The study aimed to shed light on the post deformation and damage behavior of an extruded Mg-Zn-Zr alloy under a ballistic impact.The results revealed that the initial microstructure consisted of both{0001}basal and{10...The study aimed to shed light on the post deformation and damage behavior of an extruded Mg-Zn-Zr alloy under a ballistic impact.The results revealed that the initial microstructure consisted of both{0001}basal and{1010}prismatic fiber texture.After impact,adiabatic shear bands,pronounce different twinning in big grains,,<c>,and<c+a>types of dislocations,and grain refinement through twinning induce recrystallization accommodated the strain,and absorbed∼65.7%of the energy during impact carried by a soft steel projectile.Interestingly,the deformation behavior at the top broad sides of the crater was entirely different.The weak basal texture was changed to a strong prismatic texture,which was further proved by typical sigmoidal compressive stress-strain curves.A revised model for the development of the ultra-fine grains adjacent to the crater has been proposed.The microhardness and yield strength was∼33%and∼40%higher and chiefly ascribed to strain hardening in ultra-fine grained near the surface of the perforation path.The exit of the perforation path was severely damaged and forms onion-shaped concentric rings which were comprised of melted zones,dimples,and cracks.Based on the all interesting findings,this study can be a clue for the development of the lightweight Mg alloy for military and aerospace applications.展开更多
The core loss spectrum P(f) of Fe-B-Si amorphous soft magnetic alloy has been studied.It is found that P(f) has the fractal structure.The effect of heat treatment on the fractal dimension Df is discussed.
Amorphous powder cores based on spherical （Fe0.76Si0.09B0.1P0.05）99Nb1 amorphous powder and their SiO2 layer prepared by in situ coating insulation process were investigated in detAll. These cores were characterized...Amorphous powder cores based on spherical （Fe0.76Si0.09B0.1P0.05）99Nb1 amorphous powder and their SiO2 layer prepared by in situ coating insulation process were investigated in detAll. These cores were characterized by scanning electron microscopy and X-ray diffraction analyses, and the results revealed that the surface layer of the amorphous powder was composed of SiO2 with uniform surface coverage. The thickness of the SiO2 insulating layer could be controlled by adjusting the tetraethyl orthosilicate （TEOS） content. By cold-pressing with epoxy resin under a pressure of 1800 MPa, a ring powder core with an outer diameter of 20.3 ram, inner diameter of 12.7 mm, and height of 5.3 mm was prepared. The FeSiBPNb composite core showed its best properties when the TEOS content was 2 mL/g （the volume of TEOS for each gram of （Fe0.76Si0.09B0.1P0.05）99Nb1 amorphous powder, mL/g）, which showed good relative permeability in the high-frequency range of up to 10 MHz and a low core loss of 320 W/kg under the maximum magnetic flux density of 0.1 T and frequency of 100 kHz.展开更多
The dependences of the power loss per cycle on frequency have been investigated in the ranges of 100 Hz<= f<=25000 Hz and 0.1 T< =Bm <=1.0 T for three main original magnetic states in five sorts of Fe-base...The dependences of the power loss per cycle on frequency have been investigated in the ranges of 100 Hz<= f<=25000 Hz and 0.1 T< =Bm <=1.0 T for three main original magnetic states in five sorts of Fe-based nanocrystalline soft magnetic alloys. The measured and calculated results showed that the total power loss per cycle clearly exhibited a nonlinear behavior in the range below 3 kHz～5 kHz depending on both the magnetic state and the value of Dm, whereas it showed a quasi-linear behavior above this range. The total loss was decomposed into hysteresis loss, classical eddy current loss and excess loss, the obvious nonlinear behavior has been confirmed to be completely determined by the dependence of the excess loss on frequency. It has been indicated that the change rate of the excess loss per cycle with respect to frequency sharp decreases with increasing frequency in the range below about 3 kHz～5 kHz, wherease the rate of change slowly varies above this range, thus leading to the quasilinear behavior of the total loss per cycle. In this paper, some linear expressions of the total loss per cycle has been given in a wider medium-frequency segment, which can be used for roughly estimating the total loss.展开更多
This paper reviews some of our recent works on phase behaviors of particulate systems with a soft-core interaction potential. The potential is purely repulsive and bounded, i.e., it is finite even when two particles c...This paper reviews some of our recent works on phase behaviors of particulate systems with a soft-core interaction potential. The potential is purely repulsive and bounded, i.e., it is finite even when two particles completely overlap. The one-sided linear spring (harmonic) potential is one of the representatives. This model system has been successively employed to study the jamming transition, i.e., the formation of rigid and disordered packings of hard particles, and establish the jamming physics. This is actually based on the "hard" aspect of the potential, because at low densities and when particle overlap is tiny the potential resembles the hard sphere limit. At high densities, the potential exhibits its "soft" aspect: with the increase of density, there are successive reentrant crystallizations with many types of solid phases. Taking advantage of the dual nature of the potential, we investigate the criticality of the jamming transition from different perspectives, extend the jamming scenario to high densities, reveal the novel density evolution of two-dimensional melting, and find unexpected formation of quasicrystals. It is surprising that such a simple potential can exhibit so rich and unexpected phenomena in phase transitions. The phase behaviors discussed in this paper are also highly regarded in polymer science, which may thus shed light on our understanding of polymeric systems or inspire new ideas in studies of polymers.展开更多
Using ABAQUS FEM software,the Elastic-plastic with isotropic hardening model is applied to simulate 3D cylinder slab rolling forming in continuous casting (CC),the change of liquid core before slab solidification comp...Using ABAQUS FEM software,the Elastic-plastic with isotropic hardening model is applied to simulate 3D cylinder slab rolling forming in continuous casting (CC),the change of liquid core before slab solidification completely on soft re- duction process is studied,the analyse result shows the soft reduction technique can change the liquid core size,which is useful to cylinder slab forming in CC.展开更多
In order to check the traditional core loss formula, the core loss spectrum P(f) of Co-based amorphous soft magnetic alloy with constant permeability has been studied. It is found that within a high frequency range fr...In order to check the traditional core loss formula, the core loss spectrum P(f) of Co-based amorphous soft magnetic alloy with constant permeability has been studied. It is found that within a high frequency range from 10 kHz to 200 kHz and at Bm = 0. 1 T,the P(f) has the fractal structure P (f) = Po, and with the increasing of induced anisotropy energy Ku, the fractal dimension Dfrises, thus the total power loss at high frequency increases and the frequency characteristic of P(f) becomes worse.展开更多
In view of the development problems of village banks,through introducing the concept of private relationship lending,the functions of soft information,the channels of village banks for collecting soft information,and ...In view of the development problems of village banks,through introducing the concept of private relationship lending,the functions of soft information,the channels of village banks for collecting soft information,and the private relationship lending of village banks under Chinese rural human environment of highlighting relationship while despising rationality are proved.According to the recognition standard of core competitive edge,it can be concluded that the core competitive edge of village banks is private relationship lending.In the first place,these kinds of small and medium-sized quarter banks have competitive advantages in launching private relationship lending;in the second place,the lending businesses of village banks based on soft information attracts small and medium clients;in the third place,the private relationship lending has realized the scale economy.Furthermore,the reasons why village banks can not display the core competitive edge have been analyzed:firstly,village banks have not found that private relationship lending is their core competitive edge;secondly,the internal motivation on establishing private relationship lending of village banks is insufficient;thirdly,village banks have not prepared well in developing private relationship lending;The relevant policies and countermeasures are put forward,including transforming idea and vigorously developing private relationship lending;intensifying training and improving the quality of personnel involved;strengthening supervision and avoiding the violation behaviors of personnel involved;emulating experiences and perfecting the private relationship lending mechanism of village banks.展开更多
In many situations such as the cores of a rotating electrical machine and the T joints of a multiphase transformer, the local flux density varies with time in terms of both magnitude and direction, i.e. the flux densi...In many situations such as the cores of a rotating electrical machine and the T joints of a multiphase transformer, the local flux density varies with time in terms of both magnitude and direction, i.e. the flux density vector is rotating. Therefore, the magnetic properties of the core materials under the rotating flux density vector excitation should be properly measured, modeled and applied in the design and analysis of these electromagnetic devices. This paper presents an extensive review on the development of techniques and apparatus for measuring the rotational core losses of soft magnetic materials based on the experiences of various researchers in the last hundred years.展开更多
High-entropy alloys(HEAs),which are composed of 3d transition metals such as Fe,Co,and Ni,exhibit an exceptional combination of magnetic and other properties;however,the addition of non-ferromagnetic elements always n...High-entropy alloys(HEAs),which are composed of 3d transition metals such as Fe,Co,and Ni,exhibit an exceptional combination of magnetic and other properties;however,the addition of non-ferromagnetic elements always negatively affects the saturation magnetization strength(M s).Co_(4)Fe_(2)Al_(x)Mn_(y) alloys were designed and investigated in this study to develop a novel HEA with excellent soft magnetic properties.The Co_(4)Fe_(2)Al_(1.5)Mn_(1.5) HEA possesses the highest M s of 161.3 emu g^(-1) thus far reported for magnetic HEAs,a low coercivity of 1.9 Oe,a high electrical resistivity of 173μΩ cm,a superior thermal stability up to 600℃,which originates from the novel microstructure of B2 nanoparticles distributed in a DO_(3) matrix phase,and the crucial transition of Mn from antiferromagnetism to ferromagnetism with the assistance of Al.The Co_(4)Fe_(2_)Al_(1.5)Mn_(1.5) HEA was selected to produce micron-sized powder and soft magnetic powder cores(SMPCs)for application in the exploration field.The SMPCs exhibit a high stable effective perme-ability of 35.9 up to 1 MHz,low core loss of 38.1 mW cm^(-3)(@100 kHz,20 mT),and an excellent direct current(DC)bias performance of 87.7%at 100 Oe.This study paves the way for the development of soft magnetic HEAs with promising applications as magnetic functional materials.展开更多
The transformer core snubber （CS）, as one of the most important components in the EAST （experimental advanced superconducting tokamak） NBI （neutral beam injector） system, is designed to limit grid damage and pro...The transformer core snubber （CS）, as one of the most important components in the EAST （experimental advanced superconducting tokamak） NBI （neutral beam injector） system, is designed to limit grid damage and protect the ion source during periods of electrical breakdowns. A transformer core snubber is analyzed in detail in this paper. Several kinds of soft magnetic cores are presented and compared. With analysis and experiment on the basic characteristics of the cores, the most suitable materials are suggested. The circuit simulation code is established which could simulate faulty conditions with concentrated and distributed CS concepts. Based on the above work, an ion source CS is developed with series type of distributed topology. The CS has been subjected to experimental validation at 80 kV with a peak short-current of approximately 400 A in a real NBI system, which proves the accuracy of the adopted assumptions and the analysis method.展开更多
With the objective of establishing a distinction between deformation structures caused by freeze/thaw cycles and those resulting from seismic activity, we studied three well–exposed alluvial deposits in a section at ...With the objective of establishing a distinction between deformation structures caused by freeze/thaw cycles and those resulting from seismic activity, we studied three well–exposed alluvial deposits in a section at Dogai Coring, northern Qiangtang Basin, Tibetan Plateau. Deformation is present in the form of plastic structures(diapirs, folds and clastic dykes), brittle structures(micro–faults) and cryogenic wedges. These soft–sediment deformation features(except the micro–faults) are mainly characterized by meter–scale, non–interlayered, low–speed and low–pressure displacements within soft sediments, most commonly in the form of plastic deformation. Taking into account the geographic setting, lithology and deformation features, we interpret these soft–sediment deformation features as the products of freeze/thaw cycles, rather than of earthquake–induced shock waves, thus reflecting regional temperature changes and fluctuations of hydrothermal conditions in the uppermost sediments. The micro–faults(close to linear hot springs) are ascribed to regional fault activity;however, we were unable to identify the nature of the micro–faults, perhaps due to disturbance by subsequent freeze/thaw cycles. This study may serve as a guide to recognizing the differences between deformation structures attributed to freeze/thaw cycles and seismic processes.展开更多
基金This project was financially supported by the National Natural Science Foundation of China(No.51702015)。
文摘The study aimed to shed light on the post deformation and damage behavior of an extruded Mg-Zn-Zr alloy under a ballistic impact.The results revealed that the initial microstructure consisted of both{0001}basal and{1010}prismatic fiber texture.After impact,adiabatic shear bands,pronounce different twinning in big grains,,<c>,and<c+a>types of dislocations,and grain refinement through twinning induce recrystallization accommodated the strain,and absorbed∼65.7%of the energy during impact carried by a soft steel projectile.Interestingly,the deformation behavior at the top broad sides of the crater was entirely different.The weak basal texture was changed to a strong prismatic texture,which was further proved by typical sigmoidal compressive stress-strain curves.A revised model for the development of the ultra-fine grains adjacent to the crater has been proposed.The microhardness and yield strength was∼33%and∼40%higher and chiefly ascribed to strain hardening in ultra-fine grained near the surface of the perforation path.The exit of the perforation path was severely damaged and forms onion-shaped concentric rings which were comprised of melted zones,dimples,and cracks.Based on the all interesting findings,this study can be a clue for the development of the lightweight Mg alloy for military and aerospace applications.
文摘The core loss spectrum P(f) of Fe-B-Si amorphous soft magnetic alloy has been studied.It is found that P(f) has the fractal structure.The effect of heat treatment on the fractal dimension Df is discussed.
基金The work was with the support from the National Key Research and Development Program of China （Grant No. 2017YFB0903902）, National Natural Science Foundation of China （Grant Nos. 51601205, 51671035, 51071034, and 51671206）, and Ningbo Municipal Nature Science Foundation （Grant No. 2017A610036）.
文摘Amorphous powder cores based on spherical （Fe0.76Si0.09B0.1P0.05）99Nb1 amorphous powder and their SiO2 layer prepared by in situ coating insulation process were investigated in detAll. These cores were characterized by scanning electron microscopy and X-ray diffraction analyses, and the results revealed that the surface layer of the amorphous powder was composed of SiO2 with uniform surface coverage. The thickness of the SiO2 insulating layer could be controlled by adjusting the tetraethyl orthosilicate （TEOS） content. By cold-pressing with epoxy resin under a pressure of 1800 MPa, a ring powder core with an outer diameter of 20.3 ram, inner diameter of 12.7 mm, and height of 5.3 mm was prepared. The FeSiBPNb composite core showed its best properties when the TEOS content was 2 mL/g （the volume of TEOS for each gram of （Fe0.76Si0.09B0.1P0.05）99Nb1 amorphous powder, mL/g）, which showed good relative permeability in the high-frequency range of up to 10 MHz and a low core loss of 320 W/kg under the maximum magnetic flux density of 0.1 T and frequency of 100 kHz.
文摘The dependences of the power loss per cycle on frequency have been investigated in the ranges of 100 Hz<= f<=25000 Hz and 0.1 T< =Bm <=1.0 T for three main original magnetic states in five sorts of Fe-based nanocrystalline soft magnetic alloys. The measured and calculated results showed that the total power loss per cycle clearly exhibited a nonlinear behavior in the range below 3 kHz～5 kHz depending on both the magnetic state and the value of Dm, whereas it showed a quasi-linear behavior above this range. The total loss was decomposed into hysteresis loss, classical eddy current loss and excess loss, the obvious nonlinear behavior has been confirmed to be completely determined by the dependence of the excess loss on frequency. It has been indicated that the change rate of the excess loss per cycle with respect to frequency sharp decreases with increasing frequency in the range below about 3 kHz～5 kHz, wherease the rate of change slowly varies above this range, thus leading to the quasilinear behavior of the total loss per cycle. In this paper, some linear expressions of the total loss per cycle has been given in a wider medium-frequency segment, which can be used for roughly estimating the total loss.
基金the support from the National Natural Science Foundation of China (Nos. 11734014, 11574278, 21325418, 11074228, and 91027001)the National Basic Research Program of China (973 Program) (No. 2012CB821500)+1 种基金CAS 100Talent Program (No. 2030020004)Fundamental Research Funds for the Central Universities (Nos. 2340000034 and 2030020028)
文摘This paper reviews some of our recent works on phase behaviors of particulate systems with a soft-core interaction potential. The potential is purely repulsive and bounded, i.e., it is finite even when two particles completely overlap. The one-sided linear spring (harmonic) potential is one of the representatives. This model system has been successively employed to study the jamming transition, i.e., the formation of rigid and disordered packings of hard particles, and establish the jamming physics. This is actually based on the "hard" aspect of the potential, because at low densities and when particle overlap is tiny the potential resembles the hard sphere limit. At high densities, the potential exhibits its "soft" aspect: with the increase of density, there are successive reentrant crystallizations with many types of solid phases. Taking advantage of the dual nature of the potential, we investigate the criticality of the jamming transition from different perspectives, extend the jamming scenario to high densities, reveal the novel density evolution of two-dimensional melting, and find unexpected formation of quasicrystals. It is surprising that such a simple potential can exhibit so rich and unexpected phenomena in phase transitions. The phase behaviors discussed in this paper are also highly regarded in polymer science, which may thus shed light on our understanding of polymeric systems or inspire new ideas in studies of polymers.
基金Funded by Ph.D Researcher Foundation of Wuhan University of Technology(No.471-38300869),China.
文摘Using ABAQUS FEM software,the Elastic-plastic with isotropic hardening model is applied to simulate 3D cylinder slab rolling forming in continuous casting (CC),the change of liquid core before slab solidification completely on soft re- duction process is studied,the analyse result shows the soft reduction technique can change the liquid core size,which is useful to cylinder slab forming in CC.
文摘In order to check the traditional core loss formula, the core loss spectrum P(f) of Co-based amorphous soft magnetic alloy with constant permeability has been studied. It is found that within a high frequency range from 10 kHz to 200 kHz and at Bm = 0. 1 T,the P(f) has the fractal structure P (f) = Po, and with the increasing of induced anisotropy energy Ku, the fractal dimension Dfrises, thus the total power loss at high frequency increases and the frequency characteristic of P(f) becomes worse.
基金Supported by National Social Science Foundation(10BJY057)2010 Program of the Eleventh-Five Plan of the Development of Philosophy and Social Science in Guangzhou(10Y49)
文摘In view of the development problems of village banks,through introducing the concept of private relationship lending,the functions of soft information,the channels of village banks for collecting soft information,and the private relationship lending of village banks under Chinese rural human environment of highlighting relationship while despising rationality are proved.According to the recognition standard of core competitive edge,it can be concluded that the core competitive edge of village banks is private relationship lending.In the first place,these kinds of small and medium-sized quarter banks have competitive advantages in launching private relationship lending;in the second place,the lending businesses of village banks based on soft information attracts small and medium clients;in the third place,the private relationship lending has realized the scale economy.Furthermore,the reasons why village banks can not display the core competitive edge have been analyzed:firstly,village banks have not found that private relationship lending is their core competitive edge;secondly,the internal motivation on establishing private relationship lending of village banks is insufficient;thirdly,village banks have not prepared well in developing private relationship lending;The relevant policies and countermeasures are put forward,including transforming idea and vigorously developing private relationship lending;intensifying training and improving the quality of personnel involved;strengthening supervision and avoiding the violation behaviors of personnel involved;emulating experiences and perfecting the private relationship lending mechanism of village banks.
文摘In many situations such as the cores of a rotating electrical machine and the T joints of a multiphase transformer, the local flux density varies with time in terms of both magnitude and direction, i.e. the flux density vector is rotating. Therefore, the magnetic properties of the core materials under the rotating flux density vector excitation should be properly measured, modeled and applied in the design and analysis of these electromagnetic devices. This paper presents an extensive review on the development of techniques and apparatus for measuring the rotational core losses of soft magnetic materials based on the experiences of various researchers in the last hundred years.
基金supported by Youth Innovation Promotion Association CAS (Grant No.2021294)the S&T Innovation 2025 Major Special Program (Grant No.2021Z038)+1 种基金the 2022 Xinjiang Uygur Autonomous Region Postgraduate Innovation Research Program (Grand No.XJ2022G070)the Tianshan Innovation Team Program of Xinjiang Uygur Autonomous Region (Grand No.2020D14038).
文摘High-entropy alloys(HEAs),which are composed of 3d transition metals such as Fe,Co,and Ni,exhibit an exceptional combination of magnetic and other properties;however,the addition of non-ferromagnetic elements always negatively affects the saturation magnetization strength(M s).Co_(4)Fe_(2)Al_(x)Mn_(y) alloys were designed and investigated in this study to develop a novel HEA with excellent soft magnetic properties.The Co_(4)Fe_(2)Al_(1.5)Mn_(1.5) HEA possesses the highest M s of 161.3 emu g^(-1) thus far reported for magnetic HEAs,a low coercivity of 1.9 Oe,a high electrical resistivity of 173μΩ cm,a superior thermal stability up to 600℃,which originates from the novel microstructure of B2 nanoparticles distributed in a DO_(3) matrix phase,and the crucial transition of Mn from antiferromagnetism to ferromagnetism with the assistance of Al.The Co_(4)Fe_(2_)Al_(1.5)Mn_(1.5) HEA was selected to produce micron-sized powder and soft magnetic powder cores(SMPCs)for application in the exploration field.The SMPCs exhibit a high stable effective perme-ability of 35.9 up to 1 MHz,low core loss of 38.1 mW cm^(-3)(@100 kHz,20 mT),and an excellent direct current(DC)bias performance of 87.7%at 100 Oe.This study paves the way for the development of soft magnetic HEAs with promising applications as magnetic functional materials.
基金supported by National Magnetic Confinement Fusion Science Program of China (Nos.2010GB108003, 2011GB113005-1)in part by the National Magnetic Confinement Fusion Science Program of China (No.2010GB108003)+1 种基金the State Basic Research Development Program of China (973 Program 2011GB113005-1)the Large Scientific Project of EAST Auxiliary Heating Upgrade
文摘The transformer core snubber （CS）, as one of the most important components in the EAST （experimental advanced superconducting tokamak） NBI （neutral beam injector） system, is designed to limit grid damage and protect the ion source during periods of electrical breakdowns. A transformer core snubber is analyzed in detail in this paper. Several kinds of soft magnetic cores are presented and compared. With analysis and experiment on the basic characteristics of the cores, the most suitable materials are suggested. The circuit simulation code is established which could simulate faulty conditions with concentrated and distributed CS concepts. Based on the above work, an ion source CS is developed with series type of distributed topology. The CS has been subjected to experimental validation at 80 kV with a peak short-current of approximately 400 A in a real NBI system, which proves the accuracy of the adopted assumptions and the analysis method.
基金supported by projects from the National Natural Science Foundation of China (41807298, 41702372, 41672211)the China Postdoctoral Science Foundation (2019M650788)+2 种基金National Key Research and Development Project of China (2016YFC0600310)the China Geological Survey (DD20160022, DD20190059)the Basic Research Funds (JYYWF201810) of the Institute of Geology, CAGS.
文摘With the objective of establishing a distinction between deformation structures caused by freeze/thaw cycles and those resulting from seismic activity, we studied three well–exposed alluvial deposits in a section at Dogai Coring, northern Qiangtang Basin, Tibetan Plateau. Deformation is present in the form of plastic structures(diapirs, folds and clastic dykes), brittle structures(micro–faults) and cryogenic wedges. These soft–sediment deformation features(except the micro–faults) are mainly characterized by meter–scale, non–interlayered, low–speed and low–pressure displacements within soft sediments, most commonly in the form of plastic deformation. Taking into account the geographic setting, lithology and deformation features, we interpret these soft–sediment deformation features as the products of freeze/thaw cycles, rather than of earthquake–induced shock waves, thus reflecting regional temperature changes and fluctuations of hydrothermal conditions in the uppermost sediments. The micro–faults(close to linear hot springs) are ascribed to regional fault activity;however, we were unable to identify the nature of the micro–faults, perhaps due to disturbance by subsequent freeze/thaw cycles. This study may serve as a guide to recognizing the differences between deformation structures attributed to freeze/thaw cycles and seismic processes.
