In contemporary medium-voltage distribution networks heavily penetrated by distributed energy resources(DERs),the harmonic components injected by power-electronic interfacing converters,together with the inherently in...In contemporary medium-voltage distribution networks heavily penetrated by distributed energy resources(DERs),the harmonic components injected by power-electronic interfacing converters,together with the inherently intermittent output of renewable generation,distort the zero-sequence current and continuously reshape its frequency spectrum.As a result,single-line-to-ground(SLG)faults exhibit a pronounced,strongly non-stationary behaviour that varies with operating point,load mix and DER dispatch.Under such circumstances the performance of traditional rule-based algorithms—or methods that rely solely on steady-state frequency-domain indicators—degrades sharply,and they no longer satisfy the accuracy and universality required by practical protection systems.To overcome these shortcomings,the present study develops an SLG-fault identification scheme that transforms the zero-sequence currentwaveforminto two-dimensional image representations and processes themwith a convolutional neural network(CNN).First,the causes of sample-distribution imbalance are analysed in detail by considering different neutralgrounding configurations,fault-inception mechanisms and the statistical probability of fault occurrence on each phase.Building on these insights,a discriminator network incorporating a Convolutional Block Attention Module(CBAM)is designed to autonomously extract multi-layer spatial-spectral features,while Gradient-weighted Class Activation Mapping(Grad-CAM)is employed to visualise the contribution of every salient image region,thereby enhancing interpretability.A comprehensive simulation platform is subsequently established for a DER-rich distribution system encompassing several representative topologies,feeder lengths and DER penetration levels.Large numbers of realistic SLG-fault scenarios are generated—including noise and measurement uncertainty—and are used to train,validate and test the proposed model.Extensive simulation campaigns,corroborated by field measurements from an actual utility network,demonstrate that the proposed approach attains an SLG-fault identification accuracy approaching 100 percent and maintains robust performance under severe noise conditions,confirming its suitability for real-world engineering applications.展开更多
The way of neutral point to earth via full compensation arc suppression coil can solve the problem of residual current compensation in coal mine power network effectively. Based on the analysis on the grounding curren...The way of neutral point to earth via full compensation arc suppression coil can solve the problem of residual current compensation in coal mine power network effectively. Based on the analysis on the grounding current detection results of Xieqiao coal mine, the conclusion that harmonic component of grounding current is dominated by higher harmonics with complex harmonic sources in coal mine power network system was obtained. The influences of harmonic source type and fault point position on harmonic voltage and harmonic current were analyzed theoretically. The influences of earthed fault feeder detection result and the estimation errors of parameters to earth on residual current compensation were analyzed. A new thought of residual current prediction and the selections of model method and control method were proposed on this basis. The simulation results prove that harmonic amplitudes of zero sequence voltage and zero sequence current are determined by harmonic source type as well as fault point position in coal mine power network, and also prove that zero sequence voltage detection can avoid the unstable problem of coal mine power network system caused by undercompensation of capacitive current. Finally, the experimental device of full compensation arc suppression coil is introduced.展开更多
To address the problems of wind power abandonment and the stoppage of electricity transmission caused by a short circuit in a power line of a doubly-fed induction generator(DFIG) based wind farm, this paper proposes a...To address the problems of wind power abandonment and the stoppage of electricity transmission caused by a short circuit in a power line of a doubly-fed induction generator(DFIG) based wind farm, this paper proposes an intelligent location method for a single-phase grounding fault based on a multiple random forests(multi-RF) algorithm. First, the simulation model is built, and the fundamental amplitudes of the zerosequence currents are extracted by a fast Fourier transform(FFT) to construct the feature set. Then, the random forest classification algorithm is applied to establish the fault section locator. The model is resampled on the basis of the bootstrap method to generate multiple sample subsets, which are used to establish multiple classification and regression tree(CART) classifiers. The CART classifiers use the mean decrease in the node impurity as the feature importance,which is used to mine the relationship between features and fault sections. Subsequently, a fault section is identified by voting on the test results for each classifier. Finally, a multi-RF regression fault locator is built to output the predicted fault distance. Experimental results with PSCAD/EMTDC software show that the proposed method can overcome the shortcomings of a single RF and has the advantage of locating a short hybrid overhead/cable line with multiple branches. Compared with support vector machines(SVMs)and previously reported methods, the proposed method can meet the location accuracy and efficiency requirements of a DFIG-based wind farm better.展开更多
Definite-time zero-sequence over-current protection is presently used in systems whose neutral point is grounded by a low resistance(low-resistance grounding systems).These systems frequently malfunction owing to thei...Definite-time zero-sequence over-current protection is presently used in systems whose neutral point is grounded by a low resistance(low-resistance grounding systems).These systems frequently malfunction owing to their high settings of the action value when a high-impedance grounding fault occurs.In this study,the relationship between the zero-sequence currents of each feeder and the neutral branch was analyzed.Then,a grounding protection method was proposed on the basis of the zero-sequence current ratio coefficient.It is defined as the ratio of the zero-sequence current of the feeder to that of the neutral branch.Nonetheless,both zero-sequence voltage and zero-sequence current are affected by the transition resistance,The influence of transition resistance can be eliminated by calculating this coefficient.Therefore,a method based on the zero-sequence current ratio coefficient was proposed considering the significant difference between the faulty feeder and healthy feeder.Furthermore,unbalanced current can be prevented by setting the starting current.PSCAD simulation results reveal that the proposed method shows high reliability and sensitivity when a high-resistance grounding fault occurs.展开更多
Due to the wide and adjustable emission range,Ce^(3+)is an indispensable luminous center for full spectrum lighting.However,it needs to be sintered at high temperature in a reducing atmosphere,resulting in difficulty ...Due to the wide and adjustable emission range,Ce^(3+)is an indispensable luminous center for full spectrum lighting.However,it needs to be sintered at high temperature in a reducing atmosphere,resulting in difficulty to coexisting with other multivalent activated ions(such as Eu^(3+),Tm^(3+)),which greatly hinders the formation of full spectrum.In this study,a calcium vacancy enhanced self-reduction of Ce^(4+)is realized in CaNaSb_(2)O_(6)F(CNSOF)host under air atmosphere sintering,through which Ce^(3+),Tm^(3+)and Eu^(3+)coexisting in a single-phase full spectrum phosphor was prepared.Notably,the artificial introduction of a calcium vacancy was designed to verify this self-reduction mechanism.Moreover,the energy transfer kinetics among Tm^(3+),Ce^(3+)and Eu^(3+)were explored.Finally,combined with a 340 nm UV chip,a full spectrum phosphor-converted light-emitting diode(pc-LED)was fabricated,showing a broad emission range from 400 to 750 nm,Commission Internationale de I'Edairage(CIE)of(0.3485,0.3673),Ra of 92 and correlated color temperature(CCT)of 4933 K.Utilizing the variation in emission colors of this phosphor under different UV wavelengths,a dual encryption method combining point character code and fluorescent encryption technique is proposed.This work provides an effective path for Ce^(4+)self-reduction to apply in full spectrum pc-LED and information encryption.展开更多
It is important for the safety of transmission system to accurately calculate single-phase earth fault current distribution.Features of double sided elimination method were illustrated.Quantitative calculation of sing...It is important for the safety of transmission system to accurately calculate single-phase earth fault current distribution.Features of double sided elimination method were illustrated.Quantitative calculation of single-phase earth fault current distribution and case verification were accomplished by using the loop method.Influences of some factors,such as single-phase earth fault location and ground resistance of poles,on short-circuit current distribution were discussed.Results show that:1) results of the loop method conform to those of double sided elimination method;2) the fault location hardly influences macro-distribution of short-circuit current.However,current near fault location is evidently influenced;and 3) the short-circuit current distribution is not so sensitive to the ground resistance of poles.展开更多
In order to increase the stability of the Mongolia power system, a single-phase automatic reclosing device (SPAR) was introduced on double-circuit power lines built with a size of 330 kV, operating on a voltage of 220...In order to increase the stability of the Mongolia power system, a single-phase automatic reclosing device (SPAR) was introduced on double-circuit power lines built with a size of 330 kV, operating on a voltage of 220 kV and a length of 250 km. These overhead power lines (L-213, L-214) connect the 220/110/35 kV “Songino” substation with the “Mandal” substation and form system networks. This paper presents the challenges encountered when implementing single-phase automatic reclosing (SPAR) devices and compares the changes in power system parameters before and after SPAR deployment for a long 220 kV line. Simulations and analyses were carried out using DIgSILENT PowerFactory software, focusing on rotor angle stability, and the overall impact on the power system during short-circuit faults. The evaluation also utilized measurement data from the Wide Area Monitoring System (WAMS) to compare system behavior pre- and post-implementation of SPAR. The findings reveal that SPAR significantly enhances system reliability and stability, effectively mitigating the risk of oscillations and stability loss triggered by short circuits. This improvement contributes to a more resilient power system, reducing the potential for disturbances caused by faults.展开更多
In this study, the ground potential rise(GPR) phenomenon caused by a lightning current injected into a field-shaped artificial grounding grid, as well as the potential difference between two different nodes at the edg...In this study, the ground potential rise(GPR) phenomenon caused by a lightning current injected into a field-shaped artificial grounding grid, as well as the potential difference between two different nodes at the edge of the grounding grid, was observed and analyzed under artificially triggered lightning conditions. Based on circuit theory and measured current data, a π-equivalent circuit was established to simulate the transient response of the grounding grid.Nineteen return strokes from three artificially triggered lightning events were analyzed. The peak currents of the 19 return strokes range from -6.7 to -25.1 kA, and the mean value was -14.3 kA. The GPR decreased rapidly and formed a subpeak after reaching the initial peak, with the mean value of the initial peak being -148.65 kV and the mean value of the subpeak being -92.87 kV. The GPR induced by the triggered lightning currents exhibited a subpeak phenomenon. Simulation results indicate that the subpeak phenomenon is related to localized corrosion of the vertical grounding electrode. The potential difference at the grounding grid edge exhibited a multi-pulse waveform with alternating polarity, dominated by positive pulses. The peak values of both the positive and negative polarity pulses gradually decreased, with the first positive pulse displaying a significantly higher intensity than that of subsequent pulses.展开更多
Backfill is routinely adopted as a ground support measure for underground mines.However,ground stability enhancement by backfill has received limited research attention.This is likely to be because of the conventional...Backfill is routinely adopted as a ground support measure for underground mines.However,ground stability enhancement by backfill has received limited research attention.This is likely to be because of the conventional assumption that the fill material exhibits a significantly lower stiffness than the host rocks.Significantly,a recent pioneering work revealed the time-dependent ground stability around a backfilled stope with vertical walls through numerical modeling.In practice,underground stopes typically exhibit a higher or lower degree of inclination.This alters the stress state in peripheral rocks and may induce severe instability and dilution,particularly in stope-hanging walls.Hence,it is imperative to analyze the time-dependent ground stability of inclined backfilled stopes for backfill structure design.Therefore,comprehensive numerical simulations were performed using FLAC3D to address this knowledge deficiency by incorporating a coupled analysis of the backfill consolidation behavior and long-term creep deformation in surrounding rocks.The ground stability was evaluated based on the confinement effectiveness,strength-stress ratio,stress path relative to the yield surface,and time-dependent stress redistribution in the rocks.A parametric study revealed that the inclination angle of the backfilled stope reduced the confinement effectiveness in the host rocks when the wall creep was minor.This exacerbated the rock mass sloughing potential.However,a backfilled stope with a shallower dip angle achieved superior ground stability enhancement when the creep deformation was substantial,by applying a more significant compression on the backfill and effectively mobilizing its passive support performance during consolidation.Additional simulations were conducted to analyze the effects of stope height and width,mine depth,mechanical properties of rocks,backfill compressibility,and filling gap on the time-dependent stress redistribution and stability around the inclined backfilled stope.展开更多
Rapidly-exploring Random Tree(RRT)and its variants have become foundational in path-planning research,yet in complex three-dimensional off-road environments their uniform blind sampling and limited safety guarantees l...Rapidly-exploring Random Tree(RRT)and its variants have become foundational in path-planning research,yet in complex three-dimensional off-road environments their uniform blind sampling and limited safety guarantees lead to slow convergence and force an unfavorable trade-off between path quality and traversal safety.To address these challenges,we introduce HS-APF-RRT*,a novel algorithm that fuses layered sampling,an enhanced Artificial Potential Field(APF),and a dynamic neighborhood-expansion mechanism.First,the workspace is hierarchically partitioned into macro,meso,and micro sampling layers,progressively biasing random samples toward safer,lower-energy regions.Second,we augment the traditional APF by incorporating a slope-dependent repulsive term,enabling stronger avoidance of steep obstacles.Third,a dynamic expansion strategy adaptively switches between 8 and 16 connected neighborhoods based on local obstacle density,striking an effective balance between search efficiency and collision-avoidance precision.In simulated off-road scenarios,HS-APF-RRT*is benchmarked against RRT*,GoalBiased RRT*,and APF-RRT*,and demonstrates significantly faster convergence,lower path-energy consumption,and enhanced safety margins.展开更多
Honeycombing Lung(HCL)is a chronic lung condition marked by advanced fibrosis,resulting in enlarged air spaces with thick fibrotic walls,which are visible on Computed Tomography(CT)scans.Differentiating between normal...Honeycombing Lung(HCL)is a chronic lung condition marked by advanced fibrosis,resulting in enlarged air spaces with thick fibrotic walls,which are visible on Computed Tomography(CT)scans.Differentiating between normal lung tissue,honeycombing lungs,and Ground Glass Opacity(GGO)in CT images is often challenging for radiologists and may lead to misinterpretations.Although earlier studies have proposed models to detect and classify HCL,many faced limitations such as high computational demands,lower accuracy,and difficulty distinguishing between HCL and GGO.CT images are highly effective for lung classification due to their high resolution,3D visualization,and sensitivity to tissue density variations.This study introduces Honeycombing Lungs Network(HCL Net),a novel classification algorithm inspired by ResNet50V2 and enhanced to overcome the shortcomings of previous approaches.HCL Net incorporates additional residual blocks,refined preprocessing techniques,and selective parameter tuning to improve classification performance.The dataset,sourced from the University Malaya Medical Centre(UMMC)and verified by expert radiologists,consists of CT images of normal,honeycombing,and GGO lungs.Experimental evaluations across five assessments demonstrated that HCL Net achieved an outstanding classification accuracy of approximately 99.97%.It also recorded strong performance in other metrics,achieving 93%precision,100%sensitivity,89%specificity,and an AUC-ROC score of 97%.Comparative analysis with baseline feature engineering methods confirmed the superior efficacy of HCL Net.The model significantly reduces misclassification,particularly between honeycombing and GGO lungs,enhancing diagnostic precision and reliability in lung image analysis.展开更多
The widely distributed loess deposits in the Yellow River Basin exhibit unique engineering geological characteristics.The variations in their thickness and stratigraphic structure significantly amplify ground motion p...The widely distributed loess deposits in the Yellow River Basin exhibit unique engineering geological characteristics.The variations in their thickness and stratigraphic structure significantly amplify ground motion parameters,directly influencing the regional seismic hazard risk level.This study methodically conducted on-site studies and observations of building collapses and damages resulting from seismic amplification effects,using the Wenchuan M_(S)8.0 earthquake as a case study.Comprehensive experimental and numerical simulation studies were carried out.A large-scale shaking table test was performed,and numerical models for 14 different loess sites types were established.Various types of seismic waves were incorporated into these models for systematic numerical simulation calculations.The research reveals the mechanisms by which loess deposit thickness and stratigraphic structure in the Yellow River Basin affect seismic ground motion amplification.The results indicate that as the epicentral distance increases,the peak ground motion shows a marked attenuation trend,with the horizontal component attenuating substantially faster than the vertical component.As the overlying loess layer thickness increases from 50 to 100 m,the seismic intensity may escalate by 3−4 degrees,and the peak acceleration may amplify by 1.5−2.2 times.With the augmentation of loess deposit thickness and the proliferation of soil layers,both the peak acceleration response spectrum and the characteristic period demonstrate an upward tendency,exhibiting slight fluctuations contingent upon the seismic wave type.展开更多
Shield tunneling in saturated ground poses challenges due to the potential risk of ground collapse resulting from seepage force and inadequate support pressure.This study employed a laboratory model test and a theoret...Shield tunneling in saturated ground poses challenges due to the potential risk of ground collapse resulting from seepage force and inadequate support pressure.This study employed a laboratory model test and a theoretical validation to elucidate the mechanisms of face failure and subsequent ground collapse in saturated ground during slurry pressure-balanced shield(SPBS)tunneling operations.A slurry circulation system was developed to ensure steady shield tunneling and to replicate the phenomena of ground collapse.Investigations into shield tunneling parameters and ground responses,including soil pressure,pore water pressure,and surface subsidence,were conducted to understand the mechanisms of face failure and subsequent ground collapse.The theoretical solution for the critical collapse pressure of the tunnel face,based on the rotational failure mechanism,was validated through the comparison with the experimentally determined critical collapse pressure.The results indicate that:(1)appropriate adjustments of tunneling parameters are crucial for promoting filtercake formation,maintaining chamber pressure,and minimizing ground subsidence;(2)chamber pressure,soil pressure,pore water pressure,and ground subsidence are closely correlated with shield tunneling parameters and the formation of filter cake;(3)ground collapse follows a continuous failure mode due to the destruction of filtercake and the decrease in chamber pressure;(4)the soil pressure at the cutterhead is more sensitive to disturbances from shield tunneling than chamber pressure;and(5)experimentally determined critical collapse pressures is consistent with the theoretical solution of limit analysis.展开更多
The research findings on the ground motion and liquefaction potential analyses during the 2018 Great Indonesia Earthquake(M_(w)7.5)are significant and crucial.The earthquake triggered soil-structure damage due to liqu...The research findings on the ground motion and liquefaction potential analyses during the 2018 Great Indonesia Earthquake(M_(w)7.5)are significant and crucial.The earthquake triggered soil-structure damage due to liquefaction.This study,which thoroughly investigated four sites at Palu,was conducted by performing a comprehensive ground motion parameter analysis.The ground motion characteristics were presented and justified,particularly for the most impacted direction.Ground motion predictions were analysed to define the spectral accelerations,and matching spectral accelerations were conducted to produce ground motions for each site.Non-linear seismic ground response analysis based on the hyperbolic model of pressure pressure-dependent was performed to investigate cyclic soil behaviour.The results revealed that ground motion is crucial in significant soil damage,and the earthquake energy could trigger deep liquefaction.As the most significant ground motion,the vertical ground motion is essential in determining deep liquefaction.The discussion on the impact of liquefaction based on the results of the numerical analysis is presented.Significant ground motion with a longer duration could have a substantial impact on deep liquefaction in the study area.These findings depict how the 2018 Indonesia Earthquake(M_(w)7.5)triggered a mega-liquefaction in Palu City.The results could enhance the understanding of the importance of seismic hazard assessment.It is recommended that site investigation and soil improvement should be planned to counteract liquefaction damage before construction.This study also suggests conducting seismic hazard assessments for city development to minimise the potential disaster impact in the study area.展开更多
With the continuous advancement of unmanned technology in various application domains,the development and deployment of blind-spot-free panoramic video systems have gained increasing importance.Such systems are partic...With the continuous advancement of unmanned technology in various application domains,the development and deployment of blind-spot-free panoramic video systems have gained increasing importance.Such systems are particularly critical in battlefield environments,where advanced panoramic video processing and wireless communication technologies are essential to enable remote control and autonomous operation of unmanned ground vehicles(UGVs).However,conventional video surveillance systems suffer from several limitations,including limited field of view,high processing latency,low reliability,excessive resource consumption,and significant transmission delays.These shortcomings impede the widespread adoption of UGVs in battlefield settings.To overcome these challenges,this paper proposes a novel multi-channel video capture and stitching system designed for real-time video processing.The system integrates the Speeded-Up Robust Features(SURF)algorithm and the Fast Library for Approximate Nearest Neighbors(FLANN)algorithm to execute essential operations such as feature detection,descriptor computation,image matching,homography estimation,and seamless image fusion.The fused panoramic video is then encoded and assembled to produce a seamless output devoid of stitching artifacts and shadows.Furthermore,H.264 video compression is employed to reduce the data size of the video stream without sacrificing visual quality.Using the Real-Time Streaming Protocol(RTSP),the compressed stream is transmitted efficiently,supporting real-time remote monitoring and control of UGVs in dynamic battlefield environments.Experimental results indicate that the proposed system achieves high stability,flexibility,and low latency.With a wireless link latency of 30 ms,the end-to-end video transmission latency remains around 140 ms,enabling smooth video communication.The system can tolerate packet loss rates(PLR)of up to 20%while maintaining usable video quality(with latency around 200 ms).These properties make it well-suited for mobile communication scenarios demanding high real-time video performance.展开更多
This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SE...This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.展开更多
A novel white-light emitting single-phase phosphor La_3 Si_6 N_(11):Dy^(3+),exhibiting two emission peaks centering at 475 and 575 nm, was prepared via conventional solid-state reactions. The structure and morphology ...A novel white-light emitting single-phase phosphor La_3 Si_6 N_(11):Dy^(3+),exhibiting two emission peaks centering at 475 and 575 nm, was prepared via conventional solid-state reactions. The structure and morphology of La_3 Si_6 N_(11):Dy^(3+)/Tb^(3+) were investigated by X-ray diffraction(XRD) and scanning electron microscopy(SEM). The emission colors can be tuned from white to yellow-green through increasing the Tb^(3+) concentration in La_3 Si_6 N_(11):Dy^(3+),Tb^(3+), The mechanism of energy transfer(ET) from Dy^(3+) to Tb^(3+) is confirmed according to the excitation,emission spectra and decay lifetimes curve. The temperaturedependent luminescence measurements of La_(2.83)Si_6 N_(11):0.1 Dy^(3+),0.07 Tb^(3+) were also performed, and a good thermal stability is shown, suggesting superior properties for the application as white lightemitting diodes(w-LEDs) phosphor.展开更多
The microstructure,mechanical property,and in vitro biocorrosion behavior of as-cast single-phase biodegradable Mg-1.5Zn-0.6Zr alloy were investigated and compared with a commercial as-cast AZ91D alloy.The results sho...The microstructure,mechanical property,and in vitro biocorrosion behavior of as-cast single-phase biodegradable Mg-1.5Zn-0.6Zr alloy were investigated and compared with a commercial as-cast AZ91D alloy.The results show that the Mg-1.5Zn-0.6Zr alloy had a single-phase solid solution structure,with an average grain size of 34.7±13.1μm.The alloy exhibited ultimate tensile strength of 168±2.0 MPa,yield strength of 83±0.6 MPa,and elongation of 9.1±0.6%.Immersion tests and electrochemical measurements reveal that the alloy displayed lower biocorrosion rate and more uniform corrosion mode than AZ91D in Hank's solution.The elimination of intensive galvanic corrosion reactions and the formation of a much more compact and uniform corrosion film mainly account for the better biocorrosion properties of the Mg-1.5Zn-0.6Zr alloy than AZ91D.展开更多
This study focuses on the effects of rotational and welding speeds on the microstructure and hardness of joints in friction stir welded single-phase brass. Welds were achieved under low heat input conditions at rotati...This study focuses on the effects of rotational and welding speeds on the microstructure and hardness of joints in friction stir welded single-phase brass. Welds were achieved under low heat input conditions at rotational and welding speeds of 400-800 r/min and 100-300 mm/min, respectively. In order to characterize the obtained welds, optical microscopy and Vickers hardness measurements were taken on the weld cross sections. According to the obtained results, increasing the welding speed and/or decreasing the rotational speed caused the grain size of the stir zone to decrease and, hence, improved the average hardness of this region. These results are discussed with respect to the interplay between the welding parameters and the peak temperature in the weld thermal cycle.展开更多
基金supported by the Science and Technology Program of China Southern Power Grid(031800KC23120003).
文摘In contemporary medium-voltage distribution networks heavily penetrated by distributed energy resources(DERs),the harmonic components injected by power-electronic interfacing converters,together with the inherently intermittent output of renewable generation,distort the zero-sequence current and continuously reshape its frequency spectrum.As a result,single-line-to-ground(SLG)faults exhibit a pronounced,strongly non-stationary behaviour that varies with operating point,load mix and DER dispatch.Under such circumstances the performance of traditional rule-based algorithms—or methods that rely solely on steady-state frequency-domain indicators—degrades sharply,and they no longer satisfy the accuracy and universality required by practical protection systems.To overcome these shortcomings,the present study develops an SLG-fault identification scheme that transforms the zero-sequence currentwaveforminto two-dimensional image representations and processes themwith a convolutional neural network(CNN).First,the causes of sample-distribution imbalance are analysed in detail by considering different neutralgrounding configurations,fault-inception mechanisms and the statistical probability of fault occurrence on each phase.Building on these insights,a discriminator network incorporating a Convolutional Block Attention Module(CBAM)is designed to autonomously extract multi-layer spatial-spectral features,while Gradient-weighted Class Activation Mapping(Grad-CAM)is employed to visualise the contribution of every salient image region,thereby enhancing interpretability.A comprehensive simulation platform is subsequently established for a DER-rich distribution system encompassing several representative topologies,feeder lengths and DER penetration levels.Large numbers of realistic SLG-fault scenarios are generated—including noise and measurement uncertainty—and are used to train,validate and test the proposed model.Extensive simulation campaigns,corroborated by field measurements from an actual utility network,demonstrate that the proposed approach attains an SLG-fault identification accuracy approaching 100 percent and maintains robust performance under severe noise conditions,confirming its suitability for real-world engineering applications.
基金The financial support from the National Natural Science Foundation of China (No. 51107143)
文摘The way of neutral point to earth via full compensation arc suppression coil can solve the problem of residual current compensation in coal mine power network effectively. Based on the analysis on the grounding current detection results of Xieqiao coal mine, the conclusion that harmonic component of grounding current is dominated by higher harmonics with complex harmonic sources in coal mine power network system was obtained. The influences of harmonic source type and fault point position on harmonic voltage and harmonic current were analyzed theoretically. The influences of earthed fault feeder detection result and the estimation errors of parameters to earth on residual current compensation were analyzed. A new thought of residual current prediction and the selections of model method and control method were proposed on this basis. The simulation results prove that harmonic amplitudes of zero sequence voltage and zero sequence current are determined by harmonic source type as well as fault point position in coal mine power network, and also prove that zero sequence voltage detection can avoid the unstable problem of coal mine power network system caused by undercompensation of capacitive current. Finally, the experimental device of full compensation arc suppression coil is introduced.
基金supported in part by the National Natural Science Foundation of China (No. 51677072)。
文摘To address the problems of wind power abandonment and the stoppage of electricity transmission caused by a short circuit in a power line of a doubly-fed induction generator(DFIG) based wind farm, this paper proposes an intelligent location method for a single-phase grounding fault based on a multiple random forests(multi-RF) algorithm. First, the simulation model is built, and the fundamental amplitudes of the zerosequence currents are extracted by a fast Fourier transform(FFT) to construct the feature set. Then, the random forest classification algorithm is applied to establish the fault section locator. The model is resampled on the basis of the bootstrap method to generate multiple sample subsets, which are used to establish multiple classification and regression tree(CART) classifiers. The CART classifiers use the mean decrease in the node impurity as the feature importance,which is used to mine the relationship between features and fault sections. Subsequently, a fault section is identified by voting on the test results for each classifier. Finally, a multi-RF regression fault locator is built to output the predicted fault distance. Experimental results with PSCAD/EMTDC software show that the proposed method can overcome the shortcomings of a single RF and has the advantage of locating a short hybrid overhead/cable line with multiple branches. Compared with support vector machines(SVMs)and previously reported methods, the proposed method can meet the location accuracy and efficiency requirements of a DFIG-based wind farm better.
基金supported in part by National Key Research and Development Program of China(2016YFB0900603)Technology Projects of State Grid Corporation of China(52094017000W).
文摘Definite-time zero-sequence over-current protection is presently used in systems whose neutral point is grounded by a low resistance(low-resistance grounding systems).These systems frequently malfunction owing to their high settings of the action value when a high-impedance grounding fault occurs.In this study,the relationship between the zero-sequence currents of each feeder and the neutral branch was analyzed.Then,a grounding protection method was proposed on the basis of the zero-sequence current ratio coefficient.It is defined as the ratio of the zero-sequence current of the feeder to that of the neutral branch.Nonetheless,both zero-sequence voltage and zero-sequence current are affected by the transition resistance,The influence of transition resistance can be eliminated by calculating this coefficient.Therefore,a method based on the zero-sequence current ratio coefficient was proposed considering the significant difference between the faulty feeder and healthy feeder.Furthermore,unbalanced current can be prevented by setting the starting current.PSCAD simulation results reveal that the proposed method shows high reliability and sensitivity when a high-resistance grounding fault occurs.
基金Project supported by National Natural Science Foundation of China(62075203,12304460)Zhejiang Provincial Natural Science Foundation of China(LQ23A040007)Basic Public Welfare Research Program of Zhejiang Province(LDT23F05013F05)。
文摘Due to the wide and adjustable emission range,Ce^(3+)is an indispensable luminous center for full spectrum lighting.However,it needs to be sintered at high temperature in a reducing atmosphere,resulting in difficulty to coexisting with other multivalent activated ions(such as Eu^(3+),Tm^(3+)),which greatly hinders the formation of full spectrum.In this study,a calcium vacancy enhanced self-reduction of Ce^(4+)is realized in CaNaSb_(2)O_(6)F(CNSOF)host under air atmosphere sintering,through which Ce^(3+),Tm^(3+)and Eu^(3+)coexisting in a single-phase full spectrum phosphor was prepared.Notably,the artificial introduction of a calcium vacancy was designed to verify this self-reduction mechanism.Moreover,the energy transfer kinetics among Tm^(3+),Ce^(3+)and Eu^(3+)were explored.Finally,combined with a 340 nm UV chip,a full spectrum phosphor-converted light-emitting diode(pc-LED)was fabricated,showing a broad emission range from 400 to 750 nm,Commission Internationale de I'Edairage(CIE)of(0.3485,0.3673),Ra of 92 and correlated color temperature(CCT)of 4933 K.Utilizing the variation in emission colors of this phosphor under different UV wavelengths,a dual encryption method combining point character code and fluorescent encryption technique is proposed.This work provides an effective path for Ce^(4+)self-reduction to apply in full spectrum pc-LED and information encryption.
文摘It is important for the safety of transmission system to accurately calculate single-phase earth fault current distribution.Features of double sided elimination method were illustrated.Quantitative calculation of single-phase earth fault current distribution and case verification were accomplished by using the loop method.Influences of some factors,such as single-phase earth fault location and ground resistance of poles,on short-circuit current distribution were discussed.Results show that:1) results of the loop method conform to those of double sided elimination method;2) the fault location hardly influences macro-distribution of short-circuit current.However,current near fault location is evidently influenced;and 3) the short-circuit current distribution is not so sensitive to the ground resistance of poles.
文摘In order to increase the stability of the Mongolia power system, a single-phase automatic reclosing device (SPAR) was introduced on double-circuit power lines built with a size of 330 kV, operating on a voltage of 220 kV and a length of 250 km. These overhead power lines (L-213, L-214) connect the 220/110/35 kV “Songino” substation with the “Mandal” substation and form system networks. This paper presents the challenges encountered when implementing single-phase automatic reclosing (SPAR) devices and compares the changes in power system parameters before and after SPAR deployment for a long 220 kV line. Simulations and analyses were carried out using DIgSILENT PowerFactory software, focusing on rotor angle stability, and the overall impact on the power system during short-circuit faults. The evaluation also utilized measurement data from the Wide Area Monitoring System (WAMS) to compare system behavior pre- and post-implementation of SPAR. The findings reveal that SPAR significantly enhances system reliability and stability, effectively mitigating the risk of oscillations and stability loss triggered by short circuits. This improvement contributes to a more resilient power system, reducing the potential for disturbances caused by faults.
基金National Natural Science Foundation of China(42575091)Marine Meteorological Science and Data Center Program (2024B1212070014)。
文摘In this study, the ground potential rise(GPR) phenomenon caused by a lightning current injected into a field-shaped artificial grounding grid, as well as the potential difference between two different nodes at the edge of the grounding grid, was observed and analyzed under artificially triggered lightning conditions. Based on circuit theory and measured current data, a π-equivalent circuit was established to simulate the transient response of the grounding grid.Nineteen return strokes from three artificially triggered lightning events were analyzed. The peak currents of the 19 return strokes range from -6.7 to -25.1 kA, and the mean value was -14.3 kA. The GPR decreased rapidly and formed a subpeak after reaching the initial peak, with the mean value of the initial peak being -148.65 kV and the mean value of the subpeak being -92.87 kV. The GPR induced by the triggered lightning currents exhibited a subpeak phenomenon. Simulation results indicate that the subpeak phenomenon is related to localized corrosion of the vertical grounding electrode. The potential difference at the grounding grid edge exhibited a multi-pulse waveform with alternating polarity, dominated by positive pulses. The peak values of both the positive and negative polarity pulses gradually decreased, with the first positive pulse displaying a significantly higher intensity than that of subsequent pulses.
基金funding support from the National Natural Science Foundation of China(Nos.52304101 and 52204153)the China Postdoctoral Science Foundation(No.2023MD734215)+2 种基金the Youth Talent Support Program of Xi’an Association for Science and Technology(No.959202413070)the Key Research and Development Program of Shaanxi(No.2023-LL-QY-07)the Key Research and Development Program of Zhejiang(No.2023C03182).
文摘Backfill is routinely adopted as a ground support measure for underground mines.However,ground stability enhancement by backfill has received limited research attention.This is likely to be because of the conventional assumption that the fill material exhibits a significantly lower stiffness than the host rocks.Significantly,a recent pioneering work revealed the time-dependent ground stability around a backfilled stope with vertical walls through numerical modeling.In practice,underground stopes typically exhibit a higher or lower degree of inclination.This alters the stress state in peripheral rocks and may induce severe instability and dilution,particularly in stope-hanging walls.Hence,it is imperative to analyze the time-dependent ground stability of inclined backfilled stopes for backfill structure design.Therefore,comprehensive numerical simulations were performed using FLAC3D to address this knowledge deficiency by incorporating a coupled analysis of the backfill consolidation behavior and long-term creep deformation in surrounding rocks.The ground stability was evaluated based on the confinement effectiveness,strength-stress ratio,stress path relative to the yield surface,and time-dependent stress redistribution in the rocks.A parametric study revealed that the inclination angle of the backfilled stope reduced the confinement effectiveness in the host rocks when the wall creep was minor.This exacerbated the rock mass sloughing potential.However,a backfilled stope with a shallower dip angle achieved superior ground stability enhancement when the creep deformation was substantial,by applying a more significant compression on the backfill and effectively mobilizing its passive support performance during consolidation.Additional simulations were conducted to analyze the effects of stope height and width,mine depth,mechanical properties of rocks,backfill compressibility,and filling gap on the time-dependent stress redistribution and stability around the inclined backfilled stope.
基金supported in part by 14th Five Year National Key R&D Program Project(Project Number:2023YFB3211001)the National Natural Science Foundation of China(62273339,U24A201397).
文摘Rapidly-exploring Random Tree(RRT)and its variants have become foundational in path-planning research,yet in complex three-dimensional off-road environments their uniform blind sampling and limited safety guarantees lead to slow convergence and force an unfavorable trade-off between path quality and traversal safety.To address these challenges,we introduce HS-APF-RRT*,a novel algorithm that fuses layered sampling,an enhanced Artificial Potential Field(APF),and a dynamic neighborhood-expansion mechanism.First,the workspace is hierarchically partitioned into macro,meso,and micro sampling layers,progressively biasing random samples toward safer,lower-energy regions.Second,we augment the traditional APF by incorporating a slope-dependent repulsive term,enabling stronger avoidance of steep obstacles.Third,a dynamic expansion strategy adaptively switches between 8 and 16 connected neighborhoods based on local obstacle density,striking an effective balance between search efficiency and collision-avoidance precision.In simulated off-road scenarios,HS-APF-RRT*is benchmarked against RRT*,GoalBiased RRT*,and APF-RRT*,and demonstrates significantly faster convergence,lower path-energy consumption,and enhanced safety margins.
文摘Honeycombing Lung(HCL)is a chronic lung condition marked by advanced fibrosis,resulting in enlarged air spaces with thick fibrotic walls,which are visible on Computed Tomography(CT)scans.Differentiating between normal lung tissue,honeycombing lungs,and Ground Glass Opacity(GGO)in CT images is often challenging for radiologists and may lead to misinterpretations.Although earlier studies have proposed models to detect and classify HCL,many faced limitations such as high computational demands,lower accuracy,and difficulty distinguishing between HCL and GGO.CT images are highly effective for lung classification due to their high resolution,3D visualization,and sensitivity to tissue density variations.This study introduces Honeycombing Lungs Network(HCL Net),a novel classification algorithm inspired by ResNet50V2 and enhanced to overcome the shortcomings of previous approaches.HCL Net incorporates additional residual blocks,refined preprocessing techniques,and selective parameter tuning to improve classification performance.The dataset,sourced from the University Malaya Medical Centre(UMMC)and verified by expert radiologists,consists of CT images of normal,honeycombing,and GGO lungs.Experimental evaluations across five assessments demonstrated that HCL Net achieved an outstanding classification accuracy of approximately 99.97%.It also recorded strong performance in other metrics,achieving 93%precision,100%sensitivity,89%specificity,and an AUC-ROC score of 97%.Comparative analysis with baseline feature engineering methods confirmed the superior efficacy of HCL Net.The model significantly reduces misclassification,particularly between honeycombing and GGO lungs,enhancing diagnostic precision and reliability in lung image analysis.
基金supported by the Earthquake Science and Technology Spark Plan Project(No.XH23041C)The Natural Science Foundation of Gansu Province(No.22JR11RA090)Gansu Lanzhou Geophysics National Observation and Research Station(No.2021Y14).
文摘The widely distributed loess deposits in the Yellow River Basin exhibit unique engineering geological characteristics.The variations in their thickness and stratigraphic structure significantly amplify ground motion parameters,directly influencing the regional seismic hazard risk level.This study methodically conducted on-site studies and observations of building collapses and damages resulting from seismic amplification effects,using the Wenchuan M_(S)8.0 earthquake as a case study.Comprehensive experimental and numerical simulation studies were carried out.A large-scale shaking table test was performed,and numerical models for 14 different loess sites types were established.Various types of seismic waves were incorporated into these models for systematic numerical simulation calculations.The research reveals the mechanisms by which loess deposit thickness and stratigraphic structure in the Yellow River Basin affect seismic ground motion amplification.The results indicate that as the epicentral distance increases,the peak ground motion shows a marked attenuation trend,with the horizontal component attenuating substantially faster than the vertical component.As the overlying loess layer thickness increases from 50 to 100 m,the seismic intensity may escalate by 3−4 degrees,and the peak acceleration may amplify by 1.5−2.2 times.With the augmentation of loess deposit thickness and the proliferation of soil layers,both the peak acceleration response spectrum and the characteristic period demonstrate an upward tendency,exhibiting slight fluctuations contingent upon the seismic wave type.
基金support of the National Natural Science Foundation of China(Grant Nos.52179116 and 51991392)the support of Key Deployment Projects of Chinese Academy of Sciences(Grant No.ZDRW-ZS-2021-3).
文摘Shield tunneling in saturated ground poses challenges due to the potential risk of ground collapse resulting from seepage force and inadequate support pressure.This study employed a laboratory model test and a theoretical validation to elucidate the mechanisms of face failure and subsequent ground collapse in saturated ground during slurry pressure-balanced shield(SPBS)tunneling operations.A slurry circulation system was developed to ensure steady shield tunneling and to replicate the phenomena of ground collapse.Investigations into shield tunneling parameters and ground responses,including soil pressure,pore water pressure,and surface subsidence,were conducted to understand the mechanisms of face failure and subsequent ground collapse.The theoretical solution for the critical collapse pressure of the tunnel face,based on the rotational failure mechanism,was validated through the comparison with the experimentally determined critical collapse pressure.The results indicate that:(1)appropriate adjustments of tunneling parameters are crucial for promoting filtercake formation,maintaining chamber pressure,and minimizing ground subsidence;(2)chamber pressure,soil pressure,pore water pressure,and ground subsidence are closely correlated with shield tunneling parameters and the formation of filter cake;(3)ground collapse follows a continuous failure mode due to the destruction of filtercake and the decrease in chamber pressure;(4)the soil pressure at the cutterhead is more sensitive to disturbances from shield tunneling than chamber pressure;and(5)experimentally determined critical collapse pressures is consistent with the theoretical solution of limit analysis.
基金The World Class Professor(WCP)Program of the Directorate of Resources,Directorate General of Higher Education,Ministry of Education and Culture in 2023 supports this studythe JAPAN-ASEAN Science and Technology Innovation Platform(JASTIP-WP4)+3 种基金the University of Bengkulu's International Collaboration Research Fund(2183/UN30.15/LT/2019)for partial fundingthe C2F Fund for Postdoctoral Fellowship from Chulalongkorn Universitythe Thailand Science Research and Innovation Fund Chulalongkorn University(DISF68210001)the National Research Council of Thailand(N42A670572)。
文摘The research findings on the ground motion and liquefaction potential analyses during the 2018 Great Indonesia Earthquake(M_(w)7.5)are significant and crucial.The earthquake triggered soil-structure damage due to liquefaction.This study,which thoroughly investigated four sites at Palu,was conducted by performing a comprehensive ground motion parameter analysis.The ground motion characteristics were presented and justified,particularly for the most impacted direction.Ground motion predictions were analysed to define the spectral accelerations,and matching spectral accelerations were conducted to produce ground motions for each site.Non-linear seismic ground response analysis based on the hyperbolic model of pressure pressure-dependent was performed to investigate cyclic soil behaviour.The results revealed that ground motion is crucial in significant soil damage,and the earthquake energy could trigger deep liquefaction.As the most significant ground motion,the vertical ground motion is essential in determining deep liquefaction.The discussion on the impact of liquefaction based on the results of the numerical analysis is presented.Significant ground motion with a longer duration could have a substantial impact on deep liquefaction in the study area.These findings depict how the 2018 Indonesia Earthquake(M_(w)7.5)triggered a mega-liquefaction in Palu City.The results could enhance the understanding of the importance of seismic hazard assessment.It is recommended that site investigation and soil improvement should be planned to counteract liquefaction damage before construction.This study also suggests conducting seismic hazard assessments for city development to minimise the potential disaster impact in the study area.
基金supported by the National Natural Science Foundation of China(Grant No.72334003)the National Key Research and Development Program of China(Grant No.2022YFB2702804)+1 种基金the Shandong Key Research and Development Program(Grant No.2020ZLYS09)the Jinan Program(Grant No.2021GXRC084-2).
文摘With the continuous advancement of unmanned technology in various application domains,the development and deployment of blind-spot-free panoramic video systems have gained increasing importance.Such systems are particularly critical in battlefield environments,where advanced panoramic video processing and wireless communication technologies are essential to enable remote control and autonomous operation of unmanned ground vehicles(UGVs).However,conventional video surveillance systems suffer from several limitations,including limited field of view,high processing latency,low reliability,excessive resource consumption,and significant transmission delays.These shortcomings impede the widespread adoption of UGVs in battlefield settings.To overcome these challenges,this paper proposes a novel multi-channel video capture and stitching system designed for real-time video processing.The system integrates the Speeded-Up Robust Features(SURF)algorithm and the Fast Library for Approximate Nearest Neighbors(FLANN)algorithm to execute essential operations such as feature detection,descriptor computation,image matching,homography estimation,and seamless image fusion.The fused panoramic video is then encoded and assembled to produce a seamless output devoid of stitching artifacts and shadows.Furthermore,H.264 video compression is employed to reduce the data size of the video stream without sacrificing visual quality.Using the Real-Time Streaming Protocol(RTSP),the compressed stream is transmitted efficiently,supporting real-time remote monitoring and control of UGVs in dynamic battlefield environments.Experimental results indicate that the proposed system achieves high stability,flexibility,and low latency.With a wireless link latency of 30 ms,the end-to-end video transmission latency remains around 140 ms,enabling smooth video communication.The system can tolerate packet loss rates(PLR)of up to 20%while maintaining usable video quality(with latency around 200 ms).These properties make it well-suited for mobile communication scenarios demanding high real-time video performance.
基金National Natural Science Foundation of China under Grant Nos.U2139208 and 52278516Key Laboratory of Earthquake Engineering and Engineering Vibration,China Earthquake Administration under Grant No.2024D15Key Laboratory of Soft Soil Characteristic and Engineering Environment,Tianjin Chengjian University under Grant No.2022SCEEKL003。
文摘This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.
基金supported by the National Key Research and Development Plan(2017YFB0404300,2017YFB0404301)
文摘A novel white-light emitting single-phase phosphor La_3 Si_6 N_(11):Dy^(3+),exhibiting two emission peaks centering at 475 and 575 nm, was prepared via conventional solid-state reactions. The structure and morphology of La_3 Si_6 N_(11):Dy^(3+)/Tb^(3+) were investigated by X-ray diffraction(XRD) and scanning electron microscopy(SEM). The emission colors can be tuned from white to yellow-green through increasing the Tb^(3+) concentration in La_3 Si_6 N_(11):Dy^(3+),Tb^(3+), The mechanism of energy transfer(ET) from Dy^(3+) to Tb^(3+) is confirmed according to the excitation,emission spectra and decay lifetimes curve. The temperaturedependent luminescence measurements of La_(2.83)Si_6 N_(11):0.1 Dy^(3+),0.07 Tb^(3+) were also performed, and a good thermal stability is shown, suggesting superior properties for the application as white lightemitting diodes(w-LEDs) phosphor.
基金This project was supported by the National Natural Science Foundation of China(No.51174025)Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20110006130004).
文摘The microstructure,mechanical property,and in vitro biocorrosion behavior of as-cast single-phase biodegradable Mg-1.5Zn-0.6Zr alloy were investigated and compared with a commercial as-cast AZ91D alloy.The results show that the Mg-1.5Zn-0.6Zr alloy had a single-phase solid solution structure,with an average grain size of 34.7±13.1μm.The alloy exhibited ultimate tensile strength of 168±2.0 MPa,yield strength of 83±0.6 MPa,and elongation of 9.1±0.6%.Immersion tests and electrochemical measurements reveal that the alloy displayed lower biocorrosion rate and more uniform corrosion mode than AZ91D in Hank's solution.The elimination of intensive galvanic corrosion reactions and the formation of a much more compact and uniform corrosion film mainly account for the better biocorrosion properties of the Mg-1.5Zn-0.6Zr alloy than AZ91D.
文摘This study focuses on the effects of rotational and welding speeds on the microstructure and hardness of joints in friction stir welded single-phase brass. Welds were achieved under low heat input conditions at rotational and welding speeds of 400-800 r/min and 100-300 mm/min, respectively. In order to characterize the obtained welds, optical microscopy and Vickers hardness measurements were taken on the weld cross sections. According to the obtained results, increasing the welding speed and/or decreasing the rotational speed caused the grain size of the stir zone to decrease and, hence, improved the average hardness of this region. These results are discussed with respect to the interplay between the welding parameters and the peak temperature in the weld thermal cycle.
