To clarify fluid flow mechanisms and establish effective development conditions in continental shale oil reservoirs,a high-temperature,high-pressure steady-state flow system integrated with nuclear magnetic resonance(...To clarify fluid flow mechanisms and establish effective development conditions in continental shale oil reservoirs,a high-temperature,high-pressure steady-state flow system integrated with nuclear magnetic resonance(NMR)technology has been developed.The apparatus combines sample evacuation,rapid pressurization and saturation,and controlled displacement,enabling systematic investigation of single-phase shale oil flow under representative reservoir conditions.Related experiments allow proper quantification of the activation thresholds and relative contributions of different pore types to flow.A movable fluid index(MFI),defined using dual T_(2) cutoff values,is introduced accordingly and linked to key flow parameters.The results reveal distinct multi-scale characteristics of single-phase shale oil transport,namely micro-scale graded displacement and macro-scale segmented nonlinear behavior.As the injection-production pressure difference increases,flow pathways are activated progressively,beginning with fractures,followed by large and then smaller macropores,leading to a pronounced enhancement in apparent permeability.Although mesopores and micropores contribute little to direct flow,their indirect influence becomes increasingly important,and apparent permeability gradually approaches a stable limit at higher pressure difference.It is also shown that the MFI exhibits a strong negative correlation with the starting pressure gradient and a positive correlation with apparent permeability,providing a rapid and reliable indicator of shale oil flow capacity.Samples containing through-going fractures display consistently higher MFI values and superior flowability compared with those dominated by laminated fractures,highlighting the pivotal role of well-connected fracture networks generated by large-scale hydraulic fracturing in improving shale oil production.展开更多
A series of numerical simulations of turbulent single-phase flows are performed to understand the flow and mixing characteristics in a laboratory scale flotation tank.Four impeller blade shapes covering a wide range o...A series of numerical simulations of turbulent single-phase flows are performed to understand the flow and mixing characteristics in a laboratory scale flotation tank.Four impeller blade shapes covering a wide range of surface areas and lip lengths are considered to highlight and contrast the flow behavior predicted in the impeller stream.The mean flow close to the impeller is fully characterized by considering velocity components along the axial direction at different radial locations.Normalized results suggest the development of a comparatively stronger axial velocity component for a blade design with the smallest lip length,called big-tip impeller here.Normalized turbulent kinetic energy profiles close to the impeller reveal the existence of an asymmetric trailing vortex pair.The highest turbulence kinetic energy dissipation rates are observed close to the impeller blades and stator walls where the radial jet strikes the stator walls periodically.Furthermore,liquid phase mixing in the flotation cell is studied using transient scalar tracing simulations providing mixing time data.Finally,pumping capacity and efficiency of different impeller designs are calculated based on which the impeller blade design with a rectangular blade design is found to perform most efficiently.展开更多
Theoretical equations for computing sensitivity coefficients of wellbore pressures to estimate the reservoir parameters in low-permeability reservoirs conditioning to non-Darcy flow data at low velocity were obtained....Theoretical equations for computing sensitivity coefficients of wellbore pressures to estimate the reservoir parameters in low-permeability reservoirs conditioning to non-Darcy flow data at low velocity were obtained. It is shown by a lot of numerical calculations that the wellbore pressures are much more sensitive to permeability very near the well than to permeability a few gridblocks away from the well. When an initial pressure gradient existent sensitivity coefficients in the region are closer to the active well than to the observation well. Sensitivity coefficients of observation well at the line between the active well and the observation well are influenced greatly by the initial pressure gradient.展开更多
The current work aims to make a foundation for an engineering design of a cyclone gasifier to be able not only to predict its flow field with a suitable accuracy but also to investigate a large number of design altern...The current work aims to make a foundation for an engineering design of a cyclone gasifier to be able not only to predict its flow field with a suitable accuracy but also to investigate a large number of design alternatives with limited computer resources. A good single-phase flow model that can form the basis in an Euler-Lagrange model for multi-phase flow is also necessary?for modelling the reacting flow inside a cyclone gasifier. The present paper provides an objective comparison between several popular turbulence modelling options including standard k-ε and SST with curvature corrections, SSG-RSM and LES Smagorinsky models, for the single-phase flow inside cyclone separators/gasifiers that can serve as a guide for further work on the reacting multi-phase flow inside cyclone gasifiers and similar devices. A detailed comparison between the models and experimental data for the mean velocity and fluctuating parts of the velocity profiles are presented. Furthermore, the capabilities of the turbulence models to capture the physical phenomena present in a cyclone gasifier that?affects the design process are investigated.展开更多
Gas-liquid two-phase flow occurs increasingly in some dynamic devices operating in the oceanic condition. The relative data are limited with respect to flow characteristics, so the present study is to investigate syst...Gas-liquid two-phase flow occurs increasingly in some dynamic devices operating in the oceanic condition. The relative data are limited with respect to flow characteristics, so the present study is to investigate systematically single-phase pressure drop, and to develop the theory for frictional factor under the roiling condition. Using deionized water as the test fluid, a series of experiments of single-phase flow were conducted in pipe with the inner diameter of 34.5 ram. The test section was horizontally settled on the rolling apparatus, and its regularity was similar to simple harmonic motion. It is found that the pressure drop during rolling motion fluctuate with the change of the rolling period and rolling angle, which is significantly different from fluid motion in a steady state. By the contrast between experiment results and stable-state theory values, existing correlations can not predict present frictional factor very well. Therefore, in the present article, the single-phase frictional factor is correlated with the Reynolds number for rolling motion, and its computated results agree well with experimental data.展开更多
Dynamic behavior of coalbed methane (CBM) flow will provide the theoretical basis to optimize production performance for a given well.A mathematical model is developed to simulate flowing pressures and pressure drops ...Dynamic behavior of coalbed methane (CBM) flow will provide the theoretical basis to optimize production performance for a given well.A mathematical model is developed to simulate flowing pressures and pressure drops of CBM column from well head to bottom hole.The measured parameters and independent variables of flow rates,flowing pressures and temperatures are involved in CBM producing process along the annulus.The developed relationships are validated against full-scale measured data in single-phase CBM wellbores.The proposed methodology can analyze the dynamic behavior in CBM reservoir and process of CBM flow with an overall accuracy of 2%.The calculating process of flowing pressures involves friction factor with variable Reynolds number and CBM temperature and compressibility factor with gravitational gradients.The results showed that the effect of flowing pressure on CBM column was more obvious than that on CBM and water column accompanied by an increase of dynamic water level.The ratios of flowing pressure on increment of CBM column to the whole column increased with the declined flow rates of water column.Bottom-hole pressure declined with the decreased flowing pressure of CBM column along the annulus.It will lead to the results of the increased pressure drop of CBM column and CBM flow rate in single-phase CBM wellbores.展开更多
A single-phase lattice Boltzmann model with modified surface tension is developed in this paper to solve the problem of high-density-ratio free surface flow.The computational efficiency and accuracy are both enhanced....A single-phase lattice Boltzmann model with modified surface tension is developed in this paper to solve the problem of high-density-ratio free surface flow.The computational efficiency and accuracy are both enhanced.The restriction to the relaxation factor （which needs to be smaller than 1） is circumvented by the new surface tension algebra,due to its rational physical nature compared with the treatment of Xing,Buther and Yang in their paper （Comp.Mater.Sci.,2007,39（2）：282-290）.The proposed stable surface tension scheme is applied to simulate the free deformation of a square droplet with surface tension effect and the process of a droplet impinging on a liquid film.The numerical solution for free deformation of a droplet agrees well with thermodynamic principles,and also achieves high accuracy in comparison with Xing,et al.＇s model.Three typical impinging modes are successfully obtained with the new scheme,and another particular mode found by Wang and Chen is also successfully simulated.The evolutions of liquid crown agree well with the power law related to time.展开更多
Improved fluid dynamics can enhance the separation efficiency of flotation methods. A Computational Fluid Dynamics simulation using FLUENT was performed to model the fluid environment of a cyclonic-sta- tic micro bubb...Improved fluid dynamics can enhance the separation efficiency of flotation methods. A Computational Fluid Dynamics simulation using FLUENT was performed to model the fluid environment of a cyclonic-sta- tic micro bubble flotation column. The simulation results visually show the interior flow and illustrate mix- ing of the different flows within the apparatus. An analysis of the distribution in velocity and vorticity was used to analyze the separation mechanism and the synergism of the component parts and to strengthen the design of each unit. The conclusions are that axial back mixing and vortexes still exist in the separation unit even in the presence of packing media. The inverted cone structure near the tangential inlet （cone 1 ） within the cyclonic unit is the main reason for this. The cone 1 structure enhances swirling and focuses energy within the inner area of the cone where there are abundant bubbles. As a result slowly floating minerals are forcibly recovered and railings are effectively separated within this unit. However, cone 1 also reduces the vorticity downstream from it, which reduces the efficiency of railings separation within this part. Therefore, the design of cone 1 should be based on the principles of lessening disturbances to the column unit while strengthening the separation effect of the cyclonic unit. Also, the axial distance between the paired cyclonic structures at the bottom of the column （cone 2） and cone 1 poses tough requirements because of an interaction between separation of the middlings and railings.展开更多
A depth-averaged quasi single-phase mixture model is proposed for debris flows over inclined bed slopes based on the shallow water hydrosediment-morphodynamic theory with multi grain sizes. The stresses due to fluctua...A depth-averaged quasi single-phase mixture model is proposed for debris flows over inclined bed slopes based on the shallow water hydrosediment-morphodynamic theory with multi grain sizes. The stresses due to fluctuations are incorporated based on analogy to turbulent flows, as estimated using the depth-averaged k-? turbulence model and a modification component. A fully conservative numerical algorithm, using wellbalanced slope limited centred scheme, is deployed to solve the governing equations. The present quasi single-phase model using four closure relationships for the bed shear stresses is evaluated against USGS experimental debris flow and compared with traditional quasi single-phase models and a recent physically enhanced two-phase model. It is found that the present quasi single-phase model performs much better than the traditional models, and is attractive in terms of computational cost while the two-phase model performs even better appreciably.展开更多
Important in many different sectors of the industry, the determination of stream velocity has become more and more important due to measurements precision necessity, in order to determine the right production rates, d...Important in many different sectors of the industry, the determination of stream velocity has become more and more important due to measurements precision necessity, in order to determine the right production rates, determine the volumetric production of undesired fluid, establish automated controls based on these measurements avoiding over-flooding or over-production, guaranteeing accurate predictive maintenance, etc. Difficulties being faced have been the determination of the velocity of specific fluids embedded in some others, for example, determining the gas bubbles stream velocity flowing throughout liquid fluid phase. Although different and already applicable methods have been researched and already implemented within the industry, a non-intrusive automated way of providing those stream velocities has its importance, and may have a huge impact in projects budget. Knowing the importance of its determination, this developed script uses a methodology of breaking-down real-time videos media into frame images, analyzing by pixel correlations possible superposition matches for further gas bubbles stream velocity estimation. In raw sense, the script bases itself in functions and procedures already available in MatLab, which can be used for image processing and treatments, allowing the methodology to be implemented. Its accuracy after the running test was of around 97% (ninety-seven percent);the raw source code with comments had almost 3000 (three thousand) characters;and the hardware placed for running the code was an Intel Core Duo 2.13 [Ghz] and 2 [Gb] RAM memory capable workstation. Even showing good results, it could be stated that just the end point correlations were actually getting to the final solution. So that, making use of self-learning functions or neural network, one could surely enhance the capability of the application to be run in real-time without getting exhaust by iterative loops.展开更多
Due to the wide and adjustable emission range,Ce^(3+)is an indispensable luminous center for full spectrum lighting.However,it needs to be sintered at high temperature in a reducing atmosphere,resulting in difficulty ...Due to the wide and adjustable emission range,Ce^(3+)is an indispensable luminous center for full spectrum lighting.However,it needs to be sintered at high temperature in a reducing atmosphere,resulting in difficulty to coexisting with other multivalent activated ions(such as Eu^(3+),Tm^(3+)),which greatly hinders the formation of full spectrum.In this study,a calcium vacancy enhanced self-reduction of Ce^(4+)is realized in CaNaSb_(2)O_(6)F(CNSOF)host under air atmosphere sintering,through which Ce^(3+),Tm^(3+)and Eu^(3+)coexisting in a single-phase full spectrum phosphor was prepared.Notably,the artificial introduction of a calcium vacancy was designed to verify this self-reduction mechanism.Moreover,the energy transfer kinetics among Tm^(3+),Ce^(3+)and Eu^(3+)were explored.Finally,combined with a 340 nm UV chip,a full spectrum phosphor-converted light-emitting diode(pc-LED)was fabricated,showing a broad emission range from 400 to 750 nm,Commission Internationale de I'Edairage(CIE)of(0.3485,0.3673),Ra of 92 and correlated color temperature(CCT)of 4933 K.Utilizing the variation in emission colors of this phosphor under different UV wavelengths,a dual encryption method combining point character code and fluorescent encryption technique is proposed.This work provides an effective path for Ce^(4+)self-reduction to apply in full spectrum pc-LED and information encryption.展开更多
In contemporary medium-voltage distribution networks heavily penetrated by distributed energy resources(DERs),the harmonic components injected by power-electronic interfacing converters,together with the inherently in...In contemporary medium-voltage distribution networks heavily penetrated by distributed energy resources(DERs),the harmonic components injected by power-electronic interfacing converters,together with the inherently intermittent output of renewable generation,distort the zero-sequence current and continuously reshape its frequency spectrum.As a result,single-line-to-ground(SLG)faults exhibit a pronounced,strongly non-stationary behaviour that varies with operating point,load mix and DER dispatch.Under such circumstances the performance of traditional rule-based algorithms—or methods that rely solely on steady-state frequency-domain indicators—degrades sharply,and they no longer satisfy the accuracy and universality required by practical protection systems.To overcome these shortcomings,the present study develops an SLG-fault identification scheme that transforms the zero-sequence currentwaveforminto two-dimensional image representations and processes themwith a convolutional neural network(CNN).First,the causes of sample-distribution imbalance are analysed in detail by considering different neutralgrounding configurations,fault-inception mechanisms and the statistical probability of fault occurrence on each phase.Building on these insights,a discriminator network incorporating a Convolutional Block Attention Module(CBAM)is designed to autonomously extract multi-layer spatial-spectral features,while Gradient-weighted Class Activation Mapping(Grad-CAM)is employed to visualise the contribution of every salient image region,thereby enhancing interpretability.A comprehensive simulation platform is subsequently established for a DER-rich distribution system encompassing several representative topologies,feeder lengths and DER penetration levels.Large numbers of realistic SLG-fault scenarios are generated—including noise and measurement uncertainty—and are used to train,validate and test the proposed model.Extensive simulation campaigns,corroborated by field measurements from an actual utility network,demonstrate that the proposed approach attains an SLG-fault identification accuracy approaching 100 percent and maintains robust performance under severe noise conditions,confirming its suitability for real-world engineering applications.展开更多
In order to increase the stability of the Mongolia power system, a single-phase automatic reclosing device (SPAR) was introduced on double-circuit power lines built with a size of 330 kV, operating on a voltage of 220...In order to increase the stability of the Mongolia power system, a single-phase automatic reclosing device (SPAR) was introduced on double-circuit power lines built with a size of 330 kV, operating on a voltage of 220 kV and a length of 250 km. These overhead power lines (L-213, L-214) connect the 220/110/35 kV “Songino” substation with the “Mandal” substation and form system networks. This paper presents the challenges encountered when implementing single-phase automatic reclosing (SPAR) devices and compares the changes in power system parameters before and after SPAR deployment for a long 220 kV line. Simulations and analyses were carried out using DIgSILENT PowerFactory software, focusing on rotor angle stability, and the overall impact on the power system during short-circuit faults. The evaluation also utilized measurement data from the Wide Area Monitoring System (WAMS) to compare system behavior pre- and post-implementation of SPAR. The findings reveal that SPAR significantly enhances system reliability and stability, effectively mitigating the risk of oscillations and stability loss triggered by short circuits. This improvement contributes to a more resilient power system, reducing the potential for disturbances caused by faults.展开更多
To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator a...To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator at temperatures of 380-440℃and strain rates of 0.05-1 s^(−1).The Johnson-Cook model,Hensel-Spittel model,strain-compensated Arrhenius model,and critical fracture strain model were established.Results show that through the evaluation of the models using the correlation coefficient(R)and the average absolute relative error,the strain-compensated Arrhenius model can represent the flow behavior of the alloy more accurately.Shear bands are more pronounced in the as-homogenized specimens,whereas dynamic recrystallization is predominantly observed in as-rolled specimens.Fracture morphology analysis reveals that a mixed fracture mechanism is prevalent in the as-homogenized specimen,whereas a ductile fracture mechanism is predominant in the as-rolled specimen.The processing maps indicate that the unstable region is reduced in the as-rolled specimens compared with that in the as-homogenized specimens.The optimal hot working windows for the as-homogenized and as-rolled specimens are determined as 410-440℃/0.14-1 s^(−1)and 380-400℃/0.05-0.29 s^(−1),respectively.展开更多
Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of va...Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of vanadium species on conventional carbon electrodes remains a major limitation to their performance.We investigated the deposition of carbon black,carbon nanotubes,and electrochemically exfoliated graphene(Exf-Gr)onto thermally-activated carbon paper(ACP)by spray coating to increase the electrode electrocatalytic activity.The modified electrodes were characterized using scanning electron microscopy,X-ray diffraction,Raman spectroscopy,X-ray photoelectron microscopy,and surface area analysis,while their electrochemical properties were evaluated by cyclic voltammetry,electrochemical impedance spectroscopy,and singlecell VRFB testing.Among the modified electrodes,Exf-Gr/ACP had the best performance,achieving a 2.9-fold reduction in charge transfer resistance compared to pristine ACP and delivering 2.5 times the discharge capacity in single-cell tests.This improvement is attributed to Exf-Gr’s high surface area,favorable catalytic activity,and excellent dispersion on the ACP substrate.Surface modification with electrochemically exfoliated graphene is a highly effective strategy for improving the electrode performance in VRFB systems,with significant implications for large-scale energy storage.展开更多
Large-eddy simulation(LES)is conducted to study the statistical properties of mixed-phase turbulence induced by the breaking of bow waves in flow past a partially submerged plate.The simulation is performed using a fi...Large-eddy simulation(LES)is conducted to study the statistical properties of mixed-phase turbulence induced by the breaking of bow waves in flow past a partially submerged plate.The simulation is performed using a finite difference method,with the air-water interface captured by a coupled level-set and volume-of-fluid method.Four cases are conducted to investigate the effects of Froude number on turbulent statistics,including the mean velocity,turbulence kinetic energy,and turbulence mass flux(TMF),which is an additional unclosed term in the Reynolds-averaged momentum equation.The TMF,especially its vertical component,shows a complex behaviour with respect to the Froude number.This property of the TMF imposes high demands on the robustness of the closure model of TMF.The present LES data is further used to examine a closure model of the TMF production term,which shows a high correlation with the data obtained from LES.展开更多
Investigating the wind-sand flow response regularity in the longitudinal slope sections of desert highways provides a scientific basis for selecting the slope of desert roads.This study uses the Tengger Desert section...Investigating the wind-sand flow response regularity in the longitudinal slope sections of desert highways provides a scientific basis for selecting the slope of desert roads.This study uses the Tengger Desert section of the Wuhai-Maqin Expressway as a case study,employing CFD numerical simulation methods to calculate and analyze the wind-sand flow field distribution characteristics in different longitudinal slope sections.The results show that:(1)Along with the direction of the incoming flow,the windward and leeward slope toes of the embankment are low-wind-speed zones,with the wind speed at the leeward slope toe being even lower.The higher the embankment,the larger the low-wind-speed zone at the windward and leeward slope toes.As the longitudinal slope increases,the extent of the lowwind-speed zone at the same location along the route also increases.(2)Along the route direction,the wind speed at the windward and leeward slope toes decreases as embankment height increases.At the embankment toe,sand particles are transported from the top to the bottom of the longitudinal slope,and the greater the longitudinal slope,the stronger the transport effect.(3)Along the route direction,the sand accumulation around the embankment gradually gathers toward the bottom of the longitudinal slope as the slope increases.When the longitudinal slope is 3%and 4%,the trend of sand accumulation moving from the windward side at the end of the route to the leeward side at the start of the route is more significant.When the longitudinal slope is less than or equal to 3%,severe sand accumulation within the embankment range is reduced by 86.4%or more compared to when the slope is 4%.(4)Under the same longitudinal slope,the higher the embankment height,the smaller its transport rate.When the embankment height is the same,the greater the longitudinal slope,the greater the embankment transport rate.展开更多
The newly formulated non-Newtonian rivulet flows streaming down an inclined planar surface,with additional periodic perturbations arising from the application of the 2nd Stokes problem to the investigation of rivulet ...The newly formulated non-Newtonian rivulet flows streaming down an inclined planar surface,with additional periodic perturbations arising from the application of the 2nd Stokes problem to the investigation of rivulet dynamics,are demonstrated in the current research.Hereby,the 2nd Stokes problem assumes that the surface,with a thin shared layer of the fluid on it,oscillates in a harmonic manner along the x-axis of the rivulet flow,which coincides with the main flow direction streaming down the underlying surface.We obtain the exact extension of the rivulet flow family,clarifying the structure of the pressure field,which fully absorbs the arising perturbation.The profile of the velocity field is assumed to be Gaussian-type with a non-zero level of plasticity.Hence,the absolutely non-Newtonian case of the viscoplastic flow solution,which satisfies the motion and continuity equations,is considered(with particular cases of exact solutions for pressure).The perturbed governing equations of motion for rivulet flows then result in the Riccati-type ordinary differential equation(ODE),describing the dynamics of the coordinate x(t).The approximated schematic dynamics are presented in graphical plots.展开更多
基金supported by the National Science and Technology Major Project of China(Grant No.2024ZD 1004302)the Key Scientific and Technological Research project of SINOPEC(Grant No.P25186).
文摘To clarify fluid flow mechanisms and establish effective development conditions in continental shale oil reservoirs,a high-temperature,high-pressure steady-state flow system integrated with nuclear magnetic resonance(NMR)technology has been developed.The apparatus combines sample evacuation,rapid pressurization and saturation,and controlled displacement,enabling systematic investigation of single-phase shale oil flow under representative reservoir conditions.Related experiments allow proper quantification of the activation thresholds and relative contributions of different pore types to flow.A movable fluid index(MFI),defined using dual T_(2) cutoff values,is introduced accordingly and linked to key flow parameters.The results reveal distinct multi-scale characteristics of single-phase shale oil transport,namely micro-scale graded displacement and macro-scale segmented nonlinear behavior.As the injection-production pressure difference increases,flow pathways are activated progressively,beginning with fractures,followed by large and then smaller macropores,leading to a pronounced enhancement in apparent permeability.Although mesopores and micropores contribute little to direct flow,their indirect influence becomes increasingly important,and apparent permeability gradually approaches a stable limit at higher pressure difference.It is also shown that the MFI exhibits a strong negative correlation with the starting pressure gradient and a positive correlation with apparent permeability,providing a rapid and reliable indicator of shale oil flow capacity.Samples containing through-going fractures display consistently higher MFI values and superior flowability compared with those dominated by laminated fractures,highlighting the pivotal role of well-connected fracture networks generated by large-scale hydraulic fracturing in improving shale oil production.
文摘A series of numerical simulations of turbulent single-phase flows are performed to understand the flow and mixing characteristics in a laboratory scale flotation tank.Four impeller blade shapes covering a wide range of surface areas and lip lengths are considered to highlight and contrast the flow behavior predicted in the impeller stream.The mean flow close to the impeller is fully characterized by considering velocity components along the axial direction at different radial locations.Normalized results suggest the development of a comparatively stronger axial velocity component for a blade design with the smallest lip length,called big-tip impeller here.Normalized turbulent kinetic energy profiles close to the impeller reveal the existence of an asymmetric trailing vortex pair.The highest turbulence kinetic energy dissipation rates are observed close to the impeller blades and stator walls where the radial jet strikes the stator walls periodically.Furthermore,liquid phase mixing in the flotation cell is studied using transient scalar tracing simulations providing mixing time data.Finally,pumping capacity and efficiency of different impeller designs are calculated based on which the impeller blade design with a rectangular blade design is found to perform most efficiently.
文摘Theoretical equations for computing sensitivity coefficients of wellbore pressures to estimate the reservoir parameters in low-permeability reservoirs conditioning to non-Darcy flow data at low velocity were obtained. It is shown by a lot of numerical calculations that the wellbore pressures are much more sensitive to permeability very near the well than to permeability a few gridblocks away from the well. When an initial pressure gradient existent sensitivity coefficients in the region are closer to the active well than to the observation well. Sensitivity coefficients of observation well at the line between the active well and the observation well are influenced greatly by the initial pressure gradient.
基金The Bio4 Gasification and Bio4 Energy collaborations
文摘The current work aims to make a foundation for an engineering design of a cyclone gasifier to be able not only to predict its flow field with a suitable accuracy but also to investigate a large number of design alternatives with limited computer resources. A good single-phase flow model that can form the basis in an Euler-Lagrange model for multi-phase flow is also necessary?for modelling the reacting flow inside a cyclone gasifier. The present paper provides an objective comparison between several popular turbulence modelling options including standard k-ε and SST with curvature corrections, SSG-RSM and LES Smagorinsky models, for the single-phase flow inside cyclone separators/gasifiers that can serve as a guide for further work on the reacting multi-phase flow inside cyclone gasifiers and similar devices. A detailed comparison between the models and experimental data for the mean velocity and fluctuating parts of the velocity profiles are presented. Furthermore, the capabilities of the turbulence models to capture the physical phenomena present in a cyclone gasifier that?affects the design process are investigated.
基金supported by the National Natural Science Foundation of China (Grant No.50376012)supported by the Scientific Research Foundation of Harbin Engineering University (Grant No.HEUFT07066)
文摘Gas-liquid two-phase flow occurs increasingly in some dynamic devices operating in the oceanic condition. The relative data are limited with respect to flow characteristics, so the present study is to investigate systematically single-phase pressure drop, and to develop the theory for frictional factor under the roiling condition. Using deionized water as the test fluid, a series of experiments of single-phase flow were conducted in pipe with the inner diameter of 34.5 ram. The test section was horizontally settled on the rolling apparatus, and its regularity was similar to simple harmonic motion. It is found that the pressure drop during rolling motion fluctuate with the change of the rolling period and rolling angle, which is significantly different from fluid motion in a steady state. By the contrast between experiment results and stable-state theory values, existing correlations can not predict present frictional factor very well. Therefore, in the present article, the single-phase frictional factor is correlated with the Reynolds number for rolling motion, and its computated results agree well with experimental data.
基金This work was financially supported by National Science and Technology Major Project of the Ministry of Science and Technology of China(2016ZX05065-001),Key Research Project of Shandong Province(2019GHY112029 and 2019GSF109090)and Higher Education Research and Development Project of Shandong Province(J17KA033).
文摘Dynamic behavior of coalbed methane (CBM) flow will provide the theoretical basis to optimize production performance for a given well.A mathematical model is developed to simulate flowing pressures and pressure drops of CBM column from well head to bottom hole.The measured parameters and independent variables of flow rates,flowing pressures and temperatures are involved in CBM producing process along the annulus.The developed relationships are validated against full-scale measured data in single-phase CBM wellbores.The proposed methodology can analyze the dynamic behavior in CBM reservoir and process of CBM flow with an overall accuracy of 2%.The calculating process of flowing pressures involves friction factor with variable Reynolds number and CBM temperature and compressibility factor with gravitational gradients.The results showed that the effect of flowing pressure on CBM column was more obvious than that on CBM and water column accompanied by an increase of dynamic water level.The ratios of flowing pressure on increment of CBM column to the whole column increased with the declined flow rates of water column.Bottom-hole pressure declined with the decreased flowing pressure of CBM column along the annulus.It will lead to the results of the increased pressure drop of CBM column and CBM flow rate in single-phase CBM wellbores.
基金supported by the National Natural Science Foundation of China (Grant Nos.10625210,50609020 and 10902070)the Leading Academic Discipline Project of Shanghai Municipal Education Commission (Grant No.J50501)
文摘A single-phase lattice Boltzmann model with modified surface tension is developed in this paper to solve the problem of high-density-ratio free surface flow.The computational efficiency and accuracy are both enhanced.The restriction to the relaxation factor （which needs to be smaller than 1） is circumvented by the new surface tension algebra,due to its rational physical nature compared with the treatment of Xing,Buther and Yang in their paper （Comp.Mater.Sci.,2007,39（2）：282-290）.The proposed stable surface tension scheme is applied to simulate the free deformation of a square droplet with surface tension effect and the process of a droplet impinging on a liquid film.The numerical solution for free deformation of a droplet agrees well with thermodynamic principles,and also achieves high accuracy in comparison with Xing,et al.＇s model.Three typical impinging modes are successfully obtained with the new scheme,and another particular mode found by Wang and Chen is also successfully simulated.The evolutions of liquid crown agree well with the power law related to time.
基金supported by the National Natural Science Foundation of China (No. 51074157)the Foundation of China University of Mining and Technology (No. 2011QNA08)
文摘Improved fluid dynamics can enhance the separation efficiency of flotation methods. A Computational Fluid Dynamics simulation using FLUENT was performed to model the fluid environment of a cyclonic-sta- tic micro bubble flotation column. The simulation results visually show the interior flow and illustrate mix- ing of the different flows within the apparatus. An analysis of the distribution in velocity and vorticity was used to analyze the separation mechanism and the synergism of the component parts and to strengthen the design of each unit. The conclusions are that axial back mixing and vortexes still exist in the separation unit even in the presence of packing media. The inverted cone structure near the tangential inlet （cone 1 ） within the cyclonic unit is the main reason for this. The cone 1 structure enhances swirling and focuses energy within the inner area of the cone where there are abundant bubbles. As a result slowly floating minerals are forcibly recovered and railings are effectively separated within this unit. However, cone 1 also reduces the vorticity downstream from it, which reduces the efficiency of railings separation within this part. Therefore, the design of cone 1 should be based on the principles of lessening disturbances to the column unit while strengthening the separation effect of the cyclonic unit. Also, the axial distance between the paired cyclonic structures at the bottom of the column （cone 2） and cone 1 poses tough requirements because of an interaction between separation of the middlings and railings.
基金funded by Natural Science Foundation of China(Grants Nos.51279144 and 11432015)
文摘A depth-averaged quasi single-phase mixture model is proposed for debris flows over inclined bed slopes based on the shallow water hydrosediment-morphodynamic theory with multi grain sizes. The stresses due to fluctuations are incorporated based on analogy to turbulent flows, as estimated using the depth-averaged k-? turbulence model and a modification component. A fully conservative numerical algorithm, using wellbalanced slope limited centred scheme, is deployed to solve the governing equations. The present quasi single-phase model using four closure relationships for the bed shear stresses is evaluated against USGS experimental debris flow and compared with traditional quasi single-phase models and a recent physically enhanced two-phase model. It is found that the present quasi single-phase model performs much better than the traditional models, and is attractive in terms of computational cost while the two-phase model performs even better appreciably.
基金financial support from the Brazilian Federal Agency for Support and Evaluation of Graduate Education(Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior—CAPES,scholarship process no BEX 0506/15-0)the Brazilian National Agency of Petroleum,Natural Gas and Biofuels(Agencia Nacional do Petroleo,Gas Natural e Biocombustiveis—ANP),in cooperation with the Brazilian Financier of Studies and Projects(Financiadora de Estudos e Projetos—FINEP)the Brazilian Ministry of Science,Technology and Innovation(Ministério da Ciencia,Tecnologia e Inovacao—MCTI)through the ANP’s Human Resources Program of the State University of Sao Paulo(Universidade Estadual Paulista—UNESP)for the Oil and Gas Sector PRH-ANP/MCTI no 48(PRH48).
文摘Important in many different sectors of the industry, the determination of stream velocity has become more and more important due to measurements precision necessity, in order to determine the right production rates, determine the volumetric production of undesired fluid, establish automated controls based on these measurements avoiding over-flooding or over-production, guaranteeing accurate predictive maintenance, etc. Difficulties being faced have been the determination of the velocity of specific fluids embedded in some others, for example, determining the gas bubbles stream velocity flowing throughout liquid fluid phase. Although different and already applicable methods have been researched and already implemented within the industry, a non-intrusive automated way of providing those stream velocities has its importance, and may have a huge impact in projects budget. Knowing the importance of its determination, this developed script uses a methodology of breaking-down real-time videos media into frame images, analyzing by pixel correlations possible superposition matches for further gas bubbles stream velocity estimation. In raw sense, the script bases itself in functions and procedures already available in MatLab, which can be used for image processing and treatments, allowing the methodology to be implemented. Its accuracy after the running test was of around 97% (ninety-seven percent);the raw source code with comments had almost 3000 (three thousand) characters;and the hardware placed for running the code was an Intel Core Duo 2.13 [Ghz] and 2 [Gb] RAM memory capable workstation. Even showing good results, it could be stated that just the end point correlations were actually getting to the final solution. So that, making use of self-learning functions or neural network, one could surely enhance the capability of the application to be run in real-time without getting exhaust by iterative loops.
基金Project supported by National Natural Science Foundation of China(62075203,12304460)Zhejiang Provincial Natural Science Foundation of China(LQ23A040007)Basic Public Welfare Research Program of Zhejiang Province(LDT23F05013F05)。
文摘Due to the wide and adjustable emission range,Ce^(3+)is an indispensable luminous center for full spectrum lighting.However,it needs to be sintered at high temperature in a reducing atmosphere,resulting in difficulty to coexisting with other multivalent activated ions(such as Eu^(3+),Tm^(3+)),which greatly hinders the formation of full spectrum.In this study,a calcium vacancy enhanced self-reduction of Ce^(4+)is realized in CaNaSb_(2)O_(6)F(CNSOF)host under air atmosphere sintering,through which Ce^(3+),Tm^(3+)and Eu^(3+)coexisting in a single-phase full spectrum phosphor was prepared.Notably,the artificial introduction of a calcium vacancy was designed to verify this self-reduction mechanism.Moreover,the energy transfer kinetics among Tm^(3+),Ce^(3+)and Eu^(3+)were explored.Finally,combined with a 340 nm UV chip,a full spectrum phosphor-converted light-emitting diode(pc-LED)was fabricated,showing a broad emission range from 400 to 750 nm,Commission Internationale de I'Edairage(CIE)of(0.3485,0.3673),Ra of 92 and correlated color temperature(CCT)of 4933 K.Utilizing the variation in emission colors of this phosphor under different UV wavelengths,a dual encryption method combining point character code and fluorescent encryption technique is proposed.This work provides an effective path for Ce^(4+)self-reduction to apply in full spectrum pc-LED and information encryption.
基金supported by the Science and Technology Program of China Southern Power Grid(031800KC23120003).
文摘In contemporary medium-voltage distribution networks heavily penetrated by distributed energy resources(DERs),the harmonic components injected by power-electronic interfacing converters,together with the inherently intermittent output of renewable generation,distort the zero-sequence current and continuously reshape its frequency spectrum.As a result,single-line-to-ground(SLG)faults exhibit a pronounced,strongly non-stationary behaviour that varies with operating point,load mix and DER dispatch.Under such circumstances the performance of traditional rule-based algorithms—or methods that rely solely on steady-state frequency-domain indicators—degrades sharply,and they no longer satisfy the accuracy and universality required by practical protection systems.To overcome these shortcomings,the present study develops an SLG-fault identification scheme that transforms the zero-sequence currentwaveforminto two-dimensional image representations and processes themwith a convolutional neural network(CNN).First,the causes of sample-distribution imbalance are analysed in detail by considering different neutralgrounding configurations,fault-inception mechanisms and the statistical probability of fault occurrence on each phase.Building on these insights,a discriminator network incorporating a Convolutional Block Attention Module(CBAM)is designed to autonomously extract multi-layer spatial-spectral features,while Gradient-weighted Class Activation Mapping(Grad-CAM)is employed to visualise the contribution of every salient image region,thereby enhancing interpretability.A comprehensive simulation platform is subsequently established for a DER-rich distribution system encompassing several representative topologies,feeder lengths and DER penetration levels.Large numbers of realistic SLG-fault scenarios are generated—including noise and measurement uncertainty—and are used to train,validate and test the proposed model.Extensive simulation campaigns,corroborated by field measurements from an actual utility network,demonstrate that the proposed approach attains an SLG-fault identification accuracy approaching 100 percent and maintains robust performance under severe noise conditions,confirming its suitability for real-world engineering applications.
文摘In order to increase the stability of the Mongolia power system, a single-phase automatic reclosing device (SPAR) was introduced on double-circuit power lines built with a size of 330 kV, operating on a voltage of 220 kV and a length of 250 km. These overhead power lines (L-213, L-214) connect the 220/110/35 kV “Songino” substation with the “Mandal” substation and form system networks. This paper presents the challenges encountered when implementing single-phase automatic reclosing (SPAR) devices and compares the changes in power system parameters before and after SPAR deployment for a long 220 kV line. Simulations and analyses were carried out using DIgSILENT PowerFactory software, focusing on rotor angle stability, and the overall impact on the power system during short-circuit faults. The evaluation also utilized measurement data from the Wide Area Monitoring System (WAMS) to compare system behavior pre- and post-implementation of SPAR. The findings reveal that SPAR significantly enhances system reliability and stability, effectively mitigating the risk of oscillations and stability loss triggered by short circuits. This improvement contributes to a more resilient power system, reducing the potential for disturbances caused by faults.
文摘To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator at temperatures of 380-440℃and strain rates of 0.05-1 s^(−1).The Johnson-Cook model,Hensel-Spittel model,strain-compensated Arrhenius model,and critical fracture strain model were established.Results show that through the evaluation of the models using the correlation coefficient(R)and the average absolute relative error,the strain-compensated Arrhenius model can represent the flow behavior of the alloy more accurately.Shear bands are more pronounced in the as-homogenized specimens,whereas dynamic recrystallization is predominantly observed in as-rolled specimens.Fracture morphology analysis reveals that a mixed fracture mechanism is prevalent in the as-homogenized specimen,whereas a ductile fracture mechanism is predominant in the as-rolled specimen.The processing maps indicate that the unstable region is reduced in the as-rolled specimens compared with that in the as-homogenized specimens.The optimal hot working windows for the as-homogenized and as-rolled specimens are determined as 410-440℃/0.14-1 s^(−1)and 380-400℃/0.05-0.29 s^(−1),respectively.
基金supported by the University of Seoul’s 2025 Research Fund.
文摘Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of vanadium species on conventional carbon electrodes remains a major limitation to their performance.We investigated the deposition of carbon black,carbon nanotubes,and electrochemically exfoliated graphene(Exf-Gr)onto thermally-activated carbon paper(ACP)by spray coating to increase the electrode electrocatalytic activity.The modified electrodes were characterized using scanning electron microscopy,X-ray diffraction,Raman spectroscopy,X-ray photoelectron microscopy,and surface area analysis,while their electrochemical properties were evaluated by cyclic voltammetry,electrochemical impedance spectroscopy,and singlecell VRFB testing.Among the modified electrodes,Exf-Gr/ACP had the best performance,achieving a 2.9-fold reduction in charge transfer resistance compared to pristine ACP and delivering 2.5 times the discharge capacity in single-cell tests.This improvement is attributed to Exf-Gr’s high surface area,favorable catalytic activity,and excellent dispersion on the ACP substrate.Surface modification with electrochemically exfoliated graphene is a highly effective strategy for improving the electrode performance in VRFB systems,with significant implications for large-scale energy storage.
基金supported by the National Natural Science Foundation of China(NSFC)Basic Science Center Program for‘Multiscale Problems in Nonlinear Mechanics’(Grant No.11988102)NSFC project(Grant No.11972038)Chinese Academy of Sciences Project for Young Scientists in Basic Research(Grant No.YSBR-087).
文摘Large-eddy simulation(LES)is conducted to study the statistical properties of mixed-phase turbulence induced by the breaking of bow waves in flow past a partially submerged plate.The simulation is performed using a finite difference method,with the air-water interface captured by a coupled level-set and volume-of-fluid method.Four cases are conducted to investigate the effects of Froude number on turbulent statistics,including the mean velocity,turbulence kinetic energy,and turbulence mass flux(TMF),which is an additional unclosed term in the Reynolds-averaged momentum equation.The TMF,especially its vertical component,shows a complex behaviour with respect to the Froude number.This property of the TMF imposes high demands on the robustness of the closure model of TMF.The present LES data is further used to examine a closure model of the TMF production term,which shows a high correlation with the data obtained from LES.
基金financially supported by Youth Science“Research on Failure Mechanism and Evaluation Method of Sand Control Measures for Railway Machinery in Sandy Area”(12302511)Ningxia Transportation Department Science and Technology Project(20200173)The Central Guidance on Local Science and Technology Development Funds(22ZY1QA005)。
文摘Investigating the wind-sand flow response regularity in the longitudinal slope sections of desert highways provides a scientific basis for selecting the slope of desert roads.This study uses the Tengger Desert section of the Wuhai-Maqin Expressway as a case study,employing CFD numerical simulation methods to calculate and analyze the wind-sand flow field distribution characteristics in different longitudinal slope sections.The results show that:(1)Along with the direction of the incoming flow,the windward and leeward slope toes of the embankment are low-wind-speed zones,with the wind speed at the leeward slope toe being even lower.The higher the embankment,the larger the low-wind-speed zone at the windward and leeward slope toes.As the longitudinal slope increases,the extent of the lowwind-speed zone at the same location along the route also increases.(2)Along the route direction,the wind speed at the windward and leeward slope toes decreases as embankment height increases.At the embankment toe,sand particles are transported from the top to the bottom of the longitudinal slope,and the greater the longitudinal slope,the stronger the transport effect.(3)Along the route direction,the sand accumulation around the embankment gradually gathers toward the bottom of the longitudinal slope as the slope increases.When the longitudinal slope is 3%and 4%,the trend of sand accumulation moving from the windward side at the end of the route to the leeward side at the start of the route is more significant.When the longitudinal slope is less than or equal to 3%,severe sand accumulation within the embankment range is reduced by 86.4%or more compared to when the slope is 4%.(4)Under the same longitudinal slope,the higher the embankment height,the smaller its transport rate.When the embankment height is the same,the greater the longitudinal slope,the greater the embankment transport rate.
文摘The newly formulated non-Newtonian rivulet flows streaming down an inclined planar surface,with additional periodic perturbations arising from the application of the 2nd Stokes problem to the investigation of rivulet dynamics,are demonstrated in the current research.Hereby,the 2nd Stokes problem assumes that the surface,with a thin shared layer of the fluid on it,oscillates in a harmonic manner along the x-axis of the rivulet flow,which coincides with the main flow direction streaming down the underlying surface.We obtain the exact extension of the rivulet flow family,clarifying the structure of the pressure field,which fully absorbs the arising perturbation.The profile of the velocity field is assumed to be Gaussian-type with a non-zero level of plasticity.Hence,the absolutely non-Newtonian case of the viscoplastic flow solution,which satisfies the motion and continuity equations,is considered(with particular cases of exact solutions for pressure).The perturbed governing equations of motion for rivulet flows then result in the Riccati-type ordinary differential equation(ODE),describing the dynamics of the coordinate x(t).The approximated schematic dynamics are presented in graphical plots.
