速传感器在长期运行中受偏航旋转工况影响易出现供电不连续与电压波动的问题,开展基于有限电源(Limited Power Source,LPS)冗余供电的稳定性改造应用研究。通过在传感器供电侧引入LPS冗余供电方式,从供电连续性增强、供电波动抑制及转速信号稳定输出3个方面分析LPS冗余供电在稳定性改造方面的应用,并结合工程实例对改造效果进行对比分析。结果表明,引入LPS冗余供电能够有效提升偏航转速传感器运行稳定性,具有良好的工程应用价值。
