This work aims to investigate the thermo-poromechanical behavior of saturated silt clay(SC)under varying temperatures through experiments and constitutive modeling.A series of undrained triaxial compression tests was ...This work aims to investigate the thermo-poromechanical behavior of saturated silt clay(SC)under varying temperatures through experiments and constitutive modeling.A series of undrained triaxial compression tests was conducted on saturated SC with temperature ranges from 25℃to 60℃.The effects of temperature on the main poromechanical properties of saturated SC,such as stress-strain relations,pore pressure evolution,and strength parameters,were thoroughly examined.Based on the experimental results,a subtly thermodynamically consistent thermo-poromechanical model was established using the concept of effective plastic stress within the poromechanical framework.Plastic deformation was described with a specific yield criterion and non-associated plastic potential that both depend on the effective plastic stress and a simple hardening variable.Finally,this model was implemented by a semi-implicit return mapping algorithm(SRMA)and validated through the comparison of model predictions and experimental data.The proposed model accurately reproduces the main thermo-poromechanical characteristics observed in saturated SC.展开更多
Deep excavations in silt strata can lead to large deformation problems,posing risks to both the excavation and adjacent structures.This study combines field monitoring with numerical simulation to investigate the unde...Deep excavations in silt strata can lead to large deformation problems,posing risks to both the excavation and adjacent structures.This study combines field monitoring with numerical simulation to investigate the underlying mechanisms and key aspects associated with large deformation problems induced by deep excavation in silt strata in Shenzhen,China.The monitoring results reveal that,due to the weak property and creep effect of the silt strata,the maximum wall deflection in the first excavated section(Section 1)exceeds its controlled value at more than 93%of measurement points,reaching a peak value of 137.46 mm.Notably,the deformation exhibits prolonged development characteristics,with the diaphragm wall deflections contributing to 39%of the overall deformation magnitude during the construction of the base slab.Subsequently,numerical simulations are carried out to analyze and assess the primary factors influencing excavation-induced deformations,following the observation of large deformations.The simulations indicate that the low strength of the silt soil is a pivotal factor that results in significant deformations.Furthermore,the flexural stiffness of the diaphragm walls exerts a notable influence on the development of deformations.To address these concerns,an optimization study of potential treatment measures was performed during the subsequent excavation of Section 2.The combined treatment approach,which comprises the reinforcement of the silt layer within the excavation and the increase in the thickness of the diaphragm walls,has been demonstrated to offer an economically superior solution for the handling of thick silt strata.This approach has the effect of reducing the lateral wall displacement by 83.1%and the ground settlement by 70.8%,thereby ensuring the safe construction of the deep excavation.展开更多
How the strong segmentation of cascade reservoir dams and the spatiotemporal changes of sediment retention volume affect the river morphology adjustment in the reservoir area is a scientific issue worthy of exploratio...How the strong segmentation of cascade reservoir dams and the spatiotemporal changes of sediment retention volume affect the river morphology adjustment in the reservoir area is a scientific issue worthy of exploration.This study aims to reveal the adjustment mechanism of the thalweg longitudinal profile of cascade reservoirs.This study focuses on the Xiangjiaba and Xiluodu reservoirs located in the lower reaches of the Jinsha River.Utilizing multi-period observational data of thalweg elevation in reservoir reaches both before and after dam construction,the research employs statistical,geomorphological,and sedimentological methodologies to analyze variation characteristics in the measured curves,trend curves,and theoretical fitting curves of the thalweg longitudinal profile.The investigation ultimately reveals two distinct adjustment patterns in the longitudinal profiles of these cascade reservoirs:the concave curve type and the convex curve type.The former is characterized by weak riverbed scouring and silting changed to rapid aggradation in the upstream section of the reservoir area after dam closure,then changed to slow aggradation in the whole reservoir area,which is the common feature of reservoirs that were built earlier and are relatively located in the downstream(such as the Xiangjiaba Reservoir).The latter is characterized by a straight line or concave curve type with weak riverbed scouring and silting before the dam closure changed to a convex curve type with strong siltation after dam closure,which is the characteristic of reservoirs that were built later and are relatively located in the upstream(such as the Xiluodu Reservoir).The adjustment of the cascade reservoir longitudinal profile is controlled by the spatiotemporal changes of the sediment deposition volume and sedimentation rate in the reservoir area,and the alternating changes of the hydrodynamic gradient and regulation mode affect the spatial heterogeneity of the sedimentation rate.The research results are helpful for understanding the adjustment mechanism of the cascade reservoir longitudinal profile in similar areas and have a guiding role in predicting the adjustment trend of the cascade reservoir longitudinal profile without observation data.展开更多
In order to realize the resource utilization of construction waste,industrial waste slag and silt,this paper used Portland cement,mineral waste residue and phosphogypsum composite to make cementing material(CMPS)with ...In order to realize the resource utilization of construction waste,industrial waste slag and silt,this paper used Portland cement,mineral waste residue and phosphogypsum composite to make cementing material(CMPS)with construction waste recycled aggregate to solidify silt.The mechanical properties of the solidified silt were analyzed by laboratory solidification test and microscopic examination respectively.In order to clarify the mineral composition,microscopic morphology and pore characteristics of the regenerated aggregate and CMPS solidified silt,X-ray diffractometer(XRD),scanning electron microscope(SEM),and nitrogen adsorption pore analyzer(NA)were used to further explore and analyze the regenerated aggregate and CMPS solidified silt effectively,and further reveal the internal mechanism of the regenerated aggregate and CMPS solidified silt effectively.The experimental results show that the strength of Portland cement-mineral waste residue phosphogypsum terpolymer system curing agent increases by 107.34%than that of single Port-land cement solidified silt at 56 d,and the strength of CMPS solidified silt increases by 25.68%under the action of recycled aggregate framework.The curing age and moisture content of the silt have a high correlation with the strength of the solidified silt.Therefore,the influence law of the above two influencing factors on its mechanical properties is further explored and the strength prediction is made.The microscopic test results show that,based on the hydration of Port-land cement and the pozzolans reaction of mineral waste residue,the solidified system has produced calcium silicate hydrate gel and ettringite crystals with gelatinous properties,which helps to fill the pores and form a denser structure.展开更多
The channel back-siltation problem has been restricting the development of channels,and its monitoring is limited by funds and natural conditions.Moreover,predicting the channel back-siltation situation in a timely an...The channel back-siltation problem has been restricting the development of channels,and its monitoring is limited by funds and natural conditions.Moreover,predicting the channel back-siltation situation in a timely and accurate manner is difficult.Hence,a numerical simulation of the back-siltation problem in the sea area near the channel is of great significance to the maintenance of a channel.In this study,the back siltation of a deep-water channel in the Lanshan Port area of the Port of Rizhao after dredging is predicted.This paper relies on the MIKE 21 software to establish the wave,tidal current,and sediment numerical models and uses measured data from two observation stations in the study area for verification.On this basis,taking one month as an example,the entire project channel was divided into five sections,and three observation points were set on each section.The results show that the area with offshore siltation is located in the northerly direction of the artificial anti-wave building.Siltation occurred on the northern seabed in the sea a little farther from the shore.Siltation occurred on the seabed surface far away from the shoreline,and with the increase in the distance from the shoreline,the amount of siltation in the south,center,and north became gradually closed,and the results can be used to guide actual engineering practices.This study will play a positive role in promoting the dredging project of Rizhao Lanshan Port.展开更多
Many yellow silt layers have been identified in the Holocene sediments in the last lake of Lop Nur (playa), Xinjiang, northwestern China. Statistics of drill-hole cores have revealed more than one hundred layers, whic...Many yellow silt layers have been identified in the Holocene sediments in the last lake of Lop Nur (playa), Xinjiang, northwestern China. Statistics of drill-hole cores have revealed more than one hundred layers, which exhibit regularity in time sequence. Study has further verified that these yellow silt layers were deposited through eolian processes. The time-frequency distribution diagram shows an obvious peak occurring at about 8200 a B.P., which is consistent with the dry, windy and cold climate event occurring at 8200 a in other places around the world. Therefore, this event is regarded as a response to the global climate change.展开更多
Frothing is a main disease of highways in Yellow River Flood Field, due to the loss of dynamic strength of roadbed soils under the couple effects of temperature, salt, and vehicle traffic load. This is strongly linked...Frothing is a main disease of highways in Yellow River Flood Field, due to the loss of dynamic strength of roadbed soils under the couple effects of temperature, salt, and vehicle traffic load. This is strongly linked to the dynamic characteristics of silt in this region. To analyze these couple effects on the dynamic characteristics of silt, a series of tests(i.e., freeze-thaw cycling tests, vibration triaxial tests and ultrasonic wave velocity tests) were conducted and two kinds of silt(i.e., salt-free and 3%-salt silt) were designed. The results indicate that the dynamic shear strength and dynamic modulus decrease with increasing freeze-thaw cycles, while the damping ratio simultaneously increases. Furthermore, compared to salt-free silt, the decrement of dynamic shear strength and dynamic modulus of silt with 3% salt is more significant, but the damping ratio of 3%-salt silt is larger. In ultrasonic wave velocity tests, ultrasonic wave velocity of frozen soil specimens decreases as the number of freeze-thaw cycles increases. Based on the results of ultrasonic wave velocity tests, a preliminary model is proposed to evaluate damage of silt through field measurement ultrasonic data. The study could provide a theoretical basis for the treatment of silty soil highway.展开更多
The dynamic stress introduced in half elastic space by wave loading is characterized by the equation between the magnitude of half cyclic axial stress and cyclic torsion shear stress and the principal stress, whose di...The dynamic stress introduced in half elastic space by wave loading is characterized by the equation between the magnitude of half cyclic axial stress and cyclic torsion shear stress and the principal stress, whose direction rotates continuously and compression stress on seabed can be calculated by the use of small amplitude wave theory. With relationship curves of saturated silt of liquefaction cycles and cyclic stress ratios obtained by cyclic triaxial-torsional coupling shear tests and curve fitting method to different data points of relative density, it is suggested that the cyclic stress ratio corresponding to constant liquefaction impedance be taken as the critical cyclic stress ratio which implies liquefaction. There exists a linear relationship between critical cyclic stress ratio and relative density under different relative densities. Empirical formula for critical cyclic stress ratios of seabed liquefaction induced by wave loading under different relative densities is established. The possibility of seabed silt liquefaction and its influence factors are analyzed based on the small-amplitude wave theory and the data acquired in laboratory tests.展开更多
The possibility of preparing cementitious materials by the alkali-activated method using Yellow River sediment(The second largest river in China)as raw material and the modification effect on different slag addition w...The possibility of preparing cementitious materials by the alkali-activated method using Yellow River sediment(The second largest river in China)as raw material and the modification effect on different slag addition were investigated.Sodium silicate and calcium hydroxide were used as the activator,and the specimens were prepared by the press molding method.The hydration process,hydration products,pore characteristics,and mechanical properties were investigated using SEM/EDS,FTIR,TG/DTG,XRD,MIP,and uniaxial compressive strength experiments,respectively.The results showed that the compressive strength of the modified yellow river silt-based cementitious material was significantly increased when the water glass dosage was 12 wt%(Ms=1.8)and the slag dosage was 40%,and its 90-day maximum compressive strength could reach 53 MPa.展开更多
The characteristics of reactive magnesia(MgO)-carbonated silt in respect to long-term stability have not been well understood in severely cold climate despite the usage of reactive MgO in enhancing the engineering per...The characteristics of reactive magnesia(MgO)-carbonated silt in respect to long-term stability have not been well understood in severely cold climate despite the usage of reactive MgO in enhancing the engineering performances.Under the binder content of 15%and initial water content of 25%,MgO-admixed silt specimens were carbonized for 3 h and 6 h and then subjected to different numbers of freezingthawing(F-T)cycles.After different F-T cycles,the physico-mechanical properties of MgO-carbonated silt were analyzed in comparison with Portland cement(PC)-stabilized silt through physical and unconfined compression tests.Besides,a series of micro tests on MgO-carbonated specimens was performed including X-ray diffraction(XRD),scanning electron microscopy(SEM)and mercury intrusion porosimetry(MIP)tests.The results demonstrate that both mass change ratio and moisture content of carbonated/stabilized silt decrease,and these values of MgO-carbonated silt are significantly lower while the density is higher compared to PC-stabilized silt.The strengths and moduli of MgO-carbonated silt are still two times higher than those of PC-stabilized specimens and the strength change ratio of keeps above0.8 after F-T cycles.There is no visible transformation between nesquehonite and dypingite/hydromagnesite,although the XRD peaks of nesquehonite decrease and the bonding and filling effects weaken slightly.After 6 and 10 F-T cycles,the pore-size characteristics changed from a unimodal distribution to a three-peak and bimodal distribution,respectively.The total,macro and large pore volumes increase obviously while the medium and small pore volumes decrease except for intra-aggregate pore.The findings show better F-T durability of MgO-carbonated silt,which would be helpful for facilitating the application of MgO carbonation in the soil treatment.展开更多
Raising the in situ decomposition rate of natural gas hydrate and increasing the decomposition contact area are two main ways to raise the productivity of hydrate. An exploitation technique based on large borehole wit...Raising the in situ decomposition rate of natural gas hydrate and increasing the decomposition contact area are two main ways to raise the productivity of hydrate. An exploitation technique based on large borehole with multi-lateral branches (LB & MB) was proposed in this paper. This technique is mainly intended for the clayey silt hydrate reservoir in the South China Sea, and its main purpose is to alleviate the sand output from formation for maintaining the stability of the reservoir and to greatly increase the gas productivity of the reservoir. In this paper, the following aspects were mainly expounded: definition of the basic geometric parameters for layout of multi-lateral branches in clayey silt hydrate reservoir, simulation of the stimulation effect of a typical well profile with two branches, and prediction and simulation of the reservoir failure risk in a well profile with eight branches. The results show that the LB & MB effectively improves the flow field in the formation, raises the productivity of the reservoir and may also help to decrease the produced water-gas ratio (WGR). When the lateral branches spacing is too small, the failure zones around adjacent lateral branches overlap each other, possibly causing reservoir failure in a larger range. Therefore, the geometric parameters of multi-lateral branches depend on the dual control of the productivity and geotechnical risk factor of reservoir. Further study is being carried out, so as to obtain the optimal combination of parameters of multi-lateral branches.展开更多
To better understand the salinity effect on the compaction behaviour of soil,standard Proctor compaction test was conducted on soil samples with different salinities.Matric suction and small-strain shear modulus,G_(ma...To better understand the salinity effect on the compaction behaviour of soil,standard Proctor compaction test was conducted on soil samples with different salinities.Matric suction and small-strain shear modulus,G_(max),were determined and pore size distribution was also investigated on samples statically compacted at different water contents.Results showed that with the decrease of soil salinity from initial value of 2.1‰(g of salt/kg of dry soil)to zero,the maximum dry density increased and the optimum water content decreased,whereas there was no significant change with the increase of soil salinity from 2.1‰ to 6.76‰.Interestingly,it was observed that G_(max) also decreased when the soil salinity decreased from initial value of 2.1‰ to zero and kept almost constant when the soil salinity increased from 2.1‰ to 6.76‰,for dry samples with similar matric suction and also for samples compacted at optimum state and on wet side whose matric suctions were slightly different due to the difference in remoulded water content.Furthermore,the effect of salinity on compaction behaviour and G_(max) decreased for samples compacted from dry side to wet side.The pore size distribution exhibited bi-modal characteristics with two populations of micro-and macro-pores not only for samples compacted on dry side and at optimum state,but also for those compacted on wet side.Further examination showed that the modal size of micro-pores shifted to lower values and that of macro-pores shifted to higher values for saline soil compared to the soil without salt.展开更多
The soil type is a key factor influencing N(nitrogen)cycling in soil;however,gross N transformations and N_(2)O emission sources are still poorly understood.In this study,a laboratory 15N tracing experiment was carrie...The soil type is a key factor influencing N(nitrogen)cycling in soil;however,gross N transformations and N_(2)O emission sources are still poorly understood.In this study,a laboratory 15N tracing experiment was carried out at 60%WHC(water holding capacity)and 25℃to evaluate the gross N transformation rates and N_(2)O emission pathways in sandy loam and silt loam soils in a semi-arid region of Heilongjiang Province,China.The results showed that the gross rates of N mineralization,immobilization,and nitrification were 3.60,1.90,and 5.63 mg N/(kg·d)in silt loam soil,respectively,which were 3.62,4.26,and 3.13 times those in sandy loam soil,respectively.The ratios of the gross nitrification rate to the ammonium immobilization rate(n/ia)in sandy loam soil and silt loam soil were all higher than 1.00,whereas the n/ia in sandy loam soil(4.36)was significantly higher than that in silt loam soil(3.08).This result indicated that the ability of sandy loam soil to release and conserve the available N was relatively poor in comparison with silt loam soil,and the relatively strong nitrification rate compared to the immobilization rate may lead to N loss through NO_(3)–leaching.Under aerobic conditions,both nitrification and denitrification made contributions to N_(2)O emissions.Nitrification was the dominant pathway leading to N_(2)O production in soils and was responsible for 82.0%of the total emitted N_(2)O in sandy loam soil,which was significantly higher than that in silt loam soil(71.7%).However,the average contribution of denitrification to total N_(2)O production in sandy loam soil was 17.9%,which was significantly lower than that in silt loam soil(28.3%).These results are valuable for developing reasonable fertilization management and proposing effective greenhouse gas mitigation strategies in different soil types in semiarid regions.展开更多
Quaternary silt is widely distributed in China and easily liquefies during earthquakes. To identify the influence of the dry density on the liquefaction behaviour of Quaternary silt, 40 cyclic triaxial liquefaction te...Quaternary silt is widely distributed in China and easily liquefies during earthquakes. To identify the influence of the dry density on the liquefaction behaviour of Quaternary silt, 40 cyclic triaxial liquefaction tests were performed on loose silt(dry density rd=1.460 g/cm^3) and dense silt(rd=1.586 g/cm^3) under different cyclic stress ratios(CSRs) to obtain liquefaction assessment criteria, determine the liquefaction resistance, improve the excess pore water pressure(EPWP) growth model and clarify the relationship between the shear modulus and damping ratio. The results indicate that the initial liquefaction assessment criteria for the loose and dense silts are a double-amplitude axial strain of 5% and an EPWP ratio of 1. The increase in the anti-liquefaction ability for the dense silt is more significant under lower confining pressures. The CSR of loose silt falls well within the results of the sandy silt and Fraser River silt, and the dense silt exhibits a higher liquefaction resistance than the sand-silt mixture. The relationships between the CSR and loading cycles were obtained at a failure strain of 1%. The EPWP development in the dense and loose silts complies with the "fast-stable" and "fast-gentle-sharp" growth modes, respectively. The power function model can effectively describe the EPWP growth characteristics of the dense silt. Finally, based on the liquefaction behaviour of silt, a suggestion for reinforcing silt slopes or foundations is proposed.展开更多
A flume experiment was conducted to investigate the restratification of liquefied sediment strata under a wave load with the focus on the interbedded strata of coarse and fine sediments formed in estuarine and coastal...A flume experiment was conducted to investigate the restratification of liquefied sediment strata under a wave load with the focus on the interbedded strata of coarse and fine sediments formed in estuarine and coastal areas.The aim of this research was to study the characteristics and processes of liquefied sediment strata in terms of wave-induced liquefaction.In the experiment,the bottom bed liquefied under the wave action and the liquefied soil moved in the same period with the overlying waves,and the track of the soil particles in the liquefied soil was an ellipse.The sand layer consisting of coarse particles in the upper part,settled into the lower silt layer.The sinking of coarse particles and upward migration of the fine particles of the lower layer induced by liquefied sediment fluctuations are the likely reasons for sedimentation of the sand layer in liquefied silt.展开更多
Natural gas hydrate(NGH)is an important future resource for the 21st century and a strategic resource with potential for commercial development in the third energy transition.It is of great significance to accurately ...Natural gas hydrate(NGH)is an important future resource for the 21st century and a strategic resource with potential for commercial development in the third energy transition.It is of great significance to accurately predict the productivity of hydrate-bearing sediments(HBS).The multi-phase seepage parameters of HBS include permeability,porosity,which is closely related to permeability,and hydrate saturation,which has a direct impact on hydrate content.Existing research has shown that these multi-phase seepage parameters have a great impact on HBS productivity.Permeability directly affects the transmission of pressure-drop and discharge of methane gas,porosity and initial hydrate saturation affect the amount of hydrate decomposition and transmission process of pressure-drop,and also indirectly affect temperature variation of the reservoir.Considering the spatial heterogeneity of multi-phase seepage parameters,a depressurization production model with layered heterogeneity is established based on the clayey silt hydrate reservoir at W11 station in the Shenhu Sea area of the South China Sea.Tough+Hydrate software was used to calculate the production model;the process of gas production and seepage parameter evolution under different multi-phase seepage conditions were obtained.A sensitivity analysis of the parameters affecting the reservoir productivity was conducted so that:(a)a HBS model with layered heterogeneity can better describe the transmission process of pressure and thermal compensation mechanism of hydrate reservoir;(b)considering the multi-phase seepage parameter heterogeneity,the influence degrees of the parameters on HBS productivity were permeability,porosity and initial hydrate saturation,in order from large to small,and the influence of permeability was significantly greater than that of other parameters;(c)the production potential of the clayey silt reservoir should not only be determined by hydrate content or seepage capacity,but also by the comprehensive effect of the two;and(d)time scales need to be considered when studying the effects of changes in multi-phase seepage parameters on HBS productivity.展开更多
In order to identify the critical properties and failure criteria of in-situ silt under vehicle or wave loading, anisotropically consolidated silt under undrained cyclic principal stress rotation was studied with holl...In order to identify the critical properties and failure criteria of in-situ silt under vehicle or wave loading, anisotropically consolidated silt under undrained cyclic principal stress rotation was studied with hollow cylinder dynamic tests. The results show that for the slightly anisotropically consolidated samples with consolidation ratios no larger than 1.5, the structure collapses and the deviator strain and pore pressure increase sharply to fail after collapse. For the highly anisotropically consolidated samples with consolidation ratios larger than 1.5, the strain increases steadily to high values, which shows characteristics of ductile failure. 4% is suggested to be the threshold value of deviator stain to determine the occurrence of collapse. The normalized relationship between pore pressure and deviator strain can be correlated by a power fimction for all the anisotropically consolidated samples. Based on it, for the highly anisotropically consolidated samples, the appearance of inflection point on the power function curve is suggested to sign the failure. It can be predicted through the convex pore pressure at this point, whose ratio to the ultimate pore pressure is around linear with the consolidation ratio in spite of the dynamic shear stress level. And the corresponding deviator strain is between 3% and 6%. The strain failure criterion can also be adopted, but the limited value of stain should be determined according to engineering practice. As for the slightly anisotropically consolidated samples, the turning points appear after collapse. So, the failure is suggested to be defined with the occurrence of collapse and the collapse pore pressure can be predicted with the ultimate pore pressure and consolidation ratio.展开更多
基金supported by the National Natural Science Foun-dation of China(Grant No.52478335)the 2023 Annual Science and Technology Project of Jiangsu Province Construction System(Grant No.90)the Science and Technology Research and Develop-ment Topic of CSCEC 7th Division(Grant No.CSCEC7b-2024-Z-4).
文摘This work aims to investigate the thermo-poromechanical behavior of saturated silt clay(SC)under varying temperatures through experiments and constitutive modeling.A series of undrained triaxial compression tests was conducted on saturated SC with temperature ranges from 25℃to 60℃.The effects of temperature on the main poromechanical properties of saturated SC,such as stress-strain relations,pore pressure evolution,and strength parameters,were thoroughly examined.Based on the experimental results,a subtly thermodynamically consistent thermo-poromechanical model was established using the concept of effective plastic stress within the poromechanical framework.Plastic deformation was described with a specific yield criterion and non-associated plastic potential that both depend on the effective plastic stress and a simple hardening variable.Finally,this model was implemented by a semi-implicit return mapping algorithm(SRMA)and validated through the comparison of model predictions and experimental data.The proposed model accurately reproduces the main thermo-poromechanical characteristics observed in saturated SC.
基金supported by the National Natural Science Foundation of China (Grant Nos.52008039 and 52308425)the Natural Science Foundation of Hunan Province (Grant No.2021JJ40592).
文摘Deep excavations in silt strata can lead to large deformation problems,posing risks to both the excavation and adjacent structures.This study combines field monitoring with numerical simulation to investigate the underlying mechanisms and key aspects associated with large deformation problems induced by deep excavation in silt strata in Shenzhen,China.The monitoring results reveal that,due to the weak property and creep effect of the silt strata,the maximum wall deflection in the first excavated section(Section 1)exceeds its controlled value at more than 93%of measurement points,reaching a peak value of 137.46 mm.Notably,the deformation exhibits prolonged development characteristics,with the diaphragm wall deflections contributing to 39%of the overall deformation magnitude during the construction of the base slab.Subsequently,numerical simulations are carried out to analyze and assess the primary factors influencing excavation-induced deformations,following the observation of large deformations.The simulations indicate that the low strength of the silt soil is a pivotal factor that results in significant deformations.Furthermore,the flexural stiffness of the diaphragm walls exerts a notable influence on the development of deformations.To address these concerns,an optimization study of potential treatment measures was performed during the subsequent excavation of Section 2.The combined treatment approach,which comprises the reinforcement of the silt layer within the excavation and the increase in the thickness of the diaphragm walls,has been demonstrated to offer an economically superior solution for the handling of thick silt strata.This approach has the effect of reducing the lateral wall displacement by 83.1%and the ground settlement by 70.8%,thereby ensuring the safe construction of the deep excavation.
基金National Key R&D Program of China,No.2022YFC3203903National Natural Science Foundation of China,No.42371010,No.41971004。
文摘How the strong segmentation of cascade reservoir dams and the spatiotemporal changes of sediment retention volume affect the river morphology adjustment in the reservoir area is a scientific issue worthy of exploration.This study aims to reveal the adjustment mechanism of the thalweg longitudinal profile of cascade reservoirs.This study focuses on the Xiangjiaba and Xiluodu reservoirs located in the lower reaches of the Jinsha River.Utilizing multi-period observational data of thalweg elevation in reservoir reaches both before and after dam construction,the research employs statistical,geomorphological,and sedimentological methodologies to analyze variation characteristics in the measured curves,trend curves,and theoretical fitting curves of the thalweg longitudinal profile.The investigation ultimately reveals two distinct adjustment patterns in the longitudinal profiles of these cascade reservoirs:the concave curve type and the convex curve type.The former is characterized by weak riverbed scouring and silting changed to rapid aggradation in the upstream section of the reservoir area after dam closure,then changed to slow aggradation in the whole reservoir area,which is the common feature of reservoirs that were built earlier and are relatively located in the downstream(such as the Xiangjiaba Reservoir).The latter is characterized by a straight line or concave curve type with weak riverbed scouring and silting before the dam closure changed to a convex curve type with strong siltation after dam closure,which is the characteristic of reservoirs that were built later and are relatively located in the upstream(such as the Xiluodu Reservoir).The adjustment of the cascade reservoir longitudinal profile is controlled by the spatiotemporal changes of the sediment deposition volume and sedimentation rate in the reservoir area,and the alternating changes of the hydrodynamic gradient and regulation mode affect the spatial heterogeneity of the sedimentation rate.The research results are helpful for understanding the adjustment mechanism of the cascade reservoir longitudinal profile in similar areas and have a guiding role in predicting the adjustment trend of the cascade reservoir longitudinal profile without observation data.
基金Funded by the Jiangsu Province Industry University Research Project(No.BY20231142)the Yangzhou Science&Technology Program(No.YZ2023061)the Zhenjiang Science&Technology Program(No.SH2022018)。
文摘In order to realize the resource utilization of construction waste,industrial waste slag and silt,this paper used Portland cement,mineral waste residue and phosphogypsum composite to make cementing material(CMPS)with construction waste recycled aggregate to solidify silt.The mechanical properties of the solidified silt were analyzed by laboratory solidification test and microscopic examination respectively.In order to clarify the mineral composition,microscopic morphology and pore characteristics of the regenerated aggregate and CMPS solidified silt,X-ray diffractometer(XRD),scanning electron microscope(SEM),and nitrogen adsorption pore analyzer(NA)were used to further explore and analyze the regenerated aggregate and CMPS solidified silt effectively,and further reveal the internal mechanism of the regenerated aggregate and CMPS solidified silt effectively.The experimental results show that the strength of Portland cement-mineral waste residue phosphogypsum terpolymer system curing agent increases by 107.34%than that of single Port-land cement solidified silt at 56 d,and the strength of CMPS solidified silt increases by 25.68%under the action of recycled aggregate framework.The curing age and moisture content of the silt have a high correlation with the strength of the solidified silt.Therefore,the influence law of the above two influencing factors on its mechanical properties is further explored and the strength prediction is made.The microscopic test results show that,based on the hydration of Port-land cement and the pozzolans reaction of mineral waste residue,the solidified system has produced calcium silicate hydrate gel and ettringite crystals with gelatinous properties,which helps to fill the pores and form a denser structure.
基金The study is supported by the Guangxi Key Laboratory of Marine Environmental Science,Guangxi Academy of Sciences(No.GXKLHY21-04)the Special Funds for Fun-damental Scientific Research Operation of Central Universities(No.202113011)+2 种基金the Shandong Provincial Social Science Planning Research Youth Project(No.21DSHJ2)NSFC-Shandong Joint Fund(No.U1706215)the Tian-jin Philosophy and Social Science Planning Project of China(No.TJKS20XSX-015).
文摘The channel back-siltation problem has been restricting the development of channels,and its monitoring is limited by funds and natural conditions.Moreover,predicting the channel back-siltation situation in a timely and accurate manner is difficult.Hence,a numerical simulation of the back-siltation problem in the sea area near the channel is of great significance to the maintenance of a channel.In this study,the back siltation of a deep-water channel in the Lanshan Port area of the Port of Rizhao after dredging is predicted.This paper relies on the MIKE 21 software to establish the wave,tidal current,and sediment numerical models and uses measured data from two observation stations in the study area for verification.On this basis,taking one month as an example,the entire project channel was divided into five sections,and three observation points were set on each section.The results show that the area with offshore siltation is located in the northerly direction of the artificial anti-wave building.Siltation occurred on the northern seabed in the sea a little farther from the shore.Siltation occurred on the seabed surface far away from the shoreline,and with the increase in the distance from the shoreline,the amount of siltation in the south,center,and north became gradually closed,and the results can be used to guide actual engineering practices.This study will play a positive role in promoting the dredging project of Rizhao Lanshan Port.
基金supported by the Orientated Fund Project (DKD95-22)of the former Ministry of Geology and Mineral Resources of Chinathe"305"Project(96-916-08-05)of the Ministry of Science and Technology of China
文摘Many yellow silt layers have been identified in the Holocene sediments in the last lake of Lop Nur (playa), Xinjiang, northwestern China. Statistics of drill-hole cores have revealed more than one hundred layers, which exhibit regularity in time sequence. Study has further verified that these yellow silt layers were deposited through eolian processes. The time-frequency distribution diagram shows an obvious peak occurring at about 8200 a B.P., which is consistent with the dry, windy and cold climate event occurring at 8200 a in other places around the world. Therefore, this event is regarded as a response to the global climate change.
基金Project(2018YFB1600100) supported by the National Key Research and Development Project of ChinaProjects(51778346, 51508310) supported by the National Natural Science Foundation of ChinaProject(2019GSF111007) supported by Key Research and Development Project of Shandong Province, China。
文摘Frothing is a main disease of highways in Yellow River Flood Field, due to the loss of dynamic strength of roadbed soils under the couple effects of temperature, salt, and vehicle traffic load. This is strongly linked to the dynamic characteristics of silt in this region. To analyze these couple effects on the dynamic characteristics of silt, a series of tests(i.e., freeze-thaw cycling tests, vibration triaxial tests and ultrasonic wave velocity tests) were conducted and two kinds of silt(i.e., salt-free and 3%-salt silt) were designed. The results indicate that the dynamic shear strength and dynamic modulus decrease with increasing freeze-thaw cycles, while the damping ratio simultaneously increases. Furthermore, compared to salt-free silt, the decrement of dynamic shear strength and dynamic modulus of silt with 3% salt is more significant, but the damping ratio of 3%-salt silt is larger. In ultrasonic wave velocity tests, ultrasonic wave velocity of frozen soil specimens decreases as the number of freeze-thaw cycles increases. Based on the results of ultrasonic wave velocity tests, a preliminary model is proposed to evaluate damage of silt through field measurement ultrasonic data. The study could provide a theoretical basis for the treatment of silty soil highway.
基金supported by the National Natural Science Foundation of China(Grant Nos.50639010 and 50909039)the Fundamental Research Funds for the Central Universities(Grant No. 2010B04514)
文摘The dynamic stress introduced in half elastic space by wave loading is characterized by the equation between the magnitude of half cyclic axial stress and cyclic torsion shear stress and the principal stress, whose direction rotates continuously and compression stress on seabed can be calculated by the use of small amplitude wave theory. With relationship curves of saturated silt of liquefaction cycles and cyclic stress ratios obtained by cyclic triaxial-torsional coupling shear tests and curve fitting method to different data points of relative density, it is suggested that the cyclic stress ratio corresponding to constant liquefaction impedance be taken as the critical cyclic stress ratio which implies liquefaction. There exists a linear relationship between critical cyclic stress ratio and relative density under different relative densities. Empirical formula for critical cyclic stress ratios of seabed liquefaction induced by wave loading under different relative densities is established. The possibility of seabed silt liquefaction and its influence factors are analyzed based on the small-amplitude wave theory and the data acquired in laboratory tests.
基金Funded in part by the Joint Funds of National Natural Science Foundation of China(No.U20A20324)National Natural Science Foundation of China(No.51878116)+3 种基金Liaoning Province Key Project of Research and Development Plan(No.2020JH2/10100016)Dalian Science and Technology Innovation Fund Project(No.2020JJ26SN060)the National Natural Science Foundation of China(No.51809109)the National Key Research and Development Projects(No.2017YFC0504506)。
文摘The possibility of preparing cementitious materials by the alkali-activated method using Yellow River sediment(The second largest river in China)as raw material and the modification effect on different slag addition were investigated.Sodium silicate and calcium hydroxide were used as the activator,and the specimens were prepared by the press molding method.The hydration process,hydration products,pore characteristics,and mechanical properties were investigated using SEM/EDS,FTIR,TG/DTG,XRD,MIP,and uniaxial compressive strength experiments,respectively.The results showed that the compressive strength of the modified yellow river silt-based cementitious material was significantly increased when the water glass dosage was 12 wt%(Ms=1.8)and the slag dosage was 40%,and its 90-day maximum compressive strength could reach 53 MPa.
基金the support of the National Natural Science Foundation of China(Grant Nos.41902286 and 41972269)Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.Z019026)。
文摘The characteristics of reactive magnesia(MgO)-carbonated silt in respect to long-term stability have not been well understood in severely cold climate despite the usage of reactive MgO in enhancing the engineering performances.Under the binder content of 15%and initial water content of 25%,MgO-admixed silt specimens were carbonized for 3 h and 6 h and then subjected to different numbers of freezingthawing(F-T)cycles.After different F-T cycles,the physico-mechanical properties of MgO-carbonated silt were analyzed in comparison with Portland cement(PC)-stabilized silt through physical and unconfined compression tests.Besides,a series of micro tests on MgO-carbonated specimens was performed including X-ray diffraction(XRD),scanning electron microscopy(SEM)and mercury intrusion porosimetry(MIP)tests.The results demonstrate that both mass change ratio and moisture content of carbonated/stabilized silt decrease,and these values of MgO-carbonated silt are significantly lower while the density is higher compared to PC-stabilized silt.The strengths and moduli of MgO-carbonated silt are still two times higher than those of PC-stabilized specimens and the strength change ratio of keeps above0.8 after F-T cycles.There is no visible transformation between nesquehonite and dypingite/hydromagnesite,although the XRD peaks of nesquehonite decrease and the bonding and filling effects weaken slightly.After 6 and 10 F-T cycles,the pore-size characteristics changed from a unimodal distribution to a three-peak and bimodal distribution,respectively.The total,macro and large pore volumes increase obviously while the medium and small pore volumes decrease except for intra-aggregate pore.The findings show better F-T durability of MgO-carbonated silt,which would be helpful for facilitating the application of MgO carbonation in the soil treatment.
基金This research was supported by Project of Distinguished Experts of Taishan Scholars (ts201712079)Youth Foundation of National Natural Science Foundation of China (41606078)+1 种基金Open Foundation of Pilot National Laboratory for Marine Science and Technology (QNLM2016ORP0207)Marine Geological Survey Program (DD20190231). Anonymous reviewers and Dr. Hao Zi-guo and Dr. Yang Yan were grateful for their constructive suggestions on the manuscript.
文摘Raising the in situ decomposition rate of natural gas hydrate and increasing the decomposition contact area are two main ways to raise the productivity of hydrate. An exploitation technique based on large borehole with multi-lateral branches (LB & MB) was proposed in this paper. This technique is mainly intended for the clayey silt hydrate reservoir in the South China Sea, and its main purpose is to alleviate the sand output from formation for maintaining the stability of the reservoir and to greatly increase the gas productivity of the reservoir. In this paper, the following aspects were mainly expounded: definition of the basic geometric parameters for layout of multi-lateral branches in clayey silt hydrate reservoir, simulation of the stimulation effect of a typical well profile with two branches, and prediction and simulation of the reservoir failure risk in a well profile with eight branches. The results show that the LB & MB effectively improves the flow field in the formation, raises the productivity of the reservoir and may also help to decrease the produced water-gas ratio (WGR). When the lateral branches spacing is too small, the failure zones around adjacent lateral branches overlap each other, possibly causing reservoir failure in a larger range. Therefore, the geometric parameters of multi-lateral branches depend on the dual control of the productivity and geotechnical risk factor of reservoir. Further study is being carried out, so as to obtain the optimal combination of parameters of multi-lateral branches.
基金the China Scholarship Council(CSC)Ecole des Ponts ParisTech(ENPC)INRAE for their financial support。
文摘To better understand the salinity effect on the compaction behaviour of soil,standard Proctor compaction test was conducted on soil samples with different salinities.Matric suction and small-strain shear modulus,G_(max),were determined and pore size distribution was also investigated on samples statically compacted at different water contents.Results showed that with the decrease of soil salinity from initial value of 2.1‰(g of salt/kg of dry soil)to zero,the maximum dry density increased and the optimum water content decreased,whereas there was no significant change with the increase of soil salinity from 2.1‰ to 6.76‰.Interestingly,it was observed that G_(max) also decreased when the soil salinity decreased from initial value of 2.1‰ to zero and kept almost constant when the soil salinity increased from 2.1‰ to 6.76‰,for dry samples with similar matric suction and also for samples compacted at optimum state and on wet side whose matric suctions were slightly different due to the difference in remoulded water content.Furthermore,the effect of salinity on compaction behaviour and G_(max) decreased for samples compacted from dry side to wet side.The pore size distribution exhibited bi-modal characteristics with two populations of micro-and macro-pores not only for samples compacted on dry side and at optimum state,but also for those compacted on wet side.Further examination showed that the modal size of micro-pores shifted to lower values and that of macro-pores shifted to higher values for saline soil compared to the soil without salt.
基金financed by the National Natural Science Foundation of China(41301345,41101284)。
文摘The soil type is a key factor influencing N(nitrogen)cycling in soil;however,gross N transformations and N_(2)O emission sources are still poorly understood.In this study,a laboratory 15N tracing experiment was carried out at 60%WHC(water holding capacity)and 25℃to evaluate the gross N transformation rates and N_(2)O emission pathways in sandy loam and silt loam soils in a semi-arid region of Heilongjiang Province,China.The results showed that the gross rates of N mineralization,immobilization,and nitrification were 3.60,1.90,and 5.63 mg N/(kg·d)in silt loam soil,respectively,which were 3.62,4.26,and 3.13 times those in sandy loam soil,respectively.The ratios of the gross nitrification rate to the ammonium immobilization rate(n/ia)in sandy loam soil and silt loam soil were all higher than 1.00,whereas the n/ia in sandy loam soil(4.36)was significantly higher than that in silt loam soil(3.08).This result indicated that the ability of sandy loam soil to release and conserve the available N was relatively poor in comparison with silt loam soil,and the relatively strong nitrification rate compared to the immobilization rate may lead to N loss through NO_(3)–leaching.Under aerobic conditions,both nitrification and denitrification made contributions to N_(2)O emissions.Nitrification was the dominant pathway leading to N_(2)O production in soils and was responsible for 82.0%of the total emitted N_(2)O in sandy loam soil,which was significantly higher than that in silt loam soil(71.7%).However,the average contribution of denitrification to total N_(2)O production in sandy loam soil was 17.9%,which was significantly lower than that in silt loam soil(28.3%).These results are valuable for developing reasonable fertilization management and proposing effective greenhouse gas mitigation strategies in different soil types in semiarid regions.
基金financially supported by the National Natural Science Foundation of China (Grant No.41761144077)the CAS “Light of West China” Program (Grant No.Y6R2240240)+1 种基金the Key Research Program of Frontier Sciences,CAS (Grant No.QYZDB-SSW-DQC010)the Sichuan science and technology plan project (Grant No.2017JY0251)
文摘Quaternary silt is widely distributed in China and easily liquefies during earthquakes. To identify the influence of the dry density on the liquefaction behaviour of Quaternary silt, 40 cyclic triaxial liquefaction tests were performed on loose silt(dry density rd=1.460 g/cm^3) and dense silt(rd=1.586 g/cm^3) under different cyclic stress ratios(CSRs) to obtain liquefaction assessment criteria, determine the liquefaction resistance, improve the excess pore water pressure(EPWP) growth model and clarify the relationship between the shear modulus and damping ratio. The results indicate that the initial liquefaction assessment criteria for the loose and dense silts are a double-amplitude axial strain of 5% and an EPWP ratio of 1. The increase in the anti-liquefaction ability for the dense silt is more significant under lower confining pressures. The CSR of loose silt falls well within the results of the sandy silt and Fraser River silt, and the dense silt exhibits a higher liquefaction resistance than the sand-silt mixture. The relationships between the CSR and loading cycles were obtained at a failure strain of 1%. The EPWP development in the dense and loose silts complies with the "fast-stable" and "fast-gentle-sharp" growth modes, respectively. The power function model can effectively describe the EPWP growth characteristics of the dense silt. Finally, based on the liquefaction behaviour of silt, a suggestion for reinforcing silt slopes or foundations is proposed.
基金The funding for this project was provided by the National Natural Science Foundation of China(No.41976049)the Fundamental Research Funds for the Central Universities(No.202061028).
文摘A flume experiment was conducted to investigate the restratification of liquefied sediment strata under a wave load with the focus on the interbedded strata of coarse and fine sediments formed in estuarine and coastal areas.The aim of this research was to study the characteristics and processes of liquefied sediment strata in terms of wave-induced liquefaction.In the experiment,the bottom bed liquefied under the wave action and the liquefied soil moved in the same period with the overlying waves,and the track of the soil particles in the liquefied soil was an ellipse.The sand layer consisting of coarse particles in the upper part,settled into the lower silt layer.The sinking of coarse particles and upward migration of the fine particles of the lower layer induced by liquefied sediment fluctuations are the likely reasons for sedimentation of the sand layer in liquefied silt.
基金supported by the National Natural Science Foundation of China(Grant Nos.42276224,and 42206230)the Jilin Scientific and Technological Development Program(Grant No.20190303083SF)+2 种基金the International Cooperation Key Laboratory of Underground Energy Development and Geological Restoration(Grant No.YDZJ202102CXJD014)the Interdisciplinary Integration and Innovation Project of JLU(Grant No.JLUXKJC2021ZZ18)the Graduate Innovation Fund of Jilin University(Grant No.2023CX100)。
文摘Natural gas hydrate(NGH)is an important future resource for the 21st century and a strategic resource with potential for commercial development in the third energy transition.It is of great significance to accurately predict the productivity of hydrate-bearing sediments(HBS).The multi-phase seepage parameters of HBS include permeability,porosity,which is closely related to permeability,and hydrate saturation,which has a direct impact on hydrate content.Existing research has shown that these multi-phase seepage parameters have a great impact on HBS productivity.Permeability directly affects the transmission of pressure-drop and discharge of methane gas,porosity and initial hydrate saturation affect the amount of hydrate decomposition and transmission process of pressure-drop,and also indirectly affect temperature variation of the reservoir.Considering the spatial heterogeneity of multi-phase seepage parameters,a depressurization production model with layered heterogeneity is established based on the clayey silt hydrate reservoir at W11 station in the Shenhu Sea area of the South China Sea.Tough+Hydrate software was used to calculate the production model;the process of gas production and seepage parameter evolution under different multi-phase seepage conditions were obtained.A sensitivity analysis of the parameters affecting the reservoir productivity was conducted so that:(a)a HBS model with layered heterogeneity can better describe the transmission process of pressure and thermal compensation mechanism of hydrate reservoir;(b)considering the multi-phase seepage parameter heterogeneity,the influence degrees of the parameters on HBS productivity were permeability,porosity and initial hydrate saturation,in order from large to small,and the influence of permeability was significantly greater than that of other parameters;(c)the production potential of the clayey silt reservoir should not only be determined by hydrate content or seepage capacity,but also by the comprehensive effect of the two;and(d)time scales need to be considered when studying the effects of changes in multi-phase seepage parameters on HBS productivity.
基金Foundation item： Project（50909039） supported by the National Natural Science Foundation of China Project（IRTl125） supported by Program for Changjiang Scholars and Innovative Team in University of China
文摘In order to identify the critical properties and failure criteria of in-situ silt under vehicle or wave loading, anisotropically consolidated silt under undrained cyclic principal stress rotation was studied with hollow cylinder dynamic tests. The results show that for the slightly anisotropically consolidated samples with consolidation ratios no larger than 1.5, the structure collapses and the deviator strain and pore pressure increase sharply to fail after collapse. For the highly anisotropically consolidated samples with consolidation ratios larger than 1.5, the strain increases steadily to high values, which shows characteristics of ductile failure. 4% is suggested to be the threshold value of deviator stain to determine the occurrence of collapse. The normalized relationship between pore pressure and deviator strain can be correlated by a power fimction for all the anisotropically consolidated samples. Based on it, for the highly anisotropically consolidated samples, the appearance of inflection point on the power function curve is suggested to sign the failure. It can be predicted through the convex pore pressure at this point, whose ratio to the ultimate pore pressure is around linear with the consolidation ratio in spite of the dynamic shear stress level. And the corresponding deviator strain is between 3% and 6%. The strain failure criterion can also be adopted, but the limited value of stain should be determined according to engineering practice. As for the slightly anisotropically consolidated samples, the turning points appear after collapse. So, the failure is suggested to be defined with the occurrence of collapse and the collapse pore pressure can be predicted with the ultimate pore pressure and consolidation ratio.
