Effects of NHj concentiation, solution/soil ratio and temperature on NH_4^+adsorption were studied in a Eum-Orthic Anthrosol. The slopes of the soil NH_4^+ adsorptionisotherms and the fitted n, the coefficient for the...Effects of NHj concentiation, solution/soil ratio and temperature on NH_4^+adsorption were studied in a Eum-Orthic Anthrosol. The slopes of the soil NH_4^+ adsorptionisotherms and the fitted n, the coefficient for the adsorption intensity, and kappa, the coefficientrelated to adsorption capacity, of the Freundlich equation increased with increasing solution/soilratio (SSR) and with decreasing temperature (T). For the range of experimental conditions, the valueof delta q/delta c, the rate of change of the amount of NH_4^+ adsorbed in the soil solid phase (q)with respect to the equilibrium concentration of NH_4^+ in soil solution (c), was 0.840, indicatingthat q increased with increasing c. From 2 to 45 deg C, delta q/delta SSR, the rate of change of qwith respect to SSR, decreased from 2.598 to 1.996, showing that q increased with increasing SSR,while its increasing rate decreased with temperature. From SSR 1:1 to 20:1, delta q/delta T, therate of change of q with respect to T, decreased from -- 0.095 to -- 0.361, indicating that qdecreased with increasing temperature, and at the same time the negative effect of temperaturebecame larger as SSR increased. Thus under the experimental conditions the order of importance indetermining the amount of NH_4^+ adsorbed in the soil solid phase was delta q/delta SSR > deltaq/delta c > |delta q/delta T|, indicating that the greatest effect on the amount of NH_4^+ adsorbedwas with the solution/soil ratio; the equilibrium concentration of NH_4^+ had a lesser effect; andtemperature had the least effect.展开更多
In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar perce...In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.展开更多
Let A be a 3×3 singular or diagonalizable matrix,all solutions to the Yang-Baxter-like matrix equation have been determined.However,finding all solutions for full rank,non-diagonalizable matrices remains challeng...Let A be a 3×3 singular or diagonalizable matrix,all solutions to the Yang-Baxter-like matrix equation have been determined.However,finding all solutions for full rank,non-diagonalizable matrices remains challenging.By utilizing classification techniques,we establish all solutions of the Yang-Baxter-like matrix equation in this paper when the coefficient matrix A is similar to non-diagonalizable matrix diag(λ,J_(2)(λ))withλ̸=0.More specifically,we divide the non-diagonal elements of the solution into 10 different cases.By discussing each situation,we establish all solutions of the Yang-Baxter-like matrix equation.The results of this work enrich the existing ones.展开更多
This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic fie...This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic field is assumed to satisfy the Neumann boundary condition,which was first investigated by Kazhikhov in 1987.We establish the global existence of the unique strong solutions to the MHD equations without any smallness conditions on the initial data.More precisely,our result can be regarded as a natural generalization of Kazhikov’s result for applying the constant heat-conductivity in bounded domains to the degenerate case in unbounded domains.展开更多
In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→...In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→∞)x′(t)e^(t)=0,where t_(0) and ψ_(0) are real constants,φ(s)=s/√1−s^(2),s∈R with s∈(−1,1),f:[t_(0),∞)×R→R satisfies the Lipschitz or Osgood-type conditions.展开更多
Ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry(FT-ICR MS)is an advanced instrument capable of separating and determining molecular mass-to-charge ratios with sub-ppm level accuracy.A ...Ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry(FT-ICR MS)is an advanced instrument capable of separating and determining molecular mass-to-charge ratios with sub-ppm level accuracy.A typical FT-ICR MS spectrogram can identify hundreds to thousands of formulas in a complex sample.This perspective briefly examines the application of FT-ICR MS to soil organic matter and plant biomass studies,highlighting their significant contributions to sustainable agriculture and environment.展开更多
Circumlunar abort trajectories constitute a vital contingency return strategy during the translunar phase of crewed lunar missions.This paper proposes a methodology for constructing the solution set of the circumlunar...Circumlunar abort trajectories constitute a vital contingency return strategy during the translunar phase of crewed lunar missions.This paper proposes a methodology for constructing the solution set of the circumlunar abort trajectory and leverages its advantageous properties to address the optimization design problem of abort trajectories.Initially,a solution set of all feasible abort trajectories,originating from an abort point on the nominal trajectory and complying with fundamental reentry constraints,is formulated through the introduction of two novel design parameters.Subsequently,the geometric characteristics of the solution set,as well as the distributional properties of key iterative constraint responses,including flight time and velocity increment,are analyzed.Finally,the characteristics exhibited in the solution set are employed to directly identify the design parameters of the abort trajectories with minimum flight time and velocity increment,thereby providing solutions to two distinct types of optimization problems.The simulation results for a variety of nominal trajectories,encompassing the reconstruction and redesign of the Apollo13 abort trajectory,validate the proposed method,demonstrating its ability to directly generate optimal abort trajectories.The method proposed in this paper investigates feasible abort trajectories from a global perspective,providing both a framework and convenience for mission planning and iterative optimization in abort trajectory design.展开更多
Strong seismic excitation and fault dislocation are likely to occur simultaneously in high-intensity seismic zones,causing severe damage to tunnels crossing active fault zones.This paper aims to develop a novel analyt...Strong seismic excitation and fault dislocation are likely to occur simultaneously in high-intensity seismic zones,causing severe damage to tunnels crossing active fault zones.This paper aims to develop a novel analytical solution to determine the longitudinal mechanical responses of tunnels subjected to the combined effects of seismic waves and strike-slip faulting.Adopting the elastic springbeam model,the seismic waves are modelled as shear horizontal(SH)waves and the fault dislocation follows an S-shaped pattern;the superposition principle for free-fielddisplacements caused by both effects is assumed.In addition,the transmission and reflectionof seismic waves at the fault-rock geological interface and the tangential contact conditions at the tunnel-rock interface are considered.The analytical model is validated against numerical simulations,confirmingits accuracy in calculating tunnel responses.Moreover,a parametric study is conducted to evaluate the impact of key factors,including fault displacement,fault zone width,fault dip angle,earthquake frequency,rock conditions,tunnel lining stiffness,and tangential contact conditions,on tunnel responses.Compared with each effect alone,the combined effects of seismic waves and strike-slip faulting significantlychange the tunnel deformation and internal forces,leading to increased tunnel responses,especially within the fault zone and near the fault-rock interfaces.Depending on specificparameters,tunnel responses can be classifiedinto seismic-dominated,faulting-dominated,and seismic-faulting coupled responses on the basis of the relative contributions of each effect.The proposed analytical solution can be applied to quickly predict the longitudinal mechanical behaviour of tunnels under such combined effects in engineering applications.展开更多
Substrate and nutrient supply are essential for vegetable cultivation in greenhouse.The strategies for plant nutrient supply vary depending on the cultivation methods or substrate dosages employed.With the development...Substrate and nutrient supply are essential for vegetable cultivation in greenhouse.The strategies for plant nutrient supply vary depending on the cultivation methods or substrate dosages employed.With the development of mechanization,wide-row spacing substrate cultivation became an optimize mode of the greenhouse cucumber cultivation,aligning with the trend of intelligent agriculture.To determine the optimal nutrient solution supply amount(NS)and supply frequency(SF)for promoting the integrated growth of cucumber under wide-row spacing substrate cultivation,we explored the effects of substrate supply amount(SS),NS,and SF on cucumber yield,quality,and element utilization efficiency.A five-level quadratic orthogonal rotation combination design with three experimental factors(NS,SF,and SS)was implemented for 23 coupling treatments over three growing seasons,including spring(2022S and 2023S)and autumn(2022A).The technique for order preference by similarity to ideal solution(TOPSIS)combining weights based on game theory was applied to construct cucumber comprehensive growth evaluation model.Single and two experimental factors analyses revealed significant effects of single factors and the coupling of NS-SS,NS-SF and SS-SF on the integrated growth of cucumber for all three growing seasons.For the NS-SF-SS combination,the optimal parameters for comprehensive cucumber growth were determined as follows:levels of^(-1).68 for NS,-0.7 for SF,and^(-1).682 for SS in 2022A;-0.43 for NS,-0.06 for SF,and 0.34 for SS in 2022S;0.3 for NS,-0.02 for SF,and 0.04 for SS in 2023S.Furthermore,for SS ranges of 2.00-3.01,3.01-4.50,4.50-5.99,5.99-7.00(L·plant^(-1)),the corresponding NS and SF intervals maximizing cucumber integrated growth in spring were:0.28-0.30(L·plant^(-1))and 6(times·d^(-1)),0.26-0.30(L·plant^(-1))and 6(times·d^(-1)),0.25-0.30(L·plant^(-1))and 6(times·d^(-1)),0.23-0.30(L·plant^(-1))and 6(times·d^(-1)),respectively.With the same SS,the corresponding NS and SF intervals that maximized cucumber integrated growth in autumn were:0.10(L·plant^(-1))and 8(times·d^(-1)),0.18(L·plant^(-1))and 7(times·d^(-1)),0.30(L·plant^(-1))and 6(times·d^(-1)),0.49(L·plant^(-1))and 5(times·d^(-1)),respectively.The results provide a theoretical basis for solution management,and further in-depth research on cucumber cultivation.展开更多
This study reported the synthesis of magnetic solid solutions V2(A_(x)B_(y)Sn_(1-x-y))C(where A and B are Mn,Fe,or Co)MAX phases.These materials were prepared by incorporating magnetic elements into the V_(2)SnC MAX p...This study reported the synthesis of magnetic solid solutions V2(A_(x)B_(y)Sn_(1-x-y))C(where A and B are Mn,Fe,or Co)MAX phases.These materials were prepared by incorporating magnetic elements into the V_(2)SnC MAX phase via pressure-less sintering at 1000℃for 3 hours.XRD analysis reveals that the composition with x=y=0.2 exhibits a shift of diffraction peaks to higher angles,indicating lattice parameter changes,and achieves the highest phase purity with the maximum solid solution limit,further increases in the dopant content led to the formation of impurities.While the solid solution of magnetic elements preserves the characteristic layered structure of the MAX phase,it successfully induces magnetic properties.The magnetic transition temperatures for these solid solutions ranges from 61 to 200 K.Specifically,V_(2)(Mn_(x)Co_(y)Sn_(1-x-y))C demonstrated hard magnetic characteristics,with a high saturation magnetization(6.536 emu/g)and large remanence(4.236 emu/g).In contrast,V_(2)(Mn_(x)Fe_(y)Sn_(1-x-y))C and V2(Fe_(x)Co_(y)Sn_(1-x-y))C exhibits soft magnetic behavior,evidenced by their narrow hysteresis loops and low coercivity.Their saturation magnetization values are 3.80 and 1.784 emu/g,respectively.The distinctly"S"-shaped hysteresis loop of V_(2)(Fe_(x)Co_(y)Sn_(1-x-y))C further confirms its soft magnetic nature.展开更多
Doping in thin-film transistors(TFTs) plays a crucial role in tailoring material properties to enhance device performance, making them essential for advanced electronic applications. This study explores the synthesis ...Doping in thin-film transistors(TFTs) plays a crucial role in tailoring material properties to enhance device performance, making them essential for advanced electronic applications. This study explores the synthesis and characterization of TFTs fabricated using nickel(Ni)-doped indium oxide(In_(2)O_(3)) via a wet-chemical approach. The presented work investigates the effect of "Ni" incorporation in In_(2)O_(3) on the structural and electrical transport properties of In_(2)O_(3), revealing that higher "Ni" content decreases the oxygen vacancies, leading to a reduction in leakage current and a forward shift in threshold potential(V_(th)).Experimental findings reveal that Ni In O-based TFTs(with Ni = 0.5%) showcase enhanced electrical performance, achieving mobility of 7.54 cm^(2)/(V·s), an impressive ON/OFF current ratio of ~10^(7), a V_(th) of 6.26 V, reduced interfacial trap states(D_(it)) of 8.23 ×10^(12) cm^(-2) and enhanced biased stress stability. The efficacy of "Ni" incorporation is attributed to the upgraded Lewis acidity, stable Ni-O bond strength, and small ionic radius of Ni. Negative bias illumination stability(NBIS) measurements further indicate that device stability diminishes with shorter light wavelengths, likely due to the activation of oxygen vacancies. These findings validate the solution-processed techniques' potential for future large-scale, low-cost, energy-efficient, and high-performance electronics.展开更多
Granite residual soil (GRS) is a type of weathering soil that can decompose upon contact with water, potentially causing geological hazards. In this study, cement, an alkaline solution, and glass fiber were used to re...Granite residual soil (GRS) is a type of weathering soil that can decompose upon contact with water, potentially causing geological hazards. In this study, cement, an alkaline solution, and glass fiber were used to reinforce GRS. The effects of cement content and SiO_(2)/Na2O ratio of the alkaline solution on the static and dynamic strengths of GRS were discussed. Microscopically, the reinforcement mechanism and coupling effect were examined using X-ray diffraction (XRD), micro-computed tomography (micro-CT), and scanning electron microscopy (SEM). The results indicated that the addition of 2% cement and an alkaline solution with an SiO_(2)/Na2O ratio of 0.5 led to the densest matrix, lowest porosity, and highest static compressive strength, which was 4994 kPa with a dynamic impact resistance of 75.4 kN after adding glass fiber. The compressive strength and dynamic impact resistance were a result of the coupling effect of cement hydration, a pozzolanic reaction of clay minerals in the GRS, and the alkali activation of clay minerals. Excessive cement addition or an excessively high SiO_(2)/Na2O ratio in the alkaline solution can have negative effects, such as the destruction of C-(A)-S-H gels by the alkaline solution and hindering the production of N-A-S-H gels. This can result in damage to the matrix of reinforced GRS, leading to a decrease in both static and dynamic strengths. This study suggests that further research is required to gain a more precise understanding of the effects of this mixture in terms of reducing our carbon footprint and optimizing its properties. The findings indicate that cement and alkaline solution are appropriate for GRS and that the reinforced GRS can be used for high-strength foundation and embankment construction. The study provides an analysis of strategies for mitigating and managing GRS slope failures, as well as enhancing roadbed performance.展开更多
The 15th Five-Year Plan will begin in 2026,amid heightened global technological competition and rapid supply chain changes.At this pivotal moment,the low-altitude economy and commercial aerospace,once seen as futurist...The 15th Five-Year Plan will begin in 2026,amid heightened global technological competition and rapid supply chain changes.At this pivotal moment,the low-altitude economy and commercial aerospace,once seen as futuristic,are quickly transitioning from strategic concepts to large-scale manufacturing industries.These sectors now drive China’s high-quality development and support a new framework for international engagement.展开更多
In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of roc...In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of rocks after stress relief introduces errors.To improve accuracy,this study proposes an in-situ stress solution theory that incorporates time-dependent stress relief effects.Triaxial stepwise loadingunloading rheological tests on granite and siltstone established quantitative relationships between instantaneous elastic recovery and viscoelastic recovery under different stress levels,confirming their impact on measurement accuracy.By integrating a dual-class elastic deformation recovery model,an improved in-situ stress solution theory was derived.Additionally,accounting for the nonlinear characteristics of rock masses,a determination method for time-dependent nonlinear mechanical parameters was proposed.Based on the CSIRO hollow inclusion strain cell,time-dependent strain correction equations and long-term confining pressure calibration equations were formulated.Finally,the proposed theory was successfully applied at one iron mine(736 m depth)in Xinjiang,China,and one coal mine(510 m depth)in Ningxia,China.Compared to classical theory,the calculated mean stress values showed accuracy improvements of 6.0%and 9.4%,respectively,validating the applicability and reliability of the proposed theory.展开更多
Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding str...Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding strength in titanium/stainless steel laminated composites were investigated.Results indicate that the hardened layer reduces the interfacial bonding strength from over 261 MPa to less than 204 MPa.During the cold roll-bonding process,the hardened layer fractures,leading to the formation of multi-scale cracks that are difficult for the stainless steel to fill.This not only hinders the development of an interlocking interface but also leads to the presence of numerous microcracks and hardened blocks along the nearly straight interface,consequently weakening the interfacial bonding strength.In metals with high work hardening rates,the conventional approach of enhancing interface interlocking and improving interfacial bonding strength by using a surface-hardened layer becomes less effective.展开更多
Generalised reduced masses with a set of equations governing the three relative motions between two of 3-bodies in their gravitational field are established,of which the dynamic characteristics of 3-body dynamics,fund...Generalised reduced masses with a set of equations governing the three relative motions between two of 3-bodies in their gravitational field are established,of which the dynamic characteristics of 3-body dynamics,fundamental bases of this paper,are revealed.Based on these findings,an equivalent system is developed,which is a 2-body system with its total mass,constant angular momentum,kinetic and potential energies same as the total ones of three relative motions,so that it can be solved using the well-known theory of the 2-body system.From the solution of an equivalent system with the revealed characteristics of three relative motions,the general theoretical solutions of the 3-body system are obtained in the curve-integration forms along the orbits in the imaged radial motion space.The possible periodical orbits with generalised Kepler’s law are presented.Following the description and mathematical demonstrations of the proposed methods,the examples including Euler’s/Lagrange’s problems,and a reported numerical one are solved to validate the proposed methods.The methods derived from the 3-body system are extended to N-body problems.展开更多
Characterization of vegetation effect on soil response is essential for comprehending site-specific hydrological processes.Traditional research often relies on sensors or remote sensing data to examine the hydrologica...Characterization of vegetation effect on soil response is essential for comprehending site-specific hydrological processes.Traditional research often relies on sensors or remote sensing data to examine the hydrological properties of vegetation zones,yet these methods are limited by either measurement sparsity or spatial inaccuracy.Therefore,this paper is the first to propose a data-driven approach that incorporates high-temporal-resolution electrical resistivity tomography(ERT)to quantify soil hydrological response.Time-lapse ERT is deployed on a vegetated slope site in Foshan,China,during a discontinuous rainfall induced by Typhoon Haikui.A total of 97 ERT measurements were collected with an average time interval of 2.7 hours.The Gaussian Mixture Model(GMM)is applied to quantify the level of response and objectively classify impact zones based on features extracted directly from the ERT data.The resistivity-moisture content correlation is established based on on-site sensor data to characterize infiltration and evapotranspiration across wet-dry conditions.The findings are compared with the Normalized Difference Vegetation Index(NDVI),a common indicator for vegetation quantification,to reveal potential spatial errors in remote sensing data.In addition,this study provides discussions on the potential applications and future directions.This paper showcases significant spatio-temporal advantages over existing studies,providing a more detailed and accurate characterization of superficial soil hydrological response.展开更多
The corrosion and leaching behaviors of Sn-0.75Cu solders and joints in NaCl-Na2SO4 and NaCl-Na2SO4-Na2CO3 simulated soil solutions were investigated compared with those in NaCl solution, aiming to assess the potentia...The corrosion and leaching behaviors of Sn-0.75Cu solders and joints in NaCl-Na2SO4 and NaCl-Na2SO4-Na2CO3 simulated soil solutions were investigated compared with those in NaCl solution, aiming to assess the potential risk from the electronic-waste disposed in soil. The leaching kinetics of Sn reveals that the leaching amount of Sn increases with increasing the time. The amount of Sn leached from the joint is the largest in NaCl solution.SO4^2- and CO3^2- inhibit the leaching of Sn from the joints, but accelerate that from the solders. Meanwhile, the corrosion layer of the joint in NaCl solution is more porous, and those immersed in NaCl-Na2SO4 and NaCl-Na2SO4-Na2CO3 solutions are compact. The XRD results indicate that the main corrosion products on the solders and joints surfaces are comprised of tin oxide, tin chloride and tin chloride hydroxide. The potentiodynamic polarization measurements for the solders were discussed in the simulated soil solutions.展开更多
A surface soil moisture model with improved spatial resolution was developed using remotely sensed apparent thermal inertia（ATI）.The model integrates the surface temperature derived from TM/ETM＋ image and the mean ...A surface soil moisture model with improved spatial resolution was developed using remotely sensed apparent thermal inertia（ATI）.The model integrates the surface temperature derived from TM/ETM＋ image and the mean surface temperature from MODIS images to improve the spatial resolution of soil temperature difference based on the heat conduction equation,which is necessary to calculate the ATI.Consequently,the spatial resolution of ATI and SMC can be enhanced from 1 km to 120 m（TM） or 60m（ETM＋）.Moreover,the enhanced ATI has a much stronger correlation coefficient（R^2） with SMC（0.789） than the surface reflectance（0.108） or the ATI derived only from MODIS images（0.264）.Based on the regression statistics of the field SMC measurement and enhanced ATI,a linear regression model with an RMS error of 1.90%was found.展开更多
[Objective] The aim was to study the effect of salt solution on characteristics of soil infiltration, and to provide references for the further studies on the effect of water quality on soil infiltration characteristi...[Objective] The aim was to study the effect of salt solution on characteristics of soil infiltration, and to provide references for the further studies on the effect of water quality on soil infiltration characteristics and its mechanism. [Method] With the NaCl, CaCl2 solutions as the main test materials, the effect of different water quality and salt solution concentration on soil infiltration was studied under one-dimensional vertical ponded water infiltration at laboratory. [Result] The solution concentration could affect the infiltration performance. The trends of the infiltration rates, cumulative infiltrations and wetting front migration distances were all 50 mg/L 100 mg/L 10 mg/L. At the same concentration, the effect of NaCl solution on soil infiltration characteristics was more significant than CaCl2 solution： in the same time, cumulative infiltration and wetting front migration distance of NaCl solution were greater than CaCl2 solution; compared with NaCl solution, CaCl2 solution took longer time to infiltrate the same amount of water. The dynamic changes of infiltration rate, wetting front and cumulative infiltration were well fitted to the Philip model. [Conclusion] This study only conducted indoor experiment to the infiltration of salt solutions, involving in low concentration and small range. Although it provided some references for the study on the effect of water quality on soil infiltration characteristics and its mechanism, studies in larger areas and with bigger concentrations are demanding.展开更多
基金Project supported by the National Natural Science Foundation of China (No. 49901009).
文摘Effects of NHj concentiation, solution/soil ratio and temperature on NH_4^+adsorption were studied in a Eum-Orthic Anthrosol. The slopes of the soil NH_4^+ adsorptionisotherms and the fitted n, the coefficient for the adsorption intensity, and kappa, the coefficientrelated to adsorption capacity, of the Freundlich equation increased with increasing solution/soilratio (SSR) and with decreasing temperature (T). For the range of experimental conditions, the valueof delta q/delta c, the rate of change of the amount of NH_4^+ adsorbed in the soil solid phase (q)with respect to the equilibrium concentration of NH_4^+ in soil solution (c), was 0.840, indicatingthat q increased with increasing c. From 2 to 45 deg C, delta q/delta SSR, the rate of change of qwith respect to SSR, decreased from 2.598 to 1.996, showing that q increased with increasing SSR,while its increasing rate decreased with temperature. From SSR 1:1 to 20:1, delta q/delta T, therate of change of q with respect to T, decreased from -- 0.095 to -- 0.361, indicating that qdecreased with increasing temperature, and at the same time the negative effect of temperaturebecame larger as SSR increased. Thus under the experimental conditions the order of importance indetermining the amount of NH_4^+ adsorbed in the soil solid phase was delta q/delta SSR > deltaq/delta c > |delta q/delta T|, indicating that the greatest effect on the amount of NH_4^+ adsorbedwas with the solution/soil ratio; the equilibrium concentration of NH_4^+ had a lesser effect; andtemperature had the least effect.
基金Supported by the Doctoral Research Start-up Project of Yuncheng University(YQ-2023067)Project of Shanxi Natural Science Foundation(202303021211189)+1 种基金Fund Program for the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Provinces(20220036)Shanxi ProvinceIntelligent Optoelectronic Sensing Application Technology Innovation Center and Shanxi Province Optoelectronic Information Science and TechnologyLaboratory,Yuncheng University.
文摘In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.
基金Supported by National Natural Science Foundation of China(Grant No.62173161).
文摘Let A be a 3×3 singular or diagonalizable matrix,all solutions to the Yang-Baxter-like matrix equation have been determined.However,finding all solutions for full rank,non-diagonalizable matrices remains challenging.By utilizing classification techniques,we establish all solutions of the Yang-Baxter-like matrix equation in this paper when the coefficient matrix A is similar to non-diagonalizable matrix diag(λ,J_(2)(λ))withλ̸=0.More specifically,we divide the non-diagonal elements of the solution into 10 different cases.By discussing each situation,we establish all solutions of the Yang-Baxter-like matrix equation.The results of this work enrich the existing ones.
基金supported by the National Natural Science Foundation of China(12401279,12371219)the Academic and Technical Leaders Training Plan of Jiangxi Province(20212BCJ23027).
文摘This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic field is assumed to satisfy the Neumann boundary condition,which was first investigated by Kazhikhov in 1987.We establish the global existence of the unique strong solutions to the MHD equations without any smallness conditions on the initial data.More precisely,our result can be regarded as a natural generalization of Kazhikov’s result for applying the constant heat-conductivity in bounded domains to the degenerate case in unbounded domains.
基金Supported by the National Natural Science Foundation of China(Grant Nos.12361040,12061064)the National Science Foundation of Gansu Province(Grant No.22JR5RA264)State Scholarship Fund(Grant No.20230862021).
文摘In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→∞)x′(t)e^(t)=0,where t_(0) and ψ_(0) are real constants,φ(s)=s/√1−s^(2),s∈R with s∈(−1,1),f:[t_(0),∞)×R→R satisfies the Lipschitz or Osgood-type conditions.
文摘Ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry(FT-ICR MS)is an advanced instrument capable of separating and determining molecular mass-to-charge ratios with sub-ppm level accuracy.A typical FT-ICR MS spectrogram can identify hundreds to thousands of formulas in a complex sample.This perspective briefly examines the application of FT-ICR MS to soil organic matter and plant biomass studies,highlighting their significant contributions to sustainable agriculture and environment.
文摘Circumlunar abort trajectories constitute a vital contingency return strategy during the translunar phase of crewed lunar missions.This paper proposes a methodology for constructing the solution set of the circumlunar abort trajectory and leverages its advantageous properties to address the optimization design problem of abort trajectories.Initially,a solution set of all feasible abort trajectories,originating from an abort point on the nominal trajectory and complying with fundamental reentry constraints,is formulated through the introduction of two novel design parameters.Subsequently,the geometric characteristics of the solution set,as well as the distributional properties of key iterative constraint responses,including flight time and velocity increment,are analyzed.Finally,the characteristics exhibited in the solution set are employed to directly identify the design parameters of the abort trajectories with minimum flight time and velocity increment,thereby providing solutions to two distinct types of optimization problems.The simulation results for a variety of nominal trajectories,encompassing the reconstruction and redesign of the Apollo13 abort trajectory,validate the proposed method,demonstrating its ability to directly generate optimal abort trajectories.The method proposed in this paper investigates feasible abort trajectories from a global perspective,providing both a framework and convenience for mission planning and iterative optimization in abort trajectory design.
基金supported by the National Natural Science Foundation of China(No.41941018)Shanghai Gaofeng Discipline Construction Funding.
文摘Strong seismic excitation and fault dislocation are likely to occur simultaneously in high-intensity seismic zones,causing severe damage to tunnels crossing active fault zones.This paper aims to develop a novel analytical solution to determine the longitudinal mechanical responses of tunnels subjected to the combined effects of seismic waves and strike-slip faulting.Adopting the elastic springbeam model,the seismic waves are modelled as shear horizontal(SH)waves and the fault dislocation follows an S-shaped pattern;the superposition principle for free-fielddisplacements caused by both effects is assumed.In addition,the transmission and reflectionof seismic waves at the fault-rock geological interface and the tangential contact conditions at the tunnel-rock interface are considered.The analytical model is validated against numerical simulations,confirmingits accuracy in calculating tunnel responses.Moreover,a parametric study is conducted to evaluate the impact of key factors,including fault displacement,fault zone width,fault dip angle,earthquake frequency,rock conditions,tunnel lining stiffness,and tangential contact conditions,on tunnel responses.Compared with each effect alone,the combined effects of seismic waves and strike-slip faulting significantlychange the tunnel deformation and internal forces,leading to increased tunnel responses,especially within the fault zone and near the fault-rock interfaces.Depending on specificparameters,tunnel responses can be classifiedinto seismic-dominated,faulting-dominated,and seismic-faulting coupled responses on the basis of the relative contributions of each effect.The proposed analytical solution can be applied to quickly predict the longitudinal mechanical behaviour of tunnels under such combined effects in engineering applications.
基金supported by the China Agriculture Research System(Grant No.CARS-23-D06)the Key Research and Development Program of Shaanxi Province(Grant Nos.2024NC2-GJHX-29 and 2024NC-ZDCYL-05-08)Shaanxi Agricultural Collaborative Innovation and Extension Alliance Project(Grant No.LMZD202202).
文摘Substrate and nutrient supply are essential for vegetable cultivation in greenhouse.The strategies for plant nutrient supply vary depending on the cultivation methods or substrate dosages employed.With the development of mechanization,wide-row spacing substrate cultivation became an optimize mode of the greenhouse cucumber cultivation,aligning with the trend of intelligent agriculture.To determine the optimal nutrient solution supply amount(NS)and supply frequency(SF)for promoting the integrated growth of cucumber under wide-row spacing substrate cultivation,we explored the effects of substrate supply amount(SS),NS,and SF on cucumber yield,quality,and element utilization efficiency.A five-level quadratic orthogonal rotation combination design with three experimental factors(NS,SF,and SS)was implemented for 23 coupling treatments over three growing seasons,including spring(2022S and 2023S)and autumn(2022A).The technique for order preference by similarity to ideal solution(TOPSIS)combining weights based on game theory was applied to construct cucumber comprehensive growth evaluation model.Single and two experimental factors analyses revealed significant effects of single factors and the coupling of NS-SS,NS-SF and SS-SF on the integrated growth of cucumber for all three growing seasons.For the NS-SF-SS combination,the optimal parameters for comprehensive cucumber growth were determined as follows:levels of^(-1).68 for NS,-0.7 for SF,and^(-1).682 for SS in 2022A;-0.43 for NS,-0.06 for SF,and 0.34 for SS in 2022S;0.3 for NS,-0.02 for SF,and 0.04 for SS in 2023S.Furthermore,for SS ranges of 2.00-3.01,3.01-4.50,4.50-5.99,5.99-7.00(L·plant^(-1)),the corresponding NS and SF intervals maximizing cucumber integrated growth in spring were:0.28-0.30(L·plant^(-1))and 6(times·d^(-1)),0.26-0.30(L·plant^(-1))and 6(times·d^(-1)),0.25-0.30(L·plant^(-1))and 6(times·d^(-1)),0.23-0.30(L·plant^(-1))and 6(times·d^(-1)),respectively.With the same SS,the corresponding NS and SF intervals that maximized cucumber integrated growth in autumn were:0.10(L·plant^(-1))and 8(times·d^(-1)),0.18(L·plant^(-1))and 7(times·d^(-1)),0.30(L·plant^(-1))and 6(times·d^(-1)),0.49(L·plant^(-1))and 5(times·d^(-1)),respectively.The results provide a theoretical basis for solution management,and further in-depth research on cucumber cultivation.
基金Funded by the National Natural Science Foundation for Young Scholars of China(No.51302073)the Hubei Provincial Key Laboratory of Green Materials for Light Industry,Hubei University of Technology(No.202509B13)。
文摘This study reported the synthesis of magnetic solid solutions V2(A_(x)B_(y)Sn_(1-x-y))C(where A and B are Mn,Fe,or Co)MAX phases.These materials were prepared by incorporating magnetic elements into the V_(2)SnC MAX phase via pressure-less sintering at 1000℃for 3 hours.XRD analysis reveals that the composition with x=y=0.2 exhibits a shift of diffraction peaks to higher angles,indicating lattice parameter changes,and achieves the highest phase purity with the maximum solid solution limit,further increases in the dopant content led to the formation of impurities.While the solid solution of magnetic elements preserves the characteristic layered structure of the MAX phase,it successfully induces magnetic properties.The magnetic transition temperatures for these solid solutions ranges from 61 to 200 K.Specifically,V_(2)(Mn_(x)Co_(y)Sn_(1-x-y))C demonstrated hard magnetic characteristics,with a high saturation magnetization(6.536 emu/g)and large remanence(4.236 emu/g).In contrast,V_(2)(Mn_(x)Fe_(y)Sn_(1-x-y))C and V2(Fe_(x)Co_(y)Sn_(1-x-y))C exhibits soft magnetic behavior,evidenced by their narrow hysteresis loops and low coercivity.Their saturation magnetization values are 3.80 and 1.784 emu/g,respectively.The distinctly"S"-shaped hysteresis loop of V_(2)(Fe_(x)Co_(y)Sn_(1-x-y))C further confirms its soft magnetic nature.
基金funded by the research startup funding of National Research Foundation (NRF) of Korea through the Ministry of Science and ICT 2022R1G1A1009887Part of this study was supported by research start-up funding of Anhui University (S202418001/078)。
文摘Doping in thin-film transistors(TFTs) plays a crucial role in tailoring material properties to enhance device performance, making them essential for advanced electronic applications. This study explores the synthesis and characterization of TFTs fabricated using nickel(Ni)-doped indium oxide(In_(2)O_(3)) via a wet-chemical approach. The presented work investigates the effect of "Ni" incorporation in In_(2)O_(3) on the structural and electrical transport properties of In_(2)O_(3), revealing that higher "Ni" content decreases the oxygen vacancies, leading to a reduction in leakage current and a forward shift in threshold potential(V_(th)).Experimental findings reveal that Ni In O-based TFTs(with Ni = 0.5%) showcase enhanced electrical performance, achieving mobility of 7.54 cm^(2)/(V·s), an impressive ON/OFF current ratio of ~10^(7), a V_(th) of 6.26 V, reduced interfacial trap states(D_(it)) of 8.23 ×10^(12) cm^(-2) and enhanced biased stress stability. The efficacy of "Ni" incorporation is attributed to the upgraded Lewis acidity, stable Ni-O bond strength, and small ionic radius of Ni. Negative bias illumination stability(NBIS) measurements further indicate that device stability diminishes with shorter light wavelengths, likely due to the activation of oxygen vacancies. These findings validate the solution-processed techniques' potential for future large-scale, low-cost, energy-efficient, and high-performance electronics.
基金the support provided by the National Natural Science Foundation of China(Grant Nos.52278336 and 42302032)Guangdong Basic and Applied Research Foundation(Grant Nos.2023B1515020061).
文摘Granite residual soil (GRS) is a type of weathering soil that can decompose upon contact with water, potentially causing geological hazards. In this study, cement, an alkaline solution, and glass fiber were used to reinforce GRS. The effects of cement content and SiO_(2)/Na2O ratio of the alkaline solution on the static and dynamic strengths of GRS were discussed. Microscopically, the reinforcement mechanism and coupling effect were examined using X-ray diffraction (XRD), micro-computed tomography (micro-CT), and scanning electron microscopy (SEM). The results indicated that the addition of 2% cement and an alkaline solution with an SiO_(2)/Na2O ratio of 0.5 led to the densest matrix, lowest porosity, and highest static compressive strength, which was 4994 kPa with a dynamic impact resistance of 75.4 kN after adding glass fiber. The compressive strength and dynamic impact resistance were a result of the coupling effect of cement hydration, a pozzolanic reaction of clay minerals in the GRS, and the alkali activation of clay minerals. Excessive cement addition or an excessively high SiO_(2)/Na2O ratio in the alkaline solution can have negative effects, such as the destruction of C-(A)-S-H gels by the alkaline solution and hindering the production of N-A-S-H gels. This can result in damage to the matrix of reinforced GRS, leading to a decrease in both static and dynamic strengths. This study suggests that further research is required to gain a more precise understanding of the effects of this mixture in terms of reducing our carbon footprint and optimizing its properties. The findings indicate that cement and alkaline solution are appropriate for GRS and that the reinforced GRS can be used for high-strength foundation and embankment construction. The study provides an analysis of strategies for mitigating and managing GRS slope failures, as well as enhancing roadbed performance.
文摘The 15th Five-Year Plan will begin in 2026,amid heightened global technological competition and rapid supply chain changes.At this pivotal moment,the low-altitude economy and commercial aerospace,once seen as futuristic,are quickly transitioning from strategic concepts to large-scale manufacturing industries.These sectors now drive China’s high-quality development and support a new framework for international engagement.
基金supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China(No.2024ZD1700201)the National Natural Science Foundation of China(Nos.U2034206,51974014 and 51574014)+1 种基金the Guangdong Basic and Applied Basic Research Foundation(No.2024A1515011631)the National Key Research and Development Project of China(No.2022YFC3004601)。
文摘In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of rocks after stress relief introduces errors.To improve accuracy,this study proposes an in-situ stress solution theory that incorporates time-dependent stress relief effects.Triaxial stepwise loadingunloading rheological tests on granite and siltstone established quantitative relationships between instantaneous elastic recovery and viscoelastic recovery under different stress levels,confirming their impact on measurement accuracy.By integrating a dual-class elastic deformation recovery model,an improved in-situ stress solution theory was derived.Additionally,accounting for the nonlinear characteristics of rock masses,a determination method for time-dependent nonlinear mechanical parameters was proposed.Based on the CSIRO hollow inclusion strain cell,time-dependent strain correction equations and long-term confining pressure calibration equations were formulated.Finally,the proposed theory was successfully applied at one iron mine(736 m depth)in Xinjiang,China,and one coal mine(510 m depth)in Ningxia,China.Compared to classical theory,the calculated mean stress values showed accuracy improvements of 6.0%and 9.4%,respectively,validating the applicability and reliability of the proposed theory.
基金supported by the National Key R&D Program of China (No. 2018YFA0707300)the National Natural Science Foundation of China (No. 52374376)the Introduction Plan for High end Foreign Experts, China (No. G2023105001L)。
文摘Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding strength in titanium/stainless steel laminated composites were investigated.Results indicate that the hardened layer reduces the interfacial bonding strength from over 261 MPa to less than 204 MPa.During the cold roll-bonding process,the hardened layer fractures,leading to the formation of multi-scale cracks that are difficult for the stainless steel to fill.This not only hinders the development of an interlocking interface but also leads to the presence of numerous microcracks and hardened blocks along the nearly straight interface,consequently weakening the interfacial bonding strength.In metals with high work hardening rates,the conventional approach of enhancing interface interlocking and improving interfacial bonding strength by using a surface-hardened layer becomes less effective.
文摘Generalised reduced masses with a set of equations governing the three relative motions between two of 3-bodies in their gravitational field are established,of which the dynamic characteristics of 3-body dynamics,fundamental bases of this paper,are revealed.Based on these findings,an equivalent system is developed,which is a 2-body system with its total mass,constant angular momentum,kinetic and potential energies same as the total ones of three relative motions,so that it can be solved using the well-known theory of the 2-body system.From the solution of an equivalent system with the revealed characteristics of three relative motions,the general theoretical solutions of the 3-body system are obtained in the curve-integration forms along the orbits in the imaged radial motion space.The possible periodical orbits with generalised Kepler’s law are presented.Following the description and mathematical demonstrations of the proposed methods,the examples including Euler’s/Lagrange’s problems,and a reported numerical one are solved to validate the proposed methods.The methods derived from the 3-body system are extended to N-body problems.
基金support from the National Key R&D Program of China(2021YFC3001003)Guangdong Provincial Department of Science and Technology(2022A0505030019)Science and Technology Development Fund,Macao SAR(File nos.0056/2023/RIB2,001/2024/SKL).
文摘Characterization of vegetation effect on soil response is essential for comprehending site-specific hydrological processes.Traditional research often relies on sensors or remote sensing data to examine the hydrological properties of vegetation zones,yet these methods are limited by either measurement sparsity or spatial inaccuracy.Therefore,this paper is the first to propose a data-driven approach that incorporates high-temporal-resolution electrical resistivity tomography(ERT)to quantify soil hydrological response.Time-lapse ERT is deployed on a vegetated slope site in Foshan,China,during a discontinuous rainfall induced by Typhoon Haikui.A total of 97 ERT measurements were collected with an average time interval of 2.7 hours.The Gaussian Mixture Model(GMM)is applied to quantify the level of response and objectively classify impact zones based on features extracted directly from the ERT data.The resistivity-moisture content correlation is established based on on-site sensor data to characterize infiltration and evapotranspiration across wet-dry conditions.The findings are compared with the Normalized Difference Vegetation Index(NDVI),a common indicator for vegetation quantification,to reveal potential spatial errors in remote sensing data.In addition,this study provides discussions on the potential applications and future directions.This paper showcases significant spatio-temporal advantages over existing studies,providing a more detailed and accurate characterization of superficial soil hydrological response.
基金Project(2012FY113000)supported by the National Science and Technology Basic Project of the Ministry of Science and Technology of ChinaProjects(51171037+2 种基金5113401351101024)supported by the National Natural Science Foundation of ChinaProject(14B430009)supported by the Science Research Fund of Education Department of Henan Province,China
文摘The corrosion and leaching behaviors of Sn-0.75Cu solders and joints in NaCl-Na2SO4 and NaCl-Na2SO4-Na2CO3 simulated soil solutions were investigated compared with those in NaCl solution, aiming to assess the potential risk from the electronic-waste disposed in soil. The leaching kinetics of Sn reveals that the leaching amount of Sn increases with increasing the time. The amount of Sn leached from the joint is the largest in NaCl solution.SO4^2- and CO3^2- inhibit the leaching of Sn from the joints, but accelerate that from the solders. Meanwhile, the corrosion layer of the joint in NaCl solution is more porous, and those immersed in NaCl-Na2SO4 and NaCl-Na2SO4-Na2CO3 solutions are compact. The XRD results indicate that the main corrosion products on the solders and joints surfaces are comprised of tin oxide, tin chloride and tin chloride hydroxide. The potentiodynamic polarization measurements for the solders were discussed in the simulated soil solutions.
基金Project (2013CB227904) supported by the National Basic Research Program of ChinaProject (2012QNB09) supported by the Fundamental Research Funds for the Central University,ChinaProject (NCET-12-0956) supported by the Program for New Century Excellent Talents
文摘A surface soil moisture model with improved spatial resolution was developed using remotely sensed apparent thermal inertia（ATI）.The model integrates the surface temperature derived from TM/ETM＋ image and the mean surface temperature from MODIS images to improve the spatial resolution of soil temperature difference based on the heat conduction equation,which is necessary to calculate the ATI.Consequently,the spatial resolution of ATI and SMC can be enhanced from 1 km to 120 m（TM） or 60m（ETM＋）.Moreover,the enhanced ATI has a much stronger correlation coefficient（R^2） with SMC（0.789） than the surface reflectance（0.108） or the ATI derived only from MODIS images（0.264）.Based on the regression statistics of the field SMC measurement and enhanced ATI,a linear regression model with an RMS error of 1.90%was found.
基金Supported by the National Natural Science Foundation of China(40801100,50179035,50609022)the State Key Laboratory Fund Project of Soil Erosion and Dryland Faming on Loess Plateau(10501-177,10501-220)+1 种基金the Discipline Construction Fund of Ludong Universitythe Open Fund for Key Laboratory of Soil,Water and Environmental Conservation in Shandong Province(STKF201011)~~
文摘[Objective] The aim was to study the effect of salt solution on characteristics of soil infiltration, and to provide references for the further studies on the effect of water quality on soil infiltration characteristics and its mechanism. [Method] With the NaCl, CaCl2 solutions as the main test materials, the effect of different water quality and salt solution concentration on soil infiltration was studied under one-dimensional vertical ponded water infiltration at laboratory. [Result] The solution concentration could affect the infiltration performance. The trends of the infiltration rates, cumulative infiltrations and wetting front migration distances were all 50 mg/L 100 mg/L 10 mg/L. At the same concentration, the effect of NaCl solution on soil infiltration characteristics was more significant than CaCl2 solution： in the same time, cumulative infiltration and wetting front migration distance of NaCl solution were greater than CaCl2 solution; compared with NaCl solution, CaCl2 solution took longer time to infiltrate the same amount of water. The dynamic changes of infiltration rate, wetting front and cumulative infiltration were well fitted to the Philip model. [Conclusion] This study only conducted indoor experiment to the infiltration of salt solutions, involving in low concentration and small range. Although it provided some references for the study on the effect of water quality on soil infiltration characteristics and its mechanism, studies in larger areas and with bigger concentrations are demanding.
