On the tasis of study in the mathematical model of 3-dimensional ruled surface (RS),this paper introduces a new concept of distance paramcter (DP) and also puts forward that themethod of modeling a RS depends on not o...On the tasis of study in the mathematical model of 3-dimensional ruled surface (RS),this paper introduces a new concept of distance paramcter (DP) and also puts forward that themethod of modeling a RS depends on not only two boundary curves but also DP. According toabove theory, the formulas to calculate corresponding point coordinates to any kind of top and bot-tom profile of a workpiece and formulas to calcuate the maximum inclination angle of ruling linehave been obtained. Then a different top and bottom RS mathining method including profile withline-are combination as well as parametric curves has been achieved by 4-axes simultancous con-trol programming proposed.展开更多
Chiral molecules, which may contain one or more different type（s） of stereocentres, such as central, axial, planar, and helical chiralities, etc., are indispensable in chemistry, pharmaceutical industry, and life sc...Chiral molecules, which may contain one or more different type（s） of stereocentres, such as central, axial, planar, and helical chiralities, etc., are indispensable in chemistry, pharmaceutical industry, and life science. Despite many advances for the preparation of chiral molecules usually with a single type of chirality have been realized, simultaneous construction of different types of chiralities is still a significant challenge. Here, we wish to report a protocol for preparation of chiral allenes with both central and axial chiralities via a catalytic asymmetric allenylation of different biologically or syn- thetically useful fluorinated or non-fluorinated nucleophiles with readily available racemic allenes by using a single chiral ligand. An echoing between the central chirality and axial chirality for the enantioselectivity was observed. This strategy provides a general and practical approach to functionalized optically active allenes bearing both central and axial chiralities with an excellent enantioselectivity under mild conditions.展开更多
A novel temperature fluctuation synthesis/simultaneous densification process was developed for the preparation of Ti3SiC2 bulk ceramics. In this process. Si is used as an in-situ liquid forming phase and it is favorab...A novel temperature fluctuation synthesis/simultaneous densification process was developed for the preparation of Ti3SiC2 bulk ceramics. In this process. Si is used as an in-situ liquid forming phase and it is favorable for both the solid-liquid synthesis and the densification of Ti3SiC2 rainies. The present work demonstrated that the temperature fluctuation synthesis/simultaneous densification process is one of the most effective and simple methods for the preparation of Ti3SiC2 bulk materials providing relatively low synthesis temperature. short reaction time; and simultaneous synthesis and densification. This work also showed the capability to control the microstructure, e.g., the preferred orientation, of the bulk Ti3SiC2 materials simply by applying the hot pressing pressure at different Stages of the temperature fluctuation process. And textured Ti3SiC2 bulk materials with {002} faces of laminated Ti3SiC2 grains normal to the hot pressing axis were prepared.展开更多
This paper deal with optimal control problems for a non-stationary Stokes system. We study a simultaneous distributed-boundary optimal control problem with distributed observation. We prove the existence and uniquenes...This paper deal with optimal control problems for a non-stationary Stokes system. We study a simultaneous distributed-boundary optimal control problem with distributed observation. We prove the existence and uniqueness of a simultaneous optimal control and we give the first order optimality condition for this problem. We also consider a distributed optimal control problem and a boundary optimal control problem and we obtain estimations between the simultaneous optimal control and the optimal controls of these last ones. Finally, some regularity results are presented.展开更多
The application of a closed-loop specification oriented feedback control design method, which addresses the design of controllers to satisfy multiple simultaneous conflicting closed-loop performance specifications is ...The application of a closed-loop specification oriented feedback control design method, which addresses the design of controllers to satisfy multiple simultaneous conflicting closed-loop performance specifications is presented. The proposed approach is well suited to the design of controllers which must meet a set of conflicting performance specifications. Gain tuning is central to the design process, however, the tuning process is greatly simplified over that presented by the problem of tuning a PID controller for example. The proposed control method is applied to an AC induction motor, with an inner-loop flux vector controller applied to design a position control system. Experimental results verify the effectiveness of this method.展开更多
Chinese rice wine making is a typical simultaneous saccharification and fermentation （SSF） process. During the fermentation process, temperature is one of the key parameters which decide the quality of Chinese rice ...Chinese rice wine making is a typical simultaneous saccharification and fermentation （SSF） process. During the fermentation process, temperature is one of the key parameters which decide the quality of Chinese rice wine. To optimize the SSF process for Chinese rice wine brewing, the effects of temperature on the kinetic parameters of yeast growth and ethanol production at various temperatures were determined in batch cultures using a mathematical model. The kinetic parameters as a function of temperature were evaluated using the software Origin8.0. Combing these functions with the mathematical model, an appropriate form of the model equations for the SSF considering the effects of temperature were developed. The kinetic parameters were found to fit the experimental data satisfactorily with the developed temperature-dependent model. The temperature profile for maximizing the ethanol production for rice wine fermentation was determined by genetic algorithm. The optimum temperature profile began at a low temperature of 26℃ up to 30 h. The operating temperature increased rapidly to 31.9 ℃, and then decreased slowly to 18℃ at 65 h. Thereafter, the temperature was maintained at 18 ℃ until the end of fermentation. A maximum ethanol production of 89.3 g.L 1 was attained. Conceivably, our model would facilitate the improvement of Chinese rice wine production at the industrial scale.展开更多
This paper considers the simultaneous attack problem of multiple missiles against a maneuvering target. Different from most of the existing literature in which the simultaneous attack problem is formulated as a consen...This paper considers the simultaneous attack problem of multiple missiles against a maneuvering target. Different from most of the existing literature in which the simultaneous attack problem is formulated as a consensus problem of missiles＇ time-to-go estimates, this paper formulates it as the consensus problem of missiles＇ ranges-to-go. Based on this strategy, novel distributed guidance laws are proposed to solve the simultaneous attack problem with the target of unknown maneuverability.Adaptive control method is introduced to estimate the upper bound of the target＇s acceleration. The effectiveness of the proposed guidance laws is verified both theoretically and numerically.展开更多
文摘On the tasis of study in the mathematical model of 3-dimensional ruled surface (RS),this paper introduces a new concept of distance paramcter (DP) and also puts forward that themethod of modeling a RS depends on not only two boundary curves but also DP. According toabove theory, the formulas to calculate corresponding point coordinates to any kind of top and bot-tom profile of a workpiece and formulas to calcuate the maximum inclination angle of ruling linehave been obtained. Then a different top and bottom RS mathining method including profile withline-are combination as well as parametric curves has been achieved by 4-axes simultancous con-trol programming proposed.
文摘Chiral molecules, which may contain one or more different type（s） of stereocentres, such as central, axial, planar, and helical chiralities, etc., are indispensable in chemistry, pharmaceutical industry, and life science. Despite many advances for the preparation of chiral molecules usually with a single type of chirality have been realized, simultaneous construction of different types of chiralities is still a significant challenge. Here, we wish to report a protocol for preparation of chiral allenes with both central and axial chiralities via a catalytic asymmetric allenylation of different biologically or syn- thetically useful fluorinated or non-fluorinated nucleophiles with readily available racemic allenes by using a single chiral ligand. An echoing between the central chirality and axial chirality for the enantioselectivity was observed. This strategy provides a general and practical approach to functionalized optically active allenes bearing both central and axial chiralities with an excellent enantioselectivity under mild conditions.
基金the National Outstanding YOung Scientist Foundation Under Grant !No.59925208 the National Natural Science Foundation of China
文摘A novel temperature fluctuation synthesis/simultaneous densification process was developed for the preparation of Ti3SiC2 bulk ceramics. In this process. Si is used as an in-situ liquid forming phase and it is favorable for both the solid-liquid synthesis and the densification of Ti3SiC2 rainies. The present work demonstrated that the temperature fluctuation synthesis/simultaneous densification process is one of the most effective and simple methods for the preparation of Ti3SiC2 bulk materials providing relatively low synthesis temperature. short reaction time; and simultaneous synthesis and densification. This work also showed the capability to control the microstructure, e.g., the preferred orientation, of the bulk Ti3SiC2 materials simply by applying the hot pressing pressure at different Stages of the temperature fluctuation process. And textured Ti3SiC2 bulk materials with {002} faces of laminated Ti3SiC2 grains normal to the hot pressing axis were prepared.
基金partially supported by PIP No.0534 from CONICET-Univ.AustralPPI No.18C417 from SECy T-UNRCpartially supported by AVENTURES-ANR-12-BLAN-BS01-0001-01
文摘This paper deal with optimal control problems for a non-stationary Stokes system. We study a simultaneous distributed-boundary optimal control problem with distributed observation. We prove the existence and uniqueness of a simultaneous optimal control and we give the first order optimality condition for this problem. We also consider a distributed optimal control problem and a boundary optimal control problem and we obtain estimations between the simultaneous optimal control and the optimal controls of these last ones. Finally, some regularity results are presented.
文摘The application of a closed-loop specification oriented feedback control design method, which addresses the design of controllers to satisfy multiple simultaneous conflicting closed-loop performance specifications is presented. The proposed approach is well suited to the design of controllers which must meet a set of conflicting performance specifications. Gain tuning is central to the design process, however, the tuning process is greatly simplified over that presented by the problem of tuning a PID controller for example. The proposed control method is applied to an AC induction motor, with an inner-loop flux vector controller applied to design a position control system. Experimental results verify the effectiveness of this method.
基金Supported by the National Natural Science Foundation of China(21276111,21206053,61305017)the Programme of Introducing Talents of Discipline to Universities(B12018)+2 种基金Fundamental Research Funds for the Central Universities(JUSRP11558)the Natural Science Foundation of Jiangsu Province(no.BK20160162)the Fundamental Research Funds for the Central Universities(JUSRP51510)
文摘Chinese rice wine making is a typical simultaneous saccharification and fermentation （SSF） process. During the fermentation process, temperature is one of the key parameters which decide the quality of Chinese rice wine. To optimize the SSF process for Chinese rice wine brewing, the effects of temperature on the kinetic parameters of yeast growth and ethanol production at various temperatures were determined in batch cultures using a mathematical model. The kinetic parameters as a function of temperature were evaluated using the software Origin8.0. Combing these functions with the mathematical model, an appropriate form of the model equations for the SSF considering the effects of temperature were developed. The kinetic parameters were found to fit the experimental data satisfactorily with the developed temperature-dependent model. The temperature profile for maximizing the ethanol production for rice wine fermentation was determined by genetic algorithm. The optimum temperature profile began at a low temperature of 26℃ up to 30 h. The operating temperature increased rapidly to 31.9 ℃, and then decreased slowly to 18℃ at 65 h. Thereafter, the temperature was maintained at 18 ℃ until the end of fermentation. A maximum ethanol production of 89.3 g.L 1 was attained. Conceivably, our model would facilitate the improvement of Chinese rice wine production at the industrial scale.
基金supported by the National Natural Science Foundation of China under Grant Nos.61473005,11332001,and 61471242the Research Project Fund under Grant No.17-163-11-ZT-003-018-01+2 种基金the Air Force Advance Research Fund under Grant No.303020503the Joint Fund of Equipment development and Aerospace Science and Technology under Grant No.6141B0624050101the National Defense Basic Scientific Research Program(Major)of China
文摘This paper considers the simultaneous attack problem of multiple missiles against a maneuvering target. Different from most of the existing literature in which the simultaneous attack problem is formulated as a consensus problem of missiles＇ time-to-go estimates, this paper formulates it as the consensus problem of missiles＇ ranges-to-go. Based on this strategy, novel distributed guidance laws are proposed to solve the simultaneous attack problem with the target of unknown maneuverability.Adaptive control method is introduced to estimate the upper bound of the target＇s acceleration. The effectiveness of the proposed guidance laws is verified both theoretically and numerically.
