To avoid the volume expansion of basic oxygen furnace (BOF) slag for use in building materials, a hot slag modification process was proposed to reduce free CaO (f-CaO) in the molten slag. A transient 3D numerical mode...To avoid the volume expansion of basic oxygen furnace (BOF) slag for use in building materials, a hot slag modification process was proposed to reduce free CaO (f-CaO) in the molten slag. A transient 3D numerical model of BOF molten slag modification by SiO_(2) particles was established. The flow and heat transfer of molten slag, movement and dissolution of the modifier, and concentration distribution of f-CaO in slag during the modification of BOF were studied. The distribution of f-CaO concentration is inhomogeneous all over the molten slag. The mixing effect at the slag surface is weaker than that at the half-height plane of the slag. To consume the f-CaO below 2.0 wt.% in the slag, the optimum quantity of the SiO_(2) modifier is 10.0% of the mass of the slag. The fine SiO_(2) particles help attain a lower final mass fraction of f-CaO and a higher SiO_(2) utilization ratio.展开更多
Metallurgical slag is a waste or by-product of the metallurgical process,and its improper disposal can pose negative environmental impacts,including groundwater and soil contamination.The composition and properties of...Metallurgical slag is a waste or by-product of the metallurgical process,and its improper disposal can pose negative environmental impacts,including groundwater and soil contamination.The composition and properties of metallurgical slag are complex,which is usually difficult to use or process directly and requires special treatment and utilization methods.Taking converter slag and blast furnace slag as examples,the research frontiers and development potential were primarily discussed and analyzed in three aspects:the recycling within and outside metallurgical slag plants,the extraction and utilization of thermal energy from metallurgical slag,and the functionalization and social application of metallurgical slag.The metallurgical slag waste heat recovery includes chemical methods and physical methods.Among them,the physical method currently most used was centrifugal granulation to recover heat.Chemical laws could recover hydrogen through the waste heat of metallurgical slag,which could save fuel and reduce CO_(2) generated by fuel combustion.Metallurgical slag is rich in alkaline metal oxides,which can undergo a carbonation reaction with CO_(2) to achieve carbon sequestration in metallurgical slag.Elements such as iron,phosphorus,and silicon contained in metallurgical slag could be used in soil conditioners,cement raw materials,and wastewater treatment.For example,the phosphorus element in the slag could be extracted by melt modification followed by acid leaching and used as a raw material for phosphate fertilizer.Therefore,under the background of China’s carbon neutrality goal,it is important to develop the key technologies of waste heat utilization of metallurgical slag and carbon sequestration of metallurgical slag.展开更多
This study was performed to investigate the removal of phosphate from domestic wastewater using a modified steel slag as the adsorbent. The adsorption effects of alkalinity, salt, water,and thermal modification were i...This study was performed to investigate the removal of phosphate from domestic wastewater using a modified steel slag as the adsorbent. The adsorption effects of alkalinity, salt, water,and thermal modification were investigated. The results showed that thermal activation at 800℃ for 1 hr was the optimum operation to improve the adsorption capacity. The adsorption process of the thermally modified slag was well described by the Elovich kinetic model and the Langmuir isotherm model. The maximum adsorption capacity calculated from the Langmuir model reached 13.62 mg/g. Scanning electron microscopy indicated that the surface of the modified slag was cracked and that the texture became loose after heating. The surface area and pore volume did not change after thermal modification. In the treatment of domestic wastewater, the modified slag bed（35.5 kg） removed phosphate effectively and operated for 158 days until the effluent P rose above the limit concentration of 0.5 mg/L. The phosphate fractionation method, which is often applied in soil research, was used to analyze the phosphate adsorption behavior in the slag bed. The analysis revealed that the total contents of various Ca-P forms accounted for 81.4%-91.1%, i.e., Ca10-P 50.6%-65.1%, Ca8-P 17.8%-25.0%,and Ca2-P 4.66%-9.20%. The forms of Al-P, Fe-P, and O-P accounted for only 8.9%-18.6%. The formation of Ca10-P precipitates was considered to be the main mechanism of phosphate removal in the thermally modified slag bed.展开更多
During the cooling process of AOD（argon-oxygen decarburization）stainless steel slag,the serious disintegrating problem happened,which will cause serious environmental pollution.The disintegrating mechanism of the AO...During the cooling process of AOD（argon-oxygen decarburization）stainless steel slag,the serious disintegrating problem happened,which will cause serious environmental pollution.The disintegrating mechanism of the AOD slag was analyzed in detail,and experimental research on prevention of disintegrating of AOD stainless steel slag was developed by adjusting the basicity of the slag and adding the quartz sand and borax.The disintegrating problem during the cooling process of AOD stainless steel slag is caused by the 2CaO·SiO2phase transformation fromα＇-C2S toγ-C2S.By means of adjusting the basicity of the AOD stainless steel slag from 2to 1.5by adding quartz sand,disintegrating of slag was prevented.But the adding amount must arrive at 15% which increases the difficulty of industrialization.Disintegration of AOD stainless steel slag can be effectively controlled by adding borax,and the adding amount is only 0.5%-0.8%.This method can be easily industrialized.展开更多
基金the National Natural Science Foundation of China(Grant Nos.U1860205 and 52204352)Young Elite Scientist Sponsorship Program by China Association for Science and Technology(Grant No.YESS20200210)Youth Project of Hubei Natural Science Foundation(Grant No.2022CFB593).
文摘To avoid the volume expansion of basic oxygen furnace (BOF) slag for use in building materials, a hot slag modification process was proposed to reduce free CaO (f-CaO) in the molten slag. A transient 3D numerical model of BOF molten slag modification by SiO_(2) particles was established. The flow and heat transfer of molten slag, movement and dissolution of the modifier, and concentration distribution of f-CaO in slag during the modification of BOF were studied. The distribution of f-CaO concentration is inhomogeneous all over the molten slag. The mixing effect at the slag surface is weaker than that at the half-height plane of the slag. To consume the f-CaO below 2.0 wt.% in the slag, the optimum quantity of the SiO_(2) modifier is 10.0% of the mass of the slag. The fine SiO_(2) particles help attain a lower final mass fraction of f-CaO and a higher SiO_(2) utilization ratio.
基金supported by the following funds:Guizhou Science and Technology Support Program Project[Grant No.Guizhou Science and Technology Cooperation Support(2025)General 079]Guizhou Provincial Department of Education’s"Top 100 Schools and Thousand Enterprises in Science andTechnology Research and Development"Project in 2025(Contract Number:Guizhou Education and Technology[2025]No.009)+6 种基金Hebei Province Innovation Ability Improvement Plan(No.23561001D)Hebei Provincial Natural Science Foundation(No.H2022209089)Open Fund Project of the Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education(Grant No.FMRUlab23-03)the National Natural Science Foundation of China(No.52074128)Basic Scientific Research Business Expenses of Colleges and Universities in Hebei Province(Nos.JYG2022001 and JQN2023008)Tangshan Talent Funding Project(No.A202202007),Natural Science Foundation of Hebei Province(No.E2023209107)Foundation of Tangshan Science and Technology Bureau(No.23150219A).
文摘Metallurgical slag is a waste or by-product of the metallurgical process,and its improper disposal can pose negative environmental impacts,including groundwater and soil contamination.The composition and properties of metallurgical slag are complex,which is usually difficult to use or process directly and requires special treatment and utilization methods.Taking converter slag and blast furnace slag as examples,the research frontiers and development potential were primarily discussed and analyzed in three aspects:the recycling within and outside metallurgical slag plants,the extraction and utilization of thermal energy from metallurgical slag,and the functionalization and social application of metallurgical slag.The metallurgical slag waste heat recovery includes chemical methods and physical methods.Among them,the physical method currently most used was centrifugal granulation to recover heat.Chemical laws could recover hydrogen through the waste heat of metallurgical slag,which could save fuel and reduce CO_(2) generated by fuel combustion.Metallurgical slag is rich in alkaline metal oxides,which can undergo a carbonation reaction with CO_(2) to achieve carbon sequestration in metallurgical slag.Elements such as iron,phosphorus,and silicon contained in metallurgical slag could be used in soil conditioners,cement raw materials,and wastewater treatment.For example,the phosphorus element in the slag could be extracted by melt modification followed by acid leaching and used as a raw material for phosphate fertilizer.Therefore,under the background of China’s carbon neutrality goal,it is important to develop the key technologies of waste heat utilization of metallurgical slag and carbon sequestration of metallurgical slag.
基金supported by the Mega-projects of Science Research for Water Environment Improvement of China (Nos. 2013ZX07209-001-003, 2012ZX07307-001-006)
文摘This study was performed to investigate the removal of phosphate from domestic wastewater using a modified steel slag as the adsorbent. The adsorption effects of alkalinity, salt, water,and thermal modification were investigated. The results showed that thermal activation at 800℃ for 1 hr was the optimum operation to improve the adsorption capacity. The adsorption process of the thermally modified slag was well described by the Elovich kinetic model and the Langmuir isotherm model. The maximum adsorption capacity calculated from the Langmuir model reached 13.62 mg/g. Scanning electron microscopy indicated that the surface of the modified slag was cracked and that the texture became loose after heating. The surface area and pore volume did not change after thermal modification. In the treatment of domestic wastewater, the modified slag bed（35.5 kg） removed phosphate effectively and operated for 158 days until the effluent P rose above the limit concentration of 0.5 mg/L. The phosphate fractionation method, which is often applied in soil research, was used to analyze the phosphate adsorption behavior in the slag bed. The analysis revealed that the total contents of various Ca-P forms accounted for 81.4%-91.1%, i.e., Ca10-P 50.6%-65.1%, Ca8-P 17.8%-25.0%,and Ca2-P 4.66%-9.20%. The forms of Al-P, Fe-P, and O-P accounted for only 8.9%-18.6%. The formation of Ca10-P precipitates was considered to be the main mechanism of phosphate removal in the thermally modified slag bed.
基金Sponsored by National Science and Technology Support Plan of China(2009AA064003)
文摘During the cooling process of AOD（argon-oxygen decarburization）stainless steel slag,the serious disintegrating problem happened,which will cause serious environmental pollution.The disintegrating mechanism of the AOD slag was analyzed in detail,and experimental research on prevention of disintegrating of AOD stainless steel slag was developed by adjusting the basicity of the slag and adding the quartz sand and borax.The disintegrating problem during the cooling process of AOD stainless steel slag is caused by the 2CaO·SiO2phase transformation fromα＇-C2S toγ-C2S.By means of adjusting the basicity of the AOD stainless steel slag from 2to 1.5by adding quartz sand,disintegrating of slag was prevented.But the adding amount must arrive at 15% which increases the difficulty of industrialization.Disintegration of AOD stainless steel slag can be effectively controlled by adding borax,and the adding amount is only 0.5%-0.8%.This method can be easily industrialized.
