A novel slotted optical microdisk resonator, which significantly enhances light–matter interaction and provides a promising approach for increasing the sensitivity of sensors, is theoretically and numerically investi...A novel slotted optical microdisk resonator, which significantly enhances light–matter interaction and provides a promising approach for increasing the sensitivity of sensors, is theoretically and numerically investigated. In this slotted resonator, the mode splitting is generated due to reflection of the slot. Remarkably, effects of the slot width and angular position on the mode splitting are mainly studied. The results reveal that the mode splitting is a second function of the slot width, and the maximum mode splitting induced by the slot deformation is achieved with 2.7853 × 10~9Hz∕nm. Therefore, the slotted resonator is an excellent candidate for pressure and force sensing. Besides, the influence of the slot angular position on the mode splitting is a cosine curve with the highest sensitivity of 1.23 × 10^(11)Hz∕deg; thus, the optical characteristic demonstrates that the slotted resonator can be used for inertial measurements.展开更多
The detent force of a permanent magnet linear synchronous motor （PMLSM） is analyzed and the corresponding optimization methods are presented to reduce it. The detent force, which is divided into two components, i.e....The detent force of a permanent magnet linear synchronous motor （PMLSM） is analyzed and the corresponding optimization methods are presented to reduce it. The detent force, which is divided into two components, i.e. resulting from the end effect and resulting from the slotting effect, can be analyzed respectively by the finite element method （FEM）. To reduce the detent force arising from the end effect, several optimal design techniques are utilized, namely, adopting the suitable length and end shape of the primary armature. The detent force resulting from the slotting effect is reduced by means of skewing and adjusting the width of the magnets mounted on the secondary armature, and adopting the fractional slots of the primary armature. The validity of the analytical detent force predictions and the effectiveness of the detent force reduction techniques are verified by the experimental measurements.展开更多
Because the mover and stator of a doubly-fed linear motor are both equipped with three-phase windings, the motor enables contactless energy to be transferred from the stator to the mover. Thus, when a doubly-fed linea...Because the mover and stator of a doubly-fed linear motor are both equipped with three-phase windings, the motor enables contactless energy to be transferred from the stator to the mover. Thus, when a doubly-fed linear motor is used in the linear driving system of trains, neither an overhead line nor a third rail is needed. However, the doubly- fed motor will lead to more severe thrust fluctuation than the unilateral motors. In order to overcome this shortcoming, the thrust fluctuation of the doubly-fed motor should be analyzed. In this paper, an expression for motor thrust is derived. It points out that the slot effect caused by the slotted structure is the main reason for the increase of thrust fluctuation. The method of adopting unequal pole pitch and unequal slot numbers per pole per phase of stator and mover, is proposed to weaken the slot effect when designing the motor slot parameters. Three different motor models are simulated by ANSOFT. The proposed method results in a motor thrust fluctuation coefficient of 8.4%, compared to 49.4% for the conventional method. Therefore, the motor＇s thrust fluctuation is effectively suppressed by the proposed method.展开更多
基金National Natural Science Foundation of China(NSFC)(61575014)Natural Science Foundation of Beijing Municipality(4162038)
文摘A novel slotted optical microdisk resonator, which significantly enhances light–matter interaction and provides a promising approach for increasing the sensitivity of sensors, is theoretically and numerically investigated. In this slotted resonator, the mode splitting is generated due to reflection of the slot. Remarkably, effects of the slot width and angular position on the mode splitting are mainly studied. The results reveal that the mode splitting is a second function of the slot width, and the maximum mode splitting induced by the slot deformation is achieved with 2.7853 × 10~9Hz∕nm. Therefore, the slotted resonator is an excellent candidate for pressure and force sensing. Besides, the influence of the slot angular position on the mode splitting is a cosine curve with the highest sensitivity of 1.23 × 10^(11)Hz∕deg; thus, the optical characteristic demonstrates that the slotted resonator can be used for inertial measurements.
基金supported by the National Natural Science Foundation of China (Grant No.60474021)
文摘The detent force of a permanent magnet linear synchronous motor （PMLSM） is analyzed and the corresponding optimization methods are presented to reduce it. The detent force, which is divided into two components, i.e. resulting from the end effect and resulting from the slotting effect, can be analyzed respectively by the finite element method （FEM）. To reduce the detent force arising from the end effect, several optimal design techniques are utilized, namely, adopting the suitable length and end shape of the primary armature. The detent force resulting from the slotting effect is reduced by means of skewing and adjusting the width of the magnets mounted on the secondary armature, and adopting the fractional slots of the primary armature. The validity of the analytical detent force predictions and the effectiveness of the detent force reduction techniques are verified by the experimental measurements.
文摘Because the mover and stator of a doubly-fed linear motor are both equipped with three-phase windings, the motor enables contactless energy to be transferred from the stator to the mover. Thus, when a doubly-fed linear motor is used in the linear driving system of trains, neither an overhead line nor a third rail is needed. However, the doubly- fed motor will lead to more severe thrust fluctuation than the unilateral motors. In order to overcome this shortcoming, the thrust fluctuation of the doubly-fed motor should be analyzed. In this paper, an expression for motor thrust is derived. It points out that the slot effect caused by the slotted structure is the main reason for the increase of thrust fluctuation. The method of adopting unequal pole pitch and unequal slot numbers per pole per phase of stator and mover, is proposed to weaken the slot effect when designing the motor slot parameters. Three different motor models are simulated by ANSOFT. The proposed method results in a motor thrust fluctuation coefficient of 8.4%, compared to 49.4% for the conventional method. Therefore, the motor＇s thrust fluctuation is effectively suppressed by the proposed method.
