Municipal solid waste generation is strongly linked to rising human population and expanding urban areas, with significant implications on urban metabolism as well as space and place values redefinition. Effective man...Municipal solid waste generation is strongly linked to rising human population and expanding urban areas, with significant implications on urban metabolism as well as space and place values redefinition. Effective management performance of municipal solid waste management underscores the interdisciplinarity strategies. Such knowledge and skills are paramount to uncover the sources of waste generation as well as means of waste storage, collection, recycling, transportation, handling/treatment, disposal, and monitoring. This study was conducted in Dar es Salaam city. Driven by the curiosity model of the solid waste minimization performance at source, study data was collected using focus group discussion techniques to ward-level local government officers, which was triangulated with literature and documentary review. The main themes of the FGD were situational factors (SFA) and local government by-laws (LGBY). In the FGD session, sub-themes of SFA tricked to understand how MSW minimization is related to the presence and effect of services such as land use planning, availability of landfills, solid waste transfer stations, material recovery facilities, incinerators, solid waste collection bins, solid waste trucks, solid waste management budget and solid waste collection agents. Similarly, FGD on LGBY was extended by sub-themes such as contents of the by-law, community awareness of the by-law, and by-law enforcement mechanisms. While data preparation applied an analytical hierarchy process, data analysis applied an ordinary least square (OLS) regression model for sub-criteria that explain SFA and LGBY;and OLS standard residues as variables into geographically weighted regression with a resolution of 241 × 241 meter in ArcMap v10.5. Results showed that situational factors and local government by-laws have a strong relationship with the rate of minimizing solid waste dumping in water bodies (local R square = 0.94).展开更多
In this manuscript,we propose an analytical equivalent linear viscoelastic constitutive model for fiber-reinforced composites,bypassing general computational homogenization.The method is based on the reduced-order hom...In this manuscript,we propose an analytical equivalent linear viscoelastic constitutive model for fiber-reinforced composites,bypassing general computational homogenization.The method is based on the reduced-order homogenization(ROH)approach.The ROH method typically involves solving multiple finite element problems under periodic conditions to evaluate elastic strain and eigenstrain influence functions in an‘off-line’stage,which offers substantial cost savings compared to direct computational homogenization methods.Due to the unique structure of the fibrous unit cell,“off-line”stage calculation can be eliminated by influence functions obtained analytically.Introducing the standard solid model to the ROH method enables the creation of a comprehensive analytical homogeneous viscoelastic constitutive model.This method treats fibrous composite materials as homogeneous,anisotropic viscoelastic materials,significantly reducing computational time due to its analytical nature.This approach also enables precise determination of a homogenized anisotropic relaxation modulus and accurate capture of various viscoelastic responses under different loading conditions.Three sets of numerical examples,including unit cell tests,three-point beam bending tests,and torsion tests,are given to demonstrate the predictive performance of the homogenized viscoelastic model.Furthermore,the model is validated against experimental measurements,confirming its accuracy and reliability.展开更多
In the verification of wire electrical discharge machining （EDM）, the motion and the performance of the wire-EDM system are analyzed. The maximum inclining angle of the wire is calculated. The relevant judgment meth...In the verification of wire electrical discharge machining （EDM）, the motion and the performance of the wire-EDM system are analyzed. The maximum inclining angle of the wire is calculated. The relevant judgment methods are used for the collision between the wire, the fixture, and the machining table. In the wire-EDM simulation, the generated solid model can he used to investigate programming results and to check the machining accuracy. The generation algorithm for the solid model in the simulation is solved based on Boolean operations. The wire swept volume for each cutting step is united to form the entire wire swept volume. Through Boolean subtraction between the stock model and the entire wire swept volume, the solid model in the wire-EDM simulation is generated. The method is also suitable for the wire path intersection occurred in cutting cone-shaped models. Finally, experiments are given to prove the method.展开更多
Taking hundreds of pieces of hazardous geological maps （1 ： 10 000） of Three Gorges res-ervoir area （3GR） as background, we establish regional three-dimensional （3D） geo-hazard modelusing DEM （digital elevatio...Taking hundreds of pieces of hazardous geological maps （1 ： 10 000） of Three Gorges res-ervoir area （3GR） as background, we establish regional three-dimensional （3D） geo-hazard modelusing DEM （digital elevation model） superposed surface images and geo-hazards elements. Based on landslides and other geo-hazard survey data,using improved B-REP（boundary representa-tion）entity data structure （two-body 3D data structure）, we set up 3D solid models for each hazardous bodies in each hazardous geological maps. Then we integrate the two types of 3D models with different scales from area to point, which are the regional geo-hazard 3D model and the solid models of each disaster body, in order to provide a visual processing and analysis plat-form for danger partition, stability evaluation, disaster prevention and control, early warning and command.展开更多
SUMMARY： Realizing the potential of geothermal energy as a cheap, green, sustainable resource to provide for the planet＇s future energy demands that a key geophysical problem be solved first： how to develop and mai...SUMMARY： Realizing the potential of geothermal energy as a cheap, green, sustainable resource to provide for the planet＇s future energy demands that a key geophysical problem be solved first： how to develop and maintain a network of multiple fluid flow pathways for the time required to deplete the heat within a given region. We present the key components for micro-scale particle-based numerical modeling of hydraulic fracture, and fluid and heat flow in geothermal reservoirs. They are based on the latest developments of ESyS-Particle--the coupling of the lattice sofid model （LSM） to simulate the nonlinear dynamics of complex solids with the lattice Boltzmann method （LBM） applied to the nonlinear dynamics of coupled fluid and heat flow in the complex solid-fluid system. The coupled LSM/LBM can be used to simulate development of fracture systems in discontinuous media, elastic stress release, fluid injection and the consequent slip at joint surfaces, and hydraulic fractur- ing; heat exchange between hot rocks and water within flow pathways created through hydraulic fracturing; and fluid flow through complex, narrow, compact and gouge- or powder-f＇flled fracture and joint systems. We demonstrate the coupled LSM/LBM to simulate the fundamental processes listed above, which are all components for the generation and sustainability of the hot-fractured rock geothermal energy fracture systems required to exploit this new green-energy resource.展开更多
In this paper we propose a method to model flowers of solid shape. Based on (Ijiri et al., 2005)’s method, we separate individual flower modeling and inflorescence modeling procedures into structure and geometry mode...In this paper we propose a method to model flowers of solid shape. Based on (Ijiri et al., 2005)’s method, we separate individual flower modeling and inflorescence modeling procedures into structure and geometry modeling. We incorporate interactive editing gestures to allow the user to edit structure parameters freely onto structure diagram. Furthermore, we use free-hand sketching techniques to allow users to create and edit 3D geometrical elements freely and easily. The final step is to automatically merge all independent 3D geometrical elements into a single waterproof mesh. Our experiments show that this solid modeling approach is promising. Using our approach, novice users can create vivid flower models easily and freely. The generated flower model is waterproof. It can have applications in visualization, animation, gaming, and toys and decorations if printed out on 3D rapid prototyping devices.展开更多
In allusion to the deficient feature of product information in conceptualdesign, a framework of deficient information modeling for conceptual shape design is put forward,which includes qualitative shape modeling (a qu...In allusion to the deficient feature of product information in conceptualdesign, a framework of deficient information modeling for conceptual shape design is put forward,which includes qualitative shape modeling (a qualitative solid model), uncertain shape modeling (anuncertain relation model) and imprecise shape modeling (an imprecise region model). In theframework, the qualitative solid model is the core, which represents qualitatively (using symbols)the conceptual shapes of mechanical products. The uncertain relation model regarding domainrelations as objects and the imprecise region model regarding domains as objects are used to dealwith the uncertain and imprecise issues respectively, which arise from qualitative shape modeling orexist in product information itself.展开更多
Swept volume solid modeling has been applied to many areas such as NC machining simulation and verification, robot workspace analysis, collision detection, and CAD. But self-intersections continue to be a challenging ...Swept volume solid modeling has been applied to many areas such as NC machining simulation and verification, robot workspace analysis, collision detection, and CAD. But self-intersections continue to be a challenging problem in the boundary representation of swept volume solids. A novel algorithm is presented in this paper to trim self-intersection regions in swept volume solids modeling. This trimming algorithm consists of two major steps: (1) roughly detecting self-intersection regions by checking intersections or overlapping of the envelop profiles; (2) splitting the whole envelop surfaces of the swept volume solid into separate non-self-intersecting patches to trim global self-intersections, and to trim local self-intersections, dividing local self-intersecting regions into patches and replacing self-intersecting patches with non-self-intersecting ones. Examples show that our algorithm is efficient and robust.展开更多
In order to alleviate unstable factor-caused bifurcation and reduce oscillations in traffic flow,a feedback control with consideration of time delay is designed for the solid angle model(SAM).The stability and bifurca...In order to alleviate unstable factor-caused bifurcation and reduce oscillations in traffic flow,a feedback control with consideration of time delay is designed for the solid angle model(SAM).The stability and bifurcation condition of the new SAM is derived through linear analysis and bifurcation analysis,and then accurate range of stable region is obtained.In order to explore the mechanism of the influence of multiple parameter combinations on the stability of controlled systems,a definite integral stabilization method is provided to determine the stable interval of time delay and feedback gain.Numerical simulations are explored to verify the feasibility and effectiveness of the proposed model,which also demonstrate that feedback gain and delay are two key factors to alleviate traffic congestion in the SAM.展开更多
An automatic generation method of geological cross-sections in dredging engineering based on 3D geological solid models is presented.The 3D geological models are built applying the non-uniform rational B-splines(NURBS...An automatic generation method of geological cross-sections in dredging engineering based on 3D geological solid models is presented.The 3D geological models are built applying the non-uniform rational B-splines(NURBS) technique,and a 2D profile can be calculated and generated automatically through Boolean operation to meet the demands of dredging projects.Moreover,an automatic marking method for geological attributes is put forward based on database technology,and the geological attributes include the profile name,scale,horizontal and vertical relative coordinates,geological lithology,and 2D standard lithology legend.At the same time,the automatic marking method can also provide an interactive mode for geological engineers to edit and modify the profile in the modeling system.Practical engineering applications show that the automatic generation method is a simple,flexible,fast and precise visual graphics rendering process that can create 2D standard profiles automatically and efficiently.This method also provides a convenient support tool for geological engineering digital analysis.展开更多
It is significant for establishing gravity datum to construct precise gravity solid tidal model,A simple method with relatively low performance is to interpolate tidal parameters from the global gravity solid tide mod...It is significant for establishing gravity datum to construct precise gravity solid tidal model,A simple method with relatively low performance is to interpolate tidal parameters from the global gravity solid tide models.A competitive approach is to determine local gravity solid tidal model by harmonic analysis using long-time serial gravity observations.In this paper a new high-precision gravity solid tidal model for Precision Gravity Measurement Facility is estimated from two co-site gravimeters in the cave laboratory using modern international standard data processing techniques,whose accuracy is evaluated further by comparing with previous publications.The results show that:(1)the determined gravity solid tidal models from two co-site gravimeters are in good agreement with each other,of which the maximum differences for amplitude factors and phase delays don’t exceed 0.01700%and 2.50990°,respectively.(2)the performance of the obtained gravity solid tidal model is 0.00411 for amplitude factors and 0.24120°for phase delays,which is a little better than that of previous publications using superconducting gravity data from Wuhan station.(3)our results and methods are corrective and effective.(4)our model is tiny different from that provided by Wuhan station,which implies that it is necessary to construct a gravity solid tidal model for Precision Gravity Measurement Facility,rather than just adopting existing models at Wuhan station.Our results are helpful in realizing the goal of Precision Gravity Measurement Facility.展开更多
In this study, a new method for conversion of solid finite element solution to beam finite element solution is developed based on the meta-modeling theory which constructs a model consistent with continuum mechanics. ...In this study, a new method for conversion of solid finite element solution to beam finite element solution is developed based on the meta-modeling theory which constructs a model consistent with continuum mechanics. The proposed method is rigorous and efficient compared to a typical conversion method which merely computes surface integration of solid element nodal stresses to obtain cross-sectional forces. The meta-modeling theory ensures the rigorousness of proposed method by defining a proper distance between beam element and solid element solutions in a function space of continuum mechanics. Results of numerical verification test that is conducted with a simple cantilever beam are used to find the proper distance function for this conversion. Time history analysis of the main tunnel structure of a real ramp tunnel is considered as a numerical example for the proposed conversion method. It is shown that cross-sectional forces are readily computed for solid element solution of the main tunnel structure when it is converted to a beam element solution using the proposed method. Further, envelopes of resultant forces which are of primary importance for the purpose of design, are developed for a given ground motion at the end.展开更多
Stormwater runoff has been identified as a source of pollution for the environment, especially for receiving waters. In order to quantify and manage the impacts of stormwater runoff on the environment, predictive mode...Stormwater runoff has been identified as a source of pollution for the environment, especially for receiving waters. In order to quantify and manage the impacts of stormwater runoff on the environment, predictive models and mathematical models have been developed. Predictive tools such as regression models have been widely used to predict stormwater discharge characteristics. Storm event characteristics, such as antecedent dry days （ADD）, have been related to response variables, such as pollutant loads and concentrations. However it has been a controversial issue among many studies to consider ADD as an important variable in predicting stormwater discharge characteristics. In this study, we examined the accuracy of general linear regression models in predicting discharge characteristics of roadway runoff. A total of 17 storm events were monitored in two highway segments, located in Gwangju, Korea. Data from the monitoring were used to calibrate United States Environmental Protection Agency＇s Storm Water Management Model （SWMM）. The calibrated SWMM was simulated for 55 storm events, and the results of total suspended solid （TSS） discharge loads and event mean concentrations （EMC） were extracted. From these data, linear regression models were developed. R2 and p-values of the regression of ADD for both TSS loads and EMCs were investigated. Results showed that pollutant loads were better predicted than pollutant EMC in the multiple regression models. Regression may not provide the true effect of site-specific characteristics, due to uncertainty in the data.展开更多
Solid–liquid phase equilibrium data for binary(L-arabinose–water) and(D-xylose–water) systems at temperatures from(269.85–298.05) K and ternary(L-arabinose–D-xylose–water) system at temperatures of 273.85 K,278....Solid–liquid phase equilibrium data for binary(L-arabinose–water) and(D-xylose–water) systems at temperatures from(269.85–298.05) K and ternary(L-arabinose–D-xylose–water) system at temperatures of 273.85 K,278.85 K and 284.45 K were measured at atmospheric pressure.The ternary phase diagrams of the systems were constructed on the base of the measured solubility.Two pure solid phases were formed at given temperatures,including pure L-arabinose and pure D-xylose,which were con firmed and determined by the method of Schreinemakers' wet residue.At the same temperature,the crystallization region of L-arabinose was larger than D-xylose's.The acquired solubility data were then correlated using the NRTL model,Wilson model and Xu model.The calculated solubility with the three models agreed well with the experimental values.展开更多
The weakly forced vibration of an axially moving viscoelastic beam is inves- tigated. The viscoelastic material of the beam is constituted by the standard linear solid model with the material time derivative involved....The weakly forced vibration of an axially moving viscoelastic beam is inves- tigated. The viscoelastic material of the beam is constituted by the standard linear solid model with the material time derivative involved. The nonlinear equations governing the transverse vibration are derived from the dynamical, constitutive, and geometrical relations. The method of multiple scales is used to determine the steady-state response. The modulation equation is derived from the solvability condition of eliminating secular terms. Closed-form expressions of the amplitude and existence condition of nontrivial steady-state response are derived from the modulation equation. The stability of non- trivial steady-state response is examined via the Routh-Hurwitz criterion.展开更多
This paper is based on Einstein’s supposition about crystal lattice vibration, which states that when Einstein’s temperature ΘE is not less than the crystal temperature T but less than 2T, the expression of crystal...This paper is based on Einstein’s supposition about crystal lattice vibration, which states that when Einstein’s temperature ΘE is not less than the crystal temperature T but less than 2T, the expression of crystal molar heat capacity changes to the Dulong-Petit equation Cv=3R. Thereby this equation can explain why crystal molar heat capacity equals about 3R not only at low temperatures but also at normal temperatures for many kinds of metals. It can be calculated that the nonlinear interaction among atoms contributes to the molar heat capacity using the coefficient of expansion β and the Grüneisen constant γ. The result is that the relative error between the theoretical and the experimental value of the molar heat capacity is reduced greatly for many kinds of metals, especially for metals of IA. The relative error can be cut by about 17%.展开更多
Based on the new viewpoint of solid and gas interaction mechanics, gas leakage in a double deformable coal seam can be understood. That is, under the action of geophysical fields, the methane flow in a double deformab...Based on the new viewpoint of solid and gas interaction mechanics, gas leakage in a double deformable coal seam can be understood. That is, under the action of geophysical fields, the methane flow in a double deformable coal seam can be essentially considered to be compressible with time dependent and mixed permeation and diffusion through a pore cleat deformable heterogeneous and anisotropy medium. Based on this new viewpoint, a coupled mathematical model for coal seam deformation and gas leakage in a double coal seam was formulated and numerical simulations for gas emission from the coal seam are presented. It is found that coupled models might be closer to reality.展开更多
The principal assumptions about equivalence and energy distribution of the asdorption sites on solidsurfaces used by Langmuir for deriving the equation of monomolecular adsorption are generalized and anew physical ads...The principal assumptions about equivalence and energy distribution of the asdorption sites on solidsurfaces used by Langmuir for deriving the equation of monomolecular adsorption are generalized and anew physical adsorption model is proposed and tested with experimental data published in literature.Themodels of Langmuir,Freundlich,Temkin etc.are only the special cases.Assuming uniform density distributionof adsorption energy,the isotherm equation is given asn=K.1n[1+（bop）1/Mor n=K.1n[1+（boC）1/M]where n is the amount of adsorption per unit weight or area of solid p or C is tbe pressure of gas or the concen-tration of solution respectively.K,bo,M are constants with physical meanings as described in this paper.This equation can be used over wide range to quantitatively represent the five types of physical adsorptionclassified by Brunauer.展开更多
We present the solid model edit distance(SMED),a powerful and flexible paradigm for exploiting shape similarities amongst CAD models.It is designed to measure the magnitude of distortions between two CAD models in bou...We present the solid model edit distance(SMED),a powerful and flexible paradigm for exploiting shape similarities amongst CAD models.It is designed to measure the magnitude of distortions between two CAD models in boundary representation(B-rep).We give the formal definition by analogy with graph edit distance,one of the most popular graph matching methods.To avoid the expensive computational cost potentially caused by exact computation,an approximate procedure based on the alignment of local structure sets is provided in addition.In order to verify the flexibility,we make intensive investigations on three typical applications in manufacturing industry,and describe how our method can be adapted to meet the various requirements.Furthermore,a multilevel method is proposed to make further improvements of the presented algorithm on both effectiveness and efficiency,in which the models are hierarchically segmented into the configurations of features.Experiment results show that SMED serves as a reasonable measurement of shape similarity for CAD models,and the proposed approach provides remarkable performance on a real-world CAD model database.展开更多
A polyhedral solid modeler that operates on boundary representations (B-reps) of ob- jects must derive topological information from numerical data.Due to finite precision of the com- puter,unavoidable numerical calcul...A polyhedral solid modeler that operates on boundary representations (B-reps) of ob- jects must derive topological information from numerical data.Due to finite precision of the com- puter,unavoidable numerical calculation errors may result in ambiguous or contradictory decision of topology.These effects cause existing polyhedral modelers to fail when confronted with objects that nearly align or barely intersect. Based on analysing the reasons which cause the failure of Boolean operation to fail,this paper describes an algorithm using solid integrity to carefully design each step of Boolean operation,so that valid polyhedral modeling results may be achieved.展开更多
文摘Municipal solid waste generation is strongly linked to rising human population and expanding urban areas, with significant implications on urban metabolism as well as space and place values redefinition. Effective management performance of municipal solid waste management underscores the interdisciplinarity strategies. Such knowledge and skills are paramount to uncover the sources of waste generation as well as means of waste storage, collection, recycling, transportation, handling/treatment, disposal, and monitoring. This study was conducted in Dar es Salaam city. Driven by the curiosity model of the solid waste minimization performance at source, study data was collected using focus group discussion techniques to ward-level local government officers, which was triangulated with literature and documentary review. The main themes of the FGD were situational factors (SFA) and local government by-laws (LGBY). In the FGD session, sub-themes of SFA tricked to understand how MSW minimization is related to the presence and effect of services such as land use planning, availability of landfills, solid waste transfer stations, material recovery facilities, incinerators, solid waste collection bins, solid waste trucks, solid waste management budget and solid waste collection agents. Similarly, FGD on LGBY was extended by sub-themes such as contents of the by-law, community awareness of the by-law, and by-law enforcement mechanisms. While data preparation applied an analytical hierarchy process, data analysis applied an ordinary least square (OLS) regression model for sub-criteria that explain SFA and LGBY;and OLS standard residues as variables into geographically weighted regression with a resolution of 241 × 241 meter in ArcMap v10.5. Results showed that situational factors and local government by-laws have a strong relationship with the rate of minimizing solid waste dumping in water bodies (local R square = 0.94).
基金support by the National Key R&D Program of China(Grant No.2023YFA1008901)the National Natural Science Foundation of China(Grant Nos.11988102,12172009)is gratefully acknowledged.
文摘In this manuscript,we propose an analytical equivalent linear viscoelastic constitutive model for fiber-reinforced composites,bypassing general computational homogenization.The method is based on the reduced-order homogenization(ROH)approach.The ROH method typically involves solving multiple finite element problems under periodic conditions to evaluate elastic strain and eigenstrain influence functions in an‘off-line’stage,which offers substantial cost savings compared to direct computational homogenization methods.Due to the unique structure of the fibrous unit cell,“off-line”stage calculation can be eliminated by influence functions obtained analytically.Introducing the standard solid model to the ROH method enables the creation of a comprehensive analytical homogeneous viscoelastic constitutive model.This method treats fibrous composite materials as homogeneous,anisotropic viscoelastic materials,significantly reducing computational time due to its analytical nature.This approach also enables precise determination of a homogenized anisotropic relaxation modulus and accurate capture of various viscoelastic responses under different loading conditions.Three sets of numerical examples,including unit cell tests,three-point beam bending tests,and torsion tests,are given to demonstrate the predictive performance of the homogenized viscoelastic model.Furthermore,the model is validated against experimental measurements,confirming its accuracy and reliability.
文摘In the verification of wire electrical discharge machining （EDM）, the motion and the performance of the wire-EDM system are analyzed. The maximum inclining angle of the wire is calculated. The relevant judgment methods are used for the collision between the wire, the fixture, and the machining table. In the wire-EDM simulation, the generated solid model can he used to investigate programming results and to check the machining accuracy. The generation algorithm for the solid model in the simulation is solved based on Boolean operations. The wire swept volume for each cutting step is united to form the entire wire swept volume. Through Boolean subtraction between the stock model and the entire wire swept volume, the solid model in the wire-EDM simulation is generated. The method is also suitable for the wire path intersection occurred in cutting cone-shaped models. Finally, experiments are given to prove the method.
基金supported by the 3D Model Library of Geo-hazards in the 3GR (No. SXJC-3ZH1A7)the software development of 3D area disaster geology map in the 3GR (No. SXJC-3ZH1A6)+1 种基金survey data acquisition and geologic map CAD system in the 3GR (No. SXKY4-02)985 Platform Projects,3D modeling and space analysis system of geo-hazards and the National Natural Science Foundation of China (No. 41172300)
文摘Taking hundreds of pieces of hazardous geological maps （1 ： 10 000） of Three Gorges res-ervoir area （3GR） as background, we establish regional three-dimensional （3D） geo-hazard modelusing DEM （digital elevation model） superposed surface images and geo-hazards elements. Based on landslides and other geo-hazard survey data,using improved B-REP（boundary representa-tion）entity data structure （two-body 3D data structure）, we set up 3D solid models for each hazardous bodies in each hazardous geological maps. Then we integrate the two types of 3D models with different scales from area to point, which are the regional geo-hazard 3D model and the solid models of each disaster body, in order to provide a visual processing and analysis plat-form for danger partition, stability evaluation, disaster prevention and control, early warning and command.
文摘SUMMARY： Realizing the potential of geothermal energy as a cheap, green, sustainable resource to provide for the planet＇s future energy demands that a key geophysical problem be solved first： how to develop and maintain a network of multiple fluid flow pathways for the time required to deplete the heat within a given region. We present the key components for micro-scale particle-based numerical modeling of hydraulic fracture, and fluid and heat flow in geothermal reservoirs. They are based on the latest developments of ESyS-Particle--the coupling of the lattice sofid model （LSM） to simulate the nonlinear dynamics of complex solids with the lattice Boltzmann method （LBM） applied to the nonlinear dynamics of coupled fluid and heat flow in the complex solid-fluid system. The coupled LSM/LBM can be used to simulate development of fracture systems in discontinuous media, elastic stress release, fluid injection and the consequent slip at joint surfaces, and hydraulic fractur- ing; heat exchange between hot rocks and water within flow pathways created through hydraulic fracturing; and fluid flow through complex, narrow, compact and gouge- or powder-f＇flled fracture and joint systems. We demonstrate the coupled LSM/LBM to simulate the fundamental processes listed above, which are all components for the generation and sustainability of the hot-fractured rock geothermal energy fracture systems required to exploit this new green-energy resource.
基金Project supported by the Hi-Tech Research and Development Pro-gram (863) of China (Nos. 2007AA01Z311 and 2007AA04Z1A5)the Postdoctoral Science Foundation of China (No. 20070421185)the National Research Foundation for the Doctoral Program of Higher Education of China (No. 20060335114)
文摘In this paper we propose a method to model flowers of solid shape. Based on (Ijiri et al., 2005)’s method, we separate individual flower modeling and inflorescence modeling procedures into structure and geometry modeling. We incorporate interactive editing gestures to allow the user to edit structure parameters freely onto structure diagram. Furthermore, we use free-hand sketching techniques to allow users to create and edit 3D geometrical elements freely and easily. The final step is to automatically merge all independent 3D geometrical elements into a single waterproof mesh. Our experiments show that this solid modeling approach is promising. Using our approach, novice users can create vivid flower models easily and freely. The generated flower model is waterproof. It can have applications in visualization, animation, gaming, and toys and decorations if printed out on 3D rapid prototyping devices.
基金National Natural Science Foundation of China (No.59990470)
文摘In allusion to the deficient feature of product information in conceptualdesign, a framework of deficient information modeling for conceptual shape design is put forward,which includes qualitative shape modeling (a qualitative solid model), uncertain shape modeling (anuncertain relation model) and imprecise shape modeling (an imprecise region model). In theframework, the qualitative solid model is the core, which represents qualitatively (using symbols)the conceptual shapes of mechanical products. The uncertain relation model regarding domainrelations as objects and the imprecise region model regarding domains as objects are used to dealwith the uncertain and imprecise issues respectively, which arise from qualitative shape modeling orexist in product information itself.
基金Project supported by the National Natural Science Foundation of China (No. 60473106)the Hi-Tech Research and Development Program (863) of China (Nos. 2007AA01Z311 and 2007AA04Z1A5)the National Research Foundation for the Doctoral Program of Higher Education of China (No. 20060335114)
文摘Swept volume solid modeling has been applied to many areas such as NC machining simulation and verification, robot workspace analysis, collision detection, and CAD. But self-intersections continue to be a challenging problem in the boundary representation of swept volume solids. A novel algorithm is presented in this paper to trim self-intersection regions in swept volume solids modeling. This trimming algorithm consists of two major steps: (1) roughly detecting self-intersection regions by checking intersections or overlapping of the envelop profiles; (2) splitting the whole envelop surfaces of the swept volume solid into separate non-self-intersecting patches to trim global self-intersections, and to trim local self-intersections, dividing local self-intersecting regions into patches and replacing self-intersecting patches with non-self-intersecting ones. Examples show that our algorithm is efficient and robust.
基金supported by the National Key Research and Development Program of China(No.2017YFE9134700)the Natural Science Foundation of Zhejiang Province,China(No.LY22G010001)+3 种基金the Program of Humanities and Social Science of Education Ministry of China(No.20YJA630008)the Ningbo Natural Science Foundation of China(Nos.2021J235 and 2021J111)the Fund of Healthy&Intelligent Kitchen Engineering Research Center of Zhejiang Provincethe K.C.Wong Magna Fund in Ningbo University,China.
文摘In order to alleviate unstable factor-caused bifurcation and reduce oscillations in traffic flow,a feedback control with consideration of time delay is designed for the solid angle model(SAM).The stability and bifurcation condition of the new SAM is derived through linear analysis and bifurcation analysis,and then accurate range of stable region is obtained.In order to explore the mechanism of the influence of multiple parameter combinations on the stability of controlled systems,a definite integral stabilization method is provided to determine the stable interval of time delay and feedback gain.Numerical simulations are explored to verify the feasibility and effectiveness of the proposed model,which also demonstrate that feedback gain and delay are two key factors to alleviate traffic congestion in the SAM.
基金Supported by the Science Fund for Creative Research Groups of National Natural Science Foundation of China(No.51021004)Tianjin Research Program of Application Foundation and Advanced Technology(No.12JCZDJC29200)National Key Technology R and D Program in the 12th Five-Year Plan of China(No.2011BAB10B06)
文摘An automatic generation method of geological cross-sections in dredging engineering based on 3D geological solid models is presented.The 3D geological models are built applying the non-uniform rational B-splines(NURBS) technique,and a 2D profile can be calculated and generated automatically through Boolean operation to meet the demands of dredging projects.Moreover,an automatic marking method for geological attributes is put forward based on database technology,and the geological attributes include the profile name,scale,horizontal and vertical relative coordinates,geological lithology,and 2D standard lithology legend.At the same time,the automatic marking method can also provide an interactive mode for geological engineers to edit and modify the profile in the modeling system.Practical engineering applications show that the automatic generation method is a simple,flexible,fast and precise visual graphics rendering process that can create 2D standard profiles automatically and efficiently.This method also provides a convenient support tool for geological engineering digital analysis.
基金supported by the National Natural Science Foundation of China(Grant No.41974014)the Open Fund of State Laboratory of Information Engineering in Surveying,Mapping and Remote Sensing,Wuhan University(Grant No.19P01)
文摘It is significant for establishing gravity datum to construct precise gravity solid tidal model,A simple method with relatively low performance is to interpolate tidal parameters from the global gravity solid tide models.A competitive approach is to determine local gravity solid tidal model by harmonic analysis using long-time serial gravity observations.In this paper a new high-precision gravity solid tidal model for Precision Gravity Measurement Facility is estimated from two co-site gravimeters in the cave laboratory using modern international standard data processing techniques,whose accuracy is evaluated further by comparing with previous publications.The results show that:(1)the determined gravity solid tidal models from two co-site gravimeters are in good agreement with each other,of which the maximum differences for amplitude factors and phase delays don’t exceed 0.01700%and 2.50990°,respectively.(2)the performance of the obtained gravity solid tidal model is 0.00411 for amplitude factors and 0.24120°for phase delays,which is a little better than that of previous publications using superconducting gravity data from Wuhan station.(3)our results and methods are corrective and effective.(4)our model is tiny different from that provided by Wuhan station,which implies that it is necessary to construct a gravity solid tidal model for Precision Gravity Measurement Facility,rather than just adopting existing models at Wuhan station.Our results are helpful in realizing the goal of Precision Gravity Measurement Facility.
文摘In this study, a new method for conversion of solid finite element solution to beam finite element solution is developed based on the meta-modeling theory which constructs a model consistent with continuum mechanics. The proposed method is rigorous and efficient compared to a typical conversion method which merely computes surface integration of solid element nodal stresses to obtain cross-sectional forces. The meta-modeling theory ensures the rigorousness of proposed method by defining a proper distance between beam element and solid element solutions in a function space of continuum mechanics. Results of numerical verification test that is conducted with a simple cantilever beam are used to find the proper distance function for this conversion. Time history analysis of the main tunnel structure of a real ramp tunnel is considered as a numerical example for the proposed conversion method. It is shown that cross-sectional forces are readily computed for solid element solution of the main tunnel structure when it is converted to a beam element solution using the proposed method. Further, envelopes of resultant forces which are of primary importance for the purpose of design, are developed for a given ground motion at the end.
基金supported by the Korea Ministry of Environment, as "The Eco-innovation Project" (No. 413111-003)
文摘Stormwater runoff has been identified as a source of pollution for the environment, especially for receiving waters. In order to quantify and manage the impacts of stormwater runoff on the environment, predictive models and mathematical models have been developed. Predictive tools such as regression models have been widely used to predict stormwater discharge characteristics. Storm event characteristics, such as antecedent dry days （ADD）, have been related to response variables, such as pollutant loads and concentrations. However it has been a controversial issue among many studies to consider ADD as an important variable in predicting stormwater discharge characteristics. In this study, we examined the accuracy of general linear regression models in predicting discharge characteristics of roadway runoff. A total of 17 storm events were monitored in two highway segments, located in Gwangju, Korea. Data from the monitoring were used to calibrate United States Environmental Protection Agency＇s Storm Water Management Model （SWMM）. The calibrated SWMM was simulated for 55 storm events, and the results of total suspended solid （TSS） discharge loads and event mean concentrations （EMC） were extracted. From these data, linear regression models were developed. R2 and p-values of the regression of ADD for both TSS loads and EMCs were investigated. Results showed that pollutant loads were better predicted than pollutant EMC in the multiple regression models. Regression may not provide the true effect of site-specific characteristics, due to uncertainty in the data.
基金Supported by the National Natural Science Foundation of China(21376231)
文摘Solid–liquid phase equilibrium data for binary(L-arabinose–water) and(D-xylose–water) systems at temperatures from(269.85–298.05) K and ternary(L-arabinose–D-xylose–water) system at temperatures of 273.85 K,278.85 K and 284.45 K were measured at atmospheric pressure.The ternary phase diagrams of the systems were constructed on the base of the measured solubility.Two pure solid phases were formed at given temperatures,including pure L-arabinose and pure D-xylose,which were con firmed and determined by the method of Schreinemakers' wet residue.At the same temperature,the crystallization region of L-arabinose was larger than D-xylose's.The acquired solubility data were then correlated using the NRTL model,Wilson model and Xu model.The calculated solubility with the three models agreed well with the experimental values.
基金Project supported by the National Natural Science Foundation of China (No.10972143)the Shanghai Municipal Education Commission (No.YYY11040)+2 种基金the Shanghai Leading Academic Discipline Project (No.J51501)the Leading Academic Discipline Project of Shanghai Institute of Technology(No.1020Q121001)the Start Foundation for Introducing Talents of Shanghai Institute of Technology (No.YJ2011-26)
文摘The weakly forced vibration of an axially moving viscoelastic beam is inves- tigated. The viscoelastic material of the beam is constituted by the standard linear solid model with the material time derivative involved. The nonlinear equations governing the transverse vibration are derived from the dynamical, constitutive, and geometrical relations. The method of multiple scales is used to determine the steady-state response. The modulation equation is derived from the solvability condition of eliminating secular terms. Closed-form expressions of the amplitude and existence condition of nontrivial steady-state response are derived from the modulation equation. The stability of non- trivial steady-state response is examined via the Routh-Hurwitz criterion.
文摘This paper is based on Einstein’s supposition about crystal lattice vibration, which states that when Einstein’s temperature ΘE is not less than the crystal temperature T but less than 2T, the expression of crystal molar heat capacity changes to the Dulong-Petit equation Cv=3R. Thereby this equation can explain why crystal molar heat capacity equals about 3R not only at low temperatures but also at normal temperatures for many kinds of metals. It can be calculated that the nonlinear interaction among atoms contributes to the molar heat capacity using the coefficient of expansion β and the Grüneisen constant γ. The result is that the relative error between the theoretical and the experimental value of the molar heat capacity is reduced greatly for many kinds of metals, especially for metals of IA. The relative error can be cut by about 17%.
文摘Based on the new viewpoint of solid and gas interaction mechanics, gas leakage in a double deformable coal seam can be understood. That is, under the action of geophysical fields, the methane flow in a double deformable coal seam can be essentially considered to be compressible with time dependent and mixed permeation and diffusion through a pore cleat deformable heterogeneous and anisotropy medium. Based on this new viewpoint, a coupled mathematical model for coal seam deformation and gas leakage in a double coal seam was formulated and numerical simulations for gas emission from the coal seam are presented. It is found that coupled models might be closer to reality.
文摘The principal assumptions about equivalence and energy distribution of the asdorption sites on solidsurfaces used by Langmuir for deriving the equation of monomolecular adsorption are generalized and anew physical adsorption model is proposed and tested with experimental data published in literature.Themodels of Langmuir,Freundlich,Temkin etc.are only the special cases.Assuming uniform density distributionof adsorption energy,the isotherm equation is given asn=K.1n[1+（bop）1/Mor n=K.1n[1+（boC）1/M]where n is the amount of adsorption per unit weight or area of solid p or C is tbe pressure of gas or the concen-tration of solution respectively.K,bo,M are constants with physical meanings as described in this paper.This equation can be used over wide range to quantitatively represent the five types of physical adsorptionclassified by Brunauer.
基金Supported by National Science Foundation of China(61373071)
文摘We present the solid model edit distance(SMED),a powerful and flexible paradigm for exploiting shape similarities amongst CAD models.It is designed to measure the magnitude of distortions between two CAD models in boundary representation(B-rep).We give the formal definition by analogy with graph edit distance,one of the most popular graph matching methods.To avoid the expensive computational cost potentially caused by exact computation,an approximate procedure based on the alignment of local structure sets is provided in addition.In order to verify the flexibility,we make intensive investigations on three typical applications in manufacturing industry,and describe how our method can be adapted to meet the various requirements.Furthermore,a multilevel method is proposed to make further improvements of the presented algorithm on both effectiveness and efficiency,in which the models are hierarchically segmented into the configurations of features.Experiment results show that SMED serves as a reasonable measurement of shape similarity for CAD models,and the proposed approach provides remarkable performance on a real-world CAD model database.
文摘A polyhedral solid modeler that operates on boundary representations (B-reps) of ob- jects must derive topological information from numerical data.Due to finite precision of the com- puter,unavoidable numerical calculation errors may result in ambiguous or contradictory decision of topology.These effects cause existing polyhedral modelers to fail when confronted with objects that nearly align or barely intersect. Based on analysing the reasons which cause the failure of Boolean operation to fail,this paper describes an algorithm using solid integrity to carefully design each step of Boolean operation,so that valid polyhedral modeling results may be achieved.
