期刊文献+
共找到8,875篇文章
< 1 2 250 >
每页显示 20 50 100
Design of DC regulated power supply based on single chip microcomputer
1
作者 轩春青 于景茹 +1 位作者 轩志伟 高静 《Journal of Measurement Science and Instrumentation》 CAS CSCD 2015年第4期373-377,共5页
A DC regulated power supply with numerical control based on single chip microcomputer (SCM) is designed. SCM is the main controller and output voltage o{ DC power supply can be set by keyboard. The analog voltage ca... A DC regulated power supply with numerical control based on single chip microcomputer (SCM) is designed. SCM is the main controller and output voltage o{ DC power supply can be set by keyboard. The analog voltage can be obtained through D/A converter (DAC0832) so that different voltages can be provided by operational amplifier. The output voltage varies from 0 V to 12 V with the incremental value of 0. 1 V. The actual output voltage is shown in the nixietube. This DC regulated power supply is characterized by simple structure and easy operation. 展开更多
关键词 DC regulated power suppy single chip microcomputer (SCM) D/A converter
在线阅读 下载PDF
Design of Intelligent Fire Alarm System for Large Storage Places Based on AVRmega128 Single Chip Microcomputer
2
作者 杨东星 李明儒 +1 位作者 刘南君 毛培宏 《Agricultural Science & Technology》 CAS 2014年第4期692-696,共5页
With principles of reliability, independence, practicality and economical effi- ciency, a set of intelligent fire alarm system based on AVRmega128 single chip microcomputer was designed to solve problems of fire alarm... With principles of reliability, independence, practicality and economical effi- ciency, a set of intelligent fire alarm system based on AVRmega128 single chip microcomputer was designed to solve problems of fire alarm system in many large- scale warehouses. Using advanced flame sensor, 485 bus communication, computer interactive software and related peripheral devices, this intelligent fire alarm system has functions of sound-light alarm and intelligent fire extinguishing. The human-com- puter interactive software was adopted for the remote control of the alarm main control panel through the 485 bus communication. This design of intelligent fire alarm system shows high reference and practical value to the development of intel- ligent alarm products with high integration and high reliability. 展开更多
关键词 AVRmega128 single chip microcomputer 485 bus communication Audi- ble and visual alarm Intelligent fire extinguishing Human-computer interaction
在线阅读 下载PDF
Use of single chip microcomputer in hydraulic digital adaptive control system 被引量:1
3
作者 吴振顺 袁建光 +1 位作者 汲永涛 熊汉文 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2001年第2期196-198,共3页
Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system u... Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system used, which includes a AT89C51 single chip microcomputer, 74Ls373 flip latch, 6116 store, eight bit ADC0809, and so on, and the satisfactory results obtained in study on hydraulic control system. 展开更多
关键词 Adaptive control single chip microcomputer
在线阅读 下载PDF
DESIGNOFMULTI┐SLOTANDUNEQUAL┐TEMPERATUREPIDCONTROLLERBASEDONSINGLECHIPMICROCOMPUTER
4
作者 Ma Weihua He Hai Department of Computer Science and Engineering, NUAA29 Yudao Street, Nanjing 210016, P.R.China 《Transactions of Nanjing University of Aeronautics and Astronautics》 EI 1996年第1期121-124,共4页
Taking a specific production process as an example, this paper introduces the design of multi slot and unequal temperature PID controller based on single chip microcomputer. The mathematical implementation method... Taking a specific production process as an example, this paper introduces the design of multi slot and unequal temperature PID controller based on single chip microcomputer. The mathematical implementation method of PID algorithm and the design method of the hardware and software are discussed, The principle diagram of the hardware circuit implementing the control algorithm and the features of the software possessed are also presented. 展开更多
关键词 real time control temperature measurement HARDWARE SOFTWARE single chip microcomputer
在线阅读 下载PDF
Design and Research of Intelligent Alcohol Detector Based on Single Chip Microcomputer
5
作者 Xiaokan Wang Qiong Wang 《Journal on Internet of Things》 2020年第3期121-127,共7页
In order to prevent drunk driving timely and protect personal safety,a kind of vehicle-loaded alcohol concentration detector based on single chip microcomputer control is designed.The detector usesAT89C51 microcontrol... In order to prevent drunk driving timely and protect personal safety,a kind of vehicle-loaded alcohol concentration detector based on single chip microcomputer control is designed.The detector usesAT89C51 microcontroller as the core,makes use of the gas sensor,A/D converter to detect the alcohol concentration of the breath of the driver,can set different thresholds according to the space of the car model,automatically cut off the ignition circuit for the exceeded threshold,and has the sound and light alarm function,which fundamentally solve the problem of drunk driving.The instrument is compact in size,stable in performance,convenient in installation and debugging,and of practical significance. 展开更多
关键词 single chip microcomputer Alcohol Sensor A/D converter DETECTOR
在线阅读 下载PDF
Design of an Automated Sorting System for Apples Based on Single Chip Microcomputer
6
作者 Liqun WANG Clarence W.DE SILVA +1 位作者 Bing LI Yuan Cai 《Instrumentation》 2019年第4期95-108,共14页
The grading judgment for apples is related to a variety of factors including,size,shape,color,texture,and scars.Traditional manual sorting methods are time consuming and labor intensive.In addition,the accuracy of the... The grading judgment for apples is related to a variety of factors including,size,shape,color,texture,and scars.Traditional manual sorting methods are time consuming and labor intensive.In addition,the accuracy of the method is easily subjective,not repeatable,error-prone,and affected by the sorting environment.This paper presents a complete and automated grading system for apples.The system uses a single-chip microcomputer as the controller of the system,and a PC as the graphics processing unit.It also includes a conveyor,drive motor,frequency converter for motor control,photoelectric sensors,air compressor,and air jets for ejecting the graded apples.The classification algorithm is implemented by using a convolutional neural network(CNN).In order to eliminate contact damage of apples,the system specifically uses air jets as actuators to eject the graded apples into the corresponding bins.At the same time,in order to ensure that an apple triggers the correct ejecting actuator,this paper designs a jet controller with proper logic. 展开更多
关键词 AUTOMATION single chip microcomputer Apple Grading Convolutional Neural Network Air Jets
原文传递
智能水质监测系统设计与实现--以西安思源学院再生水实验室为例
7
作者 徐卓宇 袁媛 +3 位作者 周红涛 张亮 张荐 闫宇航 《现代信息科技》 2025年第15期189-193,198,共6页
文章提出了一种智能水质监测系统的设计,该设计基于STM32F103单片机设计了一款水质监测系统,该系统基于各种水资源指标监测传感器可对监测目标的水位、pH酸碱度、TDS等环境参数进行监测。有助于及时检测并解决水质问题,保障了水资源的... 文章提出了一种智能水质监测系统的设计,该设计基于STM32F103单片机设计了一款水质监测系统,该系统基于各种水资源指标监测传感器可对监测目标的水位、pH酸碱度、TDS等环境参数进行监测。有助于及时检测并解决水质问题,保障了水资源的安全和可持续利用,可以对监测结果进行全方位的显示。在数据传输方面,运用无线通信模块,实现了手机客户端与单片机之间高效、稳定的远程数据连接,实现了实时的远程监测、人机交互,提高了水质监测智能化的水平。 展开更多
关键词 水质监测 STM32F103单片机 智能
在线阅读 下载PDF
基于RISC-V的色彩追踪机械臂系统研究
8
作者 黄立澜 王成锦 蔡甜 《软件》 2025年第1期71-73,共3页
本文介绍一种以CH32V307为核心的可颜色追踪机器人手臂的系统。该系统通过摄像机采集图像,采用彩色辨识算法进行色彩辨识,再通过单片机CH32V307控制机械手的动作,从而完成对被测对象的跟踪。本文对其硬件设计、软件实现及测试结果进行... 本文介绍一种以CH32V307为核心的可颜色追踪机器人手臂的系统。该系统通过摄像机采集图像,采用彩色辨识算法进行色彩辨识,再通过单片机CH32V307控制机械手的动作,从而完成对被测对象的跟踪。本文对其硬件设计、软件实现及测试结果进行了较为详尽的阐述,体现出该机械臂系统在实时性、精确性等方面的优越性。 展开更多
关键词 CH32V307 颜色追踪 机械臂 单片机
在线阅读 下载PDF
无线Wi-Fi粤菜点餐系统设计
9
作者 杜永峰 揭湛 +1 位作者 李泽灏 周思远 《无线互联科技》 2025年第2期56-59,共4页
随着21世纪微电子技术、集成电路、物联网和无线通信技术的快速发展,智能制造和控制已经渗透到人们工作和生活的方方面面,改变着人们的工作方式和生活方式。文章开发一款以智能魔方中枢系统为核心,以无线通信Wi-Fi模块、LCD12864液晶显... 随着21世纪微电子技术、集成电路、物联网和无线通信技术的快速发展,智能制造和控制已经渗透到人们工作和生活的方方面面,改变着人们的工作方式和生活方式。文章开发一款以智能魔方中枢系统为核心,以无线通信Wi-Fi模块、LCD12864液晶显示器等为辅的智能粤菜点餐系统。该系统以单片机为控制核心,采用无线Wi-Fi通信模块实现将各餐桌已点好的菜品传送到手机服务台,手机端可通过App查看处理各餐桌菜单,以方便管理。 展开更多
关键词 单片机 无线通信Wi-Fi模块 LCD12864液晶显示器 按键
在线阅读 下载PDF
模糊-PID控制在柴油机数字式电子调速器中的应用 被引量:9
10
作者 段晖辉 卓斌 高世伦 《内燃机工程》 EI CAS CSCD 北大核心 1998年第4期65-71,共7页
论述了模糊-PID控制理论在柴油机转速调节上的应用。通过MCS-80C196单片机的实现,表明用模糊-PID控制理论构筑的调速器具有适用性广、可靠性高的优点,适于在中高速柴油机上使用。
关键词 调速器 模糊性 控制 单片微型机 柴油机
在线阅读 下载PDF
BOPP薄膜生产线的CC-link现场总线集散控制系统 被引量:3
11
作者 李众 李彦 +2 位作者 俞孟蕻 陈红卫 何祖军 《电气传动》 北大核心 2004年第5期31-35,共5页
介绍了一种 BOPP薄膜生产线的 CC-link现场总线集散控制系统 ,系统采用三菱 Q0 2 CPU PLC,直流传动采用 5 90系列直流调速器 ,多种检测信号通过分布式 I/ O组件 AJ65 SBTB1-16D、F X2 N-3 2 CCL 等 ,经 CC-link传送至 PL C。简要介绍了 ... 介绍了一种 BOPP薄膜生产线的 CC-link现场总线集散控制系统 ,系统采用三菱 Q0 2 CPU PLC,直流传动采用 5 90系列直流调速器 ,多种检测信号通过分布式 I/ O组件 AJ65 SBTB1-16D、F X2 N-3 2 CCL 等 ,经 CC-link传送至 PL C。简要介绍了 BOPP薄膜生产过程及 CC-link结构特点 ,由于该生产线连续作业 ,设备分布较分散约 80 m ,控制过程较为复杂 ,因此整个集散控制系统在功能上由 4个相对独立的子系统组成 ,即速度链传动控制系统 ,温控系统、测厚系统及辅助控制系统。实际应用表明该系统简洁、可靠 ,实时性强 。 展开更多
关键词 集散控制系统 现场总线 CC FX 组件 实时性 分布式I/O BOPP薄膜 生产线 测厚
在线阅读 下载PDF
DMX-1型电子模拟式手弧焊工训练器 被引量:4
12
作者 武传松 王晓明 文春明 《焊接学报》 EI CAS CSCD 北大核心 1992年第2期67-72,共6页
研制了一种单片微机控制的初级手弧焊工训练模拟器,它是机电一体化的焊工训练仿真装置。利用该装置,不需要焊接设备、焊条和钢板,就可完成对手弧焊工基本操作技术的培训。它可以模拟焊条的熔化过程和熔池的二维运动;检测和计算模拟焊条... 研制了一种单片微机控制的初级手弧焊工训练模拟器,它是机电一体化的焊工训练仿真装置。利用该装置,不需要焊接设备、焊条和钢板,就可完成对手弧焊工基本操作技术的培训。它可以模拟焊条的熔化过程和熔池的二维运动;检测和计算模拟焊条的空间位置和姿态;判断焊工操作是否符合规范,并由电弧声模拟与报警系统及时反馈给焊工,同时记录操作过程中失误的次数。本文介绍了该训练器的工作原理、硬件结构及控制软件。 展开更多
关键词 焊工训练 模拟器 单片微机
在线阅读 下载PDF
WSD02-2型多点温湿度监测仪的设计与应用 被引量:6
13
作者 潘建斌 董志坚 宫长荣 《烟草科技》 EI CAS 2003年第8期12-14,共3页
为了准确监测烘烤设备内的温湿度 ,采用单片机和新型数字式温度传感器 ,研制了WSD0 2 - 2型多点温湿度监测仪。该仪器测温范围为 - 5 5℃~ +12 5℃ ,精度达 0 .1℃ ,可同时监测烘烤设备内 10个点的温湿度 ,准确性和稳定性高 ,且信号传... 为了准确监测烘烤设备内的温湿度 ,采用单片机和新型数字式温度传感器 ,研制了WSD0 2 - 2型多点温湿度监测仪。该仪器测温范围为 - 5 5℃~ +12 5℃ ,精度达 0 .1℃ ,可同时监测烘烤设备内 10个点的温湿度 ,准确性和稳定性高 ,且信号传输距离远 ,能够满足烟叶烘烤过程对温湿度监测的需要。 展开更多
关键词 WSD02-2型多点温湿度监测仪 设计 烟叶 单片机 数字式温度传感器 应用 烘烤设备
在线阅读 下载PDF
MCS-51单片机在汽车ABS控制中的应用研究 被引量:5
14
作者 仝秋红 王伟力 张磊 《电子科技》 2006年第4期28-30,共3页
针对汽车ABS控制系统,应用MCS-51系列单片机做为ECU控制器,分析了汽车ABS控制的特点,制定控制方案,对其I/O口﹑定时/计数器﹑中断等进行了编程与设计,在KEIL的μVision2上对程序进行了调试和仿真,仿真结果基本达到了要求。
关键词 ABS 控制 单片机 KEIL 仿真
在线阅读 下载PDF
基于PROFIBUS-DP总线电动机保护器的开发 被引量:3
15
作者 张长勇 李志刚 +1 位作者 刘子胥 李玲玲 《河北工业大学学报》 CAS 2005年第5期23-26,共4页
电工技术中的低压配电和电动机控制系统正在朝着装置智能化、网络化、信号数字化的方向发展.为此,利用单片机和专用协议芯片SPC3开发了带PROFIBUS-DP接口的智能电动机保护器.介绍了保护器和通讯接口的软硬件实现方法,给出了部分原理图... 电工技术中的低压配电和电动机控制系统正在朝着装置智能化、网络化、信号数字化的方向发展.为此,利用单片机和专用协议芯片SPC3开发了带PROFIBUS-DP接口的智能电动机保护器.介绍了保护器和通讯接口的软硬件实现方法,给出了部分原理图和软件流程图.实验证明该保护器保护功能完善、操作方便、通讯可靠,达到了预期设计目标. 展开更多
关键词 单片机 电动机保护 PROFIBUS-DP SPC3
在线阅读 下载PDF
基于MCS-51单片机的自动单道分析器 被引量:2
16
作者 黄建平 谢可夫 周心一 《计算机工程与应用》 CSCD 北大核心 2003年第6期120-122,共3页
论文介绍了一种作者们开发的基于MCS-51单片机的自动单道分析器的硬件与软件原理。该自动单道分析器具有谱数据掉电保护功能,上电自动恢复测谱功能,通用计算机遥控及数据通信功能。该谱仪有很高的自动化水平和数据处理能力。
关键词 MCS-51 单片机 自动单道分析器 穆斯堡尔谱议 Mossbauer谱学 核分析方法
在线阅读 下载PDF
基于PA92的F-P扫描干涉仪设计 被引量:3
17
作者 薛竣文 方宇杰 +1 位作者 谢海军 苏秉华 《光学技术》 CAS CSCD 北大核心 2016年第3期278-280,共3页
使用STM32F103ZET6单片机控制,采用PA92功率放大器驱动压电陶瓷,设计了532nm平平腔结构的F-P扫描干涉仪。腔镜反射率为99%,精细度310,腔长0.1~150mm连续可调,对应自由光谱区1~1500GHz和分辨率3.2~4800MHz连续可调。压电陶瓷... 使用STM32F103ZET6单片机控制,采用PA92功率放大器驱动压电陶瓷,设计了532nm平平腔结构的F-P扫描干涉仪。腔镜反射率为99%,精细度310,腔长0.1~150mm连续可调,对应自由光谱区1~1500GHz和分辨率3.2~4800MHz连续可调。压电陶瓷驱动电压和频率通过编码器调节,可以在0~200V和1~100Hz连续可调,并显示在数码管上。同时可以通过RS232串口与计算机通讯,在上位机使用LabVIEW软件界面方便地设置压电陶瓷驱动电压和频率。使用F-P扫描干涉仪,对激光二极管泵浦Nd:YVO4/KTP绿光激光器纵模进行了测量,验证了整个系统的工作性能稳定可靠。 展开更多
关键词 F-P扫描干涉仪 F-P标准具 激光器 单片机 STM32
原文传递
MCS-51单片机在电子皮带秤自动化中的应用 被引量:12
18
作者 任治斌 张富春 杨延宁 《现代电子技术》 2005年第14期73-74,共2页
电子皮带秤被广泛地应用于矿山、煤炭、化学工业和码头等行业,他是一种非常重要的动态测量系统。利用MCS51单片机特点,在电子皮带秤原有机械结构的基础上加入了由单片机称重的自动控制系统,实现了电子皮带秤调节的自动化。同时,对电子... 电子皮带秤被广泛地应用于矿山、煤炭、化学工业和码头等行业,他是一种非常重要的动态测量系统。利用MCS51单片机特点,在电子皮带秤原有机械结构的基础上加入了由单片机称重的自动控制系统,实现了电子皮带秤调节的自动化。同时,对电子皮带秤自动控制系统中的软件组成以及调节过程进行了详细的阐述,为该系统的广泛应用提供了思路。 展开更多
关键词 MCS-51单片机 电子皮带秤 自动化控制 荷重传感器
在线阅读 下载PDF
基于串口提高MCU-51矩形单脉冲脉宽精度的方法 被引量:3
19
作者 张新宝 王海璇 +1 位作者 周胜利 李宝华 《吉林大学学报(信息科学版)》 CAS 2016年第4期496-500,共5页
为提高传统PWM(Pulse Width Modulation)、软件延时方式所产生的矩形单脉冲的精度,提出一种基于51单片机串口产生矩形单脉冲的方法。控制51单片机(MCU-51)的串行通信口工作于方式3(9位异步通信方式),对外发送特定的数码,利用串口通信中... 为提高传统PWM(Pulse Width Modulation)、软件延时方式所产生的矩形单脉冲的精度,提出一种基于51单片机串口产生矩形单脉冲的方法。控制51单片机(MCU-51)的串行通信口工作于方式3(9位异步通信方式),对外发送特定的数码,利用串口通信中数据帧的特殊结构形成宽度可调的矩形单脉冲;设置定时器T2工作于波特率发生器模式,控制串口的波特率,改变每个数据位的时间宽度,实现多个脉冲宽度值。实验数据表明,该方法产生的矩形单脉冲的脉宽精度能达到硬件晶振精度。 展开更多
关键词 矩形单脉冲 单片机 串口通信 波特率
在线阅读 下载PDF
基于单片机的RS-485总线网络扩展方法 被引量:3
20
作者 王风云 田新诚 丁良 《兵工自动化》 2003年第4期38-40,共3页
基于单片机RS-485总线网络扩展的总线转发器由AT89C51、通信芯片MAX491、上电复位芯片X25045及光电隔离芯片TLP521-4等组成。可为总线添加4个分支,外接128个节点。支路1控制字为56H,支路2为59H,支路3为65H,支路4为95H。打开分支前应关... 基于单片机RS-485总线网络扩展的总线转发器由AT89C51、通信芯片MAX491、上电复位芯片X25045及光电隔离芯片TLP521-4等组成。可为总线添加4个分支,外接128个节点。支路1控制字为56H,支路2为59H,支路3为65H,支路4为95H。打开分支前应关闭全部支路,P1口输出为55H。总线选择时约定命令控制字为0FEH。AT89C5通讯采用串口方式1,波特率8位可变。定时器为可自动装入参数的方式2,采用串口中断,波特率设置与上位机匹配。 展开更多
关键词 单片机 RS-485总线 网络扩展 转发器 远程计量系统 系统结构 工作原理 软件 智能化小区
在线阅读 下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部