At present, associated flow rule of traditional plastic theory is adopted in the slip line field theory and upper bound method of geotechnical materials. So the stress characteristic line conforms to the velocity line...At present, associated flow rule of traditional plastic theory is adopted in the slip line field theory and upper bound method of geotechnical materials. So the stress characteristic line conforms to the velocity line. It is proved that geotechnical materials do not abide by the associated flow rule. It is impossible for the stress characteristic line to conform to the velocity line. Generalized plastic mechanics theoretically proved that plastic potential surface intersects the Mohr-Coulomb yield surface with an angle, so that the velocity line must be studied by non-associated flow rule. According to limit analysis theory, the theory of slip line field is put forward in this paper, and then the ultimate beating capacity of strip footing is obtained based on the associated flow rule and the non-associated flow nile individually. These two results are identical since the ultimate bearing capacity is independent of flow role. On the contrary, the velocity fields of associated and non-associated flow rules are different which shows the velocity field based on the associat- ed flow rule is incorrect.展开更多
An integration depending on a parameter to the compression of a thick workpiece has been obtained. For the conventional prevailing numerical formulaa definite functional relationship bet-ween and y is found. Therefore...An integration depending on a parameter to the compression of a thick workpiece has been obtained. For the conventional prevailing numerical formulaa definite functional relationship bet-ween and y is found. Therefore a parametric integration can be used to get an analytical solution. Take the slip line field for l/h= 0.121 as an example, the analytical solution is basically the same as the prevailing numerical one. It is justified theoretically that for the slip line field a parametric integration is perfectly possible for a satisfactory analytical solution.展开更多
The axi-symmetric active earth pressure for layered backfills was investigated using the slip line method. Due to different soil properties, the interfaces of the soil layers were considered as discontinuity surface. ...The axi-symmetric active earth pressure for layered backfills was investigated using the slip line method. Due to different soil properties, the interfaces of the soil layers were considered as discontinuity surface. Accordingly, the change of the major principal direction was obtained and a new computation scheme was proposed to deal with the discontinuity in the calculation, finally the slip line method was extended to layered backfills. Results indicate that, the major principal direction, as well as the earth pressure, has a finite jump on passing the soil interfaces. The magnitude of the jump depends on the soil properties mainly. Generally, the active earth pressure when a strong layer is overlying a weak layer is much larger than that when the weak layer is lying on the strong layer. The present solution can be reduced to plane strain case and it has been compared with Rankine's and Coulomb's results, and a good agreement is observed.展开更多
In order to study the mechanism of bearing behavior at the tip of a pile embedded in rock, the generalized nonlinear unified strength criterion and slip line principle for resolving the differential equation systems w...In order to study the mechanism of bearing behavior at the tip of a pile embedded in rock, the generalized nonlinear unified strength criterion and slip line principle for resolving the differential equation systems which govern the stress field were applied to derive the ultimate end beating capacity based on some reasonable hypothesis and failure plane model. Both numerical simulation and test results were compared with the theoretic solution. The results show good consistency with each other and verify the validity of the present approach. The depth effect with respective to embedment ratio and other influence factors like geological strength index, intermediate principal stress, overburden factor, and damage on end bearing capacity were discussed in the analytical solution. The results show that the proposed yield criterion can be much better for investigating the ultimate end bearing performance of rock-socketed pile. The end bearing capacity increases with embedment ratio and the increasing degree is influenced intensely by the above parameters. Furthermore, ignoring intermediate stress effect would underestimate the strength properties of the rock material and lead to a very conservative estimation value.展开更多
The model test result of earth force in the side of anti-slide pile of anchor bars was introduced.There are three groups of the tests.The loads were on the back side of the slope in two groups.The other one was loaded...The model test result of earth force in the side of anti-slide pile of anchor bars was introduced.There are three groups of the tests.The loads were on the back side of the slope in two groups.The other one was loaded just behind the pile by the jack.In order to get the force of the soil,some earth-pressure boxes were used to get the earth pressure on the side of the piles.展开更多
An integration depending on the parameter Ф has been applied to the function Фdx so that an explicit formula of specific pressure calculation and an analytical solution are obtained.It has been found that the analyt...An integration depending on the parameter Ф has been applied to the function Фdx so that an explicit formula of specific pressure calculation and an analytical solution are obtained.It has been found that the analytical solution is basically the same as the prevailing numerical one which is from the formula There- fore,it is justified theoretically that for the slip line field in the compression of a thin workpiece a parametric integra- tion is perfectly possible for satisfactory analytical solution.展开更多
文摘At present, associated flow rule of traditional plastic theory is adopted in the slip line field theory and upper bound method of geotechnical materials. So the stress characteristic line conforms to the velocity line. It is proved that geotechnical materials do not abide by the associated flow rule. It is impossible for the stress characteristic line to conform to the velocity line. Generalized plastic mechanics theoretically proved that plastic potential surface intersects the Mohr-Coulomb yield surface with an angle, so that the velocity line must be studied by non-associated flow rule. According to limit analysis theory, the theory of slip line field is put forward in this paper, and then the ultimate beating capacity of strip footing is obtained based on the associated flow rule and the non-associated flow nile individually. These two results are identical since the ultimate bearing capacity is independent of flow role. On the contrary, the velocity fields of associated and non-associated flow rules are different which shows the velocity field based on the associat- ed flow rule is incorrect.
文摘An integration depending on a parameter to the compression of a thick workpiece has been obtained. For the conventional prevailing numerical formulaa definite functional relationship bet-ween and y is found. Therefore a parametric integration can be used to get an analytical solution. Take the slip line field for l/h= 0.121 as an example, the analytical solution is basically the same as the prevailing numerical one. It is justified theoretically that for the slip line field a parametric integration is perfectly possible for a satisfactory analytical solution.
基金the National Natural Science Foundation of China (No. 50679041)the Shanghai Leading Academic Discipline Project (No. B208)
文摘The axi-symmetric active earth pressure for layered backfills was investigated using the slip line method. Due to different soil properties, the interfaces of the soil layers were considered as discontinuity surface. Accordingly, the change of the major principal direction was obtained and a new computation scheme was proposed to deal with the discontinuity in the calculation, finally the slip line method was extended to layered backfills. Results indicate that, the major principal direction, as well as the earth pressure, has a finite jump on passing the soil interfaces. The magnitude of the jump depends on the soil properties mainly. Generally, the active earth pressure when a strong layer is overlying a weak layer is much larger than that when the weak layer is lying on the strong layer. The present solution can be reduced to plane strain case and it has been compared with Rankine's and Coulomb's results, and a good agreement is observed.
基金Project(2007AA11Z134) supported by the National High-tech Research and Development Program of ChinaProject(10JJ4035) supported by Hunan Provincial Natural Science Foundation of ChinaProject(04SK2008) supported by Hunan Provincial Science and Technology Department,China
文摘In order to study the mechanism of bearing behavior at the tip of a pile embedded in rock, the generalized nonlinear unified strength criterion and slip line principle for resolving the differential equation systems which govern the stress field were applied to derive the ultimate end beating capacity based on some reasonable hypothesis and failure plane model. Both numerical simulation and test results were compared with the theoretic solution. The results show good consistency with each other and verify the validity of the present approach. The depth effect with respective to embedment ratio and other influence factors like geological strength index, intermediate principal stress, overburden factor, and damage on end bearing capacity were discussed in the analytical solution. The results show that the proposed yield criterion can be much better for investigating the ultimate end bearing performance of rock-socketed pile. The end bearing capacity increases with embedment ratio and the increasing degree is influenced intensely by the above parameters. Furthermore, ignoring intermediate stress effect would underestimate the strength properties of the rock material and lead to a very conservative estimation value.
文摘The model test result of earth force in the side of anti-slide pile of anchor bars was introduced.There are three groups of the tests.The loads were on the back side of the slope in two groups.The other one was loaded just behind the pile by the jack.In order to get the force of the soil,some earth-pressure boxes were used to get the earth pressure on the side of the piles.
文摘An integration depending on the parameter Ф has been applied to the function Фdx so that an explicit formula of specific pressure calculation and an analytical solution are obtained.It has been found that the analytical solution is basically the same as the prevailing numerical one which is from the formula There- fore,it is justified theoretically that for the slip line field in the compression of a thin workpiece a parametric integra- tion is perfectly possible for satisfactory analytical solution.
