Radiative cooling textiles with spectrally selective surfaces offer a promising energy-efficient approach for sub-ambient cooling of outdoor objects and individuals.However,the spectrally selective mid-infrared emissi...Radiative cooling textiles with spectrally selective surfaces offer a promising energy-efficient approach for sub-ambient cooling of outdoor objects and individuals.However,the spectrally selective mid-infrared emission of these textiles significantly hinders their efficient radiative heat exchange with self-heated objects,thereby posing a significant challenge to their versatile cooling applicability.Herein,we present a bicomponent blow spinning strategy for the production of scalable,ultra-flexible,and healable textiles featuring a tailored dual gradient in both chemical composition and fiber diameter.The gradient in the fiber diameter of this textile introduces a hierarchically porous structure across the sunlight incident area,thereby achieving a competitive solar reflectivity of 98.7%on its outer surface.Additionally,the gradient in the chemical composition of this textile contributes to the formation of Janus infrared-absorbing surfaces:The outer surface demonstrates a high mid-infrared emission,whereas the inner surface shows a broad infrared absorptivity,facilitating radiative heat exchange with underlying self-heated objects.Consequently,this textile demonstrates multi-scenario radiative cooling capabilities,enabling versatile outdoor cooling for unheated objects by 7.8℃ and self-heated objects by 13.6℃,compared to commercial sunshade fabrics.展开更多
An internal state variable(ISV)model was established according to the experimental results of hot plane strain compression(PSC)to predict the microstructure evolution during hot spinning of ZK61 alloy.The effects of t...An internal state variable(ISV)model was established according to the experimental results of hot plane strain compression(PSC)to predict the microstructure evolution during hot spinning of ZK61 alloy.The effects of the internal variables were considered in this ISV model,and the parameters were optimized by genetic algorithm.After validation,the ISV model was used to simulate the evolution of grain size(GS)and dynamic recrystallization(DRX)fraction during hot spinning via Abaqus and its subroutine Vumat.By comparing the simulated results with the experimental results,the application of the ISV model was proven to be reliable.Meanwhile,the strength of the thin-walled spun ZK61 tube increased from 303 to 334 MPa due to grain refinement by DRX and texture strengthening.Besides,some ultrafine grains(0.5μm)that played an important role in mechanical properties were formed due to the proliferation,movement,and entanglement of dislocations during the spinning process.展开更多
Precision,speed and cost efficiency are all indispensable,especially in challenging times.Rieter has put together a powerful portfolio for ITMA ASIA+CITME 2025 that gives spinning mills the chance to actively shape th...Precision,speed and cost efficiency are all indispensable,especially in challenging times.Rieter has put together a powerful portfolio for ITMA ASIA+CITME 2025 that gives spinning mills the chance to actively shape the future through intelligent automation.This is a key milestone on the way to achieving Rieter’s vision 2027-the fully automated spinning mill.展开更多
Fiber fabrics have been wildly utilized for solar interracial evaporators to address freshwater scarcity.However,the complex and expensive manufacturing processes remain limited to their scalable development.Herein,a ...Fiber fabrics have been wildly utilized for solar interracial evaporators to address freshwater scarcity.However,the complex and expensive manufacturing processes remain limited to their scalable development.Herein,a fabric-based Janus interracial evaporator is efficiently fabricated on a large scale by integrating an extremely innovative self-designed melt-centrifugal spinning technology with spray coating technology.The prepared fabric-based Janus interfacial evaporator has differential hydrophilicity,uneven surfaces,and channels that allow moisture escape.Benefiting from the excellent photothermai conversion of graphene oxide and the charge transfer actions of titanium dioxide,such a multifunction evaporator can reach a high evaporation rate of 1.72 kg m^(-2)h^(-1)under 1 sun irradiation,a superior antibacterial rate of 99%,excellent photocatalytic degradation,and effective thermoelectric ability simultaneously.Moreover,it also shows fantastic performance in salt resistance,recyclable evaporation,and real desalination,This work demonstrates a high-efficiency,cost-effective,multifunctional,and scalable strategy for high-performance fiber fabrics solar interfacial evaporation.展开更多
Sheet metal spinning is an incremental forming process for producing axisymmetric thinwalled parts through continuous local deformation under the action of rollers.While studying the spinning process by finite element...Sheet metal spinning is an incremental forming process for producing axisymmetric thinwalled parts through continuous local deformation under the action of rollers.While studying the spinning process by finite element(FE)method,a critical bottleneck is the enormous simulation time.For beating off this challenge,a novel multi-mesh method is developed.The method can dynamically track the movement of rollers and adaptively refine the mesh.Thus,a locally refined quadrilateral computation mesh can be generated in the locally-deforming zone and reduce the unnecessary fine elements outside the locally-deforming zone.In the multi-mesh system,the fine elements and coarse elements are extracted from a storage mesh and a background mesh,respectively.Meanwhile,the hanging nodes in the locally refined mesh are removed by designing 4-refinement templates.Between computation mesh and storage mesh,a bi-cubic parametric surface fitting algorithm and accurate remapping methods are conducted to transmit geometric information and physical fields.The proposed method has been verified by two spinning processes.The results suggest that the method can save time by up to about 67%with satisfactory accuracy,especially for distributions of thickness and strain compared with the fully refined mesh.展开更多
The dynamic recrystallization(DRX)behavior and texture formation mechanism in an AZ31 magnesium alloy wheel hub during the spinning process were investigated.Analysis using optical microscopy,electron backscatter diff...The dynamic recrystallization(DRX)behavior and texture formation mechanism in an AZ31 magnesium alloy wheel hub during the spinning process were investigated.Analysis using optical microscopy,electron backscatter diffraction,transmission electron microscopy,and finite element simulation revealed that continuous dynamic recrystallization(CDRX)and grain boundary bulging occurred simultaneously throughout the spinning process,leading to an increased proportion of DRXed grain areas.The newly formed DRXed grains largely retained the orientations of their deformed parent grains.The spinning process had two stages:initially,deformation was driven by basalslip as the roller contacted the alloy and descended to its lowest point.In the later stage,pyramidal<c+a>slips became predominant as additional force was applied along the spinning direction(SD),forming a final texture with the c-axis tilting±15°towards the SD.This texture development led to discernible anisotropy in tensile properties along the SD and the tangential direction(TD).展开更多
Based on the Timoshenko beam theory,this paper proposes a nonlocal bi-gyroscopic model for spinning functionally graded(FG)nanotubes conveying fluid,and the thermal–mechanical vibration and stability of such composit...Based on the Timoshenko beam theory,this paper proposes a nonlocal bi-gyroscopic model for spinning functionally graded(FG)nanotubes conveying fluid,and the thermal–mechanical vibration and stability of such composite nanostructures under small scale,rotor,and temperature coupling effects are investigated.The nanotube is composed of functionally graded materials(FGMs),and different volume fraction functions are utilized to control the distribution of material properties.Eringen’s nonlocal elasticity theory and Hamilton’s principle are applied for dynamical modeling,and the forward and backward precession frequencies as well as 3D mode configurations of the nanotube are obtained.By conducting dimensionless analysis,it is found that compared to the Timoshenko nano-beam model,the conventional Euler–Bernoulli(E-B)model holds the same flutter frequency in the supercritical region,while it usually overestimates the higher-order precession frequencies.The nonlocal,thermal,and flowing effects all can lead to buckling or different kinds of coupled flutter in the system.The material distribution of the P-type FGM nanotube can also induce coupled flutter,while that of the S-type FGM nanotube has no impact on the stability of the system.This paper is expected to provide a theoretical foundation for the design of motional composite nanodevices.展开更多
The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of...The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of the initial spin direction,the spin dynamics of the electron beam are found to depend on the self-injection mechanism.The effects of wakefields and laser fields are studied using test particle dynamics and particle-in-cell simulations based on the Thomas-Bargmann-Michel-Telegdi equation.Compared with transverse injection,longitudinal injection is found to be preferable for obtaining a highly polarized electron beam.展开更多
Hyperpolarization of nuclear spins is crucial for advancing nuclear magnetic resonance and quantum information technologies,as nuclear spins typically exhibit extremely low polarization at room temperature due to thei...Hyperpolarization of nuclear spins is crucial for advancing nuclear magnetic resonance and quantum information technologies,as nuclear spins typically exhibit extremely low polarization at room temperature due to their small gyromagnetic ratios.A promising approach to achieving high nuclear spin polarization is transferring the polarization of electrons to nuclear spins.The nitrogen-vacancy(NV)center in diamond has emerged as a highly effective medium for this purpose,and various hyperpolarization protocols have been developed.Among these,the pulsed polarization(PulsePol)method has been extensively studied due to its robustness against static energy shifts of the electron spin.In this work,we present a novel polarization protocol and uncover a family of magic sequences for hyperpolarizing nuclear spins,with PulsePol emerging as a special case of our general approach.Notably,we demonstrate that some of these magic sequences exhibit significantly greater robustness compared to the PulsePol protocol in the presence of finite half𝜋pulse duration of the protocol,Rabi and detuning errors.This enhanced robustness positions our protocol as a more suitable candidate for hyper-polarizing nuclear spins species with large gyromagnetic ratios and also ensures better compatibility with high-efficiency readout techniques at high magnetic fields.Additionally,the generality of our protocol allows for its direct application to other solid-state quantum systems beyond the NV center.展开更多
The hybridization gap in strained-layer InAs/In_(x)Ga_(1−x) Sb quantum spin Hall insulators(QSHIs)is significantly enhanced compared to binary InAs/GaSb QSHI structures,where the typical indium composition,x,ranges be...The hybridization gap in strained-layer InAs/In_(x)Ga_(1−x) Sb quantum spin Hall insulators(QSHIs)is significantly enhanced compared to binary InAs/GaSb QSHI structures,where the typical indium composition,x,ranges between 0.2 and 0.4.This enhancement prompts a critical question:to what extent can quantum wells(QWs)be strained while still preserving the fundamental QSHI phase?In this study,we demonstrate the controlled molecular beam epitaxial growth of highly strained-layer QWs with an indium composition of x=0.5.These structures possess a substantial compressive strain within the In_(0.5)Ga_(0.5)Sb QW.Detailed crystal structure analyses confirm the exceptional quality of the resulting epitaxial films,indicating coherent lattice structures and the absence of visible dislocations.Transport measurements further reveal that the QSHI phase in InAs/In_(0.5)Ga_(0.5)Sb QWs is robust and protected by time-reversal symmetry.Notably,the edge states in these systems exhibit giant magnetoresistance when subjected to a modest perpendicular magnetic field.This behavior is in agreement with the𝑍2 topological property predicted by the Bernevig–Hughes–Zhang model,confirming the preservation of topologically protected edge transport in the presence of enhanced bulk strain.展开更多
We report the development of the[Pt_(0.75)Ti_(0.25)/Co-Ni multilayer/Ta]_n superlattice with strong spin-orbit torque,large perpendicular magnetic anisotropy,and remarkably low switching current density.We demonstrate...We report the development of the[Pt_(0.75)Ti_(0.25)/Co-Ni multilayer/Ta]_n superlattice with strong spin-orbit torque,large perpendicular magnetic anisotropy,and remarkably low switching current density.We demonstrate that the efficiency of the spin-orbit torque increases nearly linearly with the repetition number n,which is in excellent agreement with the spin Hall effect of the Pt_(0.75)Ti_(0.25)being essentially the only source of the observed spin-orbit torque.The perpendicular magnetic anisotropy field is also substantially enhanced by more than a factor of 2 as n increases from 1 to6.The[Pt_(0.75)Ti_(0.25)/Co-Ni multilayers/Ta]_n superlattice additionally exhibits deterministic,low-current-density magnetization switching despite the very large total layer thicknesses.The unique combination of strong spin-orbit torque,robust perpendicular magnetic anisotropy,low-current-density switching,and excellent high thermal stability makes the[Pt_(0.75)Ti_(0.25)/Co-Ni multilayer/Ta]_n superlattice a highly compelling material candidate for ultrafast,energy-efficient,and long-data-retention spintronic technologies.展开更多
Surface polaritons,as surface electromagnetic waves propagating along the surface of a medium,have played a crucial role in enhancing photonic spin Hall effect(PSHE)and developing highly sensitive refractive index(RI)...Surface polaritons,as surface electromagnetic waves propagating along the surface of a medium,have played a crucial role in enhancing photonic spin Hall effect(PSHE)and developing highly sensitive refractive index(RI)sensors.Among them,the traditional surface plasmon polariton(SPP)based on noble metals limits its application beyond the near-infrared(IR)regime due to the large negative permittivity and optical losses.In this contribution,we theoretically proposed a highly sensitive PSHE sensor with the structure of Ge prism-SiC-Si:InAs-sensing medium,by taking advantage of the hybrid surface plasmon phonon polariton(SPPhP)in mid-IR regime.Here,heavily Si-doped InAs(Si:InAs)and SiC excite the SPP and surface phonon polariton(SPhP),and the hybrid SPPhP is realized in this system.More importantly,the designed PSHE sensor based on this SPPhP mechanism achieves the multi-stage RI measurements from 1.00025-1.00225 to 1.70025-1.70225,and the maximal intensity sensitivity and angle sensitivity can be up to 9.4×10^(4)μm/RIU and245°/RIU,respectively.These findings provide a new pathway for the enhancement of PSHE in mid-IR regime,and offer new opportunities to develop highly sensitive RI sensors in multi-scenario applications,such as harmful gas monitoring and biosensing.展开更多
Hot spinning process has attracted significant attention because it can be used to manufacture complex parts, extend the forming limit of materials, decrease forming forces and reduce process chains. In this paper, we...Hot spinning process has attracted significant attention because it can be used to manufacture complex parts, extend the forming limit of materials, decrease forming forces and reduce process chains. In this paper, we review researches on lightweight metals spun at elevated temperatures since they are difficult to deform at room temperature. These metals include light alloys, such as titanium, magnesium and aluminum alloys, and metal composites. Then, the heating methods used in the hot spinning process and the treatment methods employed for the temperature boundary condition in finite element analyses for the process were discussed. Finally, the future development directions for the hot spinning process of lightweight but difficult-to-deform alloys were highlighted.展开更多
The nanocrystalline and amorphous Mg2Ni-type alloys with a chemical composition of （Mg24Ni10Cu2）100-xNdx （x=0, 5, 10, 15, 20） were fabricated by melt spinning technology. The effects of spinning rate on the struct...The nanocrystalline and amorphous Mg2Ni-type alloys with a chemical composition of （Mg24Ni10Cu2）100-xNdx （x=0, 5, 10, 15, 20） were fabricated by melt spinning technology. The effects of spinning rate on the structure and electrochemical hydrogen storage performance of the alloys were investigated. The as-spun Nd-free alloy displays an entire nanocrystalline structure, whereas the as-spun Nd-added alloys hold a nanocrystalline and amorphous structure, suggesting that the addition of Nd facilitates the glass forming of the Mg2Ni-type alloys. Increasing the spinning rate from 0 to 40 m/s gives rise to the discharge capacity growing from 42.5 to 100.6 mA·h/g for the x=0 alloy and from 86.4 to 452.8 mA·h/g for the x=10 alloy. And the cycle stability （S20） rises from 40.2%to 41.1%for the x=0 alloy and from 53.2%to 89.7%for the x=10 alloy, respectively.展开更多
The influences of power spinning process parameters on the mechanical properties of spinning parts were analyzed with an SXD100/3-CNC numerical control power spinning machine.The unidirectional tensile tests were carr...The influences of power spinning process parameters on the mechanical properties of spinning parts were analyzed with an SXD100/3-CNC numerical control power spinning machine.The unidirectional tensile tests were carried out.Based on the experimental data,a ternary quadratic regression equation was established by orthogonal experiment.The Ramberg-Osgood constitutive model of tin-bronze connecting rod bushing was obtained.Referred to the constitutive relation of macroscopic incremental,the incremental elastoplastic constitutive relation of spinning parts was deduced based on the Mises yield criterion and kinematic hardening model.The results can be applied to the elastoplastic analysis in finite element numerical simulation.展开更多
基金financial support from the National Natural Science Foundation of China(Grant No.52273067,52233006)the Fundamental Research Funds for the Central Universities(Grant No.2232023A-03)+3 种基金the Shuguang Program of Shanghai Education Development Foundation and Shanghai Municipal Education Commission(Grant No.23SG29)the Natural Science Foundation of Shanghai(Grant No.24ZR1402400)the Shanghai Scientific and Technological Innovation Project(Grant No.24520713000)Innovation Program of Shanghai Municipal Education Commission(Grant No.2021-01-07-00-03-E00108).
文摘Radiative cooling textiles with spectrally selective surfaces offer a promising energy-efficient approach for sub-ambient cooling of outdoor objects and individuals.However,the spectrally selective mid-infrared emission of these textiles significantly hinders their efficient radiative heat exchange with self-heated objects,thereby posing a significant challenge to their versatile cooling applicability.Herein,we present a bicomponent blow spinning strategy for the production of scalable,ultra-flexible,and healable textiles featuring a tailored dual gradient in both chemical composition and fiber diameter.The gradient in the fiber diameter of this textile introduces a hierarchically porous structure across the sunlight incident area,thereby achieving a competitive solar reflectivity of 98.7%on its outer surface.Additionally,the gradient in the chemical composition of this textile contributes to the formation of Janus infrared-absorbing surfaces:The outer surface demonstrates a high mid-infrared emission,whereas the inner surface shows a broad infrared absorptivity,facilitating radiative heat exchange with underlying self-heated objects.Consequently,this textile demonstrates multi-scenario radiative cooling capabilities,enabling versatile outdoor cooling for unheated objects by 7.8℃ and self-heated objects by 13.6℃,compared to commercial sunshade fabrics.
基金supported by the National Natural Science Foundation of China(No.51905123)Major Scientific and Technological Innovation Program of Shandong Province,China(Nos.2020CXGC010303,2022ZLGX04)Key R&D Programme of Shandong Province,China(No.2022JMRH0308).
文摘An internal state variable(ISV)model was established according to the experimental results of hot plane strain compression(PSC)to predict the microstructure evolution during hot spinning of ZK61 alloy.The effects of the internal variables were considered in this ISV model,and the parameters were optimized by genetic algorithm.After validation,the ISV model was used to simulate the evolution of grain size(GS)and dynamic recrystallization(DRX)fraction during hot spinning via Abaqus and its subroutine Vumat.By comparing the simulated results with the experimental results,the application of the ISV model was proven to be reliable.Meanwhile,the strength of the thin-walled spun ZK61 tube increased from 303 to 334 MPa due to grain refinement by DRX and texture strengthening.Besides,some ultrafine grains(0.5μm)that played an important role in mechanical properties were formed due to the proliferation,movement,and entanglement of dislocations during the spinning process.
文摘Precision,speed and cost efficiency are all indispensable,especially in challenging times.Rieter has put together a powerful portfolio for ITMA ASIA+CITME 2025 that gives spinning mills the chance to actively shape the future through intelligent automation.This is a key milestone on the way to achieving Rieter’s vision 2027-the fully automated spinning mill.
基金the National Key Research and Development Program of China(Grant No.2022YFC3901902)the National Natural Science Foundation of China(Grant Nos.52203037,52103031,and 52073107)。
文摘Fiber fabrics have been wildly utilized for solar interracial evaporators to address freshwater scarcity.However,the complex and expensive manufacturing processes remain limited to their scalable development.Herein,a fabric-based Janus interracial evaporator is efficiently fabricated on a large scale by integrating an extremely innovative self-designed melt-centrifugal spinning technology with spray coating technology.The prepared fabric-based Janus interfacial evaporator has differential hydrophilicity,uneven surfaces,and channels that allow moisture escape.Benefiting from the excellent photothermai conversion of graphene oxide and the charge transfer actions of titanium dioxide,such a multifunction evaporator can reach a high evaporation rate of 1.72 kg m^(-2)h^(-1)under 1 sun irradiation,a superior antibacterial rate of 99%,excellent photocatalytic degradation,and effective thermoelectric ability simultaneously.Moreover,it also shows fantastic performance in salt resistance,recyclable evaporation,and real desalination,This work demonstrates a high-efficiency,cost-effective,multifunctional,and scalable strategy for high-performance fiber fabrics solar interfacial evaporation.
基金co-supported by the supports of Guangdong Basic and Applied Basic Research Foundation(No.2019B1515120047)the National Natural Science Foundation of China(No.52130507)。
文摘Sheet metal spinning is an incremental forming process for producing axisymmetric thinwalled parts through continuous local deformation under the action of rollers.While studying the spinning process by finite element(FE)method,a critical bottleneck is the enormous simulation time.For beating off this challenge,a novel multi-mesh method is developed.The method can dynamically track the movement of rollers and adaptively refine the mesh.Thus,a locally refined quadrilateral computation mesh can be generated in the locally-deforming zone and reduce the unnecessary fine elements outside the locally-deforming zone.In the multi-mesh system,the fine elements and coarse elements are extracted from a storage mesh and a background mesh,respectively.Meanwhile,the hanging nodes in the locally refined mesh are removed by designing 4-refinement templates.Between computation mesh and storage mesh,a bi-cubic parametric surface fitting algorithm and accurate remapping methods are conducted to transmit geometric information and physical fields.The proposed method has been verified by two spinning processes.The results suggest that the method can save time by up to about 67%with satisfactory accuracy,especially for distributions of thickness and strain compared with the fully refined mesh.
基金funded by the National Natural Science Foundation of China(No.52204407)the Natural Science Foundation of Jiangsu Province,China(No.BK20220595)the China Postdoctoral Science Foundation(No.2022M723689)。
文摘The dynamic recrystallization(DRX)behavior and texture formation mechanism in an AZ31 magnesium alloy wheel hub during the spinning process were investigated.Analysis using optical microscopy,electron backscatter diffraction,transmission electron microscopy,and finite element simulation revealed that continuous dynamic recrystallization(CDRX)and grain boundary bulging occurred simultaneously throughout the spinning process,leading to an increased proportion of DRXed grain areas.The newly formed DRXed grains largely retained the orientations of their deformed parent grains.The spinning process had two stages:initially,deformation was driven by basalslip as the roller contacted the alloy and descended to its lowest point.In the later stage,pyramidal<c+a>slips became predominant as additional force was applied along the spinning direction(SD),forming a final texture with the c-axis tilting±15°towards the SD.This texture development led to discernible anisotropy in tensile properties along the SD and the tangential direction(TD).
基金National Natural Science Foundation of China,12372025,Feng Liang,12072311,Feng Liang.
文摘Based on the Timoshenko beam theory,this paper proposes a nonlocal bi-gyroscopic model for spinning functionally graded(FG)nanotubes conveying fluid,and the thermal–mechanical vibration and stability of such composite nanostructures under small scale,rotor,and temperature coupling effects are investigated.The nanotube is composed of functionally graded materials(FGMs),and different volume fraction functions are utilized to control the distribution of material properties.Eringen’s nonlocal elasticity theory and Hamilton’s principle are applied for dynamical modeling,and the forward and backward precession frequencies as well as 3D mode configurations of the nanotube are obtained.By conducting dimensionless analysis,it is found that compared to the Timoshenko nano-beam model,the conventional Euler–Bernoulli(E-B)model holds the same flutter frequency in the supercritical region,while it usually overestimates the higher-order precession frequencies.The nonlocal,thermal,and flowing effects all can lead to buckling or different kinds of coupled flutter in the system.The material distribution of the P-type FGM nanotube can also induce coupled flutter,while that of the S-type FGM nanotube has no impact on the stability of the system.This paper is expected to provide a theoretical foundation for the design of motional composite nanodevices.
基金supported by the National Natural Science Foundation of China(Grant Nos.11804348,11775056,11975154,12225505,and 12405281)the Science Challenge(Project No.TZ2018005)+2 种基金supported by the Shanghai Pujiang Program(Grant No.23PJ1414600)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0890203)supported by the Accelerator Technology Helmholtz Infrastructure consortium ATHENA.
文摘The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of the initial spin direction,the spin dynamics of the electron beam are found to depend on the self-injection mechanism.The effects of wakefields and laser fields are studied using test particle dynamics and particle-in-cell simulations based on the Thomas-Bargmann-Michel-Telegdi equation.Compared with transverse injection,longitudinal injection is found to be preferable for obtaining a highly polarized electron beam.
基金supported by the National Natural Science Foundation of China (Grant Nos.12475012,62461160263 for P.W.,and 62276171 for H.L.)Quantum Science and Technology-National Science and Technology Major Project of China (Project No.2023ZD0300600 for P.W.)+3 种基金Guangdong Provincial Quantum Science Strategic Initiative (Grant Nos.GDZX240-3009 and GDZX2303005 for P.W.)Guangdong Basic and Applied Basic Research Foundation (Grant No.2024-A1515011938 for H.L.)Shenzhen Fundamental ResearchGeneral Project (Grant No.JCYJ20240813141503005 for H.L.)the Talents Introduction Foundation of Beijing Normal University (Grant No.310432106 for P.W.)。
文摘Hyperpolarization of nuclear spins is crucial for advancing nuclear magnetic resonance and quantum information technologies,as nuclear spins typically exhibit extremely low polarization at room temperature due to their small gyromagnetic ratios.A promising approach to achieving high nuclear spin polarization is transferring the polarization of electrons to nuclear spins.The nitrogen-vacancy(NV)center in diamond has emerged as a highly effective medium for this purpose,and various hyperpolarization protocols have been developed.Among these,the pulsed polarization(PulsePol)method has been extensively studied due to its robustness against static energy shifts of the electron spin.In this work,we present a novel polarization protocol and uncover a family of magic sequences for hyperpolarizing nuclear spins,with PulsePol emerging as a special case of our general approach.Notably,we demonstrate that some of these magic sequences exhibit significantly greater robustness compared to the PulsePol protocol in the presence of finite half𝜋pulse duration of the protocol,Rabi and detuning errors.This enhanced robustness positions our protocol as a more suitable candidate for hyper-polarizing nuclear spins species with large gyromagnetic ratios and also ensures better compatibility with high-efficiency readout techniques at high magnetic fields.Additionally,the generality of our protocol allows for its direct application to other solid-state quantum systems beyond the NV center.
基金supported by the Strategic Priority Research Program of Chinese Academy of Sciences (Grant Nos.XDB28000000 and XDB0460000)the Quantum Science and Technology-National Science and Technology Major Project (Grant No.2021ZD0302600)the National Key Research and Development Program of China(Grant No.2024YFA1409002)。
文摘The hybridization gap in strained-layer InAs/In_(x)Ga_(1−x) Sb quantum spin Hall insulators(QSHIs)is significantly enhanced compared to binary InAs/GaSb QSHI structures,where the typical indium composition,x,ranges between 0.2 and 0.4.This enhancement prompts a critical question:to what extent can quantum wells(QWs)be strained while still preserving the fundamental QSHI phase?In this study,we demonstrate the controlled molecular beam epitaxial growth of highly strained-layer QWs with an indium composition of x=0.5.These structures possess a substantial compressive strain within the In_(0.5)Ga_(0.5)Sb QW.Detailed crystal structure analyses confirm the exceptional quality of the resulting epitaxial films,indicating coherent lattice structures and the absence of visible dislocations.Transport measurements further reveal that the QSHI phase in InAs/In_(0.5)Ga_(0.5)Sb QWs is robust and protected by time-reversal symmetry.Notably,the edge states in these systems exhibit giant magnetoresistance when subjected to a modest perpendicular magnetic field.This behavior is in agreement with the𝑍2 topological property predicted by the Bernevig–Hughes–Zhang model,confirming the preservation of topologically protected edge transport in the presence of enhanced bulk strain.
基金supported by the Beijing Natural Science Foundation(Grant No.Z230006)the National Key Research and Development Program of China(Grant No.2022YFA1204000)the National Natural Science Foundation of China(Grant Nos.12274405 and 12393831)。
文摘We report the development of the[Pt_(0.75)Ti_(0.25)/Co-Ni multilayer/Ta]_n superlattice with strong spin-orbit torque,large perpendicular magnetic anisotropy,and remarkably low switching current density.We demonstrate that the efficiency of the spin-orbit torque increases nearly linearly with the repetition number n,which is in excellent agreement with the spin Hall effect of the Pt_(0.75)Ti_(0.25)being essentially the only source of the observed spin-orbit torque.The perpendicular magnetic anisotropy field is also substantially enhanced by more than a factor of 2 as n increases from 1 to6.The[Pt_(0.75)Ti_(0.25)/Co-Ni multilayers/Ta]_n superlattice additionally exhibits deterministic,low-current-density magnetization switching despite the very large total layer thicknesses.The unique combination of strong spin-orbit torque,robust perpendicular magnetic anisotropy,low-current-density switching,and excellent high thermal stability makes the[Pt_(0.75)Ti_(0.25)/Co-Ni multilayer/Ta]_n superlattice a highly compelling material candidate for ultrafast,energy-efficient,and long-data-retention spintronic technologies.
基金Project supported by the National Natural Science Foundation of China(Grant No.12175107)the Qing Lan Project of Jiangsu Province+2 种基金the Hua Li Talents Program of Nanjing University of PostsTelecommunications,Natural Science Foundation of Nanjing Vocational University of Industry Technology(Grant No.YK22-02-08)the Fund from the Research Center of Industrial Perception and Intelligent Manufacturing Equipment Engineering of Jiangsu Province,China(Grant No.ZK21-05-09)。
文摘Surface polaritons,as surface electromagnetic waves propagating along the surface of a medium,have played a crucial role in enhancing photonic spin Hall effect(PSHE)and developing highly sensitive refractive index(RI)sensors.Among them,the traditional surface plasmon polariton(SPP)based on noble metals limits its application beyond the near-infrared(IR)regime due to the large negative permittivity and optical losses.In this contribution,we theoretically proposed a highly sensitive PSHE sensor with the structure of Ge prism-SiC-Si:InAs-sensing medium,by taking advantage of the hybrid surface plasmon phonon polariton(SPPhP)in mid-IR regime.Here,heavily Si-doped InAs(Si:InAs)and SiC excite the SPP and surface phonon polariton(SPhP),and the hybrid SPPhP is realized in this system.More importantly,the designed PSHE sensor based on this SPPhP mechanism achieves the multi-stage RI measurements from 1.00025-1.00225 to 1.70025-1.70225,and the maximal intensity sensitivity and angle sensitivity can be up to 9.4×10^(4)μm/RIU and245°/RIU,respectively.These findings provide a new pathway for the enhancement of PSHE in mid-IR regime,and offer new opportunities to develop highly sensitive RI sensors in multi-scenario applications,such as harmful gas monitoring and biosensing.
基金Project(51222509) supported by the National Science Fund for Excellent Young Scholars of ChinaProject(51175429) supported by the National Natural Science Foundation of ChinaProjects(97-QZ-2014,90-QP-2013) supported by the Research Fund of the State Key Laboratory of Solidification Processing(NWPU) of China
文摘Hot spinning process has attracted significant attention because it can be used to manufacture complex parts, extend the forming limit of materials, decrease forming forces and reduce process chains. In this paper, we review researches on lightweight metals spun at elevated temperatures since they are difficult to deform at room temperature. These metals include light alloys, such as titanium, magnesium and aluminum alloys, and metal composites. Then, the heating methods used in the hot spinning process and the treatment methods employed for the temperature boundary condition in finite element analyses for the process were discussed. Finally, the future development directions for the hot spinning process of lightweight but difficult-to-deform alloys were highlighted.
基金Projects (51161015,51371094) supported by the National Natural Science Foundation of ChinaProject (2011ZD10) supported by the Natural Science Foundation of Inner Mongolia,China
文摘The nanocrystalline and amorphous Mg2Ni-type alloys with a chemical composition of （Mg24Ni10Cu2）100-xNdx （x=0, 5, 10, 15, 20） were fabricated by melt spinning technology. The effects of spinning rate on the structure and electrochemical hydrogen storage performance of the alloys were investigated. The as-spun Nd-free alloy displays an entire nanocrystalline structure, whereas the as-spun Nd-added alloys hold a nanocrystalline and amorphous structure, suggesting that the addition of Nd facilitates the glass forming of the Mg2Ni-type alloys. Increasing the spinning rate from 0 to 40 m/s gives rise to the discharge capacity growing from 42.5 to 100.6 mA·h/g for the x=0 alloy and from 86.4 to 452.8 mA·h/g for the x=10 alloy. And the cycle stability （S20） rises from 40.2%to 41.1%for the x=0 alloy and from 53.2%to 89.7%for the x=10 alloy, respectively.
基金Supported by the Research and Development Projects of Science and Technology of Hebei Province(06242188D-2)the Natural Science Foundation of Hebei Province(F2007000221)
基金Project(2012011023-2)supported by the Natural Science Foundation of Shanxi Province,China
文摘The influences of power spinning process parameters on the mechanical properties of spinning parts were analyzed with an SXD100/3-CNC numerical control power spinning machine.The unidirectional tensile tests were carried out.Based on the experimental data,a ternary quadratic regression equation was established by orthogonal experiment.The Ramberg-Osgood constitutive model of tin-bronze connecting rod bushing was obtained.Referred to the constitutive relation of macroscopic incremental,the incremental elastoplastic constitutive relation of spinning parts was deduced based on the Mises yield criterion and kinematic hardening model.The results can be applied to the elastoplastic analysis in finite element numerical simulation.
