The solid/liquid interface of a directionally solidified Ni-base superalloy with different phosphorus contents was quantitatively described by means of fractat method.When the solidification rate was fixed,the relatio...The solid/liquid interface of a directionally solidified Ni-base superalloy with different phosphorus contents was quantitatively described by means of fractat method.When the solidification rate was fixed,the relationship between the fractal dimensionality of the solid/liquid interface and the phos- phorus content of the test alloy was given.Combined the thermodynamics and fractal theory,the ef- fect mechanism of phosphorus content on fractal dimensionality of the solid/liquid interface was discussed.展开更多
A modified Bridgman directional solidification technique was used to prepare Fe-Al-Ta eutectic in situ composites at different growth rates ranging from 6 to 80 μm/s. The directionally solidified FeAl-Ta eutectic com...A modified Bridgman directional solidification technique was used to prepare Fe-Al-Ta eutectic in situ composites at different growth rates ranging from 6 to 80 μm/s. The directionally solidified FeAl-Ta eutectic composites are composed of two phases: Fe（Al,Ta） matrix phase, and Fe2 Ta（Al） Laves phase. Solidification microstructure is affected by solidification rate. Microstructure of the Fe-Al-Ta eutectic alloy grown at 6.0 μm/s is broken-lamellar eutectic. Eutectic colonies are formed with the increase of the solidification rate. Microstructures are mainly composed of the lamellar or fibrous eutectic at the center of the colony and coarse lamellar eutectic zone at the boundary. Meanwhile, the inter-lamellar spacing（or the inter-rod spacing） is decreased. The spacing adjustments are also observed in Fe-Al-Ta eutectic alloy. The solid/liquid interface evolves from planar interface to shallow cellular interface, then to deep cellular, and finally to shallow cellular planar with the increase of the solidification rate.展开更多
Although surface-enhanced Raman spectroscopy(SERS)has been applied for gathering fingerprint information,even in single molecule analysis,the decayed Raman signals in aqueous solutions largely obstruct the on-site ins...Although surface-enhanced Raman spectroscopy(SERS)has been applied for gathering fingerprint information,even in single molecule analysis,the decayed Raman signals in aqueous solutions largely obstruct the on-site insight reaction process.In this study,large-scaled semiconductor films with multi-walled(TiO_(2)/WO_(3)/TiO_(2))nanopore distribution are fabricated by combining electrochemical anodization and sputtering technique,and then employed as the SERS substrates for detection of molecules at the solid/liquid interfaces.Given the remarkably improved electrochromic property of the multi-walled film,such SERS substrates were endowed with tunable oxygen vacancy(VO)density and distribution via simply applying electrochemical bias voltage,which enabled one to achieve an enhanced charge transfer efficiency and thus a remarkably increased Raman signal even in solution.The VO-rich SERS substrate is highly repeatable,thus providing a reliable platform for in-situ monitoring of the target molecules or intermediates at the solid/liquid interfaces.展开更多
We study the effects of gas adsorption on the dynamics and stability of nanobubbles at the solid–liquid interface. The phase diagram and dynamic evolution of surface nanobubbles were analyzed under varying equilibriu...We study the effects of gas adsorption on the dynamics and stability of nanobubbles at the solid–liquid interface. The phase diagram and dynamic evolution of surface nanobubbles were analyzed under varying equilibrium adsorption constant.Four distinct dynamic behaviors appear in the phase diagram: shrinking to dissolution, expanding to bursting, shrinking to stability, and expanding to stability. Special boundary states are identified in phase diagram, where the continuous growth of nanobubbles can take place even under very weak gas–surface interaction or with very small initial bubble size. Surface adsorption plays a critical role in the stability, lifetime, radius, and contact angle of nanobubbles, thereby demonstrating that pinning is not a prerequisite for stabilization. Furthermore, stable equilibrium nanobubbles exhibit a characteristic range of footprint radius, a limited height, and a small contact angle, consistent with experimental observations.展开更多
Silicon is considered one of the most promising candidates for incorporation into carbon-based anodes in lithium-ion batteries(LIBs)due to its high specific capacity.However,the significant volume changes during charg...Silicon is considered one of the most promising candidates for incorporation into carbon-based anodes in lithium-ion batteries(LIBs)due to its high specific capacity.However,the significant volume changes during charge and discharge cycles lead to repeated reconstruction of the solid electrolyte interface(SEI)film and continuous loss of active lithium.Pre-lithiation method is regarded as a highly attractive approach for effectively compensating for active lithium loss during the charge and discharge cycles of LIBs.Constructing a stable SEI film is particularly crucial in the pre-lithiation process.In this study,we developed a direct contact pre-lithiation(DC-Pr)method to create a temperature-tailored robust SEI film interface on silicon-carbon(Si@C)electrodes.By investigating the morphology,structure,and composition of the SEI formed on Si@C electrodes at different pre-lithiation temperatures(50,25,0,and-25℃),we demonstrated that controlling the lithiation temperature to regulate the migration rate of lithium ions within the Si@C electrode yields a lithiated Si@C anode(25-Pr-Si@C)at 25℃ with a continuous,uniform SEI film(~3.65 nm)enriched with Li_(2)O-LiF,which exhibits synergistic effects.Importantly,the initial Coulombic efficiency(ICE)of 25-Pr-Si@C significantly improved from 85.4% in the unlithiated Si@C electrode(Blank-Si@C)to 106.1%.Additionally,the full cell configuration using a high areal loading of lithiated Si@C(~5.5 mA h cm^(-2))as the anode and NCM811 as the cathode(NCM811||25-Pr-Si@C)demonstrated superior cycling performance,maintaining 69.4% of capacity retention and achieving a Coulombic efficiency of over 99.7% after 150 cycles(0.5 C).Therefore,this simple and efficient experimental design provides a high-performance,controllable,and scalable pre-lithiation method for LIBs,paving the way for the commercialization of LIBs utilizing pre-lithiation techniques.展开更多
Halide solid-state electrolytes(SSEs)have become a new research focus for all-solid-state batteries because of their significant safety advantages,high ionic conductivity,high-voltage stability,and good ductility.None...Halide solid-state electrolytes(SSEs)have become a new research focus for all-solid-state batteries because of their significant safety advantages,high ionic conductivity,high-voltage stability,and good ductility.Nonetheless,stability issues are a key barrier to their practical application.In past reports,the analysis of halide electrolyte stability and its enhancement methods lacked relevance,which limited the design and optimization of halide solid electrolytes.This review focus on stability issues from a chemical,electrochemical,and interfacial point of view,with particular emphasis on the interaction of halide SSEs with anode and cathode interfaces.By focusing on innovative strategies to address the stability issue,this paper aims to further deepen the understanding and development of halide all-solid-state batteries by proposing to focus research efforts on improving their stability in order to address their inherent challenges and match higher voltage cathodes,paving the way for their wider application in the next generation of energy storage technologies.展开更多
All-solid-state batteries(ASSBs)assembled with sulfide solid electrolytes(SSEs)and nickel(Ni)-rich oxide cathode materials are expected to achieve high energy density and safety,representing potential candidates for t...All-solid-state batteries(ASSBs)assembled with sulfide solid electrolytes(SSEs)and nickel(Ni)-rich oxide cathode materials are expected to achieve high energy density and safety,representing potential candidates for the next-generation energy storage systems.However,interfacial issues between SSEs and Nirich oxide cathode materials,attributed to space charge layer,interfacial side reactions,and mechanical contact failure,significantly restrict the performances of ASSBs.The interface degradation is closely related to the components of the composite cathode and the process of electrode fabrication.Focusing on the influencing factors of interface compatibility between SSEs and Ni-rich oxide cathode,this article systematically discusses how cathode active materials(CAMs),electrolytes,conductive additives,binders,and electrode fabrication impact the interface compatibility.In addition,the strategies for the compatibility modification are reviewed.Furthermore,the challenges and prospects of intensive research on the degradation and modification of the SSE/Ni-rich cathode material interface are discussed.This review is intended to inspire the development of high-energy-density and high-safety all-solid-state batteries.展开更多
The oviduct epithelium is the initial maternal contact site for embryos after fertilization,offering the microenviron-ment before implantation.This early gestation period is particularly sensitive to stress,which can ...The oviduct epithelium is the initial maternal contact site for embryos after fertilization,offering the microenviron-ment before implantation.This early gestation period is particularly sensitive to stress,which can cause reduced fertil-ity and reproductive disorders in mammals.Nevertheless,the local impact of elevated stress hormones on the ovi-duct epithelium has received limited attention to date,except for a few reports on polyovulatory species like mice and pigs.In this study,we focused on the effects of chronic maternal stress on cattle,given its association with infertil-ity issues in this monoovulatory species.Bovine oviduct epithelial cells(BOEC)differentiated at the air–liquid interface(ALI)were stimulated with 250 nmol/L cortisol for 1 or 3 weeks.Subsequently,they were assessed for morphology,bioelectrical properties,and gene expression related to oviduct function,glucocorticoid pathway,cortisol metabo-lism,inflammation,and apoptosis.Results revealed adverse effects of cortisol on epithelium structure,featured by deciliation,vacuole formation,and multilayering.Additionally,cortisol exposure led to an increase in transepithelial potential difference,downregulated mRNA expression of the major glucocorticoid receptor(NR3C1),upregulated the expression of cortisol-responsive genes(FKBP5,TSC22D3),and significant downregulation of oviductal glycopro-tein 1(OVGP1)and steroid receptors PGR and ESR1.The systematic comparison to a similar experiment previously performed by us in porcine oviduct epithelial cells,indicated that bovine cultures were more susceptible to elevated cortisol levels than porcine.The distinct responses between both species are likely linked to their divergence in the cortisol-induced expression changes of HSD11B2,an enzyme controlling the cellular capacity to metabolise cortisol.These findings provide insights into the species-specific reactions and reproductive consequences triggered by maternal stress.展开更多
The large-scale commercialization of proton exchange membrane fuel cells(PEMFCs)has been hindered by the high demand of platinum(Pt)in the cathode due to the sluggish kinetics of the oxygen reduction reaction.Reducing...The large-scale commercialization of proton exchange membrane fuel cells(PEMFCs)has been hindered by the high demand of platinum(Pt)in the cathode due to the sluggish kinetics of the oxygen reduction reaction.Reducing the amount of Pt would worsen the problems caused by the adsorption of perfluorinated sulfonic acid(PFSA)ionomers to Pt via the side chains,namely,blocking the active sites of Pt and inducing densely packed layers of fluorocarbon backbones on Pt surface to obstruct local O_(2)transport at the Pt/PFSA interfaces.This work aims at optimizing the Pt/ionomer interface to mitigate the sulfonate adsorption and in the meantime to reduce the local O_(2)transport resistance(R_(local)),by using a porous composite of 1-butyl-3-methylimidazolium hydrogen sulfate ionic liquid(IL)modified MOF-808(BMImHSO_(4)@MOF-808)as additive in cathodic catalyst layer(CCL).Through detailed physical,spectroscopic and electrochemical characterizations,we demonstrate a three-fold optimization mechanism of Pt/ionomer interface structure by BMImHSO_(4)@MOF-808:the unsaturated metal sites in MOF-808 effectively inhibit the sulfonate adsorption on Pt through coordination with the sulfonates of PFSA,thereby improving catalyst utilization;the pores in MOF-808 establish efficient transport channels for gaseous oxygen,significantly reducing R_(local);the IL modification layers facilitate the formation of continuous proton transport networks,increasing proton conductivity.The incorporation of BMImHSO_(4)@MOF-808 in a low-Pt CCL(0.1 mg_(Pt)cm^(-2))yields a peak power density of 1.9 W cm^(-2)for PEMFC under H_(2)-O_(2)condition,and ca.20%increase of power density under H_(2)-air condition as compared with conventional CCL,indicating the prospect of IL-MOF composites as an efficient additive to enhance the performance of PEMFCs.展开更多
Metal-carbon dioxide(CO_(2))batteries hold great promise for reducing greenhouse gas emissions and are regarded as one of the most promising energy storage techniques due to their efficiency advantages in CO_(2)recove...Metal-carbon dioxide(CO_(2))batteries hold great promise for reducing greenhouse gas emissions and are regarded as one of the most promising energy storage techniques due to their efficiency advantages in CO_(2)recovery and conversion.Moreover,rechargeable nonaqueous metal-CO_(2)batteries have attracted much attention due to their high theoretical energy density.However,the stability issues of the electrode-electrolyte interfaces of nonaqueous metal-CO_(2)(lithium(Li)/sodium(Na)/potassium(K)-CO_(2))batteries have been troubling its development,and a large number of related research in the field of electrolytes have conducted in recent years.This review retraces the short but rapid research history of nonaqueous metal-CO_(2)batteries with a detailed electrochemical mechanism analysis.Then it focuses on the basic characteristics and design principles of electrolytes,summarizes the latest achievements of various types of electrolytes in a timely manner and deeply analyzes the construction strategies of stable electrode-electrolyte interfaces for metal-CO_(2)batteries.Finally,the key issues related to electrolytes and interface engineering are fully discussed and several potential directions for future research are proposed.This review enriches a comprehensive understanding of electrolytes and interface engineering toward the practical applications of next-generation metal-CO_(2)batteries.展开更多
The reversibility and stability of aqueous Zn metal batteries(AZMBs)are largely limited by Zn dendrites and interfacial parasitic reactions.Herein,we propose a parallel modulation strategy to boost the reversibility o...The reversibility and stability of aqueous Zn metal batteries(AZMBs)are largely limited by Zn dendrites and interfacial parasitic reactions.Herein,we propose a parallel modulation strategy to boost the reversibility of the Zn anode by introducing N,N,N',N'-tetramethylchloroformamidinium hexafluorophosphate(TCFH)as an additive in the electrolyte.TCFH is composed of PF6-and TN+with opposite charges.PF6-can spontaneously induce the in-situ generation of ZnF_(2)solid electrolyte interface(SEI)on the anode,which can improve the transport kinetics of Zn^(2+)at the interface,thus promoting the rapid and uniform deposition of Zn as well as inhibiting the growth of dendrites.In addition,TN+is enriched at the anode surface during Zn deposition through the anchoring effect,which brings a reconfiguration of the ion/molecule distribution.The anchored-TN+reduces the concentrations of H_(2)O and SO_(4)^(2-),sufficiently restraining the parasitic reaction.Thanks to the dual-phase interface engineering constructed of PF6-and TN+in parallel,the symmetric cell with the proposed electrolyte survives long cycling stability over750 h at 20 mA cm^(-2),10 mAh cm^(-2).This study offers a distinct viewpoint to the multidimensional optimization of Zn anodes for high-performance AZMBs.展开更多
All-solid-state sodium(Na)-metal batteries(ASSSMBs)are considered promising candidates for large-scale energy storage systems due to their abundant sodium resources,unparalleled safety performance,and impressive energ...All-solid-state sodium(Na)-metal batteries(ASSSMBs)are considered promising candidates for large-scale energy storage systems due to their abundant sodium resources,unparalleled safety performance,and impressive energy density.Na superionic conductors(NASICONs)are among the best enablers of ASSSMBs in view of their high ionic conductivity,ease of synthesis,and excellent thermal stability and good electrochemical/chemical compatibility with common electrodes.However,challenges surrounding the NASICON/electrode interface,such as high interfacial resistance and dendrite formation,have hindered the development of practical ASSSMBs based on NASICONs.This review starts with an explicit summary of the interface problems between the metallic Na anode and NASICON arising from mechanical,chemical,and electrochemical aspects(i.e.,poor interface contact,insulating side-reaction products,and irregular dendrite growth).Subsequently,we systematically analyze and logically categorize modification strategies for addressing anode interface problems and provide a comprehensive discussion on the underlying enhancement mechanisms.As such,we identify underlying and universal interface enhancement mechanisms by comparatively studying various modification strategies.Furthermore,we briefly summarize the challenges in the cathode/electrolyte interface and early-stage research efforts in constructing stable cathode/electrolyte interface and fabricating high-performance composite cathodes.Finally,key suggestions and future prospectives for the advancement of NASICON-based ASSSMBs are outlined.展开更多
Solid polymer electrolytes(SPEs)have attracted much attention for their safety,ease of packaging,costeffectiveness,excellent flexibility and stability.Poly-dioxolane(PDOL)is one of the most promising matrix materials ...Solid polymer electrolytes(SPEs)have attracted much attention for their safety,ease of packaging,costeffectiveness,excellent flexibility and stability.Poly-dioxolane(PDOL)is one of the most promising matrix materials of SPEs due to its remarkable compatibility with lithium metal anodes(LMAs)and suitability for in-situ polymerization.However,poor thermal stability,insufficient ionic conductivity and narrow electrochemical stability window(ESW)hinder its further application in lithium metal batteries(LMBs).To ameliorate these problems,we have successfully synthesized a polymerized-ionic-liquid(PIL)monomer named DIMTFSI by modifying DOL with imidazolium cation coupled with TFSI^(-)anion,which simultaneously inherits the lipophilicity of DOL,high ionic conductivity of imidazole,and excellent stability of PILs.Then the tridentate crosslinker trimethylolpropane tris[3-(2-methyl-1-aziridine)propionate](TTMAP)was introduced to regulate the excessive Li^(+)-O coordination and prepare a flame-retardant SPE(DT-SPE)with prominent thermal stability,wide ESW,high ionic conductivity and abundant Lit transference numbers(t_(Li+)).As a result,the LiFePO_(4)|DT-SPE|Li cell exhibits a high initial discharge specific capacity of 149.60 mAh g^(-1)at 0.2C and 30℃with a capacity retention rate of 98.68%after 500 cycles.This work provides new insights into the structural design of PIL-based electrolytes for long-cycling LMBs with high safety and stability.展开更多
The non-aqueous solid-liquid biphasic solvent of 2-amino-2-methyl-1-propanol(AMP)/piperazine(PZ)/dipropylene glycol dimethyl ether(DME)features a high CO_(2)absorption loading,favorable phase separation behavior and h...The non-aqueous solid-liquid biphasic solvent of 2-amino-2-methyl-1-propanol(AMP)/piperazine(PZ)/dipropylene glycol dimethyl ether(DME)features a high CO_(2)absorption loading,favorable phase separation behavior and high regeneration efficiency.Different with the liquid-liquid phase change solvent,the reaction kinetics of CO_(2)capture into solid-liquid biphasic solvent was rarely studied.In the present work,the reaction kinetics of CO_(2)absorption into AMP/PZ/DME solid-liquid biphasic solvent was investigated into the double stirred kettle reactor.The absorption reaction followed a pseudo-first-order kinetic model according to the zwitterion mechanism.The overall reaction rate constant(kov)and the enhancement factor(E)of CO_(2)absorption both increased with increasing temperature.The total mass transfer resistance of the absorbent decreased with increasing temperature and increased with increasing absorption loading,so the higher reaction temperature was conducive to the absorption,and the liquid phase mass transfer resistance was the main factor affecting the absorption rate.展开更多
MgH_(2) and TiH_(2) have been extensively studied as potential anode materials due to their high theoretical specific capacities of 2036 and 1024 mAh/g,respectively.However,the large volume changes that these compound...MgH_(2) and TiH_(2) have been extensively studied as potential anode materials due to their high theoretical specific capacities of 2036 and 1024 mAh/g,respectively.However,the large volume changes that these compounds undergo during cycling affects their performance and limits practical applications.The present work demonstrates a novel approach to limiting the volume changes of active materials.This effect is based on mechanical support from an intimate interface generated in situ via the reaction between MgH_(2) and Ti within the electrode prior to lithiation to form Mg and TiH_(2).The resulting Mg can be transformed back to MgH_(2) by reaction with LiH during delithiation.In addition,the TiH_(2) improves the reaction kinetics of MgH_(2) and enhances electrochemical performance.The intimate interface produced in this manner is found to improve the electrochemical properties of a MgH_(2)-Ti-LiH electrode.An exceptional reversible capacity of 800 mAh/g is observed even after 200 cycles with a high current density of 1 mA/cm^(2) and a high proportion of active material(90 wt.%)at an operation temperature of 120℃.This study therefore showcases a new means of improving the performance of electrodes by limiting the volume changes of active materials.展开更多
Cu/Al clad strips are prepared using solid?liquid cast-rolling bonding(SLCRB)technique with a d160mm×150mm twin-roll experimental caster.The extent of interfacial reactions,composition of the reaction products,an...Cu/Al clad strips are prepared using solid?liquid cast-rolling bonding(SLCRB)technique with a d160mm×150mm twin-roll experimental caster.The extent of interfacial reactions,composition of the reaction products,and their micro-morphology evolution in the SLCRB process are investigated with scanning electron microscope(SEM),energy dispersive spectrometer(EDS),and X-ray diffraction(XRD).In the casting pool,initial aluminized coating is first generated on the copper strip surface,with the diffusion layer mainly consisting ofα(Al)+CuAl2and growing at high temperatures,with the maximum thickness of10μm.After sequent rolling below the kiss point,the diffusion layer is broken by severe elongation,which leads to an additional crack bond process with a fresh interface of virgin base metal.The average thickness is reduced from10to5μm.The reaction products,CuAl2,CuAl,and Cu9Al4,are dispersed along the rolling direction.Peeling and bending test results indicate that the fracture occurs in the aluminum substrate,and the morphology is a dimple pattern.No crack or separation is found at the bonding interface after90°-180°bending.The presented method provides an economical way to fabricate Cu/Al clad strip directly.展开更多
In the past few decades, various surface analysis techniques find wide applications in studies of interfacial phenomena ranging from fundamental surface science,catalysis, environmental science and energy materials.Wi...In the past few decades, various surface analysis techniques find wide applications in studies of interfacial phenomena ranging from fundamental surface science,catalysis, environmental science and energy materials.With the help of bright synchrotron sources, many of these techniques have been further advanced into novel in-situ/operando tools at synchrotron user facilities, providing molecular level understanding of chemical/electrochemical processes in-situ at gas–solid and liquid–solid interfaces.Designing a proper endstation for a dedicated beamline is one of the challenges in utilizing these techniques efficiently for a variety of user's requests. Many factors,including pressure differential, geometry and energy of the photon source, sample and analyzer, need to be optimized for the system of interest. In this paper, we discuss the design and performance of a new endstation at beamline02 B at the Shanghai Synchrotron Radiation Facility for ambient pressure X-ray photoelectron spectroscopy studies.This system, equipped with the newly developed hightransmission HiPP-3 analyzer, is demonstrated to be capable of efficiently collecting photoelectrons up to 1500 eV from ultrahigh vacuum to ambient pressure of 20 mbar.The spectromicroscopy mode of HiPP-3 analyzer also enables detection of photoelectron spatial distribution with resolution of 2.8 ± 0.3 lm in one dimension. In addition,the designing strategies of systems that allow investigations in phenomena at gas–solid interface and liquid–solid interface will be highlighted through our discussion.展开更多
The morphological instability of solid/liquid(S/L)interface during solidification will result in different patterns of microstructure.In this study,two dimension(2 D)and three dimension(3 D)in-situ observation of soli...The morphological instability of solid/liquid(S/L)interface during solidification will result in different patterns of microstructure.In this study,two dimension(2 D)and three dimension(3 D)in-situ observation of solid/liquid interfacial morphology transition in Al-Zn alloy during directional solidification were performed via X-ray imaging.Under a condition of increasing temperature gradient(G),the interface transition from dendritic pattern to cellular pattern,and then to planar growth with perturbation was captured.The effect of solidification parameter(the ratio of temperature gradient and growth velocity(v),G/v)on morphological instabilities was investigated and the experimental results were compared to classical"constitutional supercooling"theory.The results indicate that 2 D and 3 D evolution process of S/L interface morphology under the same thermal condition are different.It seems that the S/L interface in 2 D observation is easier to achieve planar growth than that in 3 D,implying higher S/L interface stability in 2 D thin plate samples.This can be explained as the restricted liquid flow under 2 D solidification which is beneficial to S/L interface stability.The in-situ observation in present study can provide coherent dataset for microstructural formation investigation and related model validation during solidification.展开更多
The liquid/solid(L/S)interface of dissimilar metals is critical to the microstructure,mechanical strength,and structural integrity of interconnects in many important applications such as electronics,automotive,aeronau...The liquid/solid(L/S)interface of dissimilar metals is critical to the microstructure,mechanical strength,and structural integrity of interconnects in many important applications such as electronics,automotive,aeronautics,and astronautics,and therefore has drawn increasing research interests.To design preferential microstructure and optimize mechanical properties of the interconnects,it is crucial to understand the formation and growth mechanisms of diversified structures at the L/S interface during interconnecting.In situ synchrotron radiation or tube-generated X-ray radiography and tomography technologies make it possible to observe the evolution of the L/S interface directly and therefore have greatly propelled the research in this field.Here,we review the recent progress in understanding the L/S interface behaviors using advanced in situ X-ray imaging techniques with a particular focus on the following two issues:(1)interface behaviors in the solder joints for microelectronic packaging including the intermetallic compounds(IMCs)during refl ow,Sn dendrites,and IMCs during solidification and refl ow porosities and(2)growth characteristics and morphological transition of IMCs in the interconnect of dissimilar metals at high temperature.Furthermore,the main achievements and future research perspectives in terms of metallurgical bonding mechanisms under complex conditions with improved X-ray sources and detectors are remarked and discussed.展开更多
The effect of the pulsed magnetic field on the grain refinement of superalloy K4169 has been studied in directional solidification.In the presence of the solid-liquid interface condition,the distributions of the elect...The effect of the pulsed magnetic field on the grain refinement of superalloy K4169 has been studied in directional solidification.In the presence of the solid-liquid interface condition,the distributions of the electromagnetic force,flow field,temperature field,and Joule heat in front of the solid-liquid interface in directional solidification with the pulsed magnetic field are simulated.The calculation results show that the largest electromagnetic force in the melt appears near the solid-liquid interface,and the electromagnetic force is distributed in a gradient.There are intensive electromagnetic vibrations in front of the solid-liquid interface.The forced melt convection is mainly concentrated in front of the solid-liquid interface,accompanied by a larger flow velocity.The simulation results indicate that the grain refinement is attributed to that the electromagnetic vibration and forced convection increase the nucleation rate and the probability of dendrite fragments survival,for making dendrite easily fragmented,homogenizing the melt temperature,and increasing the undercooling in front of the solid-liquid interface.展开更多
文摘The solid/liquid interface of a directionally solidified Ni-base superalloy with different phosphorus contents was quantitatively described by means of fractat method.When the solidification rate was fixed,the relationship between the fractal dimensionality of the solid/liquid interface and the phos- phorus content of the test alloy was given.Combined the thermodynamics and fractal theory,the ef- fect mechanism of phosphorus content on fractal dimensionality of the solid/liquid interface was discussed.
基金Funded by the National Natural Science Foundation of China(No.51201121)2015 Science and Technology Foundation for Selected Overseas Chinese Scholars of Shaanxi Province,Key Industry Innovation Chain(group)Project of Shaanxi Province(No.2019ZDLGY 04-04)International Science+1 种基金Technology Cooperation and Exchange Program of Shaanxi Province(No.2016KW-055)Research Project of Shaanxi Engineering Technology Research Center for Wear-resisting Materials(No.2016NMZX03)
文摘A modified Bridgman directional solidification technique was used to prepare Fe-Al-Ta eutectic in situ composites at different growth rates ranging from 6 to 80 μm/s. The directionally solidified FeAl-Ta eutectic composites are composed of two phases: Fe（Al,Ta） matrix phase, and Fe2 Ta（Al） Laves phase. Solidification microstructure is affected by solidification rate. Microstructure of the Fe-Al-Ta eutectic alloy grown at 6.0 μm/s is broken-lamellar eutectic. Eutectic colonies are formed with the increase of the solidification rate. Microstructures are mainly composed of the lamellar or fibrous eutectic at the center of the colony and coarse lamellar eutectic zone at the boundary. Meanwhile, the inter-lamellar spacing（or the inter-rod spacing） is decreased. The spacing adjustments are also observed in Fe-Al-Ta eutectic alloy. The solid/liquid interface evolves from planar interface to shallow cellular interface, then to deep cellular, and finally to shallow cellular planar with the increase of the solidification rate.
基金supported by National Natural Science Foundation of China(Nos.21874013,22074013 and 22073030)the Fundamental Research Funds for the Central Universities(Nos.N2105018 and N2005027)+1 种基金the China Postdoctoral Science Foundation(No.2019M661109)supported by the Supercomputer Centre of East China Normal University(ECNU Public Platform for Innovation No.001).
文摘Although surface-enhanced Raman spectroscopy(SERS)has been applied for gathering fingerprint information,even in single molecule analysis,the decayed Raman signals in aqueous solutions largely obstruct the on-site insight reaction process.In this study,large-scaled semiconductor films with multi-walled(TiO_(2)/WO_(3)/TiO_(2))nanopore distribution are fabricated by combining electrochemical anodization and sputtering technique,and then employed as the SERS substrates for detection of molecules at the solid/liquid interfaces.Given the remarkably improved electrochromic property of the multi-walled film,such SERS substrates were endowed with tunable oxygen vacancy(VO)density and distribution via simply applying electrochemical bias voltage,which enabled one to achieve an enhanced charge transfer efficiency and thus a remarkably increased Raman signal even in solution.The VO-rich SERS substrate is highly repeatable,thus providing a reliable platform for in-situ monitoring of the target molecules or intermediates at the solid/liquid interfaces.
基金Project supported by the Natural Science Foundation of Guangxi Zhuang Autonomous Region, China (Grant No. 2022GXNSFAA035487)the National Natural Science Foundation of China (Grant Nos. 12272100, 11474285, and 12074382)+2 种基金the Graduate Education Innovation Project of Guangxi Zhuang Autonomous Region, China (Grant No. XJCY2022012)the Guangxi Normal University Ideological and Political Demonstration Course Construction Project (Grant Nos. 2022kcsz15 and 2023kcsz29)the Innovation Project of Graduate Education of Guangxi Zhuang Autonomous Region, China (Grant No. YCBZ2024087)。
文摘We study the effects of gas adsorption on the dynamics and stability of nanobubbles at the solid–liquid interface. The phase diagram and dynamic evolution of surface nanobubbles were analyzed under varying equilibrium adsorption constant.Four distinct dynamic behaviors appear in the phase diagram: shrinking to dissolution, expanding to bursting, shrinking to stability, and expanding to stability. Special boundary states are identified in phase diagram, where the continuous growth of nanobubbles can take place even under very weak gas–surface interaction or with very small initial bubble size. Surface adsorption plays a critical role in the stability, lifetime, radius, and contact angle of nanobubbles, thereby demonstrating that pinning is not a prerequisite for stabilization. Furthermore, stable equilibrium nanobubbles exhibit a characteristic range of footprint radius, a limited height, and a small contact angle, consistent with experimental observations.
基金the financial support from the Shanghai Oriental Talent Program(QNDS2024007)On-Campus Scene Verification Project of Tongji University(kh0170020242359)+4 种基金Shanghai Research Institute of China Shenhua Coal-to-Liquids Chemical Co.,Ltd.the National Natural Science Foundation of China(52307249)National Science Foundation of Shanghai Province(23ZR1465900)Fundamental Research Funds for the Central Universities at Tongji University(PA2022000668,22120220426)Nanchang Automotive Institute of Intelligence&New Energy of Tongji University(TPDTC202211-02)。
文摘Silicon is considered one of the most promising candidates for incorporation into carbon-based anodes in lithium-ion batteries(LIBs)due to its high specific capacity.However,the significant volume changes during charge and discharge cycles lead to repeated reconstruction of the solid electrolyte interface(SEI)film and continuous loss of active lithium.Pre-lithiation method is regarded as a highly attractive approach for effectively compensating for active lithium loss during the charge and discharge cycles of LIBs.Constructing a stable SEI film is particularly crucial in the pre-lithiation process.In this study,we developed a direct contact pre-lithiation(DC-Pr)method to create a temperature-tailored robust SEI film interface on silicon-carbon(Si@C)electrodes.By investigating the morphology,structure,and composition of the SEI formed on Si@C electrodes at different pre-lithiation temperatures(50,25,0,and-25℃),we demonstrated that controlling the lithiation temperature to regulate the migration rate of lithium ions within the Si@C electrode yields a lithiated Si@C anode(25-Pr-Si@C)at 25℃ with a continuous,uniform SEI film(~3.65 nm)enriched with Li_(2)O-LiF,which exhibits synergistic effects.Importantly,the initial Coulombic efficiency(ICE)of 25-Pr-Si@C significantly improved from 85.4% in the unlithiated Si@C electrode(Blank-Si@C)to 106.1%.Additionally,the full cell configuration using a high areal loading of lithiated Si@C(~5.5 mA h cm^(-2))as the anode and NCM811 as the cathode(NCM811||25-Pr-Si@C)demonstrated superior cycling performance,maintaining 69.4% of capacity retention and achieving a Coulombic efficiency of over 99.7% after 150 cycles(0.5 C).Therefore,this simple and efficient experimental design provides a high-performance,controllable,and scalable pre-lithiation method for LIBs,paving the way for the commercialization of LIBs utilizing pre-lithiation techniques.
基金supported by the National Natural Science Foundation of China(nos.22309027 and 52374301)the Shijiazhuang Basic Research Project(nos.241790667A and 241790907A)+3 种基金the Fundamental Research Funds for the Central Universities(no.N2523050)the Natural Science Foundation of Hebei Province(no.E2024501010)the Performance subsidy fund for Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province(no.22567627H)the 2024 Hebei Provincial Postgraduate Student Innovation Ability Training Funding Project(no.CXZZSS2025162)。
文摘Halide solid-state electrolytes(SSEs)have become a new research focus for all-solid-state batteries because of their significant safety advantages,high ionic conductivity,high-voltage stability,and good ductility.Nonetheless,stability issues are a key barrier to their practical application.In past reports,the analysis of halide electrolyte stability and its enhancement methods lacked relevance,which limited the design and optimization of halide solid electrolytes.This review focus on stability issues from a chemical,electrochemical,and interfacial point of view,with particular emphasis on the interaction of halide SSEs with anode and cathode interfaces.By focusing on innovative strategies to address the stability issue,this paper aims to further deepen the understanding and development of halide all-solid-state batteries by proposing to focus research efforts on improving their stability in order to address their inherent challenges and match higher voltage cathodes,paving the way for their wider application in the next generation of energy storage technologies.
基金financially supported by the National Natural Science Foundation of China(52072036,52272187)the China Petroleum&Chemical Corporation(SINOPEC)project(223128).
文摘All-solid-state batteries(ASSBs)assembled with sulfide solid electrolytes(SSEs)and nickel(Ni)-rich oxide cathode materials are expected to achieve high energy density and safety,representing potential candidates for the next-generation energy storage systems.However,interfacial issues between SSEs and Nirich oxide cathode materials,attributed to space charge layer,interfacial side reactions,and mechanical contact failure,significantly restrict the performances of ASSBs.The interface degradation is closely related to the components of the composite cathode and the process of electrode fabrication.Focusing on the influencing factors of interface compatibility between SSEs and Ni-rich oxide cathode,this article systematically discusses how cathode active materials(CAMs),electrolytes,conductive additives,binders,and electrode fabrication impact the interface compatibility.In addition,the strategies for the compatibility modification are reviewed.Furthermore,the challenges and prospects of intensive research on the degradation and modification of the SSE/Ni-rich cathode material interface are discussed.This review is intended to inspire the development of high-energy-density and high-safety all-solid-state batteries.
基金German research Foundation(DFG,grant numbers:CH2321/1–1 and SCHO1231/7–1)JH has received a scholarship from the Chinese Scholarship Council(CSC No.:201908350115).
文摘The oviduct epithelium is the initial maternal contact site for embryos after fertilization,offering the microenviron-ment before implantation.This early gestation period is particularly sensitive to stress,which can cause reduced fertil-ity and reproductive disorders in mammals.Nevertheless,the local impact of elevated stress hormones on the ovi-duct epithelium has received limited attention to date,except for a few reports on polyovulatory species like mice and pigs.In this study,we focused on the effects of chronic maternal stress on cattle,given its association with infertil-ity issues in this monoovulatory species.Bovine oviduct epithelial cells(BOEC)differentiated at the air–liquid interface(ALI)were stimulated with 250 nmol/L cortisol for 1 or 3 weeks.Subsequently,they were assessed for morphology,bioelectrical properties,and gene expression related to oviduct function,glucocorticoid pathway,cortisol metabo-lism,inflammation,and apoptosis.Results revealed adverse effects of cortisol on epithelium structure,featured by deciliation,vacuole formation,and multilayering.Additionally,cortisol exposure led to an increase in transepithelial potential difference,downregulated mRNA expression of the major glucocorticoid receptor(NR3C1),upregulated the expression of cortisol-responsive genes(FKBP5,TSC22D3),and significant downregulation of oviductal glycopro-tein 1(OVGP1)and steroid receptors PGR and ESR1.The systematic comparison to a similar experiment previously performed by us in porcine oviduct epithelial cells,indicated that bovine cultures were more susceptible to elevated cortisol levels than porcine.The distinct responses between both species are likely linked to their divergence in the cortisol-induced expression changes of HSD11B2,an enzyme controlling the cellular capacity to metabolise cortisol.These findings provide insights into the species-specific reactions and reproductive consequences triggered by maternal stress.
文摘The large-scale commercialization of proton exchange membrane fuel cells(PEMFCs)has been hindered by the high demand of platinum(Pt)in the cathode due to the sluggish kinetics of the oxygen reduction reaction.Reducing the amount of Pt would worsen the problems caused by the adsorption of perfluorinated sulfonic acid(PFSA)ionomers to Pt via the side chains,namely,blocking the active sites of Pt and inducing densely packed layers of fluorocarbon backbones on Pt surface to obstruct local O_(2)transport at the Pt/PFSA interfaces.This work aims at optimizing the Pt/ionomer interface to mitigate the sulfonate adsorption and in the meantime to reduce the local O_(2)transport resistance(R_(local)),by using a porous composite of 1-butyl-3-methylimidazolium hydrogen sulfate ionic liquid(IL)modified MOF-808(BMImHSO_(4)@MOF-808)as additive in cathodic catalyst layer(CCL).Through detailed physical,spectroscopic and electrochemical characterizations,we demonstrate a three-fold optimization mechanism of Pt/ionomer interface structure by BMImHSO_(4)@MOF-808:the unsaturated metal sites in MOF-808 effectively inhibit the sulfonate adsorption on Pt through coordination with the sulfonates of PFSA,thereby improving catalyst utilization;the pores in MOF-808 establish efficient transport channels for gaseous oxygen,significantly reducing R_(local);the IL modification layers facilitate the formation of continuous proton transport networks,increasing proton conductivity.The incorporation of BMImHSO_(4)@MOF-808 in a low-Pt CCL(0.1 mg_(Pt)cm^(-2))yields a peak power density of 1.9 W cm^(-2)for PEMFC under H_(2)-O_(2)condition,and ca.20%increase of power density under H_(2)-air condition as compared with conventional CCL,indicating the prospect of IL-MOF composites as an efficient additive to enhance the performance of PEMFCs.
基金supports from the Beijing Laboratory of New Energy Storage Technology, North China Electric Power Universitythe Program of the National Energy Storage Industry-Education Platformthe Interdisciplinary Innovation Program of North China Electric Power University (No. XM2212315)
文摘Metal-carbon dioxide(CO_(2))batteries hold great promise for reducing greenhouse gas emissions and are regarded as one of the most promising energy storage techniques due to their efficiency advantages in CO_(2)recovery and conversion.Moreover,rechargeable nonaqueous metal-CO_(2)batteries have attracted much attention due to their high theoretical energy density.However,the stability issues of the electrode-electrolyte interfaces of nonaqueous metal-CO_(2)(lithium(Li)/sodium(Na)/potassium(K)-CO_(2))batteries have been troubling its development,and a large number of related research in the field of electrolytes have conducted in recent years.This review retraces the short but rapid research history of nonaqueous metal-CO_(2)batteries with a detailed electrochemical mechanism analysis.Then it focuses on the basic characteristics and design principles of electrolytes,summarizes the latest achievements of various types of electrolytes in a timely manner and deeply analyzes the construction strategies of stable electrode-electrolyte interfaces for metal-CO_(2)batteries.Finally,the key issues related to electrolytes and interface engineering are fully discussed and several potential directions for future research are proposed.This review enriches a comprehensive understanding of electrolytes and interface engineering toward the practical applications of next-generation metal-CO_(2)batteries.
基金financially supported by the National Natural Science Foundation of China(52172159)the Postdoctoral Fellowship Program of CPSF(GZB20230631).
文摘The reversibility and stability of aqueous Zn metal batteries(AZMBs)are largely limited by Zn dendrites and interfacial parasitic reactions.Herein,we propose a parallel modulation strategy to boost the reversibility of the Zn anode by introducing N,N,N',N'-tetramethylchloroformamidinium hexafluorophosphate(TCFH)as an additive in the electrolyte.TCFH is composed of PF6-and TN+with opposite charges.PF6-can spontaneously induce the in-situ generation of ZnF_(2)solid electrolyte interface(SEI)on the anode,which can improve the transport kinetics of Zn^(2+)at the interface,thus promoting the rapid and uniform deposition of Zn as well as inhibiting the growth of dendrites.In addition,TN+is enriched at the anode surface during Zn deposition through the anchoring effect,which brings a reconfiguration of the ion/molecule distribution.The anchored-TN+reduces the concentrations of H_(2)O and SO_(4)^(2-),sufficiently restraining the parasitic reaction.Thanks to the dual-phase interface engineering constructed of PF6-and TN+in parallel,the symmetric cell with the proposed electrolyte survives long cycling stability over750 h at 20 mA cm^(-2),10 mAh cm^(-2).This study offers a distinct viewpoint to the multidimensional optimization of Zn anodes for high-performance AZMBs.
基金The authors are grateful for financial support from the National Natural Science Foundation of China(52202199)Anhui Provincial Natural Science Foundation(2108085QE202)start-up grants from Anhui University(S020318008/007,S020118002/060).
文摘All-solid-state sodium(Na)-metal batteries(ASSSMBs)are considered promising candidates for large-scale energy storage systems due to their abundant sodium resources,unparalleled safety performance,and impressive energy density.Na superionic conductors(NASICONs)are among the best enablers of ASSSMBs in view of their high ionic conductivity,ease of synthesis,and excellent thermal stability and good electrochemical/chemical compatibility with common electrodes.However,challenges surrounding the NASICON/electrode interface,such as high interfacial resistance and dendrite formation,have hindered the development of practical ASSSMBs based on NASICONs.This review starts with an explicit summary of the interface problems between the metallic Na anode and NASICON arising from mechanical,chemical,and electrochemical aspects(i.e.,poor interface contact,insulating side-reaction products,and irregular dendrite growth).Subsequently,we systematically analyze and logically categorize modification strategies for addressing anode interface problems and provide a comprehensive discussion on the underlying enhancement mechanisms.As such,we identify underlying and universal interface enhancement mechanisms by comparatively studying various modification strategies.Furthermore,we briefly summarize the challenges in the cathode/electrolyte interface and early-stage research efforts in constructing stable cathode/electrolyte interface and fabricating high-performance composite cathodes.Finally,key suggestions and future prospectives for the advancement of NASICON-based ASSSMBs are outlined.
基金financially supported by the National Key R&D Program of China(Grant No.2022YFE0207300)National Natural Science Foundation of China(Grant Nos.22179142 and 22075314)+1 种基金Jiangsu Funding Program for Excellent Postdoctoral Talent(Grant No.2024ZB051 and 2023ZB836)the technical support for Nano-X from Suzhou Institute of Nano-Tech and Nano-Bionics,Chinese Academy of Sciences(SINANO).
文摘Solid polymer electrolytes(SPEs)have attracted much attention for their safety,ease of packaging,costeffectiveness,excellent flexibility and stability.Poly-dioxolane(PDOL)is one of the most promising matrix materials of SPEs due to its remarkable compatibility with lithium metal anodes(LMAs)and suitability for in-situ polymerization.However,poor thermal stability,insufficient ionic conductivity and narrow electrochemical stability window(ESW)hinder its further application in lithium metal batteries(LMBs).To ameliorate these problems,we have successfully synthesized a polymerized-ionic-liquid(PIL)monomer named DIMTFSI by modifying DOL with imidazolium cation coupled with TFSI^(-)anion,which simultaneously inherits the lipophilicity of DOL,high ionic conductivity of imidazole,and excellent stability of PILs.Then the tridentate crosslinker trimethylolpropane tris[3-(2-methyl-1-aziridine)propionate](TTMAP)was introduced to regulate the excessive Li^(+)-O coordination and prepare a flame-retardant SPE(DT-SPE)with prominent thermal stability,wide ESW,high ionic conductivity and abundant Lit transference numbers(t_(Li+)).As a result,the LiFePO_(4)|DT-SPE|Li cell exhibits a high initial discharge specific capacity of 149.60 mAh g^(-1)at 0.2C and 30℃with a capacity retention rate of 98.68%after 500 cycles.This work provides new insights into the structural design of PIL-based electrolytes for long-cycling LMBs with high safety and stability.
基金supported by the National Natural Science Foundation of China(No.22276064)the Youth Innovation Grant of Xiamen,Fujian Province(No.3502Z20206006)+1 种基金the MOE Key Laboratory of Resources and Environmental System Optimization(No.KLRE-KF202205)Fujian Science and Technology Project(No.2022Y3007).
文摘The non-aqueous solid-liquid biphasic solvent of 2-amino-2-methyl-1-propanol(AMP)/piperazine(PZ)/dipropylene glycol dimethyl ether(DME)features a high CO_(2)absorption loading,favorable phase separation behavior and high regeneration efficiency.Different with the liquid-liquid phase change solvent,the reaction kinetics of CO_(2)capture into solid-liquid biphasic solvent was rarely studied.In the present work,the reaction kinetics of CO_(2)absorption into AMP/PZ/DME solid-liquid biphasic solvent was investigated into the double stirred kettle reactor.The absorption reaction followed a pseudo-first-order kinetic model according to the zwitterion mechanism.The overall reaction rate constant(kov)and the enhancement factor(E)of CO_(2)absorption both increased with increasing temperature.The total mass transfer resistance of the absorbent decreased with increasing temperature and increased with increasing absorption loading,so the higher reaction temperature was conducive to the absorption,and the liquid phase mass transfer resistance was the main factor affecting the absorption rate.
基金supported in part by JSPS KAKENHI grants (nos. JP21K05243 and JP22H04621grants-in-aid for Scientific Research on Innovative Areas “Interface Ionics”)+1 种基金by a JST grant (no. JPMJFS2132,for the establishment of university fellowships toward the creation of science technology innovation)by the Suzuki foundation
文摘MgH_(2) and TiH_(2) have been extensively studied as potential anode materials due to their high theoretical specific capacities of 2036 and 1024 mAh/g,respectively.However,the large volume changes that these compounds undergo during cycling affects their performance and limits practical applications.The present work demonstrates a novel approach to limiting the volume changes of active materials.This effect is based on mechanical support from an intimate interface generated in situ via the reaction between MgH_(2) and Ti within the electrode prior to lithiation to form Mg and TiH_(2).The resulting Mg can be transformed back to MgH_(2) by reaction with LiH during delithiation.In addition,the TiH_(2) improves the reaction kinetics of MgH_(2) and enhances electrochemical performance.The intimate interface produced in this manner is found to improve the electrochemical properties of a MgH_(2)-Ti-LiH electrode.An exceptional reversible capacity of 800 mAh/g is observed even after 200 cycles with a high current density of 1 mA/cm^(2) and a high proportion of active material(90 wt.%)at an operation temperature of 120℃.This study therefore showcases a new means of improving the performance of electrodes by limiting the volume changes of active materials.
基金Project(51474189)supported by the National Natural Science Foundation of ChinaProject(QN2015214)supported by the Educational Commission of Hebei Province,China
文摘Cu/Al clad strips are prepared using solid?liquid cast-rolling bonding(SLCRB)technique with a d160mm×150mm twin-roll experimental caster.The extent of interfacial reactions,composition of the reaction products,and their micro-morphology evolution in the SLCRB process are investigated with scanning electron microscope(SEM),energy dispersive spectrometer(EDS),and X-ray diffraction(XRD).In the casting pool,initial aluminized coating is first generated on the copper strip surface,with the diffusion layer mainly consisting ofα(Al)+CuAl2and growing at high temperatures,with the maximum thickness of10μm.After sequent rolling below the kiss point,the diffusion layer is broken by severe elongation,which leads to an additional crack bond process with a fresh interface of virgin base metal.The average thickness is reduced from10to5μm.The reaction products,CuAl2,CuAl,and Cu9Al4,are dispersed along the rolling direction.Peeling and bending test results indicate that the fracture occurs in the aluminum substrate,and the morphology is a dimple pattern.No crack or separation is found at the bonding interface after90°-180°bending.The presented method provides an economical way to fabricate Cu/Al clad strip directly.
基金supported by the National Natural Science Foundation of China(No.11227902)part of NSFC ME~2 beamline project and Science and Technology Commission of Shanghai Municipality(No.14520722100)supported by National Natural Science Foundation of China(Nos.21802096,21832004,and11805255)
文摘In the past few decades, various surface analysis techniques find wide applications in studies of interfacial phenomena ranging from fundamental surface science,catalysis, environmental science and energy materials.With the help of bright synchrotron sources, many of these techniques have been further advanced into novel in-situ/operando tools at synchrotron user facilities, providing molecular level understanding of chemical/electrochemical processes in-situ at gas–solid and liquid–solid interfaces.Designing a proper endstation for a dedicated beamline is one of the challenges in utilizing these techniques efficiently for a variety of user's requests. Many factors,including pressure differential, geometry and energy of the photon source, sample and analyzer, need to be optimized for the system of interest. In this paper, we discuss the design and performance of a new endstation at beamline02 B at the Shanghai Synchrotron Radiation Facility for ambient pressure X-ray photoelectron spectroscopy studies.This system, equipped with the newly developed hightransmission HiPP-3 analyzer, is demonstrated to be capable of efficiently collecting photoelectrons up to 1500 eV from ultrahigh vacuum to ambient pressure of 20 mbar.The spectromicroscopy mode of HiPP-3 analyzer also enables detection of photoelectron spatial distribution with resolution of 2.8 ± 0.3 lm in one dimension. In addition,the designing strategies of systems that allow investigations in phenomena at gas–solid interface and liquid–solid interface will be highlighted through our discussion.
基金financially supported by National Natural Science Foundation of China(Grants 51690162,51604171 and 51701112)Shanghai Municipal Science and Technology Commission(No.17JC1400602)Shanghai Sailing Program(19YF1415900).
文摘The morphological instability of solid/liquid(S/L)interface during solidification will result in different patterns of microstructure.In this study,two dimension(2 D)and three dimension(3 D)in-situ observation of solid/liquid interfacial morphology transition in Al-Zn alloy during directional solidification were performed via X-ray imaging.Under a condition of increasing temperature gradient(G),the interface transition from dendritic pattern to cellular pattern,and then to planar growth with perturbation was captured.The effect of solidification parameter(the ratio of temperature gradient and growth velocity(v),G/v)on morphological instabilities was investigated and the experimental results were compared to classical"constitutional supercooling"theory.The results indicate that 2 D and 3 D evolution process of S/L interface morphology under the same thermal condition are different.It seems that the S/L interface in 2 D observation is easier to achieve planar growth than that in 3 D,implying higher S/L interface stability in 2 D thin plate samples.This can be explained as the restricted liquid flow under 2 D solidification which is beneficial to S/L interface stability.The in-situ observation in present study can provide coherent dataset for microstructural formation investigation and related model validation during solidification.
基金supported by the National Key Research and Development Program(Nos.2017YFA0403800 and 2017YFB0305301)the National Natural Science Foundation of ChinaExcellent Young Scholars(No.51922068)+1 种基金the National Natural Science Foundation of China(Nos.51727802,51821001 and 51904187)funded by China Postdoctoral Science Foundation(No.2019M661500)。
文摘The liquid/solid(L/S)interface of dissimilar metals is critical to the microstructure,mechanical strength,and structural integrity of interconnects in many important applications such as electronics,automotive,aeronautics,and astronautics,and therefore has drawn increasing research interests.To design preferential microstructure and optimize mechanical properties of the interconnects,it is crucial to understand the formation and growth mechanisms of diversified structures at the L/S interface during interconnecting.In situ synchrotron radiation or tube-generated X-ray radiography and tomography technologies make it possible to observe the evolution of the L/S interface directly and therefore have greatly propelled the research in this field.Here,we review the recent progress in understanding the L/S interface behaviors using advanced in situ X-ray imaging techniques with a particular focus on the following two issues:(1)interface behaviors in the solder joints for microelectronic packaging including the intermetallic compounds(IMCs)during refl ow,Sn dendrites,and IMCs during solidification and refl ow porosities and(2)growth characteristics and morphological transition of IMCs in the interconnect of dissimilar metals at high temperature.Furthermore,the main achievements and future research perspectives in terms of metallurgical bonding mechanisms under complex conditions with improved X-ray sources and detectors are remarked and discussed.
基金financially supported by the National Natural Science Foundation of China (No. 51674236)the Key Research and Development Program of Liaoning Province (No.2019JH2/10100009)+1 种基金the National Science and Technology Major Project (No.2017-Ⅵ-0003-0073)the National Key Research and Development Program (No.2018Y-FA0702900)。
文摘The effect of the pulsed magnetic field on the grain refinement of superalloy K4169 has been studied in directional solidification.In the presence of the solid-liquid interface condition,the distributions of the electromagnetic force,flow field,temperature field,and Joule heat in front of the solid-liquid interface in directional solidification with the pulsed magnetic field are simulated.The calculation results show that the largest electromagnetic force in the melt appears near the solid-liquid interface,and the electromagnetic force is distributed in a gradient.There are intensive electromagnetic vibrations in front of the solid-liquid interface.The forced melt convection is mainly concentrated in front of the solid-liquid interface,accompanied by a larger flow velocity.The simulation results indicate that the grain refinement is attributed to that the electromagnetic vibration and forced convection increase the nucleation rate and the probability of dendrite fragments survival,for making dendrite easily fragmented,homogenizing the melt temperature,and increasing the undercooling in front of the solid-liquid interface.
