TiAIN solar selective absorbing coatings which were deposited on 304L stainless steel using cathodic arc evaporation method were annealed under non-vacuum at different temperatures with different times. The optical pr...TiAIN solar selective absorbing coatings which were deposited on 304L stainless steel using cathodic arc evaporation method were annealed under non-vacuum at different temperatures with different times. The optical properties （absorptance and emittance） of the coatings were measured by a spectrophotometer. It was found that, after being annealed for 2 hours at different temperatures, the absorptance of the coatings reached the highest value of 0.92 at 700 ℃ while the emittance got the lowest value of 0.38 at 800 ℃. When the coatings were annealed at 600 ℃ for 24 hours, the optical properties changed to 0.92/0.44 （absorptance/ emittance）. By measuring the structure, morphology, elements and surface roughness of the coatings, it was found that both the elemental composition and the surface roughness of the coatings changed as a result of annealing, and these changes caused the change of the optical properties of the coatings.展开更多
A series of selective solar absorber coatings of Cr-Cr_(2)O_(3)were deposited in different content on stainless steel by plasma spraying.The samples were annealed at different temperatures.The optical performance(both...A series of selective solar absorber coatings of Cr-Cr_(2)O_(3)were deposited in different content on stainless steel by plasma spraying.The samples were annealed at different temperatures.The optical performance(both the solar absorptance and the thermal emittance)were studied by spectrophotometry.The surface morphology,the structure and the surface roughness were investigated by scanning electron microscopy(SEM),X-ray diffraction(XRD),and roughmeter respectively.The results show that,as the content of Cr increased,the solar absorptance(α)decreased greatly,from 0.91 to 0.84.Meanwhile,the thermal emittance(ε)decreased more greatly,from 0.86 to about 0.64.The ratio between the solar absorptance and the thermal emittance increased from 1.06 to 1.31.Annealing had a great impact on the optical performance.Annealing temperature is an important element.But its influence was a little complex.To pure Cr coating,annealing at 500℃was a perfect chosen,where the ratio between the solar absorptance and the thermal emittance was highest of 1.46.展开更多
The Kubelka-Munk revised theory was adopted to derive the mix design theory of high solar reflectance and high emissivity coatings.When the concentration of each colorant is within 20%,and the width of the coating is ...The Kubelka-Munk revised theory was adopted to derive the mix design theory of high solar reflectance and high emissivity coatings.When the concentration of each colorant is within 20%,and the width of the coating is more than 200 μm,each colorant has enough covering power in visible and near-infrared spectral range.It can be assumed that the addition of colorants in coatings can only change the solar spectral absorption ratio rather than solar spectral scattering coefficient.The spectral scattering coefficient of coatings tends to a constant.The spectral absorption-scattering property of each colorant can be characterized through one parameter.The spectral absorption-scattering coefficient of coatings can be calculated with the multivariate linear relationship of each pigment.Moreover,the results can be expanded for high solar reflectivity and high long-wave emissivity coating preparation.The accuracy of Kubelka-Munk revised theory has been tested and verified through comparison between the calculated value and tested value of coating reflectance.展开更多
Transparent TiO2/TiN/TiO2 multi-layer solar control coatings were prepared on normal soda-lime-silica float glass substrate by using d.c. reactive magnetron sputtering at substrate temperature ranging from room temper...Transparent TiO2/TiN/TiO2 multi-layer solar control coatings were prepared on normal soda-lime-silica float glass substrate by using d.c. reactive magnetron sputtering at substrate temperature ranging from room temperature to 620℃ . The dependence of optical properties of the coatings and the coating composition, on the substrate temperature was studied. The results of the optical properties show that as the substrate temperature increases, a visible transmittance as high as 65% can be obtained. When the substrate temperature is higher than 370℃ , the infrared reflectance decreases. The results of X-ray photoelectron spectroscopy (XPS) show that when the substrate temperature is higher than 520℃ in oxygen atmosphere, the formation of thin surface over-layers (TiNxOy,) on top of the TiN films can be observed. When the substrate temperature is at 62℃ , the oxynitride become TiO2, which results in the optical degradation of TiN layer in infrared reflectance.展开更多
Based on the cermet double layer structure, Nb-NbN multi-layer films for solar selective coatings were deposited by direct current reactive magnetron sputtering. The Nb/Nb-NbN/Al2O3 trilayered structure was deposited ...Based on the cermet double layer structure, Nb-NbN multi-layer films for solar selective coatings were deposited by direct current reactive magnetron sputtering. The Nb/Nb-NbN/Al2O3 trilayered structure was deposited on a stainless steel (SS) substrate by using a single niobium target. The expected components were adjusted by changing the gas flowing ratios of Ar: N2. The Al2O3 antireflective layer on the top of the film was produced by r. f. magnetron sputtering using Al2O3 ceramic target. A solar absorptivity of 0.94 and a normal emissivity of 0.16 at room temperature have been achieved for the coating. Thermal vacuum aging to the samples was carried out at 350 and 500 ℃ for 1 h. The results show a good thermal stability. Microstructure and its dependence on temperature of the Nb, NbN and Nb-NbN single layers were investigated, respectively.展开更多
A cerium-iron oxide solar control coating on glass was prepared by citric acid sol-gel method, dip-coating techniques and proper heat treatment process. Results show that the cerium-iron glass coating is composed of n...A cerium-iron oxide solar control coating on glass was prepared by citric acid sol-gel method, dip-coating techniques and proper heat treatment process. Results show that the cerium-iron glass coating is composed of nanocrystalline CeO2, Fe2O3, and nano holes. The cerium-iron glass coating has high transmittance in visible light, low UV and near IR transmittance. The wavelength of absorption edge for most glass coating has an obvious redshift to about 375 nm. There exist a wide absorption band at the range of 800-1600 nm and high transmittance at the wavelength from 400 nm to 800 nm, and the solar energy and visible transmittances are 50% and 65%, respectively. It ascribes to the high content of trivalence cerium and bivalence iron ions in the cerium/iron coating. It is indicated that this kind of glass coating has very good UV-sheering and heat-insulating property, can be used as an effective solar control glass in automobile and architecture.展开更多
The thermal emittance of Cr film, as an IR reflector, was investigated for the use in SSAC. The Cr thin films with different thicknesses were deposited on silicon wafers, optical quartz and stainless steel substrates ...The thermal emittance of Cr film, as an IR reflector, was investigated for the use in SSAC. The Cr thin films with different thicknesses were deposited on silicon wafers, optical quartz and stainless steel substrates by cathodic arc ion plating technology as a metallic IR reflector layer in SSAC. The thickness of Cr thin films was optimized to achieve the minimum thermal emittance. The effects of structural, microstructural, optical, surface and cross-sectional morphological properties of Cr thin films were investigated on the emittance. An optimal thickness about 450 nm of the Cr thin film for the lowest total thermal emittance of 0.05 was obtained. The experimental results suggested that the Cr metallic thin film with optimal thickness could be used as an effective infrared reflector for the development of SSAC structure.展开更多
We reported a facile and bio-inspired strategy for obtaining antireflective （AR） coating through polymerization-induced self-wrinkling. Upon irradiation of light, the complex wrinkle micro-patterns with different mo...We reported a facile and bio-inspired strategy for obtaining antireflective （AR） coating through polymerization-induced self-wrinkling. Upon irradiation of light, the complex wrinkle micro-patterns with different morphologies were generated spontaneously on the surface of coating during photo-cross- linking, which enables the photo-curing coating can decrease reflection. The resulting photo-curing coating exhibits a high transmittance over 90% and low reflection below 5% ～ 8%, with an efficiency anti- reflection of 4% ～ 7%; compared to the flat blank coating. The successful application of these AR coatings with wrinkles pattern to encapsulate the thin film solar cells results in appreciable photovoltaic performance improvement of more than 4% ～ 8%, which benefits from the decrease of the light reflection and increase of optical paths in the photoactive layer by the introduction of wrinkling pattern. Furthermore, the efficiency improvements of the solar cells are more obvious, with a remarkable increase of 8.5%, at oblique light incident angle than that with vertical light incident angle展开更多
Solar selective absorbing coatings directly harvest solar energy in the form of heat.The higher temperatures are required to drive higher power-cycle efficiencies in favor of lower costs of energy.According to differe...Solar selective absorbing coatings directly harvest solar energy in the form of heat.The higher temperatures are required to drive higher power-cycle efficiencies in favor of lower costs of energy.According to different dielectrics,high temperature coatings can mainly be divided to double cermet solar selective coatings,transition metal nitride multilayer coatings and transition metal oxide multilayer coatings.This paper assesses the photothermal conversion efficiency and thermal stability,and discusses the challenges and strategies of improving both thermal and optical properties.Double cermet layers can stabilize nanocrystalline structures by alloying,while transition metal nitride/oxide layers generally choose the reliable materials with superior mechanical properties and thermal stability.The purpose of this review is to get the optimized systems,and propose further research directions at higher temperature,such as all-ceramic absorbing coatings.展开更多
High entropy alloys(HEAs),which is at the expense of high cost compared to traditional alloy,should not be confined to the mechanical properties,but should be employed to devise a novel combination with unique functio...High entropy alloys(HEAs),which is at the expense of high cost compared to traditional alloy,should not be confined to the mechanical properties,but should be employed to devise a novel combination with unique functional and mechanical performances.In this work,high entropy alloy nitride(HEAN)is utilized as a novel double absorption layer to improve solar absorption in the high temperature solar selective absorbing coatings(SSACs).Our primary motivation is to lower thermal emittance(ε)and enhance solar absorptance(a).In order to realize this goal,coating design(CODE)software is employed to design and optimize the proposed HEAN based SSACs using appropriate dielectric function model.The ultimate as-deposited coating shows good optical properties with a high a value of 0.965 and a lowεvalue of 0.086(at 82C).The estimate of thermal stability tests indicates that HEAN based SSACs has the ability to resist instability in high working temperature,which keeps good optical properties(a¼0.925,ε¼0.070)after annealing at 600C for 10 h.展开更多
Solar selective absorbing coatings(SSACs)are required to have not only excellent optical property but also outstanding thermal stability for high temperature applications.The optical properties of Mo/ZrSiN/ZrSiON/SiO_...Solar selective absorbing coatings(SSACs)are required to have not only excellent optical property but also outstanding thermal stability for high temperature applications.The optical properties of Mo/ZrSiN/ZrSiON/SiO_(2) SSAC had been optimized successfully before.Herein,we are focusing on the evaluation and mechanism of thermal stability of this multilayer coating for its potential applications in concentrated solar power(CSP)systems.Fortunately,the coating exhibits excellent thermal stability after aging at 400℃ for 1500 h in vacuum.At aging temperature of 500℃ for 1000 h or 600℃ for 300 h in vacuum,the slight inter-diffusion between Mo layer and stainless steel(SS)substrate occurs.At higher aging temperature of 700℃ for 100 h in vacuum,the serious inter-diffusion between Mo layer and SS substrate leads to invalidation of the coating,which has been evidenced by Rutherford backscattering spectrometry(RBS)and X-ray diffraction(XRD)technologies.Additionally,this coating also has an outstanding thermal stability after aging at 400℃for 300 h in air.A heating-cooling cycling(HCC)treatment evidences the good thermal stability of this coating working in cold environment(60℃).The results reveal that this coating can be a promising candidate not only for CSP system in high temperatures but also for usage in cold environment.展开更多
A new solar selective absorbing coating of Mo/NiAlN/NiAlON/SiO_2 multilayer was prepared on stainless steel(SS) substrates by magnetron sputtering for solar thermal power applications. The optical constants and thickn...A new solar selective absorbing coating of Mo/NiAlN/NiAlON/SiO_2 multilayer was prepared on stainless steel(SS) substrates by magnetron sputtering for solar thermal power applications. The optical constants and thickness of individual layers were simulated using the Scout software based on the experimentally measured reflectance and transmittance spectra of individual layers. The coating of Mo/NiAlN/NiAlON/SiO_2 with an ideal solar absorptance(α) of 0.945 in the solar spectrum range was designed via the optical constants of each layer in the Scout software. The Mo/NiAlN/NiAlON/SiO_2 coating was deposited via the optimized layer thickness. A good spectral selectivity with absorptance(α=0.936) and emittance(ε=0.09, T=80 ℃) was obtained. This method, which incorporates the optical simulation with the related experiments, provides a convenient approach to obtain the ideal solar selective absorbing coatings.展开更多
A new method of preparing CuO solar selective absorbing coating for medium temperature is presented.After pretreatment,brass was overlaid with CuO by chemical plating.The effects of reactant concentration,reaction tem...A new method of preparing CuO solar selective absorbing coating for medium temperature is presented.After pretreatment,brass was overlaid with CuO by chemical plating.The effects of reactant concentration,reaction tem-perature and reaction time on the absorptivity of CuO coating were investigated.The optimized condition of preparing CuO coating was obtained.The CuO coating was analyzed with X-ray photoelectron spectroscopy(XPS)and scanning electron microscopy(SEM).In order to prolong the period of use,the CuO coating was protected by TiO2.The experi-ment shows that the TiO2/CuO coating is more heat-resistant,acid-resistant,and wear resistant than CuO coating,without losing absorptivity markedly.The TiO2 coating can reduce emissivity and protect the CuO coating.展开更多
With the development of new materials and technology,high entropy alloy(HEA)nitride films have attracted much attention of researchers due to their excellent optical properties and mechanical properties.Herein,a novel...With the development of new materials and technology,high entropy alloy(HEA)nitride films have attracted much attention of researchers due to their excellent optical properties and mechanical properties.Herein,a novel SS/NbMoTaWN(HEAN)/NbMoTaWON(HEAON)/SiO_(2) coatings are prepared,which shows a high spectral selectivity of a/ε=0.944/0.12.The preparation and optimization of the coating are studied by combining experiments with ellipsometric program and CODE software.High temperature thermal stability test is performed in depth,which proves that the coating could bear 400℃ in air for 2 h,and 600℃for 2 h in vacuum.Long-term thermal stability researches indicate that the SSACs still keep good optical properties(a=0.902,ε=0.106)even after annealing at 600℃ for 100 h.The failure mechanism is analyzed by XRD and Raman spectra.In addition,neutral salt spray test is performed to investigate the anti-corrosion ability,which indicates the coating has a good optical performance after soaking in 3.5 wt%NaCl solution for 30 days.Obviously,this work provides a new strategy to construct solar absorber coatings based on NbMoTaW high entropy alloy.展开更多
基金Funded by the "863" Hi-Tech Project of China(No.2009AA05Z440)
文摘TiAIN solar selective absorbing coatings which were deposited on 304L stainless steel using cathodic arc evaporation method were annealed under non-vacuum at different temperatures with different times. The optical properties （absorptance and emittance） of the coatings were measured by a spectrophotometer. It was found that, after being annealed for 2 hours at different temperatures, the absorptance of the coatings reached the highest value of 0.92 at 700 ℃ while the emittance got the lowest value of 0.38 at 800 ℃. When the coatings were annealed at 600 ℃ for 24 hours, the optical properties changed to 0.92/0.44 （absorptance/ emittance）. By measuring the structure, morphology, elements and surface roughness of the coatings, it was found that both the elemental composition and the surface roughness of the coatings changed as a result of annealing, and these changes caused the change of the optical properties of the coatings.
文摘A series of selective solar absorber coatings of Cr-Cr_(2)O_(3)were deposited in different content on stainless steel by plasma spraying.The samples were annealed at different temperatures.The optical performance(both the solar absorptance and the thermal emittance)were studied by spectrophotometry.The surface morphology,the structure and the surface roughness were investigated by scanning electron microscopy(SEM),X-ray diffraction(XRD),and roughmeter respectively.The results show that,as the content of Cr increased,the solar absorptance(α)decreased greatly,from 0.91 to 0.84.Meanwhile,the thermal emittance(ε)decreased more greatly,from 0.86 to about 0.64.The ratio between the solar absorptance and the thermal emittance increased from 1.06 to 1.31.Annealing had a great impact on the optical performance.Annealing temperature is an important element.But its influence was a little complex.To pure Cr coating,annealing at 500℃was a perfect chosen,where the ratio between the solar absorptance and the thermal emittance was highest of 1.46.
基金Supported by the 12th Five-year National Science and Technology Support Plan(No.2011BAE27B04)the Natural Science Foundation of China(No.51378391)the China Scholarship Council(award to HE Yan for studying in the University of Toronto)
文摘The Kubelka-Munk revised theory was adopted to derive the mix design theory of high solar reflectance and high emissivity coatings.When the concentration of each colorant is within 20%,and the width of the coating is more than 200 μm,each colorant has enough covering power in visible and near-infrared spectral range.It can be assumed that the addition of colorants in coatings can only change the solar spectral absorption ratio rather than solar spectral scattering coefficient.The spectral scattering coefficient of coatings tends to a constant.The spectral absorption-scattering property of each colorant can be characterized through one parameter.The spectral absorption-scattering coefficient of coatings can be calculated with the multivariate linear relationship of each pigment.Moreover,the results can be expanded for high solar reflectivity and high long-wave emissivity coating preparation.The accuracy of Kubelka-Munk revised theory has been tested and verified through comparison between the calculated value and tested value of coating reflectance.
基金Funded by Key Natural Science Foundation of China Minis-try of Education and Natural Science Foundation for Key Teacher (No.99087).
文摘Transparent TiO2/TiN/TiO2 multi-layer solar control coatings were prepared on normal soda-lime-silica float glass substrate by using d.c. reactive magnetron sputtering at substrate temperature ranging from room temperature to 620℃ . The dependence of optical properties of the coatings and the coating composition, on the substrate temperature was studied. The results of the optical properties show that as the substrate temperature increases, a visible transmittance as high as 65% can be obtained. When the substrate temperature is higher than 370℃ , the infrared reflectance decreases. The results of X-ray photoelectron spectroscopy (XPS) show that when the substrate temperature is higher than 520℃ in oxygen atmosphere, the formation of thin surface over-layers (TiNxOy,) on top of the TiN films can be observed. When the substrate temperature is at 62℃ , the oxynitride become TiO2, which results in the optical degradation of TiN layer in infrared reflectance.
基金This work was financially supported by the National Natural Science Foundation of China (NSFC) (No.50471004), Program for New Century Excellent Talents in University (NCET) and Foundation from Engineering Research Institute, Peking University(ERIPKU)(No.204031).
文摘Based on the cermet double layer structure, Nb-NbN multi-layer films for solar selective coatings were deposited by direct current reactive magnetron sputtering. The Nb/Nb-NbN/Al2O3 trilayered structure was deposited on a stainless steel (SS) substrate by using a single niobium target. The expected components were adjusted by changing the gas flowing ratios of Ar: N2. The Al2O3 antireflective layer on the top of the film was produced by r. f. magnetron sputtering using Al2O3 ceramic target. A solar absorptivity of 0.94 and a normal emissivity of 0.16 at room temperature have been achieved for the coating. Thermal vacuum aging to the samples was carried out at 350 and 500 ℃ for 1 h. The results show a good thermal stability. Microstructure and its dependence on temperature of the Nb, NbN and Nb-NbN single layers were investigated, respectively.
基金This work was financially supported by the Tsinghua University Fundamental Research Foundation (No.JCq2005045).
文摘A cerium-iron oxide solar control coating on glass was prepared by citric acid sol-gel method, dip-coating techniques and proper heat treatment process. Results show that the cerium-iron glass coating is composed of nanocrystalline CeO2, Fe2O3, and nano holes. The cerium-iron glass coating has high transmittance in visible light, low UV and near IR transmittance. The wavelength of absorption edge for most glass coating has an obvious redshift to about 375 nm. There exist a wide absorption band at the range of 800-1600 nm and high transmittance at the wavelength from 400 nm to 800 nm, and the solar energy and visible transmittances are 50% and 65%, respectively. It ascribes to the high content of trivalence cerium and bivalence iron ions in the cerium/iron coating. It is indicated that this kind of glass coating has very good UV-sheering and heat-insulating property, can be used as an effective solar control glass in automobile and architecture.
基金Funded by the National Natural Science Foundation of China(No.51402208)the Project by State Key Laboratory of Advanced Technology for Materials Synthesis and Processing(Wuhan University of Technology)(No.2016-KF-11)
文摘The thermal emittance of Cr film, as an IR reflector, was investigated for the use in SSAC. The Cr thin films with different thicknesses were deposited on silicon wafers, optical quartz and stainless steel substrates by cathodic arc ion plating technology as a metallic IR reflector layer in SSAC. The thickness of Cr thin films was optimized to achieve the minimum thermal emittance. The effects of structural, microstructural, optical, surface and cross-sectional morphological properties of Cr thin films were investigated on the emittance. An optimal thickness about 450 nm of the Cr thin film for the lowest total thermal emittance of 0.05 was obtained. The experimental results suggested that the Cr metallic thin film with optimal thickness could be used as an effective infrared reflector for the development of SSAC structure.
基金the National Natural Science Foundation of China (Nos. 21522403, 51373098)the National Basic Research Program (No. 2013CB834506)+1 种基金Education Commission of Shanghai Municipal Government (No. 15SG13)IFPM 2016B002 of Shanghai Jiao Tong University & Affiliated Sixth People’s Hospital South Campus for their financial support
文摘We reported a facile and bio-inspired strategy for obtaining antireflective （AR） coating through polymerization-induced self-wrinkling. Upon irradiation of light, the complex wrinkle micro-patterns with different morphologies were generated spontaneously on the surface of coating during photo-cross- linking, which enables the photo-curing coating can decrease reflection. The resulting photo-curing coating exhibits a high transmittance over 90% and low reflection below 5% ～ 8%, with an efficiency anti- reflection of 4% ～ 7%; compared to the flat blank coating. The successful application of these AR coatings with wrinkles pattern to encapsulate the thin film solar cells results in appreciable photovoltaic performance improvement of more than 4% ～ 8%, which benefits from the decrease of the light reflection and increase of optical paths in the photoactive layer by the introduction of wrinkling pattern. Furthermore, the efficiency improvements of the solar cells are more obvious, with a remarkable increase of 8.5%, at oblique light incident angle than that with vertical light incident angle
基金supported by National Natural Science Foundation of China(Grant no.51801178).
文摘Solar selective absorbing coatings directly harvest solar energy in the form of heat.The higher temperatures are required to drive higher power-cycle efficiencies in favor of lower costs of energy.According to different dielectrics,high temperature coatings can mainly be divided to double cermet solar selective coatings,transition metal nitride multilayer coatings and transition metal oxide multilayer coatings.This paper assesses the photothermal conversion efficiency and thermal stability,and discusses the challenges and strategies of improving both thermal and optical properties.Double cermet layers can stabilize nanocrystalline structures by alloying,while transition metal nitride/oxide layers generally choose the reliable materials with superior mechanical properties and thermal stability.The purpose of this review is to get the optimized systems,and propose further research directions at higher temperature,such as all-ceramic absorbing coatings.
基金supported by the Youth Innovation Promotion Association CAS(2018455)the regional key projects of science and technology service network program of Chinese Academy of Sciences(KFJ-STS-QYZD-139)+1 种基金the National Natural Science Foundation of China(No.51402315)the Key Research&Development Program in Gansu(18YF1GA125)and Scientific Research Project of Colleges and Universities in Gansu Province(No.2018D-03).The characterization results were supported by Beijing Zhongkebaice Technology Service Co.,Ltd.
文摘High entropy alloys(HEAs),which is at the expense of high cost compared to traditional alloy,should not be confined to the mechanical properties,but should be employed to devise a novel combination with unique functional and mechanical performances.In this work,high entropy alloy nitride(HEAN)is utilized as a novel double absorption layer to improve solar absorption in the high temperature solar selective absorbing coatings(SSACs).Our primary motivation is to lower thermal emittance(ε)and enhance solar absorptance(a).In order to realize this goal,coating design(CODE)software is employed to design and optimize the proposed HEAN based SSACs using appropriate dielectric function model.The ultimate as-deposited coating shows good optical properties with a high a value of 0.965 and a lowεvalue of 0.086(at 82C).The estimate of thermal stability tests indicates that HEAN based SSACs has the ability to resist instability in high working temperature,which keeps good optical properties(a¼0.925,ε¼0.070)after annealing at 600C for 10 h.
基金the financial support by the National Natural Science Foundation of China(NSFC)(Nos.51732001,U1832219 and 51972013)Beijing Natural Science Foundation(No.2182035)the Fundamental Research Funds for the Central Universities.
文摘Solar selective absorbing coatings(SSACs)are required to have not only excellent optical property but also outstanding thermal stability for high temperature applications.The optical properties of Mo/ZrSiN/ZrSiON/SiO_(2) SSAC had been optimized successfully before.Herein,we are focusing on the evaluation and mechanism of thermal stability of this multilayer coating for its potential applications in concentrated solar power(CSP)systems.Fortunately,the coating exhibits excellent thermal stability after aging at 400℃ for 1500 h in vacuum.At aging temperature of 500℃ for 1000 h or 600℃ for 300 h in vacuum,the slight inter-diffusion between Mo layer and stainless steel(SS)substrate occurs.At higher aging temperature of 700℃ for 100 h in vacuum,the serious inter-diffusion between Mo layer and SS substrate leads to invalidation of the coating,which has been evidenced by Rutherford backscattering spectrometry(RBS)and X-ray diffraction(XRD)technologies.Additionally,this coating also has an outstanding thermal stability after aging at 400℃for 300 h in air.A heating-cooling cycling(HCC)treatment evidences the good thermal stability of this coating working in cold environment(60℃).The results reveal that this coating can be a promising candidate not only for CSP system in high temperatures but also for usage in cold environment.
基金National Natural Science Foundation of China (No.51172012 and No.51472017)State Key Lab of Advance Metals and Materials (2014-ZD03)Foundation of Beijing Municipal Science & Technology Commission
文摘A new solar selective absorbing coating of Mo/NiAlN/NiAlON/SiO_2 multilayer was prepared on stainless steel(SS) substrates by magnetron sputtering for solar thermal power applications. The optical constants and thickness of individual layers were simulated using the Scout software based on the experimentally measured reflectance and transmittance spectra of individual layers. The coating of Mo/NiAlN/NiAlON/SiO_2 with an ideal solar absorptance(α) of 0.945 in the solar spectrum range was designed via the optical constants of each layer in the Scout software. The Mo/NiAlN/NiAlON/SiO_2 coating was deposited via the optimized layer thickness. A good spectral selectivity with absorptance(α=0.936) and emittance(ε=0.09, T=80 ℃) was obtained. This method, which incorporates the optical simulation with the related experiments, provides a convenient approach to obtain the ideal solar selective absorbing coatings.
基金supported by the Analysis Centre of Tianjin University.
文摘A new method of preparing CuO solar selective absorbing coating for medium temperature is presented.After pretreatment,brass was overlaid with CuO by chemical plating.The effects of reactant concentration,reaction tem-perature and reaction time on the absorptivity of CuO coating were investigated.The optimized condition of preparing CuO coating was obtained.The CuO coating was analyzed with X-ray photoelectron spectroscopy(XPS)and scanning electron microscopy(SEM).In order to prolong the period of use,the CuO coating was protected by TiO2.The experi-ment shows that the TiO2/CuO coating is more heat-resistant,acid-resistant,and wear resistant than CuO coating,without losing absorptivity markedly.The TiO2 coating can reduce emissivity and protect the CuO coating.
基金This workwas financially supported by the regional key projects of science and technology service network program of Chinese Academy of Sciences(KFJ-STS-QYZD-139)the Youth Innovation Promotion Association CAS(2018455)the Major Science and Technology Projects of Gansu Province(20ZD7GF011).
文摘With the development of new materials and technology,high entropy alloy(HEA)nitride films have attracted much attention of researchers due to their excellent optical properties and mechanical properties.Herein,a novel SS/NbMoTaWN(HEAN)/NbMoTaWON(HEAON)/SiO_(2) coatings are prepared,which shows a high spectral selectivity of a/ε=0.944/0.12.The preparation and optimization of the coating are studied by combining experiments with ellipsometric program and CODE software.High temperature thermal stability test is performed in depth,which proves that the coating could bear 400℃ in air for 2 h,and 600℃for 2 h in vacuum.Long-term thermal stability researches indicate that the SSACs still keep good optical properties(a=0.902,ε=0.106)even after annealing at 600℃ for 100 h.The failure mechanism is analyzed by XRD and Raman spectra.In addition,neutral salt spray test is performed to investigate the anti-corrosion ability,which indicates the coating has a good optical performance after soaking in 3.5 wt%NaCl solution for 30 days.Obviously,this work provides a new strategy to construct solar absorber coatings based on NbMoTaW high entropy alloy.
