For hypersonic air-breathing vehicles,the V-shaped leading edges(VSLEs)of supersonic combustion ramjet(scramjet)inlets experience complex shock interactions and intense aerodynamic loads.This paper provides a comprehe...For hypersonic air-breathing vehicles,the V-shaped leading edges(VSLEs)of supersonic combustion ramjet(scramjet)inlets experience complex shock interactions and intense aerodynamic loads.This paper provides a comprehensive review of flow characteristics at the crotch of VSLEs,with particular focus on the transition of shock interaction types and the variation of wall heat flux under different freestream Mach numbers and geometric configurations.The mechanisms governing shock transition,unsteady oscillations,hysteresis,and three-dimensional effects in VSLE flows are first examined.Subsequently,thermal protection strategies aimed at mitigating extreme heating loads are reviewed,emphasizing their relevance to practical engineering applications.Special attention is given to recent studies addressing thermochemical nonequilibrium effects on VSLE shock interactions,and the limitations of current research are critically assessed.Finally,perspectives for future investigations into hypersonic VSLE shock interactions are outlined,highlighting opportunities for advancing design and thermal management strategies.展开更多
The interactions of oblique/bow shock waves are the key flow phenomena restricting the design and aerothermodynamic performance of high-speed vehicles.Type Ⅲ and Type Ⅳ Shock/Shock Interactions(SSIs)have been extens...The interactions of oblique/bow shock waves are the key flow phenomena restricting the design and aerothermodynamic performance of high-speed vehicles.Type Ⅲ and Type Ⅳ Shock/Shock Interactions(SSIs)have been extensively investigated,as such interactions can induce abnormal aerodynamic heating problems in hypersonic flows of vehicles.The transition process between these two distinct types of shock/shock interactions remains unclear.In the present study,a subclass of shock/shock interaction configuration is revealed and defined as Type Ⅲa.Type Ⅲa interaction can induce much more severe aerodynamic heating than a Type Ⅳ interaction which was ever reported to be the most serious in literature.The intense aerodynamic heating observed in this configuration highlights a new design point for the thermal protection system of hypersonic vehicles.A secondary Mach interaction between shock waves in the supersonic flow path of a Type Ⅲ configuration is demonstrated to be the primary mechanism for such a subclass of shock/shock interaction configuration.展开更多
This paper examines the Shock/Shock Interactions（SSI）between the body and wing of aircraft in supersonic flows.The body is simplified to a flat wedge and the wing is assumed to be a sharp wing.The theoretical spatia...This paper examines the Shock/Shock Interactions（SSI）between the body and wing of aircraft in supersonic flows.The body is simplified to a flat wedge and the wing is assumed to be a sharp wing.The theoretical spatial dimension reduction method,which transforms the 3D problem into a 2D one,is used to analyze the SSI between the body and wing.The temperature and pressure behind the Mach stem induced by the wing and body are obtained,and the wave configurations in the corner are determined.Numerical validations are conducted by solving the inviscid Euler equations in 3D with a Non-oscillatory and Non-free-parameters Dissipative（NND）finite difference scheme.Good agreements between the theoretical and numerical results are obtained.Additionally,the effects of the wedge angle and sweep angle on wave configurations and flow field are considered numerically and theoretically.The influences of wedge angle are significant,whereas the effects of sweep angle on wave configurations are negligible.This paper provides useful information for the design and thermal protection of aircraft in supersonic and hypersonic flows.展开更多
As a multidisciplinary phenomenon,panel aeroelasticity in shock-dominated flow is featured by two primary interactions:Fluid-Structure Interactions(FSIs)and Shock-Boundary Layer Interactions(SBLIs).The former raises s...As a multidisciplinary phenomenon,panel aeroelasticity in shock-dominated flow is featured by two primary interactions:Fluid-Structure Interactions(FSIs)and Shock-Boundary Layer Interactions(SBLIs).The former raises structural concerns,and the latter is of aerodynamic interest.Thus,panel aeroelasticity in shock-dominated flow represents a vital topic for the development and optimization of supersonic vehicles and propulsion systems.This review systematically summarizes recent advances in the methodologies applied to capture structural and fluid dynamics,including theoretical models,numerical simulations,and wind tunnel experiments.The application of data-driven modal decomposition,an advanced technique to extract physically crucial features,on the topic is introduced.From the perspective of FSIs,the distinctive aeroelastic behaviors in shock-dominated flow,including hysteresis phenomena and nonlinear responses,are highlighted.From the perspective of SBLIs,the modifications in their spatial and temporal characteristics imposed by the aeroelastic responses are emphasized.Motivated by the interaction between the shock waves and structural response,different strategies have been proposed to implement aeroelastic suppression and shock control,which have the potential to enhance structural safety and aerodynamic performance in the next generation of high-speed flight vehicles.展开更多
The stability of supersonic inlets faces challenges due to various changes in flight conditions,and flow control methods that address shock wave/boundary layer interactions under only one set of conditions cannot meet...The stability of supersonic inlets faces challenges due to various changes in flight conditions,and flow control methods that address shock wave/boundary layer interactions under only one set of conditions cannot meet developmental requirements.This paper proposes an adaptive bump control scheme and employs dynamic mesh technology for numerical simulation to investigate the unsteady control effects of adaptive bumps.The obtained results indicate that the use of moving bumps to control shock wave/boundary layer interactions is feasible.The adaptive control effects of five different bump speeds are evaluated.Within the range of bump speeds studied,the analysis of the flow field structure reveals the patterns of change in the separation zone area during the control process,as well as the relationship between the bump motion speed and the control effect on the separation zone.It is concluded that the moving bump endows the boundary layer with additional energy.展开更多
Three-dimensional curved shock wave/boundary layer interaction with streamwise and spanwise curvatures widely exists in practical aerodynamic design.To explore the effects of composite shock curvatures on boundary lay...Three-dimensional curved shock wave/boundary layer interaction with streamwise and spanwise curvatures widely exists in practical aerodynamic design.To explore the effects of composite shock curvatures on boundary layer separation,a canonical model with a cone placed above plate was utilized as a reference.Configurations of straight,convex,and concave conical shock waves inducing the curved conical shock wave/boundary layer interactions were studied,using CFD based on Reynolds-averaged numerical simulation method.The flow structure and separation region of each case were discussed quantitively on the symmetry plane,flat plate,and plane perpendicular to flow direction,respectively.The focus of the analysis was on the characteristic patterns of separation scale variation in the streamwise and spanwise directions,which were observed to consistently change with respect to both directions with alterations in the incident shock wave shape.A simplified control volume model was established to qualitatively discuss the influence source of curved shock waves on separation scales,based on mass conservation equations.The results suggest that the curved shock wave has a holistic effect on separation,which is not solely dependent on the shock foot strength.展开更多
Cowl-induced incident Shock Wave/Boundary Layer Interactions (SWBLI) under the influence of gradual expansion waves are frequently observed in supersonic inlets. However, the analysis and prediction of interaction len...Cowl-induced incident Shock Wave/Boundary Layer Interactions (SWBLI) under the influence of gradual expansion waves are frequently observed in supersonic inlets. However, the analysis and prediction of interaction lengths have not been sufficiently investigated. First, this study presents a theoretical scaling analysis and validates it through wind tunnel experiments. It conducts detailed control volume analysis of mass conservation, considering the differences between inviscid and viscous cases. Then, three models for analysing interaction length under gradual expansion waves are derived. Related experiments using schlieren photography are conducted to validate the models in a Mach 2.73 flow. The interaction scales are captured at various relative distances between the shock impingement location and the expansion regions with wedge angles ranging from 12° to 15° and expansion angles of 9°, 12°, and 15°. Three trend lines are plotted based on different expansion angles to depict the relationship between normalised interaction length and normalised interaction strength metric. In addition, the relationship between the coefficients of the trend line and the expansion angles is introduced to predict the interaction length influenced by gradual expansion waves. Finally, the estimation of normalised interaction length is derived for various coefficients within a unified form.展开更多
A shock interaction problem is solved with finite difference methods for a hypersonic fiow of air with chemical reactions. If a body has two concave cornerst a secondary shock is formed in the shock layer and it meets...A shock interaction problem is solved with finite difference methods for a hypersonic fiow of air with chemical reactions. If a body has two concave cornerst a secondary shock is formed in the shock layer and it meets the main shock later.As the two shocks meet, the flow becomes singular at the interaction point, and a new main shock, a contact discontinuity and an expansion wave appear as a result of interaction between the two shocks. Therefore, the problem is very complicated.Using proper combinations of implicit and explicit finite difference schemes according to the property of the equations and the boundary conditions, we compute the fiow behind the interaction point successfully.展开更多
The effect of magnetohydrodynamic(MHD)plasma actuators on the control of hypersonic shock wave/turbulent boundary layer interactions is investigated here using Reynolds-averaged Navier-Stokes calculations with low mag...The effect of magnetohydrodynamic(MHD)plasma actuators on the control of hypersonic shock wave/turbulent boundary layer interactions is investigated here using Reynolds-averaged Navier-Stokes calculations with low magnetic Reynolds number approximation.A Mach 5 oblique shock/turbulent boundary layer interaction was adopted as the basic configuration in this numerical study in order to assess the effects of flow control using different combinations of magnetic field and plasma.Results show that just the thermal effect of plasma under experimental actuator parameters has no significant impact on the flow field and can therefore be neglected.On the basis of the relative position of control area and separation point,MHD control can be divided into four types and so effects and mechanisms might be different.Amongst these,D-type control leads to the largest reduction in separation length using magnetically-accelerated plasma inside an isobaric dead-air region.A novel parameter for predicting the shock wave/turbulent boundary layer interaction control based on Lorentz force acceleration is then proposed and the controllability of MHD plasma actuators under different MHD interaction parameters is studied.The results of this study will be insightful for the further design of MHD control in hypersonic vehicle inlets.展开更多
The interaction length induced by Shock Wave/Turbulent Boundary-Layer Interactions(SWTBLIs)in the hypersonic flow was investigated using a scaling analysis,in which the interaction length normalized by the displacemen...The interaction length induced by Shock Wave/Turbulent Boundary-Layer Interactions(SWTBLIs)in the hypersonic flow was investigated using a scaling analysis,in which the interaction length normalized by the displacement thickness of boundary layer was correlated with a corrected non-dimensional separation criterion across the interaction after accounting for the wall temperature effects.A large number of hypersonic SWTBLIs were compiled to examine the scaling analysis over a wide range of Mach numbers,Reynolds numbers,and wall temperatures.The results indicate that the hypersonic SWTBLIs with low Reynolds numbers collapse on the supersonic SWTBLIs,while the hypersonic cases with high Reynolds numbers show a more rapid growth of the interaction length than that with low Reynolds numbers.Thus,two scaling relationships are identified according to different Reynolds numbers for the hypersonic SWTBLIs.The scaling analysis provides valuable guidelines for engineering prediction of the interaction length,and thus,enriches the knowledge of hypersonic SWTBLIs.展开更多
A novel third-order optimized symmetric weighted essentially non-oscillatory(WENO-OS3)scheme is used to simulate the hypersonic shock wave/boundary layer interactions.Firstly,the scheme is presented with the achieveme...A novel third-order optimized symmetric weighted essentially non-oscillatory(WENO-OS3)scheme is used to simulate the hypersonic shock wave/boundary layer interactions.Firstly,the scheme is presented with the achievement of low dissipation in smooth region and robust shock-capturing capabilities in discontinuities.The Maxwell slip boundary conditions are employed to consider the rarefied effect near the surface.Secondly,several validating tests are given to show the good resolution of the WENO-OS3 scheme and the feasibility of the Maxwell slip boundary conditions.Finally,hypersonic flows around the hollow cylinder truncated flare(HCTF)and the25°/55°sharp double cone are studied.Discussions are made on the characteristics of the hypersonic shock wave/boundary layer interactions with and without the consideration of the slip effect.The results indicate that the scheme has a good capability in predicting heat transfer with a high resolution for describing fluid structures.With the slip boundary conditions,the separation region at the corner is smaller and the prediction is more accurate than that with no-slip boundary conditions.展开更多
This study investigates the three-dimensional(3D)effects introduced by the end walls for an aspect ratio of1 in ramp-induced shock wave boundary layer interactions.The simulations are performed using a symmetry bounda...This study investigates the three-dimensional(3D)effects introduced by the end walls for an aspect ratio of1 in ramp-induced shock wave boundary layer interactions.The simulations are performed using a symmetry boundary condition in the spanwise direction at free-stream Mach numbers in 3D.The simulations are performed using an in-house compressible supersonic solver“Open SBLIFVM”.Two free stream Mach numbers 2.5,and3 are used in the current work,and the simulated results are compared with the aspect ratio 1 simulations by Mangalagiri and Jammy.The inflow is initialized with a similarity solution;its Reynolds number based on the boundary layer thickness is adjusted such that the Reynolds number at the start of the ramp is kept at 3×10^(5)for all simulations.From the results,it is evident that the introduction of sidewalls resulted in a shorter centerline separation length when compared with the two-dimensional(2D)simulations.This contradicts the results at Mach 2 by Mangalgiri and Jammy where the vortex observed at Mach 2 in the central separation region disappeared with increasing free-stream Mach number.Additionally,the topology of interaction shifted from owl-like separation of the second kind to the first kind when the freestream Mach number increased from2 to 2.5.It can be concluded that the interaction topology is crucial to the increase or decrease of the central separation length when compared to 2D simulations.展开更多
The interaction of shock waves is investigated for the following nonstrictly hyperbolic system: [GRAPHICS] The interaction of shock waves is complicated, with new types of shock waves, and new singula rities in the de...The interaction of shock waves is investigated for the following nonstrictly hyperbolic system: [GRAPHICS] The interaction of shock waves is complicated, with new types of shock waves, and new singula rities in the dependence of interaction on the relative positions of the three states separated by shock waves. Several ideas are introduced to helo organize and clarify the new phenomena.展开更多
This paper presents briefly the recent progress on study of swept shock wave/boundary layer interactions with emphasis on application of zonal analysis and correlation analysis to them. Based on the zonal analysis an ...This paper presents briefly the recent progress on study of swept shock wave/boundary layer interactions with emphasis on application of zonal analysis and correlation analysis to them. Based on the zonal analysis an overall framework of complicated interaction flow structure including both surface flowfield and space flowfield is discussed. Based on correlation analysis the conical interactions induced by four families of shock wave generators have been discussed in detail. Some control parameter and physical mechanism of conical interaction have been revealed. Finally some aspects of the problem and the prospects for future work are suggested.展开更多
The phenomenon of shock/shock interaction(SSI)is widely observed in high-speed flow,and the double wedge SSI represents one of the typical problems encountered.The control effect of single-pulse plasma synthetic jet(P...The phenomenon of shock/shock interaction(SSI)is widely observed in high-speed flow,and the double wedge SSI represents one of the typical problems encountered.The control effect of single-pulse plasma synthetic jet(PSJ)on double wedge type-Ⅵand type-ⅤSSI was investigated experimentally and numerically,and the influence of discharge energy was also explored.The findings indicate that the interaction between PSJ and the high-speed freestream results in the formation of a plasma layer and a jet shock,which collectively governs the control of SSI.The control mechanism of single-pulse PSJ on SSI lies in its capacity to attenuate both shock and SSI.For type-ⅥSSI,the original second-wedge oblique shock is eliminated under the control of PSJ,resulting in a new type-ⅥSSI formed by the jet shock and the first-wedge oblique shock.For type-ⅤSSI,the presence of PSJ effectively mitigates the intensity of Mach stem,supersonic jet,and reflected shocks,thereby facilitating its transition into type-ⅥSSI.The numerical results indicate that the peak pressure can be reduced by approximately 32.26%at maximum.Furthermore,the development of PSJ also extends in the Z direction.The pressure decreases in the area affected by both PSJ and jet shock due to the attenuation of the SSI zone.With increasing discharge energy,the control effect of PSJ on SSI is gradually enhanced.展开更多
A Discrete Boltzmann Method(DBM)with a Maxwell-type boundary condition is constructed to investigate the influence of rarefaction on laminar Shock Wave/Boundary Layer Interaction(SWBLI).Due to the complexity of compre...A Discrete Boltzmann Method(DBM)with a Maxwell-type boundary condition is constructed to investigate the influence of rarefaction on laminar Shock Wave/Boundary Layer Interaction(SWBLI).Due to the complexity of compressible flow,a Knudsen number vector Kn,whose components include the local Knudsen numbers such as Kn_(ρ)and Kn_(U),is introduced to characterize the local structures,where Kn_(ρ)and Kn_(U)are Knudsen numbers defined in terms of the density and velocity interfaces,respectively.Since first focusing on the steady state of SWBLI,the DBM considers up to the second-order Kn_(ρ)(rarefaction/non-equilibrium)effects.The model is validated using Mach number 2 SWBLI and the necessity of using DBM with sufficient physical accuracy is confirmed by the shock collision problem.Key findings include the following:the leading-edge shock wave increases the local density Knudsen number Kn_(ρ)and eventually leads to the failure of linear constitutive relations in the Navier-Stokes(N-S)model and surely also in the lower-order DBM;the non-equilibrium effect differences in regions behind the leading-edge shock wave are primarily correlated with Kn_(ρ),while in the separation region are primarily correlated with Kn_(U);the non-equilibrium quantities D_(2)and D_(4,2),as well as the viscous entropy production rate S_(NOMF)can be used to identify the separation zone.The findings clarify various effects and main mechanisms in different regions associated with SWBLI,which are concealed in N-S model.展开更多
A two-dimensional Reynolds-averaged Navier-Stokes solver is applied to analyze the aerodynamic behavior of the Shock/Boundary-Layer interaction of rocket with a boosted The K-ε turbulence model and a finite volume m...A two-dimensional Reynolds-averaged Navier-Stokes solver is applied to analyze the aerodynamic behavior of the Shock/Boundary-Layer interaction of rocket with a boosted The K-ε turbulence model and a finite volume method in a unstructured body-fitted curvilinear coordinates have been used. The results indicate that the separation and the reattachment occur in the Boundary-Layer of the main rocket because of the shock interaction. The shape of the booster nose effects the flow field obviously. In the case of the hemisphere booster nose the pressure has complicate distributions and the separation is very clear. The distance between the booster and main rocket has the evident effect on the flow field. If the distance is smaller the pressure coefficient is bigger the separation zone even the separation bubble occurs.展开更多
In this paper, we study the vanishing viscosity limit for non-isentropic gas dy- namics with interacting shocks. Given any entropy solution of non-isentropic gas dynamics which consists of two different families of sh...In this paper, we study the vanishing viscosity limit for non-isentropic gas dy- namics with interacting shocks. Given any entropy solution of non-isentropic gas dynamics which consists of two different families of shocks interacting at some positive time, we show that such solution is the vanishing viscosity limit of a family of smooth global solutions for a viscous system of conservation law. We remark that, after the interacting time, not only shocks but also contact discontinuity are generated.展开更多
Three Plasma Synthetic Jet Actuators(PSJA)under the high-frequency actuation are used to control the Shock Wave Boundary Layer Interaction(SWBLI),a high-speed schlieren image processing method based on spatial Fourier...Three Plasma Synthetic Jet Actuators(PSJA)under the high-frequency actuation are used to control the Shock Wave Boundary Layer Interaction(SWBLI),a high-speed schlieren image processing method based on spatial Fourier transform as well as snapshot proper orthogonal decomposition were used to study the control effect of high-frequency plasma synthetic jet on lowfrequency unsteadiness of SWBLI.The analysis of the base flow shows that the separated shock wave actually has both large-and small-amplitude vibrations at low frequency.And the results revealed that the PSJA with an operating frequency of 2 k Hz has the ability to reduce the energy of low-frequency component of shock wave motion,indicating that the 2 k Hz actuation can effectively suppress low-frequency unsteadiness of the separated wave.Compared with the actuation frequency of 2 k Hz,the energy of low-frequency component of the shock wave is enhanced under the8 k Hz actuation,which aggravates the low-frequency unsteady motion of the shock wave.It is likely that the actuation frequency is too high,thus the intensity of the precursor shock wave induced by PSJA becomes weaker.Additionally,as the 4 k Hz actuation is applied,the pulsation of the separation region was enhanced,it is speculated that the actuation frequency is coupled with the oscillation frequency of the separation region.展开更多
An experimental study was conducted on shock wave turbulent boundary layer interactions caused by a blunt swept fin-plate configuration at Mach numbers of 5.0, 7.8, 9.9 for a Reynolds number range of (1.0.similar to 4...An experimental study was conducted on shock wave turbulent boundary layer interactions caused by a blunt swept fin-plate configuration at Mach numbers of 5.0, 7.8, 9.9 for a Reynolds number range of (1.0.similar to 4.7) x 10(7)/m. Detailed heat transfer and pressure distributions were measured at fin deflection angles of up to 30 degrees for a sweepback angle of 67.6 degrees. Surface oil flow patterns and liquid crystal thermograms as well as schlieren pictures of fin shock shape were taken. The study shows that the flow was separated at deflection of 10 degrees and secondary separation were detected at deflection of theta greater than or equal to 20 degrees. The heat transfer and pressure distributions on flat plate showed an extensive plateau region followed by a distinct dip and local peak close to the fin foot. Measurements of the plateau pressure and heat transfer were in good agreement with existing prediction methods, but pressure and heating peak measurements at M greater than or equal to 6 were significantly lower than predicted by the simple prediction techniques at lower Mach numbers.展开更多
基金funded by the Research Fund of National Key Laboratory of Aerospace Physics in Fluids,grant number 2024-APF-KFZD-01Guangdong Basic and Applied Basic Research Foundation,grant number 2025A1515012081+1 种基金National Natural Science Foundation of China,grant number 12002193Shandong Provincial Natural Science Foundation,China,grant number ZR2019QA018.
文摘For hypersonic air-breathing vehicles,the V-shaped leading edges(VSLEs)of supersonic combustion ramjet(scramjet)inlets experience complex shock interactions and intense aerodynamic loads.This paper provides a comprehensive review of flow characteristics at the crotch of VSLEs,with particular focus on the transition of shock interaction types and the variation of wall heat flux under different freestream Mach numbers and geometric configurations.The mechanisms governing shock transition,unsteady oscillations,hysteresis,and three-dimensional effects in VSLE flows are first examined.Subsequently,thermal protection strategies aimed at mitigating extreme heating loads are reviewed,emphasizing their relevance to practical engineering applications.Special attention is given to recent studies addressing thermochemical nonequilibrium effects on VSLE shock interactions,and the limitations of current research are critically assessed.Finally,perspectives for future investigations into hypersonic VSLE shock interactions are outlined,highlighting opportunities for advancing design and thermal management strategies.
基金co-supported by the National Key Research and Development Plan of China(No.2019YFA0405204)the National Natural Science Foundation of China(Nos.12172365,12072353 and 12132017)。
文摘The interactions of oblique/bow shock waves are the key flow phenomena restricting the design and aerothermodynamic performance of high-speed vehicles.Type Ⅲ and Type Ⅳ Shock/Shock Interactions(SSIs)have been extensively investigated,as such interactions can induce abnormal aerodynamic heating problems in hypersonic flows of vehicles.The transition process between these two distinct types of shock/shock interactions remains unclear.In the present study,a subclass of shock/shock interaction configuration is revealed and defined as Type Ⅲa.Type Ⅲa interaction can induce much more severe aerodynamic heating than a Type Ⅳ interaction which was ever reported to be the most serious in literature.The intense aerodynamic heating observed in this configuration highlights a new design point for the thermal protection system of hypersonic vehicles.A secondary Mach interaction between shock waves in the supersonic flow path of a Type Ⅲ configuration is demonstrated to be the primary mechanism for such a subclass of shock/shock interaction configuration.
基金supported by the Fundamental Research Funds for the Central Universities of China (No. 31020170QD087)
文摘This paper examines the Shock/Shock Interactions（SSI）between the body and wing of aircraft in supersonic flows.The body is simplified to a flat wedge and the wing is assumed to be a sharp wing.The theoretical spatial dimension reduction method,which transforms the 3D problem into a 2D one,is used to analyze the SSI between the body and wing.The temperature and pressure behind the Mach stem induced by the wing and body are obtained,and the wave configurations in the corner are determined.Numerical validations are conducted by solving the inviscid Euler equations in 3D with a Non-oscillatory and Non-free-parameters Dissipative（NND）finite difference scheme.Good agreements between the theoretical and numerical results are obtained.Additionally,the effects of the wedge angle and sweep angle on wave configurations and flow field are considered numerically and theoretically.The influences of wedge angle are significant,whereas the effects of sweep angle on wave configurations are negligible.This paper provides useful information for the design and thermal protection of aircraft in supersonic and hypersonic flows.
基金supported by the National Natural Science Foundation of China(No.12372233)the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University,China(No.25GH01020005)the“111 Project”of China(No.B17037)。
文摘As a multidisciplinary phenomenon,panel aeroelasticity in shock-dominated flow is featured by two primary interactions:Fluid-Structure Interactions(FSIs)and Shock-Boundary Layer Interactions(SBLIs).The former raises structural concerns,and the latter is of aerodynamic interest.Thus,panel aeroelasticity in shock-dominated flow represents a vital topic for the development and optimization of supersonic vehicles and propulsion systems.This review systematically summarizes recent advances in the methodologies applied to capture structural and fluid dynamics,including theoretical models,numerical simulations,and wind tunnel experiments.The application of data-driven modal decomposition,an advanced technique to extract physically crucial features,on the topic is introduced.From the perspective of FSIs,the distinctive aeroelastic behaviors in shock-dominated flow,including hysteresis phenomena and nonlinear responses,are highlighted.From the perspective of SBLIs,the modifications in their spatial and temporal characteristics imposed by the aeroelastic responses are emphasized.Motivated by the interaction between the shock waves and structural response,different strategies have been proposed to implement aeroelastic suppression and shock control,which have the potential to enhance structural safety and aerodynamic performance in the next generation of high-speed flight vehicles.
基金supported by the National Key R&D Program of China(Grant No.2019YFA0405300)the National Natural Science Foundation of China(Grant No.11972368)the Natural Science Foundation of Hunan Province(Grant No.2021JJ10045).
文摘The stability of supersonic inlets faces challenges due to various changes in flight conditions,and flow control methods that address shock wave/boundary layer interactions under only one set of conditions cannot meet developmental requirements.This paper proposes an adaptive bump control scheme and employs dynamic mesh technology for numerical simulation to investigate the unsteady control effects of adaptive bumps.The obtained results indicate that the use of moving bumps to control shock wave/boundary layer interactions is feasible.The adaptive control effects of five different bump speeds are evaluated.Within the range of bump speeds studied,the analysis of the flow field structure reveals the patterns of change in the separation zone area during the control process,as well as the relationship between the bump motion speed and the control effect on the separation zone.It is concluded that the moving bump endows the boundary layer with additional energy.
基金the support of the National Natural Science Foundation of China(Nos.12372295,U21B6003,U20A2069,12302389 and 123B2037)。
文摘Three-dimensional curved shock wave/boundary layer interaction with streamwise and spanwise curvatures widely exists in practical aerodynamic design.To explore the effects of composite shock curvatures on boundary layer separation,a canonical model with a cone placed above plate was utilized as a reference.Configurations of straight,convex,and concave conical shock waves inducing the curved conical shock wave/boundary layer interactions were studied,using CFD based on Reynolds-averaged numerical simulation method.The flow structure and separation region of each case were discussed quantitively on the symmetry plane,flat plate,and plane perpendicular to flow direction,respectively.The focus of the analysis was on the characteristic patterns of separation scale variation in the streamwise and spanwise directions,which were observed to consistently change with respect to both directions with alterations in the incident shock wave shape.A simplified control volume model was established to qualitatively discuss the influence source of curved shock waves on separation scales,based on mass conservation equations.The results suggest that the curved shock wave has a holistic effect on separation,which is not solely dependent on the shock foot strength.
基金co-supported by the National Natural Science Foundation of China (No. 12172175)the National Science and Technology Major Project, China (No. J2019-II0014-0035)the Science Center for Gas Turbine Project, China (Nos. P2022-C-II-002-001, P2022-A-II-002-001)
文摘Cowl-induced incident Shock Wave/Boundary Layer Interactions (SWBLI) under the influence of gradual expansion waves are frequently observed in supersonic inlets. However, the analysis and prediction of interaction lengths have not been sufficiently investigated. First, this study presents a theoretical scaling analysis and validates it through wind tunnel experiments. It conducts detailed control volume analysis of mass conservation, considering the differences between inviscid and viscous cases. Then, three models for analysing interaction length under gradual expansion waves are derived. Related experiments using schlieren photography are conducted to validate the models in a Mach 2.73 flow. The interaction scales are captured at various relative distances between the shock impingement location and the expansion regions with wedge angles ranging from 12° to 15° and expansion angles of 9°, 12°, and 15°. Three trend lines are plotted based on different expansion angles to depict the relationship between normalised interaction length and normalised interaction strength metric. In addition, the relationship between the coefficients of the trend line and the expansion angles is introduced to predict the interaction length influenced by gradual expansion waves. Finally, the estimation of normalised interaction length is derived for various coefficients within a unified form.
文摘A shock interaction problem is solved with finite difference methods for a hypersonic fiow of air with chemical reactions. If a body has two concave cornerst a secondary shock is formed in the shock layer and it meets the main shock later.As the two shocks meet, the flow becomes singular at the interaction point, and a new main shock, a contact discontinuity and an expansion wave appear as a result of interaction between the two shocks. Therefore, the problem is very complicated.Using proper combinations of implicit and explicit finite difference schemes according to the property of the equations and the boundary conditions, we compute the fiow behind the interaction point successfully.
基金Project supported by the National Key R&D Program of China(Nos.2019YFA0405300 and 2019YFA0405203)the Chinese Scholarship Council(CSC)(No.201903170195)。
文摘The effect of magnetohydrodynamic(MHD)plasma actuators on the control of hypersonic shock wave/turbulent boundary layer interactions is investigated here using Reynolds-averaged Navier-Stokes calculations with low magnetic Reynolds number approximation.A Mach 5 oblique shock/turbulent boundary layer interaction was adopted as the basic configuration in this numerical study in order to assess the effects of flow control using different combinations of magnetic field and plasma.Results show that just the thermal effect of plasma under experimental actuator parameters has no significant impact on the flow field and can therefore be neglected.On the basis of the relative position of control area and separation point,MHD control can be divided into four types and so effects and mechanisms might be different.Amongst these,D-type control leads to the largest reduction in separation length using magnetically-accelerated plasma inside an isobaric dead-air region.A novel parameter for predicting the shock wave/turbulent boundary layer interaction control based on Lorentz force acceleration is then proposed and the controllability of MHD plasma actuators under different MHD interaction parameters is studied.The results of this study will be insightful for the further design of MHD control in hypersonic vehicle inlets.
基金supported by the National Natural Science Foundation of China(Nos.11772325 and 11621202)。
文摘The interaction length induced by Shock Wave/Turbulent Boundary-Layer Interactions(SWTBLIs)in the hypersonic flow was investigated using a scaling analysis,in which the interaction length normalized by the displacement thickness of boundary layer was correlated with a corrected non-dimensional separation criterion across the interaction after accounting for the wall temperature effects.A large number of hypersonic SWTBLIs were compiled to examine the scaling analysis over a wide range of Mach numbers,Reynolds numbers,and wall temperatures.The results indicate that the hypersonic SWTBLIs with low Reynolds numbers collapse on the supersonic SWTBLIs,while the hypersonic cases with high Reynolds numbers show a more rapid growth of the interaction length than that with low Reynolds numbers.Thus,two scaling relationships are identified according to different Reynolds numbers for the hypersonic SWTBLIs.The scaling analysis provides valuable guidelines for engineering prediction of the interaction length,and thus,enriches the knowledge of hypersonic SWTBLIs.
基金supported by the National Key Basic Research and Development Program (No.2014CB744100)
文摘A novel third-order optimized symmetric weighted essentially non-oscillatory(WENO-OS3)scheme is used to simulate the hypersonic shock wave/boundary layer interactions.Firstly,the scheme is presented with the achievement of low dissipation in smooth region and robust shock-capturing capabilities in discontinuities.The Maxwell slip boundary conditions are employed to consider the rarefied effect near the surface.Secondly,several validating tests are given to show the good resolution of the WENO-OS3 scheme and the feasibility of the Maxwell slip boundary conditions.Finally,hypersonic flows around the hollow cylinder truncated flare(HCTF)and the25°/55°sharp double cone are studied.Discussions are made on the characteristics of the hypersonic shock wave/boundary layer interactions with and without the consideration of the slip effect.The results indicate that the scheme has a good capability in predicting heat transfer with a high resolution for describing fluid structures.With the slip boundary conditions,the separation region at the corner is smaller and the prediction is more accurate than that with no-slip boundary conditions.
基金sponsored by the Department of Science and Technology,Science and Engineering Research Board(SERB),Core Research(Grant No.CRG/2020/03859)。
文摘This study investigates the three-dimensional(3D)effects introduced by the end walls for an aspect ratio of1 in ramp-induced shock wave boundary layer interactions.The simulations are performed using a symmetry boundary condition in the spanwise direction at free-stream Mach numbers in 3D.The simulations are performed using an in-house compressible supersonic solver“Open SBLIFVM”.Two free stream Mach numbers 2.5,and3 are used in the current work,and the simulated results are compared with the aspect ratio 1 simulations by Mangalagiri and Jammy.The inflow is initialized with a similarity solution;its Reynolds number based on the boundary layer thickness is adjusted such that the Reynolds number at the start of the ramp is kept at 3×10^(5)for all simulations.From the results,it is evident that the introduction of sidewalls resulted in a shorter centerline separation length when compared with the two-dimensional(2D)simulations.This contradicts the results at Mach 2 by Mangalgiri and Jammy where the vortex observed at Mach 2 in the central separation region disappeared with increasing free-stream Mach number.Additionally,the topology of interaction shifted from owl-like separation of the second kind to the first kind when the freestream Mach number increased from2 to 2.5.It can be concluded that the interaction topology is crucial to the increase or decrease of the central separation length when compared to 2D simulations.
文摘The interaction of shock waves is investigated for the following nonstrictly hyperbolic system: [GRAPHICS] The interaction of shock waves is complicated, with new types of shock waves, and new singula rities in the dependence of interaction on the relative positions of the three states separated by shock waves. Several ideas are introduced to helo organize and clarify the new phenomena.
文摘This paper presents briefly the recent progress on study of swept shock wave/boundary layer interactions with emphasis on application of zonal analysis and correlation analysis to them. Based on the zonal analysis an overall framework of complicated interaction flow structure including both surface flowfield and space flowfield is discussed. Based on correlation analysis the conical interactions induced by four families of shock wave generators have been discussed in detail. Some control parameter and physical mechanism of conical interaction have been revealed. Finally some aspects of the problem and the prospects for future work are suggested.
基金supported by the Independent Innovation Science Fund of National University of Defense Technology(No.24-ZZCX-BC-05)National Natural Science Foundation of China(Nos.92271110 and 12202488)+2 种基金the Major National Science and Technology Project(No.J2019-Ⅲ0010-0054)the National Postdoctoral Researcher Program of China(No.GZB20230985)the Natural Science Program of National University of Defense Technology(No.ZK22-30)。
文摘The phenomenon of shock/shock interaction(SSI)is widely observed in high-speed flow,and the double wedge SSI represents one of the typical problems encountered.The control effect of single-pulse plasma synthetic jet(PSJ)on double wedge type-Ⅵand type-ⅤSSI was investigated experimentally and numerically,and the influence of discharge energy was also explored.The findings indicate that the interaction between PSJ and the high-speed freestream results in the formation of a plasma layer and a jet shock,which collectively governs the control of SSI.The control mechanism of single-pulse PSJ on SSI lies in its capacity to attenuate both shock and SSI.For type-ⅥSSI,the original second-wedge oblique shock is eliminated under the control of PSJ,resulting in a new type-ⅥSSI formed by the jet shock and the first-wedge oblique shock.For type-ⅤSSI,the presence of PSJ effectively mitigates the intensity of Mach stem,supersonic jet,and reflected shocks,thereby facilitating its transition into type-ⅥSSI.The numerical results indicate that the peak pressure can be reduced by approximately 32.26%at maximum.Furthermore,the development of PSJ also extends in the Z direction.The pressure decreases in the area affected by both PSJ and jet shock due to the attenuation of the SSI zone.With increasing discharge energy,the control effect of PSJ on SSI is gradually enhanced.
基金support from the National Key R&D Program of China(No.2020YFC2201100)the Foundation of National Key Laboratory of Shock Wave and Detonation Physics,China(No.JCKYS2023212003)+1 种基金the National Natural Science Foundation of China(No.12172061)the Opening Project of State Key Laboratory of Explosion Science and Safety Protection(Beijing Institute of Technology)(No.KFJJ25-02M).
文摘A Discrete Boltzmann Method(DBM)with a Maxwell-type boundary condition is constructed to investigate the influence of rarefaction on laminar Shock Wave/Boundary Layer Interaction(SWBLI).Due to the complexity of compressible flow,a Knudsen number vector Kn,whose components include the local Knudsen numbers such as Kn_(ρ)and Kn_(U),is introduced to characterize the local structures,where Kn_(ρ)and Kn_(U)are Knudsen numbers defined in terms of the density and velocity interfaces,respectively.Since first focusing on the steady state of SWBLI,the DBM considers up to the second-order Kn_(ρ)(rarefaction/non-equilibrium)effects.The model is validated using Mach number 2 SWBLI and the necessity of using DBM with sufficient physical accuracy is confirmed by the shock collision problem.Key findings include the following:the leading-edge shock wave increases the local density Knudsen number Kn_(ρ)and eventually leads to the failure of linear constitutive relations in the Navier-Stokes(N-S)model and surely also in the lower-order DBM;the non-equilibrium effect differences in regions behind the leading-edge shock wave are primarily correlated with Kn_(ρ),while in the separation region are primarily correlated with Kn_(U);the non-equilibrium quantities D_(2)and D_(4,2),as well as the viscous entropy production rate S_(NOMF)can be used to identify the separation zone.The findings clarify various effects and main mechanisms in different regions associated with SWBLI,which are concealed in N-S model.
文摘A two-dimensional Reynolds-averaged Navier-Stokes solver is applied to analyze the aerodynamic behavior of the Shock/Boundary-Layer interaction of rocket with a boosted The K-ε turbulence model and a finite volume method in a unstructured body-fitted curvilinear coordinates have been used. The results indicate that the separation and the reattachment occur in the Boundary-Layer of the main rocket because of the shock interaction. The shape of the booster nose effects the flow field obviously. In the case of the hemisphere booster nose the pressure has complicate distributions and the separation is very clear. The distance between the booster and main rocket has the evident effect on the flow field. If the distance is smaller the pressure coefficient is bigger the separation zone even the separation bubble occurs.
基金Xiaoding Shi was supported by National Natural Sciences Foundation of China(11471321)Yan Yong was supported by National Natural Sciences Foundation of China(11201301)
文摘In this paper, we study the vanishing viscosity limit for non-isentropic gas dy- namics with interacting shocks. Given any entropy solution of non-isentropic gas dynamics which consists of two different families of shocks interacting at some positive time, we show that such solution is the vanishing viscosity limit of a family of smooth global solutions for a viscous system of conservation law. We remark that, after the interacting time, not only shocks but also contact discontinuity are generated.
基金supported by the National Key R&D Program of China(No.2019YFA0405300)the National Natural Science Foundation of China(Nos.51907205 and 12002363)the Foundation Strengthening Fund,China(Nos.2019077 and 2019-053)。
文摘Three Plasma Synthetic Jet Actuators(PSJA)under the high-frequency actuation are used to control the Shock Wave Boundary Layer Interaction(SWBLI),a high-speed schlieren image processing method based on spatial Fourier transform as well as snapshot proper orthogonal decomposition were used to study the control effect of high-frequency plasma synthetic jet on lowfrequency unsteadiness of SWBLI.The analysis of the base flow shows that the separated shock wave actually has both large-and small-amplitude vibrations at low frequency.And the results revealed that the PSJA with an operating frequency of 2 k Hz has the ability to reduce the energy of low-frequency component of shock wave motion,indicating that the 2 k Hz actuation can effectively suppress low-frequency unsteadiness of the separated wave.Compared with the actuation frequency of 2 k Hz,the energy of low-frequency component of the shock wave is enhanced under the8 k Hz actuation,which aggravates the low-frequency unsteady motion of the shock wave.It is likely that the actuation frequency is too high,thus the intensity of the precursor shock wave induced by PSJA becomes weaker.Additionally,as the 4 k Hz actuation is applied,the pulsation of the separation region was enhanced,it is speculated that the actuation frequency is coupled with the oscillation frequency of the separation region.
基金The project supported by China Academy of Launch Vehicle Technology
文摘An experimental study was conducted on shock wave turbulent boundary layer interactions caused by a blunt swept fin-plate configuration at Mach numbers of 5.0, 7.8, 9.9 for a Reynolds number range of (1.0.similar to 4.7) x 10(7)/m. Detailed heat transfer and pressure distributions were measured at fin deflection angles of up to 30 degrees for a sweepback angle of 67.6 degrees. Surface oil flow patterns and liquid crystal thermograms as well as schlieren pictures of fin shock shape were taken. The study shows that the flow was separated at deflection of 10 degrees and secondary separation were detected at deflection of theta greater than or equal to 20 degrees. The heat transfer and pressure distributions on flat plate showed an extensive plateau region followed by a distinct dip and local peak close to the fin foot. Measurements of the plateau pressure and heat transfer were in good agreement with existing prediction methods, but pressure and heating peak measurements at M greater than or equal to 6 were significantly lower than predicted by the simple prediction techniques at lower Mach numbers.
