This work explores the potential of La_(1-x)Pr_(x)NiO_(4+δ)thin films fabricated by Pulsed Injection Metal-Organic Chemical Vapor Deposition as oxygen electrodes for low-temperature solid oxide cells.La_(1-x)Pr_(x)Ni...This work explores the potential of La_(1-x)Pr_(x)NiO_(4+δ)thin films fabricated by Pulsed Injection Metal-Organic Chemical Vapor Deposition as oxygen electrodes for low-temperature solid oxide cells.La_(1-x)Pr_(x)NiO_(4+δ)materials offer promising mixed ionic and electronic conductivity and high oxygen reduction reaction kinetics.In this study,we focus on the microstructural and electrochemical properties of LaPrNiO_(4+δ)thin films deposited at various temperatures(600-650℃),revealing that a two-temperature deposition process yields nano-architectured films with a dense bottom film and a porous nano-columnar top layer of the same material.Electrochemical impedance spectroscopy and electrical conductivity relaxation experiments demonstrate enhanced surface exchange coefficients compared to bulk LaPrNiO_(4+δ)and La_(2)NiO_(4+δ)and high performance,with polarization resistances as low as 0.10Ωcm^(2) at 600℃ and 1.00 at 500℃.To better understand the electrochemical behavior of these electrodes,we investigated the limiting mechanisms of oxygen reduction by analyzing the kinetic response to varying oxygen partial pressures and performing detailed impedance analyses.These nano-columnar LaPrNiO_(4+δ)oxygen electrodes were also deposited on commercial half-cells,enabling the resulting full cells to operate successfully in both reversible solid oxide fuel cell and electrolysis cell modes,reaching a performance of 0.34 W cm^(-2) at 600℃ in reversible solid oxide fuel cell mode.This work underscores the promise of LaPrNiO_(4+δ)thin films for efficient low-temperature-solid oxide cells while addressing challenges in durability and stability.展开更多
Solid oxide cells(SOCs)have emerged as one of the key technologies for low-carbon energy transition due to their fuel flexibility and high system efficiency.However,their long-term deployment remains hindered by mater...Solid oxide cells(SOCs)have emerged as one of the key technologies for low-carbon energy transition due to their fuel flexibility and high system efficiency.However,their long-term deployment remains hindered by material degradation and interfacial instability under high-temperature and multi-atmospheric operating conditions.In particular,achieving a balance between catalytic activity and structural stability presents a major bottleneck in material design.High-entropy materials(HEMs),with their unique configurational entropy effect,multi-principal element synergy,and tunable local defect chemistry,offer a promising pathway to overcome these limitations.This perspective reviews recent advances in the application of HEMs in SOCs,including element selection and structure tuning,machine-learning-assisted design,in situ leaching and self-assembly engineering,and high-entropy coating strategies.Special attention is paid to how HEMs leverage their multi-elemental composition and defect regulation to enhance electrode performance,stabilize interfaces,and improve tolerance to poisoning species.We further highlight the potential of data-driven approaches for accelerating HEM screening and performance optimization,and discuss the integration of high-throughput experimentation with computational modeling to enable efficient exploration of the vast compositional space.Despite the remarkable progress,key challenges remain in achieving long-term stability and reliability across diverse operating scenarios.Future research should focus on precise control of non-equimolar compositions,development of cross-scale dynamic characterization techniques,and establishment of closed-loop frameworks that couple data-driven models with experimental feedback.These efforts will pave the way toward the rational design of high-performance,durable SOC systems.展开更多
This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0...This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.展开更多
Minimizing the thermal expansion coefficient(TEC)mismatch between the cathode and electrolyte in solid oxide fuel cells is crucial for achieving stable,durable operation and high performance.Recently,materials with ne...Minimizing the thermal expansion coefficient(TEC)mismatch between the cathode and electrolyte in solid oxide fuel cells is crucial for achieving stable,durable operation and high performance.Recently,materials with negative thermal expansion(NTE)have at-tracted significant attention as effective additives for tailoring the thermomechanical properties of electrodes and enhancing cell durability.In this work,for the first time,single-phase NTE perovskite Sm_(0.85)Zn_(0.15)MnO_(3−δ)(SZM15)was successfully synthesized via the sol-gel method,eliminating the unwanted ZnO phase typically observed in materials obtained through the conventional solid-state reaction route.The sol-gel approach proved highly advantageous,offering low cost,robustness,excellent chemical homogeneity,precise compositional control,and high phase purity.After optimization of synthesis parameters,a negative TEC of approximately−6.5×10^(−6)K^(−1)was achieved in the 400-850℃range.SZM15 was then incorporated as an additive(10wt%-50wt%)into a SmBa0.5Sr0.5CoCuO_(5+δ)(SBSCCO)cathode to tune the thermomechanical properties with a La_(0.8)Sr_(0.2)Ga_(0.8)Mg_(0.2)O_(3−δ)(LSGM)electrolyte,achieving a minimal TEC mismatch of only 1%.Notably,the SBSCCO+10wt%SZM15 composite cathode exhibited the lowest polarization resistance of 0.019Ω·cm^(2)at 900℃,showing approximately 70%lower than that of the pristine cathode.Excellent long-term stability after 100 h of operation was achieved.In addition,a high peak power density of 680 mW·cm^(−2)was achieved in a Ni-YSZ(yttria-stabilized zirconia)|YSZ|Ce_(0.9)Gd_(0.1)O_(2−δ)(GDC10)|SBSCCO+10wt%SZM15 anode-supported fuel cell at 850℃,highlighting the effectiveness of incorporating NTE materials as a promising strategy for regulating the thermomechanical properties and improving the long-term stability of intermediate temperature solid oxide fuel cells(IT-SOFCs).展开更多
Solid oxide fuel cell(SOFC)is a promising energy conversion device because of its high efficiency and fuel/oxidant flexibility,enabling the direct conversion of chemical energy to electrical power.By using N_(2)O as a...Solid oxide fuel cell(SOFC)is a promising energy conversion device because of its high efficiency and fuel/oxidant flexibility,enabling the direct conversion of chemical energy to electrical power.By using N_(2)O as an oxidant instead of air,we develop a dual-phase catalyst La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3-δ)-Gd_(0.1)Ce_(0.9)O_(2-δ)(LSCF-GDC),which exhibits efficient bifunctionality as a cathode for SOFC,synergistic ally promoting simultaneous N_(2)O decomposition and oxygen reduction kinetics.展开更多
Protonic solid oxide electrolysis cells(P-SOECs)are a promising technology for water electrolysis to produce green hydrogen.However,there are still challenges related key materials and anode/electrolyte interface.P-SO...Protonic solid oxide electrolysis cells(P-SOECs)are a promising technology for water electrolysis to produce green hydrogen.However,there are still challenges related key materials and anode/electrolyte interface.P-SOECs with Zr-rich electrolyte,called Zr-rich side P-SOECs,possess high thermodynamically stability under high steam concentrations but the large reaction resistances and the current leakage,thus the inferior performances.In this study,an efficient functional interlayer Ba_(0.95)La_(0.05)Fe_(0.8)Zn_(0.2)O_(3-δ)(BLFZ)in-between the anode and the electrolyte is developed.The electrochemical performances of P-SOECs are greatly enhanced because the BLFZ can greatly increase the interface contact,boost anode reaction kinetics,and increase proton injection into electrolyte.As a result,the P-SOEC yields high current density of 0.83 A cm^(-2) at 600℃ in 1.3 Vamong all the reported Zr-rich side cells.This work not only offers an efficient functional interlayer for P-SOECs but also holds the potential to achieve P-SOECs with high performances and long-term stability.展开更多
Solid oxide electrolysis cells(SOECs)can effectively convert CO_(2)into high value-added CO fuel.In this paper,Sc-doped Sr_(2)Fe_(1.5)Mo_(0.3)Sc_(0.2)O_(6−δ)(SFMSc)perovskite oxide material is synthesized via solid-p...Solid oxide electrolysis cells(SOECs)can effectively convert CO_(2)into high value-added CO fuel.In this paper,Sc-doped Sr_(2)Fe_(1.5)Mo_(0.3)Sc_(0.2)O_(6−δ)(SFMSc)perovskite oxide material is synthesized via solid-phase method as the cathode for CO_(2)electrolysis by SOECs.XRD confirms that SFMSc exhibits a stable cubic phase crystal structure.The experimental results of TPD,TG,EPR,CO_(2)-TPD further demonstrate that Sc-doping increases the concentration of oxygen vacancy in the material and the chemical adsorption capacity of CO_(2)molecules.Electrochemical tests reveal that SFMSc single cell achieves a current density of 2.26 A/cm^(2) and a lower polarization impedance of 0.32Ω·cm^(2) at 800°C under the applied voltage of 1.8 V.And no significant performance attenuation or carbon deposition is observed after 80 h continuous long-term stability test.This study provides a favorable support for the development of SOEC cathode materials with good electro-catalytic performance and stability.展开更多
Solid oxide cells(SOCs)are emerging devices for efficient energy storage and conversion.However,during SOC operation,gaseous chromium(Cr)species released from Fe-Cr alloy interconnect can lead to Cr deposition and poi...Solid oxide cells(SOCs)are emerging devices for efficient energy storage and conversion.However,during SOC operation,gaseous chromium(Cr)species released from Fe-Cr alloy interconnect can lead to Cr deposition and poisoning of air electrodes,causing substantial degradation in electrochemical performance and compromising the longterm stability of SOCs.This mini-review examines the mechanism of Cr deposition and poisoning in air electrodes under both fuel-cell and electrolysis modes.Furthermore,emphasis is placed on the recent advancements in strategies to mitigate Cr poisoning,offering insights into the rational design and development of active and Cr-tolerant air electrodes for SOCs.展开更多
Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage p...Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage poses challenges for the performance and stability of air electrodes.In this work,a novel high-entropy perovskite oxide La_(0.2)Pr_(0.2)Gd_(0.2)Sm_(0.2)Sr_(0.2)Co_(0.8)Fe_(0.2)O_(3−δ)(HE-LSCF)is proposed and investigated as an air electrode in RSOC.The electrochemical behavior of HE-LSCF was studied as an air electrode in both fuel cell and electrolysis modes.The polarization impedance(Rp)of the HE-LSCF electrode is only 0.25Ω·cm^(2) at 800℃ in an air atmosphere.Notably,at an electrolytic voltage of 2 V and a temperature of 800℃,the current density reaches up to 1.68 A/cm^(2).The HE-LSCF air electrode exhibited excellent reversibility and stability,and its electrochemical performance remains stable after 100 h of reversible operation.With these advantages,HE-LSCF is shown to be an excellent air electrode for RSOC.展开更多
As global energy demand increases and environmental standards tighten,the development of efficient,eco-friendly energy conversion and storage technologies becomes crucial.Solid oxide cells(SOCs)show great promise beca...As global energy demand increases and environmental standards tighten,the development of efficient,eco-friendly energy conversion and storage technologies becomes crucial.Solid oxide cells(SOCs)show great promise because of their high energy conversion efficiency and wide range of applications.Highentropy materials(HEMs),a novel class of materials comprising several principal elements,have attracted significant interest within the materials science and energy sectors.Their distinctive structural features and adaptable functional properties offer immense potential for innovation across various applications.This review systematically covers the basic concepts,crystal structures,element selection,and major synthesis strategies of HEMs,and explores in detail the specific applications of these materials in SOCs,including its potential as air electrodes,fuel electrodes,electrolytes,and interconnects(including barrier coatings).By analyzing existing studies,this review reveals the significant advantages of HEMs in enhancing the performance,anti-poisoning,and stability of SOCs;highlights the key areas and challenges for future research;and looks into possible future directions.展开更多
Multicomponent Gd_(1−x)Sm_(x)Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)double perovskites are optimized for application in terms of chemical composi-tion and morphology for the use as oxygen electrodes in solid oxide cells.Structur...Multicomponent Gd_(1−x)Sm_(x)Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)double perovskites are optimized for application in terms of chemical composi-tion and morphology for the use as oxygen electrodes in solid oxide cells.Structural studies of other physicochemical properties are con-ducted on a series of materials obtained by the sol-gel method with different ratios of Gd and Sm cations.It is documented that changing the x value,and the resulting adjustment of the average ionic radius,have a significant impact on the crystal structure,stability,as well as on the total conductivity and thermomechanical properties of the materials,with the best results obtained for the Gd_(0.75)Sm_(0.2)5Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)composition.Oxygen electrodes are prepared using the selected compound,allowing to obtain low polarization resistance values,such as 0.086Ω·cm^(2)at 800℃.Systematic studies of electrocatalytic activity are conducted using La_(0.8)Sr_(0.2)Ga_(0.8)Mg_(_(0.2))O_(3−δ)as the electrolyte for all electrodes,and Ce_(0.8)Gd_(0.2)O_(2−δ)electrolyte for the best performing Gd_(0.75)Sm_(0.2)5Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)electrodes.The electrochemical data are analyzed using the distribution of relaxation times method.Also,the influence of the preparation method of the electrode material is in-ve`stigated using the electrospinning technique.Finally,the performance of the Gd_(0.75)Sm_(0.2)5Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)electrodes is tested in a Ni-YSZ(yttria-stabilized zirconia)anode-supported cell with a Ce_(0.8)Gd_(0.2)O_(2−δ)buffer layer,in the fuel cell and electrolyzer operating modes.With the electrospun electrode,a power density of 462 mW·cm^(−2)is obtained at 700℃,with a current density of ca.0.2 A·cm^(−2)at 1.3 V for the electrolysis at the same temperature,indicating better performance compared to the sol-gel-based electrode.展开更多
Metal-Supported Solid Oxide Fuel Cells(MS-SOFCs)hold significant potential for driving the energy transition.These electrochemical devices represent the most advanced generation of Solid Oxide Fuel Cell(SOFCs)and can ...Metal-Supported Solid Oxide Fuel Cells(MS-SOFCs)hold significant potential for driving the energy transition.These electrochemical devices represent the most advanced generation of Solid Oxide Fuel Cell(SOFCs)and can pave the way for mass production and wider adoption than Proton Exchange Membrane Fuel Cells(PEMFCs)due to their fuel flexibility,higher power density and the absence of noble metals in the fabrication processes.This review examines the state-of-the-art of SOFCs and MS-SOFCs,presenting perspectives and research directions for these key technological devices,highlighting novel materials,techniques,architectures,devices,and degradation mechanisms to address current challenges and future opportunities.Techniques such as infiltration/impregnation,ex-solution catalyst synthesis,and the use of a pre-catalytic reformer layer are discussed as their impact on efficiency and prolonged activity.These concepts are also described and connected with well-dispersed nano particles,hindrance of coarsening,and an increased number of Triple Phase Boundaries(TPBs).This review also describes the synergistic use of reformers with MS-SOFCs to compose solutions in energy generation from readily available fuels.Lastly,the End-of-Life(EoL),recycling,and life-cycle assessments(LCAs)of the Fuel Cell Hybrid Electric Vehicles(FCHEVs)were discussed.LCAs comparing Fuel Cell Electric Vehicles(FCEVs)equipped with(PEMFCs)and FCHEVs equipped with MS-SOFCs,both powered with hydrogen(H_(2))generated by different routes were compared.This review aims to provide valuable insights into these key technological devices,emphasizing the importance of robust research and development to enhance performance and lifespan while reducing costs and environmental impact.展开更多
Solid oxide cells(SOCs),which include solid oxide fuel cells(SOFCs),symmetrical solid oxide cells(S-SOCs),and reversible solid oxide cells(R-SOCs),are considered key technologies for driving low-carbon and green revol...Solid oxide cells(SOCs),which include solid oxide fuel cells(SOFCs),symmetrical solid oxide cells(S-SOCs),and reversible solid oxide cells(R-SOCs),are considered key technologies for driving low-carbon and green revolution in the energy sector.Because of their clean,low-cost,and high-efficiency characteristics,SOCs have great potential for energy conversion and storage.However,the further development of SOC technologies faces challenges,such as a lack of long-term operational stability of the cell system,high material cost under high-temperature operating conditions,and limited catalytic effects at low temperatures.Recently,high-entropy materials(HEMs)have demonstrated excellent performance and wide application prospects in catalytic reactions,energy storage,supercapacitors,and other fields owing to their unique atomic arrangement and the four core effects(high mixed entropy stabilization effect,sluggish dif-fusion effect,lattice distortion effect,and“cocktail”effect).HEMs provide a new perspective for solving the aforementioned problems in the field of SOCs.This comprehensive review summarizes the applications of HEMs in the three fundamental components of SOCs:elec-trodes,electrolytes,and interconnects,focusing on the role of HEMs in enhancing catalytic activity and conductivity while mitigating harmful gas poisoning.In addition,this review proposes possible development directions for HEMs in SOCs based on the current re-search progress,providing valuable reference for high-entropy designs aimed at further enhancing the performance of SOCs.展开更多
Developing highly active and stable air electrodes remains challenging for reversible solid oxide cells(R-SOCs).Herein,we re-port an A-site high-entropy engineered perovskite oxide,La_(0.2)Pr_(0.2)Nd_(0.2)Ba_(0.2)Sr_(...Developing highly active and stable air electrodes remains challenging for reversible solid oxide cells(R-SOCs).Herein,we re-port an A-site high-entropy engineered perovskite oxide,La_(0.2)Pr_(0.2)Nd_(0.2)Ba_(0.2)Sr_(0.2)Co_(0.8)Fe_(0.2)O_(3−δ)(HE-LSCF),and its electrocatalytic activity and stability property are systematically probed for tubular R-SOCs.The HE-LSCF air electrode exhibits excellent oxygen reduction reac-tion(ORR)activity with a low polarization resistance of 0.042Ω·cm^(2)at 700℃,which is much lower than that of La0.6Sr0.4Co_(0.8)Fe_(0.2)O_(3−δ)(LSCF),indicating the excellent catalytic activity of HE-LSCF.Meanwhile,the tubular R-SOCs with HE-LSCF shows a high peak power density of 1.18 W·cm^(−2)in the fuel cell mode and a promising electrolysis current density of−0.52 A·cm^(−2)at 1.5 V in the electrolysis mode with H_(2)(~10%H_(2)O)atmosphere at 700℃.More importantly,the tubular R-SOCs with HE-LSCF shows favorable stability under 180 h reversible cycling test.Our results show the high-entropy design can significantly enhance the activity and robustness of LSCF electrode for tubular R-SOCs.展开更多
The commercialization of solid oxide fuel cells depends on the cathode,which possesses both high catalytic activity and a thermal-expansion coefficient(TEC)that aligns with the electrolyte.Although the cobalt-based ca...The commercialization of solid oxide fuel cells depends on the cathode,which possesses both high catalytic activity and a thermal-expansion coefficient(TEC)that aligns with the electrolyte.Although the cobalt-based cathode La_(0.6)Sr_(0.4)CoO_(3)(LSC)offers excellent catalytic performance,its TEC is significantly larger than that of the electrolyte.In this study,we mechanically mix Sm_(0.2)Ce_(0.8)O_(2−δ)(SDC)with LSC to create a composite cathode.By incorporating 50wt%SDC,the TEC decreases significantly from 18.29×10^(−6) to 13.90×10^(−6) K^(−1).Under thermal-shock conditions ranging from room temperature to 800℃,the growth rate of polarization resistance is only 0.658%per cycle,i.e.,merely 49%that of pure LSC.The button cell comprising the LSC-SDC composite cathode operates stably for over 900 h without Sr segregation,with a voltage growth rate of 1.11%/kh.A commercial flat-tube cell(active area:70 cm^(2))compris-ing the LSC-SDC composite cathode delivers 54.8 W at 750℃.The distribution of relaxation-time shows that the non-electrode portion is the main rate-limiting step.This study demonstrates that the LSC-SDC mixture strategy effectively improves the compatibility with the electrolyte while maintaining a high output,thus rendering it a promising commercial cathode material.展开更多
In the global trend of vigorously developing hydrogen energy,proton-conducting solid oxide electrolysis cells(P-SOECs)have attracted significant attention due to their advantages of high efficiency and not requiring p...In the global trend of vigorously developing hydrogen energy,proton-conducting solid oxide electrolysis cells(P-SOECs)have attracted significant attention due to their advantages of high efficiency and not requiring precious metals.However,the application of P-SOECs faces challenges,particularly in developing high-performance anodes possessing both high catalytic activity and ionic conductivity.In this study,La_(0.9)Ba_(0.1)Co_(0.7)Ni_(0.3)O_(3−δ)(LBCN9173)and La_(0.9)Ba_(0.1)Co_(0.7)Ni_(0.3)O_(3−δ)(LCCN9173)oxides are tailored as promising anodes by machine learning model,achieving the synergistic enhancement of water oxidation reaction kinetics and proton conduction,which is confirmed by comprehensively analyzing experiment and density functional theory calculation results.Furthermore,the anodic reaction mechanisms for P-SOECs with these anodes are elucidated by analyzing distribution of relaxation time spectra and Gibbs energy of water oxidation reaction,manifesting that the dissociation of H_(2)O is facilitated on LBCN9173 anode.As a result,P-SOEC with LBCN9173 anode demonstrates a top-rank current density of 2.45 A cm^(−2)at 1.3 V and an extremely low polarization resistance of 0.05Ωcm^(2)at 650°C.This multi-scale,multi-faceted research approach not only discovered a high-performance anode but also proved the robust framework for the machine learning-assisted design of anodes for P-SOECs.展开更多
Low-concentration coal mine methane(LC-CMM),which is predominantly composed of methane,serves as a clean and low-carbon energy resource with significant potential for utilization.Utilizing LC-CMM as fuel for solid oxi...Low-concentration coal mine methane(LC-CMM),which is predominantly composed of methane,serves as a clean and low-carbon energy resource with significant potential for utilization.Utilizing LC-CMM as fuel for solid oxide fuel cells(SOFCs)represents an efficient and promising strategy for its effective utilization.However,direct application in Ni-based anodes induces carbon deposition,which severely degrades cell performance.Herein,a medium-entropy oxide Sr_(2)FeNi_(0.1)Cr_(0.3)Mn_(0.3)Mo_(0.3)O_(6−δ)(SFNCMM)was developed as an anode internal reforming catalyst.Following reduction treatment,FeNi_(3) nano-alloy particles precipitate on the surface of the material,thereby significantly enhancing its catalytic activity for LC-CMM reforming process.The catalyst achieved a methane conversion rate of 53.3%,demonstrating excellent catalytic performance.Electrochemical evaluations revealed that SFNCMM-Gd_(0.1)Ce_(0.9)O_(2−δ)(GDC)with a weight ratio of 7:3 exhibited superior electrochemical performance when employed as the anodic catalytic layer.With H_(2) and LC-CMM as fuels,the single cell achieved maximum power densities of 1467.32 and 1116.97 mW·cm^(−2) at 800℃,respectively,with corresponding polarization impedances of 0.17 and 1.35Ω·cm^(2).Furthermore,the single cell maintained stable operation for over 100 h under LC-CMM fueling without significant carbon deposition,confirming its robust resistance to carbon formation.These results underscore the potential of medium-entropy oxides as highly effective catalytic layers for mitigating carbon deposition in SOFCs.展开更多
“Three-in-one”cathode,achieved via B-site heavy-doping of transition elements(typically Co,Fe)into proton-conductive perovskite,holds promise for enhancing the performance of proton-conducting solid oxide fuel cell(...“Three-in-one”cathode,achieved via B-site heavy-doping of transition elements(typically Co,Fe)into proton-conductive perovskite,holds promise for enhancing the performance of proton-conducting solid oxide fuel cell(H-SOFC)operated below 650℃for electricity generation.However,its electrochemical behavior above 650℃,essential for improving the efficiency of H-SOFC for fuel conversion,remains insufficiently explored.It is still challenging to propose guidance for the design of“threein-one”cathode toward optimal H-SOFC performance below and above 650℃,with the prerequisite of gaining a comprehensive understanding of the roles of Co and Fe in determining the H-SOFC performance.This work is to address this challenge.Through theoretical/experimental studies,Co is identified to play a role in improving the oxygen reduction reaction(ORR)activity while Fe plays a role in facilitating the cathode/electrolyte interfacial proton conduction.Therefore,if the operating temperature is above 650℃,lowering the Co/Fe ratio in“three-in-one”cathode becomes crucial since the limiting factor shifts from ORR activity to proton conduction.Implementing this strategy,the SOFC using BaCo_(0.15)-Fe_(0.55)Zr_(0.1)Y_(0.1)Yb_(0.1)O_(3−δ)cathode achieves peak power densities of 1.67Wcm^(−2)under H-SOFC mode at 700℃and 2.32Wcm^(−2)under dual ion-conducting SOFC mode at 750℃,which are the highest reported values so far.展开更多
Reversible solid oxide cells(RSOCs)are capable of converting various energy resources,between electricity and chemical fuels,with high efficiency and flexibility,making them suitable for grid balancing and renewable e...Reversible solid oxide cells(RSOCs)are capable of converting various energy resources,between electricity and chemical fuels,with high efficiency and flexibility,making them suitable for grid balancing and renewable energy consumption.However,the practical application of RSOCs is still limited by the insufficient activity and stability of the electrodes in different operating modes.Herein,a highly efficient symmetrical electrode composed of La_(0.3)Sr_(0.6)Ti_(0.1)Co_(0.2)Fe_(0.7)O_(3-δ)(LSTCF)nanofibers and in situ exsolved Co_(3)Fe_(7) nanoparticles is developed for boosting the performance of RSOCs.The reversible phase transition,high activity and stability of the electrode have been confirmed by a combination of experimental(e.g.,transmission electron microscopy and X-ray absorption fine structure)and computational studies.Electrolyte-supported RSOCs with the symmetrical electrode demonstrate excellent catalytic activity and stability,achieving a high peak power density of 0.98 W cm^(-2)in the fuel cell mode using H_(2)as the fuel(or 0.53 W cm^(-2)using CH_(4)as the fuel)and a high current density of 1.09 A cm^(-2) at 1.4 V in the CO_(2)electrolysis mode(or 1.03 A cm^(-2)at 1.3 V for H_(2)O electrolysis)at 800℃while maintaining excellent durability for over 100 h.展开更多
This work investigates the transient performance and stability of CO_(2)/H_(2)O co-electrolysis in an air-free environment using a flat-tube solid oxide electrolysis cell(SOEC)stack.The results showed that the transie...This work investigates the transient performance and stability of CO_(2)/H_(2)O co-electrolysis in an air-free environment using a flat-tube solid oxide electrolysis cell(SOEC)stack.The results showed that the transient behavior of the stack with and without blowing gas into the air electrode is almost the same.With a current density of 0.67 A·cm^(-2)@750℃,the stack operated for over 200 h under co-electrolysis conditions without air blowing,and the voltage drop rate of the stack was approximately 0.203%/100 hours.Microstructure analysis revealed a significant loss of nickel particles and an apparent for-mation of an insulating phase strontium chromate(SrCrO4)on the surface of the current collection layer of the air electrode,which are identified as key factors contributing to the performance degradation of the stack.This study provides a reference for development of efficient fuel preparation technology based on SOEC stack in airless environments.展开更多
基金funded by the European Union's Horizon 2020 research and innovation program under grant agreements no.824072(Harvestore project)no.101017709(EPISTORE)by the Centre of Excellence of Multifunctional Architectured Materials“CEMAM”no.ANR-10-LABX-44-01 as part of the“Investments for the Future”Program.
文摘This work explores the potential of La_(1-x)Pr_(x)NiO_(4+δ)thin films fabricated by Pulsed Injection Metal-Organic Chemical Vapor Deposition as oxygen electrodes for low-temperature solid oxide cells.La_(1-x)Pr_(x)NiO_(4+δ)materials offer promising mixed ionic and electronic conductivity and high oxygen reduction reaction kinetics.In this study,we focus on the microstructural and electrochemical properties of LaPrNiO_(4+δ)thin films deposited at various temperatures(600-650℃),revealing that a two-temperature deposition process yields nano-architectured films with a dense bottom film and a porous nano-columnar top layer of the same material.Electrochemical impedance spectroscopy and electrical conductivity relaxation experiments demonstrate enhanced surface exchange coefficients compared to bulk LaPrNiO_(4+δ)and La_(2)NiO_(4+δ)and high performance,with polarization resistances as low as 0.10Ωcm^(2) at 600℃ and 1.00 at 500℃.To better understand the electrochemical behavior of these electrodes,we investigated the limiting mechanisms of oxygen reduction by analyzing the kinetic response to varying oxygen partial pressures and performing detailed impedance analyses.These nano-columnar LaPrNiO_(4+δ)oxygen electrodes were also deposited on commercial half-cells,enabling the resulting full cells to operate successfully in both reversible solid oxide fuel cell and electrolysis cell modes,reaching a performance of 0.34 W cm^(-2) at 600℃ in reversible solid oxide fuel cell mode.This work underscores the promise of LaPrNiO_(4+δ)thin films for efficient low-temperature-solid oxide cells while addressing challenges in durability and stability.
基金supported by National Natural Science Foundation of China(U24A20542,52472210)Natural Science Foundation of Jiangsu Province(No.BK20221312)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX25_1706).
文摘Solid oxide cells(SOCs)have emerged as one of the key technologies for low-carbon energy transition due to their fuel flexibility and high system efficiency.However,their long-term deployment remains hindered by material degradation and interfacial instability under high-temperature and multi-atmospheric operating conditions.In particular,achieving a balance between catalytic activity and structural stability presents a major bottleneck in material design.High-entropy materials(HEMs),with their unique configurational entropy effect,multi-principal element synergy,and tunable local defect chemistry,offer a promising pathway to overcome these limitations.This perspective reviews recent advances in the application of HEMs in SOCs,including element selection and structure tuning,machine-learning-assisted design,in situ leaching and self-assembly engineering,and high-entropy coating strategies.Special attention is paid to how HEMs leverage their multi-elemental composition and defect regulation to enhance electrode performance,stabilize interfaces,and improve tolerance to poisoning species.We further highlight the potential of data-driven approaches for accelerating HEM screening and performance optimization,and discuss the integration of high-throughput experimentation with computational modeling to enable efficient exploration of the vast compositional space.Despite the remarkable progress,key challenges remain in achieving long-term stability and reliability across diverse operating scenarios.Future research should focus on precise control of non-equimolar compositions,development of cross-scale dynamic characterization techniques,and establishment of closed-loop frameworks that couple data-driven models with experimental feedback.These efforts will pave the way toward the rational design of high-performance,durable SOC systems.
基金financially supported by the National Natural Science Foundation of China(No.22309067)the Open Project Program of the State Key Laboratory of Materials-Oriented Chemical Engineering,China(No.KL21-05)the Marine Equipment and Technology Institute,Jiangsu University of Science and Technology,China(No.XTCX202404)。
文摘This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.
基金supported by the research project within the program“Excellence Initiative-Research University”for the AGH University of Krakow(IDUB AGH,Action 21)Kun Zheng acknowledges financial support from AGH University of Krakow(No.16.16.210.476).
文摘Minimizing the thermal expansion coefficient(TEC)mismatch between the cathode and electrolyte in solid oxide fuel cells is crucial for achieving stable,durable operation and high performance.Recently,materials with negative thermal expansion(NTE)have at-tracted significant attention as effective additives for tailoring the thermomechanical properties of electrodes and enhancing cell durability.In this work,for the first time,single-phase NTE perovskite Sm_(0.85)Zn_(0.15)MnO_(3−δ)(SZM15)was successfully synthesized via the sol-gel method,eliminating the unwanted ZnO phase typically observed in materials obtained through the conventional solid-state reaction route.The sol-gel approach proved highly advantageous,offering low cost,robustness,excellent chemical homogeneity,precise compositional control,and high phase purity.After optimization of synthesis parameters,a negative TEC of approximately−6.5×10^(−6)K^(−1)was achieved in the 400-850℃range.SZM15 was then incorporated as an additive(10wt%-50wt%)into a SmBa0.5Sr0.5CoCuO_(5+δ)(SBSCCO)cathode to tune the thermomechanical properties with a La_(0.8)Sr_(0.2)Ga_(0.8)Mg_(0.2)O_(3−δ)(LSGM)electrolyte,achieving a minimal TEC mismatch of only 1%.Notably,the SBSCCO+10wt%SZM15 composite cathode exhibited the lowest polarization resistance of 0.019Ω·cm^(2)at 900℃,showing approximately 70%lower than that of the pristine cathode.Excellent long-term stability after 100 h of operation was achieved.In addition,a high peak power density of 680 mW·cm^(−2)was achieved in a Ni-YSZ(yttria-stabilized zirconia)|YSZ|Ce_(0.9)Gd_(0.1)O_(2−δ)(GDC10)|SBSCCO+10wt%SZM15 anode-supported fuel cell at 850℃,highlighting the effectiveness of incorporating NTE materials as a promising strategy for regulating the thermomechanical properties and improving the long-term stability of intermediate temperature solid oxide fuel cells(IT-SOFCs).
基金financially supported by the National Natural Science Foundation of China(No.52336009)Guangdong Basic and Applied Basic Research Foundation(No.2023A1515010429)+4 种基金the Natural Science Basic Research Plan in Shaanxi Province of China(No.2024JC-YBQN-0475)Xidian University Specially Funded Project for Interdisciplinary Exploration(No.TZJH2024063)the Fundamental Research Funds for the Central Universities(No.QTZX23061)Qinchuangyuan Project(No.QCYRCXM-2022-236)the Innovation Center of Nuclear Power Technology(No.HDLCXZX-2022-ZH-013)
文摘Solid oxide fuel cell(SOFC)is a promising energy conversion device because of its high efficiency and fuel/oxidant flexibility,enabling the direct conversion of chemical energy to electrical power.By using N_(2)O as an oxidant instead of air,we develop a dual-phase catalyst La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3-δ)-Gd_(0.1)Ce_(0.9)O_(2-δ)(LSCF-GDC),which exhibits efficient bifunctionality as a cathode for SOFC,synergistic ally promoting simultaneous N_(2)O decomposition and oxygen reduction kinetics.
基金financial support from the JSPS KAKENHI Grant-in-Aid for Scientific Research(B),No.21H02035KAKENHI Grant-in-Aid for Challenging Research(Exploratory),No.21K19017+2 种基金KAKENHI Grant-in-Aid for Transformative Research Areas(B),No.21H05100National Natural Science Foundation of China,No.22409033 and No.22409035Basic and Applied Basic Research Foundation of Guangdong Province,No.2022A1515110470.
文摘Protonic solid oxide electrolysis cells(P-SOECs)are a promising technology for water electrolysis to produce green hydrogen.However,there are still challenges related key materials and anode/electrolyte interface.P-SOECs with Zr-rich electrolyte,called Zr-rich side P-SOECs,possess high thermodynamically stability under high steam concentrations but the large reaction resistances and the current leakage,thus the inferior performances.In this study,an efficient functional interlayer Ba_(0.95)La_(0.05)Fe_(0.8)Zn_(0.2)O_(3-δ)(BLFZ)in-between the anode and the electrolyte is developed.The electrochemical performances of P-SOECs are greatly enhanced because the BLFZ can greatly increase the interface contact,boost anode reaction kinetics,and increase proton injection into electrolyte.As a result,the P-SOEC yields high current density of 0.83 A cm^(-2) at 600℃ in 1.3 Vamong all the reported Zr-rich side cells.This work not only offers an efficient functional interlayer for P-SOECs but also holds the potential to achieve P-SOECs with high performances and long-term stability.
基金supported by National Key R&D Program of China(2021YFB4001401)National Natural Science Foundation of China(52272190,22178023).
文摘Solid oxide electrolysis cells(SOECs)can effectively convert CO_(2)into high value-added CO fuel.In this paper,Sc-doped Sr_(2)Fe_(1.5)Mo_(0.3)Sc_(0.2)O_(6−δ)(SFMSc)perovskite oxide material is synthesized via solid-phase method as the cathode for CO_(2)electrolysis by SOECs.XRD confirms that SFMSc exhibits a stable cubic phase crystal structure.The experimental results of TPD,TG,EPR,CO_(2)-TPD further demonstrate that Sc-doping increases the concentration of oxygen vacancy in the material and the chemical adsorption capacity of CO_(2)molecules.Electrochemical tests reveal that SFMSc single cell achieves a current density of 2.26 A/cm^(2) and a lower polarization impedance of 0.32Ω·cm^(2) at 800°C under the applied voltage of 1.8 V.And no significant performance attenuation or carbon deposition is observed after 80 h continuous long-term stability test.This study provides a favorable support for the development of SOEC cathode materials with good electro-catalytic performance and stability.
基金supported by National Natural Science Foundation of China(22279018)National Natural Science Foundation of China(22005055)Natural Science Foundation of Fujian Province(2022J01085).
文摘Solid oxide cells(SOCs)are emerging devices for efficient energy storage and conversion.However,during SOC operation,gaseous chromium(Cr)species released from Fe-Cr alloy interconnect can lead to Cr deposition and poisoning of air electrodes,causing substantial degradation in electrochemical performance and compromising the longterm stability of SOCs.This mini-review examines the mechanism of Cr deposition and poisoning in air electrodes under both fuel-cell and electrolysis modes.Furthermore,emphasis is placed on the recent advancements in strategies to mitigate Cr poisoning,offering insights into the rational design and development of active and Cr-tolerant air electrodes for SOCs.
基金supported by Fundamental Research Funds for the Central Universities(2023KYJD1008)the Science Research Projects of the Anhui Higher Education Institutions of China(2022AH051582).
文摘Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage poses challenges for the performance and stability of air electrodes.In this work,a novel high-entropy perovskite oxide La_(0.2)Pr_(0.2)Gd_(0.2)Sm_(0.2)Sr_(0.2)Co_(0.8)Fe_(0.2)O_(3−δ)(HE-LSCF)is proposed and investigated as an air electrode in RSOC.The electrochemical behavior of HE-LSCF was studied as an air electrode in both fuel cell and electrolysis modes.The polarization impedance(Rp)of the HE-LSCF electrode is only 0.25Ω·cm^(2) at 800℃ in an air atmosphere.Notably,at an electrolytic voltage of 2 V and a temperature of 800℃,the current density reaches up to 1.68 A/cm^(2).The HE-LSCF air electrode exhibited excellent reversibility and stability,and its electrochemical performance remains stable after 100 h of reversible operation.With these advantages,HE-LSCF is shown to be an excellent air electrode for RSOC.
基金supported by the National Key R&D Program of China(2022YFB4004000)National Natural Science Foundation of China(U24A20542,52472210,22279057)+3 种基金Natural Science Foundation of Jiangsu Province(BK20221312)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX23_1465)Cultivation Program for the Excellent Doctoral Dissertation of Nanjing Tech University(2023-09)the grant of Hydrogen Energy Laboratory(No.FEUZ-2024-0009)。
文摘As global energy demand increases and environmental standards tighten,the development of efficient,eco-friendly energy conversion and storage technologies becomes crucial.Solid oxide cells(SOCs)show great promise because of their high energy conversion efficiency and wide range of applications.Highentropy materials(HEMs),a novel class of materials comprising several principal elements,have attracted significant interest within the materials science and energy sectors.Their distinctive structural features and adaptable functional properties offer immense potential for innovation across various applications.This review systematically covers the basic concepts,crystal structures,element selection,and major synthesis strategies of HEMs,and explores in detail the specific applications of these materials in SOCs,including its potential as air electrodes,fuel electrodes,electrolytes,and interconnects(including barrier coatings).By analyzing existing studies,this review reveals the significant advantages of HEMs in enhancing the performance,anti-poisoning,and stability of SOCs;highlights the key areas and challenges for future research;and looks into possible future directions.
基金funded by the National Science Centre,Poland,on the basis of the decision number UMO-2020/37/B/ST8/02097supported by the program“Excellence Initiative-Research University”for the AGH University of Krakow(IDUB AGH,No.501.696.7996,Action 4,ID 9880).
文摘Multicomponent Gd_(1−x)Sm_(x)Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)double perovskites are optimized for application in terms of chemical composi-tion and morphology for the use as oxygen electrodes in solid oxide cells.Structural studies of other physicochemical properties are con-ducted on a series of materials obtained by the sol-gel method with different ratios of Gd and Sm cations.It is documented that changing the x value,and the resulting adjustment of the average ionic radius,have a significant impact on the crystal structure,stability,as well as on the total conductivity and thermomechanical properties of the materials,with the best results obtained for the Gd_(0.75)Sm_(0.2)5Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)composition.Oxygen electrodes are prepared using the selected compound,allowing to obtain low polarization resistance values,such as 0.086Ω·cm^(2)at 800℃.Systematic studies of electrocatalytic activity are conducted using La_(0.8)Sr_(0.2)Ga_(0.8)Mg_(_(0.2))O_(3−δ)as the electrolyte for all electrodes,and Ce_(0.8)Gd_(0.2)O_(2−δ)electrolyte for the best performing Gd_(0.75)Sm_(0.2)5Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)electrodes.The electrochemical data are analyzed using the distribution of relaxation times method.Also,the influence of the preparation method of the electrode material is in-ve`stigated using the electrospinning technique.Finally,the performance of the Gd_(0.75)Sm_(0.2)5Ba_(0.5)Sr_(0.5)CoCuO_(5+δ)electrodes is tested in a Ni-YSZ(yttria-stabilized zirconia)anode-supported cell with a Ce_(0.8)Gd_(0.2)O_(2−δ)buffer layer,in the fuel cell and electrolyzer operating modes.With the electrospun electrode,a power density of 462 mW·cm^(−2)is obtained at 700℃,with a current density of ca.0.2 A·cm^(−2)at 1.3 V for the electrolysis at the same temperature,indicating better performance compared to the sol-gel-based electrode.
基金the Fundacao de Amparo à Pesquisa do Estado de Sao Paulo(FAPESP,2022/02235-4,2017/11958-1,2017/11986-5,2014/02163-7)Fundacao de Apoio da UFMG(FUNDEP,27192-36,01-P-38465/2023)Conselho Nacional de Desenvolvimento Científico e Tecnológico(CNPq,405675/2022-4,56405643/2022-5,302180/2022-2,306870/2021-5)。
文摘Metal-Supported Solid Oxide Fuel Cells(MS-SOFCs)hold significant potential for driving the energy transition.These electrochemical devices represent the most advanced generation of Solid Oxide Fuel Cell(SOFCs)and can pave the way for mass production and wider adoption than Proton Exchange Membrane Fuel Cells(PEMFCs)due to their fuel flexibility,higher power density and the absence of noble metals in the fabrication processes.This review examines the state-of-the-art of SOFCs and MS-SOFCs,presenting perspectives and research directions for these key technological devices,highlighting novel materials,techniques,architectures,devices,and degradation mechanisms to address current challenges and future opportunities.Techniques such as infiltration/impregnation,ex-solution catalyst synthesis,and the use of a pre-catalytic reformer layer are discussed as their impact on efficiency and prolonged activity.These concepts are also described and connected with well-dispersed nano particles,hindrance of coarsening,and an increased number of Triple Phase Boundaries(TPBs).This review also describes the synergistic use of reformers with MS-SOFCs to compose solutions in energy generation from readily available fuels.Lastly,the End-of-Life(EoL),recycling,and life-cycle assessments(LCAs)of the Fuel Cell Hybrid Electric Vehicles(FCHEVs)were discussed.LCAs comparing Fuel Cell Electric Vehicles(FCEVs)equipped with(PEMFCs)and FCHEVs equipped with MS-SOFCs,both powered with hydrogen(H_(2))generated by different routes were compared.This review aims to provide valuable insights into these key technological devices,emphasizing the importance of robust research and development to enhance performance and lifespan while reducing costs and environmental impact.
基金supported by the Industrial Foresight Projects and Common Key Technologies of Zhenjiang(No.GY2024028)The authors also acknowledged the support of the Marine Equipment and Technology Institute,Jiangsu University of Science and Technology(No.XTCX202404).
文摘Solid oxide cells(SOCs),which include solid oxide fuel cells(SOFCs),symmetrical solid oxide cells(S-SOCs),and reversible solid oxide cells(R-SOCs),are considered key technologies for driving low-carbon and green revolution in the energy sector.Because of their clean,low-cost,and high-efficiency characteristics,SOCs have great potential for energy conversion and storage.However,the further development of SOC technologies faces challenges,such as a lack of long-term operational stability of the cell system,high material cost under high-temperature operating conditions,and limited catalytic effects at low temperatures.Recently,high-entropy materials(HEMs)have demonstrated excellent performance and wide application prospects in catalytic reactions,energy storage,supercapacitors,and other fields owing to their unique atomic arrangement and the four core effects(high mixed entropy stabilization effect,sluggish dif-fusion effect,lattice distortion effect,and“cocktail”effect).HEMs provide a new perspective for solving the aforementioned problems in the field of SOCs.This comprehensive review summarizes the applications of HEMs in the three fundamental components of SOCs:elec-trodes,electrolytes,and interconnects,focusing on the role of HEMs in enhancing catalytic activity and conductivity while mitigating harmful gas poisoning.In addition,this review proposes possible development directions for HEMs in SOCs based on the current re-search progress,providing valuable reference for high-entropy designs aimed at further enhancing the performance of SOCs.
基金support provided by the National Key R&D Program of China(No.2024YFE0101500)the National Natural Science Foundation of China(No.52272257)the Natural Science Foundation of Jiangsu Province(No.BK20240109).
文摘Developing highly active and stable air electrodes remains challenging for reversible solid oxide cells(R-SOCs).Herein,we re-port an A-site high-entropy engineered perovskite oxide,La_(0.2)Pr_(0.2)Nd_(0.2)Ba_(0.2)Sr_(0.2)Co_(0.8)Fe_(0.2)O_(3−δ)(HE-LSCF),and its electrocatalytic activity and stability property are systematically probed for tubular R-SOCs.The HE-LSCF air electrode exhibits excellent oxygen reduction reac-tion(ORR)activity with a low polarization resistance of 0.042Ω·cm^(2)at 700℃,which is much lower than that of La0.6Sr0.4Co_(0.8)Fe_(0.2)O_(3−δ)(LSCF),indicating the excellent catalytic activity of HE-LSCF.Meanwhile,the tubular R-SOCs with HE-LSCF shows a high peak power density of 1.18 W·cm^(−2)in the fuel cell mode and a promising electrolysis current density of−0.52 A·cm^(−2)at 1.5 V in the electrolysis mode with H_(2)(~10%H_(2)O)atmosphere at 700℃.More importantly,the tubular R-SOCs with HE-LSCF shows favorable stability under 180 h reversible cycling test.Our results show the high-entropy design can significantly enhance the activity and robustness of LSCF electrode for tubular R-SOCs.
基金the financial support from the National Natural Science Foundation of China(No.22209191)Ningbo Key R&D Project(No.2023Z155).
文摘The commercialization of solid oxide fuel cells depends on the cathode,which possesses both high catalytic activity and a thermal-expansion coefficient(TEC)that aligns with the electrolyte.Although the cobalt-based cathode La_(0.6)Sr_(0.4)CoO_(3)(LSC)offers excellent catalytic performance,its TEC is significantly larger than that of the electrolyte.In this study,we mechanically mix Sm_(0.2)Ce_(0.8)O_(2−δ)(SDC)with LSC to create a composite cathode.By incorporating 50wt%SDC,the TEC decreases significantly from 18.29×10^(−6) to 13.90×10^(−6) K^(−1).Under thermal-shock conditions ranging from room temperature to 800℃,the growth rate of polarization resistance is only 0.658%per cycle,i.e.,merely 49%that of pure LSC.The button cell comprising the LSC-SDC composite cathode operates stably for over 900 h without Sr segregation,with a voltage growth rate of 1.11%/kh.A commercial flat-tube cell(active area:70 cm^(2))compris-ing the LSC-SDC composite cathode delivers 54.8 W at 750℃.The distribution of relaxation-time shows that the non-electrode portion is the main rate-limiting step.This study demonstrates that the LSC-SDC mixture strategy effectively improves the compatibility with the electrolyte while maintaining a high output,thus rendering it a promising commercial cathode material.
基金supported by National Natural Science Foundation of China(No.12301626,No.22409033,and No.22409035)Guangdong Basic and Applied Basic Research Foundation(No.2022A1515110612,No.2022A1515110470 and No.2024A1515011849)+1 种基金Funding by Science and Technology Projects in Guangzhou(No.2025A03J3089 and No.2024A04J4111)Guangdong Engineering Technology Research Center for Hydrogen Energy and Fuel Cells.
文摘In the global trend of vigorously developing hydrogen energy,proton-conducting solid oxide electrolysis cells(P-SOECs)have attracted significant attention due to their advantages of high efficiency and not requiring precious metals.However,the application of P-SOECs faces challenges,particularly in developing high-performance anodes possessing both high catalytic activity and ionic conductivity.In this study,La_(0.9)Ba_(0.1)Co_(0.7)Ni_(0.3)O_(3−δ)(LBCN9173)and La_(0.9)Ba_(0.1)Co_(0.7)Ni_(0.3)O_(3−δ)(LCCN9173)oxides are tailored as promising anodes by machine learning model,achieving the synergistic enhancement of water oxidation reaction kinetics and proton conduction,which is confirmed by comprehensively analyzing experiment and density functional theory calculation results.Furthermore,the anodic reaction mechanisms for P-SOECs with these anodes are elucidated by analyzing distribution of relaxation time spectra and Gibbs energy of water oxidation reaction,manifesting that the dissociation of H_(2)O is facilitated on LBCN9173 anode.As a result,P-SOEC with LBCN9173 anode demonstrates a top-rank current density of 2.45 A cm^(−2)at 1.3 V and an extremely low polarization resistance of 0.05Ωcm^(2)at 650°C.This multi-scale,multi-faceted research approach not only discovered a high-performance anode but also proved the robust framework for the machine learning-assisted design of anodes for P-SOECs.
基金supported by the National Key R&D Program of China(No.2024YFB4007501)the Natural Science Foundation of Jiangsu Province(No.BK20240109)the project of Jiangsu Key Laboratory for Clean Utilization of Carbon Resources(No.BM2024007).
文摘Low-concentration coal mine methane(LC-CMM),which is predominantly composed of methane,serves as a clean and low-carbon energy resource with significant potential for utilization.Utilizing LC-CMM as fuel for solid oxide fuel cells(SOFCs)represents an efficient and promising strategy for its effective utilization.However,direct application in Ni-based anodes induces carbon deposition,which severely degrades cell performance.Herein,a medium-entropy oxide Sr_(2)FeNi_(0.1)Cr_(0.3)Mn_(0.3)Mo_(0.3)O_(6−δ)(SFNCMM)was developed as an anode internal reforming catalyst.Following reduction treatment,FeNi_(3) nano-alloy particles precipitate on the surface of the material,thereby significantly enhancing its catalytic activity for LC-CMM reforming process.The catalyst achieved a methane conversion rate of 53.3%,demonstrating excellent catalytic performance.Electrochemical evaluations revealed that SFNCMM-Gd_(0.1)Ce_(0.9)O_(2−δ)(GDC)with a weight ratio of 7:3 exhibited superior electrochemical performance when employed as the anodic catalytic layer.With H_(2) and LC-CMM as fuels,the single cell achieved maximum power densities of 1467.32 and 1116.97 mW·cm^(−2) at 800℃,respectively,with corresponding polarization impedances of 0.17 and 1.35Ω·cm^(2).Furthermore,the single cell maintained stable operation for over 100 h under LC-CMM fueling without significant carbon deposition,confirming its robust resistance to carbon formation.These results underscore the potential of medium-entropy oxides as highly effective catalytic layers for mitigating carbon deposition in SOFCs.
基金supported by the Natural Sciences and Engineering Research Council(NSERC)of Canada,Discovery Grant(GRPIN-2016-05494)Strategic Research Projects of Alberta Innovates Technology Futures(#G2016000655)funding from the Canada First Research Excellence Fund(CFREF-2015-00001).
文摘“Three-in-one”cathode,achieved via B-site heavy-doping of transition elements(typically Co,Fe)into proton-conductive perovskite,holds promise for enhancing the performance of proton-conducting solid oxide fuel cell(H-SOFC)operated below 650℃for electricity generation.However,its electrochemical behavior above 650℃,essential for improving the efficiency of H-SOFC for fuel conversion,remains insufficiently explored.It is still challenging to propose guidance for the design of“threein-one”cathode toward optimal H-SOFC performance below and above 650℃,with the prerequisite of gaining a comprehensive understanding of the roles of Co and Fe in determining the H-SOFC performance.This work is to address this challenge.Through theoretical/experimental studies,Co is identified to play a role in improving the oxygen reduction reaction(ORR)activity while Fe plays a role in facilitating the cathode/electrolyte interfacial proton conduction.Therefore,if the operating temperature is above 650℃,lowering the Co/Fe ratio in“three-in-one”cathode becomes crucial since the limiting factor shifts from ORR activity to proton conduction.Implementing this strategy,the SOFC using BaCo_(0.15)-Fe_(0.55)Zr_(0.1)Y_(0.1)Yb_(0.1)O_(3−δ)cathode achieves peak power densities of 1.67Wcm^(−2)under H-SOFC mode at 700℃and 2.32Wcm^(−2)under dual ion-conducting SOFC mode at 750℃,which are the highest reported values so far.
基金supported by the National Natural Science Foundation of China(No.52377212 and 51877173)program of Beijing Huairou Laboratory(ZD2022006A)+2 种基金the Key R&D Project of Shaanxi Province(2023-YBGY-057)the State Key Laboratory of Electrical Insulation and Power Equipment(EIPE22314,EIPE22306)the Natural Science Basic Research Program of Shaanxi(No.2023-JC-QN-0483).
文摘Reversible solid oxide cells(RSOCs)are capable of converting various energy resources,between electricity and chemical fuels,with high efficiency and flexibility,making them suitable for grid balancing and renewable energy consumption.However,the practical application of RSOCs is still limited by the insufficient activity and stability of the electrodes in different operating modes.Herein,a highly efficient symmetrical electrode composed of La_(0.3)Sr_(0.6)Ti_(0.1)Co_(0.2)Fe_(0.7)O_(3-δ)(LSTCF)nanofibers and in situ exsolved Co_(3)Fe_(7) nanoparticles is developed for boosting the performance of RSOCs.The reversible phase transition,high activity and stability of the electrode have been confirmed by a combination of experimental(e.g.,transmission electron microscopy and X-ray absorption fine structure)and computational studies.Electrolyte-supported RSOCs with the symmetrical electrode demonstrate excellent catalytic activity and stability,achieving a high peak power density of 0.98 W cm^(-2)in the fuel cell mode using H_(2)as the fuel(or 0.53 W cm^(-2)using CH_(4)as the fuel)and a high current density of 1.09 A cm^(-2) at 1.4 V in the CO_(2)electrolysis mode(or 1.03 A cm^(-2)at 1.3 V for H_(2)O electrolysis)at 800℃while maintaining excellent durability for over 100 h.
基金co-supported by the National Key R&D Program of China(No.2022YFB4002203)Baima Lake Laboratory Joint Funds of the Zhejiang Provincial Natural Science Foundation of China(No.LBMHY24B060003)Ningbo Key R&D Project(No.2023Z155).
文摘This work investigates the transient performance and stability of CO_(2)/H_(2)O co-electrolysis in an air-free environment using a flat-tube solid oxide electrolysis cell(SOEC)stack.The results showed that the transient behavior of the stack with and without blowing gas into the air electrode is almost the same.With a current density of 0.67 A·cm^(-2)@750℃,the stack operated for over 200 h under co-electrolysis conditions without air blowing,and the voltage drop rate of the stack was approximately 0.203%/100 hours.Microstructure analysis revealed a significant loss of nickel particles and an apparent for-mation of an insulating phase strontium chromate(SrCrO4)on the surface of the current collection layer of the air electrode,which are identified as key factors contributing to the performance degradation of the stack.This study provides a reference for development of efficient fuel preparation technology based on SOEC stack in airless environments.
