In an earlier study of the Diexi ancient dammed lake along the Minjiang River in Southwest China,10 disturbed layers with envelope and flame structures were found in more than 240 m of lacustrine sediments.In this pap...In an earlier study of the Diexi ancient dammed lake along the Minjiang River in Southwest China,10 disturbed layers with envelope and flame structures were found in more than 240 m of lacustrine sediments.In this paper,the soft-sediment disturbances caused by earthquakes in the Diexi ancient dammed lake were studied based on field investigations and laboratory core observations.A two-to three-degree-of-freedom spring-type earthquake simulation vibration table was used to carry out disturbance tests on lacustrine sediments under different dynamic conditions.The results support the following conclusions:(1)The disturbance layers in the lacustrine sediments were caused by strong earthquakes in the region.(2)The characteristics of the disturbance layers are related to the seismic parameters and the degree of sediment consolidation.(3)The greater the earthquake intensity is,the greater the disturbance amplitude is;moreover,the lower the consolidation degree is,the greater the disturbance amplitude.(4)The simulation tests verify that the disturbance layers in the sediments of the Diexi ancient dammed lake correspond to strong earthquakes in the region.These results are valuable for ongoing palaeoseismic research in the region.展开更多
Detailed fieldwork carried out in the southern part of Bida Basin, Nigeria, allowed the documentation of soft sediment deformation structures (SSDS) in the Maastrichtian Patti Formation. The aim of this study is to ex...Detailed fieldwork carried out in the southern part of Bida Basin, Nigeria, allowed the documentation of soft sediment deformation structures (SSDS) in the Maastrichtian Patti Formation. The aim of this study is to examine the sedimentary successions, describe and analyse these deformation features, discuss their deformation mechanisms and potential triggers. The Maastrichtian Patti Formation is composed of lithofacies interpreted to have been deposited in tidal and fluvial sedimentary environments. Soft sediment deformation structures recognised in the tidal sediments were clastic dykes, load cast, isolated sand balls, dish-and-pillar structures, convolute lamination, diapiric structures and recumbent folds. Severely deformed cross beds, ring structures, associated sand balls, normal folds and recumbent folds were identified in the fluvial sediments. SSDS recognised were interpreted to have been caused by effects of liquefaction and fluidization. Field observations, facies analysis and morphology of the SSDS indicate that there are relationship between the depositional environments and SSDS. Endogenic processes are considered as the trigger agents and they are represented by rapid sedimentation and overloading, impact of breaking waves, pressure fluctuations caused by turbulent water flow, cyclic stress and current generated by storm waves and changes in water table. The present study did not identify exogenic processes as trigger agent. The occurrence of SSDS in southern Bida Basin strongly favoured a non-tectonic origin but a clear relationship high energy processes in tidal and fluvial depositional environments.展开更多
Intervals of soft-sediment deformation structures are well-exposed in Jurassic lacustrine deposits in the western Qaidamu basin. Through field observation, many soft-sediment deformation structures can be identified, ...Intervals of soft-sediment deformation structures are well-exposed in Jurassic lacustrine deposits in the western Qaidamu basin. Through field observation, many soft-sediment deformation structures can be identified, such as convoluted bedding, liquefied sand veins, load and flame structures, slump structures and sliding-overlapping structures. Based on their genesis, soft-sediment deformation structures can be classified as three types： seismic induced structures, vertical loading structures, and horizontal shear structures. Based on their geometry and genesis analysis, they are seismic-induced structures. According to the characteristics of convoluted bedding structures and liquefied sand veins, it can be inferred that there were earthquakes greater than magnitude 6 in the study area during the middle Jurassic. Furthermore, the study of the slump structures and sliding- overlapping structures indicates that there was a southeastern slope during the middle Jurassic. Since the distance from the study area to the Altyn Mountain and the Altyn fault is no more than 10km, it can be also inferred that the Altyn Mountain existed then and that the AItyn strike-slip fault was active during the middle Jurassic.展开更多
The deformation structure of soft sediments has always been a research hotspot,which is of great significance for analyzing the tectonic and sedimentary evolution background of a basin,as well as the physical properti...The deformation structure of soft sediments has always been a research hotspot,which is of great significance for analyzing the tectonic and sedimentary evolution background of a basin,as well as the physical properties of reservoirs.Previous studies have reported that a large number of soft sediment deformation structures are developed in the western part of Liaohe depression.In this study,through core observation and thin section identification,various types of deformation structures are identified in the core samples which are collected from the upper Es4 in the Leijia region,western sag of Liaohe depression,such as liquefied dikes,liquefied breccia,convoluted laminae,annular bedding,synsedimentary faults,vein structures,etc.Based on the characteristics of core structure,single well profile and continuous well profile,combined with the regional background,this study clarifies that the deformation structure of soft sediments in the study area is mainly caused by seismic action.It is found that the permeability and porosity of deformation layers in the study area are higher than those of the undeformation layers,which proves that the deformation structure of soft sediments has a good effect on improving the physical properties of reservoirs.展开更多
Devonian in the North Qilian orogenic belt and Hexi Corridor developed terrestrial molasse of later stage of foreland basin caused by collision between the North China plate and Qaidam microplate. The foreland basin t...Devonian in the North Qilian orogenic belt and Hexi Corridor developed terrestrial molasse of later stage of foreland basin caused by collision between the North China plate and Qaidam microplate. The foreland basin triggered a intense earthquake, and formed seismites and earthquake-related soft-sediment deformation. The soft-sediment deformation structures of Devonian in the eastern North Qilian Mts. consist of seismo-cracks, sandstone dykes, syn-depositional faults, microfoids （micro-corrugated lamination）, fluidized veins, load casts, flame structures, pillow structures and brecciation. The seismo-cracks, syn-depositional faults and microfolds are cracks, faults and folds formed directly by oscillation of earthquake. The seismic dykes formed by sediment instilling into seismic cracks. Fluidized veins were made by instilling into the seismo-fissures of the fluidized sands. The load casts, flame structures and pillow structures were formed by sinking and instilling caused from oscillation of earthquake along the face between sandy and muddy beds. The brecciation resulted from the oscillation of earthquake and cracking of sedimentary layers. The seismites and soft-sediment deformations in Devonian triggered the earthquake related to tectonic activities during the orogeny and uplift of North Qilian Mts.展开更多
The sinkage of a moving tracked mining vehicle is greatly af fected by the combined compression-shear rheological properties of soft deep-sea sediments. For test purposes, the best sediment simulant is prepared based ...The sinkage of a moving tracked mining vehicle is greatly af fected by the combined compression-shear rheological properties of soft deep-sea sediments. For test purposes, the best sediment simulant is prepared based on soft deep-sea sediment from a C-C poly-metallic nodule mining area in the Pacific Ocean. Compressive creep tests and shear creep tests are combined to obtain compressive and shear rheological parameters to establish a combined compressive-shear rheological constitutive model and a compression-sinkage rheological constitutive model. The combined compression-shear rheological sinkage of the tracked mining vehicle at dif ferent speeds is calculated using the Recur Dyn software with a selfprogrammed subroutine to implement the combined compression-shear rheological constitutive model. The model results are compared with shear rheological sinkage and ordinary sinkage(without consideration of rheological properties). These results show that the combined compression-shear rheological constitutive model must be taken into account when calculating the sinkage of a tracked mining vehicle. The combined compression-shear rheological sinkage decrease with vehicle speed and is the largest among the three types of sinkage. The developed subroutine in the Recur Dyn software can be used to study the performance and structural optimization of moving tracked mining vehicles.展开更多
The authors introduced two kinds of newly found soft-sediment deformation-synsedimentary extension structure and syn-sedimentary compression structure, and discuss their origins and constraints on basin tectonic evolu...The authors introduced two kinds of newly found soft-sediment deformation-synsedimentary extension structure and syn-sedimentary compression structure, and discuss their origins and constraints on basin tectonic evolution. One representative of the syn-sedimentary extension structure is syn-sedimentary boudinage structure, while the typical example of the syn-sedimentary compression structure is compression sand pillows or compression wrinkles. The former shows NW-SE-trendlng contemporaneous extension events related to earthquakes in the rift basin near a famous Fe-Nb-REE deposit in northern China during the Early Paleozoic （or Mesoproterozoic as proposed by some researches）, while the latter indicates NE-SW-trending contemporaneous compression activities related to earthquakes in the Middle Triassic in the Nanpanjiang remnant basin covering south Guizhou, northwestern Guangxi and eastern Yunnan in southwestern China. The syn-sedimentary boudinage structure was found in an earthquake slump block in the lower part of the Early Paleozoic Sailinhudong Group, 20 km to the southeast of Bayan Obo, Inner Mongolia, north of China. The slump block is composed of two kinds of very thin layers-pale-gray micrite （microcrystalline limestone） of 1-2 cm thick interbedded with gray muddy micrite layers with the similar thickness. Almost every thin muddy micrite layer was cut into imbricate blocks or boudins by abundant tiny contemporaneous faults, while the interbedded micrite remain in continuity. Boudins form as a response to layer-parallel extension （and/or layer-perpendicular flattening） of stiff layers enveloped top and bottom by mechanically soft layers. In this case, the imbricate blocks cut by the tiny contemporaneous faults are the result of abrupt horizontal extension of the crust in the SE-NW direction accompanied with earthquakes. Thus, the rock block is, in fact, a kind of seismites. The syn-sedimentary boudins indicate that there was at least a strong earthquake belt on the southeast side of the basin during the early stage of the Sailinhudong Group. This may be a good constraint on the tectonic evolution of the Bayan Obo area during the Early Paleozoic time. The syn-sedimentary compression structure was found in the Middle Triassic flysch in the Nanpanjiang Basin. The typical structures are compression sand pillows and compression wrinkles. Both of them were found on the bottoms of sand units and the top surface of the underlying mud units. In other words, the structures were found only in the interfaces between the graded sand layer and the underlying mud layer of the flysch. A deformation experiment with dough was conducted, showing that the tectonic deformation must have been instantaneous one accompanied by earthquakes. The compression sand pillows or wrinkles showed uniform directions along the bottoms of the sand layer in the flysch, revealing contemporaneous horizontal compression during the time between deposition and diagenesis of the related beds. The Nanpanjiang Basin was affected, in general, with SSW-NNE compression during the Middle Triassic, according to the syn-sedimentary compression structure. The two kinds of syn-sedimentary tectonic deformation also indicate that the related basins belong to a rift basin and a remnant basin, respectively, in the model of Wilson Cycle.展开更多
With the objective of establishing a distinction between deformation structures caused by freeze/thaw cycles and those resulting from seismic activity, we studied three well–exposed alluvial deposits in a section at ...With the objective of establishing a distinction between deformation structures caused by freeze/thaw cycles and those resulting from seismic activity, we studied three well–exposed alluvial deposits in a section at Dogai Coring, northern Qiangtang Basin, Tibetan Plateau. Deformation is present in the form of plastic structures(diapirs, folds and clastic dykes), brittle structures(micro–faults) and cryogenic wedges. These soft–sediment deformation features(except the micro–faults) are mainly characterized by meter–scale, non–interlayered, low–speed and low–pressure displacements within soft sediments, most commonly in the form of plastic deformation. Taking into account the geographic setting, lithology and deformation features, we interpret these soft–sediment deformation features as the products of freeze/thaw cycles, rather than of earthquake–induced shock waves, thus reflecting regional temperature changes and fluctuations of hydrothermal conditions in the uppermost sediments. The micro–faults(close to linear hot springs) are ascribed to regional fault activity;however, we were unable to identify the nature of the micro–faults, perhaps due to disturbance by subsequent freeze/thaw cycles. This study may serve as a guide to recognizing the differences between deformation structures attributed to freeze/thaw cycles and seismic processes.展开更多
Soft-sediment deformation structures are abundant in the Cambrian Zhushadong and Mantou formations of the Dengfeng area, Henan Province, China. Soft-sediment deformation structures of the Zhushadong Formation consist ...Soft-sediment deformation structures are abundant in the Cambrian Zhushadong and Mantou formations of the Dengfeng area, Henan Province, China. Soft-sediment deformation structures of the Zhushadong Formation consist of fluidized deformation, synsedimentary faults, seismo-folds and plastic deformation; the Mantou Formation is dominated by small-scale horst faults, intruded dikes, fluidized veins, and seismo-cracks. These structures are demonstrated to be earthquake-related by analysis of trigger mechanisms, and may indicate the activity of the Qinling tectonic belt during the early Cambrian. Furthermore, the assemblages of soft-sediment deformation structures altered with time： large-scale, intense deformation in the Zhushadong Formation alters to small-scale, weak deformation in the Mantou Formation. This striking feature may have been caused by changes in hypocentral depth from deep-focus to shallow-focus earthquakes, indicating that the Qinling tectonic belt developed from the subduction of the Shangdan Ocean to the extension of the Erlangping back-arc basin. This study suggests that soft-sediment deformation structures can be used to reveal the activity of a tectonic belt, and, more importantly, changes in deformation assemblages can track the evolution of a tectonic belt.展开更多
A particular type of soft-sediment deformation structure, similar to imbricate structure, is developed in the Jurassic strata at Honggouzi, western Qaidam Basin, China. We refer to this structure as a duplex-like defo...A particular type of soft-sediment deformation structure, similar to imbricate structure, is developed in the Jurassic strata at Honggouzi, western Qaidam Basin, China. We refer to this structure as a duplex-like deformation structure, because it is inferred to have been formed by the action of fast-moving, submarine gravity current sediments gliding across a pre-existing semiconsolidated sedimentary layer. The layers of duplex-like structure crop out in the southeastern limb of the core of a medium-sized anticline. The average dip direction of the duplex-like structure is 301.2° and the average dip angle is 54.7°. Duplex-like deformed laminations are composed mainly of weakly metamorphosed, extremely poorly sorted, feldspathic lithic graywacke. Sericite can be observed along bedding planes. The duplex-like structure occurs within a sequence of river-channel fine conglomerate, interchannel carbonaceous mudstone（shale）, shallow-water delta sand-shale, shallow-lake calcareous mudstone, olistostromes, and a turbidite. At the bottom of the sequence, we found brownish-red shallow-lake calcareous mudstone and carbonaceous mudstone and at the top olistostromes whose genesis is related to the slip and drag of a slumped body of submarine sediment. In combination with other symbiotic and associated structures, it is considered that the duplex-like structure was formed by the slumping and subsequent movement and traction of delta-front semiconsolidated sediments over the bottom sediments of a shore or shallow-lake sedimentary environment, probably triggered by an earthquake. The attitude of the duplex-like structure indicates that the direction of gliding was from NW301.2° toward SE121°, which is consistent with the current location of the Altun Mountains, indicating that the Altun Mountains existed in the Jurassic. The orogenesis of these mountains likely involved seismic activity, and an earthquake was the triggering factor in the formation of the duplex-like structure by causing the slumping/gliding of the olistostrome sediments.展开更多
笔者对香山–天景山断裂带东南段——庙山断褶带–清水河盆地中部地区的软沉积变形构造进行系统分析,填补了该断裂东南段活动构造及古地震历史研究的空白,为区域地震危险性评价提供了新证据。通过对清水河盆地中部河湖相沉积及盆地边缘...笔者对香山–天景山断裂带东南段——庙山断褶带–清水河盆地中部地区的软沉积变形构造进行系统分析,填补了该断裂东南段活动构造及古地震历史研究的空白,为区域地震危险性评价提供了新证据。通过对清水河盆地中部河湖相沉积及盆地边缘黄土沉积中软沉积变形构造的详细刻画和年代学约束,发现盆地中部广泛发育的软沉积变形构造主要包括假断层、滑塌构造、荷载构造、火焰状构造、变形层理、碎屑岩脉及张裂脉等,其形成时限约为11270±1100 a B.P.~7728±36 a B.P.。大多数变形构造多与假断层共生,形成具有定向特征的特定变形组合,并与盆地边缘黄土沉积中的张裂脉体层位相当,形成时代一致,呈现显著的地震触发特征,可能是对香山–天景山断裂带左旋走滑尾端效应的地表响应。研究揭示了庙山断褶带在全新世早期的显著地震活动,推测震中位于庙山断褶带中部地区,震级约为6.5≤M<7.3。本研究可为黄土覆盖区的活动构造研究、古地震历史重建及地震危险性评估提供重要的参考依据。展开更多
Deep-sea mining has emerged as a critical solution to address global resource shortages;however,the mechanical interaction between tracked mining vehicles(TMVs)and soft seabed sediments presents fundamental engineerin...Deep-sea mining has emerged as a critical solution to address global resource shortages;however,the mechanical interaction between tracked mining vehicles(TMVs)and soft seabed sediments presents fundamental engineering challenges.This study establishes a multiscale modelling framework coupling the discrete element method(DEM)with multi-body dynamics(MBD)to investigate track-seabed dynamic interactions across three operational modes:flat terrain,slope climbing,and ditch surmounting.The simulation framework,validated against laboratory experiments,systematically evaluates the influence of grouser geometry(involute,triangular,and pin-type)and traveling speed(0.2–1.0 m/s)on traction performance,slip rate,and ground pressure distribution.Results reveal rate-dependent traction mechanisms governed by soil microstructural responses:higher speeds enhance peak traction but exacerbate slip instability on complex terrain.Critical operational thresholds are established—0.7 m/s for flat terrain,≤0.5 m/s for slopes and ditches—with distinct grouser optimization strategies:involute grousers achieve 35%–40%slip reduction on slopes through progressive soil engagement,while triangular grousers provide optimal impact resistance during ditch crossing with 30%–35%performance improvement.These findings provide quantitative design criteria and operational guidelines for optimizing TMV structural parameters and control strategies,offering a robust theoretical foundation for enhancing the performance,safety,and reliability of deep-sea mining equipment in complex submarine environments.展开更多
基金funded by the National Natural Science Foundation of China(No.41977226)the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(No.SKLGP2016Z015)。
文摘In an earlier study of the Diexi ancient dammed lake along the Minjiang River in Southwest China,10 disturbed layers with envelope and flame structures were found in more than 240 m of lacustrine sediments.In this paper,the soft-sediment disturbances caused by earthquakes in the Diexi ancient dammed lake were studied based on field investigations and laboratory core observations.A two-to three-degree-of-freedom spring-type earthquake simulation vibration table was used to carry out disturbance tests on lacustrine sediments under different dynamic conditions.The results support the following conclusions:(1)The disturbance layers in the lacustrine sediments were caused by strong earthquakes in the region.(2)The characteristics of the disturbance layers are related to the seismic parameters and the degree of sediment consolidation.(3)The greater the earthquake intensity is,the greater the disturbance amplitude is;moreover,the lower the consolidation degree is,the greater the disturbance amplitude.(4)The simulation tests verify that the disturbance layers in the sediments of the Diexi ancient dammed lake correspond to strong earthquakes in the region.These results are valuable for ongoing palaeoseismic research in the region.
文摘Detailed fieldwork carried out in the southern part of Bida Basin, Nigeria, allowed the documentation of soft sediment deformation structures (SSDS) in the Maastrichtian Patti Formation. The aim of this study is to examine the sedimentary successions, describe and analyse these deformation features, discuss their deformation mechanisms and potential triggers. The Maastrichtian Patti Formation is composed of lithofacies interpreted to have been deposited in tidal and fluvial sedimentary environments. Soft sediment deformation structures recognised in the tidal sediments were clastic dykes, load cast, isolated sand balls, dish-and-pillar structures, convolute lamination, diapiric structures and recumbent folds. Severely deformed cross beds, ring structures, associated sand balls, normal folds and recumbent folds were identified in the fluvial sediments. SSDS recognised were interpreted to have been caused by effects of liquefaction and fluidization. Field observations, facies analysis and morphology of the SSDS indicate that there are relationship between the depositional environments and SSDS. Endogenic processes are considered as the trigger agents and they are represented by rapid sedimentation and overloading, impact of breaking waves, pressure fluctuations caused by turbulent water flow, cyclic stress and current generated by storm waves and changes in water table. The present study did not identify exogenic processes as trigger agent. The occurrence of SSDS in southern Bida Basin strongly favoured a non-tectonic origin but a clear relationship high energy processes in tidal and fluvial depositional environments.
基金The National Natural Science Fund(No:41172093)the research fund(No:2003042500820060425509)for the doctoral program of higher education from Ministry of Education for their financial support
文摘Intervals of soft-sediment deformation structures are well-exposed in Jurassic lacustrine deposits in the western Qaidamu basin. Through field observation, many soft-sediment deformation structures can be identified, such as convoluted bedding, liquefied sand veins, load and flame structures, slump structures and sliding-overlapping structures. Based on their genesis, soft-sediment deformation structures can be classified as three types： seismic induced structures, vertical loading structures, and horizontal shear structures. Based on their geometry and genesis analysis, they are seismic-induced structures. According to the characteristics of convoluted bedding structures and liquefied sand veins, it can be inferred that there were earthquakes greater than magnitude 6 in the study area during the middle Jurassic. Furthermore, the study of the slump structures and sliding- overlapping structures indicates that there was a southeastern slope during the middle Jurassic. Since the distance from the study area to the Altyn Mountain and the Altyn fault is no more than 10km, it can be also inferred that the Altyn Mountain existed then and that the AItyn strike-slip fault was active during the middle Jurassic.
基金funded by the National Natural Science Foundation“Event Sedimentation in Lacustrine Organic-Rich Mudrock:Taking the Chang 7-8 Member of the Ordos Basin as an Example”(Grant No.41802130).
文摘The deformation structure of soft sediments has always been a research hotspot,which is of great significance for analyzing the tectonic and sedimentary evolution background of a basin,as well as the physical properties of reservoirs.Previous studies have reported that a large number of soft sediment deformation structures are developed in the western part of Liaohe depression.In this study,through core observation and thin section identification,various types of deformation structures are identified in the core samples which are collected from the upper Es4 in the Leijia region,western sag of Liaohe depression,such as liquefied dikes,liquefied breccia,convoluted laminae,annular bedding,synsedimentary faults,vein structures,etc.Based on the characteristics of core structure,single well profile and continuous well profile,combined with the regional background,this study clarifies that the deformation structure of soft sediments in the study area is mainly caused by seismic action.It is found that the permeability and porosity of deformation layers in the study area are higher than those of the undeformation layers,which proves that the deformation structure of soft sediments has a good effect on improving the physical properties of reservoirs.
基金supported by the National Natural Science Foundation of China(NO,40672080,40621002)the Program for Innovative Research Team in University of the Ministry of Education of China(IRT00546)"111 Project"(Grant No.B08030)
文摘Devonian in the North Qilian orogenic belt and Hexi Corridor developed terrestrial molasse of later stage of foreland basin caused by collision between the North China plate and Qaidam microplate. The foreland basin triggered a intense earthquake, and formed seismites and earthquake-related soft-sediment deformation. The soft-sediment deformation structures of Devonian in the eastern North Qilian Mts. consist of seismo-cracks, sandstone dykes, syn-depositional faults, microfoids （micro-corrugated lamination）, fluidized veins, load casts, flame structures, pillow structures and brecciation. The seismo-cracks, syn-depositional faults and microfolds are cracks, faults and folds formed directly by oscillation of earthquake. The seismic dykes formed by sediment instilling into seismic cracks. Fluidized veins were made by instilling into the seismo-fissures of the fluidized sands. The load casts, flame structures and pillow structures were formed by sinking and instilling caused from oscillation of earthquake along the face between sandy and muddy beds. The brecciation resulted from the oscillation of earthquake and cracking of sedimentary layers. The seismites and soft-sediment deformations in Devonian triggered the earthquake related to tectonic activities during the orogeny and uplift of North Qilian Mts.
基金Supported by the National Natural Science Foundation of China(Nos.51274251,11502226)
文摘The sinkage of a moving tracked mining vehicle is greatly af fected by the combined compression-shear rheological properties of soft deep-sea sediments. For test purposes, the best sediment simulant is prepared based on soft deep-sea sediment from a C-C poly-metallic nodule mining area in the Pacific Ocean. Compressive creep tests and shear creep tests are combined to obtain compressive and shear rheological parameters to establish a combined compressive-shear rheological constitutive model and a compression-sinkage rheological constitutive model. The combined compression-shear rheological sinkage of the tracked mining vehicle at dif ferent speeds is calculated using the Recur Dyn software with a selfprogrammed subroutine to implement the combined compression-shear rheological constitutive model. The model results are compared with shear rheological sinkage and ordinary sinkage(without consideration of rheological properties). These results show that the combined compression-shear rheological constitutive model must be taken into account when calculating the sinkage of a tracked mining vehicle. The combined compression-shear rheological sinkage decrease with vehicle speed and is the largest among the three types of sinkage. The developed subroutine in the Recur Dyn software can be used to study the performance and structural optimization of moving tracked mining vehicles.
基金This paper was sponsored by the National Natural Science Foundation of China(grant No.40272049)Doctor Research Foundation of China University of Petroleum(Project No.Y020109).
文摘The authors introduced two kinds of newly found soft-sediment deformation-synsedimentary extension structure and syn-sedimentary compression structure, and discuss their origins and constraints on basin tectonic evolution. One representative of the syn-sedimentary extension structure is syn-sedimentary boudinage structure, while the typical example of the syn-sedimentary compression structure is compression sand pillows or compression wrinkles. The former shows NW-SE-trendlng contemporaneous extension events related to earthquakes in the rift basin near a famous Fe-Nb-REE deposit in northern China during the Early Paleozoic （or Mesoproterozoic as proposed by some researches）, while the latter indicates NE-SW-trending contemporaneous compression activities related to earthquakes in the Middle Triassic in the Nanpanjiang remnant basin covering south Guizhou, northwestern Guangxi and eastern Yunnan in southwestern China. The syn-sedimentary boudinage structure was found in an earthquake slump block in the lower part of the Early Paleozoic Sailinhudong Group, 20 km to the southeast of Bayan Obo, Inner Mongolia, north of China. The slump block is composed of two kinds of very thin layers-pale-gray micrite （microcrystalline limestone） of 1-2 cm thick interbedded with gray muddy micrite layers with the similar thickness. Almost every thin muddy micrite layer was cut into imbricate blocks or boudins by abundant tiny contemporaneous faults, while the interbedded micrite remain in continuity. Boudins form as a response to layer-parallel extension （and/or layer-perpendicular flattening） of stiff layers enveloped top and bottom by mechanically soft layers. In this case, the imbricate blocks cut by the tiny contemporaneous faults are the result of abrupt horizontal extension of the crust in the SE-NW direction accompanied with earthquakes. Thus, the rock block is, in fact, a kind of seismites. The syn-sedimentary boudins indicate that there was at least a strong earthquake belt on the southeast side of the basin during the early stage of the Sailinhudong Group. This may be a good constraint on the tectonic evolution of the Bayan Obo area during the Early Paleozoic time. The syn-sedimentary compression structure was found in the Middle Triassic flysch in the Nanpanjiang Basin. The typical structures are compression sand pillows and compression wrinkles. Both of them were found on the bottoms of sand units and the top surface of the underlying mud units. In other words, the structures were found only in the interfaces between the graded sand layer and the underlying mud layer of the flysch. A deformation experiment with dough was conducted, showing that the tectonic deformation must have been instantaneous one accompanied by earthquakes. The compression sand pillows or wrinkles showed uniform directions along the bottoms of the sand layer in the flysch, revealing contemporaneous horizontal compression during the time between deposition and diagenesis of the related beds. The Nanpanjiang Basin was affected, in general, with SSW-NNE compression during the Middle Triassic, according to the syn-sedimentary compression structure. The two kinds of syn-sedimentary tectonic deformation also indicate that the related basins belong to a rift basin and a remnant basin, respectively, in the model of Wilson Cycle.
基金supported by projects from the National Natural Science Foundation of China (41807298, 41702372, 41672211)the China Postdoctoral Science Foundation (2019M650788)+2 种基金National Key Research and Development Project of China (2016YFC0600310)the China Geological Survey (DD20160022, DD20190059)the Basic Research Funds (JYYWF201810) of the Institute of Geology, CAGS.
文摘With the objective of establishing a distinction between deformation structures caused by freeze/thaw cycles and those resulting from seismic activity, we studied three well–exposed alluvial deposits in a section at Dogai Coring, northern Qiangtang Basin, Tibetan Plateau. Deformation is present in the form of plastic structures(diapirs, folds and clastic dykes), brittle structures(micro–faults) and cryogenic wedges. These soft–sediment deformation features(except the micro–faults) are mainly characterized by meter–scale, non–interlayered, low–speed and low–pressure displacements within soft sediments, most commonly in the form of plastic deformation. Taking into account the geographic setting, lithology and deformation features, we interpret these soft–sediment deformation features as the products of freeze/thaw cycles, rather than of earthquake–induced shock waves, thus reflecting regional temperature changes and fluctuations of hydrothermal conditions in the uppermost sediments. The micro–faults(close to linear hot springs) are ascribed to regional fault activity;however, we were unable to identify the nature of the micro–faults, perhaps due to disturbance by subsequent freeze/thaw cycles. This study may serve as a guide to recognizing the differences between deformation structures attributed to freeze/thaw cycles and seismic processes.
基金granted by the doctor foundation of Henan Polytechnic University(NO:B2013-076)the National Nature Science Foundation of China(NO:4147208341440016)
文摘Soft-sediment deformation structures are abundant in the Cambrian Zhushadong and Mantou formations of the Dengfeng area, Henan Province, China. Soft-sediment deformation structures of the Zhushadong Formation consist of fluidized deformation, synsedimentary faults, seismo-folds and plastic deformation; the Mantou Formation is dominated by small-scale horst faults, intruded dikes, fluidized veins, and seismo-cracks. These structures are demonstrated to be earthquake-related by analysis of trigger mechanisms, and may indicate the activity of the Qinling tectonic belt during the early Cambrian. Furthermore, the assemblages of soft-sediment deformation structures altered with time： large-scale, intense deformation in the Zhushadong Formation alters to small-scale, weak deformation in the Mantou Formation. This striking feature may have been caused by changes in hypocentral depth from deep-focus to shallow-focus earthquakes, indicating that the Qinling tectonic belt developed from the subduction of the Shangdan Ocean to the extension of the Erlangping back-arc basin. This study suggests that soft-sediment deformation structures can be used to reveal the activity of a tectonic belt, and, more importantly, changes in deformation assemblages can track the evolution of a tectonic belt.
基金financially supported this research National Natural Science Foudation of China (No. 41172093)
文摘A particular type of soft-sediment deformation structure, similar to imbricate structure, is developed in the Jurassic strata at Honggouzi, western Qaidam Basin, China. We refer to this structure as a duplex-like deformation structure, because it is inferred to have been formed by the action of fast-moving, submarine gravity current sediments gliding across a pre-existing semiconsolidated sedimentary layer. The layers of duplex-like structure crop out in the southeastern limb of the core of a medium-sized anticline. The average dip direction of the duplex-like structure is 301.2° and the average dip angle is 54.7°. Duplex-like deformed laminations are composed mainly of weakly metamorphosed, extremely poorly sorted, feldspathic lithic graywacke. Sericite can be observed along bedding planes. The duplex-like structure occurs within a sequence of river-channel fine conglomerate, interchannel carbonaceous mudstone（shale）, shallow-water delta sand-shale, shallow-lake calcareous mudstone, olistostromes, and a turbidite. At the bottom of the sequence, we found brownish-red shallow-lake calcareous mudstone and carbonaceous mudstone and at the top olistostromes whose genesis is related to the slip and drag of a slumped body of submarine sediment. In combination with other symbiotic and associated structures, it is considered that the duplex-like structure was formed by the slumping and subsequent movement and traction of delta-front semiconsolidated sediments over the bottom sediments of a shore or shallow-lake sedimentary environment, probably triggered by an earthquake. The attitude of the duplex-like structure indicates that the direction of gliding was from NW301.2° toward SE121°, which is consistent with the current location of the Altun Mountains, indicating that the Altun Mountains existed in the Jurassic. The orogenesis of these mountains likely involved seismic activity, and an earthquake was the triggering factor in the formation of the duplex-like structure by causing the slumping/gliding of the olistostrome sediments.
文摘笔者对香山–天景山断裂带东南段——庙山断褶带–清水河盆地中部地区的软沉积变形构造进行系统分析,填补了该断裂东南段活动构造及古地震历史研究的空白,为区域地震危险性评价提供了新证据。通过对清水河盆地中部河湖相沉积及盆地边缘黄土沉积中软沉积变形构造的详细刻画和年代学约束,发现盆地中部广泛发育的软沉积变形构造主要包括假断层、滑塌构造、荷载构造、火焰状构造、变形层理、碎屑岩脉及张裂脉等,其形成时限约为11270±1100 a B.P.~7728±36 a B.P.。大多数变形构造多与假断层共生,形成具有定向特征的特定变形组合,并与盆地边缘黄土沉积中的张裂脉体层位相当,形成时代一致,呈现显著的地震触发特征,可能是对香山–天景山断裂带左旋走滑尾端效应的地表响应。研究揭示了庙山断褶带在全新世早期的显著地震活动,推测震中位于庙山断褶带中部地区,震级约为6.5≤M<7.3。本研究可为黄土覆盖区的活动构造研究、古地震历史重建及地震危险性评估提供重要的参考依据。
基金financially supported by the National Key Research and Development Program of China-Young Scientist Project(No.2024YFC2815400)the National Natural Science Foundation of China(No.52588202).
文摘Deep-sea mining has emerged as a critical solution to address global resource shortages;however,the mechanical interaction between tracked mining vehicles(TMVs)and soft seabed sediments presents fundamental engineering challenges.This study establishes a multiscale modelling framework coupling the discrete element method(DEM)with multi-body dynamics(MBD)to investigate track-seabed dynamic interactions across three operational modes:flat terrain,slope climbing,and ditch surmounting.The simulation framework,validated against laboratory experiments,systematically evaluates the influence of grouser geometry(involute,triangular,and pin-type)and traveling speed(0.2–1.0 m/s)on traction performance,slip rate,and ground pressure distribution.Results reveal rate-dependent traction mechanisms governed by soil microstructural responses:higher speeds enhance peak traction but exacerbate slip instability on complex terrain.Critical operational thresholds are established—0.7 m/s for flat terrain,≤0.5 m/s for slopes and ditches—with distinct grouser optimization strategies:involute grousers achieve 35%–40%slip reduction on slopes through progressive soil engagement,while triangular grousers provide optimal impact resistance during ditch crossing with 30%–35%performance improvement.These findings provide quantitative design criteria and operational guidelines for optimizing TMV structural parameters and control strategies,offering a robust theoretical foundation for enhancing the performance,safety,and reliability of deep-sea mining equipment in complex submarine environments.
