Although extensively studied, the exact role of sleep in learning and memory is still not very clear. Sleep deprivation has been most frequently used to explore the effects of sleep on learning and memory, but the res...Although extensively studied, the exact role of sleep in learning and memory is still not very clear. Sleep deprivation has been most frequently used to explore the effects of sleep on learning and memory, but the results from such studies are inevitably complicated by concurrent stress and distress. Furthermore, it is not clear whether there is a strict time-window between sleep and memory consolidation. In the present study we were able to induce time-locked slow-wave sleep(SWS) in mice by optogenetically stimulating GABAergic neurons in the parafacial zone(PZ), providing a direct approach to analyze the influences of SWS on learning and memory with precise time-windows. We found that SWS induced by light for 30 min immediately or 15 min after the training phase of the object-in-place task significantly prolonged the memory from 30 min to 6 h. However, induction of SWS 30 min after the training phase did not improve memory, suggesting a critical time-window between the induction of a brief episode of SWS and learning for memory consolidation.Application of a gentle touch to the mice during light stimulation to prevent SWS induction also failed to improve memory, indicating the specific role of SWS,but not the activation of PZ GABAergic neurons itself, in memory consolidation. Similar influences of light-induced SWS on memory consolidation also occurred for Y-maze spatial memory and contextual fear memory, but not for cued fear memory. SWS induction immediately before the test phase had no effect on memory performance, indicating that SWS does not affect memory retrieval. Thus, by induction of a brief-episode SWS we have revealed a critical time window for the consolidation of hippocampusdependent memory.展开更多
A backward wave amplifier（BWA） in a terahertz regime with a novel slow-wave structure（SWS） composed of multi parallel grating pins inside a rectangular waveguide is analyzed. The multi-pin rectangular waveguide SW...A backward wave amplifier（BWA） in a terahertz regime with a novel slow-wave structure（SWS） composed of multi parallel grating pins inside a rectangular waveguide is analyzed. The multi-pin rectangular waveguide SWS possesses good performance and is compatible with micro-fabrication technologies. The dispersion and interaction impedance of the multipin SWS are presented. The stopbands of the modes cling together in a Brillouim zone. The SWS has a high interaction impedance that is suitable for the interaction of multi cylindrical beams. The design, which is based on three parallel pins supporting the wave–beam interaction with four cylindrical beams, is verified by three-dimensional particle-in-cell simulations. A BWA with the central frequency at 340 GHz is demonstrated, and the output power is more than 100 mW.A tuning frequency range of 15 GHz（333–348 GHz） is obtained with a gain of more than 20 dB.展开更多
A novel slotted helix slow-wave structure （SWS） is proposed to develop a high power, wide-bandwidth, and high reliability millimeter-wave traveling-wave tube （TWT）. This novel structure, which has higher heat capa...A novel slotted helix slow-wave structure （SWS） is proposed to develop a high power, wide-bandwidth, and high reliability millimeter-wave traveling-wave tube （TWT）. This novel structure, which has higher heat capacity than a conven- tional helix SWS, evolves from conventional helix SWS with three parallel rows of rectangular slots made in the outside of the helix tape. In this paper, the electromagnetic characteristics and the beam-wave interaction of this novel structure operating in the Ka-band are investigated. From our calculations, when the designed beam voltage and beam current are set to be 18.45 kV and 0.2 A, respectively, this novel circuit can produce over 700-W average output power in a frequency range from 27.5 GHz to 32.5 GHz, and the corresponding conversion efficiency values vary from 19% to 21.3%, and the maximum output power is 787 W at 30 GHz.展开更多
The folded double-ridged waveguide structure is presented and its properties used for wide-band traveling-wave tube are investigated. Expressions of dispersion characteristics, normalized phase velocity and interactio...The folded double-ridged waveguide structure is presented and its properties used for wide-band traveling-wave tube are investigated. Expressions of dispersion characteristics, normalized phase velocity and interaction impedance of this structure are derived and numerically calculated. The calculated results using our theory agree well with those obtained by using the 3D electromagnetic simulation software HFSS. Influences of the ridge-loaded area and broad-wall dimensions on the high frequency characteristics of the novel slow-wave structure are discussed. It is shown that the folded double-ridged waveguide structure has a much wider relative passband than the folded waveguide slow-wave structure and a relative passband of 67% could be obtained, indicating that this structure can operate in broad-band frequency ranges of beam-wave interaction. The small signal gain property is investigated for ensuring the improvement of bandwidth. Meanwhile, with comparable dispersion characteristics, the transverse section dimension of this novel structure is much smaller than that of conventional one, which indicates an available way to reduce the weight of traveling-wave tube.展开更多
A watt-class backward wave oscillator is proposed, using the concise sine waveguide slow-wave structure combined with a pencil electron beam to operate at 220 GHz. Firstly, the dispersion curve of the sine waveguide i...A watt-class backward wave oscillator is proposed, using the concise sine waveguide slow-wave structure combined with a pencil electron beam to operate at 220 GHz. Firstly, the dispersion curve of the sine waveguide is calculated, then, the oscillation frequency and operating voltage of the device are predicted and the circuit transmission loss is calculated. Finally, the particle-in-cell simulation method is used to forecast its radiation performance. The results show that this novel backward wave oscillator can produce over 1-W continuous wave power output in a frequency range from 210 GHz to 230 GHz. Therefore, it will be considered as a very promising high-power millimeter-wave to terahertz-wave radiation source.展开更多
A method of designing a photonic crystal grating slow-wave circuit in which the cylinders of the 2D photonic crystals dot on a cross-sectional plane is established by calculating the band structures of the 2D photonic...A method of designing a photonic crystal grating slow-wave circuit in which the cylinders of the 2D photonic crystals dot on a cross-sectional plane is established by calculating the band structures of the 2D photonic crystals, and the eigenfrequency of the equivalent waveguide grating. For calculating the band structures, the eigenvalue equations of the photonic crystals in the system of photonie crystal grating slow-wave circuit are derived in a special polarization mode. Two examples are taken to show the method. The design result is validated by the scattering parameters of the same circuit. The result indicates that there exists no photonic band gap if the metal gratings do not extend into the photonic crystals; the design of the circuit without the metal gratings extending into the photonie crystals is less flexible than that with the metal gratings extending into the photonic crystals.展开更多
The variational method is applied to calculate the dispersion characteristics of disc-loaded waveguide slow-wave structures. The parameters describing the waveguide discontinuities in disc-loaded waveguide are calcula...The variational method is applied to calculate the dispersion characteristics of disc-loaded waveguide slow-wave structures. The parameters describing the waveguide discontinuities in disc-loaded waveguide are calculated by the variational method. Then the dispersion characteristics of slow-wave structures are obtained using lossless microwave quadrupole theory. Good agreement was observed between results of the Variational method and those of field matching method and high frequency structure simulator. In the case of broad band, results of the variational method are better than those of field matching method.展开更多
This paper is focused on the automated synthesis of wideband bandpass filters operating at microwave frequencies and based on electromagnetic bandgap(EBG)structures.The classical counterpart of such filter consists of...This paper is focused on the automated synthesis of wideband bandpass filters operating at microwave frequencies and based on electromagnetic bandgap(EBG)structures.The classical counterpart of such filter consists of a combination of transmission line sections and shunt-connected grounded stubs placed at equidistant positions.By replacing the transmission line sections with capacitively-loaded lines(a kind of EBG-based lines)exhibiting the same phase shift at the lower cutoff frequency and the same characteristic(actually Bloch)impedance,filter size is reduced and the spurious pass bands can be efficiently suppressed.In practice,the loading capacitances are implemented by means of patches,in order to achieve a fully planar filter implementation.The presence of the patches reduces the effective phase velocity of the capacitively-loaded lines,thus providing a slow-wave effect useful for filter miniaturization.Moreover,due to periodicity,such EBG-based lines exhibit wide stop bands,which are used for spurious suppression.Even though such EBGbased filters were previously reported by some of the authors,a systematic synthesis method was not applied for filter design.In this paper,the main aim is to demonstrate the potential of aggressive space mapping(ASM)for that purpose,and it will be shown that such filters can be automatically synthesized.展开更多
This paper proposes a new metamaterial design that can achieve electromagnetic induction transparency-like (EIT-like) effects in the microwave band. The unit structure of metamaterials consists of square rings and met...This paper proposes a new metamaterial design that can achieve electromagnetic induction transparency-like (EIT-like) effects in the microwave band. The unit structure of metamaterials consists of square rings and metal wires. The square ring acts as the “bright state” and the metal wire acts as the “dark state”. The destructive interference between the bright state and the dark state produces an EIT-like effect. In the simulation results, a transparent window centered at 4.00 GHz can be observed in the transmission spectrum. By studying the phase change of the transparent window, it is found that the group delay of the metamaterial structure can reach 0.39 ns at 4.00 GHz. This paper </span><span>also studies the influence of the refractive index of the medium on the</span><span> EIT-like effect. Numerical simulations show that such metamaterial is very sensitive to the refractive index of the medium, and the sensitivity is 15 mm/RIU. Our design can be extended to other frequency bands and may have potential applications in filtering, sensing, slow-light devices, and nonlinear optics.展开更多
Based on the actual vane-loaded tape helix slow wave structure, a new theoretical analytic model for calculating coupling impedance is proposed by Chen Qingyou, et al.(1999)with calculated values of dispersion in good...Based on the actual vane-loaded tape helix slow wave structure, a new theoretical analytic model for calculating coupling impedance is proposed by Chen Qingyou, et al.(1999)with calculated values of dispersion in good agreement with measured ones. In this paper, it is continued to use this model to calculate the coupling impedance of such a structure, and analyze the effects of the propagation power within vane gaps and the helix gap on the coupling impedance.As a result, the theoretical values are found to be in good agreement with the measured ones,with the maximum difference less than ±18%.展开更多
<div style="text-align:justify;"> A high-efficiency ridged magnetically insulated transmission line oscillator (RMILO) is proposed and investigated theoretically and numerically in this paper. In the R...<div style="text-align:justify;"> A high-efficiency ridged magnetically insulated transmission line oscillator (RMILO) is proposed and investigated theoretically and numerically in this paper. In the RMILO, ridge-disk vanes are introduced to enhance the power efficiency. Theoretical investigation shows that the ridge-disk can enhance the coupling impedance of the slow-wave structure (SWS), and so enhance the power efficiency. Moreover, the ridge has a weak influence on frequency, so, it influences little on the tunability of the MILO. In simulation, when the applied voltage is increased to 807 kV, the RMILO can get the 3 dB tunable frequency range with 7.6 - 13.9 GHz and the 3 dB tuning bandwidth with 58.6% which has an increase of 27.6% compared with the conventional MILO. So, the tuning performance of the RMILO is more superior. Besides, the RMILO gets the maximum output power of 7.1 GW, the corresponding power efficiency is 22.6% and the frequency is 1.400 GHz. Furthermore, when the applied voltage is increased to 807 kV, high-power microwave with a power of 13.5 GW, frequency of 1.400 GHz, and ef?ciency of 24.5% is generated, which has an increase of 20.2% compared with the conventional MILO. The simulation results con?rm the ones predicted by theoretical analysis. </div>展开更多
The reflection and transmission problem of an electromagnetic slow-wave by a uniformly moving dielectric slab was investigated theoretically.The relationships among the field vectors of the incident,reflected and tran...The reflection and transmission problem of an electromagnetic slow-wave by a uniformly moving dielectric slab was investigated theoretically.The relationships among the field vectors of the incident,reflected and transmitted waves,and the reflection and transmission coefficients were derived based on the electromagnetic theory and the principle of special relativity.The numerical analysis shows that at a small mechanical velocity the reflection coefficient of the electromagnetic slow-wave can be close to unit by choosing an appropriate period and mode-order;this is obviously different from that of a fast wave.The results are significant for research on electromagnetics and electrodynamics,and may have applicability to other fields.展开更多
[Background]Traveling-wave tubes(TWTs)are widely applied in radar,imaging,and military systems owing to their excellent amplification characteristics.Miniaturization and integration are critical to the future of TWTs,...[Background]Traveling-wave tubes(TWTs)are widely applied in radar,imaging,and military systems owing to their excellent amplification characteristics.Miniaturization and integration are critical to the future of TWTs,with multi-channel slow-wave structures(SWSs)forming the foundation for their realization in high-power vacuum electronic devices.[Purpose]To provide design insights for multi-channel TWTs and simultaneously enhance their output power,a W-band folded-waveguide TWT with dual electron beams and H-plane power combining was proposed.[Methods]Three-dimensional electromagnetic simulations in CST were conducted to verify the highfrequency characteristics,electric field distribution,and amplification performance of the proposed SWS,thereby confirming the validity of the design.[Results]Results indicate that the designed TWT achieves a transmission bandwidth of 10 GHz.With an electron beam voltage of 17.9 kV and a current of 0.35 A,the output power reaches 450 W at 94 GHz,corresponding to an efficiency of 7.18%and a gain of 23.5 dB.Moreover,under fixed beam voltage and current,the TWT delivers over 200 W output power across 91–99 GHz,with a 3 dB bandwidth of 91–98.5 GHz.The particle voltage distribution after modulation further validates the mode analysis.[Conclusions]These results demonstrate the feasibility of compact dual-beam power-combining structures and provide useful guidance for the design of future multi-channel TWTs.展开更多
基金supported by grants from the National Natural Science Foundation of China (31771167 and 31571090)the National Basic Research Development Program of China (2016YFC1306700)+1 种基金the Non-profit Central Research Institute Fund of the Chinese Academy of Medical Sciences (2018PT31041)the Fundamental Research Funds for the Central Universities of China (2017FZA7003)
文摘Although extensively studied, the exact role of sleep in learning and memory is still not very clear. Sleep deprivation has been most frequently used to explore the effects of sleep on learning and memory, but the results from such studies are inevitably complicated by concurrent stress and distress. Furthermore, it is not clear whether there is a strict time-window between sleep and memory consolidation. In the present study we were able to induce time-locked slow-wave sleep(SWS) in mice by optogenetically stimulating GABAergic neurons in the parafacial zone(PZ), providing a direct approach to analyze the influences of SWS on learning and memory with precise time-windows. We found that SWS induced by light for 30 min immediately or 15 min after the training phase of the object-in-place task significantly prolonged the memory from 30 min to 6 h. However, induction of SWS 30 min after the training phase did not improve memory, suggesting a critical time-window between the induction of a brief episode of SWS and learning for memory consolidation.Application of a gentle touch to the mice during light stimulation to prevent SWS induction also failed to improve memory, indicating the specific role of SWS,but not the activation of PZ GABAergic neurons itself, in memory consolidation. Similar influences of light-induced SWS on memory consolidation also occurred for Y-maze spatial memory and contextual fear memory, but not for cued fear memory. SWS induction immediately before the test phase had no effect on memory performance, indicating that SWS does not affect memory retrieval. Thus, by induction of a brief-episode SWS we have revealed a critical time window for the consolidation of hippocampusdependent memory.
基金Project supported by the National Basic Research Program of China(Grant No.2014CB339801)the National High Technology Research and Development Program of China(Grant No.G060104012AA8122007B)
文摘A backward wave amplifier（BWA） in a terahertz regime with a novel slow-wave structure（SWS） composed of multi parallel grating pins inside a rectangular waveguide is analyzed. The multi-pin rectangular waveguide SWS possesses good performance and is compatible with micro-fabrication technologies. The dispersion and interaction impedance of the multipin SWS are presented. The stopbands of the modes cling together in a Brillouim zone. The SWS has a high interaction impedance that is suitable for the interaction of multi cylindrical beams. The design, which is based on three parallel pins supporting the wave–beam interaction with four cylindrical beams, is verified by three-dimensional particle-in-cell simulations. A BWA with the central frequency at 340 GHz is demonstrated, and the output power is more than 100 mW.A tuning frequency range of 15 GHz（333–348 GHz） is obtained with a gain of more than 20 dB.
基金Project supported by the National Natural Science Foundation of China(Grant No.61271029)the Natural Science Key Laboratory Foundationthe Natural Science Fund for Distinguished Young Scholars of China(Grant No.61125103)
文摘A novel slotted helix slow-wave structure （SWS） is proposed to develop a high power, wide-bandwidth, and high reliability millimeter-wave traveling-wave tube （TWT）. This novel structure, which has higher heat capacity than a conven- tional helix SWS, evolves from conventional helix SWS with three parallel rows of rectangular slots made in the outside of the helix tape. In this paper, the electromagnetic characteristics and the beam-wave interaction of this novel structure operating in the Ka-band are investigated. From our calculations, when the designed beam voltage and beam current are set to be 18.45 kV and 0.2 A, respectively, this novel circuit can produce over 700-W average output power in a frequency range from 27.5 GHz to 32.5 GHz, and the corresponding conversion efficiency values vary from 19% to 21.3%, and the maximum output power is 787 W at 30 GHz.
基金Project supported in part by the National Natural Science Foundation of China (Grant No. 60971038)in part by the Fundamental Research Funds for Central Universities,China (Grant No. ZYGX2009Z003)
文摘The folded double-ridged waveguide structure is presented and its properties used for wide-band traveling-wave tube are investigated. Expressions of dispersion characteristics, normalized phase velocity and interaction impedance of this structure are derived and numerically calculated. The calculated results using our theory agree well with those obtained by using the 3D electromagnetic simulation software HFSS. Influences of the ridge-loaded area and broad-wall dimensions on the high frequency characteristics of the novel slow-wave structure are discussed. It is shown that the folded double-ridged waveguide structure has a much wider relative passband than the folded waveguide slow-wave structure and a relative passband of 67% could be obtained, indicating that this structure can operate in broad-band frequency ranges of beam-wave interaction. The small signal gain property is investigated for ensuring the improvement of bandwidth. Meanwhile, with comparable dispersion characteristics, the transverse section dimension of this novel structure is much smaller than that of conventional one, which indicates an available way to reduce the weight of traveling-wave tube.
基金Project supported by the National Natural Science Foundation for Distinguished Young Scholars of China (Grant No. 61125103)the National Natural Science Foundation of China (Grant Nos. 60971038 and 60971031)the Fundamental Research Funds for the Central Universities,China (Grant No. ZYGX2009Z003)
文摘A watt-class backward wave oscillator is proposed, using the concise sine waveguide slow-wave structure combined with a pencil electron beam to operate at 220 GHz. Firstly, the dispersion curve of the sine waveguide is calculated, then, the oscillation frequency and operating voltage of the device are predicted and the circuit transmission loss is calculated. Finally, the particle-in-cell simulation method is used to forecast its radiation performance. The results show that this novel backward wave oscillator can produce over 1-W continuous wave power output in a frequency range from 210 GHz to 230 GHz. Therefore, it will be considered as a very promising high-power millimeter-wave to terahertz-wave radiation source.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 60532010 and 60601005）.
文摘A method of designing a photonic crystal grating slow-wave circuit in which the cylinders of the 2D photonic crystals dot on a cross-sectional plane is established by calculating the band structures of the 2D photonic crystals, and the eigenfrequency of the equivalent waveguide grating. For calculating the band structures, the eigenvalue equations of the photonic crystals in the system of photonie crystal grating slow-wave circuit are derived in a special polarization mode. Two examples are taken to show the method. The design result is validated by the scattering parameters of the same circuit. The result indicates that there exists no photonic band gap if the metal gratings do not extend into the photonic crystals; the design of the circuit without the metal gratings extending into the photonie crystals is less flexible than that with the metal gratings extending into the photonic crystals.
文摘The variational method is applied to calculate the dispersion characteristics of disc-loaded waveguide slow-wave structures. The parameters describing the waveguide discontinuities in disc-loaded waveguide are calculated by the variational method. Then the dispersion characteristics of slow-wave structures are obtained using lossless microwave quadrupole theory. Good agreement was observed between results of the Variational method and those of field matching method and high frequency structure simulator. In the case of broad band, results of the variational method are better than those of field matching method.
文摘This paper is focused on the automated synthesis of wideband bandpass filters operating at microwave frequencies and based on electromagnetic bandgap(EBG)structures.The classical counterpart of such filter consists of a combination of transmission line sections and shunt-connected grounded stubs placed at equidistant positions.By replacing the transmission line sections with capacitively-loaded lines(a kind of EBG-based lines)exhibiting the same phase shift at the lower cutoff frequency and the same characteristic(actually Bloch)impedance,filter size is reduced and the spurious pass bands can be efficiently suppressed.In practice,the loading capacitances are implemented by means of patches,in order to achieve a fully planar filter implementation.The presence of the patches reduces the effective phase velocity of the capacitively-loaded lines,thus providing a slow-wave effect useful for filter miniaturization.Moreover,due to periodicity,such EBG-based lines exhibit wide stop bands,which are used for spurious suppression.Even though such EBGbased filters were previously reported by some of the authors,a systematic synthesis method was not applied for filter design.In this paper,the main aim is to demonstrate the potential of aggressive space mapping(ASM)for that purpose,and it will be shown that such filters can be automatically synthesized.
文摘This paper proposes a new metamaterial design that can achieve electromagnetic induction transparency-like (EIT-like) effects in the microwave band. The unit structure of metamaterials consists of square rings and metal wires. The square ring acts as the “bright state” and the metal wire acts as the “dark state”. The destructive interference between the bright state and the dark state produces an EIT-like effect. In the simulation results, a transparent window centered at 4.00 GHz can be observed in the transmission spectrum. By studying the phase change of the transparent window, it is found that the group delay of the metamaterial structure can reach 0.39 ns at 4.00 GHz. This paper </span><span>also studies the influence of the refractive index of the medium on the</span><span> EIT-like effect. Numerical simulations show that such metamaterial is very sensitive to the refractive index of the medium, and the sensitivity is 15 mm/RIU. Our design can be extended to other frequency bands and may have potential applications in filtering, sensing, slow-light devices, and nonlinear optics.
基金Supported by the National Natural Science Foundation of China under grant no.69901004
文摘Based on the actual vane-loaded tape helix slow wave structure, a new theoretical analytic model for calculating coupling impedance is proposed by Chen Qingyou, et al.(1999)with calculated values of dispersion in good agreement with measured ones. In this paper, it is continued to use this model to calculate the coupling impedance of such a structure, and analyze the effects of the propagation power within vane gaps and the helix gap on the coupling impedance.As a result, the theoretical values are found to be in good agreement with the measured ones,with the maximum difference less than ±18%.
文摘<div style="text-align:justify;"> A high-efficiency ridged magnetically insulated transmission line oscillator (RMILO) is proposed and investigated theoretically and numerically in this paper. In the RMILO, ridge-disk vanes are introduced to enhance the power efficiency. Theoretical investigation shows that the ridge-disk can enhance the coupling impedance of the slow-wave structure (SWS), and so enhance the power efficiency. Moreover, the ridge has a weak influence on frequency, so, it influences little on the tunability of the MILO. In simulation, when the applied voltage is increased to 807 kV, the RMILO can get the 3 dB tunable frequency range with 7.6 - 13.9 GHz and the 3 dB tuning bandwidth with 58.6% which has an increase of 27.6% compared with the conventional MILO. So, the tuning performance of the RMILO is more superior. Besides, the RMILO gets the maximum output power of 7.1 GW, the corresponding power efficiency is 22.6% and the frequency is 1.400 GHz. Furthermore, when the applied voltage is increased to 807 kV, high-power microwave with a power of 13.5 GW, frequency of 1.400 GHz, and ef?ciency of 24.5% is generated, which has an increase of 20.2% compared with the conventional MILO. The simulation results con?rm the ones predicted by theoretical analysis. </div>
基金supported by the National Natural Science Foundation of China(60171014,50577029,and50777023)
文摘The reflection and transmission problem of an electromagnetic slow-wave by a uniformly moving dielectric slab was investigated theoretically.The relationships among the field vectors of the incident,reflected and transmitted waves,and the reflection and transmission coefficients were derived based on the electromagnetic theory and the principle of special relativity.The numerical analysis shows that at a small mechanical velocity the reflection coefficient of the electromagnetic slow-wave can be close to unit by choosing an appropriate period and mode-order;this is obviously different from that of a fast wave.The results are significant for research on electromagnetics and electrodynamics,and may have applicability to other fields.
基金National Key Research and Development Program of China(2022YFF0707602)National Natural Science Foundation of China(62471097,62471115,62471101)National Natural Science Foundation of Sichuan(2025ZNSFSC0537)。
文摘[Background]Traveling-wave tubes(TWTs)are widely applied in radar,imaging,and military systems owing to their excellent amplification characteristics.Miniaturization and integration are critical to the future of TWTs,with multi-channel slow-wave structures(SWSs)forming the foundation for their realization in high-power vacuum electronic devices.[Purpose]To provide design insights for multi-channel TWTs and simultaneously enhance their output power,a W-band folded-waveguide TWT with dual electron beams and H-plane power combining was proposed.[Methods]Three-dimensional electromagnetic simulations in CST were conducted to verify the highfrequency characteristics,electric field distribution,and amplification performance of the proposed SWS,thereby confirming the validity of the design.[Results]Results indicate that the designed TWT achieves a transmission bandwidth of 10 GHz.With an electron beam voltage of 17.9 kV and a current of 0.35 A,the output power reaches 450 W at 94 GHz,corresponding to an efficiency of 7.18%and a gain of 23.5 dB.Moreover,under fixed beam voltage and current,the TWT delivers over 200 W output power across 91–99 GHz,with a 3 dB bandwidth of 91–98.5 GHz.The particle voltage distribution after modulation further validates the mode analysis.[Conclusions]These results demonstrate the feasibility of compact dual-beam power-combining structures and provide useful guidance for the design of future multi-channel TWTs.
