There is proposed an adaptive sliding controller in task space on the base of the linear Newton-Euler dynamic equation of motion platform in a six-DOF flight simulator. The uncertain parameters are divided into two gr...There is proposed an adaptive sliding controller in task space on the base of the linear Newton-Euler dynamic equation of motion platform in a six-DOF flight simulator. The uncertain parameters are divided into two groups： the constant and the time-varying. The controller identifies constant uncertain parameters using nonlinear adaptive controller associated with elimination of the influences of time-varying uncertain parameters and compensation of the external disturbance using sliding control. The results of numerical simulation attest to the capability of this control scheme not only to, with deadly accuracy, identify parameters of motion platform such as load, inertia moments and mass center, but also effectively improve the robustness of the system.展开更多
This study investigates the effect of nacelle motions on the rotor performance and drivetrain dynamics of floating offshore wind turbines(FOWTs)through fully coupled aero-hydro-elastic-servo-mooring simulations.Using ...This study investigates the effect of nacelle motions on the rotor performance and drivetrain dynamics of floating offshore wind turbines(FOWTs)through fully coupled aero-hydro-elastic-servo-mooring simulations.Using the National Renewable Energy Laboratory 5 MW monopile-supported offshore wind turbine and the OC4 DeepCwind semisubmersible wind turbine as case studies,the research addresses the complex dynamic responses resulting from the interaction among wind,waves,and turbine structures.Detailed multi-body dynamics models of wind turbines,including drivetrain components,are created within the SIMPACK framework.Meanwhile,the mooring system is modeled using a lumped-mass method.Various operational conditions are simulated through five wind-wave load cases.Results demonstrate that nacelle motions significantly influence rotor speed,thrust,torque,and power output,as well as the dynamic loads on drivetrain components.These findings highlight the need for advanced simulation techniques for the design and optimization of FOWTs to ensure reliable performance and longevity.展开更多
Hydrodynamic numerical simulations are used to conduct structural analyses and inform the design of engineered marine structures.In this paper,a hydrodynamic numerical model of“Nanhai Tiaozhan”(NHTZ)FPS platform was...Hydrodynamic numerical simulations are used to conduct structural analyses and inform the design of engineered marine structures.In this paper,a hydrodynamic numerical model of“Nanhai Tiaozhan”(NHTZ)FPS platform was established according to its design specifications.The model was assessed with two sets of field monitoring data representing harsh and conventional sea states.The motion responses of the platform according to the measured data and the hydrodynamic simulation were compared by reviewing their statistical characteristics,distributions,and spectrum characteristics.The comparison showed that the hydrodynamic model could correctly simulate the frequency domain characteristics of the motion responses of the platform.However,the simulation underestimated the reciprocating motions of the floating body and the influence of slow drift on the motion of the platform.Meanwhile,analysis of the monitoring data revealed that the translational degrees of freedom(DOF)and rotational DOF of the platform were coupled,but these coupled motion states were not apparent in the hydrodynamic simulation.展开更多
The motional payloads on stabilized platform must be linked by some cable harnesses with other immobile apparatus.During the operation of stabilized platform,these cable harnesses can create spring disturbance torque ...The motional payloads on stabilized platform must be linked by some cable harnesses with other immobile apparatus.During the operation of stabilized platform,these cable harnesses can create spring disturbance torque which is exerted on the stabilized platform and then reduce the stabilizing precision.None of current studies can deal with the spring disturbance torque problem.To analyze the spring disturbance toque,a dynamic thin rod model is presented for simulating the motional cable harness which is based on the Kirchhoff rod theorem and can consider the geometrically non-linear effects.The internal bending and torsion restoring torques are simulated and then a predictive analysis of the disturbance torque can be performed in motional cable routing design.This model is solved with differential quadrature method（DQM）.By using zeros of the Chebyshev polynomial as the grid points,the arc-coordinate is discretized to obtain a set of ordinary differential equations in time domain which is solved by implied method to obtain the profile and internal force of cable harness.The accuracy of this model is validated by comparing the simulation results and the experiment results（both the spring force and the deformed profile of the motional cable harness）.In the experiment,a special optical measuring instrument based on binocular vision is developed.The comparison of experimental and simulated results shows that the simulation model can represent the real motional cable harness well,and the spring disturbance force simulation results are precise enough for spring disturbance torque analysis.This study will be helpful to obtain an optimized motional cable harness layout design with small spring disturbance torque.展开更多
Sloshing experiment is crucial to determine the reaction performance of regeneration columns on an offshore floating platform.A novel type of column motion simulating device and a Marine Predator Algorithm-based Slidi...Sloshing experiment is crucial to determine the reaction performance of regeneration columns on an offshore floating platform.A novel type of column motion simulating device and a Marine Predator Algorithm-based Sliding Mode Controller(MPA-SMC)are proposed for such sloshing experiments.The simulator consists of a Stewart platform and a steel framework.The Stewart platform is located at the column's center of gravity(CoG)and supported by the steel framework.The platform's hydraulic servo system is controlled by a sliding mode controller with parameters optimized by MPA to improve robustness and precision.A numerical sloshing experiment is conducted using the proposed device and controller.The results show that the novel motion simulator has lower torque during the column sloshes,and the proposed controller performs better than a well-tuned PID controller in terms of target tracking precision and anti-interference capability.展开更多
To provide a suitable model for AUV simulation and control purposes, a general nonlinear dynamic model including a novel thruster hydrodynamics model was derived. Based on the modeling method, the "AUV-XX" s...To provide a suitable model for AUV simulation and control purposes, a general nonlinear dynamic model including a novel thruster hydrodynamics model was derived. Based on the modeling method, the "AUV-XX" simulation platform was established to carry out fundamental tests on its motion characteristics, stability, and controllability. A motion control strategy consisting of both position and speed control in a horizontal plane was designed for different task assignments of underwater vehicles. Combined control of heave and pitch was adopted to compensate for the reduction of vertical tunnel thrusters when the vehicle is moving at a high speed. An improved S-surface controller based on the capacitor plate model was developed with flexible gain selections made possible by different forms of restricting the error and changing the rate of the error. Simulation results show that the derived general mathematical model together with simulation platform can provide a test bed for fundamental tests of motion control. Additionally, the capacitor plate model S-surface control shows a good performance in guiding the vehicle to achieve the desired position and speed with sufficient accuracy.展开更多
文摘There is proposed an adaptive sliding controller in task space on the base of the linear Newton-Euler dynamic equation of motion platform in a six-DOF flight simulator. The uncertain parameters are divided into two groups： the constant and the time-varying. The controller identifies constant uncertain parameters using nonlinear adaptive controller associated with elimination of the influences of time-varying uncertain parameters and compensation of the external disturbance using sliding control. The results of numerical simulation attest to the capability of this control scheme not only to, with deadly accuracy, identify parameters of motion platform such as load, inertia moments and mass center, but also effectively improve the robustness of the system.
基金Supported by the Scientific and Technological Research Program of Chongqing Municipal Education Commission of China(Grant No.:KJQN202301105,KJQN202101550)Scientific Research Fund of Chongqing University of Technology(grant No.2021ZDZ015)National Nature Science Foundation of China(No.:52205052).
文摘This study investigates the effect of nacelle motions on the rotor performance and drivetrain dynamics of floating offshore wind turbines(FOWTs)through fully coupled aero-hydro-elastic-servo-mooring simulations.Using the National Renewable Energy Laboratory 5 MW monopile-supported offshore wind turbine and the OC4 DeepCwind semisubmersible wind turbine as case studies,the research addresses the complex dynamic responses resulting from the interaction among wind,waves,and turbine structures.Detailed multi-body dynamics models of wind turbines,including drivetrain components,are created within the SIMPACK framework.Meanwhile,the mooring system is modeled using a lumped-mass method.Various operational conditions are simulated through five wind-wave load cases.Results demonstrate that nacelle motions significantly influence rotor speed,thrust,torque,and power output,as well as the dynamic loads on drivetrain components.These findings highlight the need for advanced simulation techniques for the design and optimization of FOWTs to ensure reliable performance and longevity.
基金financially supported by the National Natural Science Foundation of China(Grant No.U1906233)the Central Guidance on Local Science and Technology Development Fund of Shenzhen(Grant No.2021Szvup021)。
文摘Hydrodynamic numerical simulations are used to conduct structural analyses and inform the design of engineered marine structures.In this paper,a hydrodynamic numerical model of“Nanhai Tiaozhan”(NHTZ)FPS platform was established according to its design specifications.The model was assessed with two sets of field monitoring data representing harsh and conventional sea states.The motion responses of the platform according to the measured data and the hydrodynamic simulation were compared by reviewing their statistical characteristics,distributions,and spectrum characteristics.The comparison showed that the hydrodynamic model could correctly simulate the frequency domain characteristics of the motion responses of the platform.However,the simulation underestimated the reciprocating motions of the floating body and the influence of slow drift on the motion of the platform.Meanwhile,analysis of the monitoring data revealed that the translational degrees of freedom(DOF)and rotational DOF of the platform were coupled,but these coupled motion states were not apparent in the hydrodynamic simulation.
基金supported by National Natural Science Foundation of China (Grant No. 50805009)
文摘The motional payloads on stabilized platform must be linked by some cable harnesses with other immobile apparatus.During the operation of stabilized platform,these cable harnesses can create spring disturbance torque which is exerted on the stabilized platform and then reduce the stabilizing precision.None of current studies can deal with the spring disturbance torque problem.To analyze the spring disturbance toque,a dynamic thin rod model is presented for simulating the motional cable harness which is based on the Kirchhoff rod theorem and can consider the geometrically non-linear effects.The internal bending and torsion restoring torques are simulated and then a predictive analysis of the disturbance torque can be performed in motional cable routing design.This model is solved with differential quadrature method（DQM）.By using zeros of the Chebyshev polynomial as the grid points,the arc-coordinate is discretized to obtain a set of ordinary differential equations in time domain which is solved by implied method to obtain the profile and internal force of cable harness.The accuracy of this model is validated by comparing the simulation results and the experiment results（both the spring force and the deformed profile of the motional cable harness）.In the experiment,a special optical measuring instrument based on binocular vision is developed.The comparison of experimental and simulated results shows that the simulation model can represent the real motional cable harness well,and the spring disturbance force simulation results are precise enough for spring disturbance torque analysis.This study will be helpful to obtain an optimized motional cable harness layout design with small spring disturbance torque.
文摘Sloshing experiment is crucial to determine the reaction performance of regeneration columns on an offshore floating platform.A novel type of column motion simulating device and a Marine Predator Algorithm-based Sliding Mode Controller(MPA-SMC)are proposed for such sloshing experiments.The simulator consists of a Stewart platform and a steel framework.The Stewart platform is located at the column's center of gravity(CoG)and supported by the steel framework.The platform's hydraulic servo system is controlled by a sliding mode controller with parameters optimized by MPA to improve robustness and precision.A numerical sloshing experiment is conducted using the proposed device and controller.The results show that the novel motion simulator has lower torque during the column sloshes,and the proposed controller performs better than a well-tuned PID controller in terms of target tracking precision and anti-interference capability.
基金the National Science Foundation under Grant No.50879014,No.50909025
文摘To provide a suitable model for AUV simulation and control purposes, a general nonlinear dynamic model including a novel thruster hydrodynamics model was derived. Based on the modeling method, the "AUV-XX" simulation platform was established to carry out fundamental tests on its motion characteristics, stability, and controllability. A motion control strategy consisting of both position and speed control in a horizontal plane was designed for different task assignments of underwater vehicles. Combined control of heave and pitch was adopted to compensate for the reduction of vertical tunnel thrusters when the vehicle is moving at a high speed. An improved S-surface controller based on the capacitor plate model was developed with flexible gain selections made possible by different forms of restricting the error and changing the rate of the error. Simulation results show that the derived general mathematical model together with simulation platform can provide a test bed for fundamental tests of motion control. Additionally, the capacitor plate model S-surface control shows a good performance in guiding the vehicle to achieve the desired position and speed with sufficient accuracy.
