The Shimian area of Sichuan sits at the junction of the Bayan Har block.Sichuan-Yunnan rhombic block,and Yangtze block,where several faults intersect.This region features intense tectonic activity and frequent earthqu...The Shimian area of Sichuan sits at the junction of the Bayan Har block.Sichuan-Yunnan rhombic block,and Yangtze block,where several faults intersect.This region features intense tectonic activity and frequent earthquakes.In this study,we used local seismic waveform data recorded using dense arrays deployed in the Shimian area to obtain the shear wave splitting parameters at 55 seismic stations and thereby determine the crustal anisotropic characteristics of the region.We then analyzed the crustal stress pattern and tectonic setting and explored their relationship in the study area.Although some stations returned a polarization direction of NNW-SSE.a dominant polarization direction of NW-SE was obtained for the fast shear wave at most seismic stations in the study area.The polarization directions of the fast shear wave were highly consistent throughout the study-area.This orientation was in accordance with the direction of the regional principal compressive stress and parallel to the trend of the Xianshuihe and Daliangshan faults.The distribution of crustal anisotropy in this area was affected by the regional tectonic stress field and the fault structures.The mean delay time between fast and slow shear waves was 3.83 ms/km.slightly greater than the values obtained in other regions of Sichuan.This indicates that the crustal media in our study area had a high anisotropic strength and also reveals the influence of tectonic complexity resulting from the intersection of multiple faults on the strength of seismic anisotropy.展开更多
It is well known that shear wave propagates slower across than parallel to a fracture, and as a result, a travelling shear wave splits into two directions when it encounters a fracture. Shear wave splitting and permea...It is well known that shear wave propagates slower across than parallel to a fracture, and as a result, a travelling shear wave splits into two directions when it encounters a fracture. Shear wave splitting and permeability of porous rock core samples having single fracture were experimentally investigated using a high-pressure triaxial cell, which can measure seismic shear wave velocities in two directions mutually perpendicular to the sample axis in addition to the longitudinal compressive wave velocity. A single fracture was created in the samples using a modified Brazilian split test device, where the cylindrical sample edges were loaded on two diametrically opposite lines by sharp guillotines along the sample length. Based on tilt tests and fracture surface profilometry, the method of artificially induced tensile fracture in the sample was found to create repeatable fracture surfaces and morphologies. Seismic velocities of the fractured samples were determined under different levels of stress confinement and fracture shear displacement or mismatch. The effective confining stress was varied from 0.5 MPa to55 MPa, while the fractures were mismatched by 0 mm, 0.45 mm and 1 mm. The degree of matching of the fracture surfaces in the core samples was evaluated using the joint matching coefficient(JMC). Shear wave splitting, as measured by the difference in the magnitudes of shear wave velocities parallel(V_(S1))and perpendicular(V_(S2)) to the fracture, is found to be insensitive to the degree of mismatching of the fracture joint surfaces at 2 MPa, and decreased and approached zero as the effective stress was increased.Simple models for the stress-and JMC-dependent shear wave splitting and fractured rock permeability were developed based on the experimental observations. The effects of the joint wall compressive strength(JCS), JMC and stress on the stress dependency of joint aperture were discussed in terms of hydro-mechanical response. Finally, a useful relationship between fractured rock permeability and shear wave splitting was found after normalization by using JMC.展开更多
We use earthquakes recorded by the China National Seismic Network from 2015 to 2019 and measure shear wave splitting parameters of SKS to study the anisotropic characteristics beneath the mainland of China.In general,...We use earthquakes recorded by the China National Seismic Network from 2015 to 2019 and measure shear wave splitting parameters of SKS to study the anisotropic characteristics beneath the mainland of China.In general,the fast directions change from nearly E-W in western China(northwest China and Qinghai-Tibetan Plateau)to nearly N-S in central China(Ordos and Sichuan-Yunnan),and then turn to approximately E-W in eastern China(North and South China).The delay times of slow wave in eastern China are about 1.0-1.7 s,larger than those in central and western China(about 0.6-1.0 s).In addition,the fast directions in eastern China are highly consistent with the plate motion direction and horizontal GPS velocities with respect to Eurasia,indicating that the observed anisotropy is mainly from the asthenosphere which is strongly coupled to the overlying lithosphere.However,the fast directions in western China are mostly in accord with the strike of the surface structures(such as faults),possibly due to the directional arrangement of crystal lattices caused by shear deformation under tectonic activities.展开更多
Shear wave splitting(SWS)is regarded as the most effective geophysical method to delineate mantle flow fields by detecting seismic azimuthal anisotropy in the earth's upper mantle,especially in tectonically active...Shear wave splitting(SWS)is regarded as the most effective geophysical method to delineate mantle flow fields by detecting seismic azimuthal anisotropy in the earth's upper mantle,especially in tectonically active regions such as subduction zones.The Aleutian-Alaska subduction zone has a convergence rate of approximately 50 mm/yr,with a trench length reaching nearly 2800 km.Such a long subduction zone has led to intensive continental deformation and numerous strong earthquakes in southern and central Alaska,while northern Alaska is relatively inactive.The sharp contrast makes Alaska a favorable locale to investigate the impact of subduction on mantle dynamics.Moreover,the uniqueness of this subduction zone,including the unusual subducting type,varying slab geometry,and atypical magmatic activity and composition,has intrigued the curiosity of many geoscientists.To identify different sources of seismic anisotropy beneath the Alaska region and probe the influence of a geometrically varying subducting slab on mantle dynamics,extensive SWS analyses have been conducted in the past decades.However,the insufficient station and azimuthal coverage,especially in early studies,not only led to some conflicting results but also strongly limited the in-depth investigation of layered anisotropy and the estimation of anisotropy depth.With the completion of the Transportable Array project in Alaska,recent studies have revealed more detailed mantle structures and characteristics based on the dense station coverage and newly collected massive seismic data.In this study,we review significant regional-and continental-scale SWS studies in the Alaska region and conclude the mantle flow fields therein,to understand how a geometrically varying subducting slab alters the regional mantle dynamics.The summarized mantle flow mechanisms are believed to be conducive to the understanding of seismic anisotropy patterns in other subduction zones with a complicated tectonic setting.展开更多
Using seismic data of the aftershocks sequence of the April 20, 2013 Lushan earthquake recorded by seismic temporary and permanent stations in the source region, with the visual inspection of particle motion diagrams,...Using seismic data of the aftershocks sequence of the April 20, 2013 Lushan earthquake recorded by seismic temporary and permanent stations in the source region, with the visual inspection of particle motion diagrams, this paper preliminarily contains the polarization directions of fast shear wave and the time-delays of split shear waves at every station, and analyzes the crustal anisotropic characteristics in the source region. In the study area, the polarization direc- tions at stations BAX, TQU, L 132, L 133, L 134, and L 135 are northeast, which is consistent with the strike of Dachuan- Shuangshi fault. There are two polarization directions at MDS and L131, which are northeast and southeast. The scatter of polarization directions suggests the complex stress field around these two stations where two faults intersect. For the normalized time-delays at every station, the range is 1.02-8.64 ms/km. The largest time-delay is from L134 which is closest to the mainshock, and the smallest one is from L133. The variations in time-delays show the decreasing at stations BAX, L134, and L135 because of the stress-relaxation after earthquake.展开更多
Shear wave splitting(SWS)analysis has been widely employed for fracture characterization in both global seismology and seismic exploration.Two key SWS attributes—fast shear wave polarization and the time delay betwee...Shear wave splitting(SWS)analysis has been widely employed for fracture characterization in both global seismology and seismic exploration.Two key SWS attributes—fast shear wave polarization and the time delay between fast and slow shear waves—can be inverted from four-component seismic data(two horizontal sources and two horizontal receivers).These SWS attributes enable the characterization of subsurface fracture parameters,such as fracture strike and density.In this study,a nine-component vertical seismic profile(VSP)survey was acquired in the Sanhu Depression of the eastern Qaidam Basin,northwestern China.Preliminary analysis of the shear-wave source VSP data reveals two distinct SWS signatures at different depths,corresponding to two separate fractured layers.However,characterizing multiple fractured layers presents significant challenges,as the SWS attributes of deeper fractured layers are strongly influenced by those of overlying fractured formations.Existing approaches for predicting multi-layer fracture parameters are predominantly data-driven and are largely limited to qualitative analysis.To address these challenges,we propose a robust,rock-physics-model-guided method that enables the quantitative estimation of both the fracture strike and fracture density in multiple fractured laye rs.First,the parameters of the shallow fractu red layer are directly estimated from the SWS attributes.Then,synthetic VSP records of the deeper fractured layer are modeled by incorporating Hudson's theory and the reflectivity method.The fracture parameters of the deep fractured layer are inverted by minimizing the difference between the SWS attributes of synthetic records and those of the actual seismic data.A hierarchical search strategy(coarse-scale+refined-scale)is employed to accelerate convergence toward the optimal solution.This investigation provides a practical tool for quantitative characterization of subsurface formations with multiple fractured layers.展开更多
In 2001 three earthquakes occurred in Shidian in Yunnan Province, which were the MS=5.2 on April 10, the MS=5.9 on April 12 and the MS=5.3 on June 8. Based on the data from the station Baoshan of Yunnan Telemetry Digi...In 2001 three earthquakes occurred in Shidian in Yunnan Province, which were the MS=5.2 on April 10, the MS=5.9 on April 12 and the MS=5.3 on June 8. Based on the data from the station Baoshan of Yunnan Telemetry Digital Seismograph Network, the variational characteristics of shear-wave splitting on these series of strong earthquakes has been studied by using the systematic analysis method (SAM) of shear-wave splitting. The result shows the time delays of shear-wave splitting basically increase with earthquake activity intensifying. However the time delays abruptly decrease immediately before strong aftershocks. It accords with the stress relaxation before earthquakes, which was found recently in study on shear-wave splitting. The result suggests it is significant for reducing the harm degree of earthquakes to develop the stress-forecasting on earthquake in strong active tectonic zones and economic developed regions or big cities under the danger of strong earthquakes.展开更多
Using seismic waveform data recorded at station YK (Yingkou) of Liaoning Telemetry Digital Seismic Network, this paper studied the characteristics of shear-wave splitting before and after the Xiuyan MS5.9 (ML5.3) eart...Using seismic waveform data recorded at station YK (Yingkou) of Liaoning Telemetry Digital Seismic Network, this paper studied the characteristics of shear-wave splitting before and after the Xiuyan MS5.9 (ML5.3) earthquake in November 29, 1999 with SAM method. The results show that the predominant polarizations of fast shear-waves at YK is in direction of ENE-WSW, consistent with the direction of regional principal compressive stress and also consistent with the direction of the regional tectonic stress field in North China; time-delays increasing before Xiuyan earthquake may shows accumulation of stress before earthquake. The predominant polarizations of fast shear-waves at YK are also related to the spatial distribution of small earthquakes and correlate with the fault strike. The histogram of monthly average polarizations of fast shear-waves shows that polarizations of fast shear-waves also seems to change from two months before the earthquake, but it still needs more data for verification.展开更多
Polarization analysis of teleseismic data has been used to determine the XKS(SKS,SKKS,and PKS)fast polarization directions and delay times between fast and slow shear waves for 59 seismic stations of both temporary an...Polarization analysis of teleseismic data has been used to determine the XKS(SKS,SKKS,and PKS)fast polarization directions and delay times between fast and slow shear waves for 59 seismic stations of both temporary and permanent broadband seismograph networks deployed in the eastern Himalayan syntaxis(EHS)and surrounding regions.The analysis employed both the grid searching method of the minimum tangential energy and stacking analysis methods to develop an image of upper mantle anisotropy in the EHS and surrounding regions using the newly obtained shear wave splitting parameters and previously published results.The fast polarization directions are oriented along a NE-SW azimuth in the EHS.However,within the surrounding regions,the fast directions show a clockwise rotation pattern around the EHS from NE-SW,to E-W,to NW-SE,and then to N-S.In the EHS and surrounding regions,the fast directions of seismic anisotropy determined using shear wave splitting analysis correlate with surficial geological features including major sutures and faults and with the surface deformation fields derived from global positioning system(GPS)data.The coincidence between structural features in the crust,surface deformation fields and mantle anisotropy suggests that the deformation in the crust and lithospheric mantle is mechanically coupled.In the EHS,the coherence between the fast directions and the NE direction of the subduction of the Indian Plate beneath the Tibetan Plateau suggests that the lithospheric deformation is caused mainly by subduction.In the regions surrounding the EHS,we speculate that a westward retreat of the Burma slab could contribute to the curved anisotropy pattern.The Tibetan Plateau is acted upon by a NE-trending force due to the subduction of the Indian Plate,and also affected by a westward drag force due to the westward retreat produced by the eastward subduction of the Burma slab.The two forces contribute to a curved lithospheric deformation that results in the alignment of the upper mantle peridotite lattice parallel to the deformation direction,and thus generates a curved pattern of fast directions around the EHS.展开更多
Using the cross correlation function analysis method, this paper discusses shear wave splitting and crack-inducedanisotropy in the crust beneath Tangshan, North China, by the digital data from Tangshan strong ground m...Using the cross correlation function analysis method, this paper discusses shear wave splitting and crack-inducedanisotropy in the crust beneath Tangshan, North China, by the digital data from Tangshan strong ground monon temporary arrays. Sixteen of twenty-one stations in the arrays recorded earthquake events available forstudying from 1982 to 1984. Having calculated 131 available records, we get slower shear wave time delay r andfaster shear wave polarization azimuth Paz in Tangshan region, and the cracks density s is got further fromthem. The analysis shows that the stress field is very complicated in Tangshan region and has strongly regionalfeature. Because of the complicated distribution of faults, different shear wave splitting characteristics are shownin 16 stations, scattered r and different Paz. And they also were observed that the r and PaZ values were diversewithin the time scale of hours in more than one station. In Tangshan region the average results of r, Paz and Bare 0. 0071 s. km-1, northwest-west near to east-west and 0.022 respectively. Meantime, the standard devia.tions were calculated in this paper.展开更多
In this paper, variations of shear wave splitting in the 2013 Lushan Ms7.0 earthquake sequence were studied. By analyzing shear wave particle motion of local events in the shear wave window, the fast polarization dire...In this paper, variations of shear wave splitting in the 2013 Lushan Ms7.0 earthquake sequence were studied. By analyzing shear wave particle motion of local events in the shear wave window, the fast polarization directions and the delay time between fast and slow shear waves were derived from seismic recordings at eight stations on the southern segment of the Longmenshan fault zone. In the study region, the fast polarization directions show partition characteristics from south to north. And the systematic changes of the time delays between two split shear waves were also observed. As for spatial distribution, the NE fast polarization directions are consistent with the Longmenshan fault strike in the south of focal region, whereas the NW fast direction is parallel to the direction of regional principal compressive stress in the north of focal region. Stations BAX and TQU are respectively located on the Central and Front-range faults, and because of the direct influence of these faults, the fast directions at both stations show particularity. In time domain, after the main shock, the delay times at stations increased rapidly, and decreased after a period of time. Shear-wave splitting was caused mostly by stress-aligned microcracks in rock below the stations. The results demonstrate changes of local stress field during the main shock and the aftershocks. The stress on the Lushan Ms7.0 earthquake region increased after the main shock, with the stress release caused by the aftershocks and the stress reduced in the late stage.展开更多
Shear wave splitting has been measured from analyzing the three-component digital seismograms recorded at Guiquan station after the 1985 Ms6 1 Luquan earthquake in Yunnan Province. The variations in parameters ofshear...Shear wave splitting has been measured from analyzing the three-component digital seismograms recorded at Guiquan station after the 1985 Ms6 1 Luquan earthquake in Yunnan Province. The variations in parameters ofshear wave splitting with time for over 100 aftershocks have two periods, the local stress Period and the regionalstress period. In the local stress period, there exist two vertical, paralell crack sets intersecting at about (50-60°), both affect on the propagation of S-waves, and the local stress is slightly stronger than the regional stress.With the activity of aftershock going down and the local stress dying away, it is returned to the state of the regional stress in the focal area. The polarizations of the fast split S-wave and their period variations are identicalwith the azimuths and changes of the principal compressive stress axis of focal stress field inferred independentlyfrom earthquake mechanisms, hense, it is interpreted that the shear wave splitting is the effects of anisotropy ofEDA cracks controlled by stress field. The time delay of the slow split S-wave, except the difference betweenthe two periods shows in some examples that it increases in a few hours before an event and decreases in a fewdays after an event on the individual background of period.展开更多
The upper crustal anisotropy of Yunnan area, SE margin of Tibetan Plateau, is investigated by measuring the shear wave splitting of local earthquakes. The mean value of the measured delay times is 0.054 s and far less...The upper crustal anisotropy of Yunnan area, SE margin of Tibetan Plateau, is investigated by measuring the shear wave splitting of local earthquakes. The mean value of the measured delay times is 0.054 s and far less than that from Pms splitting analysis, indicating that the crustal anisotropy is contributed mostly from mid-lower crust. The fast polarization directions are mostly sub-parallel to the maximum horizontal compression directions while the stations near fault zones show fault-parallel fast polarization directions, suggesting both stress and geological structure contribute to the upper crust anisotropy.Comparing fast polarization directions from shear wave splitting of local earthquakes and Pms, large angle differences are shown at most stations, implying different anisotropy properties between upper and mid-lower crust. However, in southwestern Yunnan, the fast polarization directions of Pms and Swave splitting are nearly parallel, and the stress and surface strain rate directions show strong correlation, which may indicate that the surface and deep crust deformations can be explained by the same mechanism and the surface deformation can represent the deformation of the whole crust. Therefore,the high correlation between surface strain and mantle deformation in this area suggests the mechanical coupling between crust and mantle in southwestern Yunnan. In the rest region of Yunnan, the crustmantle coupling mechanisms are supported by the lack of significant crustal anisotropy with Ne S fast polarization directions from Pms splitting. Therefore, we conclude that the crust and upper mantle are coupled in Yunnan, SE margin of Tibetan Plateau.展开更多
Shear wave splitting is studied based on the digital waveforms of three seismic stations DJS, SZD and WUJ, which were set up after the Jiujiang-Ruichang MS5.7 earthquake of November 26, 2005 around the epicenter area....Shear wave splitting is studied based on the digital waveforms of three seismic stations DJS, SZD and WUJ, which were set up after the Jiujiang-Ruichang MS5.7 earthquake of November 26, 2005 around the epicenter area. The result shows that the time delays of slow shear waves of the DJS station, which is not far from the epicenter and where the distribution of faults is complex near the station, are relatively larger and the polarization directions of fast shear waves are not concentrated; the predominant polarization direction of fast shear waves of WUJ station, with single fault distributed nearby, has a difference of 35° to the strike of the fault and is inconsistent with the direction of regional principal compressive stress. The predominant polarization direction of fast shear waves of SZD station with no faults nearby is in accordance with regional principal compressive stress. There is no obvious regular relationshipship between the delay time and the focal depth.展开更多
Through the analysis of S-wave particle motion of local events in the shear wave window, the polariza-tion directions of the faster shear wave and the delay times between the faster and the slower shear waves were der...Through the analysis of S-wave particle motion of local events in the shear wave window, the polariza-tion directions of the faster shear wave and the delay times between the faster and the slower shear waves were derived from seismic recordings at the stations near the fault zones. The shear wave split-ting results of seven stations in the area of Longmenshan fault zone reveal spatial variation of the po-larization directions of the fast shear wave. The directions at stations in the southeastern side of the Longmenshan fault zone (in the Sichuan Basin area) are in the NE direction, whereas the direction at station PWU (in the Plateau), which is in the northwestern side of the faults, is in the EW direction. Systematic changes of the time delays between two split shear waves were also observed. At station L5501 in the southern end of the aftershock zone, the delay times of the slower shear wave decrease systematically after the main shock. After the main shock, the delay times at station PWU were longer than those before the earthquake. Seismic shear wave splitting is caused mostly by stress-aligned microcracks in the rock below the stations. The results demonstrate changes of local stress field dur-ing the main-shock and the aftershocks. The stress in the southern part of Wenchuan seismogenic zone was released by the main-shock and the aftershocks. The crustal stresses were transferred to the northeastern part of the zone, resulting in stress increase at station PWU after the main-shock.展开更多
When propagating through anisotropic rocks in the crust, shear-waves split into faster and slower components with almost orthogonal polarizations. For nearly vertical propagation the polarization of fast shear- wave ...When propagating through anisotropic rocks in the crust, shear-waves split into faster and slower components with almost orthogonal polarizations. For nearly vertical propagation the polarization of fast shear- wave （PFS） is parallel to both the strike of the cracks and the direction of maximum horizontal stress, therefore it is possible to use PFS to study stress in the crust. This study discusses several examples in which PFS is applied to deduce the compressive stress in North China, Longmenshan fault zone of east edge of Tibetan plateau and Yunnan zone of southeast edge of Tibetan plateau, also discusses temporal variations of PFS orientations of 1999 Xiuyan earthquake sequences of northeastern China. The results are consistent to those of other independent traditional stress measurements. There is a bridge between crustal PFS and the crustal principal compressive stress although there are many unclear disturbance sources. This study suggests the PFS results could be used to deduce regional and in situ principal compressive stress in the crust only if there are enough seismic stations and enough data. At least, PFS is a useful choice in the zone where there are a large number of dense seismic stations.展开更多
In 2001 three earthquakes occurred in Shidian in Yunnan Province, which were the MS=5.2 on April 10, the MS=5.9 on April 12 and the MS=5.3 on June 8. Based on the data from the station Baoshan of Yunnan Telemetry Digi...In 2001 three earthquakes occurred in Shidian in Yunnan Province, which were the MS=5.2 on April 10, the MS=5.9 on April 12 and the MS=5.3 on June 8. Based on the data from the station Baoshan of Yunnan Telemetry Digital Seismograph Network, the variational characteristics of shear-wave splitting on these series of strong earthquakes has been studied by using the systematic analysis method (SAM) of shear-wave splitting. The result shows the time delays of shear-wave splitting basically increase with earthquake activity intensifying. However the time delays abruptly decrease immediately before strong aftershocks. It accords with the stress relaxation before earthquakes, which was found recently in study on shear-wave splitting. The result suggests it is significant for reducing the harm degree of earthquakes to develop the stress-forecasting on earthquake in strong active tectonic zones and economic developed regions or big cities under the danger of strong earthquakes.展开更多
This paper mainly observed and analyzed the character of shear-wave splitting in rock specimens while they were in the critical state of rupture. The rock specimens for study are made of Laizhou marble from Shandong, ...This paper mainly observed and analyzed the character of shear-wave splitting in rock specimens while they were in the critical state of rupture. The rock specimens for study are made of Laizhou marble from Shandong, China. A series of records were obtained from two rock specimens when they were in the critical state of rupture. The result shows that, in the critical state just before rock rupture, there may be the phenomenon of rise and fall in the time delay of shear-wave splitting, even though the load was kept constant. That is to say, the time delay of shear-wave splitting may have a falling process before rock rupture.展开更多
Seismic anisotropy and its main features along the convergent boundary between Africa and Iberia are detected through the analysis of teleseismic shear-wave splitting. Waveform data generated by 95 teleseismic events ...Seismic anisotropy and its main features along the convergent boundary between Africa and Iberia are detected through the analysis of teleseismic shear-wave splitting. Waveform data generated by 95 teleseismic events recorded at 17 broadband stations deployed in the western Mediterranean region are used in the present study. Although the station coverage is not uniform in the Iberian Peninsula and north- west Africa, significant variations in the fast polarization directions and delay times are observed at stations located at different tectonic domains. Fast polarization directions are oriented predominantly NW-SE at most stations which are close to the plate boundary and in central Iberia; being consistent with the absolute plate motion in the region. In the northern part of the Iberian Peninsula, fast velocity direc- tions are oriented nearly E--W; coincident with previous results. Few stations located slightly north of the plate boundary and to the southeast of lberia show E--W to NE-SW fast velocity directions, which may be related to the Alpine Orogeny and the extension direction in lberia. Delay times vary significantly between 0.2 and 1.9 s for individual measurements, reflecting a highly anisotropic structure beneath the recording stations. The relative motion between Africa and lberia represents the main reason for the observed NW-SE orientations of the fast velocity directions. However, different causes of anisotropy have also to be considered to explain the wide range of the splitting pattern observed in the western Mediterranean region. Many geophysical observations such as the low Pn velocity, lower lithospheric Q values, higher heat flow and the presence of high conductive features support the mantle flow in the western Mediterranean, which may contribute and even modify the splitting pattern beneath the studied region.展开更多
Based on the propagation characteristics of shear wave in the anisotropic layers,thecorrelation among several splitting shear-wave identification methods hasbeen studied.Thispaper puts forward the method estimating sp...Based on the propagation characteristics of shear wave in the anisotropic layers,thecorrelation among several splitting shear-wave identification methods hasbeen studied.Thispaper puts forward the method estimating splitting shear-wave phases and its reliability byusing of the assumption that variance of noise and useful signal data obey normaldistribution.To check the validity of new method,the identification results and errorestimation corresponding to 95% confidence level by analyzing simulation signals have beengiven.展开更多
基金This work is jointly supported by the National Natural Science Foundation of China(No.41904057)the National Key Research and Development Program of China(No.2018YFC1503402).
文摘The Shimian area of Sichuan sits at the junction of the Bayan Har block.Sichuan-Yunnan rhombic block,and Yangtze block,where several faults intersect.This region features intense tectonic activity and frequent earthquakes.In this study,we used local seismic waveform data recorded using dense arrays deployed in the Shimian area to obtain the shear wave splitting parameters at 55 seismic stations and thereby determine the crustal anisotropic characteristics of the region.We then analyzed the crustal stress pattern and tectonic setting and explored their relationship in the study area.Although some stations returned a polarization direction of NNW-SSE.a dominant polarization direction of NW-SE was obtained for the fast shear wave at most seismic stations in the study area.The polarization directions of the fast shear wave were highly consistent throughout the study-area.This orientation was in accordance with the direction of the regional principal compressive stress and parallel to the trend of the Xianshuihe and Daliangshan faults.The distribution of crustal anisotropy in this area was affected by the regional tectonic stress field and the fault structures.The mean delay time between fast and slow shear waves was 3.83 ms/km.slightly greater than the values obtained in other regions of Sichuan.This indicates that the crustal media in our study area had a high anisotropic strength and also reveals the influence of tectonic complexity resulting from the intersection of multiple faults on the strength of seismic anisotropy.
基金Financial support provided by the U.S.Department of Energy under grant No.DE-FE0000730
文摘It is well known that shear wave propagates slower across than parallel to a fracture, and as a result, a travelling shear wave splits into two directions when it encounters a fracture. Shear wave splitting and permeability of porous rock core samples having single fracture were experimentally investigated using a high-pressure triaxial cell, which can measure seismic shear wave velocities in two directions mutually perpendicular to the sample axis in addition to the longitudinal compressive wave velocity. A single fracture was created in the samples using a modified Brazilian split test device, where the cylindrical sample edges were loaded on two diametrically opposite lines by sharp guillotines along the sample length. Based on tilt tests and fracture surface profilometry, the method of artificially induced tensile fracture in the sample was found to create repeatable fracture surfaces and morphologies. Seismic velocities of the fractured samples were determined under different levels of stress confinement and fracture shear displacement or mismatch. The effective confining stress was varied from 0.5 MPa to55 MPa, while the fractures were mismatched by 0 mm, 0.45 mm and 1 mm. The degree of matching of the fracture surfaces in the core samples was evaluated using the joint matching coefficient(JMC). Shear wave splitting, as measured by the difference in the magnitudes of shear wave velocities parallel(V_(S1))and perpendicular(V_(S2)) to the fracture, is found to be insensitive to the degree of mismatching of the fracture joint surfaces at 2 MPa, and decreased and approached zero as the effective stress was increased.Simple models for the stress-and JMC-dependent shear wave splitting and fractured rock permeability were developed based on the experimental observations. The effects of the joint wall compressive strength(JCS), JMC and stress on the stress dependency of joint aperture were discussed in terms of hydro-mechanical response. Finally, a useful relationship between fractured rock permeability and shear wave splitting was found after normalization by using JMC.
基金supported by the National Natural Science Foundation of China(under grants 41874050,41722401).
文摘We use earthquakes recorded by the China National Seismic Network from 2015 to 2019 and measure shear wave splitting parameters of SKS to study the anisotropic characteristics beneath the mainland of China.In general,the fast directions change from nearly E-W in western China(northwest China and Qinghai-Tibetan Plateau)to nearly N-S in central China(Ordos and Sichuan-Yunnan),and then turn to approximately E-W in eastern China(North and South China).The delay times of slow wave in eastern China are about 1.0-1.7 s,larger than those in central and western China(about 0.6-1.0 s).In addition,the fast directions in eastern China are highly consistent with the plate motion direction and horizontal GPS velocities with respect to Eurasia,indicating that the observed anisotropy is mainly from the asthenosphere which is strongly coupled to the overlying lithosphere.However,the fast directions in western China are mostly in accord with the strike of the surface structures(such as faults),possibly due to the directional arrangement of crystal lattices caused by shear deformation under tectonic activities.
基金supported by the Outstanding Youth Project of Natural Science Foundation of Heilongjiang(YQ2023D006).
文摘Shear wave splitting(SWS)is regarded as the most effective geophysical method to delineate mantle flow fields by detecting seismic azimuthal anisotropy in the earth's upper mantle,especially in tectonically active regions such as subduction zones.The Aleutian-Alaska subduction zone has a convergence rate of approximately 50 mm/yr,with a trench length reaching nearly 2800 km.Such a long subduction zone has led to intensive continental deformation and numerous strong earthquakes in southern and central Alaska,while northern Alaska is relatively inactive.The sharp contrast makes Alaska a favorable locale to investigate the impact of subduction on mantle dynamics.Moreover,the uniqueness of this subduction zone,including the unusual subducting type,varying slab geometry,and atypical magmatic activity and composition,has intrigued the curiosity of many geoscientists.To identify different sources of seismic anisotropy beneath the Alaska region and probe the influence of a geometrically varying subducting slab on mantle dynamics,extensive SWS analyses have been conducted in the past decades.However,the insufficient station and azimuthal coverage,especially in early studies,not only led to some conflicting results but also strongly limited the in-depth investigation of layered anisotropy and the estimation of anisotropy depth.With the completion of the Transportable Array project in Alaska,recent studies have revealed more detailed mantle structures and characteristics based on the dense station coverage and newly collected massive seismic data.In this study,we review significant regional-and continental-scale SWS studies in the Alaska region and conclude the mantle flow fields therein,to understand how a geometrically varying subducting slab alters the regional mantle dynamics.The summarized mantle flow mechanisms are believed to be conducive to the understanding of seismic anisotropy patterns in other subduction zones with a complicated tectonic setting.
基金supported by Research Project in Earthquake Science(Nos.201308018 and No.201108002) National Natural Science Foundation of China(No.40904012)
文摘Using seismic data of the aftershocks sequence of the April 20, 2013 Lushan earthquake recorded by seismic temporary and permanent stations in the source region, with the visual inspection of particle motion diagrams, this paper preliminarily contains the polarization directions of fast shear wave and the time-delays of split shear waves at every station, and analyzes the crustal anisotropic characteristics in the source region. In the study area, the polarization direc- tions at stations BAX, TQU, L 132, L 133, L 134, and L 135 are northeast, which is consistent with the strike of Dachuan- Shuangshi fault. There are two polarization directions at MDS and L131, which are northeast and southeast. The scatter of polarization directions suggests the complex stress field around these two stations where two faults intersect. For the normalized time-delays at every station, the range is 1.02-8.64 ms/km. The largest time-delay is from L134 which is closest to the mainshock, and the smallest one is from L133. The variations in time-delays show the decreasing at stations BAX, L134, and L135 because of the stress-relaxation after earthquake.
基金supported by National Natural Science Foundation of China(W2431028)the SINOPEC Fundamental Research Program(P24258)the CNPC Investigations on fundamental experiments and advanced theoretical methods in geophysical prospecting applications(2022DQ0604-02)。
文摘Shear wave splitting(SWS)analysis has been widely employed for fracture characterization in both global seismology and seismic exploration.Two key SWS attributes—fast shear wave polarization and the time delay between fast and slow shear waves—can be inverted from four-component seismic data(two horizontal sources and two horizontal receivers).These SWS attributes enable the characterization of subsurface fracture parameters,such as fracture strike and density.In this study,a nine-component vertical seismic profile(VSP)survey was acquired in the Sanhu Depression of the eastern Qaidam Basin,northwestern China.Preliminary analysis of the shear-wave source VSP data reveals two distinct SWS signatures at different depths,corresponding to two separate fractured layers.However,characterizing multiple fractured layers presents significant challenges,as the SWS attributes of deeper fractured layers are strongly influenced by those of overlying fractured formations.Existing approaches for predicting multi-layer fracture parameters are predominantly data-driven and are largely limited to qualitative analysis.To address these challenges,we propose a robust,rock-physics-model-guided method that enables the quantitative estimation of both the fracture strike and fracture density in multiple fractured laye rs.First,the parameters of the shallow fractu red layer are directly estimated from the SWS attributes.Then,synthetic VSP records of the deeper fractured layer are modeled by incorporating Hudson's theory and the reflectivity method.The fracture parameters of the deep fractured layer are inverted by minimizing the difference between the SWS attributes of synthetic records and those of the actual seismic data.A hierarchical search strategy(coarse-scale+refined-scale)is employed to accelerate convergence toward the optimal solution.This investigation provides a practical tool for quantitative characterization of subsurface formations with multiple fractured layers.
基金National Natural Science Foundation of China (40274011 40074020) MOST (2001BA601B02) and Joint Seis-mological Science Foundation of China (102068).
文摘In 2001 three earthquakes occurred in Shidian in Yunnan Province, which were the MS=5.2 on April 10, the MS=5.9 on April 12 and the MS=5.3 on June 8. Based on the data from the station Baoshan of Yunnan Telemetry Digital Seismograph Network, the variational characteristics of shear-wave splitting on these series of strong earthquakes has been studied by using the systematic analysis method (SAM) of shear-wave splitting. The result shows the time delays of shear-wave splitting basically increase with earthquake activity intensifying. However the time delays abruptly decrease immediately before strong aftershocks. It accords with the stress relaxation before earthquakes, which was found recently in study on shear-wave splitting. The result suggests it is significant for reducing the harm degree of earthquakes to develop the stress-forecasting on earthquake in strong active tectonic zones and economic developed regions or big cities under the danger of strong earthquakes.
基金Basis and Special Research Foundation, Institute of Earthquake Science, China Earthquake Administration (2007-24)
文摘Using seismic waveform data recorded at station YK (Yingkou) of Liaoning Telemetry Digital Seismic Network, this paper studied the characteristics of shear-wave splitting before and after the Xiuyan MS5.9 (ML5.3) earthquake in November 29, 1999 with SAM method. The results show that the predominant polarizations of fast shear-waves at YK is in direction of ENE-WSW, consistent with the direction of regional principal compressive stress and also consistent with the direction of the regional tectonic stress field in North China; time-delays increasing before Xiuyan earthquake may shows accumulation of stress before earthquake. The predominant polarizations of fast shear-waves at YK are also related to the spatial distribution of small earthquakes and correlate with the fault strike. The histogram of monthly average polarizations of fast shear-waves shows that polarizations of fast shear-waves also seems to change from two months before the earthquake, but it still needs more data for verification.
基金supported by the National Natural Science Foundation of China(Grant Nos.41174070,41474088,41274063)China National Special Fund for Earthquake Scientific Research in Public Interest(Grant Nos.201308011,201008001)the Scientific Investigation of the April 14,2010 M7.1 Yushu,Qinghai Earthquake
文摘Polarization analysis of teleseismic data has been used to determine the XKS(SKS,SKKS,and PKS)fast polarization directions and delay times between fast and slow shear waves for 59 seismic stations of both temporary and permanent broadband seismograph networks deployed in the eastern Himalayan syntaxis(EHS)and surrounding regions.The analysis employed both the grid searching method of the minimum tangential energy and stacking analysis methods to develop an image of upper mantle anisotropy in the EHS and surrounding regions using the newly obtained shear wave splitting parameters and previously published results.The fast polarization directions are oriented along a NE-SW azimuth in the EHS.However,within the surrounding regions,the fast directions show a clockwise rotation pattern around the EHS from NE-SW,to E-W,to NW-SE,and then to N-S.In the EHS and surrounding regions,the fast directions of seismic anisotropy determined using shear wave splitting analysis correlate with surficial geological features including major sutures and faults and with the surface deformation fields derived from global positioning system(GPS)data.The coincidence between structural features in the crust,surface deformation fields and mantle anisotropy suggests that the deformation in the crust and lithospheric mantle is mechanically coupled.In the EHS,the coherence between the fast directions and the NE direction of the subduction of the Indian Plate beneath the Tibetan Plateau suggests that the lithospheric deformation is caused mainly by subduction.In the regions surrounding the EHS,we speculate that a westward retreat of the Burma slab could contribute to the curved anisotropy pattern.The Tibetan Plateau is acted upon by a NE-trending force due to the subduction of the Indian Plate,and also affected by a westward drag force due to the westward retreat produced by the eastward subduction of the Burma slab.The two forces contribute to a curved lithospheric deformation that results in the alignment of the upper mantle peridotite lattice parallel to the deformation direction,and thus generates a curved pattern of fast directions around the EHS.
文摘Using the cross correlation function analysis method, this paper discusses shear wave splitting and crack-inducedanisotropy in the crust beneath Tangshan, North China, by the digital data from Tangshan strong ground monon temporary arrays. Sixteen of twenty-one stations in the arrays recorded earthquake events available forstudying from 1982 to 1984. Having calculated 131 available records, we get slower shear wave time delay r andfaster shear wave polarization azimuth Paz in Tangshan region, and the cracks density s is got further fromthem. The analysis shows that the stress field is very complicated in Tangshan region and has strongly regionalfeature. Because of the complicated distribution of faults, different shear wave splitting characteristics are shownin 16 stations, scattered r and different Paz. And they also were observed that the r and PaZ values were diversewithin the time scale of hours in more than one station. In Tangshan region the average results of r, Paz and Bare 0. 0071 s. km-1, northwest-west near to east-west and 0.022 respectively. Meantime, the standard devia.tions were calculated in this paper.
基金supported by the National Natural Science Foundation of China (Grant Nos. 40904023, 41274063 and 41174070)Scientific Investigation of April 20, 2013 M7.0 Sichuan Lushan Earthquake
文摘In this paper, variations of shear wave splitting in the 2013 Lushan Ms7.0 earthquake sequence were studied. By analyzing shear wave particle motion of local events in the shear wave window, the fast polarization directions and the delay time between fast and slow shear waves were derived from seismic recordings at eight stations on the southern segment of the Longmenshan fault zone. In the study region, the fast polarization directions show partition characteristics from south to north. And the systematic changes of the time delays between two split shear waves were also observed. As for spatial distribution, the NE fast polarization directions are consistent with the Longmenshan fault strike in the south of focal region, whereas the NW fast direction is parallel to the direction of regional principal compressive stress in the north of focal region. Stations BAX and TQU are respectively located on the Central and Front-range faults, and because of the direct influence of these faults, the fast directions at both stations show particularity. In time domain, after the main shock, the delay times at stations increased rapidly, and decreased after a period of time. Shear-wave splitting was caused mostly by stress-aligned microcracks in rock below the stations. The results demonstrate changes of local stress field during the main shock and the aftershocks. The stress on the Lushan Ms7.0 earthquake region increased after the main shock, with the stress release caused by the aftershocks and the stress reduced in the late stage.
文摘Shear wave splitting has been measured from analyzing the three-component digital seismograms recorded at Guiquan station after the 1985 Ms6 1 Luquan earthquake in Yunnan Province. The variations in parameters ofshear wave splitting with time for over 100 aftershocks have two periods, the local stress Period and the regionalstress period. In the local stress period, there exist two vertical, paralell crack sets intersecting at about (50-60°), both affect on the propagation of S-waves, and the local stress is slightly stronger than the regional stress.With the activity of aftershock going down and the local stress dying away, it is returned to the state of the regional stress in the focal area. The polarizations of the fast split S-wave and their period variations are identicalwith the azimuths and changes of the principal compressive stress axis of focal stress field inferred independentlyfrom earthquake mechanisms, hense, it is interpreted that the shear wave splitting is the effects of anisotropy ofEDA cracks controlled by stress field. The time delay of the slow split S-wave, except the difference betweenthe two periods shows in some examples that it increases in a few hours before an event and decreases in a fewdays after an event on the individual background of period.
基金supported by the National 973 Project of China (No.2013CB733303)the open fund of Key Laboratory of Geospace Environment and Geodesy,Ministry of Education (No.15-02-07)
文摘The upper crustal anisotropy of Yunnan area, SE margin of Tibetan Plateau, is investigated by measuring the shear wave splitting of local earthquakes. The mean value of the measured delay times is 0.054 s and far less than that from Pms splitting analysis, indicating that the crustal anisotropy is contributed mostly from mid-lower crust. The fast polarization directions are mostly sub-parallel to the maximum horizontal compression directions while the stations near fault zones show fault-parallel fast polarization directions, suggesting both stress and geological structure contribute to the upper crust anisotropy.Comparing fast polarization directions from shear wave splitting of local earthquakes and Pms, large angle differences are shown at most stations, implying different anisotropy properties between upper and mid-lower crust. However, in southwestern Yunnan, the fast polarization directions of Pms and Swave splitting are nearly parallel, and the stress and surface strain rate directions show strong correlation, which may indicate that the surface and deep crust deformations can be explained by the same mechanism and the surface deformation can represent the deformation of the whole crust. Therefore,the high correlation between surface strain and mantle deformation in this area suggests the mechanical coupling between crust and mantle in southwestern Yunnan. In the rest region of Yunnan, the crustmantle coupling mechanisms are supported by the lack of significant crustal anisotropy with Ne S fast polarization directions from Pms splitting. Therefore, we conclude that the crust and upper mantle are coupled in Yunnan, SE margin of Tibetan Plateau.
基金sponsored by the China Spark Program of Earthquake Science and Technology(XH12027)the Three-Combination Topics of China Earthquake Administration of"Research on the Crustal Medium Anisotropy in the Jiujiang-Ruichang Earthquake Area"the Special Fund of Seismic Industry Research(201008007)
文摘Shear wave splitting is studied based on the digital waveforms of three seismic stations DJS, SZD and WUJ, which were set up after the Jiujiang-Ruichang MS5.7 earthquake of November 26, 2005 around the epicenter area. The result shows that the time delays of slow shear waves of the DJS station, which is not far from the epicenter and where the distribution of faults is complex near the station, are relatively larger and the polarization directions of fast shear waves are not concentrated; the predominant polarization direction of fast shear waves of WUJ station, with single fault distributed nearby, has a difference of 35° to the strike of the fault and is inconsistent with the direction of regional principal compressive stress. The predominant polarization direction of fast shear waves of SZD station with no faults nearby is in accordance with regional principal compressive stress. There is no obvious regular relationshipship between the delay time and the focal depth.
基金Special Project for the Fundamental R & D of Institute of Geophysics, China Earthquake Administration (CEA) (Grant No.DQJB08B20)the CEA Project of "Scientific Investigation for the 2008 Wenchuan M8.0 Earthquake"
文摘Through the analysis of S-wave particle motion of local events in the shear wave window, the polariza-tion directions of the faster shear wave and the delay times between the faster and the slower shear waves were derived from seismic recordings at the stations near the fault zones. The shear wave split-ting results of seven stations in the area of Longmenshan fault zone reveal spatial variation of the po-larization directions of the fast shear wave. The directions at stations in the southeastern side of the Longmenshan fault zone (in the Sichuan Basin area) are in the NE direction, whereas the direction at station PWU (in the Plateau), which is in the northwestern side of the faults, is in the EW direction. Systematic changes of the time delays between two split shear waves were also observed. At station L5501 in the southern end of the aftershock zone, the delay times of the slower shear wave decrease systematically after the main shock. After the main shock, the delay times at station PWU were longer than those before the earthquake. Seismic shear wave splitting is caused mostly by stress-aligned microcracks in the rock below the stations. The results demonstrate changes of local stress field dur-ing the main-shock and the aftershocks. The stress in the southern part of Wenchuan seismogenic zone was released by the main-shock and the aftershocks. The crustal stresses were transferred to the northeastern part of the zone, resulting in stress increase at station PWU after the main-shock.
基金supported by International Science and Technology Cooperation Program of China(2010DFB20190)National Natural Science Foundation of China(41040034 and 41174042)the support by basic research project of Institute of Earthquake Science,China Earthquake Administration(2009IES0211)
文摘When propagating through anisotropic rocks in the crust, shear-waves split into faster and slower components with almost orthogonal polarizations. For nearly vertical propagation the polarization of fast shear- wave （PFS） is parallel to both the strike of the cracks and the direction of maximum horizontal stress, therefore it is possible to use PFS to study stress in the crust. This study discusses several examples in which PFS is applied to deduce the compressive stress in North China, Longmenshan fault zone of east edge of Tibetan plateau and Yunnan zone of southeast edge of Tibetan plateau, also discusses temporal variations of PFS orientations of 1999 Xiuyan earthquake sequences of northeastern China. The results are consistent to those of other independent traditional stress measurements. There is a bridge between crustal PFS and the crustal principal compressive stress although there are many unclear disturbance sources. This study suggests the PFS results could be used to deduce regional and in situ principal compressive stress in the crust only if there are enough seismic stations and enough data. At least, PFS is a useful choice in the zone where there are a large number of dense seismic stations.
基金National Natural Science Foundation of China (40274011, 40074020), MOST (2001BA601B02) and Joint Seismological Science Foundation of China (102068).
文摘In 2001 three earthquakes occurred in Shidian in Yunnan Province, which were the MS=5.2 on April 10, the MS=5.9 on April 12 and the MS=5.3 on June 8. Based on the data from the station Baoshan of Yunnan Telemetry Digital Seismograph Network, the variational characteristics of shear-wave splitting on these series of strong earthquakes has been studied by using the systematic analysis method (SAM) of shear-wave splitting. The result shows the time delays of shear-wave splitting basically increase with earthquake activity intensifying. However the time delays abruptly decrease immediately before strong aftershocks. It accords with the stress relaxation before earthquakes, which was found recently in study on shear-wave splitting. The result suggests it is significant for reducing the harm degree of earthquakes to develop the stress-forecasting on earthquake in strong active tectonic zones and economic developed regions or big cities under the danger of strong earthquakes.
基金the Science and Technology Activity B on Study-abroad Return Scholar of Non-Education System.
文摘This paper mainly observed and analyzed the character of shear-wave splitting in rock specimens while they were in the critical state of rupture. The rock specimens for study are made of Laizhou marble from Shandong, China. A series of records were obtained from two rock specimens when they were in the critical state of rupture. The result shows that, in the critical state just before rock rupture, there may be the phenomenon of rise and fall in the time delay of shear-wave splitting, even though the load was kept constant. That is to say, the time delay of shear-wave splitting may have a falling process before rock rupture.
文摘Seismic anisotropy and its main features along the convergent boundary between Africa and Iberia are detected through the analysis of teleseismic shear-wave splitting. Waveform data generated by 95 teleseismic events recorded at 17 broadband stations deployed in the western Mediterranean region are used in the present study. Although the station coverage is not uniform in the Iberian Peninsula and north- west Africa, significant variations in the fast polarization directions and delay times are observed at stations located at different tectonic domains. Fast polarization directions are oriented predominantly NW-SE at most stations which are close to the plate boundary and in central Iberia; being consistent with the absolute plate motion in the region. In the northern part of the Iberian Peninsula, fast velocity direc- tions are oriented nearly E--W; coincident with previous results. Few stations located slightly north of the plate boundary and to the southeast of lberia show E--W to NE-SW fast velocity directions, which may be related to the Alpine Orogeny and the extension direction in lberia. Delay times vary significantly between 0.2 and 1.9 s for individual measurements, reflecting a highly anisotropic structure beneath the recording stations. The relative motion between Africa and lberia represents the main reason for the observed NW-SE orientations of the fast velocity directions. However, different causes of anisotropy have also to be considered to explain the wide range of the splitting pattern observed in the western Mediterranean region. Many geophysical observations such as the low Pn velocity, lower lithospheric Q values, higher heat flow and the presence of high conductive features support the mantle flow in the western Mediterranean, which may contribute and even modify the splitting pattern beneath the studied region.
基金This project was sponsored by the National Science Foundation of China (49734150) and the Join Earthquake Science Foundation of China Seismological Burear(198061).
文摘Based on the propagation characteristics of shear wave in the anisotropic layers,thecorrelation among several splitting shear-wave identification methods hasbeen studied.Thispaper puts forward the method estimating splitting shear-wave phases and its reliability byusing of the assumption that variance of noise and useful signal data obey normaldistribution.To check the validity of new method,the identification results and errorestimation corresponding to 95% confidence level by analyzing simulation signals have beengiven.
