To investigate the wind⁃induced vibration re⁃sponse characteristics of multispan double⁃layer cable photo⁃voltaic(PV)support structures,wind tunnel tests using an aeroelastic model were carried out to obtain the wind⁃...To investigate the wind⁃induced vibration re⁃sponse characteristics of multispan double⁃layer cable photo⁃voltaic(PV)support structures,wind tunnel tests using an aeroelastic model were carried out to obtain the wind⁃induced vibration response data of a three⁃span four⁃row double⁃layer cable PV support system.The wind⁃induced vibration characteristics with different PV module tilt angles,wind speeds,and wind direction angles were analyzed.The results showed that the double⁃layer cable large⁃span flexible PV support can effectively control the wind⁃induced vibration response and prevent the occur⁃rence of flutter under strong wind conditions.The maxi⁃mum value of the wind⁃induced vibration displacement of the flexible PV support system occurs in the windward first row.The upstream module has a significant shading effect on the downstream module,with a maximum effect of 23%.The most unfavorable wind direction angles of the structure are 0°and 180°.The change of the wind direction angle in the range of 0°to 30°has little effect on the wind vi⁃bration response.The change in the tilt angle of the PV modules has a greater impact on the wind vibration in the downwind direction and a smaller impact in the upwind di⁃rection.Special attention should be paid to the structural wind⁃resistant design of such systems in the upwind side span.展开更多
Synergistic interplays involving multiple active centers originating from TiO2 nanotube layers(TNT)and ruthenium(Ru)species comprising of both single atoms(SAs)and nanoparticles(NPs)augment the alkaline hydrogen evolu...Synergistic interplays involving multiple active centers originating from TiO2 nanotube layers(TNT)and ruthenium(Ru)species comprising of both single atoms(SAs)and nanoparticles(NPs)augment the alkaline hydrogen evolution reaction(HER)by enhancing Volmer kinetics from rapid water dissociation and improving Tafel kinetics from efficient H*desorption.Atomic layer deposition of Ru with 50 process cycles results in a mixture of Ru SAs and 2.8-0.4 nm NPs present on TNT layers,and it emerges with the highest HER activity among all the electrodes synthesized.A detailed study of the Ti and Ru species using different high-resolution techniques confirmed the presence of Ti^(3+)states and the coexistence of Ru SAs and NPs.With insights from literature,the role of Ti^(3+),appropriate work functions of TNT layers and Ru,and the synergistic effect of Ru SAs and Ru NPs in improving the performance of alkaline HER were elaborated and justified.The aforementioned characteristics led to a remarkable performance by having 9mV onset potentials and 33 mV dec^(-1) of Tafel slopes and a higher turnover frequency of 1.72 H2 s^(-1) at 30 mV.Besides,a notable stability from 28 h staircase chronopotentiometric measurements for TNT@Ru surpasses TNT@Pt in comparison.展开更多
Quantum spin Hall state usually emerges in non-magnetic systems,which are typically incompatible withferromagnetism.Here,we predict that two-dimensional(2D)ferrovalley semiconductor single-layer(SL)2HNbTe_(2)can be tr...Quantum spin Hall state usually emerges in non-magnetic systems,which are typically incompatible withferromagnetism.Here,we predict that two-dimensional(2D)ferrovalley semiconductor single-layer(SL)2HNbTe_(2)can be transformed into a 2D room-temperature quantum spin Hall insulator through hydrogen(H)atom adsorption.The SL 2H-NbTe_(2) is found to possess a giant spontaneous valley polarization of 274 meV,which is much larger than those of most available ferrovalley materials.Upon H atom adsorption,a transitionfrom ferromagnetism to non-magnetism emerges.More interestingly,H-adsorbed NbTe_(2) is predicted to be aquantum spin Hall insulator with a direct band gap of 110meV(equal to a working temperature of 1267 K).The predicted rich quantum effects render the 2H-NbTe_(2) a promising candidate for practical valleytronic andtopological electronics.展开更多
Insulated underground cables have the potential to reduce power outages, maintenance costs, and transmission losses compared to overhead lines.</span><span style="font-family:""> </span&g...Insulated underground cables have the potential to reduce power outages, maintenance costs, and transmission losses compared to overhead lines.</span><span style="font-family:""> </span><span style="font-family:""><span style="font-family:Verdana;">On the other hand, they are exposed to several risks and physical damages, since they are buried in the ground. Though the cables are armoured in order to provide mec</span><span style="font-family:Verdana;">hanical protection and achieve tensile strength, and also to provide effective conductance of earth fault currents.</span></span><span style="font-family:""> </span><span style="font-family:Verdana;">The main purpose of this paper is to introduce insulated underground cables, armouring process, and to analyze the induced currents in metallic parts such as sheath and armour </span><span style="font-family:Verdana;">that causeohmic losses which are categorized mainly in two groups as circulating current and eddy current. This paper presents a review on analytical techniques used to analyze the effect of magnetic fields, andcalculate the losses in </span><span style="font-family:Verdana;">the armour of the cables,</span><span style="font-family:""> </span><span style="font-family:Verdana;">besides providing the strategies and solutions used for armour loss reduction.展开更多
The high-cycle fatigue fracture characteristics and damage mechanism of nickel-based single crystal superalloys at 850℃ was investigated.The results indicate that high-cycle fatigue cracks in single crystal superallo...The high-cycle fatigue fracture characteristics and damage mechanism of nickel-based single crystal superalloys at 850℃ was investigated.The results indicate that high-cycle fatigue cracks in single crystal superalloys generally originate from defect locations on the subsurface or interior of the specimen at 850℃.Under the condition of stress ratio R=0.05,as the fatigue load decreases,the high-cycle fatigue life gradually increases.The high-cycle fatigue fracture is mainly characterized by octahedral slip mechanism.At high stress and low lifespan,the fracture exhibits single or multiple slip surface features.Some fractures originate along a vertical small plane and then propagate along the{111}slip surface.At low stress and high lifespan,the fracture surface tend to alternate and expand along multiple slip planes after originating from subsurface or internal sources,exhibiting characteristics of multiple slip planes.Through electron backscatter diffraction and transmission electron microscope analysis,there is obvious oxidation behavior on the surface of the high-cycle fatigue fracture,and the fracture section is composed of oxidation layer,distortion layer,and matrix layer from the outside to the inside.Among them,the main components of the oxidation layer are oxides of Ni and Co.The distortion layer is mainly distributed in the form of elongated or short rod-shaped oxides of Al,Ta,and W.The matrix layer is a single crystal layer.Crack initiation and propagation mechanism were obtained by systematical analysis of a large number of highcycle fatigue fractures.In addition,the stress ratio of 0.05 is closer to the vibration mode of turbine blades during actual service,providing effective guidance for the study of failure and fracture mechanisms of turbine blades.展开更多
SnO2 hollow nanospheres were successfully synthesized via a facile one-step solvothermal method.Characterizations show that the as-prepared SnO2 spheres are of hollow structure with a diameter at around 50 nm,and espe...SnO2 hollow nanospheres were successfully synthesized via a facile one-step solvothermal method.Characterizations show that the as-prepared SnO2 spheres are of hollow structure with a diameter at around 50 nm,and especially,the shell of the spheres is assembled by single layer SnO2 nanocrystals.The surface area of the material reaches up to 202.5 m^2/g.As an anode material for Li ion batteries,the sample exhibited improved electrochemical performance compared with commercial SnO2 particles.After cycled at high current rate of 0.5 C,1 C and 0.5 C for 20 cycles,respectively,the electrode can maintain a capacity of 509 mAh/g.The suitable shell thickness/diameter ratio endows the good structural stability of the material during cycling,which promises the excellent cycling performance of the electrode.The large surface area and the ultra thin shell ensure the high rate performance of the material.展开更多
In this study, the moving velocitiy of precursor solitons, of the flow in depressed region, and of the zero-crossing of the trailing wavetrain relative to the moving disturbance for single-layer flow over topography w...In this study, the moving velocitiy of precursor solitons, of the flow in depressed region, and of the zero-crossing of the trailing wavetrain relative to the moving disturbance for single-layer flow over topography were theorecticaly determined in terms of the mass and energy conservation theorems, and were examined with numerical calculations showing good agreement with theoretical results.展开更多
Noble single‐atom catalysts have rapidly been attracting attention due to their unique catalytic properties and maximized utilization.Atomic layer deposition(ALD)is an emerging powerful technique for large‐scale syn...Noble single‐atom catalysts have rapidly been attracting attention due to their unique catalytic properties and maximized utilization.Atomic layer deposition(ALD)is an emerging powerful technique for large‐scale synthesis of stable single atom.In this review,we summarize recent developments of single atom synthesized by ALD as well as explore future research direction and trends.展开更多
Single layer two-way grid shell with in-plane and out-of-plane tension members is a new type of single-layer latticed shell roofs. Compared with traditional single-layer latticed shells,this new type has a unique mesh...Single layer two-way grid shell with in-plane and out-of-plane tension members is a new type of single-layer latticed shell roofs. Compared with traditional single-layer latticed shells,this new type has a unique mesh form and excellent rigidity. In order to further understand the buckling behaviors of single layer two-way grid cylindrical shell roof with tension members,the buckling experiments have been undertaken to investigate the effect of tension members,in either out-of-plane or in-plane placement. A single layer two-way grid cylindrical shell roof with out-of-plane tension members has been tested under symmetric and asymmetric loading. The tension member placement,the introducing initial axial force to tension members and the load patterns are considered to investigate the buckling behavior. Experimental results indicate that four long out-ofplane tension members work well under symmetrical loading,but only two long out-of-plane tension members work under asymmetrical loading. It can be concluded that the PC bar members used as tension members for this study are useful in the construction of a single layer two-way grid cylindrical shell roof with structural members intersecting at small angles.展开更多
In the adjoint-state method, the forward-propagated source wavefield and the backward-propagated receiver wavefield must be available simultaneously either for seismic imaging in migration or for gradient calculation ...In the adjoint-state method, the forward-propagated source wavefield and the backward-propagated receiver wavefield must be available simultaneously either for seismic imaging in migration or for gradient calculation in inversion. A feasible way to avoid the excessive storage demand is to reconstruct the source wavefield backward in time by storing the entire history of the wavefield in perfectly matched layers. In this paper, we make full use of the elementwise global property of the Laplace operator of the spectral element method (SEM) and propose an efficient source wavefield reconstruction method at the cost of storing the wavefield history only at single boundary layer nodes. Numerical experiments indicate that the accuracy of the proposed method is identical to that of the conventional method and is independent of the order of the Lagrange polynomials, the element type, and the temporal discretization method. In contrast, the memory-saving ratios of the conventional method versus our method is at least N when using either quadrilateral or hexahedron elements, respectively, where N is the order of the Lagrange polynomials used in the SEM. A higher memorysaving ratio is achieved with triangular elements versus quadrilaterals. The new method is applied to reverse time migration by considering the Marmousi model as a benchmark. Numerical results demonstrate that the method is able to provide the same result as the conventional method but with about 1/25 times lower storage demand. With the proposed wavefield reconstruction method, the storage demand is dramatically reduced;therefore, in-core memory storage is feasible even for large-scale three-dimensional adjoint inversion problems.展开更多
We focus on the single layer formulation which provides an integral equation of the first kind that is very badly conditioned. The condition number of the unpreconditioned system increases exponentially with the multi...We focus on the single layer formulation which provides an integral equation of the first kind that is very badly conditioned. The condition number of the unpreconditioned system increases exponentially with the multiscale levels. A remedy utilizing overlapping domain decompositions applied to the Boundary Element Method by means of wavelets is examined. The width of the overlapping of the subdomains plays an important role in the estimation of the eigenvalues as well as the condition number of the additive domain decomposition operator. We examine the convergence analysis of the domain decomposition method which depends on the wavelet levels and on the size of the subdomain overlaps. Our theoretical results related to the additive Schwarz method are corroborated by numerical outputs.展开更多
Two-dimensional atomic-layered material is a recent research focus, and single layer Ta205 used as gate dielectric in field-effect transistors is obtained via assemblies of Ta205 nanosheets. However, the electrical pe...Two-dimensional atomic-layered material is a recent research focus, and single layer Ta205 used as gate dielectric in field-effect transistors is obtained via assemblies of Ta205 nanosheets. However, the electrical performance is seriously affected by electronic defects existing in Ta2Os. Therefore, spectroscopic ellipsometry is used to calculate the transition energies and corresponding probabilities for two different charged oxygen vacancies, whose existence is revealed by x-ray photoelectron spectroscopy analysis. Spectroscopic ellipsometry fitting also calculates the thickness of single layer Ta2Os, exhibiting good agreement with atomic force microscopy measurement. Nondestructive and noncontact spectroscopic ellipsometry is appropriate for detecting the electrical defects level of single layer Ta2O5.展开更多
In order to develop the high-efficiency and precision machining technique of TiCp/Ti - 6Al-4V particulate reinforced titanium matrix composites （PTMCs）, high-speed grinding experiments were conducted using the singl...In order to develop the high-efficiency and precision machining technique of TiCp/Ti - 6Al-4V particulate reinforced titanium matrix composites （PTMCs）, high-speed grinding experiments were conducted using the single-layer electroplated cubic boron nitride （CBN） wheel and brazed CBN wheel, respectively. The comparative grinding performance was studied in terms of grinding force, grinding temperature, grinding-induced surface features and defects. The results display that the grinding forces and grinding temperature obtained with the brazed CBN wheel are always lower than those with the electroplated CBN wheel. Though the voids and microcracks are the dominant grinding-induced surface defects, the brazed CBN wheel produces less surface defects compared to the electroplated wheel according to the statistical analysis results. The max mum materials removal rate with the brazed CBN wheel is much higher than that with the electroplated one. All above indicate that the single-layer brazed CBN super-abrasive wheel is more suitable for high-speed grinding of PTMCs than the electroplated counterpart.展开更多
This paper studies the exciton-longitudinal-optical-phonon coupling in InGaN/GaN single quantum wells with various cap layer thicknesses by low temperature photoluminescence （PL） measurements. With increasing cap la...This paper studies the exciton-longitudinal-optical-phonon coupling in InGaN/GaN single quantum wells with various cap layer thicknesses by low temperature photoluminescence （PL） measurements. With increasing cap layer thickness, the PL peak energy shifts to lower energy and the coupling strength between the exciton and longitudinal- optical （LO） phonon, described by Huang-Rhys factor, increases remarkably due to an enhancement of the internal electric field. With increasing excitation intensity, the zero-phonon peak shows a blueshift and the Huang-Rhys factor decreases. These results reveal that there is a large built-in electric field in the well layer and the exciton-LO-phonon coupling is strongly affected by the thickness of the cap layer.展开更多
The stability of single layer armour units on low crested and submerged breakwaters has been investigated in 2D hydraulic model tests. Armour unit movements including settlements, rocking and displacements have been d...The stability of single layer armour units on low crested and submerged breakwaters has been investigated in 2D hydraulic model tests. Armour unit movements including settlements, rocking and displacements have been determined. The effect of freeboard, packing density and wave steepness on the armour layer stability on crest, front and rear slope has been investigated. Armour units were mostly displaced in the most upper part of the seaward slope and at the seaward side of the crest. Damage on the crest was progressing towards the rear slope. About 40% to 50% larger armour units are required on the seaward slope and crest of low crested structures （as compared to conventional high crested breakwaters）. About 35% larger armour units are required on the rear slope. Larger armour units are not required on submerged breakwaters if the water depth on the crest exceeds 40% of design wave height.展开更多
Ionospheric delay error is considered to be one of the most prominent factors impacting the Global Navigation Satellite Systems(GNSS) positioning and navigation accuracies. Due to dispersive nature and anisotropic of ...Ionospheric delay error is considered to be one of the most prominent factors impacting the Global Navigation Satellite Systems(GNSS) positioning and navigation accuracies. Due to dispersive nature and anisotropic of the ionosphere above certain regions, the positioning accuracy is seriously affected when using a precision-limited model. In this paper, an attempt has been taken to estimate ionosphere-delays based on Planar Fit(PF) and Spherical Harmonic Function(SHF) models by applying the commonly used single layer Model(SLM) and an extended single layer model(ESLM) which has been explored sparsely over the region. The results show that ESLM of PF and SHF techniques performed better in estimating ionospheric delay compared to the existing SLM model. Although the performance of the ESLM approach is almost comparable to the SLM results during the quiet ionospheric conditions, the ESLM-PF and ESLMSHF models led to respective improvements of 4.66% and 7.14% over the classically used SLM model under the disturbed ionospheric conditions. In view of the uneven variability of equatorial/low latitude ionosphere above the Indian subcontinental region, the suitability of ESLM-PF and ESLM-SHF models has been emphasized and suggested for assessing its completeness and reliableness across other parts of the globe. The output of this work may be useful for high precession GNSS positioning through mitigating the ionospheric delays under quiet as well as varied ionospheric conditions across the low/equatorial latitude regions.展开更多
This paper examines the steady thermocapillarybuoyant convection in a shallow annular pool subjected to a radial temperature gradient. A matched asymptotic theory is used to obtain the asymptotic solutions of the flow...This paper examines the steady thermocapillarybuoyant convection in a shallow annular pool subjected to a radial temperature gradient. A matched asymptotic theory is used to obtain the asymptotic solutions of the flow and thermal fields in the case of small aspect ratios,which is defined as the ratio of the layer thickness to the gap width. The flow domain is divided into the core region away from the cylinder walls and two end regions near each cylinder wall. Asymptotic solutions are obtained in the core region by solving the core and end flows separately and then joining them through matched asymptotic expansions. For the system of silicon melt,the asymptotic solutions are compared with the results of numerical simulations. It is found that the two kinds of solutions have a good agreement in the core region for a small aspect ratio. With the increase of aspect ratio,the applicability of the present asymptotic solutions decreases gradually.展开更多
Arising from the increasing demand for electric vehicles(EVs),Ni-rich LiNi_(x)Co_(y)Mn_(z)O_(2)(NCM,x+y+z=1,x≥0.8)cathode with greatly increased energy density are being researched and commercialized for lithium-ion ...Arising from the increasing demand for electric vehicles(EVs),Ni-rich LiNi_(x)Co_(y)Mn_(z)O_(2)(NCM,x+y+z=1,x≥0.8)cathode with greatly increased energy density are being researched and commercialized for lithium-ion batteries(LIBs).However,parasitic crack formation during the discharge–charge cycling process remains as a major degradation mechanism.Cracking leads to increase in the specific surface area,loss of electrical contact between the primary particles,and facilitates liquid electrolyte infiltration into the cathode active material,accelerating capacity fading and decrease in lifetime.In contrast,Ni-rich NCM when used as a single crystal exhibits superior cycling performances due to its rigid mechanical property that resists cracking during long charge–discharge process even under harsh conditions.In this paper,we present comparative investigation between single crystal Ni-rich LiNi_(0.92)Co_(0.04)Mn_(0.04)O_(2)(SC)and polycrystalline Ni-rich LiNi_(0.92)Co_(0.04)Mn_(0.04)O_(2)(PC).The relatively improved cycling performances of SC are attributed to smaller anisotropic volume change,higher reversibility of phase transition,and resistance to crack formation.The superior properties of SC are demonstrated by in situ characterization and battery tests.Consequently,it is inferred from the results obtained that optimization of preparation conditions can be regarded as a key approach to obtain well crystallized and superior electrochemical performances.展开更多
The employment of single atom catalysts(SACs)remarkably increases atomic utilization and catalytic efficiency in various electrochemical processes,especially when coupled with metal clusters/nanoparticles.However,the ...The employment of single atom catalysts(SACs)remarkably increases atomic utilization and catalytic efficiency in various electrochemical processes,especially when coupled with metal clusters/nanoparticles.However,the synergistic effects mainly focus on the energetics of key intermediates during the electrocatalysis,while the properties of electrode surface and electric-double-layer(EDL)structure are largely overlooked.Herein,we report the synthesis of Ru nanoparticles integrated with neighboring Ru single atoms on nitrogen doped carbon(Ru1,n/NC)as efficient catalysts toward hydrogen oxidation reaction(HOR)under alkaline electrolytes.Electrochemical data,in situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy,and density functional theory calculations reveal that the positively charged Ru single atoms could lead to the dynamically regulated proportion of strongly hydrogen-bonded interfacial water structure with O-down conformation and optimized connectivity of the hydrogen-bond network in the EDL region,which contribute to the accelerated diffusion of hydroxide ions to the electrified interfaces.Consequently,the obtained Ru1,n/NC catalyst displays remarkable HOR performance with the mass activity of 1.15 mAμgPGM^(-1) under alkaline electrolyte.This work demonstrates the promise of single atoms for interfacial water environment adjustment and mass transfer process modulation,providing new insights into rational design of highly-effective SAC-based electrocatalysts.展开更多
The vertical two-dimensional non-hydrostatic pressure models with multiple layers can make prediction more accurate than those obtained by the hydrostatic pres- sure assumption. However, they are time-consuming and un...The vertical two-dimensional non-hydrostatic pressure models with multiple layers can make prediction more accurate than those obtained by the hydrostatic pres- sure assumption. However, they are time-consuming and unstable, which makes them unsuitable for wider application. In this study, an efficient model with a single layer is developed. Decomposing the pressure into the hydrostatic and dynamic components and integrating the x-momentum equation from the bottom to the free surface can yield a horizontal momentum equation, in which the terms relevant to the dynamic pressure are discretized semi-implicitly. The convective terms in the vertical momentum equation are ignored, and the rest of the equation is approximated with the Keller-box scheme. The velocities expressed as the unknown dynamic pressure are substituted into the continuity equation, resulting in a tri-diagonal linear system solved by the Thomas algorithm. The validation of solitary and sinusoidal waves indicates that the present model can provide comparable results to the models with multiple layers but at much lower computation cost.展开更多
基金The National Natural Science Foundation of China(No.52338011).
文摘To investigate the wind⁃induced vibration re⁃sponse characteristics of multispan double⁃layer cable photo⁃voltaic(PV)support structures,wind tunnel tests using an aeroelastic model were carried out to obtain the wind⁃induced vibration response data of a three⁃span four⁃row double⁃layer cable PV support system.The wind⁃induced vibration characteristics with different PV module tilt angles,wind speeds,and wind direction angles were analyzed.The results showed that the double⁃layer cable large⁃span flexible PV support can effectively control the wind⁃induced vibration response and prevent the occur⁃rence of flutter under strong wind conditions.The maxi⁃mum value of the wind⁃induced vibration displacement of the flexible PV support system occurs in the windward first row.The upstream module has a significant shading effect on the downstream module,with a maximum effect of 23%.The most unfavorable wind direction angles of the structure are 0°and 180°.The change of the wind direction angle in the range of 0°to 30°has little effect on the wind vi⁃bration response.The change in the tilt angle of the PV modules has a greater impact on the wind vibration in the downwind direction and a smaller impact in the upwind di⁃rection.Special attention should be paid to the structural wind⁃resistant design of such systems in the upwind side span.
基金support from the European Union Horizon 2020 program(project HERMES,nr.952184)the Ministry of Education,Youth and Sports of the Czech Republic for supporting CEMNAT(LM2023037)+1 种基金Czech-NanoLab(LM2023051)infrastructures for providing ALD,SEM,EDX,XPS,TEM,and XRDCzech Science Foundation(project 23-08019X,EXPRO).
文摘Synergistic interplays involving multiple active centers originating from TiO2 nanotube layers(TNT)and ruthenium(Ru)species comprising of both single atoms(SAs)and nanoparticles(NPs)augment the alkaline hydrogen evolution reaction(HER)by enhancing Volmer kinetics from rapid water dissociation and improving Tafel kinetics from efficient H*desorption.Atomic layer deposition of Ru with 50 process cycles results in a mixture of Ru SAs and 2.8-0.4 nm NPs present on TNT layers,and it emerges with the highest HER activity among all the electrodes synthesized.A detailed study of the Ti and Ru species using different high-resolution techniques confirmed the presence of Ti^(3+)states and the coexistence of Ru SAs and NPs.With insights from literature,the role of Ti^(3+),appropriate work functions of TNT layers and Ru,and the synergistic effect of Ru SAs and Ru NPs in improving the performance of alkaline HER were elaborated and justified.The aforementioned characteristics led to a remarkable performance by having 9mV onset potentials and 33 mV dec^(-1) of Tafel slopes and a higher turnover frequency of 1.72 H2 s^(-1) at 30 mV.Besides,a notable stability from 28 h staircase chronopotentiometric measurements for TNT@Ru surpasses TNT@Pt in comparison.
基金supported by the National Natural Science Foundation of China(Grant No.11874092)the Fok Ying Tong Education Foundation,China(Grant No.161005)+2 种基金the Science Fund for Distinguished Young Scholars of Hunan Province(Grant No.2021JJ10039)the Planned Science and Technology Project of Hunan Province(Grant No.2017RS3034)the Postgraduate Scientific Research Innovation Project of Hunan Province(Grant No.CX20240080)。
文摘Quantum spin Hall state usually emerges in non-magnetic systems,which are typically incompatible withferromagnetism.Here,we predict that two-dimensional(2D)ferrovalley semiconductor single-layer(SL)2HNbTe_(2)can be transformed into a 2D room-temperature quantum spin Hall insulator through hydrogen(H)atom adsorption.The SL 2H-NbTe_(2) is found to possess a giant spontaneous valley polarization of 274 meV,which is much larger than those of most available ferrovalley materials.Upon H atom adsorption,a transitionfrom ferromagnetism to non-magnetism emerges.More interestingly,H-adsorbed NbTe_(2) is predicted to be aquantum spin Hall insulator with a direct band gap of 110meV(equal to a working temperature of 1267 K).The predicted rich quantum effects render the 2H-NbTe_(2) a promising candidate for practical valleytronic andtopological electronics.
文摘Insulated underground cables have the potential to reduce power outages, maintenance costs, and transmission losses compared to overhead lines.</span><span style="font-family:""> </span><span style="font-family:""><span style="font-family:Verdana;">On the other hand, they are exposed to several risks and physical damages, since they are buried in the ground. Though the cables are armoured in order to provide mec</span><span style="font-family:Verdana;">hanical protection and achieve tensile strength, and also to provide effective conductance of earth fault currents.</span></span><span style="font-family:""> </span><span style="font-family:Verdana;">The main purpose of this paper is to introduce insulated underground cables, armouring process, and to analyze the induced currents in metallic parts such as sheath and armour </span><span style="font-family:Verdana;">that causeohmic losses which are categorized mainly in two groups as circulating current and eddy current. This paper presents a review on analytical techniques used to analyze the effect of magnetic fields, andcalculate the losses in </span><span style="font-family:Verdana;">the armour of the cables,</span><span style="font-family:""> </span><span style="font-family:Verdana;">besides providing the strategies and solutions used for armour loss reduction.
基金National Science and Technology Major Project(J2019-VI-0022-0138)。
文摘The high-cycle fatigue fracture characteristics and damage mechanism of nickel-based single crystal superalloys at 850℃ was investigated.The results indicate that high-cycle fatigue cracks in single crystal superalloys generally originate from defect locations on the subsurface or interior of the specimen at 850℃.Under the condition of stress ratio R=0.05,as the fatigue load decreases,the high-cycle fatigue life gradually increases.The high-cycle fatigue fracture is mainly characterized by octahedral slip mechanism.At high stress and low lifespan,the fracture exhibits single or multiple slip surface features.Some fractures originate along a vertical small plane and then propagate along the{111}slip surface.At low stress and high lifespan,the fracture surface tend to alternate and expand along multiple slip planes after originating from subsurface or internal sources,exhibiting characteristics of multiple slip planes.Through electron backscatter diffraction and transmission electron microscope analysis,there is obvious oxidation behavior on the surface of the high-cycle fatigue fracture,and the fracture section is composed of oxidation layer,distortion layer,and matrix layer from the outside to the inside.Among them,the main components of the oxidation layer are oxides of Ni and Co.The distortion layer is mainly distributed in the form of elongated or short rod-shaped oxides of Al,Ta,and W.The matrix layer is a single crystal layer.Crack initiation and propagation mechanism were obtained by systematical analysis of a large number of highcycle fatigue fractures.In addition,the stress ratio of 0.05 is closer to the vibration mode of turbine blades during actual service,providing effective guidance for the study of failure and fracture mechanisms of turbine blades.
基金financially supported by the National Basic Research Program of China(Nos.2010CB934700,2013CB934004,2011CB935704)National Natural Science Foundation of China(No.11079002)
文摘SnO2 hollow nanospheres were successfully synthesized via a facile one-step solvothermal method.Characterizations show that the as-prepared SnO2 spheres are of hollow structure with a diameter at around 50 nm,and especially,the shell of the spheres is assembled by single layer SnO2 nanocrystals.The surface area of the material reaches up to 202.5 m^2/g.As an anode material for Li ion batteries,the sample exhibited improved electrochemical performance compared with commercial SnO2 particles.After cycled at high current rate of 0.5 C,1 C and 0.5 C for 20 cycles,respectively,the electrode can maintain a capacity of 509 mAh/g.The suitable shell thickness/diameter ratio endows the good structural stability of the material during cycling,which promises the excellent cycling performance of the electrode.The large surface area and the ultra thin shell ensure the high rate performance of the material.
文摘In this study, the moving velocitiy of precursor solitons, of the flow in depressed region, and of the zero-crossing of the trailing wavetrain relative to the moving disturbance for single-layer flow over topography were theorecticaly determined in terms of the mass and energy conservation theorems, and were examined with numerical calculations showing good agreement with theoretical results.
基金supported by the Natural Science and Engineering Research Council of Canada (NSERC)the Canada Research Chair Program (CRC) and the University of Western Ontario (UWO)
文摘Noble single‐atom catalysts have rapidly been attracting attention due to their unique catalytic properties and maximized utilization.Atomic layer deposition(ALD)is an emerging powerful technique for large‐scale synthesis of stable single atom.In this review,we summarize recent developments of single atom synthesized by ALD as well as explore future research direction and trends.
基金Sponsored by the Postdoctoral Science Foundation of China(Grant No.2015M571422)Heilongjiang Province Postdoctoral Science Foundation(Grant No.LBH-Z14095)"Young Talents"Project of Northeast Agricultural University(Grant No.14QC50)
文摘Single layer two-way grid shell with in-plane and out-of-plane tension members is a new type of single-layer latticed shell roofs. Compared with traditional single-layer latticed shells,this new type has a unique mesh form and excellent rigidity. In order to further understand the buckling behaviors of single layer two-way grid cylindrical shell roof with tension members,the buckling experiments have been undertaken to investigate the effect of tension members,in either out-of-plane or in-plane placement. A single layer two-way grid cylindrical shell roof with out-of-plane tension members has been tested under symmetric and asymmetric loading. The tension member placement,the introducing initial axial force to tension members and the load patterns are considered to investigate the buckling behavior. Experimental results indicate that four long out-ofplane tension members work well under symmetrical loading,but only two long out-of-plane tension members work under asymmetrical loading. It can be concluded that the PC bar members used as tension members for this study are useful in the construction of a single layer two-way grid cylindrical shell roof with structural members intersecting at small angles.
基金financial support for this work contributed by the National Key Research and Development Program of China (grant numbers 2016YFC0600101 and 2016YFC 0600201)the National Natural Science Foundation of China (grant numbers 41874065, 41604076, 41674102, 41674095, 41522401, 41574082, and 41774097)
文摘In the adjoint-state method, the forward-propagated source wavefield and the backward-propagated receiver wavefield must be available simultaneously either for seismic imaging in migration or for gradient calculation in inversion. A feasible way to avoid the excessive storage demand is to reconstruct the source wavefield backward in time by storing the entire history of the wavefield in perfectly matched layers. In this paper, we make full use of the elementwise global property of the Laplace operator of the spectral element method (SEM) and propose an efficient source wavefield reconstruction method at the cost of storing the wavefield history only at single boundary layer nodes. Numerical experiments indicate that the accuracy of the proposed method is identical to that of the conventional method and is independent of the order of the Lagrange polynomials, the element type, and the temporal discretization method. In contrast, the memory-saving ratios of the conventional method versus our method is at least N when using either quadrilateral or hexahedron elements, respectively, where N is the order of the Lagrange polynomials used in the SEM. A higher memorysaving ratio is achieved with triangular elements versus quadrilaterals. The new method is applied to reverse time migration by considering the Marmousi model as a benchmark. Numerical results demonstrate that the method is able to provide the same result as the conventional method but with about 1/25 times lower storage demand. With the proposed wavefield reconstruction method, the storage demand is dramatically reduced;therefore, in-core memory storage is feasible even for large-scale three-dimensional adjoint inversion problems.
文摘We focus on the single layer formulation which provides an integral equation of the first kind that is very badly conditioned. The condition number of the unpreconditioned system increases exponentially with the multiscale levels. A remedy utilizing overlapping domain decompositions applied to the Boundary Element Method by means of wavelets is examined. The width of the overlapping of the subdomains plays an important role in the estimation of the eigenvalues as well as the condition number of the additive domain decomposition operator. We examine the convergence analysis of the domain decomposition method which depends on the wavelet levels and on the size of the subdomain overlaps. Our theoretical results related to the additive Schwarz method are corroborated by numerical outputs.
基金supported by the National Natural Science Foundation of China(Grant Nos.11174058 and 61376093)the Fund from Shanghai Municipal Science and Technology Commission(Grant No.13QA1400400)+1 种基金the National Science and Technology Major Project,China(Grant No.2011ZX02707)the Innovation Program of Shanghai Municipal Education Commission(Grant No.12ZZ010)
文摘Two-dimensional atomic-layered material is a recent research focus, and single layer Ta205 used as gate dielectric in field-effect transistors is obtained via assemblies of Ta205 nanosheets. However, the electrical performance is seriously affected by electronic defects existing in Ta2Os. Therefore, spectroscopic ellipsometry is used to calculate the transition energies and corresponding probabilities for two different charged oxygen vacancies, whose existence is revealed by x-ray photoelectron spectroscopy analysis. Spectroscopic ellipsometry fitting also calculates the thickness of single layer Ta2Os, exhibiting good agreement with atomic force microscopy measurement. Nondestructive and noncontact spectroscopic ellipsometry is appropriate for detecting the electrical defects level of single layer Ta2O5.
基金the financial support for this work by the National Natural Science Foundation of China (No.51235004 and No.51375235)the Fundamental Research Funds for the Central Universities (No.NE2014103)the Science and Technology Supporting Program of Jiangsu Province (No.BE2013109 and No.BY2014003-008)
文摘In order to develop the high-efficiency and precision machining technique of TiCp/Ti - 6Al-4V particulate reinforced titanium matrix composites （PTMCs）, high-speed grinding experiments were conducted using the single-layer electroplated cubic boron nitride （CBN） wheel and brazed CBN wheel, respectively. The comparative grinding performance was studied in terms of grinding force, grinding temperature, grinding-induced surface features and defects. The results display that the grinding forces and grinding temperature obtained with the brazed CBN wheel are always lower than those with the electroplated CBN wheel. Though the voids and microcracks are the dominant grinding-induced surface defects, the brazed CBN wheel produces less surface defects compared to the electroplated wheel according to the statistical analysis results. The max mum materials removal rate with the brazed CBN wheel is much higher than that with the electroplated one. All above indicate that the single-layer brazed CBN super-abrasive wheel is more suitable for high-speed grinding of PTMCs than the electroplated counterpart.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60876007 and 10974165)the Research Program of Xiamen Municipal Science and Technology Bureau,China (Grant No. 2006AA03Z110)
文摘This paper studies the exciton-longitudinal-optical-phonon coupling in InGaN/GaN single quantum wells with various cap layer thicknesses by low temperature photoluminescence （PL） measurements. With increasing cap layer thickness, the PL peak energy shifts to lower energy and the coupling strength between the exciton and longitudinal- optical （LO） phonon, described by Huang-Rhys factor, increases remarkably due to an enhancement of the internal electric field. With increasing excitation intensity, the zero-phonon peak shows a blueshift and the Huang-Rhys factor decreases. These results reveal that there is a large built-in electric field in the well layer and the exciton-LO-phonon coupling is strongly affected by the thickness of the cap layer.
文摘The stability of single layer armour units on low crested and submerged breakwaters has been investigated in 2D hydraulic model tests. Armour unit movements including settlements, rocking and displacements have been determined. The effect of freeboard, packing density and wave steepness on the armour layer stability on crest, front and rear slope has been investigated. Armour units were mostly displaced in the most upper part of the seaward slope and at the seaward side of the crest. Damage on the crest was progressing towards the rear slope. About 40% to 50% larger armour units are required on the seaward slope and crest of low crested structures （as compared to conventional high crested breakwaters）. About 35% larger armour units are required on the rear slope. Larger armour units are not required on submerged breakwaters if the water depth on the crest exceeds 40% of design wave height.
文摘Ionospheric delay error is considered to be one of the most prominent factors impacting the Global Navigation Satellite Systems(GNSS) positioning and navigation accuracies. Due to dispersive nature and anisotropic of the ionosphere above certain regions, the positioning accuracy is seriously affected when using a precision-limited model. In this paper, an attempt has been taken to estimate ionosphere-delays based on Planar Fit(PF) and Spherical Harmonic Function(SHF) models by applying the commonly used single layer Model(SLM) and an extended single layer model(ESLM) which has been explored sparsely over the region. The results show that ESLM of PF and SHF techniques performed better in estimating ionospheric delay compared to the existing SLM model. Although the performance of the ESLM approach is almost comparable to the SLM results during the quiet ionospheric conditions, the ESLM-PF and ESLMSHF models led to respective improvements of 4.66% and 7.14% over the classically used SLM model under the disturbed ionospheric conditions. In view of the uneven variability of equatorial/low latitude ionosphere above the Indian subcontinental region, the suitability of ESLM-PF and ESLM-SHF models has been emphasized and suggested for assessing its completeness and reliableness across other parts of the globe. The output of this work may be useful for high precession GNSS positioning through mitigating the ionospheric delays under quiet as well as varied ionospheric conditions across the low/equatorial latitude regions.
基金supported by the National Natural Science Foundation of China (50776102)the Fundamental Research Funds for the Central Universities (CDJXS10142248)
文摘This paper examines the steady thermocapillarybuoyant convection in a shallow annular pool subjected to a radial temperature gradient. A matched asymptotic theory is used to obtain the asymptotic solutions of the flow and thermal fields in the case of small aspect ratios,which is defined as the ratio of the layer thickness to the gap width. The flow domain is divided into the core region away from the cylinder walls and two end regions near each cylinder wall. Asymptotic solutions are obtained in the core region by solving the core and end flows separately and then joining them through matched asymptotic expansions. For the system of silicon melt,the asymptotic solutions are compared with the results of numerical simulations. It is found that the two kinds of solutions have a good agreement in the core region for a small aspect ratio. With the increase of aspect ratio,the applicability of the present asymptotic solutions decreases gradually.
基金supported by the Technology Innovation Program(RS-2023-00256202Development of MLCB design and manufacturing process technology for board mounting)funded By the Ministry of Trade,Industry&Energy(MOTIE,Korea)+2 种基金supported by the Technology Innovation Program(or Industrial Strategic Technology Development Program-Public-private joint investment semiconductor R&D program(K-CHIPS)to foster high-quality human resources)(RS-2023-00237003,High selectivity etching technology using cryoetch)funded By the Ministry of Trade,Industry&Energy(MOTIE,Korea)supported by 2022 Research Grant from Kangwon National University(No.202203080001)supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(RS-2023-00280367).
文摘Arising from the increasing demand for electric vehicles(EVs),Ni-rich LiNi_(x)Co_(y)Mn_(z)O_(2)(NCM,x+y+z=1,x≥0.8)cathode with greatly increased energy density are being researched and commercialized for lithium-ion batteries(LIBs).However,parasitic crack formation during the discharge–charge cycling process remains as a major degradation mechanism.Cracking leads to increase in the specific surface area,loss of electrical contact between the primary particles,and facilitates liquid electrolyte infiltration into the cathode active material,accelerating capacity fading and decrease in lifetime.In contrast,Ni-rich NCM when used as a single crystal exhibits superior cycling performances due to its rigid mechanical property that resists cracking during long charge–discharge process even under harsh conditions.In this paper,we present comparative investigation between single crystal Ni-rich LiNi_(0.92)Co_(0.04)Mn_(0.04)O_(2)(SC)and polycrystalline Ni-rich LiNi_(0.92)Co_(0.04)Mn_(0.04)O_(2)(PC).The relatively improved cycling performances of SC are attributed to smaller anisotropic volume change,higher reversibility of phase transition,and resistance to crack formation.The superior properties of SC are demonstrated by in situ characterization and battery tests.Consequently,it is inferred from the results obtained that optimization of preparation conditions can be regarded as a key approach to obtain well crystallized and superior electrochemical performances.
文摘The employment of single atom catalysts(SACs)remarkably increases atomic utilization and catalytic efficiency in various electrochemical processes,especially when coupled with metal clusters/nanoparticles.However,the synergistic effects mainly focus on the energetics of key intermediates during the electrocatalysis,while the properties of electrode surface and electric-double-layer(EDL)structure are largely overlooked.Herein,we report the synthesis of Ru nanoparticles integrated with neighboring Ru single atoms on nitrogen doped carbon(Ru1,n/NC)as efficient catalysts toward hydrogen oxidation reaction(HOR)under alkaline electrolytes.Electrochemical data,in situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy,and density functional theory calculations reveal that the positively charged Ru single atoms could lead to the dynamically regulated proportion of strongly hydrogen-bonded interfacial water structure with O-down conformation and optimized connectivity of the hydrogen-bond network in the EDL region,which contribute to the accelerated diffusion of hydroxide ions to the electrified interfaces.Consequently,the obtained Ru1,n/NC catalyst displays remarkable HOR performance with the mass activity of 1.15 mAμgPGM^(-1) under alkaline electrolyte.This work demonstrates the promise of single atoms for interfacial water environment adjustment and mass transfer process modulation,providing new insights into rational design of highly-effective SAC-based electrocatalysts.
基金Project supported by the Specialized Research Fund for the Doctoral Program of Higher Education(No. 20110142110064)the Ministry of Water Resources’ Science and Technology Promotion Plan Program (No. TG1316)
文摘The vertical two-dimensional non-hydrostatic pressure models with multiple layers can make prediction more accurate than those obtained by the hydrostatic pres- sure assumption. However, they are time-consuming and unstable, which makes them unsuitable for wider application. In this study, an efficient model with a single layer is developed. Decomposing the pressure into the hydrostatic and dynamic components and integrating the x-momentum equation from the bottom to the free surface can yield a horizontal momentum equation, in which the terms relevant to the dynamic pressure are discretized semi-implicitly. The convective terms in the vertical momentum equation are ignored, and the rest of the equation is approximated with the Keller-box scheme. The velocities expressed as the unknown dynamic pressure are substituted into the continuity equation, resulting in a tri-diagonal linear system solved by the Thomas algorithm. The validation of solitary and sinusoidal waves indicates that the present model can provide comparable results to the models with multiple layers but at much lower computation cost.
