This paper presents a new designed miniature six DOF （degree of freedom） force/torque sensor. This sensor is fully integrated with a micro DSP （digital signal processor）, so all the signal conditioning, A/D, decou...This paper presents a new designed miniature six DOF （degree of freedom） force/torque sensor. This sensor is fully integrated with a micro DSP （digital signal processor）, so all the signal conditioning, A/D, decoupling, digital-signals serial output are performed in the sensor. Some experimental results are presented to demonstrate the capability of the proposed design. Finally, a neural network was used for decoupling the interacting signals, compared with the conventional method using the inverse matrix, this new method is more accurate.展开更多
In order to adapt to the specific task, the six-axis dynamic contact force between end-effectors of intelligent robots and working condition needs to be perceived. Therefore, the dynamic property of six-axis force sen...In order to adapt to the specific task, the six-axis dynamic contact force between end-effectors of intelligent robots and working condition needs to be perceived. Therefore, the dynamic property of six-axis force sensor which is installed on the end-effectors of intelligent robots will have influence on the veracity of detection and judgment to working environment contact force by intelligent robots directly. In this paper, dynamic analysis to double-layer and pre-stressed multi-limb six-axis force sensor is conducted. First, the structure of the sensor is introduced, and the limb number is confirmed by introducing the related definitions of convex analysis. Then, based on vibration of multiple-degree-of-freedom system, a mechanical vibration simplified model of double-layer and pre-stressed multiple limb six-axis force sensor is set up. After that, movement differential equations of sensor and the response of analytical expression are deduced, and the movement differential equations is solved. Finally, taking the double-layer and pre-stressed seven limb six-axis force sensor as an example, numerical calculation and simulation of deriving result is conducted, which verify the correctness and feasibility of the theoretical analysis.展开更多
A novel orthogonal-parallel six-axis force/torque sensor is studied based on a modified Stewart platform architecture,and the optimal design and experiment research of the sensor are discussed.Firstly,the model of ort...A novel orthogonal-parallel six-axis force/torque sensor is studied based on a modified Stewart platform architecture,and the optimal design and experiment research of the sensor are discussed.Firstly,the model of orthogonal parallel six-axis force/torque sensor based on improved Stewart platform architecture and its static mathematical model are proposed.Secondly,according to the actual working condition of the sensor,the sensor is optimized and the optimal solution is obtained.Then,the experimental prototype and calibration system is developed.Finally,the superiority of the sensor structure and the effectiveness of the optimization method are verified by calibration experiments.The results of the proposed method are useful for the further research and application of the orthogonal-parallel six-axis force/torque sensor.展开更多
A six-axis force sensor with parallel 8/4-4 structure is introduced and its measurement principle is analyzed.Based on condition numbers of Jacobian matrix spectral norm of the sensor,the relationship between the forc...A six-axis force sensor with parallel 8/4-4 structure is introduced and its measurement principle is analyzed.Based on condition numbers of Jacobian matrix spectral norm of the sensor,the relationship between the force and moment isotropy and some structural parameters is deduced.Orthogonal test methods are used to determine the degree of primary and secondary factors that have significant effect on sensor characteristics.Furthermore,the relationship between each performance index and the structural parameters of the sensor is analyzed by the method of the atlas,which lays a foundation for structural optimization design of the force sensor.展开更多
Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pell...Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.展开更多
Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive ...Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate response.However,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of time.Herein we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor application.We systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 nW.The sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on it.Moreover,there was almost no performance loss for the device as left in the air for two months.展开更多
Unbalanced force produced by the unbalanced mass will affect vibrations of rotor systems,which probably results in the components failures of rotating machinery.To study the effects of unbalanced mass on the vibration...Unbalanced force produced by the unbalanced mass will affect vibrations of rotor systems,which probably results in the components failures of rotating machinery.To study the effects of unbalanced mass on the vibration characteristics of rotor systems,a flexible rotor system model considering the unbalanced mass is proposed.The time-varying bearing force is considered.The developed model is verified by the experimental and theoretical frequency spectrums.The displacements and axis orbits of flexible and rigid rotor systems are compared.The results show that the unbalanced mass will affect the vibration characteristics of rotor system.This model can be more suitable and effective to calculate vibration characteristics of rotor system with the flexible deformation and unbalanced mass.This paper provides a new reference and research method for predicting the vibrations of flexible rotor system considering the unbalanced mass.展开更多
A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which ca...A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which can accurately describe the strain and stress states in IF.Based on strain analysis,the model can predict the material thickness distribution and neck height after IF.By considering contact area,strain characteristics,material thickness changes,and friction,the model can predict specific moments and corresponding values of maximum axial forming force and maximum horizontal forming force during IF.In addition,an IF experiment involving different tool diameters,flanging diameters,and opening hole diameters is conducted.On the basis of the experimental strain paths,the strain characteristics of different deformation zones are studied,and the stable strain ratio is quantitatively described through two dimensionless parameters:relative tool diameter and relative hole diameter.Then,the changing of material thickness and forming force in IF,and the variation of minimum material thickness,neck height,maximum axial forming force,and maximum horizontal forming force with flanging parameters are studied,and the reliability of the analytical model is verified in this process.Finally,the influence of the horizontal forming force on the tool design and the fluctuation of the forming force are explained.展开更多
Moles exhibit highly effective capabilities due to their unique body structures and digging techniques,making them ideal models for biomimetic research.However,a major challenge for mole-inspired robots lies in overco...Moles exhibit highly effective capabilities due to their unique body structures and digging techniques,making them ideal models for biomimetic research.However,a major challenge for mole-inspired robots lies in overcoming resistance in granular media when burrowing with forelimbs.In the absence of effective forepaw design strategies,most robotic designs rely on increased power to enhance performance.To address this issue,this paper employs Resistive Force Theory to optimize mole-inspired forepaws,aiming to enhance burrowing efficiency.By analyzing the relationship between geometric parameters and burrowing forces,we propose several forepaw design variations.Through granular resistance assessments,an effective forepaw configuration is identified and further refined using parameters such as longitudinal and transverse curvature.Subsequently,the Particle Swarm Optimization algorithm is applied to determine the optimal forepaw design.In force-loading tests,the optimized forepaw demonstrated a 79.44%reduction in granular lift force and a 22.55%increase in propulsive force compared with the control group.In robotic burrowing experiments,the optimized forepaw achieved the longest burrow displacement(179.528 mm)and the lowest burrowing lift force(0.9355 mm/s),verifying its effectiveness in reducing the lift force and enhancing the propulsive force.展开更多
Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interfa...Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interface dynamics influenced by complex topology commonly leads to non-wetting fluid trapping.Particularly,the underlying mechanisms under viscously unfavorable conditions remain unclear.This study employs a direct numerical simulation method to simulate forced imbibition through the reconstructed digital rocks of sandstone.The interface dynamics and fluid–fluid interactions are investigated through transient simulations,while the pore topology metrics are introduced to analyze the impact on steady-state residual fluid distribution obtained by a pseudo-transient scheme.The results show that the cooperative pore-filling process promoted by corner flow is dominant at low capillary numbers.This leads to unstable inlet pressure,mass flow,and interface curvature,which correspond to complicated interface dynamics and higher residual fluid saturation.During forced imbibition,the interface curvature gradually increases,with the pore-filling mechanisms involving the cooperation of main terminal meniscus movement and arc menisci filling.Complex topology with small diameter pores may result in the destabilization of interface curvature.The residual fluid saturation is negatively correlated with porosity and pore throat size,and positively correlated with tortuosity and aspect ratio.A large mean coordination number characterizing global connectivity promotes imbibition.However,high connectivity characterized by the standardized Euler number corresponding to small pores is associated with a high probability of non-wetting fluid trapping.展开更多
Due to batteries inconsistencies and potential faults in battery management systems,slight overcharging remains a common yet insufficiently understood safety risk,lacking effective warning methods.To illuminate the de...Due to batteries inconsistencies and potential faults in battery management systems,slight overcharging remains a common yet insufficiently understood safety risk,lacking effective warning methods.To illuminate the degradation behavior and failure mechanism of various overcharged states(100%SOC,105%SOC,110%SOC,and 115%SOC),multiple advanced in-situ characterization techniques(accelerating rate calorimeter,electrochemical impedance spectroscopy,ultrasonic scanning,and expansion instrument)were utilized.Additionally,re-overcharge-induced thermal runaway(TR)tests were conducted,with a specific emphasis on the evolution of the expansion force signal.Results indicated significant degradation at 110%SOC including conductivity loss,loss of lithium inventory,and loss of active material accompanied by internal gas generation.These failure behaviors slow down the expansion force rate during reovercharging,reducing the efficacy of active warnings that depend on rate thresholds of expansion force.Specifically,the warning time for 115%SOC battery is only 144 s,which is 740 s shorter than that for fresh battery,and the time to TR is advanced by 9 min.Moreover,the initial self-heating temperature(T1)is reduced by 62.4℃compared to that of fresh battery,reaching only 70.8℃.To address the low safety of overcharged batteries,a passive overcharge warning method utilizing relaxation expansion force was proposed,based on the continued gas generation after stopping charging,leading to a sustained increase in force.Compared to active methods that rely on thresholds of expansion force rate,the passive method can issue warnings 115 s earlier.By combining the passive and active warning methods,guaranteed effective overcharge warning can be issued 863-884 s before TR.This study introduces a novel perspective for enhancing the safety of batteries.展开更多
Astronomical extreme events or phenomena include black holes as well as nebulae systems that resemble the Milky Way. Meteorological extreme events or phenomena include tornadoes and tropical cyclones. The new high ene...Astronomical extreme events or phenomena include black holes as well as nebulae systems that resemble the Milky Way. Meteorological extreme events or phenomena include tornadoes and tropical cyclones. The new high energy state of matter expanding outwards by spin jets from the two poles of an astronomical black hole, the new high energy state of matter in a funnel-shaped vortex showed a meteorological tornado expanding downwards from a rotated disk of cumulonimbus clouds, the new high energy state of matter in a tropical cyclone and the new high energy state of a nebulae system converging celestial materials are phenomena across disciplines and multiple time-space scales that have not yet been physically explained. In this paper, the theory of orthogonal collision in the rotational contraction continuum is used to unify the understanding of diverse extreme events or phenomena through a single dynamical mechanism, offering insights into natural processes across disciplines. In the field of astronomy, the orthogonal collision of two-beam rotating and contracting particles or stars associated with centripetal forces forms a new high-energy state of matter at the collision point and the new high-energy particles have expanding forces outward to both sides of the collision plane. In the field of meteorology, the orthogonal collision of multiple horizontally rotating and contracting airflows associated with centripetal forces forms a new high energy state of matter at the collision point as well as an updraft force and a downdraft force vertically. The updraft force and downdraft force formed by the collision of anomalous wet airflows in the lower atmosphere can well indicate tornado, thunderstorm and extreme precipitation. The orthogonal collision theory can be applied to explain new states of matter in disciplines from the astronomical scale to the meteorological scale and the Planck scale.展开更多
The undeformed chip thickness and grinding force are key parameters for revealing the material removal mechanism in the grinding process.However,they are difficult to be well expressed due to the ununiformed protrusio...The undeformed chip thickness and grinding force are key parameters for revealing the material removal mechanism in the grinding process.However,they are difficult to be well expressed due to the ununiformed protrusion height and random position distribution of abrasive grains on the abrasive wheel surface.This study investigated the distribution of undeformed chip thickness and grinding force considering the non-uniform characteristics of abrasive wheel in the grinding of K4002 nickel-based superalloy.First,a novel grinding force model was established through a kinematic-geometric analysis and a grain-workpiece contact analysis.Then,a series of grinding experiments were conducted for verifying the model.The results indicate that the distribution of undeformed chip thickness is highly consistent with the Gaussian distribution formula.The increase in the grinding depth mainly leads to an increase in the average value of Gaussian distribution.On the contrary,the increase in the workpiece infeed speed or the decrease in the grinding speed mainly increases the standard deviation of Gaussian distribution.The average and maximum errors of the grinding force model are 4.9%and 14.6%respectively,indicating that the model is of high predication accuracy.展开更多
Vascular smooth muscle cells (VSMCs) in the arterial walls play important roles in regulating vascular contraction and dilation. VSMCs actively remodel the arterial walls and dedifferentiate from the contractile to th...Vascular smooth muscle cells (VSMCs) in the arterial walls play important roles in regulating vascular contraction and dilation. VSMCs actively remodel the arterial walls and dedifferentiate from the contractile to the synthetic phenotype under pathological conditions. The mechanism underlying phenotypic transition of VSMCs is important for understanding its role in the pathophysiology of disease. Although numerous studies have reported various biochemical pathways that stimulate the phenotypic transition of VSMCs, very little is known about relation between their phenotypic transition and cellular traction force, which affects many cellular functions. In this study, we induced the differentiation of cultured VSMCs from the synthetic to the contractile phenotype by a low-serum cultivation and investigated changes in the cell traction forces using traction force microscopy technique. The expression of α-SMA, a contractile phenotype marker protein, was significantly upregulated with maturation of actin stress fibers in the low-serum culture, indicating VSMC differentiation was promoted in our experiments. The cells changed their morphology to an elongated bipolar shape, and the direction of the cell traction forces tended to align in the direction of the cell’s major axis. Despite the promotion of contractile differentiation in VSMCs, the overall cell traction forces were significantly reduced, indicating that excessive cell mechanical tension, which might induce cell proliferation and migration, was suppressed during contractile differentiation. These results suggest that suppression of cell traction force and enhanced force polarity might be key factors in VSMC differentiation induced by low serum culture.展开更多
Rail weld irregularities are one of the primary excitation sources for vehicle-track interaction dynamics in modern high-speed railways.They can cause significant wheel-rail dynamic interactions,leading to wheel-rail ...Rail weld irregularities are one of the primary excitation sources for vehicle-track interaction dynamics in modern high-speed railways.They can cause significant wheel-rail dynamic interactions,leading to wheel-rail noise,component damage,and deterioration.Few researchers have employed the vehicle-track interaction dynamic model to study the dynamic interactions between wheel and rail induced by rail weld geometry irregularities.However,the cosine wave model used to simulate rail weld irregularities mainly focuses on the maximum value and neglects the geometric shape.In this study,novel theoretical models were developed for three categories of rail weld irregularities,based on measurements of the high-speed railway from Beijing to Shanghai.The vertical dynamic forces in the time and frequency domains were compared under different running speeds.These forces generated by the rail weld irregularities that were measured and modeled,respectively,were compared to validate the accuracy of the proposed model.Finally,based on the numerical study,the impact force due to rail weld irrregularity is modeled using an Artificial Neural Network(ANN),and the optimum combination of parameters for this model is found.The results showed that the proposed model provided a more accurate wheel/rail dynamic evaluation caused by rail weld irregularities than that established in the literature.The ANN model used in this paper can effectively predict the impact force due to rail weld irrregularity while reducing the computation time.展开更多
Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this devic...Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this device in orthodontic treatment. Methods: A finite element model was constructed after extracting the mandibular first premolar, and a long-arm bracket with a traction height of 6 mm was placed on the labial side of the mandibular canine. Three working conditions of 50 g, 100 g, and 150 g were simulated, and the magnitude and distribution of von Mises stress in the periodontal ligament were compared for each condition. Results: The maximum von Mises stress in the periodontal ligament was 0.013281 MPa in the 50 g condition, 0.02536 MPa in the 100 g condition, and 0.035549 MPa in the 150 g condition. As the orthodontic force increased, the stress distribution area in the periodontal ligament also expanded. Conclusion: A 100 g orthodontic force is the most suitable when using long-arm brackets, providing a relatively uniform stress distribution in the periodontal ligament and keeping the stress within a reasonable range.展开更多
基金Supported by the National Natural Science Foundation of China （ No. 60275032 ） and the Supported bv the High Technology Research and Development Programme of China （ No. 2003AA404220）.
文摘This paper presents a new designed miniature six DOF （degree of freedom） force/torque sensor. This sensor is fully integrated with a micro DSP （digital signal processor）, so all the signal conditioning, A/D, decoupling, digital-signals serial output are performed in the sensor. Some experimental results are presented to demonstrate the capability of the proposed design. Finally, a neural network was used for decoupling the interacting signals, compared with the conventional method using the inverse matrix, this new method is more accurate.
基金Supported by the National Natural Science Foundation of China(No.51505124)the Natural Science Foundation of Hebei Province(No.E2016209312)the Foster Fund Projects of North China University of Science and Technology(No.JP201505)
文摘In order to adapt to the specific task, the six-axis dynamic contact force between end-effectors of intelligent robots and working condition needs to be perceived. Therefore, the dynamic property of six-axis force sensor which is installed on the end-effectors of intelligent robots will have influence on the veracity of detection and judgment to working environment contact force by intelligent robots directly. In this paper, dynamic analysis to double-layer and pre-stressed multi-limb six-axis force sensor is conducted. First, the structure of the sensor is introduced, and the limb number is confirmed by introducing the related definitions of convex analysis. Then, based on vibration of multiple-degree-of-freedom system, a mechanical vibration simplified model of double-layer and pre-stressed multiple limb six-axis force sensor is set up. After that, movement differential equations of sensor and the response of analytical expression are deduced, and the movement differential equations is solved. Finally, taking the double-layer and pre-stressed seven limb six-axis force sensor as an example, numerical calculation and simulation of deriving result is conducted, which verify the correctness and feasibility of the theoretical analysis.
基金Supported by the National Natural Science Foundation of China(No.51505124)Foster Fund Projects of North China University of Science and Technology(No.JP201505)the Science and Technology Research Project of Hebei Province(No.ZD2020151).
文摘A novel orthogonal-parallel six-axis force/torque sensor is studied based on a modified Stewart platform architecture,and the optimal design and experiment research of the sensor are discussed.Firstly,the model of orthogonal parallel six-axis force/torque sensor based on improved Stewart platform architecture and its static mathematical model are proposed.Secondly,according to the actual working condition of the sensor,the sensor is optimized and the optimal solution is obtained.Then,the experimental prototype and calibration system is developed.Finally,the superiority of the sensor structure and the effectiveness of the optimization method are verified by calibration experiments.The results of the proposed method are useful for the further research and application of the orthogonal-parallel six-axis force/torque sensor.
基金supported by the Open Foundation of Graduate Innovation Base(Laboratory)of Nanjing University of Aeronautics and Astronautics (No.kfjj20170512)the National Natural Science Foundation of China(No. 51175263)
文摘A six-axis force sensor with parallel 8/4-4 structure is introduced and its measurement principle is analyzed.Based on condition numbers of Jacobian matrix spectral norm of the sensor,the relationship between the force and moment isotropy and some structural parameters is deduced.Orthogonal test methods are used to determine the degree of primary and secondary factors that have significant effect on sensor characteristics.Furthermore,the relationship between each performance index and the structural parameters of the sensor is analyzed by the method of the atlas,which lays a foundation for structural optimization design of the force sensor.
基金financial support by the National Key Research and Development Program of China(No.2023YFC2907801)the Hunan Provincial Natural Science Foundation of China(No.2023JJ40760)the Scientific and Technological Project of Yunnan Precious Metals Laboratory,China(No.YPML-2023050276)。
文摘Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.
基金financially supported by the National Natural Science Foundation of China(Nos.52272160,U2330112,and 52002254)Sichuan Science and Technology Foundation(Nos.2020YJ0262,2021YFH0127,2022YFH0083,2022YFSY0045,and 2023YFSY0002)+1 种基金the Chunhui Plan of Ministry of Education,Fundamental Research Funds for the Central Universities,China(No.YJ201893)the Foundation of Key Laboratory of Lidar and Device,Sichuan Province,China(No.LLD2023-006)。
文摘Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate response.However,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of time.Herein we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor application.We systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 nW.The sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on it.Moreover,there was almost no performance loss for the device as left in the air for two months.
基金Support by Shanxi Provincial Key Research and Development Plan of China(Grant No.2024GH-ZDXM-29)National Natural Science Foundation of China(Grant No.52175120)Shaanxi Provincial Innovation Capability Support Program of China(Grant No.2024RS-CXTD-15)。
文摘Unbalanced force produced by the unbalanced mass will affect vibrations of rotor systems,which probably results in the components failures of rotating machinery.To study the effects of unbalanced mass on the vibration characteristics of rotor systems,a flexible rotor system model considering the unbalanced mass is proposed.The time-varying bearing force is considered.The developed model is verified by the experimental and theoretical frequency spectrums.The displacements and axis orbits of flexible and rigid rotor systems are compared.The results show that the unbalanced mass will affect the vibration characteristics of rotor system.This model can be more suitable and effective to calculate vibration characteristics of rotor system with the flexible deformation and unbalanced mass.This paper provides a new reference and research method for predicting the vibrations of flexible rotor system considering the unbalanced mass.
基金supported in part by financial support from the National Key R&D Program of China(No.2023YFB3407003)the National Natural Science Foundation of China(No.52375378).
文摘A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which can accurately describe the strain and stress states in IF.Based on strain analysis,the model can predict the material thickness distribution and neck height after IF.By considering contact area,strain characteristics,material thickness changes,and friction,the model can predict specific moments and corresponding values of maximum axial forming force and maximum horizontal forming force during IF.In addition,an IF experiment involving different tool diameters,flanging diameters,and opening hole diameters is conducted.On the basis of the experimental strain paths,the strain characteristics of different deformation zones are studied,and the stable strain ratio is quantitatively described through two dimensionless parameters:relative tool diameter and relative hole diameter.Then,the changing of material thickness and forming force in IF,and the variation of minimum material thickness,neck height,maximum axial forming force,and maximum horizontal forming force with flanging parameters are studied,and the reliability of the analytical model is verified in this process.Finally,the influence of the horizontal forming force on the tool design and the fluctuation of the forming force are explained.
基金financially supported in-part by the National Natural Science Foundation of China(52275011)the Natural Science Foundation of Guangdong Province(2023B1515020080)+3 种基金the Natural Science Foundation of Guangzhou(2024A04J2552)the Fundamental Research Funds for the Central Universities,the Young Elite Scientists Sponsorship Program by the China Association for Science and Technology(CAST)(2021QNRC001)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2023A1515011253)the Higher Education Institution Featured Innovation Project of Department of Education of Guangdong Province(GrantNo.2023KTSCX138).
文摘Moles exhibit highly effective capabilities due to their unique body structures and digging techniques,making them ideal models for biomimetic research.However,a major challenge for mole-inspired robots lies in overcoming resistance in granular media when burrowing with forelimbs.In the absence of effective forepaw design strategies,most robotic designs rely on increased power to enhance performance.To address this issue,this paper employs Resistive Force Theory to optimize mole-inspired forepaws,aiming to enhance burrowing efficiency.By analyzing the relationship between geometric parameters and burrowing forces,we propose several forepaw design variations.Through granular resistance assessments,an effective forepaw configuration is identified and further refined using parameters such as longitudinal and transverse curvature.Subsequently,the Particle Swarm Optimization algorithm is applied to determine the optimal forepaw design.In force-loading tests,the optimized forepaw demonstrated a 79.44%reduction in granular lift force and a 22.55%increase in propulsive force compared with the control group.In robotic burrowing experiments,the optimized forepaw achieved the longest burrow displacement(179.528 mm)and the lowest burrowing lift force(0.9355 mm/s),verifying its effectiveness in reducing the lift force and enhancing the propulsive force.
基金supported by the National Natural Science Foundation of China(Grant Nos.42172159 and 42302143)the Postdoctora Fellowship Program of the China Postdoctoral Science Foundation(CPSF)(Grant No.GZB20230864).
文摘Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interface dynamics influenced by complex topology commonly leads to non-wetting fluid trapping.Particularly,the underlying mechanisms under viscously unfavorable conditions remain unclear.This study employs a direct numerical simulation method to simulate forced imbibition through the reconstructed digital rocks of sandstone.The interface dynamics and fluid–fluid interactions are investigated through transient simulations,while the pore topology metrics are introduced to analyze the impact on steady-state residual fluid distribution obtained by a pseudo-transient scheme.The results show that the cooperative pore-filling process promoted by corner flow is dominant at low capillary numbers.This leads to unstable inlet pressure,mass flow,and interface curvature,which correspond to complicated interface dynamics and higher residual fluid saturation.During forced imbibition,the interface curvature gradually increases,with the pore-filling mechanisms involving the cooperation of main terminal meniscus movement and arc menisci filling.Complex topology with small diameter pores may result in the destabilization of interface curvature.The residual fluid saturation is negatively correlated with porosity and pore throat size,and positively correlated with tortuosity and aspect ratio.A large mean coordination number characterizing global connectivity promotes imbibition.However,high connectivity characterized by the standardized Euler number corresponding to small pores is associated with a high probability of non-wetting fluid trapping.
基金supported by the National Natural Science Foundation of China(52476200,52106244)the Guangdong Basic and Applied Basic Research Foundation(2024A1515030124)+1 种基金the Science and Technology Project of China Southern Power Grid under Grant GDKJXM20230246(030100KC23020017)the Fundamental Research Funds for the Central Universities。
文摘Due to batteries inconsistencies and potential faults in battery management systems,slight overcharging remains a common yet insufficiently understood safety risk,lacking effective warning methods.To illuminate the degradation behavior and failure mechanism of various overcharged states(100%SOC,105%SOC,110%SOC,and 115%SOC),multiple advanced in-situ characterization techniques(accelerating rate calorimeter,electrochemical impedance spectroscopy,ultrasonic scanning,and expansion instrument)were utilized.Additionally,re-overcharge-induced thermal runaway(TR)tests were conducted,with a specific emphasis on the evolution of the expansion force signal.Results indicated significant degradation at 110%SOC including conductivity loss,loss of lithium inventory,and loss of active material accompanied by internal gas generation.These failure behaviors slow down the expansion force rate during reovercharging,reducing the efficacy of active warnings that depend on rate thresholds of expansion force.Specifically,the warning time for 115%SOC battery is only 144 s,which is 740 s shorter than that for fresh battery,and the time to TR is advanced by 9 min.Moreover,the initial self-heating temperature(T1)is reduced by 62.4℃compared to that of fresh battery,reaching only 70.8℃.To address the low safety of overcharged batteries,a passive overcharge warning method utilizing relaxation expansion force was proposed,based on the continued gas generation after stopping charging,leading to a sustained increase in force.Compared to active methods that rely on thresholds of expansion force rate,the passive method can issue warnings 115 s earlier.By combining the passive and active warning methods,guaranteed effective overcharge warning can be issued 863-884 s before TR.This study introduces a novel perspective for enhancing the safety of batteries.
文摘Astronomical extreme events or phenomena include black holes as well as nebulae systems that resemble the Milky Way. Meteorological extreme events or phenomena include tornadoes and tropical cyclones. The new high energy state of matter expanding outwards by spin jets from the two poles of an astronomical black hole, the new high energy state of matter in a funnel-shaped vortex showed a meteorological tornado expanding downwards from a rotated disk of cumulonimbus clouds, the new high energy state of matter in a tropical cyclone and the new high energy state of a nebulae system converging celestial materials are phenomena across disciplines and multiple time-space scales that have not yet been physically explained. In this paper, the theory of orthogonal collision in the rotational contraction continuum is used to unify the understanding of diverse extreme events or phenomena through a single dynamical mechanism, offering insights into natural processes across disciplines. In the field of astronomy, the orthogonal collision of two-beam rotating and contracting particles or stars associated with centripetal forces forms a new high-energy state of matter at the collision point and the new high-energy particles have expanding forces outward to both sides of the collision plane. In the field of meteorology, the orthogonal collision of multiple horizontally rotating and contracting airflows associated with centripetal forces forms a new high energy state of matter at the collision point as well as an updraft force and a downdraft force vertically. The updraft force and downdraft force formed by the collision of anomalous wet airflows in the lower atmosphere can well indicate tornado, thunderstorm and extreme precipitation. The orthogonal collision theory can be applied to explain new states of matter in disciplines from the astronomical scale to the meteorological scale and the Planck scale.
基金financially supported by the National Natural Science Foundation of China(Nos.92160301,92060203,52175415 and 52205475)the Science Center for Gas Turbine Project(Nos.P2022-AB-Ⅳ-002-001 and P2023-B-Ⅳ-003-001)+3 种基金the Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology(No.JSKL2223K01)the Natural Science Foundation of Jiangsu Province(No.BK20210295)the Superior Postdoctoral Project of Jiangsu Province(No.2022ZB215)the Henan Science and Technology Public Relations Project(No.212102210445).
文摘The undeformed chip thickness and grinding force are key parameters for revealing the material removal mechanism in the grinding process.However,they are difficult to be well expressed due to the ununiformed protrusion height and random position distribution of abrasive grains on the abrasive wheel surface.This study investigated the distribution of undeformed chip thickness and grinding force considering the non-uniform characteristics of abrasive wheel in the grinding of K4002 nickel-based superalloy.First,a novel grinding force model was established through a kinematic-geometric analysis and a grain-workpiece contact analysis.Then,a series of grinding experiments were conducted for verifying the model.The results indicate that the distribution of undeformed chip thickness is highly consistent with the Gaussian distribution formula.The increase in the grinding depth mainly leads to an increase in the average value of Gaussian distribution.On the contrary,the increase in the workpiece infeed speed or the decrease in the grinding speed mainly increases the standard deviation of Gaussian distribution.The average and maximum errors of the grinding force model are 4.9%and 14.6%respectively,indicating that the model is of high predication accuracy.
文摘Vascular smooth muscle cells (VSMCs) in the arterial walls play important roles in regulating vascular contraction and dilation. VSMCs actively remodel the arterial walls and dedifferentiate from the contractile to the synthetic phenotype under pathological conditions. The mechanism underlying phenotypic transition of VSMCs is important for understanding its role in the pathophysiology of disease. Although numerous studies have reported various biochemical pathways that stimulate the phenotypic transition of VSMCs, very little is known about relation between their phenotypic transition and cellular traction force, which affects many cellular functions. In this study, we induced the differentiation of cultured VSMCs from the synthetic to the contractile phenotype by a low-serum cultivation and investigated changes in the cell traction forces using traction force microscopy technique. The expression of α-SMA, a contractile phenotype marker protein, was significantly upregulated with maturation of actin stress fibers in the low-serum culture, indicating VSMC differentiation was promoted in our experiments. The cells changed their morphology to an elongated bipolar shape, and the direction of the cell traction forces tended to align in the direction of the cell’s major axis. Despite the promotion of contractile differentiation in VSMCs, the overall cell traction forces were significantly reduced, indicating that excessive cell mechanical tension, which might induce cell proliferation and migration, was suppressed during contractile differentiation. These results suggest that suppression of cell traction force and enhanced force polarity might be key factors in VSMC differentiation induced by low serum culture.
基金supported by Natural Science Foundation of China(52178441)the Scientific Research Projects of the China Academy of Railway Sciences Co.,Ltd.(Grant No.2022YJ043).
文摘Rail weld irregularities are one of the primary excitation sources for vehicle-track interaction dynamics in modern high-speed railways.They can cause significant wheel-rail dynamic interactions,leading to wheel-rail noise,component damage,and deterioration.Few researchers have employed the vehicle-track interaction dynamic model to study the dynamic interactions between wheel and rail induced by rail weld geometry irregularities.However,the cosine wave model used to simulate rail weld irregularities mainly focuses on the maximum value and neglects the geometric shape.In this study,novel theoretical models were developed for three categories of rail weld irregularities,based on measurements of the high-speed railway from Beijing to Shanghai.The vertical dynamic forces in the time and frequency domains were compared under different running speeds.These forces generated by the rail weld irregularities that were measured and modeled,respectively,were compared to validate the accuracy of the proposed model.Finally,based on the numerical study,the impact force due to rail weld irrregularity is modeled using an Artificial Neural Network(ANN),and the optimum combination of parameters for this model is found.The results showed that the proposed model provided a more accurate wheel/rail dynamic evaluation caused by rail weld irregularities than that established in the literature.The ANN model used in this paper can effectively predict the impact force due to rail weld irrregularity while reducing the computation time.
文摘Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this device in orthodontic treatment. Methods: A finite element model was constructed after extracting the mandibular first premolar, and a long-arm bracket with a traction height of 6 mm was placed on the labial side of the mandibular canine. Three working conditions of 50 g, 100 g, and 150 g were simulated, and the magnitude and distribution of von Mises stress in the periodontal ligament were compared for each condition. Results: The maximum von Mises stress in the periodontal ligament was 0.013281 MPa in the 50 g condition, 0.02536 MPa in the 100 g condition, and 0.035549 MPa in the 150 g condition. As the orthodontic force increased, the stress distribution area in the periodontal ligament also expanded. Conclusion: A 100 g orthodontic force is the most suitable when using long-arm brackets, providing a relatively uniform stress distribution in the periodontal ligament and keeping the stress within a reasonable range.
