The initial shape of the secondary arc considerably influences its subsequent shape.To establish the model for the arcing time of the secondary arc and modify the single-phase reclosing sequence,theoretical and experi...The initial shape of the secondary arc considerably influences its subsequent shape.To establish the model for the arcing time of the secondary arc and modify the single-phase reclosing sequence,theoretical and experimental analysis of the evolution process of the short-circuit arc to the secondary arc is critical.In this study,an improved charge simulation method was used to develop the internal-space electric-field model of the short-circuit arc.The intensity of the electric field was used as an independent variable to describe the initial shape of the secondary arc.A secondary arc evolution model was developed based on this model.Moreover,the accuracy of the model was evaluated by comparison with physical experimental results.When the secondary arc current increased,the arcing time and dispersion increased.There is an overall trend of increasing arc length with increasing arcing time.Nevertheless,there is a reduction in arc length during arc ignition due to short circuits between the arc columns.Furthermore,the arcing time decreased in the range of 0°-90°as the angle between the wind direction and the x-axis increased.This work investigated the method by which short-circuit arcs evolve into secondary arcs.The results can be used to develop the secondary arc evolution model and to provide both a technical and theoretical basis for secondary arc suppression.展开更多
It is difficult to temporally and spatially track and characterize the slurry viscosity in flowing water during grouting simulation.In this study,a sequential flow and solidification(SFS)method considering the spatial...It is difficult to temporally and spatially track and characterize the slurry viscosity in flowing water during grouting simulation.In this study,a sequential flow and solidification(SFS)method considering the spatial-temporal evolution of slurry viscosity in flowing water in karst conduit is proposed.First,a time-dependent model for the threshold function of slurry viscosity is established.During the grouting process,the spatial-temporal evolution of slurry viscosity is revealed by tracking the diffusion behavior of the slurry injected at different times.This method is capable of describing the gradual solidification process of the slurry during grouting.Furthermore,a physical model of grouting in a karst conduit is developed.Second,the effectiveness of the SFS method in grouting simulation is verified by the experiment of grouting conduit in flowing water.The SFS method enables real-time monitoring of fluid velocity and pressure during grouting in flowing water and provides a feasible calculation method for revealing the grouting plugging mechanism in complex karst conduits at different engineering scales.In addition,it can be used to guide the design of grouting tests in flowing water,improve cost efficiency,and provide theoretical basis for optimizing grouting design and slurry selection.展开更多
The particle simulation method is used to study the effects of loading waveforms （i.e. square, sinusoidal and triangle waveforms） on rock damage at mesoscopic scale. Then some influencing factors on rock damage at t...The particle simulation method is used to study the effects of loading waveforms （i.e. square, sinusoidal and triangle waveforms） on rock damage at mesoscopic scale. Then some influencing factors on rock damage at the mesoscopic scale, such as loading frequency, stress amplitude, mean stress, confining pressure and loading sequence, are also investigated with sinusoidal waveform in detail. The related numerical results have demonstrated that： 1） the loading waveform has a certain effect on rock failure processes. The square waveform has the most damage within these waveforms, while the triangle waveform has less damage than sinusoidal waveform. In each cycle, the number of microscopic cracks increases in the loading stage, while it keeps nearly constant in the unloading stage. 2） The loading frequency, stress amplitude, mean stress, confining pressure and loading sequence have considerable effects on rock damage subjected to cyclic loading. The higher the loading frequency, stress amplitude and mean stress, the greater the damage the rock accumulated; in contrast, the lower the confining pressure, the greater the damage the rock has accumulated. 3） There is a threshold value of mean stress and stress amplitude, below which no further damage accumulated after the first few cycle loadings. 4） The high-to-low loading sequence has more damage than the low-to-high loading sequence, suggesting that the rock damage is loading-path dependent.展开更多
The control rod drive mechanism(CRDM)is an essential part of the control and safety protection system of pressurized water reactors.Current CRDM simulations are mostly performed collectively using a single method,igno...The control rod drive mechanism(CRDM)is an essential part of the control and safety protection system of pressurized water reactors.Current CRDM simulations are mostly performed collectively using a single method,ignoring the influence of multiple motion units and the differences in various features among them,which strongly affect the efficiency and accuracy of the simulations.In this study,we constructed a flow field fusion simulation method based on model features by combining key motion unit analysis and various simulation methods and then applied the method to the CRDM simulation process.CRDM performs motion unit decomposition through the structural hierarchy of function-movement-action method,and the key meta-actions are identified as the nodes in the flow field simulation.We established a fused feature-based multimethod simulation process and processed the simulation methods and data according to the features of the fluid domain space and the structural complexity to obtain the fusion simulation results.Compared to traditional simulation methods and real measurements,the simulation method provides advantages in terms of simulation efficiency and accuracy.展开更多
A passive simulation method based on the six degrees of freedom(6-DOF)model and dynamic mesh is proposed according to the working principle to study the dynamic characteristics of the turbine flow sensors.This simulat...A passive simulation method based on the six degrees of freedom(6-DOF)model and dynamic mesh is proposed according to the working principle to study the dynamic characteristics of the turbine flow sensors.This simulation method controls the six degrees of freedom of the impeller using the user-defined functions(UDF)program so that it can only rotate under the impact of fluid.The impeller speed can be calculated in real-time,and the inlet speed can be set with time to obtain the dynamic performance of the turbine flow sensors.Based on this simulation method,three turbine flow sensors with different diameters were simulated,and the reliability of the simulation method was verified by both steady-state and unsteady-state experiments.The results show that the trend of meter factor with flow rate acquired from the simulation is close to the experimental results.The deviation between the simulation and experiment results is low,with a maximum deviation of 2.88%.In the unsteady simulation study,the impeller speed changed with the inlet velocity of the turbine flow sensor,showing good tracking performance.The passive simulation method can be used to predict the dynamic performance of the turbine flow sensor.展开更多
Accurate thermal simulation is the key in the simulation approach to defining the unique microstructure and properties of the HAZ regions. Simulation enables an expansion of the volume of material char- acteristic...Accurate thermal simulation is the key in the simulation approach to defining the unique microstructure and properties of the HAZ regions. Simulation enables an expansion of the volume of material char- acteristic of each H4Z region to a sufficient size for property determination.The combined influence of heat input,preheat temperature, plate thickness, and widing process on HAZ microstructure and properties relics on the accurate simulation of thermal cycles corresponding to different peak temperatures using an HAZ simulator like the Gleeble.Several computer programs have been developed to predict thermal excursions in various HAZ regions during welding. Some were developed based simply on the thermal propertics of a material;whereas, others were generated on the basis of actual experimental data.A suitable HAZ thermal simulation program must be ons that can authntically duplicate an ac- tual thermal cycle experienced during welding within reasonable limies. Therefore, the similarities and differences among the HAZ thermal cycles predicted by various methodologies should be fully under- stood. A total of sts thermal cycle prediction methodologies were compared in this evaluation. It was de- termined that some HAZ simulation programs have sever limitations due to the idealized assumptions considered in their development.According to the experieare at The University of Tennessee and the comparison results in this study, the HAZ thermal simulation programs; ' HAZ Calculator' and F(s, d); are recommended for accurate HAZ thermal cycle duplication.展开更多
Computational Fluid Dynamics(CFD)simulation is one of the important methods to study the performance and influencing factors of turbine flow sensors.According to the working characteristics of the turbine flow sensor,...Computational Fluid Dynamics(CFD)simulation is one of the important methods to study the performance and influencing factors of turbine flow sensors.According to the working characteristics of the turbine flow sensor,the passive simulation method based on the six degrees of freedom(6-DOF)model and dynamic mesh is proposed in this paper.The reliability of the simulation method is verified by steady-state experiments and unsteady-state experiments.The results show that the trend of meter factor with flow rate acquired from the simulation is close to the experimental results,and the deviation between the simulation result and the experiment result is low with a maximum deviation of 2.88%.In the unsteady simulation study,the impeller speed changes with the inlet velocity of the turbine flow sensor,which has a good follow-up.The passive simulation method can be used to predict the dynamic performance of the turbine flow sensor.展开更多
In the analysis of power electronics system,it is necessary to simulate ordinary differential equations(ODEs)with discontinuities and stiffness.However,there are many difficulties in using traditional discrete-time al...In the analysis of power electronics system,it is necessary to simulate ordinary differential equations(ODEs)with discontinuities and stiffness.However,there are many difficulties in using traditional discrete-time algorithms to solve such equations.Kofman and others presented the quantized state systems(QSS)algorithm in the discrete event system specification(DEVS)formalism.The discretization is applied to the state variables instead of time range in QSS.QSS is efficient to solve ODEs,but it is difficulty to be used when simulating actual power electronics systems with controller’s and other events.Based on the idea of this numerical algorithm and discrete event,a Discrete State Event Driven(DSED)simulation method is presented in this paper,which is fit for simulation of power electronics system.The method is developed to deal with non-linearity,stiffness and multi-time scale of power electronics systems.The DSED simulation method includes event definition,module seperation and modeling,event-driven mechanisms,numerical computation based on QSS,and some other operations.Simulation results verified the effectiveness and validity of the proposed method.展开更多
This study aims to develop a chloride diffusion simulation method that considers the hydration microstructure and pore solution properties during the hydration of tricalcium silicate(C3S).The method combines the hydra...This study aims to develop a chloride diffusion simulation method that considers the hydration microstructure and pore solution properties during the hydration of tricalcium silicate(C3S).The method combines the hydration simulation,thermodynamic calculation,and finite element analysis to examine the effects of pore solution,including effect of electrochemical potential,effect of chemical activity,and effect of mechanical interactions between ions,on the chloride effective diffusion coefficient of hydrated C3S paste.The results indicate that the effect of electrochemical potential on chloride diffusion becomes stronger with increasing hydration age due to the increase in the content of hydrated calcium silicate;as the hydration age increases,the effect of chemical activity on chloride diffusion weakens when the number of diffusible elements decreases;the effect of mechanical interactions between ions on chloride diffusion decreases with the increase of hydration age.展开更多
Without knowing the emittance value, it is difficult to optimize ion beam optics for minimum beam loss during transmission, especially considering the very high emittance values of electron cyclotron resonance(ECR) io...Without knowing the emittance value, it is difficult to optimize ion beam optics for minimum beam loss during transmission, especially considering the very high emittance values of electron cyclotron resonance(ECR) ion sources.With this in mind, to measure the emittance of the ion beams produced by the mVINIS ECR, which is part of the FAMA facility at the Vin?a Institute of Nuclear Sciences, we have developed a pepper-pot scintillator screen system combined with a CMOS camera. The application, developed on the Lab VIEW platform, allows us to control the camera's main attribute settings, such as the shutter speed and the gain, record the images in the region of interest, and process and filter the images in real time. To analyze the data from the obtained image, we have developed an algorithm called measurement and analysis of ion beam luminosity(MAIBL) to reconstruct the four-dimensional(4D) beam profile and calculate the root mean square(RMS) emittance. Before measuring emittance, we performed a simulated experiment using the pepper-pot simulation(PPS) program. An exported file(PPS) gives a numerically generated raw image(mock image) of a beam with a predefined emittance value after it has passed through a pepper-pot mask. By analyzing data from mock images instead of the image obtained by the camera and putting it into the MAIBL algorithm, we can compare the calculated emittance with PPS's initial emittance value. In this paper, we present our computational tools and explain the method for verifying the correctness of the calculated emittance values.展开更多
Ultrasound simulation for carotid arteries is helpful to the performance assessments of vessel wall detection and signal processing methods by using ultrasound techniques. An ul- trasound simulation method of carotid ...Ultrasound simulation for carotid arteries is helpful to the performance assessments of vessel wall detection and signal processing methods by using ultrasound techniques. An ul- trasound simulation method of carotid artery wall with a three-membrane structure is proposed in present study. According to the ultrasound speckle distributions varying with the shapes and densities of scatterer distributions, as well as the statistic results of the clinical images, the parameters of distributions, densities and intensities of scatterers for different kinds of tissues in the carotid artery phantoms are determined. Each region is acoustically characterized using FIELD II software to produce the radio frequency echo signals, from which ultrasound images are derived. The results based on 30 simulations show that the echo distributions of the intimae, mediae, adventitias and blood are consistent with the clinical ones. Moreover, compared with the results from the central frequency of 8 MHz, the mean measurements for thicknesses of the intima, media and adventitia membranes, as well as the lumen diameter from the simulation images based on 12 MHz are the same as the preset ones, and the maximum relative errors are the 4.01%, 1.25%, 0.04% and 0.15%, respectively. The simulation under this condition is more realistic.展开更多
A simplified simulation method based on the FDTD technique that can handle active devices is proposed. This method well suits the electrical crosstalk analysis of multi-channel integrated, opto-electronic mixed module...A simplified simulation method based on the FDTD technique that can handle active devices is proposed. This method well suits the electrical crosstalk analysis of multi-channel integrated, opto-electronic mixed modules. We apply this method to an 8-channel integrated super-compact high-sensitivity optical module. The results show good agreement between simulations and measurements.展开更多
To design the optimum acceleration control schedule for the Adaptive Cycle Engine(ACE)in the full flight envelope,this paper establishes a direct simulation model of the ACE transient state.In this model,geometric par...To design the optimum acceleration control schedule for the Adaptive Cycle Engine(ACE)in the full flight envelope,this paper establishes a direct simulation model of the ACE transient state.In this model,geometric parameters are used to replace the component state parameters.The corresponding relationship between geometric parameters and component state parameters is determined by sensitivity analysis.The geometric variables are controlled when the geometric adjustment speed exceeds the limit,and at the same time the corresponding component state parameters are iterated.The gradient optimization algorism is used to optimize the ground acceleration process of ACE,and the control schedule in terms of operating point of compression components and corrected acceleration rate is used as the full-envelope acceleration control schedule based on the similarity principle.The acceleration control schedules of the triple-bypass mode and the double-bypass mode are designed in this paper.The acceleration processes under various flight conditions are simulated using the acceleration control schedules.Compared with the acceleration process with the linear geometric adjustment schedule,the acceleration performance of ACE is improved by the acceleration control schedule,with the impulse of the acceleration process of the triple-bypass mode being increased by 8.7%-12.3% and the impulse of the double-bypass mode acceleration process being increased by 11.8%-14.1%.展开更多
An element-free Galerkin method(EFGM) is used to solve the two-dimensional(2D) ground penetrating radar(GPR)modelling problems, due to its simple pre-processing, the absence of elements and high accuracy. Different fr...An element-free Galerkin method(EFGM) is used to solve the two-dimensional(2D) ground penetrating radar(GPR)modelling problems, due to its simple pre-processing, the absence of elements and high accuracy. Different from element-based numerical methods, this approach makes nodes free from the elemental restraint and avoids the explicit mesh discretization. First, we derived the boundary value problem for the 2D GPR simulation problems. Second, a penalty function approach and a boundary condition truncated method were used to enforce the essential and the absorbing boundary conditions, respectively. A three-layered GPR model was used to verify our element-free approach. The numerical solutions show that our solutions have an excellent agreement with solutions of a finite element method(FEM). Then, we used the EFGM to simulate one more complex model to show its capability and limitations. Simulation results show that one obvious advantage of EFGM is the absence of element mesh, which makes the method very flexible. Due to the use of MLS fitting, a key feature of EFM, is that both the dependent variable and its gradient are continuous and have high precision.展开更多
Hydraulic fracturing （HF） technique has been extensively used for the exploitation of unconventional oiland gas reservoirs. HF enhances the connectivity of less permeable oil and gas-bearing rock formationsby fluid ...Hydraulic fracturing （HF） technique has been extensively used for the exploitation of unconventional oiland gas reservoirs. HF enhances the connectivity of less permeable oil and gas-bearing rock formationsby fluid injection, which creates an interconnected fracture network and increases the hydrocarbonproduction. Meanwhile, microseismic （MS） monitoring is one of the most effective approaches to evaluatesuch stimulation process. In this paper, the combined finite-discrete element method （FDEM） isadopted to numerically simulate HF and associated MS. Several post-processing tools, includingfrequency-magnitude distribution （b-value）, fractal dimension （D-value）, and seismic events clustering,are utilized to interpret numerical results. A non-parametric clustering algorithm designed specificallyfor FDEM is used to reduce the mesh dependency and extract more realistic seismic information.Simulation results indicated that at the local scale, the HF process tends to propagate following the rockmass discontinuities; while at the reservoir scale, it tends to develop in the direction parallel to themaximum in-situ stress. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.展开更多
This paper describes a way of solving the reservoir simulation pressure equation using mulligrid technique. The subroutine MG of four-grid method is presented. The result for 2-D two-phase problem is exactly the same ...This paper describes a way of solving the reservoir simulation pressure equation using mulligrid technique. The subroutine MG of four-grid method is presented. The result for 2-D two-phase problem is exactly the same as that of the SOR method and the CPU time is much less than that of the latter one.展开更多
Objective: to observe the effectiveness of scene simulation teaching method in surgical nursing practice. Methods: in September of 1950s, the residents of our hospital were randomly divided into two groups. The contro...Objective: to observe the effectiveness of scene simulation teaching method in surgical nursing practice. Methods: in September of 1950s, the residents of our hospital were randomly divided into two groups. The control group (n30) used traditional teaching method, while the research group (n30) used simulated situational teaching method. Results: the theoretical score of the research group was (87.58-5.78) and that of the control group was (73.12-4.86). The scores of professional skills and comprehensive accomplishment of the research group were higher than those of the control group, with statistical significance (p 0.05). The satisfaction of the study group and the control group was 96.7% and 73.3% respectively, with significant difference between the two groups (p 0.05). Conclusion: scene simulation teaching method in surgical nursing practice can effectively improve students assessment results, help students to master the corresponding nursing skills, and has the value of popularization and application.展开更多
The variation principle is discussed and Rayleigh-Ritz method is proposed for construction of veloci ty field. A kinematically admissible velocity field based on polynomials was appIied to the determina tion of forgin...The variation principle is discussed and Rayleigh-Ritz method is proposed for construction of veloci ty field. A kinematically admissible velocity field based on polynomials was appIied to the determina tion of forging load and deformed buIge profile during upset forging of blocks. Simulation of upsetforging of rectangular blocks under various friction condjtions was performed. Comparison of the computed results with experiments and FEM shows good agreement. It is shown that this techniquecan be used for 3D simulation of metal forming process.展开更多
Three-dimensional simulations of ferroelectric hysteresis and butterfly loops are carried out based on solving the time dependent Ginzburg-Landau equations using a finite volume method. The influence of externally mec...Three-dimensional simulations of ferroelectric hysteresis and butterfly loops are carried out based on solving the time dependent Ginzburg-Landau equations using a finite volume method. The influence of externally mechanical loadings with a tensile strain and a compressive strain on the hysteresis and butterfly loops is studied numerically. Different from the traditional finite element and finite difference methods, the finite volume method is applicable to simulate the ferroelectric phase transitions and properties of ferroelectric materials even for more realistic and physical problems.展开更多
基金supported by National Natural Science Foundation of China(Nos.92066108 and 51277061)。
文摘The initial shape of the secondary arc considerably influences its subsequent shape.To establish the model for the arcing time of the secondary arc and modify the single-phase reclosing sequence,theoretical and experimental analysis of the evolution process of the short-circuit arc to the secondary arc is critical.In this study,an improved charge simulation method was used to develop the internal-space electric-field model of the short-circuit arc.The intensity of the electric field was used as an independent variable to describe the initial shape of the secondary arc.A secondary arc evolution model was developed based on this model.Moreover,the accuracy of the model was evaluated by comparison with physical experimental results.When the secondary arc current increased,the arcing time and dispersion increased.There is an overall trend of increasing arc length with increasing arcing time.Nevertheless,there is a reduction in arc length during arc ignition due to short circuits between the arc columns.Furthermore,the arcing time decreased in the range of 0°-90°as the angle between the wind direction and the x-axis increased.This work investigated the method by which short-circuit arcs evolve into secondary arcs.The results can be used to develop the secondary arc evolution model and to provide both a technical and theoretical basis for secondary arc suppression.
基金financial support from the National Natural Science Foundation of China(Grant Nos.52022053 and 51879153)the China National Postdoctoral Program for Innovative Talents(Grant No.BX2021172)。
文摘It is difficult to temporally and spatially track and characterize the slurry viscosity in flowing water during grouting simulation.In this study,a sequential flow and solidification(SFS)method considering the spatial-temporal evolution of slurry viscosity in flowing water in karst conduit is proposed.First,a time-dependent model for the threshold function of slurry viscosity is established.During the grouting process,the spatial-temporal evolution of slurry viscosity is revealed by tracking the diffusion behavior of the slurry injected at different times.This method is capable of describing the gradual solidification process of the slurry during grouting.Furthermore,a physical model of grouting in a karst conduit is developed.Second,the effectiveness of the SFS method in grouting simulation is verified by the experiment of grouting conduit in flowing water.The SFS method enables real-time monitoring of fluid velocity and pressure during grouting in flowing water and provides a feasible calculation method for revealing the grouting plugging mechanism in complex karst conduits at different engineering scales.In addition,it can be used to guide the design of grouting tests in flowing water,improve cost efficiency,and provide theoretical basis for optimizing grouting design and slurry selection.
基金Projects(11702235,51641905,41472269) supported by the National Natural Science Foundation of ChinaProject(2017JJ3290) supported by the Natural Science Foundation of Hunan Province,China+1 种基金Project(17C1540) supported by the Scientific Research Foundation of Education Department of Hunan Province,ChinaProject(16GES07) supported by the Open Research Fund of Hunan Key Laboratory of Geomechanics and Engineering Safety,China
文摘The particle simulation method is used to study the effects of loading waveforms （i.e. square, sinusoidal and triangle waveforms） on rock damage at mesoscopic scale. Then some influencing factors on rock damage at the mesoscopic scale, such as loading frequency, stress amplitude, mean stress, confining pressure and loading sequence, are also investigated with sinusoidal waveform in detail. The related numerical results have demonstrated that： 1） the loading waveform has a certain effect on rock failure processes. The square waveform has the most damage within these waveforms, while the triangle waveform has less damage than sinusoidal waveform. In each cycle, the number of microscopic cracks increases in the loading stage, while it keeps nearly constant in the unloading stage. 2） The loading frequency, stress amplitude, mean stress, confining pressure and loading sequence have considerable effects on rock damage subjected to cyclic loading. The higher the loading frequency, stress amplitude and mean stress, the greater the damage the rock accumulated; in contrast, the lower the confining pressure, the greater the damage the rock has accumulated. 3） There is a threshold value of mean stress and stress amplitude, below which no further damage accumulated after the first few cycle loadings. 4） The high-to-low loading sequence has more damage than the low-to-high loading sequence, suggesting that the rock damage is loading-path dependent.
基金supported by the National Natural Science Foundation of China (No. 52075350)the Special City School Strategic Cooperation Project of Sichuan University and Zigong (No.2021CDZG-3)
文摘The control rod drive mechanism(CRDM)is an essential part of the control and safety protection system of pressurized water reactors.Current CRDM simulations are mostly performed collectively using a single method,ignoring the influence of multiple motion units and the differences in various features among them,which strongly affect the efficiency and accuracy of the simulations.In this study,we constructed a flow field fusion simulation method based on model features by combining key motion unit analysis and various simulation methods and then applied the method to the CRDM simulation process.CRDM performs motion unit decomposition through the structural hierarchy of function-movement-action method,and the key meta-actions are identified as the nodes in the flow field simulation.We established a fused feature-based multimethod simulation process and processed the simulation methods and data according to the features of the fluid domain space and the structural complexity to obtain the fusion simulation results.Compared to traditional simulation methods and real measurements,the simulation method provides advantages in terms of simulation efficiency and accuracy.
基金The National Natural Science Foundation of China(No.62173122)the Hebei Key Project of Natural Science Foundation(No.F2021201031)。
文摘A passive simulation method based on the six degrees of freedom(6-DOF)model and dynamic mesh is proposed according to the working principle to study the dynamic characteristics of the turbine flow sensors.This simulation method controls the six degrees of freedom of the impeller using the user-defined functions(UDF)program so that it can only rotate under the impact of fluid.The impeller speed can be calculated in real-time,and the inlet speed can be set with time to obtain the dynamic performance of the turbine flow sensors.Based on this simulation method,three turbine flow sensors with different diameters were simulated,and the reliability of the simulation method was verified by both steady-state and unsteady-state experiments.The results show that the trend of meter factor with flow rate acquired from the simulation is close to the experimental results.The deviation between the simulation and experiment results is low,with a maximum deviation of 2.88%.In the unsteady simulation study,the impeller speed changed with the inlet velocity of the turbine flow sensor,showing good tracking performance.The passive simulation method can be used to predict the dynamic performance of the turbine flow sensor.
文摘Accurate thermal simulation is the key in the simulation approach to defining the unique microstructure and properties of the HAZ regions. Simulation enables an expansion of the volume of material char- acteristic of each H4Z region to a sufficient size for property determination.The combined influence of heat input,preheat temperature, plate thickness, and widing process on HAZ microstructure and properties relics on the accurate simulation of thermal cycles corresponding to different peak temperatures using an HAZ simulator like the Gleeble.Several computer programs have been developed to predict thermal excursions in various HAZ regions during welding. Some were developed based simply on the thermal propertics of a material;whereas, others were generated on the basis of actual experimental data.A suitable HAZ thermal simulation program must be ons that can authntically duplicate an ac- tual thermal cycle experienced during welding within reasonable limies. Therefore, the similarities and differences among the HAZ thermal cycles predicted by various methodologies should be fully under- stood. A total of sts thermal cycle prediction methodologies were compared in this evaluation. It was de- termined that some HAZ simulation programs have sever limitations due to the idealized assumptions considered in their development.According to the experieare at The University of Tennessee and the comparison results in this study, the HAZ thermal simulation programs; ' HAZ Calculator' and F(s, d); are recommended for accurate HAZ thermal cycle duplication.
基金supported by National Natural Science Foundation of China,China(62173122)Hebei Key Project of Natural Science Foundation(F2021201031)Beijing-Tianjin-Hebei Collaborative Innovation Community Construction Project(20540301D)
文摘Computational Fluid Dynamics(CFD)simulation is one of the important methods to study the performance and influencing factors of turbine flow sensors.According to the working characteristics of the turbine flow sensor,the passive simulation method based on the six degrees of freedom(6-DOF)model and dynamic mesh is proposed in this paper.The reliability of the simulation method is verified by steady-state experiments and unsteady-state experiments.The results show that the trend of meter factor with flow rate acquired from the simulation is close to the experimental results,and the deviation between the simulation result and the experiment result is low with a maximum deviation of 2.88%.In the unsteady simulation study,the impeller speed changes with the inlet velocity of the turbine flow sensor,which has a good follow-up.The passive simulation method can be used to predict the dynamic performance of the turbine flow sensor.
基金This work was supported by a grant from the National Nature Science Foundation of China(No 51490680,No 51490683)。
文摘In the analysis of power electronics system,it is necessary to simulate ordinary differential equations(ODEs)with discontinuities and stiffness.However,there are many difficulties in using traditional discrete-time algorithms to solve such equations.Kofman and others presented the quantized state systems(QSS)algorithm in the discrete event system specification(DEVS)formalism.The discretization is applied to the state variables instead of time range in QSS.QSS is efficient to solve ODEs,but it is difficulty to be used when simulating actual power electronics systems with controller’s and other events.Based on the idea of this numerical algorithm and discrete event,a Discrete State Event Driven(DSED)simulation method is presented in this paper,which is fit for simulation of power electronics system.The method is developed to deal with non-linearity,stiffness and multi-time scale of power electronics systems.The DSED simulation method includes event definition,module seperation and modeling,event-driven mechanisms,numerical computation based on QSS,and some other operations.Simulation results verified the effectiveness and validity of the proposed method.
基金Funded by the Natural Science Foundation of Jiangsu Province(No.BK20241529)China Postdoctoral Science Foundation(No.2024M750736)。
文摘This study aims to develop a chloride diffusion simulation method that considers the hydration microstructure and pore solution properties during the hydration of tricalcium silicate(C3S).The method combines the hydration simulation,thermodynamic calculation,and finite element analysis to examine the effects of pore solution,including effect of electrochemical potential,effect of chemical activity,and effect of mechanical interactions between ions,on the chloride effective diffusion coefficient of hydrated C3S paste.The results indicate that the effect of electrochemical potential on chloride diffusion becomes stronger with increasing hydration age due to the increase in the content of hydrated calcium silicate;as the hydration age increases,the effect of chemical activity on chloride diffusion weakens when the number of diffusible elements decreases;the effect of mechanical interactions between ions on chloride diffusion decreases with the increase of hydration age.
基金funded by the Ministry of Education, Science and Technological Development of the Republic of Serbia via the FAMA project (research topic “Physics and chemistry with ion beams”)。
文摘Without knowing the emittance value, it is difficult to optimize ion beam optics for minimum beam loss during transmission, especially considering the very high emittance values of electron cyclotron resonance(ECR) ion sources.With this in mind, to measure the emittance of the ion beams produced by the mVINIS ECR, which is part of the FAMA facility at the Vin?a Institute of Nuclear Sciences, we have developed a pepper-pot scintillator screen system combined with a CMOS camera. The application, developed on the Lab VIEW platform, allows us to control the camera's main attribute settings, such as the shutter speed and the gain, record the images in the region of interest, and process and filter the images in real time. To analyze the data from the obtained image, we have developed an algorithm called measurement and analysis of ion beam luminosity(MAIBL) to reconstruct the four-dimensional(4D) beam profile and calculate the root mean square(RMS) emittance. Before measuring emittance, we performed a simulated experiment using the pepper-pot simulation(PPS) program. An exported file(PPS) gives a numerically generated raw image(mock image) of a beam with a predefined emittance value after it has passed through a pepper-pot mask. By analyzing data from mock images instead of the image obtained by the camera and putting it into the MAIBL algorithm, we can compare the calculated emittance with PPS's initial emittance value. In this paper, we present our computational tools and explain the method for verifying the correctness of the calculated emittance values.
基金supported by the National Natural Science Foundation of China(Grant 61261007)the Key Program of Yunnan Natural Science Foundation(Grant 2013FA008)
文摘Ultrasound simulation for carotid arteries is helpful to the performance assessments of vessel wall detection and signal processing methods by using ultrasound techniques. An ul- trasound simulation method of carotid artery wall with a three-membrane structure is proposed in present study. According to the ultrasound speckle distributions varying with the shapes and densities of scatterer distributions, as well as the statistic results of the clinical images, the parameters of distributions, densities and intensities of scatterers for different kinds of tissues in the carotid artery phantoms are determined. Each region is acoustically characterized using FIELD II software to produce the radio frequency echo signals, from which ultrasound images are derived. The results based on 30 simulations show that the echo distributions of the intimae, mediae, adventitias and blood are consistent with the clinical ones. Moreover, compared with the results from the central frequency of 8 MHz, the mean measurements for thicknesses of the intima, media and adventitia membranes, as well as the lumen diameter from the simulation images based on 12 MHz are the same as the preset ones, and the maximum relative errors are the 4.01%, 1.25%, 0.04% and 0.15%, respectively. The simulation under this condition is more realistic.
文摘A simplified simulation method based on the FDTD technique that can handle active devices is proposed. This method well suits the electrical crosstalk analysis of multi-channel integrated, opto-electronic mixed modules. We apply this method to an 8-channel integrated super-compact high-sensitivity optical module. The results show good agreement between simulations and measurements.
基金co-supported by the National Science and Technology Major Project,China(No.J2019-I-0015-0014)the National Natural Science Foundation of China(No.52372397).
文摘To design the optimum acceleration control schedule for the Adaptive Cycle Engine(ACE)in the full flight envelope,this paper establishes a direct simulation model of the ACE transient state.In this model,geometric parameters are used to replace the component state parameters.The corresponding relationship between geometric parameters and component state parameters is determined by sensitivity analysis.The geometric variables are controlled when the geometric adjustment speed exceeds the limit,and at the same time the corresponding component state parameters are iterated.The gradient optimization algorism is used to optimize the ground acceleration process of ACE,and the control schedule in terms of operating point of compression components and corrected acceleration rate is used as the full-envelope acceleration control schedule based on the similarity principle.The acceleration control schedules of the triple-bypass mode and the double-bypass mode are designed in this paper.The acceleration processes under various flight conditions are simulated using the acceleration control schedules.Compared with the acceleration process with the linear geometric adjustment schedule,the acceleration performance of ACE is improved by the acceleration control schedule,with the impulse of the acceleration process of the triple-bypass mode being increased by 8.7%-12.3% and the impulse of the double-bypass mode acceleration process being increased by 11.8%-14.1%.
基金Project(41074085)supported by the National Natural Science Foundation of ChinaProject(NCET-12-0551)supported by the Funds for New Century Excellent Talents in University,ChinaProject supported by Shenghua Yuying Program of Central South University,China
文摘An element-free Galerkin method(EFGM) is used to solve the two-dimensional(2D) ground penetrating radar(GPR)modelling problems, due to its simple pre-processing, the absence of elements and high accuracy. Different from element-based numerical methods, this approach makes nodes free from the elemental restraint and avoids the explicit mesh discretization. First, we derived the boundary value problem for the 2D GPR simulation problems. Second, a penalty function approach and a boundary condition truncated method were used to enforce the essential and the absorbing boundary conditions, respectively. A three-layered GPR model was used to verify our element-free approach. The numerical solutions show that our solutions have an excellent agreement with solutions of a finite element method(FEM). Then, we used the EFGM to simulate one more complex model to show its capability and limitations. Simulation results show that one obvious advantage of EFGM is the absence of element mesh, which makes the method very flexible. Due to the use of MLS fitting, a key feature of EFM, is that both the dependent variable and its gradient are continuous and have high precision.
基金supported by the Natural Sciences and Engineering Research Council of Canada through Discovery Grant 341275 (G. Grasselli) and Engage EGP 461019-13
文摘Hydraulic fracturing （HF） technique has been extensively used for the exploitation of unconventional oiland gas reservoirs. HF enhances the connectivity of less permeable oil and gas-bearing rock formationsby fluid injection, which creates an interconnected fracture network and increases the hydrocarbonproduction. Meanwhile, microseismic （MS） monitoring is one of the most effective approaches to evaluatesuch stimulation process. In this paper, the combined finite-discrete element method （FDEM） isadopted to numerically simulate HF and associated MS. Several post-processing tools, includingfrequency-magnitude distribution （b-value）, fractal dimension （D-value）, and seismic events clustering,are utilized to interpret numerical results. A non-parametric clustering algorithm designed specificallyfor FDEM is used to reduce the mesh dependency and extract more realistic seismic information.Simulation results indicated that at the local scale, the HF process tends to propagate following the rockmass discontinuities; while at the reservoir scale, it tends to develop in the direction parallel to themaximum in-situ stress. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.
文摘This paper describes a way of solving the reservoir simulation pressure equation using mulligrid technique. The subroutine MG of four-grid method is presented. The result for 2-D two-phase problem is exactly the same as that of the SOR method and the CPU time is much less than that of the latter one.
文摘Objective: to observe the effectiveness of scene simulation teaching method in surgical nursing practice. Methods: in September of 1950s, the residents of our hospital were randomly divided into two groups. The control group (n30) used traditional teaching method, while the research group (n30) used simulated situational teaching method. Results: the theoretical score of the research group was (87.58-5.78) and that of the control group was (73.12-4.86). The scores of professional skills and comprehensive accomplishment of the research group were higher than those of the control group, with statistical significance (p 0.05). The satisfaction of the study group and the control group was 96.7% and 73.3% respectively, with significant difference between the two groups (p 0.05). Conclusion: scene simulation teaching method in surgical nursing practice can effectively improve students assessment results, help students to master the corresponding nursing skills, and has the value of popularization and application.
文摘The variation principle is discussed and Rayleigh-Ritz method is proposed for construction of veloci ty field. A kinematically admissible velocity field based on polynomials was appIied to the determina tion of forging load and deformed buIge profile during upset forging of blocks. Simulation of upsetforging of rectangular blocks under various friction condjtions was performed. Comparison of the computed results with experiments and FEM shows good agreement. It is shown that this techniquecan be used for 3D simulation of metal forming process.
基金Supported by the Research Starting Funds for Imported Talents of Ningxia University under Grant No BQD2012011
文摘Three-dimensional simulations of ferroelectric hysteresis and butterfly loops are carried out based on solving the time dependent Ginzburg-Landau equations using a finite volume method. The influence of externally mechanical loadings with a tensile strain and a compressive strain on the hysteresis and butterfly loops is studied numerically. Different from the traditional finite element and finite difference methods, the finite volume method is applicable to simulate the ferroelectric phase transitions and properties of ferroelectric materials even for more realistic and physical problems.
