As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of ai...As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of aircraft structures. The assessment of electromagnetic SE for Slotted Composite Structures(SCSs) is particularly challenging due to their complex geometries and there remains a lack of suitable models for accurately predicting the SE performance of these intricate configurations. To address this issue, this paper introduces SCS-Net, a Deep Neural Network (DNN) method designed to accurately predict the SE of SCS. This method considers the impacts of various structural parameters, material properties and incident wave parameters on the SE of SCSs. In order to better model the SCS, an improved Nicolson-Ross-Weir (NRW) method is introduced in this paper to provide an equivalent flat structure for the SCS and to calculate the electromagnetic parameters of the equivalent structure. Additionally, the prediction of SE via DNNs is limited by insufficient test data, which hinders support for large-sample training. To address the issue of limited measured data, this paper develops a Measurement-Computation Fusion (MCF) dataset construction method. The predictions based on the simulation results show that the proposed method maintains an error of less than 0.07 dB within the 8–10 GHz frequency range. Furthermore, a new loss function based on the weighted L1-norm is established to improve the prediction accuracy for these parameters. Compared with traditional loss functions, the new loss function reduces the maximum prediction error for equivalent electromagnetic parameters by 47%. This method significantly improves the prediction accuracy of SCS-Net for measured data, with a maximum improvement of 23.88%. These findings demonstrate that the proposed method enables precise SE prediction and design for composite structures while reducing the number of test samples needed.展开更多
The impact of Y content on the microstructure,mechanical properties,and electromagnetic interference shielding effectiveness(EMI SE)of the Mg-6Zn-xY-1La-0.5Zr alloy was investigated.After the extrusion treatment of Mg...The impact of Y content on the microstructure,mechanical properties,and electromagnetic interference shielding effectiveness(EMI SE)of the Mg-6Zn-xY-1La-0.5Zr alloy was investigated.After the extrusion treatment of Mg-6Zn-xY-1La-0.5Zr alloy,the large grains that did not experience dynamic recrystallization were elongated along the extrusion direction,and the small-sized dynamic recrystallized grains were distributed around the large grains.The Mg-6Zn-1Y-1La-0.5Zr alloy demonstrated a favorable balance between strength and plasticity,exhibiting ultimate tensile strength,yield strength,and elongation values of 332.3 MPa,267.3 MPa,and 16.2%,respectively.Moreover,the EMI SE within the frequency range of 30-1500 MHz changes from 79 to 110 dB,aligning with the electromagnetic shielding requirements of many high-strength applications.展开更多
In order to prepare the shielding fabrics with high efficiency of power frequency(PF)shielding and excellent electrical conductivity,different ratios of aramid/stainless steel fiber blended yarns were used to weave th...In order to prepare the shielding fabrics with high efficiency of power frequency(PF)shielding and excellent electrical conductivity,different ratios of aramid/stainless steel fiber blended yarns were used to weave the shielding fabrics with different specifications.The fabric structure,fabric areal density,number of fabric layers,embedding ratio of copper-clad wires wrapped aramid yarns(denoted as CCWWA)and embedding direction were designed,and a total of 34 different types of shielding fabrics were woven for testing.The experiments were mainly conducted to study the influence mechanism of various factors on the PF shielding effectiveness by testing the electrical conductivity and PF shielding effectiveness of the fabrics.The research results indicate that the PF shielding effectiveness improves with increasing fabric areal density and metal fiber content.The fabrics embedded with CCWWA,particularly those with bidirectional embedding,exhibit a significant enhancement in the PF shielding effectiveness,showing an increase of 8-20 dB compared to the fabrics without CCWWA.The PF shielding effectiveness varies across different fabric structures,with plain weave fabrics demonstrating the superior PF shielding effectiveness due to their compact structure.Non-conductive base fabric has minimal impact on the PF shielding effectiveness.As the number of fabric layers increases,the PF shielding effectiveness initially improves but then declines,peaking with double-layer fabrics.展开更多
Microstructure, electrical conductivity, and electromagnetic interference(EMI) shielding effectiveness(SE) of cast Mg-x Zn-y Y(x = 2–5, y = 1–10) alloys were systematically investigated to understand the effects of ...Microstructure, electrical conductivity, and electromagnetic interference(EMI) shielding effectiveness(SE) of cast Mg-x Zn-y Y(x = 2–5, y = 1–10) alloys were systematically investigated to understand the effects of Zn and Y additions on electrical conductivity and electromagnetic shielding effectiveness of the alloys.Experimental results indicate that the electrical conductivity and SE of the Mg-x Zn-y Y alloys decrease with Y/Zn ratio. Electrical conductivity is the main factor that affects the electromagnetic shielding properties and the variation tendency of electromagnetic shielding properties of the Mg-x Zn-y Y alloys is consistent with conductivity. Valence of Y and Zn atoms, configuration of extranuclear electron and volumetric difference are main reasons for the variations in the electrical conductivity. A high density of second phase and the formation of semi-continuous network structure can also improve the SE value at high frequencies.展开更多
Ni-P and Ni-P-La alloy coatings were prepared by electroplating. Electromagnetic shielding effectiveness under the different components of rare earth or the different operating conditions was tested by the network ana...Ni-P and Ni-P-La alloy coatings were prepared by electroplating. Electromagnetic shielding effectiveness under the different components of rare earth or the different operating conditions was tested by the network analyzer. The results show that electromagnetic shielding effectiveness of Ni-P-La alloy coating varies from 45 dB to 70 dB with the variety of the frequency from 10 MHz to 350 MHz. Corrosion of the salt fog impacts on the electromagnetic shielding effectiveness a little. A small amount of rare earth added to plating bath can not only enhance corrosion resistance of coating, but make electromagnetic shielding effectiveness increase by 1 ~ 5 dB.展开更多
In this article, hybrid fillers with different dimensions, namely, 2-dimensional（2-D） expanded graphite（EG） and 1-dimensional（1-D） multi-walled carbon nanotubes（CNTs）, were added to aromatic nylon MXD6 matrix ...In this article, hybrid fillers with different dimensions, namely, 2-dimensional（2-D） expanded graphite（EG） and 1-dimensional（1-D） multi-walled carbon nanotubes（CNTs）, were added to aromatic nylon MXD6 matrix via melt-blending, to enhance its thermal and electrical conductivity as well as electromagnetic interference shielding effectiveness（EMI SE）. For ternary composites of MXD6/EG/CNTs, the electrical conductivity reaches up nine orders of magnitude higher compared to that of the neat MXD6 sample, which turned the polymer-based composites from an insulator to a conductor, and the thermal conductivity has been enhanced by 477% compared with that of neat MXD6 sample. Meanwhile, the EMI SE of ternary composite reaches ~50 d B at the overall filler loading of only 18 wt%. This work can provide guidance for the preparation of polymer composites with excellent thermal and electrical conductivity via using hybrid filler.展开更多
The cavity-mode resonance effect could result in significant degradation of the shielding effectiveness （SE） of a shielding enclosure around its resonance frequencies. In this paper, the influence of coated wall los...The cavity-mode resonance effect could result in significant degradation of the shielding effectiveness （SE） of a shielding enclosure around its resonance frequencies. In this paper, the influence of coated wall loss on the suppression of the resonance effect is investigated. For this purpose, an equivalent circuit model is employed to analyze the SE of an apertured rectangular cavity coated with an inside layer of resistive material. The model is developed by extending Robinson＇s equivalent circuit model through incorporating the effect of the wall loss into both the propagation constant and the characteristic impedance of the waveguide. Calculation results show that the wall loss could lead to great improvement on the SE for frequencies near the resonance but almost no effect on the SE for frequencies far away from the resonance.展开更多
The microstructure,electrical conductivity and electromagnetic interference shielding effectiveness of Mg-X(X=Al,Sn,Y and Gd)alloys in as-cast and solution states were systematically investigated in this study.The ele...The microstructure,electrical conductivity and electromagnetic interference shielding effectiveness of Mg-X(X=Al,Sn,Y and Gd)alloys in as-cast and solution states were systematically investigated in this study.The electrical conductivity and electromagnetic shielding capacity of binary magnesium alloys decrease linearly with alloying element content.The electromagnetic shielding effectiveness of the binary magnesium alloys with the same alloying element content is as follows:Mg-Gd<Mg-Sn<Mg-Y<Mg-Al.The main reason for the differences in electromagnetic interference shielding of the binary magnesium alloys is the change in conductivity,which is mainly affected by volumetric difference of solute atoms and magnesium atoms,solute atomic valence and configuration of extranuclear electron.展开更多
Shielding effect and emission criterion of a screw dislocation near an interracial blunt crack are dealt with in this paper. Utilizing the conformal mapping technique, the closed-form solutions are derived for complex...Shielding effect and emission criterion of a screw dislocation near an interracial blunt crack are dealt with in this paper. Utilizing the conformal mapping technique, the closed-form solutions are derived for complex potentials and stress fields due to a screw dislocation located near the interracial blunt crack. The stress intensity factor on the crack tips and the critical stress intensity factor for dislocation emission are also calculated. The influence of the orientation of the dislocation and the morphology of the blunt crack as well as the material elastic dissimilarity on the shielding effect and the emission criterion is discussed in detail. The results show that positive screw dislocations can reduce the stress intensity factor of the interfacial blunt crack tip （shielding effect）. The shielding effect increases with the increase of the shear modulus of the lower half-plane, but it decreases with the increase of the dislocation azimuth angle. The critical loads at infinity for dislocation emission increases with the increase of emission angle and curvature radius of blunt crack tip, and the most probable angle for screw dislocation emission is zero. The present solutions contain previous results as special cases.展开更多
Achieving excellent electromagnetic interference(EMI)shielding effectiveness(SE)in high rare earth(RE)-content Mg alloys is currently a significant technical challenge.This work systematically investigated the effects...Achieving excellent electromagnetic interference(EMI)shielding effectiveness(SE)in high rare earth(RE)-content Mg alloys is currently a significant technical challenge.This work systematically investigated the effects of different Nd elements on the electrical conductivity and EMI SE of Mg-12Gd-3Y-xNd alloy by adding Nd elements to the high RE content Mg-12Gd-3Y alloy,followed by a combined process of hot rolling and aging(R-A).The results indicate that the addition of Nd elements leads to reduced solid solubility of Gd and Y,resulting in a large amount of precipitation.The Mg-12Gd-3Y-2.0Nd alloy has the optimum EMI SE after 63%R-A treatment,reaching 88-118 dB at 30-1500 MHz.The Mg-12Gd-3Y-xNd alloy has acicular and granular forms of the Mg5(Gd,Y,Nd)(abbreviated as Mg5RE)phase after R-A treatment.The granular Mg5RE phase gradually breaks up and refines into more minor scales with increasing rolling reduction and is diffusely distributed in the matrix.The acicular Mg5RE phase is densely arranged,with cross-distribution in some areas.The cross-distributed acicular Mg5RE phase,the delicate granular Mg5RE phase,and the denseβ′phase provide more interfaces for reflecting electromagnetic waves and increase the multiple reflection loss of incident electromagnetic waves.In addition,the Mg-12Gd-3Y-xNd alloy deflects most of the c-axis of the grains parallel to the normal direction(ND)as the rolling reduction increases,making the impedance difference between the plate surface and air larger.The increased impedance makes the material reflect more loss to incident electromagnetic waves.The combined use of these two leads to an excellent EMI SE of Mg-12Gd-3Y-xNd with high RE content after R-A treatment.展开更多
Three-dimensional(3D) graphene/SiBCN composites(GF/SiBCN) were prepared by depositing SiBCN ceramics in 3D graphene foam via the chemical vapor infiltration technique. The effect of the heat treatment temperature on t...Three-dimensional(3D) graphene/SiBCN composites(GF/SiBCN) were prepared by depositing SiBCN ceramics in 3D graphene foam via the chemical vapor infiltration technique. The effect of the heat treatment temperature on the microstructure, phase composition, and electromagnetic properties of the GF/SiBCN composite was investigated. The SiBCN ceramics maintained an amorphous structure in the composite below 1400℃ above which the crystallinity of the free carbon phase gradually increased.While the Si3N4 and B4C phases started to crystallize at 1500℃ and their crystallinity increased with temperature, SiC was observed at 1700℃. The electromagnetic shielding effectiveness of GF/SiBCN increased with the heat treatment temperature.展开更多
In this paper,a reflection magnet to be installed in the EAST neutral beam injection system is simulated and designed.The field intensity of reflection magnet of 42-cm maximum bending radius is about 1.539×10-1 T...In this paper,a reflection magnet to be installed in the EAST neutral beam injection system is simulated and designed.The field intensity of reflection magnet of 42-cm maximum bending radius is about 1.539×10-1 T for 100 keV deuterium beam.The shielding cage is formed by rods.Using the ANSOFT software,the magnetic shielding effect was estimated at about 3% at the magnet pole region.展开更多
The electremagnetic radicalization has become more serious. The shielding effectiveness of polyester fabrics with different inlaid distance of parallel metal fibres to electromagnetic wave was studied in this paper on...The electremagnetic radicalization has become more serious. The shielding effectiveness of polyester fabrics with different inlaid distance of parallel metal fibres to electromagnetic wave was studied in this paper on special instrument made by ourselves. The results of test show that the fabric with different inlaid distances of metal fibres and the testing angle between electric field plane and parallel metal fibres of have obvious effect on the shielding effectiveness of electromagnetic wave.展开更多
With the help of the testing apparatus made by ourselves for shielding electromagnetic radiation, the electric conductivity and shielding effectiveness of electromagnetic radiation of polyethylene film contained diffe...With the help of the testing apparatus made by ourselves for shielding electromagnetic radiation, the electric conductivity and shielding effectiveness of electromagnetic radiation of polyethylene film contained different content of carbon particles was systematically studied in this paper. The results indicate that the electric conductivity and shielding effectiveness of electromagnetic radiation of polyethylene /carbon film have closely relations with content of carbon black particles, which exists a critical content value as 14%～30% and its properties will have a tremendous change.展开更多
The shielding effect of the front pile-row on the ice force acting on the back pile-row is studied by ice force model tests. In the tests, the front pile-row is designed to model jacket legs and the back pile-row to m...The shielding effect of the front pile-row on the ice force acting on the back pile-row is studied by ice force model tests. In the tests, the front pile-row is designed to model jacket legs and the back pile-row to model the water resisting pipe-phalanx within the jacket. The shielding factor for ice force corresponding to different conditions are given in this paper. The research indicates that there are many factors, including the longitudinal and lateral spacing between the front and back pile-row, ice attacking angle and the ratio of pile diameter to ice thickness, that influence the shielding effect on ice force.展开更多
The demand of high-performance thin-film-shaped deformable electromagnetic interference(EMI)shielding devices is increasing for the next generation of wearable and miniaturized soft electronics.Although highly reflect...The demand of high-performance thin-film-shaped deformable electromagnetic interference(EMI)shielding devices is increasing for the next generation of wearable and miniaturized soft electronics.Although highly reflective conductive materials can effectively shield EMI,they prevent deformation of the devices owing to rigidity and generate secondary electromagnetic pollution simultaneously.Herein,soft and stretchable EMI shielding thin film devices with absorption-dominant EMI shielding behavior is presented.The devices consist of liquid metal(LM)layer and LM grid-patterned layer separated by a thin elastomeric film,fabricated by leveraging superior adhesion of aerosol-deposited LM on elastomer.The devices demonstrate high electromagnetic shielding effectiveness(SE)(SE_(T) of up to 75 dB)with low reflectance(SER of 1.5 dB at the resonant frequency)owing to EMI absorption induced by multiple internal reflection generated in the LM grid architectures.Remarkably,the excellent stretchability of the LM-based devices facilitates tunable EMI shielding abilities through grid space adjustment upon strain(resonant frequency shift from 81.3 to 71.3 GHz@33%strain)and is also capable of retaining shielding effectiveness even after multiple strain cycles.This newly explored device presents an advanced paradigm for powerful EMI shielding performance for next-generation smart electronics.展开更多
In 1992,E.E.Podkletnov and R.Nieminen found that under certain conditions,ceramic superconductor with composite structure reveals weak shielding properties against gravitational force.In classical Newton's theory ...In 1992,E.E.Podkletnov and R.Nieminen found that under certain conditions,ceramic superconductor with composite structure reveals weak shielding properties against gravitational force.In classical Newton's theory of gravity and even in Einstein's general theory of gravity,there are no grounds of gravitational shielding effects.But in quantum gauge theory of gravity,the gravitational shielding effects can be explained in a simple and natural way.In quantum gauge theory of gravity,gravitational gauge interactions of complex scalar field can be formulated based on gauge principle.After spontaneous symmetry breaking,if the vacuum of the complex scalar field is not stable and uniform,there will be a mass term of gravitational gauge field.When gravitational gauge field propagates in this unstable vacuum of the complex scalar field,it will decays exponentially,which is the nature of gravitational shielding effects.The mechanism of gravitational shielding effects is studied in this paper,and some main properties of gravitational shielding effects are discussed.展开更多
To characterize the shielding effectiveness(SE)of materials against electromagnetic pulse(EMP)that cannot be adequately evaluated by traditional test methods,a transfer function model of SE is proposed.Using homemade ...To characterize the shielding effectiveness(SE)of materials against electromagnetic pulse(EMP)that cannot be adequately evaluated by traditional test methods,a transfer function model of SE is proposed.Using homemade broadband coaxial fixture,the SE of a metal fabric material against square-pulse and electrostatic discharge(ESD)EMP is tested in the time domain.The peak SE calculated from the test results matches well with that obtained theoretically.Based on the system identification theory,we propose the transfer function model of SE,which takes the square pulse and human body model ESD EMP data obtained in the tests as training data and takes the machine model as verification data,as well as a second-order expression of the transfer function.Using the transfer function model,the waveforms of the shield-penetrated square-pulse EMP and the ESD EMP are actually predicted.From the perspective of system identification,this accurate prediction of the shielded waveform of EMP provides a reliable way for evaluating SE of materials against EMP.展开更多
Shielding effect and emission criterion of a screw dislocation near an interracial crisscross crack are dealt within this paper. Utilizing the conformal mapping technique, the closed-form solutions are derived for com...Shielding effect and emission criterion of a screw dislocation near an interracial crisscross crack are dealt within this paper. Utilizing the conformal mapping technique, the closed-form solutions are derived for complex potentialsand stress fields due to a screw dislocation located near the interracial crisscross crack. The stress intensity factor onthe crack tips and the critical stress intensity factor for dislocation emission are also calculated. The influence of theorientation of the dislocation and the morphology of the crisscross crack as well as the material elastic dissimilarity onthe shielding effect and the emission criterion is discussed in detail. The results show that positive screw dislocations canreduce the stress intensity factor of the interracial crisscross crack tip (shielding effect). The shielding effect increases withthe increase of the shear modulus of the lower half-plane, but it decreases with the increase of the dislocation azimuthangle and the distance between the dislocation and the crack tip. The critical loads at infinity for dislocation emissionincreases with the increase of emission angle and the vertical length of the crisscross crack, and the most probable anglefor screw dislocation emission is zero. The present solutions contain previous results as special cases.展开更多
With the increasing application in electromagnetic interference shielding field of high polymer materials, there is an increasing interest in investigating of high polymer composites. The effects of carbon black fract...With the increasing application in electromagnetic interference shielding field of high polymer materials, there is an increasing interest in investigating of high polymer composites. The effects of carbon black fraction on volume resistivity and electromagnetic shielding effectiveness (SE) of nanostructural carbon black (CB)/Acrylonitrile Butadiene Styrene (ABS) composites were studied. The results indicated that when CB mass fraction was over 15%, the volume resistivity dropped sharply and when it rose to 35%, the volume resistivity achieved the lowest value 103 Ω?cm and the SE was about 6 dB. In addition, there are two obvious percolation effect at 15% ~ 20% and 30% ~ 35% CB respectively in the course of the volume resistivity changing.展开更多
基金supported by the National Natural Science Foundation of China(Nos.62101020 and 62141405)the Special Scientific Research Project of Civil Aircraft,China(No.MJZ5-2N22).
文摘As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of aircraft structures. The assessment of electromagnetic SE for Slotted Composite Structures(SCSs) is particularly challenging due to their complex geometries and there remains a lack of suitable models for accurately predicting the SE performance of these intricate configurations. To address this issue, this paper introduces SCS-Net, a Deep Neural Network (DNN) method designed to accurately predict the SE of SCS. This method considers the impacts of various structural parameters, material properties and incident wave parameters on the SE of SCSs. In order to better model the SCS, an improved Nicolson-Ross-Weir (NRW) method is introduced in this paper to provide an equivalent flat structure for the SCS and to calculate the electromagnetic parameters of the equivalent structure. Additionally, the prediction of SE via DNNs is limited by insufficient test data, which hinders support for large-sample training. To address the issue of limited measured data, this paper develops a Measurement-Computation Fusion (MCF) dataset construction method. The predictions based on the simulation results show that the proposed method maintains an error of less than 0.07 dB within the 8–10 GHz frequency range. Furthermore, a new loss function based on the weighted L1-norm is established to improve the prediction accuracy for these parameters. Compared with traditional loss functions, the new loss function reduces the maximum prediction error for equivalent electromagnetic parameters by 47%. This method significantly improves the prediction accuracy of SCS-Net for measured data, with a maximum improvement of 23.88%. These findings demonstrate that the proposed method enables precise SE prediction and design for composite structures while reducing the number of test samples needed.
基金supported from the National Key R&D Program of China(No.2021YFB3701100)the National Natural Science Foundation of China(No.52225101)+1 种基金the Fundamental Research Funds for the Central Universities of China(Nos.2023CDJYXTD-002,2020CDJDPT001)the Graduate Research and Innovation Foundation of Chongqing,China(No.CYB23037).
文摘The impact of Y content on the microstructure,mechanical properties,and electromagnetic interference shielding effectiveness(EMI SE)of the Mg-6Zn-xY-1La-0.5Zr alloy was investigated.After the extrusion treatment of Mg-6Zn-xY-1La-0.5Zr alloy,the large grains that did not experience dynamic recrystallization were elongated along the extrusion direction,and the small-sized dynamic recrystallized grains were distributed around the large grains.The Mg-6Zn-1Y-1La-0.5Zr alloy demonstrated a favorable balance between strength and plasticity,exhibiting ultimate tensile strength,yield strength,and elongation values of 332.3 MPa,267.3 MPa,and 16.2%,respectively.Moreover,the EMI SE within the frequency range of 30-1500 MHz changes from 79 to 110 dB,aligning with the electromagnetic shielding requirements of many high-strength applications.
文摘In order to prepare the shielding fabrics with high efficiency of power frequency(PF)shielding and excellent electrical conductivity,different ratios of aramid/stainless steel fiber blended yarns were used to weave the shielding fabrics with different specifications.The fabric structure,fabric areal density,number of fabric layers,embedding ratio of copper-clad wires wrapped aramid yarns(denoted as CCWWA)and embedding direction were designed,and a total of 34 different types of shielding fabrics were woven for testing.The experiments were mainly conducted to study the influence mechanism of various factors on the PF shielding effectiveness by testing the electrical conductivity and PF shielding effectiveness of the fabrics.The research results indicate that the PF shielding effectiveness improves with increasing fabric areal density and metal fiber content.The fabrics embedded with CCWWA,particularly those with bidirectional embedding,exhibit a significant enhancement in the PF shielding effectiveness,showing an increase of 8-20 dB compared to the fabrics without CCWWA.The PF shielding effectiveness varies across different fabric structures,with plain weave fabrics demonstrating the superior PF shielding effectiveness due to their compact structure.Non-conductive base fabric has minimal impact on the PF shielding effectiveness.As the number of fabric layers increases,the PF shielding effectiveness initially improves but then declines,peaking with double-layer fabrics.
基金the National Key R&D Program of China(2016YFB0301100)the National Natural Science Foundation of China(51571043 and 51531002)+1 种基金the Fundamental Research Funds for the Central Universities(2018CDJDCL0019and cqu2018CDHB1A08)Chongqing Technology Innovation and Application Demonstration(Social and Livelihood)Project(cstc2018jscx-msybX0090)
文摘Microstructure, electrical conductivity, and electromagnetic interference(EMI) shielding effectiveness(SE) of cast Mg-x Zn-y Y(x = 2–5, y = 1–10) alloys were systematically investigated to understand the effects of Zn and Y additions on electrical conductivity and electromagnetic shielding effectiveness of the alloys.Experimental results indicate that the electrical conductivity and SE of the Mg-x Zn-y Y alloys decrease with Y/Zn ratio. Electrical conductivity is the main factor that affects the electromagnetic shielding properties and the variation tendency of electromagnetic shielding properties of the Mg-x Zn-y Y alloys is consistent with conductivity. Valence of Y and Zn atoms, configuration of extranuclear electron and volumetric difference are main reasons for the variations in the electrical conductivity. A high density of second phase and the formation of semi-continuous network structure can also improve the SE value at high frequencies.
基金Project supported by Anhui Province Natural Science Foundation (050440603)
文摘Ni-P and Ni-P-La alloy coatings were prepared by electroplating. Electromagnetic shielding effectiveness under the different components of rare earth or the different operating conditions was tested by the network analyzer. The results show that electromagnetic shielding effectiveness of Ni-P-La alloy coating varies from 45 dB to 70 dB with the variety of the frequency from 10 MHz to 350 MHz. Corrosion of the salt fog impacts on the electromagnetic shielding effectiveness a little. A small amount of rare earth added to plating bath can not only enhance corrosion resistance of coating, but make electromagnetic shielding effectiveness increase by 1 ~ 5 dB.
基金financially supported by the National Natural Science Foundation of China(Nos.21274095 and 51573102)
文摘In this article, hybrid fillers with different dimensions, namely, 2-dimensional（2-D） expanded graphite（EG） and 1-dimensional（1-D） multi-walled carbon nanotubes（CNTs）, were added to aromatic nylon MXD6 matrix via melt-blending, to enhance its thermal and electrical conductivity as well as electromagnetic interference shielding effectiveness（EMI SE）. For ternary composites of MXD6/EG/CNTs, the electrical conductivity reaches up nine orders of magnitude higher compared to that of the neat MXD6 sample, which turned the polymer-based composites from an insulator to a conductor, and the thermal conductivity has been enhanced by 477% compared with that of neat MXD6 sample. Meanwhile, the EMI SE of ternary composite reaches ~50 d B at the overall filler loading of only 18 wt%. This work can provide guidance for the preparation of polymer composites with excellent thermal and electrical conductivity via using hybrid filler.
基金supported by the National Natural Science Foundation of China(Grant No.51037001)
文摘The cavity-mode resonance effect could result in significant degradation of the shielding effectiveness （SE） of a shielding enclosure around its resonance frequencies. In this paper, the influence of coated wall loss on the suppression of the resonance effect is investigated. For this purpose, an equivalent circuit model is employed to analyze the SE of an apertured rectangular cavity coated with an inside layer of resistive material. The model is developed by extending Robinson＇s equivalent circuit model through incorporating the effect of the wall loss into both the propagation constant and the characteristic impedance of the waveguide. Calculation results show that the wall loss could lead to great improvement on the SE for frequencies near the resonance but almost no effect on the SE for frequencies far away from the resonance.
基金financial supports from the National Key R&D Program of China (No. 2016YFB0301100)the National Natural Science Foundation of China (No. 51571043)Fundamental Research Funds for the Central Universities (Nos. 2018CDJDCL0019, cqu2018CDHB1A08 and 2018CDGFCL0005)
文摘The microstructure,electrical conductivity and electromagnetic interference shielding effectiveness of Mg-X(X=Al,Sn,Y and Gd)alloys in as-cast and solution states were systematically investigated in this study.The electrical conductivity and electromagnetic shielding capacity of binary magnesium alloys decrease linearly with alloying element content.The electromagnetic shielding effectiveness of the binary magnesium alloys with the same alloying element content is as follows:Mg-Gd<Mg-Sn<Mg-Y<Mg-Al.The main reason for the differences in electromagnetic interference shielding of the binary magnesium alloys is the change in conductivity,which is mainly affected by volumetric difference of solute atoms and magnesium atoms,solute atomic valence and configuration of extranuclear electron.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 10872065 and 50801025)
文摘Shielding effect and emission criterion of a screw dislocation near an interracial blunt crack are dealt with in this paper. Utilizing the conformal mapping technique, the closed-form solutions are derived for complex potentials and stress fields due to a screw dislocation located near the interracial blunt crack. The stress intensity factor on the crack tips and the critical stress intensity factor for dislocation emission are also calculated. The influence of the orientation of the dislocation and the morphology of the blunt crack as well as the material elastic dissimilarity on the shielding effect and the emission criterion is discussed in detail. The results show that positive screw dislocations can reduce the stress intensity factor of the interfacial blunt crack tip （shielding effect）. The shielding effect increases with the increase of the shear modulus of the lower half-plane, but it decreases with the increase of the dislocation azimuth angle. The critical loads at infinity for dislocation emission increases with the increase of emission angle and curvature radius of blunt crack tip, and the most probable angle for screw dislocation emission is zero. The present solutions contain previous results as special cases.
基金financially supported by the National Key R&D Program of China(2021YFB3701100)the National Natural Science Foundation of China(52225101 and 52171103)the Fundamental Research Funds for the Central Universities(2020CDJDPT001).
文摘Achieving excellent electromagnetic interference(EMI)shielding effectiveness(SE)in high rare earth(RE)-content Mg alloys is currently a significant technical challenge.This work systematically investigated the effects of different Nd elements on the electrical conductivity and EMI SE of Mg-12Gd-3Y-xNd alloy by adding Nd elements to the high RE content Mg-12Gd-3Y alloy,followed by a combined process of hot rolling and aging(R-A).The results indicate that the addition of Nd elements leads to reduced solid solubility of Gd and Y,resulting in a large amount of precipitation.The Mg-12Gd-3Y-2.0Nd alloy has the optimum EMI SE after 63%R-A treatment,reaching 88-118 dB at 30-1500 MHz.The Mg-12Gd-3Y-xNd alloy has acicular and granular forms of the Mg5(Gd,Y,Nd)(abbreviated as Mg5RE)phase after R-A treatment.The granular Mg5RE phase gradually breaks up and refines into more minor scales with increasing rolling reduction and is diffusely distributed in the matrix.The acicular Mg5RE phase is densely arranged,with cross-distribution in some areas.The cross-distributed acicular Mg5RE phase,the delicate granular Mg5RE phase,and the denseβ′phase provide more interfaces for reflecting electromagnetic waves and increase the multiple reflection loss of incident electromagnetic waves.In addition,the Mg-12Gd-3Y-xNd alloy deflects most of the c-axis of the grains parallel to the normal direction(ND)as the rolling reduction increases,making the impedance difference between the plate surface and air larger.The increased impedance makes the material reflect more loss to incident electromagnetic waves.The combined use of these two leads to an excellent EMI SE of Mg-12Gd-3Y-xNd with high RE content after R-A treatment.
基金supported by the National Key Research and Development Program of China (No. 2018YFB1106600)the Chinese National Foundation for Natural Sciences under Contracts (No. 51672217, 51572224)the Fundamental Research Funds for the Central Universities (Grant no. 3102019ghxm014)
文摘Three-dimensional(3D) graphene/SiBCN composites(GF/SiBCN) were prepared by depositing SiBCN ceramics in 3D graphene foam via the chemical vapor infiltration technique. The effect of the heat treatment temperature on the microstructure, phase composition, and electromagnetic properties of the GF/SiBCN composite was investigated. The SiBCN ceramics maintained an amorphous structure in the composite below 1400℃ above which the crystallinity of the free carbon phase gradually increased.While the Si3N4 and B4C phases started to crystallize at 1500℃ and their crystallinity increased with temperature, SiC was observed at 1700℃. The electromagnetic shielding effectiveness of GF/SiBCN increased with the heat treatment temperature.
基金supported by the Knowledge Innovation Program of the Chinese Academy of Sciences:the study and simulation on beam interaction with background particles in neutralization area for NBI,and the key technical and physical problems study for neutral beam steady-state operationsupported by National Natural Science Foundation of China under Grant No.10875146
文摘In this paper,a reflection magnet to be installed in the EAST neutral beam injection system is simulated and designed.The field intensity of reflection magnet of 42-cm maximum bending radius is about 1.539×10-1 T for 100 keV deuterium beam.The shielding cage is formed by rods.Using the ANSOFT software,the magnetic shielding effect was estimated at about 3% at the magnet pole region.
基金This study is supported by Shaanxi Provincial Laboratory of Functional Textiles and Academy Laboratory of Xi’an University of Engineer-ing Science and Technology in Xi’an city ,P.R.Chian
文摘The electremagnetic radicalization has become more serious. The shielding effectiveness of polyester fabrics with different inlaid distance of parallel metal fibres to electromagnetic wave was studied in this paper on special instrument made by ourselves. The results of test show that the fabric with different inlaid distances of metal fibres and the testing angle between electric field plane and parallel metal fibres of have obvious effect on the shielding effectiveness of electromagnetic wave.
文摘With the help of the testing apparatus made by ourselves for shielding electromagnetic radiation, the electric conductivity and shielding effectiveness of electromagnetic radiation of polyethylene film contained different content of carbon particles was systematically studied in this paper. The results indicate that the electric conductivity and shielding effectiveness of electromagnetic radiation of polyethylene /carbon film have closely relations with content of carbon black particles, which exists a critical content value as 14%～30% and its properties will have a tremendous change.
文摘The shielding effect of the front pile-row on the ice force acting on the back pile-row is studied by ice force model tests. In the tests, the front pile-row is designed to model jacket legs and the back pile-row to model the water resisting pipe-phalanx within the jacket. The shielding factor for ice force corresponding to different conditions are given in this paper. The research indicates that there are many factors, including the longitudinal and lateral spacing between the front and back pile-row, ice attacking angle and the ratio of pile diameter to ice thickness, that influence the shielding effect on ice force.
基金supported by National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(RS-2024-00335216,RS-2024-00407084 and RS-2023-00207836)Korea Environment Industry&Technology Institute(KEITI)through the R&D Project of Recycling Development for Future Waste Resources Program,funded by the Korea Ministry of Environment(MOE)(2022003500003).
文摘The demand of high-performance thin-film-shaped deformable electromagnetic interference(EMI)shielding devices is increasing for the next generation of wearable and miniaturized soft electronics.Although highly reflective conductive materials can effectively shield EMI,they prevent deformation of the devices owing to rigidity and generate secondary electromagnetic pollution simultaneously.Herein,soft and stretchable EMI shielding thin film devices with absorption-dominant EMI shielding behavior is presented.The devices consist of liquid metal(LM)layer and LM grid-patterned layer separated by a thin elastomeric film,fabricated by leveraging superior adhesion of aerosol-deposited LM on elastomer.The devices demonstrate high electromagnetic shielding effectiveness(SE)(SE_(T) of up to 75 dB)with low reflectance(SER of 1.5 dB at the resonant frequency)owing to EMI absorption induced by multiple internal reflection generated in the LM grid architectures.Remarkably,the excellent stretchability of the LM-based devices facilitates tunable EMI shielding abilities through grid space adjustment upon strain(resonant frequency shift from 81.3 to 71.3 GHz@33%strain)and is also capable of retaining shielding effectiveness even after multiple strain cycles.This newly explored device presents an advanced paradigm for powerful EMI shielding performance for next-generation smart electronics.
文摘In 1992,E.E.Podkletnov and R.Nieminen found that under certain conditions,ceramic superconductor with composite structure reveals weak shielding properties against gravitational force.In classical Newton's theory of gravity and even in Einstein's general theory of gravity,there are no grounds of gravitational shielding effects.But in quantum gauge theory of gravity,the gravitational shielding effects can be explained in a simple and natural way.In quantum gauge theory of gravity,gravitational gauge interactions of complex scalar field can be formulated based on gauge principle.After spontaneous symmetry breaking,if the vacuum of the complex scalar field is not stable and uniform,there will be a mass term of gravitational gauge field.When gravitational gauge field propagates in this unstable vacuum of the complex scalar field,it will decays exponentially,which is the nature of gravitational shielding effects.The mechanism of gravitational shielding effects is studied in this paper,and some main properties of gravitational shielding effects are discussed.
基金Project supported by National Natural Science Foundation of China(5127718151177174)
文摘To characterize the shielding effectiveness(SE)of materials against electromagnetic pulse(EMP)that cannot be adequately evaluated by traditional test methods,a transfer function model of SE is proposed.Using homemade broadband coaxial fixture,the SE of a metal fabric material against square-pulse and electrostatic discharge(ESD)EMP is tested in the time domain.The peak SE calculated from the test results matches well with that obtained theoretically.Based on the system identification theory,we propose the transfer function model of SE,which takes the square pulse and human body model ESD EMP data obtained in the tests as training data and takes the machine model as verification data,as well as a second-order expression of the transfer function.Using the transfer function model,the waveforms of the shield-penetrated square-pulse EMP and the ESD EMP are actually predicted.From the perspective of system identification,this accurate prediction of the shielded waveform of EMP provides a reliable way for evaluating SE of materials against EMP.
基金Supported by the National Natural Science Foundation of China under Grant Nos. 10872065, 50801025Hunan Provincial Innovation Foundation for Postgraduate under Grant No. CX2009B067
文摘Shielding effect and emission criterion of a screw dislocation near an interracial crisscross crack are dealt within this paper. Utilizing the conformal mapping technique, the closed-form solutions are derived for complex potentialsand stress fields due to a screw dislocation located near the interracial crisscross crack. The stress intensity factor onthe crack tips and the critical stress intensity factor for dislocation emission are also calculated. The influence of theorientation of the dislocation and the morphology of the crisscross crack as well as the material elastic dissimilarity onthe shielding effect and the emission criterion is discussed in detail. The results show that positive screw dislocations canreduce the stress intensity factor of the interracial crisscross crack tip (shielding effect). The shielding effect increases withthe increase of the shear modulus of the lower half-plane, but it decreases with the increase of the dislocation azimuthangle and the distance between the dislocation and the crack tip. The critical loads at infinity for dislocation emissionincreases with the increase of emission angle and the vertical length of the crisscross crack, and the most probable anglefor screw dislocation emission is zero. The present solutions contain previous results as special cases.
文摘With the increasing application in electromagnetic interference shielding field of high polymer materials, there is an increasing interest in investigating of high polymer composites. The effects of carbon black fraction on volume resistivity and electromagnetic shielding effectiveness (SE) of nanostructural carbon black (CB)/Acrylonitrile Butadiene Styrene (ABS) composites were studied. The results indicated that when CB mass fraction was over 15%, the volume resistivity dropped sharply and when it rose to 35%, the volume resistivity achieved the lowest value 103 Ω?cm and the SE was about 6 dB. In addition, there are two obvious percolation effect at 15% ~ 20% and 30% ~ 35% CB respectively in the course of the volume resistivity changing.
