The Janus fabrics designed for personal moisture/thermal regulation have garnered significant attention for their potential to enhance human comfort.However,the development of smart and dynamic fabrics capable of mana...The Janus fabrics designed for personal moisture/thermal regulation have garnered significant attention for their potential to enhance human comfort.However,the development of smart and dynamic fabrics capable of managing personal moisture/thermal comfort in response to changing external environments remains a challenge.Herein,a smart cellulose-based Janus fabric was designed to dynamically manage personal moisture/heat.The cotton fabric was grafted with N-isopropylacrylamide to construct a temperature-stimulated transport channel.Subsequently,hydrophobic ethyl cellulose and hydrophilic cellulose nanofiber were sprayed on the bottom and top sides of the fabric to obtain wettability gradient.The fabric exhibits anti-gravity directional liquid transportation from hydrophobic side to hydrophilic side,and can dynamically and continuously control the transportation time in a wide range of 3–66 s as the temperature increases from 10 to 40℃.This smart fabric can quickly dissipate heat at high temperatures,while at low temperatures,it can slow down the heat dissipation rate and prevent the human from becoming too cold.In addition,the fabric has UV shielding and photodynamic antibacterial properties through depositing graphitic carbon nitride nanosheets on the hydrophilic side.This smart fabric offers an innovative approach to maximizing personal comfort in environments with significant temperature variations.展开更多
This research study fabrics to ensure that they are free from carcinogenic dyes. It has been observed that there are poor-quality fabrics and consumers go to buy them without paying attention to the risks of using pro...This research study fabrics to ensure that they are free from carcinogenic dyes. It has been observed that there are poor-quality fabrics and consumers go to buy them without paying attention to the risks of using prohibited materials in the manufacture of these fabrics, and the use of unknown dyes has proven that some of them cause diseases to humans, especially children, that cause cancerous diseases. With the study sample consisting of (7), the study results indicate the presence of toxic formaldehyde in all sample dyes obtained from discount markets and online shopping.展开更多
Nanotechnology is transforming the textile industry by embedding UV-blocking and antimicrobial agents into fabric fibres at the molecular level. This study explores the development of biocomposites and nanocomposite m...Nanotechnology is transforming the textile industry by embedding UV-blocking and antimicrobial agents into fabric fibres at the molecular level. This study explores the development of biocomposites and nanocomposite materials for UV protection and microbial resistance in clothing. Nanoscale UV-blocking agents enhance the protection of textiles against harmful ultraviolet radiation. Recent studies on composites such as ZnO/carboxymethyl chitosan, polyacrylonitrile with UV absorbers and TiO2 nanoparticles, and lignin-TiO composites have shown significant improvements in UV protection and some antibacterial activity. Techniques such as electrospinning, hydrothermal synthesis, and natural fibre welding were used to create these composites, focusing on ZnO and TiO2 nanoparticles for dual functionality. Research on nanoscale UV-blocking agents could revolutionise sun protection in clothing and offer better safety against ultraviolet radiation. Multifunctional composites with UV-blocking and antibacterial properties could advance the use of protective clothing in various industries and outdoor activities. Emphasising natural fibres and sustainable materials aligns with the global trend towards eco-friendly solutions, leading to more environmentally friendly products. This literature review aims to comprehensively review and analyze current research on UV protective knit fabrics using nanotechnology, nanocomposites, and biocomposites. It seeks to identify research gaps, evaluate different approaches, and provide insights for future developments in this field.展开更多
Herein,a simple and effective outer-surface interactions assisted supramolecular hierarchical assembly has been first exploited to uniformly distribute tungstosilicic acid(TSA)inside the porous structure of cucurbit[1...Herein,a simple and effective outer-surface interactions assisted supramolecular hierarchical assembly has been first exploited to uniformly distribute tungstosilicic acid(TSA)inside the porous structure of cucurbit[10]uril-based single-layer 2D supramolecular-organic-frameworks(Q[10]-SOFs)in water.Importantly,the 2D Q[10]-SOFs can further serve as light harvesting antenna,achieving fast energy transfer to the embedded redox-active TSA upon photoexcitation,resulting in efficient visible light-driven selective oxidation of benzyl alcohols into the corresponding aldehydes in high yield at room temperature.Further studies revealed that the integrated of 2D Q[10]-SOFs and TSA played a key role in the catalytic process,due to the presence of a novel stepwise electron transfer route in the single-layer hybrid 2D structures.展开更多
Functional superhydrophobic coatings have attracted considerable attention because of their potential for a wide range of applications.In this study,a novel cyclotetrasiloxane-based hybrid superhydrophobic modifier(F-...Functional superhydrophobic coatings have attracted considerable attention because of their potential for a wide range of applications.In this study,a novel cyclotetrasiloxane-based hybrid superhydrophobic modifier(F-D_(4))was prepared for the first time using a mild thiolene click reaction of 2,4,6,8-tetravinyl-2,4,6,8-tetramethylcyclotetrasiloxane(Vi-D_(4))with perfluorohexylethanethiol(PFOT)and mercaptopropyltrimethoxysilane(MPTMS)as the raw materials.Then,F-D_(4) was introduced into the fabric via a sol-gel process,resulting in a superhydrophobic fabric(F-D_(4)-Fabric).The surface characteristics of the modified fabric were determined using scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS),and water contact angle(WCA).The coated fabrics have outstanding mechanical,physical,and chemical stability,and exhibit excellent self-cleaning and anti-fouling properties.Owing to its superhydrophobicity,FD_(4)-Fabric could efficiently separate a range of oil/water mixtures with a separation efficiency of up to 99.99%.The study showed that the modification strategy used in the dip-coating process greatly affected the superhydrophobicity of the cotton fabric,which is useful for oil/water separation and self-cleaning applications.展开更多
Self-regulating heating and self-powered flexibility are pivotal for future wearable devices.However,the low energy-conversion rate of wearable devices at low temperatures limits their application in plateaus and othe...Self-regulating heating and self-powered flexibility are pivotal for future wearable devices.However,the low energy-conversion rate of wearable devices at low temperatures limits their application in plateaus and other environments.This study introduces an azopolymer with remarkable semicrystallinity and reversible photoinduced solid-liquid transition ability that is obtained through copolymerization of azoben-zene(Azo)monomers and styrene.A composite of one such copolymer with an Azo:styrene molar ratio of 9:1(copolymer is denoted as PAzo9:1-co-polystyrene(PS))and nylon fabrics(NFs)is prepared(composite is denoted as PAzo9:1-co-PS@NF).PAzo9:1-co-PS@NF exhibits hydrophobicity and high wear resistance.Moreover,it shows good responsiveness(0.624 s^(−1))during isomerization under solid ultraviolet(UV)light(365 nm)with an energy density of 70.6 kJ kg^(−1).In addition,the open-circuit voltage,short-circuit current and quantity values of PAzo9:1-co-PS@NF exhibit small variations in a temperature range of−20°C to 25°C and remain at 170 V,5 μA,and 62 nC,respectively.Notably,the involved NFs were cut and sewn into gloves to be worn on a human hand model.When the model was exposed to both UV radiation and friction,the temperature of the finger coated with PAzo9:1-co-PS was approximately 6.0°C higher than that of the other parts.Therefore,developing triboelectric nanogenerators based on the in situ photothermal cycles of Azo in wearable devices is important to develop low-temperature self-regulating heating and self-powered flexible devices for extreme environments.展开更多
Thermotherapy,renowned for its non-invasive alleviation of musculoskeletal pain,faces constraints due to the scarcity of flexible and lightweight wearable heating solutions.In this study,we introduce an innovative fle...Thermotherapy,renowned for its non-invasive alleviation of musculoskeletal pain,faces constraints due to the scarcity of flexible and lightweight wearable heating solutions.In this study,we introduce an innovative flexible wearable film designed for effective thermotherapy.The film is engineered by in-situ immobilization of copper sulfide(CuS)nanoparticles onto a bicomponent PET@PE nonwoven fabric,subsequently enhanced through a straightforward hot-pressing process.This method results in an all-in-one integrated PET@PE/CuS film that possesses intrinsic self-enhancement and remarkable photothermal conversion capabilities.Upon exposure to near-infrared(NIR)laser,infrared(IR)therapeutic light,or simulated sunlight,the film maintains stable and precisely regulated temperatures,catering to the optimal thermotherapy temperature range.Its high mechanical robustness and chemical stability,as evidenced by rigorous mechanical and chemical testing,ensure the film’s suitability and long-term serviceability in wearable thermotherapy applications.Our study provides an affordable and sustainable strategy for the development of comfortable wearable thermotherapy devices,offering a promising avenue for pain management and rehabilitation.展开更多
Inspired by the thermal stability mechanism of thermophilic protein,which presents ionic bonds that have better stability at higher temperatures,this paper proposes the introduction of electrostatic interactions by ad...Inspired by the thermal stability mechanism of thermophilic protein,which presents ionic bonds that have better stability at higher temperatures,this paper proposes the introduction of electrostatic interactions by adding carboxyl-modified silica(C-SiO2),PAA,and CaCl_(2) to achieve higher viscosity over 25℃.The rheological behavior of C-SiO_(2)-based shear thickening fluid(CS-STF)was investigated at a temperature range of 25–55℃.Unlike SiO_(2)-based STF,which exhibits single-step thickening and a negative correlation between viscosity and temperature.As the C-SiO_(2) content was 41%(w/w)and the mass ratio of PAA:CaCl_(2):C-SiO_(2) was 3:1:10,the CS-STF displayed a double-thickening behavior,and the peak viscosity reached 1330 Pa·s at 35℃.From the yarn pull-out test,the inter-yarn force was significantly increased with the increasing CS-STF content.Treating UHMWPE fabrics with CS-STF improved the impact resistance effectively.In the blunt impact test,the U-CS fabrics with high CS-STF content(121.45 wt%)experienced penetration failure under high impact energy(18 J)due to stress concentration caused by the shear thickening behavior.The knife stabbing test demonstrated that U-CS fabrics with appropriate content(88.38 wt%)have the best stabbing resistance in various impact energies.Overall,this study proposed a high-performence STF showing double-thickening and enhancing shear-thickening behavior at a wide temperature range,the composite fabrics with the performance of resisting both the blunt and stab impact had broad application prospects in the field of personal protection.展开更多
In today's fast-paced modern life, whether for fitness training, outdoor adventures, or daily commutes, we all yearn for quick-dry apparel that can rapidly wick away moisture and keep our bodies dry and comfortabl...In today's fast-paced modern life, whether for fitness training, outdoor adventures, or daily commutes, we all yearn for quick-dry apparel that can rapidly wick away moisture and keep our bodies dry and comfortable. As a standout in functional textiles, quick-dry fabrics are becoming the top choice for more and more people, thanks to their exceptional moisture-wicking performance and rapid drying capabilities.展开更多
Surface modification of fabrics is an effective way to endow them with antifouling properties while still maintaining their key advantages such as comfort,softness and stretchability.Herein,an atmospheric pressure die...Surface modification of fabrics is an effective way to endow them with antifouling properties while still maintaining their key advantages such as comfort,softness and stretchability.Herein,an atmospheric pressure dielectric barrier discharge(DBD)plasma method is demonstrated for the processing of silk fabrics using 1H,1H,2H,2H-perfluorodecyltriethoxysilane(PFDS)as the precursor.The results showed the successful grafting of PFDS groups onto the surface of silk fabrics without causing damage.Meanwhile,the gas temperature is rather low during the whole processing procedure,suggesting the non-equilibrium characteristics of DBD plasma.The influence on fabrics of the processing parameters(PFDS concentration,plasma treatment time and plasma discharge power)was systematically investigated.An optimum processing condition was determined to be a PFDS concentration of 8wt%,a plasma processing time of 40 s and a plasma power of 11.87 W.However,with prolonged plasma processing time or enhanced plasma power,the plasma-grafted PFDS films could be degraded.Further study revealed that plasma processing of silk fabrics with PFDS would lead to a change in their chemical composition and surface roughness.As a result,the surface energy of the fabrics was reduced,accompanied by improved water and oil repellency as well as enhanced antifouling performance.Besides,the plasma-grafted PFDS films also had good durability and stability.By extending the method to polyester and wool against different oil-/water-based stains,the DBD plasma surface modification technique demonstrated good versatility in improving the antifouling properties of fabrics.This work provides guidance for the surface modification of fabrics using DBD plasma to confer them with desirable functionalities.展开更多
Have we ever seen such a shocking garment in the fashion industry?A down jacket that claims to be one but uses absolutely no down,yet possesses remarkable heating and insulating properties,all designed with a colorles...Have we ever seen such a shocking garment in the fashion industry?A down jacket that claims to be one but uses absolutely no down,yet possesses remarkable heating and insulating properties,all designed with a colorless aesthetic.It resembles clothing that has come from the future.The secret behind this captivating design lies in"SOLAMENTR■"developed by Sumitomo Metal Mining Co.,Ltd.展开更多
On March l3th,the three-day Intertextile Shanghai Apparel Fabrics-Spring Edition 2025 concluded successfully at the National Exhibition andConvention Center(Shanghai).This bustling event,carrying the expectationsof th...On March l3th,the three-day Intertextile Shanghai Apparel Fabrics-Spring Edition 2025 concluded successfully at the National Exhibition andConvention Center(Shanghai).This bustling event,carrying the expectationsof the industry,conveyed the enthusiasm for business cooperation in China'stextile industry at the beginning of 2025 through its exhibition data.展开更多
The pyrolytic carbon （PyC） coatings were fabricated on A1203 fiber fabrics by the method of chemical vapor deposition （CVD）. The microstructures of A1203 fibers with and without PyC coatings were characterized by ...The pyrolytic carbon （PyC） coatings were fabricated on A1203 fiber fabrics by the method of chemical vapor deposition （CVD）. The microstructures of A1203 fibers with and without PyC coatings were characterized by SEM and Raman spectroscopy. The influence of deposition time of PyC on the DC conductivity （ad） of A1203 filaments and complex permittivity of fabrics at X band （8.2-12.4 GHz） were investigated. The values of Crd and complex permittivity increase with increasing deposition time of PyC. The electron relaxation polarization and conductance loss were supposed to be contributed to the increase of ε＇ and ε＂, respectively. In addition, the reflection loss （RL） of fabrics was calculated. The results show that the microwave absorbing properties of Al2O3 fiber fabrics can be improved by PyC coatings. The best RL results are for 60 min-deposition sample, of which the minimum value is about -40.4 dB at about 9.5 GHz and the absorbing frequency band （AFB） is about 4 GHz.展开更多
The concept of the imperfection sensitive region is given. The advanced stochastic imperfection method is used to research the imperfection sensitive region of single-layer latticed domes. Taking a K6 single-layer lat...The concept of the imperfection sensitive region is given. The advanced stochastic imperfection method is used to research the imperfection sensitive region of single-layer latticed domes. Taking a K6 single-layer latticed dome with a diameter of 50 m as an example, its imperfection sensitive region is made up of the first 12 kinds of joints. The influence of the imperfections of support joints on the stability of the K6 single-layer latticed dome is negligible. Influences of the joint imperfections of the main rib and the secondary rib on the structural stability are similar. The initial deviations of these joints all greatly lower the critical load of the dome. Results show that the method can analyze the structural imperfection sensitive region quantitatively and accurately.展开更多
In this paper, ballistic impact tests on wrapped multi-layer Kevlar 49 woven fabric systems were carried out with a flat blade projectile to investigate the impact response during a fan blade out event. The influences...In this paper, ballistic impact tests on wrapped multi-layer Kevlar 49 woven fabric systems were carried out with a flat blade projectile to investigate the impact response during a fan blade out event. The influences of the number of Kevlar layers and pre-tension were discussed particularly. Test results were used to analyze failure modes and energy absorption characteristics of multi-ply Kevlar fabrics. Results show that there are two kinds of impact damage for fabrics： global deformation mainly involving stretching of yarns in the impact region and fabric wrinkle from both sides to the impact zone, and local damage characterized by yarn fracture, yarn pull-out, and yarn unraveling. The energy absorption capability of Kevlar 49 woven fabrics improves with the number of fabric layers. The energy absorbed by multi-layer fabrics increases slightly at the beginning and then decreases substantially with pre-tension. The work in this paper can provide guidance for designing light-weight multi-layer fabrics containment systems.展开更多
The Ailaoshan-Red River（ASRR） shear zone is one of the major Southeast Asian tectonic discontinuities that have figured the present tectonic framework of the eastern Tibet.Several metamorphic massifs are distributed...The Ailaoshan-Red River（ASRR） shear zone is one of the major Southeast Asian tectonic discontinuities that have figured the present tectonic framework of the eastern Tibet.Several metamorphic massifs are distributed linearly along the shear zone,e.g.Xuelongshan,Diancangshan, Ailaoshan and Day Nui Con Voi from north to south.They bear a lot of lines of evidence for the tectonic evolution of the eastern Tibetan at different crustal levels in different tectonic stages.Controversy still exists on the deformation structures,microstructures and their relationship with metamorphisms along the ASRR.In this paper detailed microstructural and EBSD（Electron Backscattered Diffraction） fabric analysis of some highly sheared granitic rocks from different massifs along the ASRR are conducted.High temperature structures and microstructures are preserved in unsheared gneisses,in weakly sheared xenoliths or in some parts of the highly sheared rocks（mylonites）.Several types of high temperature quartz c-axis fabrics show symmetrical patterns or transitions from symmetrical to asymmetrical patterns.The former are attributed to coaxial deformation during regional shortening in an early stage of the Indian-Eurasian tectonic interaction and the latter are related to the transitions from coaxial compression to noncoaxial shearing during the post-collisional ASRR left lateral shearing.展开更多
The paper introduces a new technique for the treatment of the woven fabrics. Sprayed by high pressure water jet, the appearance, handle and stiffness of the fabric are improved. Other properties of the high pressure w...The paper introduces a new technique for the treatment of the woven fabrics. Sprayed by high pressure water jet, the appearance, handle and stiffness of the fabric are improved. Other properties of the high pressure water treated fabrics like drape coefficient, air permeability, tenacity are also presented.展开更多
In this paper,an equation expressing relationship between trapezoid tear strength and fabrictensile properties,weave texture and geomitry of specimen was studied.It could be used to predicttrapezoid tear strength for ...In this paper,an equation expressing relationship between trapezoid tear strength and fabrictensile properties,weave texture and geomitry of specimen was studied.It could be used to predicttrapezoid tear strength for uncoated fabrics well,and also for coated fabrics if multipling a stressconcentration coefficient.The four tear test standard methods(single-rip,double-rip,wing-ripand trapezoid tear)have been adopted to measure the tear strength of fifteen coated fabrics whichwere used for architecture and gencral industrial purposes and the nine corresponding uncoatedfabrics respectively.Analysis and comparison of experimental results showed that there are an ex-cellent correlation between each two methods with the four tear parameters respectively and a goodconsistency of the order of the tear strength for different samples.In addition,the experimental results showed that a good correlation exists between the tenslieproperties and tear strength of coated and uncoated fabrics.展开更多
The bending behavior of woven fabrics under low curva-ture conditions has been analyzed by linear viscoelastictheory.The fabric is assumed to behave viscoelasticallyand to be subjected to frictional restraints in bend...The bending behavior of woven fabrics under low curva-ture conditions has been analyzed by linear viscoelastictheory.The fabric is assumed to behave viscoelasticallyand to be subjected to frictional restraints in bending de-formation.The frictional restraint is considered to beproportional to the curvature and can be described by africtional moment.A model has been constructed by astandard three-element solid model and a paralleledfrictional sliding element.The equations of the model fora cyclic curvature variation are derived.A set of param-eters of the equations for each fabric has been obtainedexperimentally.Predictions of the bending rigidity andhysteresis for wool,cashmere,wool/polyester blended,polyester and cotton fabrics are made,displaying verygood agreement with the experimental observations.展开更多
基金support of this work by National Key Research and Development Program of China(2019YFC19059003)the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(23KJB430024)+1 种基金Jiangsu Funding Program for Excellent Postdoctoral Talent(2023ZB680)Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)are gratefully acknowledged.
文摘The Janus fabrics designed for personal moisture/thermal regulation have garnered significant attention for their potential to enhance human comfort.However,the development of smart and dynamic fabrics capable of managing personal moisture/thermal comfort in response to changing external environments remains a challenge.Herein,a smart cellulose-based Janus fabric was designed to dynamically manage personal moisture/heat.The cotton fabric was grafted with N-isopropylacrylamide to construct a temperature-stimulated transport channel.Subsequently,hydrophobic ethyl cellulose and hydrophilic cellulose nanofiber were sprayed on the bottom and top sides of the fabric to obtain wettability gradient.The fabric exhibits anti-gravity directional liquid transportation from hydrophobic side to hydrophilic side,and can dynamically and continuously control the transportation time in a wide range of 3–66 s as the temperature increases from 10 to 40℃.This smart fabric can quickly dissipate heat at high temperatures,while at low temperatures,it can slow down the heat dissipation rate and prevent the human from becoming too cold.In addition,the fabric has UV shielding and photodynamic antibacterial properties through depositing graphitic carbon nitride nanosheets on the hydrophilic side.This smart fabric offers an innovative approach to maximizing personal comfort in environments with significant temperature variations.
文摘This research study fabrics to ensure that they are free from carcinogenic dyes. It has been observed that there are poor-quality fabrics and consumers go to buy them without paying attention to the risks of using prohibited materials in the manufacture of these fabrics, and the use of unknown dyes has proven that some of them cause diseases to humans, especially children, that cause cancerous diseases. With the study sample consisting of (7), the study results indicate the presence of toxic formaldehyde in all sample dyes obtained from discount markets and online shopping.
文摘Nanotechnology is transforming the textile industry by embedding UV-blocking and antimicrobial agents into fabric fibres at the molecular level. This study explores the development of biocomposites and nanocomposite materials for UV protection and microbial resistance in clothing. Nanoscale UV-blocking agents enhance the protection of textiles against harmful ultraviolet radiation. Recent studies on composites such as ZnO/carboxymethyl chitosan, polyacrylonitrile with UV absorbers and TiO2 nanoparticles, and lignin-TiO composites have shown significant improvements in UV protection and some antibacterial activity. Techniques such as electrospinning, hydrothermal synthesis, and natural fibre welding were used to create these composites, focusing on ZnO and TiO2 nanoparticles for dual functionality. Research on nanoscale UV-blocking agents could revolutionise sun protection in clothing and offer better safety against ultraviolet radiation. Multifunctional composites with UV-blocking and antibacterial properties could advance the use of protective clothing in various industries and outdoor activities. Emphasising natural fibres and sustainable materials aligns with the global trend towards eco-friendly solutions, leading to more environmentally friendly products. This literature review aims to comprehensively review and analyze current research on UV protective knit fabrics using nanotechnology, nanocomposites, and biocomposites. It seeks to identify research gaps, evaluate different approaches, and provide insights for future developments in this field.
基金supported by the National Natural Science Foundation of China(No.22271090)。
文摘Herein,a simple and effective outer-surface interactions assisted supramolecular hierarchical assembly has been first exploited to uniformly distribute tungstosilicic acid(TSA)inside the porous structure of cucurbit[10]uril-based single-layer 2D supramolecular-organic-frameworks(Q[10]-SOFs)in water.Importantly,the 2D Q[10]-SOFs can further serve as light harvesting antenna,achieving fast energy transfer to the embedded redox-active TSA upon photoexcitation,resulting in efficient visible light-driven selective oxidation of benzyl alcohols into the corresponding aldehydes in high yield at room temperature.Further studies revealed that the integrated of 2D Q[10]-SOFs and TSA played a key role in the catalytic process,due to the presence of a novel stepwise electron transfer route in the single-layer hybrid 2D structures.
基金financially supported by the National Key R&D Program of China(No.2022YFE0197000)。
文摘Functional superhydrophobic coatings have attracted considerable attention because of their potential for a wide range of applications.In this study,a novel cyclotetrasiloxane-based hybrid superhydrophobic modifier(F-D_(4))was prepared for the first time using a mild thiolene click reaction of 2,4,6,8-tetravinyl-2,4,6,8-tetramethylcyclotetrasiloxane(Vi-D_(4))with perfluorohexylethanethiol(PFOT)and mercaptopropyltrimethoxysilane(MPTMS)as the raw materials.Then,F-D_(4) was introduced into the fabric via a sol-gel process,resulting in a superhydrophobic fabric(F-D_(4)-Fabric).The surface characteristics of the modified fabric were determined using scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS),and water contact angle(WCA).The coated fabrics have outstanding mechanical,physical,and chemical stability,and exhibit excellent self-cleaning and anti-fouling properties.Owing to its superhydrophobicity,FD_(4)-Fabric could efficiently separate a range of oil/water mixtures with a separation efficiency of up to 99.99%.The study showed that the modification strategy used in the dip-coating process greatly affected the superhydrophobicity of the cotton fabric,which is useful for oil/water separation and self-cleaning applications.
基金supported by the China Postdoctoral Science Foundation(No.2023M732344)the National Natural Science Foundation of China(Nos.51973119,52327802,52173078)+4 种基金Shenzhen Key Laboratory of Photonics and Biophotonics(ZDSYS20210623092006020)Shenzhen Key Laboratory for Low-carbon Natural Science Foundation of Guangdong Province(No.2024A1515010639)Construction Material and Technology(No.ZDSYS20220606100406016)National Key Laboratory of Green and Long-Life Road Engineering in Extreme Environment(Shenzhen)(No.868-000003010103)Joint Funds of Ministry of Education(No.8091B022225).
文摘Self-regulating heating and self-powered flexibility are pivotal for future wearable devices.However,the low energy-conversion rate of wearable devices at low temperatures limits their application in plateaus and other environments.This study introduces an azopolymer with remarkable semicrystallinity and reversible photoinduced solid-liquid transition ability that is obtained through copolymerization of azoben-zene(Azo)monomers and styrene.A composite of one such copolymer with an Azo:styrene molar ratio of 9:1(copolymer is denoted as PAzo9:1-co-polystyrene(PS))and nylon fabrics(NFs)is prepared(composite is denoted as PAzo9:1-co-PS@NF).PAzo9:1-co-PS@NF exhibits hydrophobicity and high wear resistance.Moreover,it shows good responsiveness(0.624 s^(−1))during isomerization under solid ultraviolet(UV)light(365 nm)with an energy density of 70.6 kJ kg^(−1).In addition,the open-circuit voltage,short-circuit current and quantity values of PAzo9:1-co-PS@NF exhibit small variations in a temperature range of−20°C to 25°C and remain at 170 V,5 μA,and 62 nC,respectively.Notably,the involved NFs were cut and sewn into gloves to be worn on a human hand model.When the model was exposed to both UV radiation and friction,the temperature of the finger coated with PAzo9:1-co-PS was approximately 6.0°C higher than that of the other parts.Therefore,developing triboelectric nanogenerators based on the in situ photothermal cycles of Azo in wearable devices is important to develop low-temperature self-regulating heating and self-powered flexible devices for extreme environments.
基金support from the National Natural Science Foundation of China(No.52473029)the Shanghai Oriental Talent Program,and the Fundamental Research Funds for the Central Universities(No.CUSF-DH-T-2024020)。
文摘Thermotherapy,renowned for its non-invasive alleviation of musculoskeletal pain,faces constraints due to the scarcity of flexible and lightweight wearable heating solutions.In this study,we introduce an innovative flexible wearable film designed for effective thermotherapy.The film is engineered by in-situ immobilization of copper sulfide(CuS)nanoparticles onto a bicomponent PET@PE nonwoven fabric,subsequently enhanced through a straightforward hot-pressing process.This method results in an all-in-one integrated PET@PE/CuS film that possesses intrinsic self-enhancement and remarkable photothermal conversion capabilities.Upon exposure to near-infrared(NIR)laser,infrared(IR)therapeutic light,or simulated sunlight,the film maintains stable and precisely regulated temperatures,catering to the optimal thermotherapy temperature range.Its high mechanical robustness and chemical stability,as evidenced by rigorous mechanical and chemical testing,ensure the film’s suitability and long-term serviceability in wearable thermotherapy applications.Our study provides an affordable and sustainable strategy for the development of comfortable wearable thermotherapy devices,offering a promising avenue for pain management and rehabilitation.
基金the Major Science and Technology Demonstration Projects in Jiangsu Province(Grant No.BE2022608).
文摘Inspired by the thermal stability mechanism of thermophilic protein,which presents ionic bonds that have better stability at higher temperatures,this paper proposes the introduction of electrostatic interactions by adding carboxyl-modified silica(C-SiO2),PAA,and CaCl_(2) to achieve higher viscosity over 25℃.The rheological behavior of C-SiO_(2)-based shear thickening fluid(CS-STF)was investigated at a temperature range of 25–55℃.Unlike SiO_(2)-based STF,which exhibits single-step thickening and a negative correlation between viscosity and temperature.As the C-SiO_(2) content was 41%(w/w)and the mass ratio of PAA:CaCl_(2):C-SiO_(2) was 3:1:10,the CS-STF displayed a double-thickening behavior,and the peak viscosity reached 1330 Pa·s at 35℃.From the yarn pull-out test,the inter-yarn force was significantly increased with the increasing CS-STF content.Treating UHMWPE fabrics with CS-STF improved the impact resistance effectively.In the blunt impact test,the U-CS fabrics with high CS-STF content(121.45 wt%)experienced penetration failure under high impact energy(18 J)due to stress concentration caused by the shear thickening behavior.The knife stabbing test demonstrated that U-CS fabrics with appropriate content(88.38 wt%)have the best stabbing resistance in various impact energies.Overall,this study proposed a high-performence STF showing double-thickening and enhancing shear-thickening behavior at a wide temperature range,the composite fabrics with the performance of resisting both the blunt and stab impact had broad application prospects in the field of personal protection.
文摘In today's fast-paced modern life, whether for fitness training, outdoor adventures, or daily commutes, we all yearn for quick-dry apparel that can rapidly wick away moisture and keep our bodies dry and comfortable. As a standout in functional textiles, quick-dry fabrics are becoming the top choice for more and more people, thanks to their exceptional moisture-wicking performance and rapid drying capabilities.
基金the financial support from National Natural Science Foundation of China(Nos.22078125 and 52004102)Postdoctoral Science Foundation of China(No.2023M741472)。
文摘Surface modification of fabrics is an effective way to endow them with antifouling properties while still maintaining their key advantages such as comfort,softness and stretchability.Herein,an atmospheric pressure dielectric barrier discharge(DBD)plasma method is demonstrated for the processing of silk fabrics using 1H,1H,2H,2H-perfluorodecyltriethoxysilane(PFDS)as the precursor.The results showed the successful grafting of PFDS groups onto the surface of silk fabrics without causing damage.Meanwhile,the gas temperature is rather low during the whole processing procedure,suggesting the non-equilibrium characteristics of DBD plasma.The influence on fabrics of the processing parameters(PFDS concentration,plasma treatment time and plasma discharge power)was systematically investigated.An optimum processing condition was determined to be a PFDS concentration of 8wt%,a plasma processing time of 40 s and a plasma power of 11.87 W.However,with prolonged plasma processing time or enhanced plasma power,the plasma-grafted PFDS films could be degraded.Further study revealed that plasma processing of silk fabrics with PFDS would lead to a change in their chemical composition and surface roughness.As a result,the surface energy of the fabrics was reduced,accompanied by improved water and oil repellency as well as enhanced antifouling performance.Besides,the plasma-grafted PFDS films also had good durability and stability.By extending the method to polyester and wool against different oil-/water-based stains,the DBD plasma surface modification technique demonstrated good versatility in improving the antifouling properties of fabrics.This work provides guidance for the surface modification of fabrics using DBD plasma to confer them with desirable functionalities.
文摘Have we ever seen such a shocking garment in the fashion industry?A down jacket that claims to be one but uses absolutely no down,yet possesses remarkable heating and insulating properties,all designed with a colorless aesthetic.It resembles clothing that has come from the future.The secret behind this captivating design lies in"SOLAMENTR■"developed by Sumitomo Metal Mining Co.,Ltd.
文摘On March l3th,the three-day Intertextile Shanghai Apparel Fabrics-Spring Edition 2025 concluded successfully at the National Exhibition andConvention Center(Shanghai).This bustling event,carrying the expectationsof the industry,conveyed the enthusiasm for business cooperation in China'stextile industry at the beginning of 2025 through its exhibition data.
基金Project (51072165) supported by the National Natural Science Foundation of ChinaProject (KP200901) supported by the Fund of the State Key Laboratory of Solidification Processing,China
文摘The pyrolytic carbon （PyC） coatings were fabricated on A1203 fiber fabrics by the method of chemical vapor deposition （CVD）. The microstructures of A1203 fibers with and without PyC coatings were characterized by SEM and Raman spectroscopy. The influence of deposition time of PyC on the DC conductivity （ad） of A1203 filaments and complex permittivity of fabrics at X band （8.2-12.4 GHz） were investigated. The values of Crd and complex permittivity increase with increasing deposition time of PyC. The electron relaxation polarization and conductance loss were supposed to be contributed to the increase of ε＇ and ε＂, respectively. In addition, the reflection loss （RL） of fabrics was calculated. The results show that the microwave absorbing properties of Al2O3 fiber fabrics can be improved by PyC coatings. The best RL results are for 60 min-deposition sample, of which the minimum value is about -40.4 dB at about 9.5 GHz and the absorbing frequency band （AFB） is about 4 GHz.
文摘The concept of the imperfection sensitive region is given. The advanced stochastic imperfection method is used to research the imperfection sensitive region of single-layer latticed domes. Taking a K6 single-layer latticed dome with a diameter of 50 m as an example, its imperfection sensitive region is made up of the first 12 kinds of joints. The influence of the imperfections of support joints on the stability of the K6 single-layer latticed dome is negligible. Influences of the joint imperfections of the main rib and the secondary rib on the structural stability are similar. The initial deviations of these joints all greatly lower the critical load of the dome. Results show that the method can analyze the structural imperfection sensitive region quantitatively and accurately.
基金co-supported by the National Natural Science Foundation of China (No.51575262)the China Postdoctoral Science Foundation (No.2015M571754)the Aeronautical Science Foundation of China (No.2015ZB52008)
文摘In this paper, ballistic impact tests on wrapped multi-layer Kevlar 49 woven fabric systems were carried out with a flat blade projectile to investigate the impact response during a fan blade out event. The influences of the number of Kevlar layers and pre-tension were discussed particularly. Test results were used to analyze failure modes and energy absorption characteristics of multi-ply Kevlar fabrics. Results show that there are two kinds of impact damage for fabrics： global deformation mainly involving stretching of yarns in the impact region and fabric wrinkle from both sides to the impact zone, and local damage characterized by yarn fracture, yarn pull-out, and yarn unraveling. The energy absorption capability of Kevlar 49 woven fabrics improves with the number of fabric layers. The energy absorbed by multi-layer fabrics increases slightly at the beginning and then decreases substantially with pre-tension. The work in this paper can provide guidance for designing light-weight multi-layer fabrics containment systems.
基金supported by the National Key Basic Research and Development(973) Project (2009CB421001)National Natural Science Foundation of China(40872139)+2 种基金China Geological Survey (1212010661311)Ministry of Land and Resources (200811008)the Ministry of Education,Proiect 111 (B07011)
文摘The Ailaoshan-Red River（ASRR） shear zone is one of the major Southeast Asian tectonic discontinuities that have figured the present tectonic framework of the eastern Tibet.Several metamorphic massifs are distributed linearly along the shear zone,e.g.Xuelongshan,Diancangshan, Ailaoshan and Day Nui Con Voi from north to south.They bear a lot of lines of evidence for the tectonic evolution of the eastern Tibetan at different crustal levels in different tectonic stages.Controversy still exists on the deformation structures,microstructures and their relationship with metamorphisms along the ASRR.In this paper detailed microstructural and EBSD（Electron Backscattered Diffraction） fabric analysis of some highly sheared granitic rocks from different massifs along the ASRR are conducted.High temperature structures and microstructures are preserved in unsheared gneisses,in weakly sheared xenoliths or in some parts of the highly sheared rocks（mylonites）.Several types of high temperature quartz c-axis fabrics show symmetrical patterns or transitions from symmetrical to asymmetrical patterns.The former are attributed to coaxial deformation during regional shortening in an early stage of the Indian-Eurasian tectonic interaction and the latter are related to the transitions from coaxial compression to noncoaxial shearing during the post-collisional ASRR left lateral shearing.
文摘The paper introduces a new technique for the treatment of the woven fabrics. Sprayed by high pressure water jet, the appearance, handle and stiffness of the fabric are improved. Other properties of the high pressure water treated fabrics like drape coefficient, air permeability, tenacity are also presented.
文摘In this paper,an equation expressing relationship between trapezoid tear strength and fabrictensile properties,weave texture and geomitry of specimen was studied.It could be used to predicttrapezoid tear strength for uncoated fabrics well,and also for coated fabrics if multipling a stressconcentration coefficient.The four tear test standard methods(single-rip,double-rip,wing-ripand trapezoid tear)have been adopted to measure the tear strength of fifteen coated fabrics whichwere used for architecture and gencral industrial purposes and the nine corresponding uncoatedfabrics respectively.Analysis and comparison of experimental results showed that there are an ex-cellent correlation between each two methods with the four tear parameters respectively and a goodconsistency of the order of the tear strength for different samples.In addition,the experimental results showed that a good correlation exists between the tenslieproperties and tear strength of coated and uncoated fabrics.
文摘The bending behavior of woven fabrics under low curva-ture conditions has been analyzed by linear viscoelastictheory.The fabric is assumed to behave viscoelasticallyand to be subjected to frictional restraints in bending de-formation.The frictional restraint is considered to beproportional to the curvature and can be described by africtional moment.A model has been constructed by astandard three-element solid model and a paralleledfrictional sliding element.The equations of the model fora cyclic curvature variation are derived.A set of param-eters of the equations for each fabric has been obtainedexperimentally.Predictions of the bending rigidity andhysteresis for wool,cashmere,wool/polyester blended,polyester and cotton fabrics are made,displaying verygood agreement with the experimental observations.
