This article focuses on the teaching of circuit foundation courses in vocational colleges and explores in depth the application of MWorks simulation software.By analyzing the limitations of traditional circuit foundat...This article focuses on the teaching of circuit foundation courses in vocational colleges and explores in depth the application of MWorks simulation software.By analyzing the limitations of traditional circuit foundation course teaching,this article elaborates on the advantages of MWorks software in teaching,including intuitive presentation of circuit principles,provision of rich component libraries,and powerful analysis functions.Detailed teaching practice cases based on the software were introduced,such as simple circuit construction and analysis,complex circuit fault troubleshooting,etc.,and the application effect was demonstrated by comparing actual teaching data.The results show that MWorks simulation software effectively enhances students’learning interest,practical ability,and theoretical knowledge mastery,providing strong support for the improvement of the teaching quality of circuit foundation courses in vocational colleges.展开更多
This article aims to explore the teaching mode of using MWorks simulation software to promote teaching in circuit fundamentals courses in vocational colleges through competitions.By analyzing the limitations of tradit...This article aims to explore the teaching mode of using MWorks simulation software to promote teaching in circuit fundamentals courses in vocational colleges through competitions.By analyzing the limitations of traditional teaching,this article elaborates on the functional advantages of MWorks software and its specific application methods in promoting teaching through competitions,including how to combine skill competitions for teaching design,organizing internal selection and training,and other aspects.Practice has shown that this model effectively enhances students’professional skills,innovation ability,and teamwork spirit,while also promoting the improvement of teachers’teaching level.Finally,the problems encountered during the application process were reflected upon,and improvement suggestions were proposed,providing a reference for relevant teaching reforms in vocational colleges.展开更多
The track model used in the dynamic analysis and design system software is investigated. A home made tank is taken as an example to illustrate the method for modeling an integral tracked vehicle and perform the dynam...The track model used in the dynamic analysis and design system software is investigated. A home made tank is taken as an example to illustrate the method for modeling an integral tracked vehicle and perform the dynamic simulation. The obtained results have demonstrated that the simulation method has the advantage of high efficiency, more convenience and more insight into the dynamical behavior of the system.展开更多
Modeling technology has been introduced into software testing field. However, how to carry through the testing modeling effectively is still a difficulty. Based on combination of simulation modeling technology and emb...Modeling technology has been introduced into software testing field. However, how to carry through the testing modeling effectively is still a difficulty. Based on combination of simulation modeling technology and embedded real-time software testing method, the process of simulation testing modeling is studied first. And then, the supporting environment of simulation testing modeling is put forward. Furthermore, an approach of embedded real-time software simulation testing modeling including modeling of cross-linked equipments of system under testing （SUT）, test case, testing scheduling, and testing system service is brought forward. Finally, the formalized description and execution system of testing models are given, with which we can realize real-time, closed loop, mad automated system testing for embedded real-time software.展开更多
A computer software to simulate the phase transformation during quenching is designed based on Avrami equation and Scheil additivity principle of incubation period. The isothermal transformation diagrams of supercool...A computer software to simulate the phase transformation during quenching is designed based on Avrami equation and Scheil additivity principle of incubation period. The isothermal transformation diagrams of supercooled austenite are described by cubic spline functions. This software is possess of a good graphic interface of Windows style, can simulate the whole process in austenite decomposition during continuous cooling. If the cooling rate was given, the fraction of various microstructures transformed of austenite decomposition during continuous cooling at any temperature can be calculated. The simulation results are checked with the quenching experiment of 45 steel. The results indicate that the simulation results are comparatively close to the experimental results.展开更多
According to the characteristic of Team Software Process （TSP）, it adopts a hierarchy-based model combined discrete event model with system dynamics model. This model represents TSP as form of two levels, the inner ...According to the characteristic of Team Software Process （TSP）, it adopts a hierarchy-based model combined discrete event model with system dynamics model. This model represents TSP as form of two levels, the inner level embodies the continuity of the software process, the outer embodies the software development process by phases, and the structure and principle of the model is explained in detail, then formalization description of the model is offered. At last, an example is presented to demonstrate the simulation process and result. This model can simulate team software process from various angles, supervise and predict the software process. Also it can make the management of software development become more scientific and improve the quality of software.展开更多
In view of the flaws of component-based software （CBS） reliability modeling and analysis, the low recognition degree of debugging process, too many assumptions and difficulties in obtaining the solution, a CBS relia...In view of the flaws of component-based software （CBS） reliability modeling and analysis, the low recognition degree of debugging process, too many assumptions and difficulties in obtaining the solution, a CBS reliability simulation process is presented incorporating the imperfect debugging and the limitation of debugging resources. Considering the effect of imperfect debugging on fault detec- tion and correction process, a CBS integration testing model is sketched by multi-queue muhichannel and finite server queuing model （MMFSQM）. Compared with the analytical method based on pa- rameters and other nonparametric approaches, the simulation approach can relax more of the usual reliability modeling assumptions and effectively expound integration testing process of CBS. Then, CBS reliability process simulation procedure is developed accordingly. The proposed simulation ap- proach is validated to be sound and effective by simulation experiment studies and analysis.展开更多
A flexible manufacturing system (FMS) is a highly automated, complex system. Simulation is a well-proven method to design or analyze an FMS. Deployment of a radio frequency identification (RFID) system in FMS produces...A flexible manufacturing system (FMS) is a highly automated, complex system. Simulation is a well-proven method to design or analyze an FMS. Deployment of a radio frequency identification (RFID) system in FMS produces large volumes of RFID data streams, which provide valuable information to improve the operation of FMS. Different frameworks are presented in this paper regarding the use of RFID data streams in an FMS simulation. Simulations are performed with AutoMod software. Related technical details are also presented. The paper’s structure is complied as the following steps: step 1, the introduction of AMHS, FMS and AutoMod;step 2, FMS simulation using AutoMod software;step 3, simulation frameworks driven by RFID data streams;step 4, conclusion.展开更多
Streamline simulation is developed to simulate waterflooding in fractured reservoirs. Conventional reservoir simulation methods for fluid flow simulation in large and complex reservoirs are very costly and time consum...Streamline simulation is developed to simulate waterflooding in fractured reservoirs. Conventional reservoir simulation methods for fluid flow simulation in large and complex reservoirs are very costly and time consuming. In streamline method, transport equations are solved on one-dimensional streamlines to reduce the computation time with less memory for simulation. First, pressure equation is solved on an Eulerian grid and streamlines are traced. Defining the "time of flight", saturation equations are mapped and solved on streamlines. Finally, the results are mapped back on Eulerian grid and the process is repeated until the simulation end time. The waterflooding process is considered in a fractured reservoir using the dual porosity model. Afterwards, a computational code is developed to solve the same problem by the IMPES method and the results of streamline simulation are compared to those of the IMPES and a commercial software. Finally, the accuracy and efficiency of streamline simulator for simulation of two-phase flow in fractured reservoirs has been proved.展开更多
China’s first solar mission,the Advanced Space-based Solar Observatory(ASO-S),is now changing from Phase B to Phase C.Its main scientific objectives are summarized as’1M2B’,namely magnetic field and two types of bu...China’s first solar mission,the Advanced Space-based Solar Observatory(ASO-S),is now changing from Phase B to Phase C.Its main scientific objectives are summarized as’1M2B’,namely magnetic field and two types of bursts(solar flares and coronal mass ejections).Among the three scientific payloads,Hard X-ray Imager(HXI)observes images and spectra of X-ray bursts in solar flares.In this paper,we briefly report on the progresses made by the HXI science team(data and software team)during the design phase(till May 2019).These include simulations of HXI imaging,optimization of HXI grids,development of imaging algorithms,estimation of orbital background,as well as in-orbit calibration plan.These efforts provided guidance for the engineering,improved HXI’s imaging capability and reduced the cost of the instrument.展开更多
This study presents three kinds of skid-mounted plants, including single mixed refrigerant cycle （MRC）, nitrogen expander cycle, and natural gas （NG） Claude cycle. Hysys simulation shows that single MRC is the mos...This study presents three kinds of skid-mounted plants, including single mixed refrigerant cycle （MRC）, nitrogen expander cycle, and natural gas （NG） Claude cycle. Hysys simulation shows that single MRC is the most efficient cycle among the three. The specific power of single MRC liquefiers is 1 485 k.l/kg, 15% higher than that of large liquefaction process. Considering the recovery of stranded-gas, commercial analysis suggests that the initial cost of LNG plants ranging from 1 to 100 ms/day can be paid back in 2 to 4 years.展开更多
Crustal stresses play an important role in both exploration and development in the oil and gas industry.However,it is difficult to simulate crustal stress distributions accurately,because of the incompatibilities that...Crustal stresses play an important role in both exploration and development in the oil and gas industry.However,it is difficult to simulate crustal stress distributions accurately,because of the incompatibilities that exist among different software.Here,a series of algorithms is developed and integrated in the Petrel2ANSYS to carry out two-way conversions between the 3D attribute models that employ corner-point grids used in Petrel and the 3D finite-element grids used in ANSYS.Furthermore,a modified method of simulating stress characteristics and analyzing stress fields using the finite-element method and multiple finely resolved 3D models is proposed.Compared to the traditional finite-element simulation-based approach,which involves describing the heterogeneous within a rock body or sedimentary facies in detail and simulating the stress distribution,the single grid cell-based approach focuses on a greater degree on combining the rock mechanics described by 3D corner-point grid models with the finely resolved material characteristics of 3D finite-element models.Different models that use structured and unstructured grids are verified in Petrel2ANSYS to assess the feasibility.In addition,with minor modifications,platforms based on the present algorithms can be extended to other models to convert corner-point grids to the finite-element grids constructed by other software.展开更多
Due to global completion in the automotive industry, productivity improvement is vital in these industries. In automotive assembly lines, productivity loses are attributed to bottlenecks, long processing time in works...Due to global completion in the automotive industry, productivity improvement is vital in these industries. In automotive assembly lines, productivity loses are attributed to bottlenecks, long processing time in workstations and underutilization of resources. The purpose of this research is to evaluate the performance of the production system, analyze the bottlenecks in different parts of the workstation, their capacity and constraints. Also, develop different scenarios for improvement. To achieve this objective, a simulation model was developed using Arena Software to analyze bottlenecks in each workstation. The analysis was based on the queue in the system to identify the longest queue in workstations. After analysis of the assembly line, the result showed that the longest waiting time observed is cab preparation and drop, bumper, engine subassembly fitment of soundproof with respective numbers 14.4, 13.97, 13.00, 13.70 minutes, with respective average number waiting of 24.87%, 17.57%, 25.91% and 23.39%. Using different scenarios for the improvement of the production line showed that the waiting time observed in-cab preparation and drop, bumper, engine subassembly, fitment of soundproof has greatly reduced for the two workstations added and three operators respectively from 14.4 to 3.97 and 3.1, from 13.97 to 3.77 and 2.48, from 13.00 to 4.21 and 3.83, from 13.70 to 0.00 and 2.37 minutes, with respective average number waiting from 24.87% to 5% and 2%, from 17.57% to 5% and 0.9%, from 25.91% to 5% and 4%, and from 23.39% to 0.00% and 3%. To conclude the research study was able to demonstrate the modelling approach using simulation for analysis of a production line assembly. The contribution of this research was so enormous, this study has improved the output production up to 144%.展开更多
Based on a method using numerical simulation equations and their solution schemes for liquid metal flows andheat transfer during mold filling and the solidification process of casting, 3-D numerical simulation softwar...Based on a method using numerical simulation equations and their solution schemes for liquid metal flows andheat transfer during mold filling and the solidification process of casting, 3-D numerical simulation software SRIFCAST wascreated. This includes enmeshment of casting; velocity and temperature fields calculation; displaying iso-temperature lines;velocity vectors and 3-D temperature fields on a Windows 9x operating system. SRIFCAST was applied to produce soundcastings of automobile and diesel engines, and also to connect with microstructure simulation for ductile iron castings.展开更多
This study utilizes ANSYS to establish FEM's model of metamorphic core complex,and used thermal-structure analysis to simulate metamorphic core complex's temperature field and stress field.The metamorphic core...This study utilizes ANSYS to establish FEM's model of metamorphic core complex,and used thermal-structure analysis to simulate metamorphic core complex's temperature field and stress field.The metamorphic core complex formation mechanism is discussed.The simulation results show that the temperature field change appearing as the earth surface's temperature is the lowest,and the temperature of metamorphic core complex's nucleus is the highest.The temperature field is higher along with depth increase,and the stress field change appearing as the biggest stress occurs in the nucleus.The next stress field occurs at the top of the cover.展开更多
In this paper, a new concept of simulation operating system (SIMOS) is described. A detailed definition of SIMOS is given, and two integrated simulation software (IPSOS and IMSS) are introduced based on SIMOS.
A hardware-software co-simulation method for system on chip (SOC) design is discussed. It is based on an instruction set simulator (ISS) and an event-driven hardware simulator, and a bus interface model that is descri...A hardware-software co-simulation method for system on chip (SOC) design is discussed. It is based on an instruction set simulator (ISS) and an event-driven hardware simulator, and a bus interface model that is described in C language provides the interface between the two. The bus interface model and the ISS are linked into a singleton program--the software simulator, which communicate with the hardware simulator through Windows sockets. The implementation of the bus interface model and the synchronization between hardware and software simulator are discussed in detail. Co-simulation control of the hardware simulator is also discussed.展开更多
This study presents a decision making process in three steps of knowledge management for test organization using process simulation and financial analysis. First, project cost assessment of test knowledge management p...This study presents a decision making process in three steps of knowledge management for test organization using process simulation and financial analysis. First, project cost assessment of test knowledge management process subjects to different project duration and number of staffs. Two knowledge management simulation models representing experienced personnel with knowledge sharing and inexperienced personnel with internal training respectively are employed to contrast test personnel capability. Second, performance evaluation of software testing process by different personnel capability is conducted to simulate system test using three project metrics, namely, duration, effort cost, and quality. Third, a comparative financial analysis is prepared to determine the best solution by return on investment, payback period, and benefit cost ratio. The results from three stages of finding are discussed to arrive at the final scenario. We provide a case study evaluating how software testing industry needs to build effective test organization with high quality personnel for sustainable development and improvement.展开更多
Modelling and simulation has become an important tool in research and development. Simulation models are used to develop better understanding of the internal properties and impact of various parameters on the final qu...Modelling and simulation has become an important tool in research and development. Simulation models are used to develop better understanding of the internal properties and impact of various parameters on the final quality of the product or process. Simulation model reduces the number of experiments and saves the wastage of material, time and money and are widely used in automobile industry, aircrafts manufacturing, process engineering, training for military, health care sector and many more. Wood Plastic Composite （WPC） is a bio-composite made by mixing wood fibers and plastic granules together at high temperature by compression molding or injection molding. A large quantity of WPC is rejected due to poor quality and low mechanical strength. There is a need to improve the understanding of the wood plastic composites, with both theoretical and experimental analysis. The impact of various parameters and processing conditions on the final product is not known to the industry people, due to less simulation models in this field. A new simulation software WPC Soft is developed to predict the mechanical and thermal properties of WPC. The software can predict the mechanical and thermal properties of WPC. The simulation results were validated with the experimental results and it was observed that the predicted values are quite close to the experimental values and with the further refining of the model, prediction can be further improved. The present simulation software can be easily used by the industry people and it requires very little knowledge of computers or modeling for its operation.展开更多
The approach of control software development based on simulation is discussed. A library of object classes for a flexible manufacturing system(FMS) simulation has been developed using the technology of object-oriented...The approach of control software development based on simulation is discussed. A library of object classes for a flexible manufacturing system(FMS) simulation has been developed using the technology of object-oriented programming. Using the library, the simulation software of a FMS which has the same manufacturing logic with the FMS control system can be easily constructed. A new approach in the development of FMS control software based on software reuse and an emulator of the blade FMS control system for testing control software have also been developed.展开更多
基金MWorks University Application Verification Project(BX2024C081)。
文摘This article focuses on the teaching of circuit foundation courses in vocational colleges and explores in depth the application of MWorks simulation software.By analyzing the limitations of traditional circuit foundation course teaching,this article elaborates on the advantages of MWorks software in teaching,including intuitive presentation of circuit principles,provision of rich component libraries,and powerful analysis functions.Detailed teaching practice cases based on the software were introduced,such as simple circuit construction and analysis,complex circuit fault troubleshooting,etc.,and the application effect was demonstrated by comparing actual teaching data.The results show that MWorks simulation software effectively enhances students’learning interest,practical ability,and theoretical knowledge mastery,providing strong support for the improvement of the teaching quality of circuit foundation courses in vocational colleges.
基金MWORKS University Application Verification Project(BX2024C081).
文摘This article aims to explore the teaching mode of using MWorks simulation software to promote teaching in circuit fundamentals courses in vocational colleges through competitions.By analyzing the limitations of traditional teaching,this article elaborates on the functional advantages of MWorks software and its specific application methods in promoting teaching through competitions,including how to combine skill competitions for teaching design,organizing internal selection and training,and other aspects.Practice has shown that this model effectively enhances students’professional skills,innovation ability,and teamwork spirit,while also promoting the improvement of teachers’teaching level.Finally,the problems encountered during the application process were reflected upon,and improvement suggestions were proposed,providing a reference for relevant teaching reforms in vocational colleges.
文摘The track model used in the dynamic analysis and design system software is investigated. A home made tank is taken as an example to illustrate the method for modeling an integral tracked vehicle and perform the dynamic simulation. The obtained results have demonstrated that the simulation method has the advantage of high efficiency, more convenience and more insight into the dynamical behavior of the system.
文摘Modeling technology has been introduced into software testing field. However, how to carry through the testing modeling effectively is still a difficulty. Based on combination of simulation modeling technology and embedded real-time software testing method, the process of simulation testing modeling is studied first. And then, the supporting environment of simulation testing modeling is put forward. Furthermore, an approach of embedded real-time software simulation testing modeling including modeling of cross-linked equipments of system under testing （SUT）, test case, testing scheduling, and testing system service is brought forward. Finally, the formalized description and execution system of testing models are given, with which we can realize real-time, closed loop, mad automated system testing for embedded real-time software.
文摘A computer software to simulate the phase transformation during quenching is designed based on Avrami equation and Scheil additivity principle of incubation period. The isothermal transformation diagrams of supercooled austenite are described by cubic spline functions. This software is possess of a good graphic interface of Windows style, can simulate the whole process in austenite decomposition during continuous cooling. If the cooling rate was given, the fraction of various microstructures transformed of austenite decomposition during continuous cooling at any temperature can be calculated. The simulation results are checked with the quenching experiment of 45 steel. The results indicate that the simulation results are comparatively close to the experimental results.
基金Supported by the National Defense Basic ResearchFoundation (K1503063165)
文摘According to the characteristic of Team Software Process （TSP）, it adopts a hierarchy-based model combined discrete event model with system dynamics model. This model represents TSP as form of two levels, the inner level embodies the continuity of the software process, the outer embodies the software development process by phases, and the structure and principle of the model is explained in detail, then formalization description of the model is offered. At last, an example is presented to demonstrate the simulation process and result. This model can simulate team software process from various angles, supervise and predict the software process. Also it can make the management of software development become more scientific and improve the quality of software.
基金Supported by the National High Technology Research and Development Program of China(No.2008AA01A201)the National Nature Science Foundation of China(No.60503015,90818016)
文摘In view of the flaws of component-based software （CBS） reliability modeling and analysis, the low recognition degree of debugging process, too many assumptions and difficulties in obtaining the solution, a CBS reliability simulation process is presented incorporating the imperfect debugging and the limitation of debugging resources. Considering the effect of imperfect debugging on fault detec- tion and correction process, a CBS integration testing model is sketched by multi-queue muhichannel and finite server queuing model （MMFSQM）. Compared with the analytical method based on pa- rameters and other nonparametric approaches, the simulation approach can relax more of the usual reliability modeling assumptions and effectively expound integration testing process of CBS. Then, CBS reliability process simulation procedure is developed accordingly. The proposed simulation ap- proach is validated to be sound and effective by simulation experiment studies and analysis.
文摘A flexible manufacturing system (FMS) is a highly automated, complex system. Simulation is a well-proven method to design or analyze an FMS. Deployment of a radio frequency identification (RFID) system in FMS produces large volumes of RFID data streams, which provide valuable information to improve the operation of FMS. Different frameworks are presented in this paper regarding the use of RFID data streams in an FMS simulation. Simulations are performed with AutoMod software. Related technical details are also presented. The paper’s structure is complied as the following steps: step 1, the introduction of AMHS, FMS and AutoMod;step 2, FMS simulation using AutoMod software;step 3, simulation frameworks driven by RFID data streams;step 4, conclusion.
文摘Streamline simulation is developed to simulate waterflooding in fractured reservoirs. Conventional reservoir simulation methods for fluid flow simulation in large and complex reservoirs are very costly and time consuming. In streamline method, transport equations are solved on one-dimensional streamlines to reduce the computation time with less memory for simulation. First, pressure equation is solved on an Eulerian grid and streamlines are traced. Defining the "time of flight", saturation equations are mapped and solved on streamlines. Finally, the results are mapped back on Eulerian grid and the process is repeated until the simulation end time. The waterflooding process is considered in a fractured reservoir using the dual porosity model. Afterwards, a computational code is developed to solve the same problem by the IMPES method and the results of streamline simulation are compared to those of the IMPES and a commercial software. Finally, the accuracy and efficiency of streamline simulator for simulation of two-phase flow in fractured reservoirs has been proved.
基金supported by the Strategic Priority Research Program on Space Science, Chinese Academy of Sciences (Grant Nos. XDA15320104, XDA15052200 and XDA15320300)the National Natural Science Foundation of China (Grant Nos. 11427803, 11820101002, U1731241 and U1631242)+1 种基金the ‘Thousand Young Talents Plan’the Jiangsu Innovative and Entrepreneurial Talents Program
文摘China’s first solar mission,the Advanced Space-based Solar Observatory(ASO-S),is now changing from Phase B to Phase C.Its main scientific objectives are summarized as’1M2B’,namely magnetic field and two types of bursts(solar flares and coronal mass ejections).Among the three scientific payloads,Hard X-ray Imager(HXI)observes images and spectra of X-ray bursts in solar flares.In this paper,we briefly report on the progresses made by the HXI science team(data and software team)during the design phase(till May 2019).These include simulations of HXI imaging,optimization of HXI grids,development of imaging algorithms,estimation of orbital background,as well as in-orbit calibration plan.These efforts provided guidance for the engineering,improved HXI’s imaging capability and reduced the cost of the instrument.
文摘This study presents three kinds of skid-mounted plants, including single mixed refrigerant cycle （MRC）, nitrogen expander cycle, and natural gas （NG） Claude cycle. Hysys simulation shows that single MRC is the most efficient cycle among the three. The specific power of single MRC liquefiers is 1 485 k.l/kg, 15% higher than that of large liquefaction process. Considering the recovery of stranded-gas, commercial analysis suggests that the initial cost of LNG plants ranging from 1 to 100 ms/day can be paid back in 2 to 4 years.
基金Project(2017ZX05013002-002)supported by Major National Science and Technology Projects of ChinaProject(RIPED-2016-JS-276)supported by Petro-China Research Institute of Petroleum Exploration and Development
文摘Crustal stresses play an important role in both exploration and development in the oil and gas industry.However,it is difficult to simulate crustal stress distributions accurately,because of the incompatibilities that exist among different software.Here,a series of algorithms is developed and integrated in the Petrel2ANSYS to carry out two-way conversions between the 3D attribute models that employ corner-point grids used in Petrel and the 3D finite-element grids used in ANSYS.Furthermore,a modified method of simulating stress characteristics and analyzing stress fields using the finite-element method and multiple finely resolved 3D models is proposed.Compared to the traditional finite-element simulation-based approach,which involves describing the heterogeneous within a rock body or sedimentary facies in detail and simulating the stress distribution,the single grid cell-based approach focuses on a greater degree on combining the rock mechanics described by 3D corner-point grid models with the finely resolved material characteristics of 3D finite-element models.Different models that use structured and unstructured grids are verified in Petrel2ANSYS to assess the feasibility.In addition,with minor modifications,platforms based on the present algorithms can be extended to other models to convert corner-point grids to the finite-element grids constructed by other software.
文摘Due to global completion in the automotive industry, productivity improvement is vital in these industries. In automotive assembly lines, productivity loses are attributed to bottlenecks, long processing time in workstations and underutilization of resources. The purpose of this research is to evaluate the performance of the production system, analyze the bottlenecks in different parts of the workstation, their capacity and constraints. Also, develop different scenarios for improvement. To achieve this objective, a simulation model was developed using Arena Software to analyze bottlenecks in each workstation. The analysis was based on the queue in the system to identify the longest queue in workstations. After analysis of the assembly line, the result showed that the longest waiting time observed is cab preparation and drop, bumper, engine subassembly fitment of soundproof with respective numbers 14.4, 13.97, 13.00, 13.70 minutes, with respective average number waiting of 24.87%, 17.57%, 25.91% and 23.39%. Using different scenarios for the improvement of the production line showed that the waiting time observed in-cab preparation and drop, bumper, engine subassembly, fitment of soundproof has greatly reduced for the two workstations added and three operators respectively from 14.4 to 3.97 and 3.1, from 13.97 to 3.77 and 2.48, from 13.00 to 4.21 and 3.83, from 13.70 to 0.00 and 2.37 minutes, with respective average number waiting from 24.87% to 5% and 2%, from 17.57% to 5% and 0.9%, from 25.91% to 5% and 4%, and from 23.39% to 0.00% and 3%. To conclude the research study was able to demonstrate the modelling approach using simulation for analysis of a production line assembly. The contribution of this research was so enormous, this study has improved the output production up to 144%.
基金The reseach is supported by the TG 2000067208 project
文摘Based on a method using numerical simulation equations and their solution schemes for liquid metal flows andheat transfer during mold filling and the solidification process of casting, 3-D numerical simulation software SRIFCAST wascreated. This includes enmeshment of casting; velocity and temperature fields calculation; displaying iso-temperature lines;velocity vectors and 3-D temperature fields on a Windows 9x operating system. SRIFCAST was applied to produce soundcastings of automobile and diesel engines, and also to connect with microstructure simulation for ductile iron castings.
文摘This study utilizes ANSYS to establish FEM's model of metamorphic core complex,and used thermal-structure analysis to simulate metamorphic core complex's temperature field and stress field.The metamorphic core complex formation mechanism is discussed.The simulation results show that the temperature field change appearing as the earth surface's temperature is the lowest,and the temperature of metamorphic core complex's nucleus is the highest.The temperature field is higher along with depth increase,and the stress field change appearing as the biggest stress occurs in the nucleus.The next stress field occurs at the top of the cover.
文摘In this paper, a new concept of simulation operating system (SIMOS) is described. A detailed definition of SIMOS is given, and two integrated simulation software (IPSOS and IMSS) are introduced based on SIMOS.
文摘A hardware-software co-simulation method for system on chip (SOC) design is discussed. It is based on an instruction set simulator (ISS) and an event-driven hardware simulator, and a bus interface model that is described in C language provides the interface between the two. The bus interface model and the ISS are linked into a singleton program--the software simulator, which communicate with the hardware simulator through Windows sockets. The implementation of the bus interface model and the synchronization between hardware and software simulator are discussed in detail. Co-simulation control of the hardware simulator is also discussed.
文摘This study presents a decision making process in three steps of knowledge management for test organization using process simulation and financial analysis. First, project cost assessment of test knowledge management process subjects to different project duration and number of staffs. Two knowledge management simulation models representing experienced personnel with knowledge sharing and inexperienced personnel with internal training respectively are employed to contrast test personnel capability. Second, performance evaluation of software testing process by different personnel capability is conducted to simulate system test using three project metrics, namely, duration, effort cost, and quality. Third, a comparative financial analysis is prepared to determine the best solution by return on investment, payback period, and benefit cost ratio. The results from three stages of finding are discussed to arrive at the final scenario. We provide a case study evaluating how software testing industry needs to build effective test organization with high quality personnel for sustainable development and improvement.
文摘Modelling and simulation has become an important tool in research and development. Simulation models are used to develop better understanding of the internal properties and impact of various parameters on the final quality of the product or process. Simulation model reduces the number of experiments and saves the wastage of material, time and money and are widely used in automobile industry, aircrafts manufacturing, process engineering, training for military, health care sector and many more. Wood Plastic Composite （WPC） is a bio-composite made by mixing wood fibers and plastic granules together at high temperature by compression molding or injection molding. A large quantity of WPC is rejected due to poor quality and low mechanical strength. There is a need to improve the understanding of the wood plastic composites, with both theoretical and experimental analysis. The impact of various parameters and processing conditions on the final product is not known to the industry people, due to less simulation models in this field. A new simulation software WPC Soft is developed to predict the mechanical and thermal properties of WPC. The software can predict the mechanical and thermal properties of WPC. The simulation results were validated with the experimental results and it was observed that the predicted values are quite close to the experimental values and with the further refining of the model, prediction can be further improved. The present simulation software can be easily used by the industry people and it requires very little knowledge of computers or modeling for its operation.
基金the High Technology Research and Development Programme of China
文摘The approach of control software development based on simulation is discussed. A library of object classes for a flexible manufacturing system(FMS) simulation has been developed using the technology of object-oriented programming. Using the library, the simulation software of a FMS which has the same manufacturing logic with the FMS control system can be easily constructed. A new approach in the development of FMS control software based on software reuse and an emulator of the blade FMS control system for testing control software have also been developed.
