We study the influence of the phase noises of far detuning single frequency lasers on the lifetime of Bose-Einstein condensation（BEC）of^（87）Rb in an optical dipole trap.As a comparison,we shine a continuous-wave s...We study the influence of the phase noises of far detuning single frequency lasers on the lifetime of Bose-Einstein condensation（BEC）of^（87）Rb in an optical dipole trap.As a comparison,we shine a continuous-wave singlefrequency Ti：sapphire laser,an external-cavity diode laser and a phase-locked diode laser on BEC.We measure the heating and lifetime of BEC in two different hyperfine states：｜F=2,m_F=2〉and｜F=1,m_F=1〉.Due to the narrow linewidth and small phase noise,the continuous-wave single-frequency Ti：sapphire laser has less influence on the lifetime of^（87）Rb BEC than the external-cavity diode laser.To reduce the phase noise of the external-cavity diode laser,we use an optical phase-locked loop for the external-cavity diode laser to be locked on a Ti：sapphire laser.The lifetime of BEC is increased when applfying the phase-Jocked diode laser in contrast with the external-cavity diode laser.展开更多
A novel Er:YAG laser system operating at 1645 nm with high pulse-repetition-frequency(PRF)of kHz level is demonstrated.A ring cavity with double gain medium end-pumped by two fiber lasers is utilized to obtain high pu...A novel Er:YAG laser system operating at 1645 nm with high pulse-repetition-frequency(PRF)of kHz level is demonstrated.A ring cavity with double gain medium end-pumped by two fiber lasers is utilized to obtain high pulse energy.A novel‘triple-reflection’configuration on a piezoelectric actuator(PZT)is adopted to achieve high-repetition-rate at 3-kHz operation with the ramp-fire locking method.Single frequency pulses with maximum average power of 18.3 W at 3 kHz are obtained,and the pulse duration time is 318 ns.The full line width at half maximum(FWHM)of the pulses measured by the heterodyne technique is 1.71 MHz at 3 kHz.To the best of our knowledge,this is the highest PRF single-frequency laser pulses achieved based Er:YAG gain medium.展开更多
An injection-seeded single-frequency Q-switched Nd：YAG laser is accomplished by using a phase modulated rampfire technique. A RbTiOPO4（RTP） electro-optic crystal is selected for effective optical path length modula...An injection-seeded single-frequency Q-switched Nd：YAG laser is accomplished by using a phase modulated rampfire technique. A RbTiOPO4（RTP） electro-optic crystal is selected for effective optical path length modulation of the slave self-filtering unstable resonator. This single-frequency laser is capable of producing 50 m J pulse energy at 1 Hz repetition rate with a pulse width of 16 ns. The standard deviation of laser pulse intensity for consecutive 100 shots from the mean pulse intensity is less than 1.05%. A spectral linewidth of less than 0.5 pm with a frequency jitter of about 14 fm over30 min is obtained.展开更多
We propose a method to directly measure phase-related noise characteristics of single-frequency lasers in the 728–980 nm band based on a 120°phase difference interferometer.Differential phase information of the ...We propose a method to directly measure phase-related noise characteristics of single-frequency lasers in the 728–980 nm band based on a 120°phase difference interferometer.Differential phase information of the laser under test is demodulated via the interferometer.Other parameters related to the phase noise characteristics such as linewidth at different observation time, phase/frequency noise, power spectrum density of phase/frequency fluctuation, and Allan deviation are further obtained.Frequency noise as low as 1 Hz^2/Hz can be measured using our system.Then the phase-related noise characteristics of two commercial lasers frequently used in cold atomic clocks are studied systematically by the method.Furthermore, several influencing factors and their relative evolution laws are also revealed, such as the pump current and frequency-locking control parameters.This would help to optimize the laser performance, select laser sources, and evaluate the system performance for cold atomic physics applications.展开更多
We present a monolithic single-frequency microring laser utilizing Er^(3+)-doped thin film lithium niobate(TFLN)on insulator.The device is fabricated employing a dual-cavity architecture,in which two microring resonat...We present a monolithic single-frequency microring laser utilizing Er^(3+)-doped thin film lithium niobate(TFLN)on insulator.The device is fabricated employing a dual-cavity architecture,in which two microring resonators are nested through two pulley coupling regions and share a common semicircular cavity.The singlefrequency laser achieves a peak output power of 146μW,with a side mode suppression ratio of 32 dB and slope efficiency of 0.7%,operating at a wavelength of 1530.85 nm,which leverages gain competition and the Vernier effect.Furthermore,the single-frequency laser emission can be selectively switched between 1530.85 nm and 1547.13 nm by a precise adjustment of the device's structural parameters.Our research establishes the foundation for a fully integrated multifunction TFLN system,which exhibits great potential applications in advancing optical computation,bio-chemical sensing,and signal processing.展开更多
High-power single-frequency fiber lasers with diffraction-limited spots are indispensable for a wide range of photonic applications and are particularly in advanced detection and sensing technologies.However,the simul...High-power single-frequency fiber lasers with diffraction-limited spots are indispensable for a wide range of photonic applications and are particularly in advanced detection and sensing technologies.However,the simultaneous achievement of kilowatt-level output power and diffraction-limited beam quality has remained elusive in all reported single-frequency fiber laser systems to date,primarily due to limitations imposed by the stimulated Brillouin scattering(SBS)effect and transverse mode instability(TMI)effect.In this study,we demonstrate the design and manufacturing of an ultra-low numerical aperture(NA)functional Yb-doped fiber featuring a bat-type refractive index distribution,specifically engineered for single-frequency laser amplification.In the fabrication,we implemented multiple chelate gas filling and particle deposition iterations,leading to an active fiber with a bat-type refractive index distribution.The unique capabilities of this large mode area and high-order modes leakage fiber(HOMLF)were demonstrated by stably amplifying the single-frequency laser with more than one kilowatt output power and near single mode beam quality(M_(x)^(2)=1.10,M_(x)^(2)=1.18)for the first time.This fiber design advances the leap forward in single-frequency fiber lasers,which could contribute as a novel and efficient laser amplification technique for the next generation of gravitational wave detection systems.展开更多
Single-frequency 1319-nm laser was obtained by using a laser-diode-pumped monolithic Nd:YAG crystal with a non-planar ring oscillator (NPRO). When the NPRO laser was pumped by an 800-um fiber coupled laser diode, the ...Single-frequency 1319-nm laser was obtained by using a laser-diode-pumped monolithic Nd:YAG crystal with a non-planar ring oscillator (NPRO). When the NPRO laser was pumped by an 800-um fiber coupled laser diode, the output power of the single-frequency 1319-nm laser was 220 mW, and the slope efficiency was 16%. With a 100-um fiber coupled diode laser pumped, 99-mW single-frequency 1319-nm laser was obtained with a slope efficiency of 29%.展开更多
Diode pumped monolithic nonplanar ring laser has been developed, yielding single frequency laser and has the advantages of compactness, reliability and high efficiency. Its principles are given in detail and a monolit...Diode pumped monolithic nonplanar ring laser has been developed, yielding single frequency laser and has the advantages of compactness, reliability and high efficiency. Its principles are given in detail and a monolithic nonplanar ring laser is designed. As a result, a laser of hundreds milliwatts cw single frequency output was built up, placed in a magnetic field and pumped by LD. The optical conversion efficiency was more than 15% and the slope efficiency more than 30%. The laser beam had a good quality, with M 2 about 1 2.展开更多
The flexible delivery of single-frequency lasers is far more challenging than that of conventional lasers due to the onset of stimulated Brillouin scattering (SBS).Here we present the successful delivery of 100 W sing...The flexible delivery of single-frequency lasers is far more challenging than that of conventional lasers due to the onset of stimulated Brillouin scattering (SBS).Here we present the successful delivery of 100 W single-frequency laser power through 100 m of anti-resonant hollow-core fiber (AR-HCF) in an all-fiber configuration,with the absence of SBS.By employing a custom-designed AR-HCF with a mode-field diameter matching that of a large-mode-area panda fiber the system achieves high coupling efficiency without the need for free-space components or fiber post-processing.The AR-HCF attains a transmission efficiency of 92%,delivering an output power of 100.3 W with a beam quality factor(M^(2)) of 1.22.The absence of SBS is confirmed through monitoring backward light,which shows no increase in intensity This all-fiber architecture ensures high stability,compactness and efficiency,potentially expanding the application scope of single-frequency lasers in high-precision metrology,optical communication,light detection and ranging systems gravitational wave detection and other advanced applications.展开更多
A compact linearly polarized, low-noise, narrow-linewidth, single-frequency fiber laser at 1950nm is demonstrated. This compact fiber laser is based on a 21-mm-long homemade Tm3＋-doped germanate glass fiber. Over 100...A compact linearly polarized, low-noise, narrow-linewidth, single-frequency fiber laser at 1950nm is demonstrated. This compact fiber laser is based on a 21-mm-long homemade Tm3＋-doped germanate glass fiber. Over 100-mW stable continuous-wave single transverse and longitudinal mode lasing at 195Ohm are achieved. The measured relative intensity noise is less than -135dB/Hz at frequencies over 5 MHz. The signal-to-noise ratio of the laser is larger than 72dB, and the laser linewidth is less than 6kHz, while the obtained linear polarization extinction ratio is higher than 22 dB.展开更多
Effective multiple optoelectronic feedback circuits for simultaneously suppressing low-frequency and relaxation oscillation intensity noise in a single-frequency phosphate fiber laser are demonstrated. The forward tra...Effective multiple optoelectronic feedback circuits for simultaneously suppressing low-frequency and relaxation oscillation intensity noise in a single-frequency phosphate fiber laser are demonstrated. The forward transfer function, which relates the laser output intensity to the pump modulations, is measured and analyzed. A custom two-path feedback system operating at different frequency bands is designed to adjust the pump current directly. The relative intensity noise is decreased by 20dB from 0.2 to 5kHz and over lOdB from 5 to lOkHz. The relaxation oscillation peak is suppressed by 22dB. In addition, a long term （24h） laser instability of less than 0.05% is achieved.展开更多
We report a low noise continuous-wave （CW） single-frequency 1.5-μm laser source obtained by a singly resonant optical parametric oscillator （SRO） based on periodically poled lithium niobate （PPLN）. The SRO was ...We report a low noise continuous-wave （CW） single-frequency 1.5-μm laser source obtained by a singly resonant optical parametric oscillator （SRO） based on periodically poled lithium niobate （PPLN）. The SRO was pumped by a CW single-frequency Nd：YVO4 laser at 1.06μm. The 1.02 W of CW single-frequency signal laser at 1.5 μm was obtained at pump power of 6 W. At the output power of around 0.75 W, the power stability was better than ±l.5% and no mode-hopping was observed in 30 min and frequency stability was better than 8.5 MHz in 1 min. The signal wavelength could be tuned from 1.57 to 1.59 μm by varying the PPLN temperature. The 1.5-μm laser exhibits low noise characteristics, the intensity noise of the laser reaches the shot noise limit （SNL） at an analysis frequency of 4 MHz and the phase noise is less than 1 dB above the SNL at analysis frequencies above 10 MHz.展开更多
We demonstrated a continuous wave(cw) single-frequency intracavity frequency-doubled Nd:YVO_4/LBO laser with 532 nm output of 7.5 W and 1.06 μm output of 3.1 W, and low intensity noise in audio frequency region.To su...We demonstrated a continuous wave(cw) single-frequency intracavity frequency-doubled Nd:YVO_4/LBO laser with 532 nm output of 7.5 W and 1.06 μm output of 3.1 W, and low intensity noise in audio frequency region.To suppress the intensity noise of the high power 532 nm laser, a laser frequency locking system and a feedback loop based on a Mach-Zehnder interferometer were designed and used.The influences of the frequency stabilization and the crucial parameters of the MZI, such as the power splitting ratio of the beam splitters and the locking state of the MZI, on the intensity noise of the 532 nm laser were investigated in detail.After the experimental optimizations, the laser intensity noise in the frequency region from 0.4 kHz to 10 kHz was significantly suppressed.展开更多
A 135 mW single-frequency distributed Bragg reflector fiber laser at 1.95μm was obtained based on a Tm:YAG ceramic-derived all-glass fiber.The fiber laser achieved an optical signal-to-noise ratio of~77 d B.Moreover,...A 135 mW single-frequency distributed Bragg reflector fiber laser at 1.95μm was obtained based on a Tm:YAG ceramic-derived all-glass fiber.The fiber laser achieved an optical signal-to-noise ratio of~77 d B.Moreover,the threshold and linewidth of the single-frequency laser were measured to be 15.4 mW and 4.5 kHz,respectively.In addition,the measured relative intensity noise was less than-140 d B·Hz^(-1)at frequencies of over 10 MHz.The results show that the as-drawn Tm:YAG ceramic-derived all-glass fiber is highly promising for~2μm single-frequency fiber laser applications.展开更多
An efficient narrow=linewidth single-frequency （SF） Yb-doped all-fiber master oscillator power amplifier （MOPA） laser operating at 1064.3 nm is demonstrated experimentally. A ring cavity SF fiber laser is used as ...An efficient narrow=linewidth single-frequency （SF） Yb-doped all-fiber master oscillator power amplifier （MOPA） laser operating at 1064.3 nm is demonstrated experimentally. A ring cavity SF fiber laser is used as the seed source for the MOPA system and the Yb-doped fibers are employed as the gain medium or the saturable absorber. The SF operation is observed to be stable without mode hopping. The highest output power of 266 mW is obtained under the 400row pump power with the corresponding slope efficiency of 66.2-. The Hnewidth of the amplified output laser is approximately I kHz and its optical signal-to-noise ratio is over 45 dB.展开更多
Two models of laser diode pumped unidirectional single-frequency ring laser with maximum single frequency output power of 1 W and 780 mW are investigated.The Statistic linewidth of the free-run laser is measured to be...Two models of laser diode pumped unidirectional single-frequency ring laser with maximum single frequency output power of 1 W and 780 mW are investigated.The Statistic linewidth of the free-run laser is measured to be 2.1 kHz within 5μs by using a single mode fiber link.We use the monolithic laser to measure the angular speed of a spinning motor and simulate a linearly frequency modulated continuous-wave ladar system in laboratory.展开更多
A single-longitudinal-mode(SLM)Tm:YAG ceramic laser under room temperature conditions using double Fabry-Pérot etalons is investigated.The maximum single-frequency output power is 318 mW with a slope efficiency o...A single-longitudinal-mode(SLM)Tm:YAG ceramic laser under room temperature conditions using double Fabry-Pérot etalons is investigated.The maximum single-frequency output power is 318 mW with a slope efficiency of 12.6%.The wavelength tuning range from 2005 nm to 2029 nm is achieved by tuning the obliquity of a 0.1-mm-thick etalon.The single frequency laser has a beam quality of M^(2)=1.3 at the maximum single-frequency output power.The result is reported for the first time to the best of our knowledge.This SLM Tm:YAG ceramic laser can replace the Tm:YAG single crystal laser to be used as the seed laser for LIDAR laser systems.展开更多
We report a low-noise continous-wave single-frequency Nd:YVO4 laser at 1.06μm directly pumped by an 880-nm laser diode.A maximum output power of 22 W is achieved with an optical-to-optical conversion efficiency of 46...We report a low-noise continous-wave single-frequency Nd:YVO4 laser at 1.06μm directly pumped by an 880-nm laser diode.A maximum output power of 22 W is achieved with an optical-to-optical conversion efficiency of 46.3%.The stability of the output is better than ±0.7% in the given four hours.The output beam is almost diffraction-Iimited with a measured beam quality of M^(2)_(x) =1.05 and M^(2)_(y) =1.02.The intensity noise and the phase noise of the laser reach the shot-noise limit at an analysis frequency of 5 MHz.展开更多
Additive and solvent-free direct printing is critical for many applications,including smart electronics,solar cells,healthcare,and electrochemical energy storage.Although a few green techniques for direct patterning o...Additive and solvent-free direct printing is critical for many applications,including smart electronics,solar cells,healthcare,and electrochemical energy storage.Although a few green techniques for direct patterning of inorganic functional materials have been developed,they operate at small scale and require long processing times,restricting their effective translation from laboratory to market.Here we report a fast,liquid-free,cost-effective,and environmentally friendly aerosol-based printing method for fabricating linear or planar structures at microscale dimensions.In situ and on-demand generation of dry aerosol via pulsed laser ablation,coupled with real-time aerodynamical focusing using a co-flowing sheath gas,allows the deposition of a wide variety of materials on various substrates at room temperature and atmospheric pressure.Using silver as a test material,we systematically characterized the laser-generated aerosol deposits in terms of microstructural morphology,sintering activity,mass yield,density,and electrical performance,to show the relationship between process variability and underlying mechanisms.The capacity of high-throughput printing of silver deposits,with thickness up to 160μm,in a single pass was demonstrated.This rapid,efficient,and inkless printing process opens new and exciting opportunities for future applications that require easy-to-integrate components in printed electronic devices.展开更多
A RadioFrequency Quadrupole(RFQ)cooler-buncher system was developed and implemented in a collinear laser spectroscopy setup.This system converts a continuous ion beam into short bunches while enhancing the beam qualit...A RadioFrequency Quadrupole(RFQ)cooler-buncher system was developed and implemented in a collinear laser spectroscopy setup.This system converts a continuous ion beam into short bunches while enhancing the beam quality and reducing the energy spread.The functionality of the RFQ cooler buncher was verified through offline tests with stable rubidium and indium beams delivered from a surface ion source and a laser ablation ion source,respectively.Bunched ion beams with a full width at half maximum of approximately 2μs in the time-of-flight spectrum were successfully achieved with a transmission efficiency exceeding 60%.The implementation of the RFQ cooler-buncher system also significantly improved the overall transmission efficiency of the collinear laser spectroscopy setup.展开更多
基金Supported by the National Key Research and Development Program of China under Grant Nos 2016YFA0301600 and 2016YFA0301602the National Natural Science Foundation of China under Grant Nos 11234008,11474188 and 11704234the Fund for Shanxi'1331 Project'Key Subjects Construction
文摘We study the influence of the phase noises of far detuning single frequency lasers on the lifetime of Bose-Einstein condensation（BEC）of^（87）Rb in an optical dipole trap.As a comparison,we shine a continuous-wave singlefrequency Ti：sapphire laser,an external-cavity diode laser and a phase-locked diode laser on BEC.We measure the heating and lifetime of BEC in two different hyperfine states：｜F=2,m_F=2〉and｜F=1,m_F=1〉.Due to the narrow linewidth and small phase noise,the continuous-wave single-frequency Ti：sapphire laser has less influence on the lifetime of^（87）Rb BEC than the external-cavity diode laser.To reduce the phase noise of the external-cavity diode laser,we use an optical phase-locked loop for the external-cavity diode laser to be locked on a Ti：sapphire laser.The lifetime of BEC is increased when applfying the phase-Jocked diode laser in contrast with the external-cavity diode laser.
基金the National Key Research and Development Program of China(Grant No.2017YFB0405203)the National Natural Science Foundation of China(Grant No.61627821).
文摘A novel Er:YAG laser system operating at 1645 nm with high pulse-repetition-frequency(PRF)of kHz level is demonstrated.A ring cavity with double gain medium end-pumped by two fiber lasers is utilized to obtain high pulse energy.A novel‘triple-reflection’configuration on a piezoelectric actuator(PZT)is adopted to achieve high-repetition-rate at 3-kHz operation with the ramp-fire locking method.Single frequency pulses with maximum average power of 18.3 W at 3 kHz are obtained,and the pulse duration time is 318 ns.The full line width at half maximum(FWHM)of the pulses measured by the heterodyne technique is 1.71 MHz at 3 kHz.To the best of our knowledge,this is the highest PRF single-frequency laser pulses achieved based Er:YAG gain medium.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2017YFB1104500 and 2016YFB0701000)
文摘An injection-seeded single-frequency Q-switched Nd：YAG laser is accomplished by using a phase modulated rampfire technique. A RbTiOPO4（RTP） electro-optic crystal is selected for effective optical path length modulation of the slave self-filtering unstable resonator. This single-frequency laser is capable of producing 50 m J pulse energy at 1 Hz repetition rate with a pulse width of 16 ns. The standard deviation of laser pulse intensity for consecutive 100 shots from the mean pulse intensity is less than 1.05%. A spectral linewidth of less than 0.5 pm with a frequency jitter of about 14 fm over30 min is obtained.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61875214,61535014,and 61775225)Scientific Innovation Fund of Chinese Academy of Sciences(Grant No.CXJJ-17S010)
文摘We propose a method to directly measure phase-related noise characteristics of single-frequency lasers in the 728–980 nm band based on a 120°phase difference interferometer.Differential phase information of the laser under test is demodulated via the interferometer.Other parameters related to the phase noise characteristics such as linewidth at different observation time, phase/frequency noise, power spectrum density of phase/frequency fluctuation, and Allan deviation are further obtained.Frequency noise as low as 1 Hz^2/Hz can be measured using our system.Then the phase-related noise characteristics of two commercial lasers frequently used in cold atomic clocks are studied systematically by the method.Furthermore, several influencing factors and their relative evolution laws are also revealed, such as the pump current and frequency-locking control parameters.This would help to optimize the laser performance, select laser sources, and evaluate the system performance for cold atomic physics applications.
基金supported by the National Key R&D Program of China(Grant No.2024YFA1408900)the National Natural Science Foundation of China(Grant Nos.12204176,12192251,12334014,12404378,12134001,12174113,12174107,12474325,12404379,and 12474378)+1 种基金Quantum Science and Technology-National Science and Technology Major Project(Grant No.2021ZD0301403)Shanghai Municipal Science and Technology Major Project(Grant No.2019SHZDZX01)。
文摘We present a monolithic single-frequency microring laser utilizing Er^(3+)-doped thin film lithium niobate(TFLN)on insulator.The device is fabricated employing a dual-cavity architecture,in which two microring resonators are nested through two pulley coupling regions and share a common semicircular cavity.The singlefrequency laser achieves a peak output power of 146μW,with a side mode suppression ratio of 32 dB and slope efficiency of 0.7%,operating at a wavelength of 1530.85 nm,which leverages gain competition and the Vernier effect.Furthermore,the single-frequency laser emission can be selectively switched between 1530.85 nm and 1547.13 nm by a precise adjustment of the device's structural parameters.Our research establishes the foundation for a fully integrated multifunction TFLN system,which exhibits great potential applications in advancing optical computation,bio-chemical sensing,and signal processing.
基金support from the National Key Research and Development Program of China(2022YFB3606400).
文摘High-power single-frequency fiber lasers with diffraction-limited spots are indispensable for a wide range of photonic applications and are particularly in advanced detection and sensing technologies.However,the simultaneous achievement of kilowatt-level output power and diffraction-limited beam quality has remained elusive in all reported single-frequency fiber laser systems to date,primarily due to limitations imposed by the stimulated Brillouin scattering(SBS)effect and transverse mode instability(TMI)effect.In this study,we demonstrate the design and manufacturing of an ultra-low numerical aperture(NA)functional Yb-doped fiber featuring a bat-type refractive index distribution,specifically engineered for single-frequency laser amplification.In the fabrication,we implemented multiple chelate gas filling and particle deposition iterations,leading to an active fiber with a bat-type refractive index distribution.The unique capabilities of this large mode area and high-order modes leakage fiber(HOMLF)were demonstrated by stably amplifying the single-frequency laser with more than one kilowatt output power and near single mode beam quality(M_(x)^(2)=1.10,M_(x)^(2)=1.18)for the first time.This fiber design advances the leap forward in single-frequency fiber lasers,which could contribute as a novel and efficient laser amplification technique for the next generation of gravitational wave detection systems.
基金This work was supported by the Tenth-Five Research Program and the Excellent Young Teachers Program of Ministry of Education,P.R.China.
文摘Single-frequency 1319-nm laser was obtained by using a laser-diode-pumped monolithic Nd:YAG crystal with a non-planar ring oscillator (NPRO). When the NPRO laser was pumped by an 800-um fiber coupled laser diode, the output power of the single-frequency 1319-nm laser was 220 mW, and the slope efficiency was 16%. With a 100-um fiber coupled diode laser pumped, 99-mW single-frequency 1319-nm laser was obtained with a slope efficiency of 29%.
基金Fundfor Research on Doctoral Programs in Institutions of Higher Learning
文摘Diode pumped monolithic nonplanar ring laser has been developed, yielding single frequency laser and has the advantages of compactness, reliability and high efficiency. Its principles are given in detail and a monolithic nonplanar ring laser is designed. As a result, a laser of hundreds milliwatts cw single frequency output was built up, placed in a magnetic field and pumped by LD. The optical conversion efficiency was more than 15% and the slope efficiency more than 30%. The laser beam had a good quality, with M 2 about 1 2.
基金supported by the National Natural Science Foundation of China(Grant Nos.62222506,62105122 and U21A20506)in part by the Basic and Applied Basic Research Foundation of Guangdong Province(Grant Nos.2021B1515020030,2021A1515011646 and 2022A1515110218)in part by the Guangzhou Science and Technology Program(Grant No.2024A04J9899)
文摘The flexible delivery of single-frequency lasers is far more challenging than that of conventional lasers due to the onset of stimulated Brillouin scattering (SBS).Here we present the successful delivery of 100 W single-frequency laser power through 100 m of anti-resonant hollow-core fiber (AR-HCF) in an all-fiber configuration,with the absence of SBS.By employing a custom-designed AR-HCF with a mode-field diameter matching that of a large-mode-area panda fiber the system achieves high coupling efficiency without the need for free-space components or fiber post-processing.The AR-HCF attains a transmission efficiency of 92%,delivering an output power of 100.3 W with a beam quality factor(M^(2)) of 1.22.The absence of SBS is confirmed through monitoring backward light,which shows no increase in intensity This all-fiber architecture ensures high stability,compactness and efficiency,potentially expanding the application scope of single-frequency lasers in high-precision metrology,optical communication,light detection and ranging systems gravitational wave detection and other advanced applications.
基金Supported by the National High-Technology Research and Development Program of China under Grant Nos 2013AA031502 and 2014AA041902the National Natural Science Foundation of China under Grant Nos 11174085,51132004,and 51302086+3 种基金the Natural Science Foundation of Guangdong Province under Grant Nos S2011030001349 and S20120011380the China National Funds for Distinguished Young Scientists under Grant No 61325024the Science and Technology Project of Guangdong Province under Grant No 2013B090500028the ’Cross and Cooperative’ Science and Technology Innovation Team Project of Chinese Academy of Sciences under Grant No 2012-119
文摘A compact linearly polarized, low-noise, narrow-linewidth, single-frequency fiber laser at 1950nm is demonstrated. This compact fiber laser is based on a 21-mm-long homemade Tm3＋-doped germanate glass fiber. Over 100-mW stable continuous-wave single transverse and longitudinal mode lasing at 195Ohm are achieved. The measured relative intensity noise is less than -135dB/Hz at frequencies over 5 MHz. The signal-to-noise ratio of the laser is larger than 72dB, and the laser linewidth is less than 6kHz, while the obtained linear polarization extinction ratio is higher than 22 dB.
基金Supported by the National High-Technology Research and Development Program of China under Grant Nos 2013AA031502 and 2014AA041902the National Natural Science Foundation of China under Grant Nos 11174085,51132004,and 51302086+3 种基金the Guangdong Natural Science Foundation under Grant Nos S2011030001349 and S20120011380the China National Funds for Distinguished Young Scientists under Grant No 61325024the Science and Technology Project of Guangdong Province under Grant No 2013B090500028the’Cross and Cooperative’Science and Technology Innovation Team Project of Chinese Academy of Sciences under Grant No 2012-119
文摘Effective multiple optoelectronic feedback circuits for simultaneously suppressing low-frequency and relaxation oscillation intensity noise in a single-frequency phosphate fiber laser are demonstrated. The forward transfer function, which relates the laser output intensity to the pump modulations, is measured and analyzed. A custom two-path feedback system operating at different frequency bands is designed to adjust the pump current directly. The relative intensity noise is decreased by 20dB from 0.2 to 5kHz and over lOdB from 5 to lOkHz. The relaxation oscillation peak is suppressed by 22dB. In addition, a long term （24h） laser instability of less than 0.05% is achieved.
基金supported by the National Natural Science Foundation of China(Grant No.60878003)the Science Fund for Excellent Research Team of the National Natural Science Foundation of China(Grant No.60821004)the National Basic Research Program of China(Grant No.2010CB923101)
文摘We report a low noise continuous-wave （CW） single-frequency 1.5-μm laser source obtained by a singly resonant optical parametric oscillator （SRO） based on periodically poled lithium niobate （PPLN）. The SRO was pumped by a CW single-frequency Nd：YVO4 laser at 1.06μm. The 1.02 W of CW single-frequency signal laser at 1.5 μm was obtained at pump power of 6 W. At the output power of around 0.75 W, the power stability was better than ±l.5% and no mode-hopping was observed in 30 min and frequency stability was better than 8.5 MHz in 1 min. The signal wavelength could be tuned from 1.57 to 1.59 μm by varying the PPLN temperature. The 1.5-μm laser exhibits low noise characteristics, the intensity noise of the laser reaches the shot noise limit （SNL） at an analysis frequency of 4 MHz and the phase noise is less than 1 dB above the SNL at analysis frequencies above 10 MHz.
基金Project supported by the National Key R&D Program of China(Grant No.2016YFA0301401)
文摘We demonstrated a continuous wave(cw) single-frequency intracavity frequency-doubled Nd:YVO_4/LBO laser with 532 nm output of 7.5 W and 1.06 μm output of 3.1 W, and low intensity noise in audio frequency region.To suppress the intensity noise of the high power 532 nm laser, a laser frequency locking system and a feedback loop based on a Mach-Zehnder interferometer were designed and used.The influences of the frequency stabilization and the crucial parameters of the MZI, such as the power splitting ratio of the beam splitters and the locking state of the MZI, on the intensity noise of the 532 nm laser were investigated in detail.After the experimental optimizations, the laser intensity noise in the frequency region from 0.4 kHz to 10 kHz was significantly suppressed.
基金Project supported by the Yunnan Fundamental Research Projects(Grant No.202201AU070065)Natural Science Foundation of China for Young Scholars(Grant No.52002131)+1 种基金Open Fund of the Guangdong Provincial Key Laboratory of Fiber Laser Materials and Applied Techniques(Grant No.2021-04)the Scientific Research Fund Project of Yunnan Provincial Department of Education(Grant No.2022J0591)
文摘A 135 mW single-frequency distributed Bragg reflector fiber laser at 1.95μm was obtained based on a Tm:YAG ceramic-derived all-glass fiber.The fiber laser achieved an optical signal-to-noise ratio of~77 d B.Moreover,the threshold and linewidth of the single-frequency laser were measured to be 15.4 mW and 4.5 kHz,respectively.In addition,the measured relative intensity noise was less than-140 d B·Hz^(-1)at frequencies of over 10 MHz.The results show that the as-drawn Tm:YAG ceramic-derived all-glass fiber is highly promising for~2μm single-frequency fiber laser applications.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61475125 and 61505162the Foundation of the Education Committee of Shaanxi Province under Grant Nos 16JK1769 and l4JK1756the Science Foundation of Northwest University under Grant Nos 15NW07 and 13NW14
文摘An efficient narrow=linewidth single-frequency （SF） Yb-doped all-fiber master oscillator power amplifier （MOPA） laser operating at 1064.3 nm is demonstrated experimentally. A ring cavity SF fiber laser is used as the seed source for the MOPA system and the Yb-doped fibers are employed as the gain medium or the saturable absorber. The SF operation is observed to be stable without mode hopping. The highest output power of 266 mW is obtained under the 400row pump power with the corresponding slope efficiency of 66.2-. The Hnewidth of the amplified output laser is approximately I kHz and its optical signal-to-noise ratio is over 45 dB.
文摘Two models of laser diode pumped unidirectional single-frequency ring laser with maximum single frequency output power of 1 W and 780 mW are investigated.The Statistic linewidth of the free-run laser is measured to be 2.1 kHz within 5μs by using a single mode fiber link.We use the monolithic laser to measure the angular speed of a spinning motor and simulate a linearly frequency modulated continuous-wave ladar system in laboratory.
基金Supported by the Program of Excellent Team in Harbin Institute of Technology.
文摘A single-longitudinal-mode(SLM)Tm:YAG ceramic laser under room temperature conditions using double Fabry-Pérot etalons is investigated.The maximum single-frequency output power is 318 mW with a slope efficiency of 12.6%.The wavelength tuning range from 2005 nm to 2029 nm is achieved by tuning the obliquity of a 0.1-mm-thick etalon.The single frequency laser has a beam quality of M^(2)=1.3 at the maximum single-frequency output power.The result is reported for the first time to the best of our knowledge.This SLM Tm:YAG ceramic laser can replace the Tm:YAG single crystal laser to be used as the seed laser for LIDAR laser systems.
基金Supported by the National Natural Science Foundation of China under Grant No 60878003the National Basic Research Program of China(2010CB923101)the National High-tech R&D Program of China(2011AA030203).
文摘We report a low-noise continous-wave single-frequency Nd:YVO4 laser at 1.06μm directly pumped by an 880-nm laser diode.A maximum output power of 22 W is achieved with an optical-to-optical conversion efficiency of 46.3%.The stability of the output is better than ±0.7% in the given four hours.The output beam is almost diffraction-Iimited with a measured beam quality of M^(2)_(x) =1.05 and M^(2)_(y) =1.02.The intensity noise and the phase noise of the laser reach the shot-noise limit at an analysis frequency of 5 MHz.
基金financial support from the China Scholarship Council(No.202108220036)Advanced Microscopy Laboratory in Trinity College Dublin。
文摘Additive and solvent-free direct printing is critical for many applications,including smart electronics,solar cells,healthcare,and electrochemical energy storage.Although a few green techniques for direct patterning of inorganic functional materials have been developed,they operate at small scale and require long processing times,restricting their effective translation from laboratory to market.Here we report a fast,liquid-free,cost-effective,and environmentally friendly aerosol-based printing method for fabricating linear or planar structures at microscale dimensions.In situ and on-demand generation of dry aerosol via pulsed laser ablation,coupled with real-time aerodynamical focusing using a co-flowing sheath gas,allows the deposition of a wide variety of materials on various substrates at room temperature and atmospheric pressure.Using silver as a test material,we systematically characterized the laser-generated aerosol deposits in terms of microstructural morphology,sintering activity,mass yield,density,and electrical performance,to show the relationship between process variability and underlying mechanisms.The capacity of high-throughput printing of silver deposits,with thickness up to 160μm,in a single pass was demonstrated.This rapid,efficient,and inkless printing process opens new and exciting opportunities for future applications that require easy-to-integrate components in printed electronic devices.
基金supported by the National Natural Science Foundation of China(Nos.12027809,12350007)National Key R&D Program of China(Nos.2022YFA1605100,2023YFA1606403,and 2023YFE0101600)+1 种基金New Cornerstone Science Foundation through the XPLORER PRIZEfunding from the European Research Council(ERC)under the European Union’s Horizon 2020 research and innovation program under grant agreement No.679038.
文摘A RadioFrequency Quadrupole(RFQ)cooler-buncher system was developed and implemented in a collinear laser spectroscopy setup.This system converts a continuous ion beam into short bunches while enhancing the beam quality and reducing the energy spread.The functionality of the RFQ cooler buncher was verified through offline tests with stable rubidium and indium beams delivered from a surface ion source and a laser ablation ion source,respectively.Bunched ion beams with a full width at half maximum of approximately 2μs in the time-of-flight spectrum were successfully achieved with a transmission efficiency exceeding 60%.The implementation of the RFQ cooler-buncher system also significantly improved the overall transmission efficiency of the collinear laser spectroscopy setup.
