The Daocheng site is one of the three candidate sites for the Large Optical/infrared Telescope(LOT)of China.It was discovered by Yunnan Observatories during the survey of potential sites for the next-generation large-...The Daocheng site is one of the three candidate sites for the Large Optical/infrared Telescope(LOT)of China.It was discovered by Yunnan Observatories during the survey of potential sites for the next-generation large-aperture solar telescopes of China.This paper describes the overview of the site,the observation platform and the monitor instrument.In addition,simple statistical results are presented(from November,2016 up to December,2017).Detailed data results can refer to the overview of LOT site testing and data analysis articles,which were published during the same period.展开更多
The catalytic conversion of CO_(2) to fuels or chemicals is considered to be an effective pathway to mitigate the greenhouse effect. To develop new types of efficient and durable catalysts, it is critical to identify ...The catalytic conversion of CO_(2) to fuels or chemicals is considered to be an effective pathway to mitigate the greenhouse effect. To develop new types of efficient and durable catalysts, it is critical to identify the catalytic active sites, surface intermediates, and reaction mechanisms to reveal the relationship between the active sites and catalytic performance. However, the structure of a heterogeneous catalyst usually dynamically changes during reaction, bringing a great challenge for the identification of catalytic active sites and reaction pathways. Therefore, in-situ/operando techniques have been employed to real-time monitor the dynamic evolution of the structure of active sites under actual reaction conditions to precisely build the structure–function relationship. Here, we review the recent progress in the application of various in-situ/operando techniques in identifying active sites for catalytic conversion of CO_(2) over heterogeneous catalysts. We systematically summarize the applications of various optical and X-ray spectroscopy techniques, including Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and X-ray absorption spectroscopy (XAS), in identifying active sites and determining reaction mechanisms of the CO_(2) thermochemical conversion with hydrogen and light alkanes over heterogeneous catalysts. Finally, we discuss challenges and opportunities for the development of in-situ characterization in the future to further enlarge the capability of these powerful techniques.展开更多
The Large Optical/infrared Telescope(LOT)is a ground-based 12 m diameter telescope which is proposed to be built in western China.The site selection for LOT in China began in 2016,and Ali was listed as one of the thre...The Large Optical/infrared Telescope(LOT)is a ground-based 12 m diameter telescope which is proposed to be built in western China.The site selection for LOT in China began in 2016,and Ali was listed as one of the three candidate sites.Remote studies and local surveys have been carried out for more than 15 years in western China,and the results show that Ali is a promising site with comprehensive quality in terms of atmospheric and supporting conditions.An overview of the site testing campaign at the Ali site from 2016 to 2019 is presented.After the two years of data collection,the overall median seeing value is found to be 1.17 arcsec,the observable nights are 81.71%and the good observable nights are 71.76%.The weather conditions as follows,the median night temperature value is-5.18℃,the median night relative humidity value is 41.25%,the median night atmospheric pressure value is 540.92 hPa,the median night wind speed value is 7.41 m s-1 and the mainly wind direction is southwestern(SW).The median night sky background value is 22.07 magV.We also discuss the wind speed at different locations on-site,the possibility of light pollution and the effect of wind speed on differential image motion monitor(DIMM)seeing measurements.展开更多
Electrocatalytic oxygen reduction reaction(ORR)is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal–O2/air batteries,etc.However,the essential catalysts to overco...Electrocatalytic oxygen reduction reaction(ORR)is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal–O2/air batteries,etc.However,the essential catalysts to overcome its slow reaction kinetic always undergo a complex dynamic evolution in the actual catalytic process,and the concomitant intermediates and catalytic products also occur continuous conversion and reconstruction.This makes them difficult to be accurately captured,making the identification of ORR active sites and the elucidation of ORR mechanisms difficult.Thus,it is necessary to use extensive in-situ characterization techniques to proceed the real-time monitoring of the catalyst structure and the evolution state of intermediates and products during ORR.This work reviews the major advances in the use of various in-situ techniques to characterize the catalytic processes of various catalysts.Specifically,the catalyst structure evolutions revealed directly by in-situ techniques are systematically summarized,such as phase,valence,electronic transfer,coordination,and spin states varies.In-situ revelation of intermediate adsorption/desorption behavior,and the real-time monitoring of the product nucleation,growth,and reconstruction evolution are equally emphasized in the discussion.Other interference factors,as well as in-situ signal assignment with the aid of theoretical calculations,are also covered.Finally,some major challenges and prospects of in-situ techniques for future catalysts research in the ORR process are proposed.展开更多
The Large Optical/infrared Telescope(LOT)is a ground-based 12 m diameter optical/infrared telescope which is proposed to be built in the western part of China in the next decade.Based on satellite remote sensing data,...The Large Optical/infrared Telescope(LOT)is a ground-based 12 m diameter optical/infrared telescope which is proposed to be built in the western part of China in the next decade.Based on satellite remote sensing data,along with geographical,logistical and political considerations,three candidate sites were chosen for ground-based astronomical performance monitoring.These sites include:Ali in Tibet,Daocheng in Sichuan and Muztagh-ata in Xinjiang.Up until now,all three sites have continuously collected data for two years.In this paper,we will introduce this site testing campaign,and present its monitoring results obtained during the period between March 2017 and March 2019.展开更多
Selecting a good site for ground-based astronomy is very important. Based on the ERA-Interim global reanalysis data, this paper studied the atmospheric conditions of the Qitai Telescope(QTT) site from the aspects of a...Selecting a good site for ground-based astronomy is very important. Based on the ERA-Interim global reanalysis data, this paper studied the atmospheric conditions of the Qitai Telescope(QTT) site from the aspects of absolute humidity, mixing ratio and precipitable water vapor(PWV). Error estimations of meteorological parameters are also analyzed. These primary results show that the QTT site has obvious advantages in terms of conditions with much less atmospheric water vapor than two well-known existing sites with 100-meter-aperture radio telescopes in the world. In addition, due to the influence of atmospheric water vapor on radio observations, the atmospheric transmittance for each frequency band of the site are simulated, and the atmospheric opacity is also calculated as well as Planck radiation brightness. Based on these results, the effective observational time of different bands is further estimated.展开更多
Big Data is reforming many industrial domains by providing decision support through analyzing large data volumes.Big Data testing aims to ensure that Big Data systems run smoothly and error-free while maintaining the ...Big Data is reforming many industrial domains by providing decision support through analyzing large data volumes.Big Data testing aims to ensure that Big Data systems run smoothly and error-free while maintaining the performance and quality of data.However,because of the diversity and complexity of data,testing Big Data is challenging.Though numerous research efforts deal with Big Data testing,a comprehensive review to address testing techniques and challenges of BigData is not available as yet.Therefore,we have systematically reviewed the Big Data testing techniques’evidence occurring in the period 2010–2021.This paper discusses testing data processing by highlighting the techniques used in every processing phase.Furthermore,we discuss the challenges and future directions.Our findings show that diverse functional,non-functional and combined(functional and non-functional)testing techniques have been used to solve specific problems related to Big Data.At the same time,most of the testing challenges have been faced during the MapReduce validation phase.In addition,the combinatorial testing technique is one of the most applied techniques in combination with other techniques(i.e.,random testing,mutation testing,input space partitioning and equivalence testing)to find various functional faults through Big Data testing.展开更多
The work on the site testing at the Gaomeigu village Lijiang county in the northwest of Yunnan Province, was started in 1994 after the completion of the investigation on optical/infrared astronomical observatory site ...The work on the site testing at the Gaomeigu village Lijiang county in the northwest of Yunnan Province, was started in 1994 after the completion of the investigation on optical/infrared astronomical observatory site resources over Yunnan Province. The observation of the astro climate conditons has been made for more than two years. The major results are given as follows: The photometrical nights are 75, the half photometrical nights 39, the spectroscopic nights 99 5. the average of the temperature difference during night is 3 2℃, the average of the winding speed 3 6m/s, the precipitable water vapor at night is 13.0mm in the raining season and 4.3mm in the dry season respectively. The seeing measurement was made by a three subaperture DIMM. 20486 sets data obtained for 294 nights. The average of the Fried parameter is 15.53cm (FWHM=0.″71). The micro temperature sensors were used to determine the atmospheric turbulence distribution near the ground from 6 5cm to 27m. The typical value is about 0.″11 at night. The sky brightness and the extinction coefficient in B.V. colors was measured by a photometer. The means of the sky brightness B=22 m 34/◇″ and V=21 m.54/◇″. The extinction coefficients K′ v=0.135 and K′ bv =0.298.展开更多
Catalysts can significantly promote the reaction dynamics and are therefore considered crucial components for achieving high electrochemical energy conversion efficiency.However,the active sites of the catalysts,parti...Catalysts can significantly promote the reaction dynamics and are therefore considered crucial components for achieving high electrochemical energy conversion efficiency.However,the active sites of the catalysts,particularly for nano-level and atomic-level catalysts commonly undergo reconstruction under practical applications.Therefore,obtaining an in-depth and systematic understanding on the real active sites through in situ/operando characterization techniques is a prerequisite for establishing the structureperformance relationship and guiding the future design of more efficient electrocatalysts.Herein,we summarize the recent progress of in situ/operando characterization techniques for identifying the nature of active sites of electrocatalysts when used in electrocatalytic energy conversion reaction.Specifically,our focus lies in the fundamental principles of various in situ/operando characterization techniques,with particular emphasis on their applications for electrocatalytic reactions.Beyond that,the challenges and perspective insights are also added in the final section to highlight the future direction of this important field.展开更多
In this paper we present some of our recent results on applications of spectral techniques over finite fields to the problems of testing and diagnosis of computer systems.
In this article,we present a detailed analysis of the statistical properties of seeing for the Muztaghata site which is a candidate site for hosting the future Chinese Large Optical/infrared Telescope(LOT)project.The ...In this article,we present a detailed analysis of the statistical properties of seeing for the Muztaghata site which is a candidate site for hosting the future Chinese Large Optical/infrared Telescope(LOT)project.The measurements were obtained with differential image motion monitors(DIMMs)from April2017 to November 2018 at different heights during different periods.The median seeings at 11 m and6 m are very close but significantly different from that on the ground.We mainly analyzed the seeing at11 m monthly and hourly,having found that the best season for observing was from late autumn to early winter and seeing tended to improve during the night only in autumn.The analysis of the dependence on temperature inversion,wind speed and direction also was made and the best meteorological conditions for seeing are given.展开更多
According to different testing purposes, methods and available environmental conditions, the seismograph testing can be divided into laboratory and on-site testing, respectively. The testing of the seismograph's k...According to different testing purposes, methods and available environmental conditions, the seismograph testing can be divided into laboratory and on-site testing, respectively. The testing of the seismograph's key parameters and other concerning technical specifications are well described in guide documents(China Earthquake Administration, 2017). This includes seismometer sensitivity, linearity and clip levels based on the shake table test, as well as the seismometer natural period, damping constant based on electrical calibration(Wang Guangfu,1986; Ple?inger A.,1993) and instrumental self-noise collocation estimation(Holcomb L.G., 1989; Sleeman R. et al., 2006). However, with the development of seismic observation technology, many new requirements for the performance evaluation of seismographs have been put forward, and new testing items and methods have emerged.展开更多
The uniaxial compressive strength(UCS)of rock is an essential property of rock material in different relevant applications,such as rock slope,tunnel construction,and foundation.It takes enormous time and effort to obt...The uniaxial compressive strength(UCS)of rock is an essential property of rock material in different relevant applications,such as rock slope,tunnel construction,and foundation.It takes enormous time and effort to obtain the UCS values directly in the laboratory.Accordingly,an indirect determination of UCS through conducting several rock index tests that are easy and fast to carry out is of interest and importance.This study presents powerful boosting trees evaluation framework,i.e.,adaptive boosting machine,extreme gradient boosting machine(XGBoost),and category gradient boosting machine,for estimating the UCS of sandstone.Schmidt hammer rebound number,P-wave velocity,and point load index were chosen as considered factors to forecast UCS values of sandstone samples.Taylor diagrams and five regression metrics,including coefficient of determination(R2),root mean square error,mean absolute error,variance account for,and A-20 index,were used to evaluate and compare the performance of these boosting trees.The results showed that the proposed boosting trees are able to provide a high level of prediction capacity for the prepared database.In particular,itwas worth noting that XGBoost is the best model to predict sandstone strength and it achieved 0.999 training R^(2) and 0.958 testing R^(2).The proposed model had more outstanding capability than neural network with optimization techniques during training and testing phases.The performed variable importance analysis reveals that the point load index has a significant influence on predicting UCS of sandstone.展开更多
Side channel attack may result in user key leakage as scan test techniques are applied for crypto-graphic chips. Many secure scan designs have been proposed to protect the user key. This paper meticulously selects thr...Side channel attack may result in user key leakage as scan test techniques are applied for crypto-graphic chips. Many secure scan designs have been proposed to protect the user key. This paper meticulously selects three current scan test techniques, analyses their advantages and disadvantages and also compares them in security and area overhead. Users can choose one of them according to the requirements and further combination can be implemented to achieve better performance.展开更多
Effective prevention and management of osteoporosis would require suitable methods for population screenings and early diagnosis. Current clinicallyavailable diagnostic methods are mainly based on the use of either X-...Effective prevention and management of osteoporosis would require suitable methods for population screenings and early diagnosis. Current clinicallyavailable diagnostic methods are mainly based on the use of either X-rays or ultrasound(US). All X-ray based methods provide a measure of bone mineral density(BMD), but it has been demonstrated that other structural aspects of the bone are important in determining fracture risk, such as mechanical features and elastic properties, which cannot be assessed using densitometric techniques. Among the most commonly used techniques, dual X-ray absorptiometry(DXA) is considered the current 'gold standard' for osteoporosis diagnosis and fracture risk prediction. Unfortunately, as other X-ray based techniques, DXA has specific limitations(e.g., use of ionizing radiation, large size of the equipment, high costs, limited availability) that hinder its application for population screenings and primary care diagnosis. This has resulted in an increasing interest in developing reliable pre-screening tools for osteoporosis such as quantitative ultrasound(QUS) scanners, which do not involve ionizing radiation exposure and represent a cheaper solution exploiting portable and widely available devices. Furthermore, the usefulness of QUS techniques in fracture risk prediction has been proven and, with the last developments, they are also becoming a more and more reliable approach for assessing bone quality. However, the US assessment of osteoporosis is currently used only as a pre-screening tool, requiring a subsequent diagnosis confirmation by means of a DXA evaluation. Here we illustrate the state of art in the early diagnosis of this 'silent disease' and show up recent advances for its prevention and improved management through early diagnosis.展开更多
Delivered by intramuscular (IM) injections, Long Acting Injections (LAI), offering comparatively long term medicinal effects from several weeks to several months, are gaining much attention. The aim of this article wa...Delivered by intramuscular (IM) injections, Long Acting Injections (LAI), offering comparatively long term medicinal effects from several weeks to several months, are gaining much attention. The aim of this article was to indicate a safe and effective IM injection technique based on evidenced data derived from ultrasonographic data. Accurate anatomical knowledge is necessary in order to administer IM injections. It is possible to gain an adequate understanding of injection site anatomical structures by using ultrasound diagnostic devices. In particular, ultrasonography offers real-time diagnostic data allowing for observation of injection site, subcutaneous tissues, fat layers, muscle membrane, muscles and bones. To deliver the drug accurately into the muscle is essential, to achieve maximum drug efficacy and prevent injection site reactions. Therefore, when administering IM injections to the buttocks area, a suitable injection needle between 23G 25 mm to 21G or 22G 38 mm must be chosen depending on physique and drug characteristics. Needles determined as safe and effective through ultrasonographic evidence are needed such as in the case of a deltoid injection site, in which a 23G 25 mm injection needle is used in the absence of notable obesity. Not only the needle type is essential, but also the IM procedure itself. It is important to stretch the skin, inserting the needle at 90 degree angle to ensure depth of needle insertion to the muscle. Until new con-firmed evidence becomes available, it is necessary to increase the understanding of injection site selection methods, needle insertion depth, needle angle, and established IM injection techniques. The application of ultrasound devices in the development of next-generation techniques for IM injection is promising. Importantly, these techniques provide critical information from a risk management perspective.展开更多
Astronomical site selection work is very hard.Unmanned technologies are important trends and solutions.We present a relatively easy method to plan a high reliability site selection which can extend the time from site ...Astronomical site selection work is very hard.Unmanned technologies are important trends and solutions.We present a relatively easy method to plan a high reliability site selection which can extend the time from site deployment to returning for maintaining by unmanned confirming the site.First,we redefine the reliability of a site selection deployment with the parameter of the trusty time,which means when we must return,and which can be relatively easy for estimating.The redefinition makes the reliability parameter as a Bayesian probability,and can be obtained by estimating besides testing,which makes the evaluation of each device's reliability much easier.Then we use block diagram tools in the Matlab Simulink software to construct structure diagram,and to link each component with relations of parallel,serial,protection,and so on.This makes the whole reliability value can be calculated at the time when we design or plan a site selection.We applied this concept and method in an actual site selection in Lenghu,Qinghai Province,China.The survey practice reveals its effectiveness and simpleness.展开更多
With the depletion of fossil fuels and increasing environmental concerns,the development of renewable energy,such as wave energy,has become a critical component of global energy strategies.However,challenges persist i...With the depletion of fossil fuels and increasing environmental concerns,the development of renewable energy,such as wave energy,has become a critical component of global energy strategies.However,challenges persist in the field testing methodologies for wave energy converters(WECs).In this paper,a numerical wave field of the Dawanshan Island Sea Area in Zhuhai City is constructed based on the MIKE21 SW wave model and by using an NCEP wind field driving model.In conjunction with the IEC-62600-100 standard,by taking site testing of the“Wanshan”wave energy converter on which a sea trial has been conducted in Dawanshan Island of Zhuhai city as an example,research on-site testing method for a wave energy converter has been carried out.The wave measurement position for the“Wanshan”converter was determined by combining statistically analyzed field data with a validated numerical wave model.By comparing a valid wave height at the position where a wave rider is located with a valid wave height at the position where the“Wanshan”wave energy converter is situated,the correlation coefficient between simulation and observed data reached 0.90,with a root-mean-square error of 0.19.The representativeness of wave measurement data during site testing is verified and can be used as a basis for calculating the input energy of the“Wanshan”wave energy converter.展开更多
基金Fund for Astronomical Telescopes and Facility Instrumentsbudgeted from the Ministry of Finance of China(MOF)and administrated by the Chinese Academy of Sciences(CAS)+3 种基金supported by the National Natural Science Foundation of China(Grant Nos.11873092,11533009 and 11503084)the Science and Technology Development FundMacao SAR(File No.0002/2019/APD)the One Belt and One Road project of the West Light Foundation,Chinese Academy of Sciences。
文摘The Daocheng site is one of the three candidate sites for the Large Optical/infrared Telescope(LOT)of China.It was discovered by Yunnan Observatories during the survey of potential sites for the next-generation large-aperture solar telescopes of China.This paper describes the overview of the site,the observation platform and the monitor instrument.In addition,simple statistical results are presented(from November,2016 up to December,2017).Detailed data results can refer to the overview of LOT site testing and data analysis articles,which were published during the same period.
基金Authors acknowledge the financial support from the National Natural Science Foundation of China(NSFC)under Grant No.21978148 and 21808120.
文摘The catalytic conversion of CO_(2) to fuels or chemicals is considered to be an effective pathway to mitigate the greenhouse effect. To develop new types of efficient and durable catalysts, it is critical to identify the catalytic active sites, surface intermediates, and reaction mechanisms to reveal the relationship between the active sites and catalytic performance. However, the structure of a heterogeneous catalyst usually dynamically changes during reaction, bringing a great challenge for the identification of catalytic active sites and reaction pathways. Therefore, in-situ/operando techniques have been employed to real-time monitor the dynamic evolution of the structure of active sites under actual reaction conditions to precisely build the structure–function relationship. Here, we review the recent progress in the application of various in-situ/operando techniques in identifying active sites for catalytic conversion of CO_(2) over heterogeneous catalysts. We systematically summarize the applications of various optical and X-ray spectroscopy techniques, including Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and X-ray absorption spectroscopy (XAS), in identifying active sites and determining reaction mechanisms of the CO_(2) thermochemical conversion with hydrogen and light alkanes over heterogeneous catalysts. Finally, we discuss challenges and opportunities for the development of in-situ characterization in the future to further enlarge the capability of these powerful techniques.
基金funded by the National Natural Science Foundation of China(NSFC,Grant Nos.11873063 and 11373043)supported by the Operation,Maintenance and Upgrading Fund for Astronomical Telescopes and Facility Instruments,budgeted from the Ministry of Finance of China(MOF)and administrated by CASsupported by the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB23020300)。
文摘The Large Optical/infrared Telescope(LOT)is a ground-based 12 m diameter telescope which is proposed to be built in western China.The site selection for LOT in China began in 2016,and Ali was listed as one of the three candidate sites.Remote studies and local surveys have been carried out for more than 15 years in western China,and the results show that Ali is a promising site with comprehensive quality in terms of atmospheric and supporting conditions.An overview of the site testing campaign at the Ali site from 2016 to 2019 is presented.After the two years of data collection,the overall median seeing value is found to be 1.17 arcsec,the observable nights are 81.71%and the good observable nights are 71.76%.The weather conditions as follows,the median night temperature value is-5.18℃,the median night relative humidity value is 41.25%,the median night atmospheric pressure value is 540.92 hPa,the median night wind speed value is 7.41 m s-1 and the mainly wind direction is southwestern(SW).The median night sky background value is 22.07 magV.We also discuss the wind speed at different locations on-site,the possibility of light pollution and the effect of wind speed on differential image motion monitor(DIMM)seeing measurements.
基金the National Natural Science Foundation of China(No.52072256)Shanxi Science and Technology Major Project(No.20201101016)+1 种基金Key R&D program of Shanxi Province(No.202102030201006)Research Project Supported by Shanxi Scholarship Council of China(HGKY2019031).
文摘Electrocatalytic oxygen reduction reaction(ORR)is one of the most important reactions in electrochemical energy technologies such as fuel cells and metal–O2/air batteries,etc.However,the essential catalysts to overcome its slow reaction kinetic always undergo a complex dynamic evolution in the actual catalytic process,and the concomitant intermediates and catalytic products also occur continuous conversion and reconstruction.This makes them difficult to be accurately captured,making the identification of ORR active sites and the elucidation of ORR mechanisms difficult.Thus,it is necessary to use extensive in-situ characterization techniques to proceed the real-time monitoring of the catalyst structure and the evolution state of intermediates and products during ORR.This work reviews the major advances in the use of various in-situ techniques to characterize the catalytic processes of various catalysts.Specifically,the catalyst structure evolutions revealed directly by in-situ techniques are systematically summarized,such as phase,valence,electronic transfer,coordination,and spin states varies.In-situ revelation of intermediate adsorption/desorption behavior,and the real-time monitoring of the product nucleation,growth,and reconstruction evolution are equally emphasized in the discussion.Other interference factors,as well as in-situ signal assignment with the aid of theoretical calculations,are also covered.Finally,some major challenges and prospects of in-situ techniques for future catalysts research in the ORR process are proposed.
基金supported by the Operation,Maintenance and Upgrading Fund for Astronomical Telescopes and Facility Instruments,budgeted from the Ministry of Finance of China(MOF)and administered by the Chinese Academy of Sciences(CAS)supported by the National Natural Science Foundation of China(Grant No.11873081)。
文摘The Large Optical/infrared Telescope(LOT)is a ground-based 12 m diameter optical/infrared telescope which is proposed to be built in the western part of China in the next decade.Based on satellite remote sensing data,along with geographical,logistical and political considerations,three candidate sites were chosen for ground-based astronomical performance monitoring.These sites include:Ali in Tibet,Daocheng in Sichuan and Muztagh-ata in Xinjiang.Up until now,all three sites have continuously collected data for two years.In this paper,we will introduce this site testing campaign,and present its monitoring results obtained during the period between March 2017 and March 2019.
文摘Selecting a good site for ground-based astronomy is very important. Based on the ERA-Interim global reanalysis data, this paper studied the atmospheric conditions of the Qitai Telescope(QTT) site from the aspects of absolute humidity, mixing ratio and precipitable water vapor(PWV). Error estimations of meteorological parameters are also analyzed. These primary results show that the QTT site has obvious advantages in terms of conditions with much less atmospheric water vapor than two well-known existing sites with 100-meter-aperture radio telescopes in the world. In addition, due to the influence of atmospheric water vapor on radio observations, the atmospheric transmittance for each frequency band of the site are simulated, and the atmospheric opacity is also calculated as well as Planck radiation brightness. Based on these results, the effective observational time of different bands is further estimated.
基金Science Foundation Ireland(SFI)under Grant Number SFI/16/RC/3918(Confirm)and Marie Sklodowska Curie Grant agreement No.847577 co-fundedthe European Regional Development Fund.Wasif Afzal has received funding from the European Union’s Horizon 2020 research and innovation program under CMC,2023,vol.74,no.22767 Grant agreement Nos.871319,957212from the ECSEL Joint Undertaking(JU)under Grant agreement No 101007350.
文摘Big Data is reforming many industrial domains by providing decision support through analyzing large data volumes.Big Data testing aims to ensure that Big Data systems run smoothly and error-free while maintaining the performance and quality of data.However,because of the diversity and complexity of data,testing Big Data is challenging.Though numerous research efforts deal with Big Data testing,a comprehensive review to address testing techniques and challenges of BigData is not available as yet.Therefore,we have systematically reviewed the Big Data testing techniques’evidence occurring in the period 2010–2021.This paper discusses testing data processing by highlighting the techniques used in every processing phase.Furthermore,we discuss the challenges and future directions.Our findings show that diverse functional,non-functional and combined(functional and non-functional)testing techniques have been used to solve specific problems related to Big Data.At the same time,most of the testing challenges have been faced during the MapReduce validation phase.In addition,the combinatorial testing technique is one of the most applied techniques in combination with other techniques(i.e.,random testing,mutation testing,input space partitioning and equivalence testing)to find various functional faults through Big Data testing.
文摘The work on the site testing at the Gaomeigu village Lijiang county in the northwest of Yunnan Province, was started in 1994 after the completion of the investigation on optical/infrared astronomical observatory site resources over Yunnan Province. The observation of the astro climate conditons has been made for more than two years. The major results are given as follows: The photometrical nights are 75, the half photometrical nights 39, the spectroscopic nights 99 5. the average of the temperature difference during night is 3 2℃, the average of the winding speed 3 6m/s, the precipitable water vapor at night is 13.0mm in the raining season and 4.3mm in the dry season respectively. The seeing measurement was made by a three subaperture DIMM. 20486 sets data obtained for 294 nights. The average of the Fried parameter is 15.53cm (FWHM=0.″71). The micro temperature sensors were used to determine the atmospheric turbulence distribution near the ground from 6 5cm to 27m. The typical value is about 0.″11 at night. The sky brightness and the extinction coefficient in B.V. colors was measured by a photometer. The means of the sky brightness B=22 m 34/◇″ and V=21 m.54/◇″. The extinction coefficients K′ v=0.135 and K′ bv =0.298.
基金financed by the National Natural Science Foundation of China(No.22202169)Xuzhou Science and Technology Plan Project of China(No.KC21294)。
文摘Catalysts can significantly promote the reaction dynamics and are therefore considered crucial components for achieving high electrochemical energy conversion efficiency.However,the active sites of the catalysts,particularly for nano-level and atomic-level catalysts commonly undergo reconstruction under practical applications.Therefore,obtaining an in-depth and systematic understanding on the real active sites through in situ/operando characterization techniques is a prerequisite for establishing the structureperformance relationship and guiding the future design of more efficient electrocatalysts.Herein,we summarize the recent progress of in situ/operando characterization techniques for identifying the nature of active sites of electrocatalysts when used in electrocatalytic energy conversion reaction.Specifically,our focus lies in the fundamental principles of various in situ/operando characterization techniques,with particular emphasis on their applications for electrocatalytic reactions.Beyond that,the challenges and perspective insights are also added in the final section to highlight the future direction of this important field.
基金This work was supported by the National Science Foundation(USA)under grant MIP 9630096the NATO under Grant 910411Volkswagen Foundation(Germany)
文摘In this paper we present some of our recent results on applications of spectral techniques over finite fields to the problems of testing and diagnosis of computer systems.
基金supported by theNational Nature Science Foundation of China(Grant Nos.11873081 and 11603065)the Operation,Maintenance and Upgrading Fund for Astronomical Telescopes and Facility Instruments,budgeted from the Ministry of Finance of China(MOF)and administered by the Chinese Academy of Sciences。
文摘In this article,we present a detailed analysis of the statistical properties of seeing for the Muztaghata site which is a candidate site for hosting the future Chinese Large Optical/infrared Telescope(LOT)project.The measurements were obtained with differential image motion monitors(DIMMs)from April2017 to November 2018 at different heights during different periods.The median seeings at 11 m and6 m are very close but significantly different from that on the ground.We mainly analyzed the seeing at11 m monthly and hourly,having found that the best season for observing was from late autumn to early winter and seeing tended to improve during the night only in autumn.The analysis of the dependence on temperature inversion,wind speed and direction also was made and the best meteorological conditions for seeing are given.
基金sponsored by the Department of Earthquake Monitoring and Prediction,China Earthquake Administration
文摘According to different testing purposes, methods and available environmental conditions, the seismograph testing can be divided into laboratory and on-site testing, respectively. The testing of the seismograph's key parameters and other concerning technical specifications are well described in guide documents(China Earthquake Administration, 2017). This includes seismometer sensitivity, linearity and clip levels based on the shake table test, as well as the seismometer natural period, damping constant based on electrical calibration(Wang Guangfu,1986; Ple?inger A.,1993) and instrumental self-noise collocation estimation(Holcomb L.G., 1989; Sleeman R. et al., 2006). However, with the development of seismic observation technology, many new requirements for the performance evaluation of seismographs have been put forward, and new testing items and methods have emerged.
基金funded by Act 211 Government of the Russian Federation,Contract No.02.A03.21.0011.
文摘The uniaxial compressive strength(UCS)of rock is an essential property of rock material in different relevant applications,such as rock slope,tunnel construction,and foundation.It takes enormous time and effort to obtain the UCS values directly in the laboratory.Accordingly,an indirect determination of UCS through conducting several rock index tests that are easy and fast to carry out is of interest and importance.This study presents powerful boosting trees evaluation framework,i.e.,adaptive boosting machine,extreme gradient boosting machine(XGBoost),and category gradient boosting machine,for estimating the UCS of sandstone.Schmidt hammer rebound number,P-wave velocity,and point load index were chosen as considered factors to forecast UCS values of sandstone samples.Taylor diagrams and five regression metrics,including coefficient of determination(R2),root mean square error,mean absolute error,variance account for,and A-20 index,were used to evaluate and compare the performance of these boosting trees.The results showed that the proposed boosting trees are able to provide a high level of prediction capacity for the prepared database.In particular,itwas worth noting that XGBoost is the best model to predict sandstone strength and it achieved 0.999 training R^(2) and 0.958 testing R^(2).The proposed model had more outstanding capability than neural network with optimization techniques during training and testing phases.The performed variable importance analysis reveals that the point load index has a significant influence on predicting UCS of sandstone.
文摘Side channel attack may result in user key leakage as scan test techniques are applied for crypto-graphic chips. Many secure scan designs have been proposed to protect the user key. This paper meticulously selects three current scan test techniques, analyses their advantages and disadvantages and also compares them in security and area overhead. Users can choose one of them according to the requirements and further combination can be implemented to achieve better performance.
基金Supported by Partially funded by FESR P.O.Apulia Region 2007-2013-Action 1.2.4,No.3Q5AX31
文摘Effective prevention and management of osteoporosis would require suitable methods for population screenings and early diagnosis. Current clinicallyavailable diagnostic methods are mainly based on the use of either X-rays or ultrasound(US). All X-ray based methods provide a measure of bone mineral density(BMD), but it has been demonstrated that other structural aspects of the bone are important in determining fracture risk, such as mechanical features and elastic properties, which cannot be assessed using densitometric techniques. Among the most commonly used techniques, dual X-ray absorptiometry(DXA) is considered the current 'gold standard' for osteoporosis diagnosis and fracture risk prediction. Unfortunately, as other X-ray based techniques, DXA has specific limitations(e.g., use of ionizing radiation, large size of the equipment, high costs, limited availability) that hinder its application for population screenings and primary care diagnosis. This has resulted in an increasing interest in developing reliable pre-screening tools for osteoporosis such as quantitative ultrasound(QUS) scanners, which do not involve ionizing radiation exposure and represent a cheaper solution exploiting portable and widely available devices. Furthermore, the usefulness of QUS techniques in fracture risk prediction has been proven and, with the last developments, they are also becoming a more and more reliable approach for assessing bone quality. However, the US assessment of osteoporosis is currently used only as a pre-screening tool, requiring a subsequent diagnosis confirmation by means of a DXA evaluation. Here we illustrate the state of art in the early diagnosis of this 'silent disease' and show up recent advances for its prevention and improved management through early diagnosis.
文摘Delivered by intramuscular (IM) injections, Long Acting Injections (LAI), offering comparatively long term medicinal effects from several weeks to several months, are gaining much attention. The aim of this article was to indicate a safe and effective IM injection technique based on evidenced data derived from ultrasonographic data. Accurate anatomical knowledge is necessary in order to administer IM injections. It is possible to gain an adequate understanding of injection site anatomical structures by using ultrasound diagnostic devices. In particular, ultrasonography offers real-time diagnostic data allowing for observation of injection site, subcutaneous tissues, fat layers, muscle membrane, muscles and bones. To deliver the drug accurately into the muscle is essential, to achieve maximum drug efficacy and prevent injection site reactions. Therefore, when administering IM injections to the buttocks area, a suitable injection needle between 23G 25 mm to 21G or 22G 38 mm must be chosen depending on physique and drug characteristics. Needles determined as safe and effective through ultrasonographic evidence are needed such as in the case of a deltoid injection site, in which a 23G 25 mm injection needle is used in the absence of notable obesity. Not only the needle type is essential, but also the IM procedure itself. It is important to stretch the skin, inserting the needle at 90 degree angle to ensure depth of needle insertion to the muscle. Until new con-firmed evidence becomes available, it is necessary to increase the understanding of injection site selection methods, needle insertion depth, needle angle, and established IM injection techniques. The application of ultrasound devices in the development of next-generation techniques for IM injection is promising. Importantly, these techniques provide critical information from a risk management perspective.
基金supported by the Investigation of Technological Infrastructure Resources(No.2023FY101101)the National Natural Science Foundation of China(NSFC)(No.11073027 and No.12373104)。
文摘Astronomical site selection work is very hard.Unmanned technologies are important trends and solutions.We present a relatively easy method to plan a high reliability site selection which can extend the time from site deployment to returning for maintaining by unmanned confirming the site.First,we redefine the reliability of a site selection deployment with the parameter of the trusty time,which means when we must return,and which can be relatively easy for estimating.The redefinition makes the reliability parameter as a Bayesian probability,and can be obtained by estimating besides testing,which makes the evaluation of each device's reliability much easier.Then we use block diagram tools in the Matlab Simulink software to construct structure diagram,and to link each component with relations of parallel,serial,protection,and so on.This makes the whole reliability value can be calculated at the time when we design or plan a site selection.We applied this concept and method in an actual site selection in Lenghu,Qinghai Province,China.The survey practice reveals its effectiveness and simpleness.
基金supported by the“National Ocean Technology Center Innovation Fund”under Project No.N3220Z002,led by Ning Jia.The official website of the National Ocean Technology Center is accessible at:http://www.notcsoa.org.cn/.
文摘With the depletion of fossil fuels and increasing environmental concerns,the development of renewable energy,such as wave energy,has become a critical component of global energy strategies.However,challenges persist in the field testing methodologies for wave energy converters(WECs).In this paper,a numerical wave field of the Dawanshan Island Sea Area in Zhuhai City is constructed based on the MIKE21 SW wave model and by using an NCEP wind field driving model.In conjunction with the IEC-62600-100 standard,by taking site testing of the“Wanshan”wave energy converter on which a sea trial has been conducted in Dawanshan Island of Zhuhai city as an example,research on-site testing method for a wave energy converter has been carried out.The wave measurement position for the“Wanshan”converter was determined by combining statistically analyzed field data with a validated numerical wave model.By comparing a valid wave height at the position where a wave rider is located with a valid wave height at the position where the“Wanshan”wave energy converter is situated,the correlation coefficient between simulation and observed data reached 0.90,with a root-mean-square error of 0.19.The representativeness of wave measurement data during site testing is verified and can be used as a basis for calculating the input energy of the“Wanshan”wave energy converter.
