Arc fault detection is desperately required in Solid State Power Controllers（SSPC） in addition to their fundamental functions because arcs will provoke growing harm and threat to aircraft safety. Experimental study ...Arc fault detection is desperately required in Solid State Power Controllers（SSPC） in addition to their fundamental functions because arcs will provoke growing harm and threat to aircraft safety. Experimental study has been done to obtain the faulted current data. In order to improve the detection speed and accuracy, two fast arc fault detection methods have been proposed in this paper with the analysis of only half cycle data. Both Fast Fourier Transform（FFT） and Wavelet Packets Decomposition（WPD） have been adopted to distinguish arc fault currents from normal operation currents. Analysis results show that Alternating Current（AC） arcs can be effectively and accurately detected with the proposed half cycle data based methods. Moreover,experimental verification results have also been provided.展开更多
The solid state photochemical reaction of nitrobenzaldehyde with indole was investigated. Seven hey products were identified by IR, MS,^(1)H HMR and elemental analysis.
Vertical Axis Wind Turbines (VAWTs) with fixed pitch blades have a limited power capture performance envelope as the Tip Speed Ratio (TSR) changes. Circulation Control (CC) has been proposed and simulated to possibly ...Vertical Axis Wind Turbines (VAWTs) with fixed pitch blades have a limited power capture performance envelope as the Tip Speed Ratio (TSR) changes. Circulation Control (CC) has been proposed and simulated to possibly increase power capture of a VAWT using constant CC jet momentum, but a practical method of minimizing CC usage has yet to be explored. In addition, VAWTs are typically limited in power capture performance either by a maximum peak at a small set of TSR or wide operating TSR at fractions of the peak performance based on the design solidity. Both the reduced jet usage and solidity limitation were addressed by developing a method of dynamically using CC to perform a virtual solidity change. The developed method described within this work used CC to change blade aerodynamics to specifically match a maximum performing static solidity or wake shape at a given TSR. Simulation results using an existing aerodynamics model indicated a significant reduction in the re-quired CC jet momentum compared to a constant CC system along with control over power capture for a CC-VAWT.展开更多
A discretization precision control method based on the second order osculating surface is proposed. The discretization precision of 3 D solid is controlled according to the error between the discrete solid surface a...A discretization precision control method based on the second order osculating surface is proposed. The discretization precision of 3 D solid is controlled according to the error between the discrete solid surface and its second order osculating surface. The global maximal error has been gotten after analyzing all the extremums of the error function. It can be used in controlling and optimizing the discretization precision of 3 D solid in computer 3 D modeling and NC milling path generation.展开更多
A solid-phase synthesis of 1α-hydroxylation of 5,6-trans-vitamin D3 8 is described.The solid phase resin acts as a special protecting group, which gives a higher stereoselectivity in oxidation step than classical pro...A solid-phase synthesis of 1α-hydroxylation of 5,6-trans-vitamin D3 8 is described.The solid phase resin acts as a special protecting group, which gives a higher stereoselectivity in oxidation step than classical protecting groups. The stereochemistry control is favored by using high crosslinkage polymer support in a poor solvent. This work may be of benefit to the synthesis of vitamin D system.展开更多
A finite element method(FEM) for the numerical simulation of the columnar part of the mould-temperature-control solidification(MTCS) process was presented. The latent heat was taken into account and 3D transient heat ...A finite element method(FEM) for the numerical simulation of the columnar part of the mould-temperature-control solidification(MTCS) process was presented. The latent heat was taken into account and 3D transient heat transfer analysis was carried out by using the developed FEM software. The relative errors between the numerical and experimental data are less than 6%. Three MTCS cases were computed with this method. The first case only opens the cooling channels in the bottom of the mold. The second case individually controls the separate 7 groups of cooling channels by giving 7 control points. When the temperature of a control point reaches the preset value of 400℃, the corresponding channel will be opened. The third case opens all the cooling channels at the same time. The results indicate that in the second case, the solid-liquid interface keeps near-planar. The growth velocity of the solid-liquid interface is 0.3-0.4 mm/s, which is greater than 0.1-0.3 mm/s of the first case, performing better than the others. Thus the forming quality and efficiency part interior can be improved by mold-temperature-control and the numerical model is validated. The numerical simulation of MTCS can provide an available tool for the advanced investigation on the defect improvement and the crystal’s quality.展开更多
Controlled shear stress （CSS） test was used to study the effect of solid contents on the corresponding rheological parameters for sludge. Three types of sludge with or without conditioning, including activated slud...Controlled shear stress （CSS） test was used to study the effect of solid contents on the corresponding rheological parameters for sludge. Three types of sludge with or without conditioning, including activated sludge （AS）, anaerobic digested sludge （ADS）, and water treatment residuals （WTRs）, were collected for the CSS test. Results showed that the yield stress and the cohesion energy of the sludge networks were improved with increased total suspending solid （TSS） contents in most cases. For the conditioned AS/ADS and the raw WTRs, exponential law was observed in the relationships between cohesion energy of material networks or yield stress and the TSS contents, whereas for the conditioned WTRs, only exponential law dependence was found between the parameters of shear modulus or critical strain and the TSS contents.展开更多
The main aim of this research is to get a better knowledge and understanding of the micro-scale oscillatory networks behavior in the solid propellants reactionary zones. Fundamental understanding of the micro-and nano...The main aim of this research is to get a better knowledge and understanding of the micro-scale oscillatory networks behavior in the solid propellants reactionary zones. Fundamental understanding of the micro-and nano-scale combustion mechanisms is essential to the development and further improvement of the next-generation technologies for extreme control of the solid propellant thrust. Both experiments and theory confirm that the micro-and nano-scale oscillatory networks excitation in the solid propellants reactionary zones is a rather universal phenomenon. In accordance with our concept,the micro-and nano-scale structures form both the fractal and self-organized wave patterns in the solid propellants reactionary zones. Control by the shape, the sizes and spacial orientation of the wave patterns allows manipulate by the energy exchange and release in the reactionary zones. A novel strategy for enhanced extreme thrust control in solid propulsion systems are based on manipulation by selforganization of the micro-and nano-scale oscillatory networks and self-organized patterns formation in the reactionary zones with use of the system of acoustic waves and electro-magnetic fields, generated by special kind of ring-shaped electric discharges along with resonance laser radiation. Application of special kind of the ring-shaped electric discharges demands the minimum expenses of energy and opens prospects for almost inertia-free control by combustion processes. Nano-sized additives will enhance self-organizing and self-synchronization of the micro-and nano-scale oscillatory networks on the nanometer scale. Suggested novel strategy opens the door for completely new ways for enhanced extreme thrust control of the solid propulsion systems.展开更多
The designed Ce^3＋-doped alkaline-earth silicate phosphors CamSr2 m-nBanSiO4：Ce^3＋,Li^＋ （CSBS：Ce^3＋） were synthesized by a high temperature solid-state reaction. The crystal field splitting and the centroid sh...The designed Ce^3＋-doped alkaline-earth silicate phosphors CamSr2 m-nBanSiO4：Ce^3＋,Li^＋ （CSBS：Ce^3＋） were synthesized by a high temperature solid-state reaction. The crystal field splitting and the centroid shift from the flee ion energy of 5d configuration were approximated from the spectrum for Ca2SiO4, Sr2SiO4 and Ba2SiO4 phosphors. The single-phase purity was checked by means of X-ray diffraction. Here, when the doped concentration of Ca2. is less than 80% （m 〈 1.6）, we report the structural phase transformation from monoclinic system [3-Ca2Si04 to orthorhombic system α′-Ca2SiO4. The phosphors excited by near-ultraviolet （NUV） light at wavelengths ranging from 200 to 400 nm demonstrate a broad asymmetric blue emission band. The emission peak wavelength redshifts firstly from 417 nm of Ca2SiO4 to 438 nm of Sro.3Cal.6SiO4, and then blueshifts to 411 nm of Sr2SiO4, and the end of 401 nm of Ba2SiOa. These results indicate that the tunable blue-emission of the phosphors can he realized through changing the solid solution components, which has a potential use as a blue component for fabricated precision modulation LEDs light sources and auxiliaries of SSC plastics films for different plant growths. We discuss in detail the possible mechanism and energy diagram of the tunable blue luminescence in CamSr2-M-nBaNSiO4：Ce^3＋.Li^＋ phosphors.展开更多
The variation of mass, and moment of inertia of a spin-stabilized spacecraft leads to concern about the nutation instability. Here a careful analysis on the nutation instability is performed on a spacecraft propelled ...The variation of mass, and moment of inertia of a spin-stabilized spacecraft leads to concern about the nutation instability. Here a careful analysis on the nutation instability is performed on a spacecraft propelled by solid rocket booster（SRB）. The influences of specific solid propellant designs on transversal angular velocity are discussed. The results show that the typical SRB of End Burn suppresses the non-principal axial angular velocity. On the contrary, the frequently used SRB of Radial Burn could amplify the transversal angular velocity. The nutation instability caused by a design of Radial Burn could be remedied by the addition of End Burn at the same time based on the study of the combination design of both End Burn and Radial Burn.The analysis of the results proposes the design conception of how to control the nutation motion.The method is suitable to resolve the nutation instability of solid rocket motor with complex propellant patterns.展开更多
Chlorine(Cl) is extensively present in solid wastes, causing significant problems during the thermal conversion of waste to energy or fuels, by combustion, gasification or pyrolysis.This paper introduces the analytica...Chlorine(Cl) is extensively present in solid wastes, causing significant problems during the thermal conversion of waste to energy or fuels, by combustion, gasification or pyrolysis.This paper introduces the analytical methods for determining the Cl content in solid materials and presents the concentrations of Cl in various types of wastes, as reported in literature. Then, it provides a comprehensive analysis on the Cl emission behavior and Cl species formed during the thermal processing of the inorganic and organic Cl sources. The challenges resulted from the reactions between the formed Cl species and the ferrous metals, the heavy metals and the organic matters are summarized and discussed, e.g., high temperature corrosion, heavy metal evaporation and dioxin formation. The quality degradation of products(oil, char and syngas) by Cl is analyzed. Finally, the available controlling methods of Cl emission, including pre-treatment(water washing, sorting,microwave irradiation and stepwise pyrolysis) and in-furnace(absorbents, co-treatment and catalysts) methods are assessed.展开更多
Silver nanoparticles were synthesized in reverse micelles consisting of sucrose fatty acid esters by dissolving reactant powder in the water pool of reverse micelles through the solid-liquid extraction. Silver nanopar...Silver nanoparticles were synthesized in reverse micelles consisting of sucrose fatty acid esters by dissolving reactant powder in the water pool of reverse micelles through the solid-liquid extraction. Silver nanoparticles having various sizes and shapes were obtained at high concentration. The size of silver nanoparticles was controlled by reaction temperature. Moreover, the size of silver nanoparticles was dependent upon the average esterification degree of sucrose fatty acid esters forming reverse micelles. The wavelength in the peaks, which corresponded upon the localized surface plasmon resonance of resultant silver nanoparticles, was correlated with their sizes.展开更多
A rapid and effective method, solid phase extraction coupled with high performance liquid chromatography（SPE-HPLC）, was applied to the separation and analysis of ginsenosides. Waters OASIS HLB was used for concentra...A rapid and effective method, solid phase extraction coupled with high performance liquid chromatography（SPE-HPLC）, was applied to the separation and analysis of ginsenosides. Waters OASIS HLB was used for concentrating and purifying samples and Alltima C18（53 mm×7 mm, 3 μm） chromatography column was used for separating ginsenoside Rg1, Re, Rb1, Rc, Rb2 and Rd. These ginsenosides were analyzed within 20 min in our gradient elution process and the equilibrium time of the chromatography column cost only 5 min. Moreover, there was no obvious baseline drift in our experiment. This method was used to analyze the contents of ginsenosides in different ginseng products for quality control. Four ginseng products were studied, including two kinds of capsules, one kind of tablet and one kind of injection. The results show that the method developed in this paper had good accuracy, linearity and precision. Therefore, this method could be applied in quality control of ginseng products.展开更多
The vibration and control of pipes conveying fluid is studied. The solid-liquid coupling vibration equations of the pipe conveying fluid are deduced by Hamilton principle.The direct velocity feedback is used to contro...The vibration and control of pipes conveying fluid is studied. The solid-liquid coupling vibration equations of the pipe conveying fluid are deduced by Hamilton principle.The direct velocity feedback is used to control the pipe vibration. The whip response and control are discussed.展开更多
基金co-supported by the National Natural Science Foundation of China(Nos.51407144 and 51777169)the Aviation Research Funds(No.20164053029)+1 种基金the Fundamental Research Funds for the Central Universities(Nos.3102017ZY027 and 3102017GX08001)the Young Elite Scientist Sponsorship Program by CAST
文摘Arc fault detection is desperately required in Solid State Power Controllers（SSPC） in addition to their fundamental functions because arcs will provoke growing harm and threat to aircraft safety. Experimental study has been done to obtain the faulted current data. In order to improve the detection speed and accuracy, two fast arc fault detection methods have been proposed in this paper with the analysis of only half cycle data. Both Fast Fourier Transform（FFT） and Wavelet Packets Decomposition（WPD） have been adopted to distinguish arc fault currents from normal operation currents. Analysis results show that Alternating Current（AC） arcs can be effectively and accurately detected with the proposed half cycle data based methods. Moreover,experimental verification results have also been provided.
文摘The solid state photochemical reaction of nitrobenzaldehyde with indole was investigated. Seven hey products were identified by IR, MS,^(1)H HMR and elemental analysis.
文摘Vertical Axis Wind Turbines (VAWTs) with fixed pitch blades have a limited power capture performance envelope as the Tip Speed Ratio (TSR) changes. Circulation Control (CC) has been proposed and simulated to possibly increase power capture of a VAWT using constant CC jet momentum, but a practical method of minimizing CC usage has yet to be explored. In addition, VAWTs are typically limited in power capture performance either by a maximum peak at a small set of TSR or wide operating TSR at fractions of the peak performance based on the design solidity. Both the reduced jet usage and solidity limitation were addressed by developing a method of dynamically using CC to perform a virtual solidity change. The developed method described within this work used CC to change blade aerodynamics to specifically match a maximum performing static solidity or wake shape at a given TSR. Simulation results using an existing aerodynamics model indicated a significant reduction in the re-quired CC jet momentum compared to a constant CC system along with control over power capture for a CC-VAWT.
文摘A discretization precision control method based on the second order osculating surface is proposed. The discretization precision of 3 D solid is controlled according to the error between the discrete solid surface and its second order osculating surface. The global maximal error has been gotten after analyzing all the extremums of the error function. It can be used in controlling and optimizing the discretization precision of 3 D solid in computer 3 D modeling and NC milling path generation.
基金supported by the Major State Basic Research Development Program(Grant No.F2000078100)the National Natural Science Foundation of China(No.20172059)the Found of Chinese Academy of Sciences.
文摘A solid-phase synthesis of 1α-hydroxylation of 5,6-trans-vitamin D3 8 is described.The solid phase resin acts as a special protecting group, which gives a higher stereoselectivity in oxidation step than classical protecting groups. The stereochemistry control is favored by using high crosslinkage polymer support in a poor solvent. This work may be of benefit to the synthesis of vitamin D system.
文摘A finite element method(FEM) for the numerical simulation of the columnar part of the mould-temperature-control solidification(MTCS) process was presented. The latent heat was taken into account and 3D transient heat transfer analysis was carried out by using the developed FEM software. The relative errors between the numerical and experimental data are less than 6%. Three MTCS cases were computed with this method. The first case only opens the cooling channels in the bottom of the mold. The second case individually controls the separate 7 groups of cooling channels by giving 7 control points. When the temperature of a control point reaches the preset value of 400℃, the corresponding channel will be opened. The third case opens all the cooling channels at the same time. The results indicate that in the second case, the solid-liquid interface keeps near-planar. The growth velocity of the solid-liquid interface is 0.3-0.4 mm/s, which is greater than 0.1-0.3 mm/s of the first case, performing better than the others. Thus the forming quality and efficiency part interior can be improved by mold-temperature-control and the numerical model is validated. The numerical simulation of MTCS can provide an available tool for the advanced investigation on the defect improvement and the crystal’s quality.
基金supported by the National Natural Science Foundation of China (No.51078035, 20977008)the Fundamental Research Funds for the Central Universities (No.JC2011-1, TD2010-5)+2 种基金the Ph.D.Programs Foundation of Ministry of Education of China (No.20100014110004)the High-Tech Research and Development Program (863)of China (No.2007AA06Z301)the Major Projects onthe Control and Rectification of Water Body Pollution (No.2008ZX07422-002-004, 2008ZX07314-006)
文摘Controlled shear stress （CSS） test was used to study the effect of solid contents on the corresponding rheological parameters for sludge. Three types of sludge with or without conditioning, including activated sludge （AS）, anaerobic digested sludge （ADS）, and water treatment residuals （WTRs）, were collected for the CSS test. Results showed that the yield stress and the cohesion energy of the sludge networks were improved with increased total suspending solid （TSS） contents in most cases. For the conditioned AS/ADS and the raw WTRs, exponential law was observed in the relationships between cohesion energy of material networks or yield stress and the TSS contents, whereas for the conditioned WTRs, only exponential law dependence was found between the parameters of shear modulus or critical strain and the TSS contents.
基金supported by the Western-Caucasus Research Center
文摘The main aim of this research is to get a better knowledge and understanding of the micro-scale oscillatory networks behavior in the solid propellants reactionary zones. Fundamental understanding of the micro-and nano-scale combustion mechanisms is essential to the development and further improvement of the next-generation technologies for extreme control of the solid propellant thrust. Both experiments and theory confirm that the micro-and nano-scale oscillatory networks excitation in the solid propellants reactionary zones is a rather universal phenomenon. In accordance with our concept,the micro-and nano-scale structures form both the fractal and self-organized wave patterns in the solid propellants reactionary zones. Control by the shape, the sizes and spacial orientation of the wave patterns allows manipulate by the energy exchange and release in the reactionary zones. A novel strategy for enhanced extreme thrust control in solid propulsion systems are based on manipulation by selforganization of the micro-and nano-scale oscillatory networks and self-organized patterns formation in the reactionary zones with use of the system of acoustic waves and electro-magnetic fields, generated by special kind of ring-shaped electric discharges along with resonance laser radiation. Application of special kind of the ring-shaped electric discharges demands the minimum expenses of energy and opens prospects for almost inertia-free control by combustion processes. Nano-sized additives will enhance self-organizing and self-synchronization of the micro-and nano-scale oscillatory networks on the nanometer scale. Suggested novel strategy opens the door for completely new ways for enhanced extreme thrust control of the solid propulsion systems.
基金Project supported by National Key Research and Development Program(2016YFB0302403)the National Natural Science Foundation of China(21571059)+1 种基金Natural Science Foundation of Hunan Province(2015JJ2100)Hunan Provincial Innovation Foundation for Postgraduate(CX2017B180)
文摘The designed Ce^3＋-doped alkaline-earth silicate phosphors CamSr2 m-nBanSiO4：Ce^3＋,Li^＋ （CSBS：Ce^3＋） were synthesized by a high temperature solid-state reaction. The crystal field splitting and the centroid shift from the flee ion energy of 5d configuration were approximated from the spectrum for Ca2SiO4, Sr2SiO4 and Ba2SiO4 phosphors. The single-phase purity was checked by means of X-ray diffraction. Here, when the doped concentration of Ca2. is less than 80% （m 〈 1.6）, we report the structural phase transformation from monoclinic system [3-Ca2Si04 to orthorhombic system α′-Ca2SiO4. The phosphors excited by near-ultraviolet （NUV） light at wavelengths ranging from 200 to 400 nm demonstrate a broad asymmetric blue emission band. The emission peak wavelength redshifts firstly from 417 nm of Ca2SiO4 to 438 nm of Sro.3Cal.6SiO4, and then blueshifts to 411 nm of Sr2SiO4, and the end of 401 nm of Ba2SiOa. These results indicate that the tunable blue-emission of the phosphors can he realized through changing the solid solution components, which has a potential use as a blue component for fabricated precision modulation LEDs light sources and auxiliaries of SSC plastics films for different plant growths. We discuss in detail the possible mechanism and energy diagram of the tunable blue luminescence in CamSr2-M-nBaNSiO4：Ce^3＋.Li^＋ phosphors.
基金supported by the National Natural Science Foundation of China (Nos. 11502086 and 11502087)
文摘The variation of mass, and moment of inertia of a spin-stabilized spacecraft leads to concern about the nutation instability. Here a careful analysis on the nutation instability is performed on a spacecraft propelled by solid rocket booster（SRB）. The influences of specific solid propellant designs on transversal angular velocity are discussed. The results show that the typical SRB of End Burn suppresses the non-principal axial angular velocity. On the contrary, the frequently used SRB of Radial Burn could amplify the transversal angular velocity. The nutation instability caused by a design of Radial Burn could be remedied by the addition of End Burn at the same time based on the study of the combination design of both End Burn and Radial Burn.The analysis of the results proposes the design conception of how to control the nutation motion.The method is suitable to resolve the nutation instability of solid rocket motor with complex propellant patterns.
基金supported by the National Natural Science Foundation of China (Nos. 51621005, 51676170)the Key Project for Strategic International Collaboration on Science and Technology Innovation of the National Key R&D Program of China (No. 2016YFE0202000)+1 种基金 the Fundamental Research Funds for the Central Universities (No. 2017FZA4013)the Academic Raising Star Training Program for PhD Student of Zhejiang University
文摘Chlorine(Cl) is extensively present in solid wastes, causing significant problems during the thermal conversion of waste to energy or fuels, by combustion, gasification or pyrolysis.This paper introduces the analytical methods for determining the Cl content in solid materials and presents the concentrations of Cl in various types of wastes, as reported in literature. Then, it provides a comprehensive analysis on the Cl emission behavior and Cl species formed during the thermal processing of the inorganic and organic Cl sources. The challenges resulted from the reactions between the formed Cl species and the ferrous metals, the heavy metals and the organic matters are summarized and discussed, e.g., high temperature corrosion, heavy metal evaporation and dioxin formation. The quality degradation of products(oil, char and syngas) by Cl is analyzed. Finally, the available controlling methods of Cl emission, including pre-treatment(water washing, sorting,microwave irradiation and stepwise pyrolysis) and in-furnace(absorbents, co-treatment and catalysts) methods are assessed.
文摘Silver nanoparticles were synthesized in reverse micelles consisting of sucrose fatty acid esters by dissolving reactant powder in the water pool of reverse micelles through the solid-liquid extraction. Silver nanoparticles having various sizes and shapes were obtained at high concentration. The size of silver nanoparticles was controlled by reaction temperature. Moreover, the size of silver nanoparticles was dependent upon the average esterification degree of sucrose fatty acid esters forming reverse micelles. The wavelength in the peaks, which corresponded upon the localized surface plasmon resonance of resultant silver nanoparticles, was correlated with their sizes.
基金Supported by the Doctor Research Fund of Henan University of Technology,China(No.2009BS027)
文摘A rapid and effective method, solid phase extraction coupled with high performance liquid chromatography（SPE-HPLC）, was applied to the separation and analysis of ginsenosides. Waters OASIS HLB was used for concentrating and purifying samples and Alltima C18（53 mm×7 mm, 3 μm） chromatography column was used for separating ginsenoside Rg1, Re, Rb1, Rc, Rb2 and Rd. These ginsenosides were analyzed within 20 min in our gradient elution process and the equilibrium time of the chromatography column cost only 5 min. Moreover, there was no obvious baseline drift in our experiment. This method was used to analyze the contents of ginsenosides in different ginseng products for quality control. Four ginseng products were studied, including two kinds of capsules, one kind of tablet and one kind of injection. The results show that the method developed in this paper had good accuracy, linearity and precision. Therefore, this method could be applied in quality control of ginseng products.
文摘The vibration and control of pipes conveying fluid is studied. The solid-liquid coupling vibration equations of the pipe conveying fluid are deduced by Hamilton principle.The direct velocity feedback is used to control the pipe vibration. The whip response and control are discussed.
