The investigation of the long-term performance of solidified/stabilized （S/S） contaminated soils was carried out in a trial site in southeast UK. The soils were exposed to the maximum natural weathering for four yea...The investigation of the long-term performance of solidified/stabilized （S/S） contaminated soils was carried out in a trial site in southeast UK. The soils were exposed to the maximum natural weathering for four years and sampled at various depths in a controlled manner. The chemical properties （e.g., degree of carbonation （DOC）, pH, electrical conductivity （EC）） and physical properties （e.g., moisture content （MC）, liquid limit CLL）, plastic limit （PL）, plasticity index （PI）） of the samples untreated and treated with the traditional and accelerated carbonated S/S processes were analyzed. Their variations on the depths of the soils were also studied. The result showed that the broad geotechnical properties of the soils, manifested in their PIs, were related to the concentration of the water soluble ions and in particular the free calcium ions. The samples treated with the accelerated carbonation technology （ACT）, and the untreated samples contained limited number of free calcium ions in solutions and consequently interacted with waters in a similar way. Compared with the traditional cement-based S/S technology, e.g., treatment with ordinary portland cement （OPC） or EnvirOceM, ACT caused the increase of the PI of the treated soil and made it more stable during long-term weathering. The PI values for the four soils ascended according to the order： the EnvirOceM soil, the OPC soil, the ACT soil, and the untreated soil while their pH and EC values descended according to the same order.展开更多
Solidification/stabilization （S/S） is one of the most effective methods of dealing with heavy metal contaminated soils. The effects of cyclic wetting and drying on solidified/stabilized contaminated soils were inves...Solidification/stabilization （S/S） is one of the most effective methods of dealing with heavy metal contaminated soils. The effects of cyclic wetting and drying on solidified/stabilized contaminated soils were investigated. A series of test program, unconfined compressive strength （UCS） test, TCLP leaching test and scanning electron microscopy （SEM） test, were performed on lead and zinc contaminated soils solidified/stabilized by fly ash. Test results show that UCS and the leaching characteristics of heavy metal ions of S/S contaminated soils are significantly improved with the increase of fly ash content. UCS of S/S soils firstly increases with the increase of the times of drying and wetting cycles, after reaching the peak, it decreases with it. When the pollutant content is lower （1 000 mg/kg）, the TCLP concentration first slightly decreases under cyclic drying and wetting, then increases, but the change is minor. The TCLP concentration is higher under a high pollutant content of 5 000 mg/kg, and increases with the increase of the times of drying and wetting cycles. The results of scanning electron microscopy （SEM） test are consistent with UCS tests and TCLP leaching tests, which reveals the micro-mechanism of the variations of engineering properties of stabilized contaminated soils after drying and wetting cycles.展开更多
This study aims to evaluate the possibility of reusing treated marine clayey soils by stabilization/solidification(S/S)technology as geomaterial in reclamation projects from the aspects of engineering strength,chemica...This study aims to evaluate the possibility of reusing treated marine clayey soils by stabilization/solidification(S/S)technology as geomaterial in reclamation projects from the aspects of engineering strength,chemical modification and environmental risk assessment.The lime-activated incinerated sewage sludge ash(ISSA)together with ground granulated blast furnace slag(GGBS)was employed as the binder.The multi-controlling factors including water content,curing time,salinity,and chemical compositions of mixing solution were taken into account to identify the S/S treated Hong Kong marine deposit(HKMD)slurry based on the strength tests,pH measurement,thermo-gravimetric(TG)analysis,X-ray diffractometer(XRD),Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy coupled with energy-dispersive spectrometry(SEM-EDS)and toxicity characteristic leaching procedure(TCLP)tests,etc.The results show that the S/S treatment using lime-activated ISSA-GGBS can effectively enhance the strength of marine soil at the initial water content of 110%and 200%.The water content and curing time have a significant impact on the S/S treated HKMD.The pH of treated soils is higher than 11.1,which proves an alkaline environment for the reactions in the treated soil.A special case is the treated HKMD at 200%water content hydrated by MgCl_(2)solution,which has a low pH of 10.23 and maintains a slurry state.Based on the TCLP results,the leaching concentration of heavy metals from S/S treated HKMD is environmentally safe and meets Hong Kong standard for reusing treated soil with a low level of<0.2 mg/L.The content of main products such as calcium/magnesium silicate hydrate,ettringite or Friedel's salt depends on the chemical additions(e.g.distilled water,seawater,NaCl and Na_(2)SO_(4)).The products in the specimens mixed with MgCl_(2)solutions are mainly composed of Mg(OH)_(2),M-S-H and MgCO_(3),which is distinct with the neoformations in the other cases.Therefore,this study proves that the S/S treated soil slurry could be reused as geomaterials in reclamation projects,and the S/S process is greatly affected by water content,curing time and solution compositions,etc.展开更多
The effects of the high pressure die casting(HPDC)processes on porosity,microstructure,and mechanical properties of heat-treatment-free aluminum silicon(Al-Si)alloys have long been a focal point in automotive die-cast...The effects of the high pressure die casting(HPDC)processes on porosity,microstructure,and mechanical properties of heat-treatment-free aluminum silicon(Al-Si)alloys have long been a focal point in automotive die-casting research.In this work,the combined effect of shot sleeve materials and slow shot speeds on porosity,microstructure and mechanical properties of a newly designed HPDC Al-Si alloy was investigated.Results show that employing a ceramic shot sleeve or increasing the slow shot speed significantly reduces both the average size and area fraction of externally solidified crystals(ESCs),as well as the average pore size and volume fraction.When the slow shot speed is increased from 0.05 m·s^(-1)to 0.1 m·s^(-1),the pore volume fraction decreases by 10.2%in steel-shot-sleeve samples,compared to a substantial 67.1%reduction in ceramic-shot-sleeve samples.At a slow shot speed of 0.1 m·s^(-1),castings produced with a ceramic shot sleeve exhibit superior mechanical properties:8.3%higher yield strength,17.4%greater tensile strength,and an 81.4%improvement in elongation,relative to those from a steel shot sleeve.These findings provide valuable insights for minimizing porosity and coarse ESCs in die castings,offering promising potential for broader industrial applications.展开更多
Rapid industrialization in China has caused significant environmental challenges,particularly heavy metal pollution from mine tailings.Toxic heavy metals such as lead(Pb),cadmium(Cd),and mercury(Hg)are released during...Rapid industrialization in China has caused significant environmental challenges,particularly heavy metal pollution from mine tailings.Toxic heavy metals such as lead(Pb),cadmium(Cd),and mercury(Hg)are released during the processing of mining wastewater and leaching of mine tailings.Owing to their excellent physicochemical properties,cementitious materials are widely used for the solidification/stabilization of heavy metals,immobilizing heavy metals via two distinct mechanisms.Physically,their favorable characteristics,including high mechanical strength,low porosity,and durable matrix,create effective barriers.Chemically,the alkaline environment facilitates the precipitation of metal hydroxides/carbonates.Conversely,hydration products(calcium silicate hydrate gels and ettringite)contribute to immobilization through adsorption and physical encapsulation.This study systematically investigated the migration mechanisms of heavy metal contaminants in mine tailings;further,it elucidated the multifaceted immobilization pathways of cementitious materials,which involve synergistic adsorption,precipitation,and encapsulation by hydration products combined with homocrystalline substitution.A comprehensive analysis indicated that cementitious materials significantly reduced the mobility and bioavailability of heavy metals.Nonetheless,their long-term stability and potential environmental impact require further investigation.This study aims to provide theoretical support for environmental management and sustainable resource utilization,and to explore the broader application potential of cementitious technology for heavy metal stabilization,thereby establishing a theoretical foundation for future research on heavy metals in low-cement solidified/stabilized tailings.展开更多
We examined the enhancing effects of different dosages of product of Centrifugation of Bacterial Liquid(product of CBL)on the performance of slag-fGD gypsum-cement-bentonite-sludge system using MICP technology.We anal...We examined the enhancing effects of different dosages of product of Centrifugation of Bacterial Liquid(product of CBL)on the performance of slag-fGD gypsum-cement-bentonite-sludge system using MICP technology.We analyzed the multifaceted performance of the solidified sludge from macroscopic and microscopic perspectives.The experimental results reveal that the increase in product of CBL dosage results in positive impacts on the solidified sludge,including higher side compressive strength,lower leachate heavy metal concentration,and improved crack repair rates.At a 0.4%product of CBL doping concentration,the strength of the solidified sludge is enhanced by 26.6%at 3 d,61.2%at 7 d,and 13.9%at 28 d when compared to the unmodified solidified sludge.After 28 days,the concentrations of Zn and Cu ions reduce by 58%and 18%,respectively,and the crack repair rate is 58.4%.These results demonstrate that the increase in heavy metal concentration in the leachate leads to an increase in the strength of the solidified sludge.The strengthening procedure heavily relies on the mineralisation reaction of Bacillus pasteurii,which produces a substantial amount of CaCO_(3)to cement the particles and fill the pores initially.The modified solidifying sludge exhibits a self-repairing effect and an enhanced multifaceted performance as a result of oxygen being restored after crack formation and reactivation of Bacillus pasteurii.Such conditions facilitate the body's recovery.展开更多
A rapidly solidified Al-2.5Ti-2.5Fe-2.5Cr (mass fraction in percent) alloywas prepared by melt spinning. As-quenched and as-annealed microstructures were studied by X-raydiffractometry (XRD), transmission electron mic...A rapidly solidified Al-2.5Ti-2.5Fe-2.5Cr (mass fraction in percent) alloywas prepared by melt spinning. As-quenched and as-annealed microstructures were studied by X-raydiffractometry (XRD), transmission electron microscopy (TEM), high-resolution transmission electronmicroscopy (HREM) and energy dispersive spectrum (EDS) analysis. The microhardness of the alloy atdifferent annealing temperatures was measured. The results obtained indicate that the microhardnessof the rapidly solidified Al-2.5Ti-2.5Fe-2.5Cr alloy does not vary with different annealingtemperatures. The as-quenched microstructure of the alloy includes two kinds of dispersed primaryphases: Al_3Ti and Al_(13)(Cr, Fe)_2. After annealing at 400 deg C for 10 h, the stable phaseAl_(13)Fe_4 appears in the microstructure.展开更多
The rapidly solidified powder of AlFeCrZrVSi aluminum alloy was prepared using multistage atomization and consolidated by hotextrusion, the evolution of microstructure of the extruded materials during thermal exposure...The rapidly solidified powder of AlFeCrZrVSi aluminum alloy was prepared using multistage atomization and consolidated by hotextrusion, the evolution of microstructure of the extruded materials during thermal exposure was studied with optical microscope, Xray diffraction and transmission electron microscope(TEM). The results show that the majority of dispersions present in the asextruded alloy are metastable Al12(Fe, Cr, V)3Si, which has excellent thermaldynamical stability and coarsening resistance; the coarsening ratecontrolling process of the Al12(Fe, Cr, V)3Si phase is considered to be diffusion of Fe atom along grain boundaries instead of bulk diffusion of Fe atom.展开更多
As the raw materials in the post process of rolling and heat treatment, ingots have great effects on the properties of the final products. Inclusions and solidification structures are the most important aspects of the...As the raw materials in the post process of rolling and heat treatment, ingots have great effects on the properties of the final products. Inclusions and solidification structures are the most important aspects of the quality of ingots. Niobium and titanium are usually used to react with carbon and nitrogen to improve the properties of ferritic stainless steels. In this research, combined with thermodynamic calculation, effects of niobium and titanium on the inclusions and solidification structures in three kinds of high pure ferritic stainless steels with different titanium additions were investigated by optical microscope（OM）, scanning electron microscope（SEM）, transmission electron microscope（TEM）, and energy disperse spectrometer（EDS）. Results show that Al2O3 and a few（Nb,Ti）N particles form when titanium addition is 0.01 %.Furthermore, inclusions are mainly Ti N and Al2O3–Ti Ox–Ti N duplex inclusions when titanium addition is more than0.10 %. Those two types of inclusions are in well distribution, and can afford nuclei to the solidification process.Therefore, the ratio of equiaxed zone increases with the increase of titanium addition. The ratio increases from42.1 % to 64.0 % with the titanium addition increasing from 0.01 % to 0.10 %, and it increases to 85.7 % when the titanium addition reaches 0.34 %.展开更多
High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile industry.Mg can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress aro...High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile industry.Mg can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress arouses the deformation of large integrated die-castings.Herein,the development of non-heat treatment Al alloys is becoming the hot topic.In addition,HPDC contains externally solidified crystals(ESCs),which are detrimental to the mechanical properties of castings.To achieve high strength and toughness of non-heat treatment die-casting Al-Si alloy,we used AlSi9Mn alloy as matrix with the introduction of Zr,Ti,Nb,and Ce.Their influences on ESCs and mechanical properties were systematically investigated through three-dimensional reconstruction and thermodynamic simulation.Our results reveal that the addition of Ti increased ESCs'size and porosity,while the introduction of Nb refined ESCs and decreased porosity.Meanwhile,large-sized Al_3(Zr,Ti)phases formed and degraded the mechanical properties.Subsequent introduction of Ce resulted in the poisoning effect and reduced mechanical properties.展开更多
Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage p...Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage poses challenges for the performance and stability of air electrodes.In this work,a novel high-entropy perovskite oxide La_(0.2)Pr_(0.2)Gd_(0.2)Sm_(0.2)Sr_(0.2)Co_(0.8)Fe_(0.2)O_(3−δ)(HE-LSCF)is proposed and investigated as an air electrode in RSOC.The electrochemical behavior of HE-LSCF was studied as an air electrode in both fuel cell and electrolysis modes.The polarization impedance(Rp)of the HE-LSCF electrode is only 0.25Ω·cm^(2) at 800℃ in an air atmosphere.Notably,at an electrolytic voltage of 2 V and a temperature of 800℃,the current density reaches up to 1.68 A/cm^(2).The HE-LSCF air electrode exhibited excellent reversibility and stability,and its electrochemical performance remains stable after 100 h of reversible operation.With these advantages,HE-LSCF is shown to be an excellent air electrode for RSOC.展开更多
With the multiphase field method, the stability of lamellar basic state is investigated during the directional solidification of eutectic alloy CBr4-C2Cl6. A great number of lamellar patterns observed in experiments a...With the multiphase field method, the stability of lamellar basic state is investigated during the directional solidification of eutectic alloy CBr4-C2Cl6. A great number of lamellar patterns observed in experiments are simulated, and a stability diagram for lamellar pattern selections is presented. The simulated growth behaviours of these patterns are found to be qualitatively consistent with Karma et al＇s numerical calculations and experimental results. The formation of the primary instability is attributed to the destabilization of solute boundary layer.展开更多
Rapidly solidified Al92.3Fe4.3V0.7Si1.7Mm1.0 alloy has been studied by positron lifetime spectroscopy and the variations on the intedecial defects with the annealing temperature were revealed by an analysis of the lif...Rapidly solidified Al92.3Fe4.3V0.7Si1.7Mm1.0 alloy has been studied by positron lifetime spectroscopy and the variations on the intedecial defects with the annealing temperature were revealed by an analysis of the lifetime results. The intedece characteristics derived from the positron-lifetime results could be used to give a satisfactory interpretation of the dependence of mechanical properties on the annealing temperature展开更多
Approximately 3.44 billion tons of copper mine tailings(MT)were produced globally in 2018 with an increase of 45%from 2010.Significant efforts are being made to manage these tailings through storage facilities,recycli...Approximately 3.44 billion tons of copper mine tailings(MT)were produced globally in 2018 with an increase of 45%from 2010.Significant efforts are being made to manage these tailings through storage facilities,recycling,and reuse in different industries.Currently,a large portion of tailings are managed through the tailing storage facilities(TSF)where these tailings undergo hydro-thermal-mechanical stresses with seasonal cycles which are not comprehensively understood.This study presents an investigative study to evaluate the performance of control and cement-stabilized copper MT under the influence of seasonal cycles,freeze-thaw(F-T)and wet-dry(W-D)conditions,representing the seasonal variability in the cold and arid regions.The control and cement-stabilized MT samples were subjected to a maximum of 12 F-T and 12 W-D cycles and corresponding micro-and-macro behavior was investigated through scanning electron microscope(SEM),volumetric strain(εvT,wet density(r),moisture content loss,and unconfined compressive strength(UCS)tests.The results indicated the vulnerability of Copper MT to 67%and 75%strength loss reaching residual states with 12 F-T and 8 W-D cycles,respectively.Whereas the stabilized MT retained 39%-55%and 16%-34%strength with F-T and W-D cycles,demonstrating increased durability.This research highlights the impact of seasonal cycles and corresponding strength-deformation characteristics of control and stabilized Copper MT in cold and arid regions.展开更多
This paper reports on laser surface remelting experiments performed on a Zn-2wt.%Cu hypoperitectic alloy by employing a 5kW CW CO2 laser at scanning velocities between 6 and 1207mm/s. The growth velocities of the mi- ...This paper reports on laser surface remelting experiments performed on a Zn-2wt.%Cu hypoperitectic alloy by employing a 5kW CW CO2 laser at scanning velocities between 6 and 1207mm/s. The growth velocities of the mi- crostructures in the laser molten pool were accurately measured. The planar interface structure caused by the high velocity absolute stability was achieved at a growth velocity of 210 mm/s. An implicit expression of the critical solidification velocity for the cellular-planar transition was carried out by nonlinear stability analyses of the planar interface. The results showed a better agreement with the measured critical velocity than that predicted by M-S theory. Cell-free structures were observed throughout the whole molten pool at a scanning velocity of 652 mm/s and the calculated minimum temperature gradient in this molten pool was very close to the critical temperature gradient for high gradient absolute stability （HGAS） of the η phase. This indicates that HGAS was successfully achieved in the present experiments.展开更多
Non-aqueous emulsions have a wide range of applications in cosmetics,drug-controlled release,and the preparation of functional nanoparticles.However,due to the weaker polarity of non-aqueous solvents,these emulsions o...Non-aqueous emulsions have a wide range of applications in cosmetics,drug-controlled release,and the preparation of functional nanoparticles.However,due to the weaker polarity of non-aqueous solvents,these emulsions often exhibit inferior stability compared to their aqueous counterparts.In this experiment,the properties of quaternary ammonium surfactants in glycerol were investigated through surface tension measurements,to further enhance the stability of n-decane/glycerol emulsions,hydrophilic nanoparticles SiO_(2) were modified in situ using double tailed quaternary ammonium surfactants Di-C_(12)DAB and Di-C_(16)DAB.Stable n-decane/glycerol Pickering emulsions were successfully prepared.These emulsions were stable at 45℃for over six months,and no significant changes in droplet size occurred.The minimum droplet size of the emulsion was only 2-3μm.Contact angle measurements showed that the wettability of the silica surface was tremendously affected by the concentration and the alkyl chain length of the double-tailed surfactants.In the presence of Di-C_(12)DAB,the contact angle of glycerol on the silica surface increased monotonically with the surfactant concentration.This explains the phenomenon that the Pickering emulsions containing Di-C_(12)DAB and silica particles were stable within the contact angle range of 80°-120°.Comparatively,the contact angle of the glycerol on the silica surface in the presence of Di-C_(16)DAB first increased with surfactant concentrations and then decreased,reaching a maximum at 0.6 mmol/L.It can be concluded that Di-C_(12)DAB formed monolayers at the surface of silica particles within all investigated concentrations.On the contrary,Di-C_(16)DAB formed monolayers at concentrations below 0.6 mmol/L and formed double layers at concentrations above 0.6 mmol/L,leading to a non-monotonic change in the contact angle with respect to concentration.Using these stable non-aqueous Pickering emulsions as templates,polymer microspheres with a particle size of 2-3μm were successfully prepared with high yield.This work is helpful to expand the potential applications of non-aqueous emulsions in the encapsulation of drug,controlled release,material preparation,and cosmetic formulations.展开更多
Loess slopes in cold and arid regions are susceptible to shallow soil degradation,which may trigger severe environmental problems related to soil erosion.To address this environmental challenge,this study selected a c...Loess slopes in cold and arid regions are susceptible to shallow soil degradation,which may trigger severe environmental problems related to soil erosion.To address this environmental challenge,this study selected a compound ecological curing agent composed of gellan gum and guar gum for stabilizing shallow loess slopes.Triaxial compression and disintegration tests were employed to comparatively analyze the effects of compound gum content,mass mix ratio,and curing age on the mechanical and disintegration properties of solidified loess.The curing mechanism was analyzed using scanning electron microscopy(SEM),and the ecological protection effect was monitored for a 60-day period.The results indicate that gellan gum,guar gum,and the compound gum can enhance the mechanical and disintegration properties of loess,promote plant growth,and optimize the ecological environment.However,the combination of gellan gum and guar gum proves more effective than using either gellan gum or guar gum alone.Considering the effects on mechanical properties,disintegration performance,and material economy,the disintegration rate of loess decreases by 75.72%compared to plain loess when the compound glue content is 0.5%,the mixing ratio of gellan gum to guar gum is 3:7 and the curing age is 7 days.Meanwhile,the cohesion and internal friction angle increase by 118.06%and 10.97%,respectively.Moreover,the disintegration performance and mechanical properties of the samples first increase and then decrease with the increase in compound glue and the mix ratio and are basically stabilized after the curing age reaches 7d.展开更多
Evaluating the stabilized lead(Pb)-contaminated soils through sampling and laboratory testing involves costly and time-consuming processes.Therefore,this study employed a low-cost and non-destructive resistivity tool ...Evaluating the stabilized lead(Pb)-contaminated soils through sampling and laboratory testing involves costly and time-consuming processes.Therefore,this study employed a low-cost and non-destructive resistivity tool to evaluate the Pb-contaminated soils stabilized by electrolytic manganese residue(EMR)-based geopolymer(EG-OPC)from the strength and environmental benefits perspective.First,unconfined compressive strength(UCS)and leaching tests were conducted to study the stabilization effectiveness of EG-OPC.Results indicated that the UCS values of soil(5000 mg/kg of pollutants)stabilized by 20%EG-OPC were 4.87 MPa and 8.13 MPa after 7 d and 60 d of curing,respectively.After 60 d of curing,the Pb concentration in the leachate reached 44 mg/L,far lower than the control group(321 mg/L).Second,soil,pore water,and leachate resistivity(ERS,ERW,and ERL)were measured to establish fitting relationships with strength parameters and pollution risk.The good fitting results(e.g.ERS/ERW versus UCS/secant modulus(E50):correlation coefficient R2 z 0.9,ERS/ERW versus Pb contents:R2 z 0.9,and ERL versus Pb2þconcentration:R2¼0.92)and well used Archie's law(ERS versus ERW:R2>0.9)indicate that the resistivity can be used to evaluate the stabilization effectiveness.Furthermore,the microscopic results revealed two behaviors,demonstrating the reliability of resistivity:(1)with the hydration process,resistivity increases due to a denser structure and lower amounts of free water and Pb ions,and(2)the addition of Pb reduces resistivity due to its inhibition or even destructive effects on cementation and formation of hydration products.展开更多
Fluidized solidified soil(FSS)is an innovative backfill material that offers benefits such as easy pumping and straightforward construction.This study examined how varying the water-soil ratio and the curing agent dos...Fluidized solidified soil(FSS)is an innovative backfill material that offers benefits such as easy pumping and straightforward construction.This study examined how varying the water-soil ratio and the curing agent dosage affect the properties and microstructure of FSS.The strength development mechanism was investigated when composite solidification agents were used.The findings show that both the water-solid ratio and the curing agent dosage can affect the microstructure of FSS,thereby affecting its performance.When the water-solid ratio increases from 0.52 to 0.56,the unconfined compressive strength(UCS)and flexural strength of the FSS decrease by 34.1% and 39.3% after 28 d.Conversely,the curing agent dosage increasing from 10% to 30% will increase both UCS and flexural strength by 11.2 times and 11.1 times.As the curing age increases,the number of cracks at failure point in the FSS will increase and lead to a more complete failure.Numerous needle-like AFt,C-S-H gel,and C-(A)-S-H gel create a three-dimensional network by adhering to soil particles.展开更多
文摘The investigation of the long-term performance of solidified/stabilized （S/S） contaminated soils was carried out in a trial site in southeast UK. The soils were exposed to the maximum natural weathering for four years and sampled at various depths in a controlled manner. The chemical properties （e.g., degree of carbonation （DOC）, pH, electrical conductivity （EC）） and physical properties （e.g., moisture content （MC）, liquid limit CLL）, plastic limit （PL）, plasticity index （PI）） of the samples untreated and treated with the traditional and accelerated carbonated S/S processes were analyzed. Their variations on the depths of the soils were also studied. The result showed that the broad geotechnical properties of the soils, manifested in their PIs, were related to the concentration of the water soluble ions and in particular the free calcium ions. The samples treated with the accelerated carbonation technology （ACT）, and the untreated samples contained limited number of free calcium ions in solutions and consequently interacted with waters in a similar way. Compared with the traditional cement-based S/S technology, e.g., treatment with ordinary portland cement （OPC） or EnvirOceM, ACT caused the increase of the PI of the treated soil and made it more stable during long-term weathering. The PI values for the four soils ascended according to the order： the EnvirOceM soil, the OPC soil, the ACT soil, and the untreated soil while their pH and EC values descended according to the same order.
基金Foundation item： Projects（41172273, 40802079, 51108288） supported by the National Natural Science Foundation of China Project（KLE-TJGE-B1106） supported by the Opening Fund of Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education （Tongji University）, China
文摘Solidification/stabilization （S/S） is one of the most effective methods of dealing with heavy metal contaminated soils. The effects of cyclic wetting and drying on solidified/stabilized contaminated soils were investigated. A series of test program, unconfined compressive strength （UCS） test, TCLP leaching test and scanning electron microscopy （SEM） test, were performed on lead and zinc contaminated soils solidified/stabilized by fly ash. Test results show that UCS and the leaching characteristics of heavy metal ions of S/S contaminated soils are significantly improved with the increase of fly ash content. UCS of S/S soils firstly increases with the increase of the times of drying and wetting cycles, after reaching the peak, it decreases with it. When the pollutant content is lower （1 000 mg/kg）, the TCLP concentration first slightly decreases under cyclic drying and wetting, then increases, but the change is minor. The TCLP concentration is higher under a high pollutant content of 5 000 mg/kg, and increases with the increase of the times of drying and wetting cycles. The results of scanning electron microscopy （SEM） test are consistent with UCS tests and TCLP leaching tests, which reveals the micro-mechanism of the variations of engineering properties of stabilized contaminated soils after drying and wetting cycles.
基金supported by the Research Grants Council of Hong Kong Special Administrative Region Government of China(Grant No.15210322)The National Natural Science Foundation of China(Grant No.42125701)is greatly appreciatedThe authors also acknowledge Research Centre for Resources Engineering towards Carbon Neutrality(Grant No.BBEJ)of Hong Kong Polytechnic University.
文摘This study aims to evaluate the possibility of reusing treated marine clayey soils by stabilization/solidification(S/S)technology as geomaterial in reclamation projects from the aspects of engineering strength,chemical modification and environmental risk assessment.The lime-activated incinerated sewage sludge ash(ISSA)together with ground granulated blast furnace slag(GGBS)was employed as the binder.The multi-controlling factors including water content,curing time,salinity,and chemical compositions of mixing solution were taken into account to identify the S/S treated Hong Kong marine deposit(HKMD)slurry based on the strength tests,pH measurement,thermo-gravimetric(TG)analysis,X-ray diffractometer(XRD),Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy coupled with energy-dispersive spectrometry(SEM-EDS)and toxicity characteristic leaching procedure(TCLP)tests,etc.The results show that the S/S treatment using lime-activated ISSA-GGBS can effectively enhance the strength of marine soil at the initial water content of 110%and 200%.The water content and curing time have a significant impact on the S/S treated HKMD.The pH of treated soils is higher than 11.1,which proves an alkaline environment for the reactions in the treated soil.A special case is the treated HKMD at 200%water content hydrated by MgCl_(2)solution,which has a low pH of 10.23 and maintains a slurry state.Based on the TCLP results,the leaching concentration of heavy metals from S/S treated HKMD is environmentally safe and meets Hong Kong standard for reusing treated soil with a low level of<0.2 mg/L.The content of main products such as calcium/magnesium silicate hydrate,ettringite or Friedel's salt depends on the chemical additions(e.g.distilled water,seawater,NaCl and Na_(2)SO_(4)).The products in the specimens mixed with MgCl_(2)solutions are mainly composed of Mg(OH)_(2),M-S-H and MgCO_(3),which is distinct with the neoformations in the other cases.Therefore,this study proves that the S/S treated soil slurry could be reused as geomaterials in reclamation projects,and the S/S process is greatly affected by water content,curing time and solution compositions,etc.
基金the National Key Research and Development Program of China(Grant No.2022YFB3404201)the National Natural Science Foundation of China(Grant Nos.52175335,52405342)+1 种基金the Natural Science Foundation Joint Foundation of Liaoning province(Grant No.2023-B SB A-108)the Fundamental Research Funds for the Central Universities(Grant No.N2402005)。
文摘The effects of the high pressure die casting(HPDC)processes on porosity,microstructure,and mechanical properties of heat-treatment-free aluminum silicon(Al-Si)alloys have long been a focal point in automotive die-casting research.In this work,the combined effect of shot sleeve materials and slow shot speeds on porosity,microstructure and mechanical properties of a newly designed HPDC Al-Si alloy was investigated.Results show that employing a ceramic shot sleeve or increasing the slow shot speed significantly reduces both the average size and area fraction of externally solidified crystals(ESCs),as well as the average pore size and volume fraction.When the slow shot speed is increased from 0.05 m·s^(-1)to 0.1 m·s^(-1),the pore volume fraction decreases by 10.2%in steel-shot-sleeve samples,compared to a substantial 67.1%reduction in ceramic-shot-sleeve samples.At a slow shot speed of 0.1 m·s^(-1),castings produced with a ceramic shot sleeve exhibit superior mechanical properties:8.3%higher yield strength,17.4%greater tensile strength,and an 81.4%improvement in elongation,relative to those from a steel shot sleeve.These findings provide valuable insights for minimizing porosity and coarse ESCs in die castings,offering promising potential for broader industrial applications.
基金supported by the National Natural Science Foundation of China(No.52374121)the Henan Province Science and Technology Research and Development Joint Fund,China(No.235200810016)the National Key Research and Development Program,China(No.2023YFC2907203).
文摘Rapid industrialization in China has caused significant environmental challenges,particularly heavy metal pollution from mine tailings.Toxic heavy metals such as lead(Pb),cadmium(Cd),and mercury(Hg)are released during the processing of mining wastewater and leaching of mine tailings.Owing to their excellent physicochemical properties,cementitious materials are widely used for the solidification/stabilization of heavy metals,immobilizing heavy metals via two distinct mechanisms.Physically,their favorable characteristics,including high mechanical strength,low porosity,and durable matrix,create effective barriers.Chemically,the alkaline environment facilitates the precipitation of metal hydroxides/carbonates.Conversely,hydration products(calcium silicate hydrate gels and ettringite)contribute to immobilization through adsorption and physical encapsulation.This study systematically investigated the migration mechanisms of heavy metal contaminants in mine tailings;further,it elucidated the multifaceted immobilization pathways of cementitious materials,which involve synergistic adsorption,precipitation,and encapsulation by hydration products combined with homocrystalline substitution.A comprehensive analysis indicated that cementitious materials significantly reduced the mobility and bioavailability of heavy metals.Nonetheless,their long-term stability and potential environmental impact require further investigation.This study aims to provide theoretical support for environmental management and sustainable resource utilization,and to explore the broader application potential of cementitious technology for heavy metal stabilization,thereby establishing a theoretical foundation for future research on heavy metals in low-cement solidified/stabilized tailings.
基金Funded by the National Nature Science Foundation of China(Nos.51978439,52278269,52278268,and 52108238)the Tianjin Outstanding Young Scholars Science Fund Project(No.22JCJQJC00020)the State Key Laboratory of Green Building Materials Open Foundation(No.2021GBM08)。
文摘We examined the enhancing effects of different dosages of product of Centrifugation of Bacterial Liquid(product of CBL)on the performance of slag-fGD gypsum-cement-bentonite-sludge system using MICP technology.We analyzed the multifaceted performance of the solidified sludge from macroscopic and microscopic perspectives.The experimental results reveal that the increase in product of CBL dosage results in positive impacts on the solidified sludge,including higher side compressive strength,lower leachate heavy metal concentration,and improved crack repair rates.At a 0.4%product of CBL doping concentration,the strength of the solidified sludge is enhanced by 26.6%at 3 d,61.2%at 7 d,and 13.9%at 28 d when compared to the unmodified solidified sludge.After 28 days,the concentrations of Zn and Cu ions reduce by 58%and 18%,respectively,and the crack repair rate is 58.4%.These results demonstrate that the increase in heavy metal concentration in the leachate leads to an increase in the strength of the solidified sludge.The strengthening procedure heavily relies on the mineralisation reaction of Bacillus pasteurii,which produces a substantial amount of CaCO_(3)to cement the particles and fill the pores initially.The modified solidifying sludge exhibits a self-repairing effect and an enhanced multifaceted performance as a result of oxygen being restored after crack formation and reactivation of Bacillus pasteurii.Such conditions facilitate the body's recovery.
文摘A rapidly solidified Al-2.5Ti-2.5Fe-2.5Cr (mass fraction in percent) alloywas prepared by melt spinning. As-quenched and as-annealed microstructures were studied by X-raydiffractometry (XRD), transmission electron microscopy (TEM), high-resolution transmission electronmicroscopy (HREM) and energy dispersive spectrum (EDS) analysis. The microhardness of the alloy atdifferent annealing temperatures was measured. The results obtained indicate that the microhardnessof the rapidly solidified Al-2.5Ti-2.5Fe-2.5Cr alloy does not vary with different annealingtemperatures. The as-quenched microstructure of the alloy includes two kinds of dispersed primaryphases: Al_3Ti and Al_(13)(Cr, Fe)_2. After annealing at 400 deg C for 10 h, the stable phaseAl_(13)Fe_4 appears in the microstructure.
文摘The rapidly solidified powder of AlFeCrZrVSi aluminum alloy was prepared using multistage atomization and consolidated by hotextrusion, the evolution of microstructure of the extruded materials during thermal exposure was studied with optical microscope, Xray diffraction and transmission electron microscope(TEM). The results show that the majority of dispersions present in the asextruded alloy are metastable Al12(Fe, Cr, V)3Si, which has excellent thermaldynamical stability and coarsening resistance; the coarsening ratecontrolling process of the Al12(Fe, Cr, V)3Si phase is considered to be diffusion of Fe atom along grain boundaries instead of bulk diffusion of Fe atom.
基金financially supported by the Fundamental Research Funds for the Central Universities (No. N100602011)the National Natural Science Foundation of China (No. 51104039)+4 种基金the National Key Basic Research Program of China (No. 2012CB626812)the Program for New Century Excellent Talents in University (No. NCET-11-0077)Liaoning Provincial Natural Science Foundation of China (No. 201102062)Liaoning Provincial Science and Technology Plan (No. 2012221013)the National Innovation Experiment Program for University Students
文摘As the raw materials in the post process of rolling and heat treatment, ingots have great effects on the properties of the final products. Inclusions and solidification structures are the most important aspects of the quality of ingots. Niobium and titanium are usually used to react with carbon and nitrogen to improve the properties of ferritic stainless steels. In this research, combined with thermodynamic calculation, effects of niobium and titanium on the inclusions and solidification structures in three kinds of high pure ferritic stainless steels with different titanium additions were investigated by optical microscope（OM）, scanning electron microscope（SEM）, transmission electron microscope（TEM）, and energy disperse spectrometer（EDS）. Results show that Al2O3 and a few（Nb,Ti）N particles form when titanium addition is 0.01 %.Furthermore, inclusions are mainly Ti N and Al2O3–Ti Ox–Ti N duplex inclusions when titanium addition is more than0.10 %. Those two types of inclusions are in well distribution, and can afford nuclei to the solidification process.Therefore, the ratio of equiaxed zone increases with the increase of titanium addition. The ratio increases from42.1 % to 64.0 % with the titanium addition increasing from 0.01 % to 0.10 %, and it increases to 85.7 % when the titanium addition reaches 0.34 %.
基金financially supported by the National Natural Science Foundation of China(Nos.52175284 and 52474396)the National Key Research and Development Program of China(No.2022YFB3404201)。
文摘High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile industry.Mg can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress arouses the deformation of large integrated die-castings.Herein,the development of non-heat treatment Al alloys is becoming the hot topic.In addition,HPDC contains externally solidified crystals(ESCs),which are detrimental to the mechanical properties of castings.To achieve high strength and toughness of non-heat treatment die-casting Al-Si alloy,we used AlSi9Mn alloy as matrix with the introduction of Zr,Ti,Nb,and Ce.Their influences on ESCs and mechanical properties were systematically investigated through three-dimensional reconstruction and thermodynamic simulation.Our results reveal that the addition of Ti increased ESCs'size and porosity,while the introduction of Nb refined ESCs and decreased porosity.Meanwhile,large-sized Al_3(Zr,Ti)phases formed and degraded the mechanical properties.Subsequent introduction of Ce resulted in the poisoning effect and reduced mechanical properties.
基金supported by Fundamental Research Funds for the Central Universities(2023KYJD1008)the Science Research Projects of the Anhui Higher Education Institutions of China(2022AH051582).
文摘Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage poses challenges for the performance and stability of air electrodes.In this work,a novel high-entropy perovskite oxide La_(0.2)Pr_(0.2)Gd_(0.2)Sm_(0.2)Sr_(0.2)Co_(0.8)Fe_(0.2)O_(3−δ)(HE-LSCF)is proposed and investigated as an air electrode in RSOC.The electrochemical behavior of HE-LSCF was studied as an air electrode in both fuel cell and electrolysis modes.The polarization impedance(Rp)of the HE-LSCF electrode is only 0.25Ω·cm^(2) at 800℃ in an air atmosphere.Notably,at an electrolytic voltage of 2 V and a temperature of 800℃,the current density reaches up to 1.68 A/cm^(2).The HE-LSCF air electrode exhibited excellent reversibility and stability,and its electrochemical performance remains stable after 100 h of reversible operation.With these advantages,HE-LSCF is shown to be an excellent air electrode for RSOC.
基金Project supported by the National Natural Science Foundation of China （Grant No 50271057）.
文摘With the multiphase field method, the stability of lamellar basic state is investigated during the directional solidification of eutectic alloy CBr4-C2Cl6. A great number of lamellar patterns observed in experiments are simulated, and a stability diagram for lamellar pattern selections is presented. The simulated growth behaviours of these patterns are found to be qualitatively consistent with Karma et al＇s numerical calculations and experimental results. The formation of the primary instability is attributed to the destabilization of solute boundary layer.
文摘Rapidly solidified Al92.3Fe4.3V0.7Si1.7Mm1.0 alloy has been studied by positron lifetime spectroscopy and the variations on the intedecial defects with the annealing temperature were revealed by an analysis of the lifetime results. The intedece characteristics derived from the positron-lifetime results could be used to give a satisfactory interpretation of the dependence of mechanical properties on the annealing temperature
基金the W.M.Keck Center for Nano-Scale Imaging in the Department of Chemistry and Biochemistry at the University of Arizona(Grant No.RRID:SCR_022884),with funding from the W.M.Keck Foundation Grant.
文摘Approximately 3.44 billion tons of copper mine tailings(MT)were produced globally in 2018 with an increase of 45%from 2010.Significant efforts are being made to manage these tailings through storage facilities,recycling,and reuse in different industries.Currently,a large portion of tailings are managed through the tailing storage facilities(TSF)where these tailings undergo hydro-thermal-mechanical stresses with seasonal cycles which are not comprehensively understood.This study presents an investigative study to evaluate the performance of control and cement-stabilized copper MT under the influence of seasonal cycles,freeze-thaw(F-T)and wet-dry(W-D)conditions,representing the seasonal variability in the cold and arid regions.The control and cement-stabilized MT samples were subjected to a maximum of 12 F-T and 12 W-D cycles and corresponding micro-and-macro behavior was investigated through scanning electron microscope(SEM),volumetric strain(εvT,wet density(r),moisture content loss,and unconfined compressive strength(UCS)tests.The results indicated the vulnerability of Copper MT to 67%and 75%strength loss reaching residual states with 12 F-T and 8 W-D cycles,respectively.Whereas the stabilized MT retained 39%-55%and 16%-34%strength with F-T and W-D cycles,demonstrating increased durability.This research highlights the impact of seasonal cycles and corresponding strength-deformation characteristics of control and stabilized Copper MT in cold and arid regions.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 50201012 and 50471065）.
文摘This paper reports on laser surface remelting experiments performed on a Zn-2wt.%Cu hypoperitectic alloy by employing a 5kW CW CO2 laser at scanning velocities between 6 and 1207mm/s. The growth velocities of the mi- crostructures in the laser molten pool were accurately measured. The planar interface structure caused by the high velocity absolute stability was achieved at a growth velocity of 210 mm/s. An implicit expression of the critical solidification velocity for the cellular-planar transition was carried out by nonlinear stability analyses of the planar interface. The results showed a better agreement with the measured critical velocity than that predicted by M-S theory. Cell-free structures were observed throughout the whole molten pool at a scanning velocity of 652 mm/s and the calculated minimum temperature gradient in this molten pool was very close to the critical temperature gradient for high gradient absolute stability （HGAS） of the η phase. This indicates that HGAS was successfully achieved in the present experiments.
文摘Non-aqueous emulsions have a wide range of applications in cosmetics,drug-controlled release,and the preparation of functional nanoparticles.However,due to the weaker polarity of non-aqueous solvents,these emulsions often exhibit inferior stability compared to their aqueous counterparts.In this experiment,the properties of quaternary ammonium surfactants in glycerol were investigated through surface tension measurements,to further enhance the stability of n-decane/glycerol emulsions,hydrophilic nanoparticles SiO_(2) were modified in situ using double tailed quaternary ammonium surfactants Di-C_(12)DAB and Di-C_(16)DAB.Stable n-decane/glycerol Pickering emulsions were successfully prepared.These emulsions were stable at 45℃for over six months,and no significant changes in droplet size occurred.The minimum droplet size of the emulsion was only 2-3μm.Contact angle measurements showed that the wettability of the silica surface was tremendously affected by the concentration and the alkyl chain length of the double-tailed surfactants.In the presence of Di-C_(12)DAB,the contact angle of glycerol on the silica surface increased monotonically with the surfactant concentration.This explains the phenomenon that the Pickering emulsions containing Di-C_(12)DAB and silica particles were stable within the contact angle range of 80°-120°.Comparatively,the contact angle of the glycerol on the silica surface in the presence of Di-C_(16)DAB first increased with surfactant concentrations and then decreased,reaching a maximum at 0.6 mmol/L.It can be concluded that Di-C_(12)DAB formed monolayers at the surface of silica particles within all investigated concentrations.On the contrary,Di-C_(16)DAB formed monolayers at concentrations below 0.6 mmol/L and formed double layers at concentrations above 0.6 mmol/L,leading to a non-monotonic change in the contact angle with respect to concentration.Using these stable non-aqueous Pickering emulsions as templates,polymer microspheres with a particle size of 2-3μm were successfully prepared with high yield.This work is helpful to expand the potential applications of non-aqueous emulsions in the encapsulation of drug,controlled release,material preparation,and cosmetic formulations.
基金funded by the Natural Science Foundation of Inner Mongolia Autonomous Region(2023JQ03,2023QN05014)the Youth Science and Technology Talents Project of Autonomous Region Colleges and Universities(NJYT22108)。
文摘Loess slopes in cold and arid regions are susceptible to shallow soil degradation,which may trigger severe environmental problems related to soil erosion.To address this environmental challenge,this study selected a compound ecological curing agent composed of gellan gum and guar gum for stabilizing shallow loess slopes.Triaxial compression and disintegration tests were employed to comparatively analyze the effects of compound gum content,mass mix ratio,and curing age on the mechanical and disintegration properties of solidified loess.The curing mechanism was analyzed using scanning electron microscopy(SEM),and the ecological protection effect was monitored for a 60-day period.The results indicate that gellan gum,guar gum,and the compound gum can enhance the mechanical and disintegration properties of loess,promote plant growth,and optimize the ecological environment.However,the combination of gellan gum and guar gum proves more effective than using either gellan gum or guar gum alone.Considering the effects on mechanical properties,disintegration performance,and material economy,the disintegration rate of loess decreases by 75.72%compared to plain loess when the compound glue content is 0.5%,the mixing ratio of gellan gum to guar gum is 3:7 and the curing age is 7 days.Meanwhile,the cohesion and internal friction angle increase by 118.06%and 10.97%,respectively.Moreover,the disintegration performance and mechanical properties of the samples first increase and then decrease with the increase in compound glue and the mix ratio and are basically stabilized after the curing age reaches 7d.
基金supported by the National Key R&D Program of China(Grant No.2022YFC3901204)the Foundation for Distinguished Young Scholars of Hubei Province,China(Grant No.2021CFA096)the National Natural Science Foundation of China(Grant No.U20A20320).
文摘Evaluating the stabilized lead(Pb)-contaminated soils through sampling and laboratory testing involves costly and time-consuming processes.Therefore,this study employed a low-cost and non-destructive resistivity tool to evaluate the Pb-contaminated soils stabilized by electrolytic manganese residue(EMR)-based geopolymer(EG-OPC)from the strength and environmental benefits perspective.First,unconfined compressive strength(UCS)and leaching tests were conducted to study the stabilization effectiveness of EG-OPC.Results indicated that the UCS values of soil(5000 mg/kg of pollutants)stabilized by 20%EG-OPC were 4.87 MPa and 8.13 MPa after 7 d and 60 d of curing,respectively.After 60 d of curing,the Pb concentration in the leachate reached 44 mg/L,far lower than the control group(321 mg/L).Second,soil,pore water,and leachate resistivity(ERS,ERW,and ERL)were measured to establish fitting relationships with strength parameters and pollution risk.The good fitting results(e.g.ERS/ERW versus UCS/secant modulus(E50):correlation coefficient R2 z 0.9,ERS/ERW versus Pb contents:R2 z 0.9,and ERL versus Pb2þconcentration:R2¼0.92)and well used Archie's law(ERS versus ERW:R2>0.9)indicate that the resistivity can be used to evaluate the stabilization effectiveness.Furthermore,the microscopic results revealed two behaviors,demonstrating the reliability of resistivity:(1)with the hydration process,resistivity increases due to a denser structure and lower amounts of free water and Pb ions,and(2)the addition of Pb reduces resistivity due to its inhibition or even destructive effects on cementation and formation of hydration products.
基金Funded by the China Construction Shares Technology Research and Development Project(No.CSCEC-2023-Z-07)CSCEC Strait Major Scientific and Technological Project(No.ZJHX2023C001)+1 种基金Engineering Research Center of Prevention and Control of Geological Disasters in the Mountainous Areas of Northern Fujian,Fujian Province University,China(No.WYERC2024-3)Science s of Fujian Province(No.2023J01476)。
文摘Fluidized solidified soil(FSS)is an innovative backfill material that offers benefits such as easy pumping and straightforward construction.This study examined how varying the water-soil ratio and the curing agent dosage affect the properties and microstructure of FSS.The strength development mechanism was investigated when composite solidification agents were used.The findings show that both the water-solid ratio and the curing agent dosage can affect the microstructure of FSS,thereby affecting its performance.When the water-solid ratio increases from 0.52 to 0.56,the unconfined compressive strength(UCS)and flexural strength of the FSS decrease by 34.1% and 39.3% after 28 d.Conversely,the curing agent dosage increasing from 10% to 30% will increase both UCS and flexural strength by 11.2 times and 11.1 times.As the curing age increases,the number of cracks at failure point in the FSS will increase and lead to a more complete failure.Numerous needle-like AFt,C-S-H gel,and C-(A)-S-H gel create a three-dimensional network by adhering to soil particles.
