Rock bolts are extensively utilized in underground engineering as a means of offering support and stability to rock masses in tunnels,mines,and other underground structures.In environments of high ground stress,faults...Rock bolts are extensively utilized in underground engineering as a means of offering support and stability to rock masses in tunnels,mines,and other underground structures.In environments of high ground stress,faults or weak zones can frequently arise in rock formations,presenting a significant challenge for engineering and potentially leading to underground engineering collapse.Rock bolts serve as a crucial structural element for the transmission of tensile stress and are capable of withstanding shear loads to prevent sliding of weak zones within rock mass.Therefore,a complete understanding of the behavior of rock bolts subjected to shear loads is essential.This paper presents a state-of-the-art review of the research progress of rock bolts subjected to shear load in three categories:experiment,numerical simulation,and analytical model.The review focuses on the research studies and developments in this area since the 1970s,providing a comprehensive overview of numerous factors that influence the anchorage performance of rock bolts.These factors include the diameter and angle of the rock bolt installation,rock strength,grouting material,bolt material,borehole diameter,rock bolt preload,normal stress,joint surface roughness and joint expansion angle.The paper reviews the improvement of mechanical parameter setting in numerical simulation of rock bolt shear.Furthermore,it delves into the optimization of the analytical model concerning rock bolt shear theory,approached from the perspectives of both Elastic foundation beam theory coupled with Elastoplasticity theory and Structural mechanic methods.The significance of this review lies in its ability to provide insights into the mechanical behavior of rock bolts.The paper also highlights the limitations of current research and guidelines for further research of rock bolts.展开更多
The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopo...The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopotential theory Solitary waves were generated in the sample under mechanical loading. Their interaction with the vacancy complexes was shown to be able to initiate hot spot in that local region of the complexes. Some parameters of the hot spot as well as solitary waves were calculated. The initiation of the hot spot is accompanied with sufficient local structural relaxation.展开更多
This paper is a continuation of [1]. An example is discussed in derail to illustrate the second order effects. Numerical calculations for the second order elastic material for the z-direction displacement and the stre...This paper is a continuation of [1]. An example is discussed in derail to illustrate the second order effects. Numerical calculations for the second order elastic material for the z-direction displacement and the stress t(rz) are carried out. It is found that the second order effect is to reduce z-direction displacement and to decrease t(rz)inside the circle but to increase its value outside the circle.展开更多
This paper is a continuation of [1]. A closed form solution to the second order elasticity problem, when an isotropic compressible elastic half-space undergoes a deformation owing to a non-uniformly distributed shear ...This paper is a continuation of [1]. A closed form solution to the second order elasticity problem, when an isotropic compressible elastic half-space undergoes a deformation owing to a non-uniformly distributed shear load, is presented. The method of integral transform is employed to determine the solutions.展开更多
In this paper, we study the behavior of the solution at the crack edges for a nearly circular crack with developing cusps subject to shear loading. The problem of finding the resulting force can be written in the form...In this paper, we study the behavior of the solution at the crack edges for a nearly circular crack with developing cusps subject to shear loading. The problem of finding the resulting force can be written in the form of a hypersingular integral equation. The equation is then trans-formed into a similar equation over a circular region using conformal mapping. The equation is solved numerically for the unknown coefficients, which will later be used in finding the stress intensity factors. The sliding and tearing mode stress intensity factors are evaluated for cracks and displayed graphically. Our results seem to agree with the existing asymptotic solution.展开更多
Titanium alloy has been increasingly applied in aviation industry due to its superior performance. However, the titanium alloy structures are less studied. This work investigates the structural behavior of Ti6Al4V tit...Titanium alloy has been increasingly applied in aviation industry due to its superior performance. However, the titanium alloy structures are less studied. This work investigates the structural behavior of Ti6Al4V titanium alloy stiffened panels under in-plane shear load by experiments and numerical analysis. After the shear tests, the buckling instability, the post-buckling process and the failure mechanism of the specimen were obtained. The Finite Element(FE) models were established with the subsequent validation verification. A parametric analysis was implemented to study the influence of stringer thickness and stringer height on the behavior of the stiffened panels. The results show that after the initial local buckling on the skin, the buckling mode jumps several times with the increase of load. The stringers twist when the load reaches a certain level, and finally the structure damages due to the plastic deformation and the global buckling. The shear clip has little effect on the buckling and failure loads. Compared to the relatively large effect on the buckling load, the influence of the stringer thickness and stringer height on the failure load is neglectable.According to the parametric analysis, the stringer thickness influences the final buckling mode and failure mode, while the stringer height affects the buckling mode transformation.展开更多
Custom designed and built meso shear test equipment was used to examine the shear crack propagation in gassy coal under different gas pressures.The spatial-temporal evolution of gas migration pathways in the coal duri...Custom designed and built meso shear test equipment was used to examine the shear crack propagation in gassy coal under different gas pressures.The spatial-temporal evolution of gas migration pathways in the coal during shear loading was also researched.The results show that gas pressure can hasten crack growth at the shear fracture surface,can reduce the shear strength of gassy coal,and can accelerate the shear failure process.Shear failure in gassy coal exhibits five stages:the pre-crack stage;the stable crack growth stage;the unsteady crack growth stage;the fracture stage;and,finally,the friction crack stage.The shear breaking creates two kinds of crack,shear cracks and tensile cracks.Cracks first appear in the shear plane at both ends and then extend toward the center until a shear fracture surface forms.The direction of shear crack propagation diverges from the predetermined shear plane by an angle of about 5°-10°.展开更多
In rock engineering,the cyclic shear characteristics of rough joints under dynamic disturbances are still insufficiently studied.This study conducted cyclic shear experiments on rough joints under dynamic normal loads...In rock engineering,the cyclic shear characteristics of rough joints under dynamic disturbances are still insufficiently studied.This study conducted cyclic shear experiments on rough joints under dynamic normal loads to assess the impact of shear frequency(f_(h))and shear displacement amplitude(u_(d))on the frictional properties of the joint.The results reveal that within a single shearing cycle,the normal displacement negatively correlates with the dynamic normal force.As the shear cycle number increases,the joint surface undergoes progressive wear,resulting in an exponential decrease in the peak normal displacement.In the cyclic shearing procedure,the forward peak values of shear force and friction coefficient display larger fluctuations at either lower or higher shear frequencies.However,under moderate shear frequency conditions,the changes in the shear strength of the joint surface are smaller,and the degree of degradation post-shearing is relatively limited.As the shear displacement amplitude increases,the range of normal deformation within the joint widens.Furthermore,after shearing,the corresponding joint roughness coefficient trend shows a gradual decrease with an increasing shear displacement amplitude,while varying with the shearing frequency in a pattern that initially rises and then falls,with a turning point at 0.05 Hz.The findings of this research contribute to a profound comprehension of the cyclic frictional properties of rock joints under dynamic disturbances.展开更多
This paper investigates the self-loosening of threaded fasteners subjected to dynamic shear load. Three kinds of typical coatings, PTFE, MoS_2, and TiN applied to bolts and nuts, are tested in this investigation. The ...This paper investigates the self-loosening of threaded fasteners subjected to dynamic shear load. Three kinds of typical coatings, PTFE, MoS_2, and TiN applied to bolts and nuts, are tested in this investigation. The study experimentally examines the loosening mechanisms of fasteners and assesses the anti-loosening performance of the three tested coatings based on their tightening characteristics, loosening curves, and the damage of thread surface. Additionally, the anti-loosening performance of the three coatings is compared under different load forms. The results indicate that the PTFE and MoS_2 coatings have significant anti-loosening effect, whereas the anti-loosening performance of Ti N coating is not satisfactory. It is also found that an appropriate increase of the initial tightening torque can significantly improve the anti-loosening effect. In addition, the microscopic analyses of PTFE and MoS2 coating reveal that a reduced initial tightening torque leads to fretting wear on the thread contact surfaces of fasteners, thereby aggravating the damage.展开更多
By the aid of differential geometry analysis on the initial buckling of shell element, a set of new and exact buckling bifurcation equations of the spherical shells is derived. Making use of Galerkin variational metho...By the aid of differential geometry analysis on the initial buckling of shell element, a set of new and exact buckling bifurcation equations of the spherical shells is derived. Making use of Galerkin variational method, the general stability of the hinged spherical shells with the circumferential shear loads is studied. Constructing the buckling mode close to the bifurcation point deformations, the critical eigenvalues, critical load intensities and critical stresses of torsional buckling ranging from the shallow shells to the hemispherical shell are obtained for the first time.展开更多
The work presented in this paper focuses on improving coal loading performance of shear drum.Employing the similarity theory,we carried out a dimensional analysis of the correlation parameters which influence coal loa...The work presented in this paper focuses on improving coal loading performance of shear drum.Employing the similarity theory,we carried out a dimensional analysis of the correlation parameters which influence coal loading performance of shear drum.On the basis of similarity criterion,proportional relationship between the model and the prototype was taken on the condition of taking 1/3 as the similarity coefficient.Besides taking 1600 mm drum as the prototype,four helical angle models of shearer drums(15°,18°,21°,24°) were developed.Simultaneously,based on an established cutting test-bed,coal loading performance tests for the four drums were carried out at the same drum rotational and haulage speeds.After analyzing the data of coal-loading performance and torque,we concluded that:both the coal loading performance and torque vary along the track of the parabola with the opening side facing downwards;the best coal loading performance arises when the helical angle is at 19.3°,while the biggest torque arises at 22.1°;and the coal loading performance had nonlinear relationship with the torque.展开更多
A theoretical rigid-plastic analysis for the dynamic shear failure of beams under impulsive loading is presented when using a travelling plastic shear hinge model which tabes into account material strain hardening. Th...A theoretical rigid-plastic analysis for the dynamic shear failure of beams under impulsive loading is presented when using a travelling plastic shear hinge model which tabes into account material strain hardening. The maximum dynamic shear strain and shear strain-rate can be predicted in addition to the permanent transverse deflections and other parameters. The conditions for the three modes of shear failure, i.e., excess deflection failure, excess shear strain failure and adiabatic shear failure are analyzed. The special case of an infinitesimally small plastic zone is discussed and compared with Nonaka's solution for a rigid, perfectly plastic material. The results can also be generalized to examine the dynamic response of fibre-reinforced beams.展开更多
A topology optimization formulation is developed to find the stiffest structure with desirable material distribution subjected to seismic loads. Finite element models of the structures are generated and the optimality...A topology optimization formulation is developed to find the stiffest structure with desirable material distribution subjected to seismic loads. Finite element models of the structures are generated and the optimality criteria method is modified using a simple penalty approach and introducing fictitious strain energy to simultaneously consider both material volume and displacement constraints. Different types of shear walls with/without opening are investigated. Additionally, the effects of shear wall-frame interaction for single and coupled shear walls are studied. Gravity and seismic loads are applied to the shear walls so that the definitions provide a practical approach for locating the critical parts of these structures. The results suggest new viewpoints for architectural and structural engineering for placement of openings.展开更多
Nonlinear finite element analysis and parametric studies were carried out to study the influence of axial load ratio on the shear behavior of the through-diaphragm connections of concrete-filled square steel tubular c...Nonlinear finite element analysis and parametric studies were carried out to study the influence of axial load ratio on the shear behavior of the through-diaphragm connections of concrete-filled square steel tubular columns. The analysis reveals that smaller axial load ratio can improve the shear bearing capacity and ductility while larger axial load ratio will decrease the shear behavior of the through-diaphragm connections. The parametric studies indicate that the axial load ratio should be limited to less than 0.4 and its influence should be considered in the analysis and design of such connections.展开更多
The dynamic parameters of permafrost are crucial to and directly affect the accuracy of engineering design and numerical simulation. This paper describes a new dynamic load direct shear apparatus that was developed to...The dynamic parameters of permafrost are crucial to and directly affect the accuracy of engineering design and numerical simulation. This paper describes a new dynamic load direct shear apparatus that was developed to measure these parameters. The power systems and measurement and control systems of the device are described, as is a successful validation experiment. The results show that this dynamic load direct shearing device can accurately derive dynamic shear parameters within a certain range of frequencies and ampli- tudes of shear load.展开更多
The strain difference of steel and concrete under vertical concentrated load was analyzed on the basis of elastic theory, and was compared with ideal solution of steel and concrete under vertical uniform load. The res...The strain difference of steel and concrete under vertical concentrated load was analyzed on the basis of elastic theory, and was compared with ideal solution of steel and concrete under vertical uniform load. The results indicate that the computing formula concluded from the paper is believable. The practical structure usually bears concentrated load, so it can be used in the practical engineering.展开更多
A pilot study was conducted at Penn State University to determine whether the type of drywall joint compound would influence the shear strength of wood-frame stud walls sheathed with Gypsum Wall Board (GWB or drywall)...A pilot study was conducted at Penn State University to determine whether the type of drywall joint compound would influence the shear strength of wood-frame stud walls sheathed with Gypsum Wall Board (GWB or drywall). In this study, five 2438 mm by 2438 mm specimens were tested under in-plane cyclic racking loading following the CUREE loading protocol for light-frame wall systems. Three specimens were finished using non-cement based joint compound while the other two used cement based joint compound. Based on the experimental testing of the specimens, the results show that the use of cement based joint compound on drywall joints produces higher shear capacity for the wall system as compared to similar specimens finished with conventional non-cement based joint compound. The result of the study is particularly important for high seismic regions where interior stud walls in residential construction effectively take part in seismic resistance even though wood shear walls are normally used on exterior walls.展开更多
In vitro cell loading experiments are used to investigate stimulation of strain to cellular proliferation. As the flowing conditions of culture fluid in loading systems has been little known, strictly people can not d...In vitro cell loading experiments are used to investigate stimulation of strain to cellular proliferation. As the flowing conditions of culture fluid in loading systems has been little known, strictly people can not detect the influence of strain to cellular proliferation exactly because shear flow can enhance cell proliferation either. Based on the working principle and cyclic loading parameters, we simplify Navier-Stokes equation to describe the flow of culture fluid on substrates of uniaxial and equi-biaxial flat tensile loading systems and four point bending system. With approximate solutions, the distributions of velocity field and wall shear flow to cells are gained. Results show: shear flows are zero in the middle (or fixed point or line) of substrate for all systems, and they get larger proportionally to distance from middle and substrate elongate; the shear flow on the substrate of four point bending system is much greater than those of others. This shear flow in four point bending system, confirmed by Owan, I., et al with OPN mRNA increase in their experiment, could cause more influence to osteoblast-like cells than that caused by strain. We estimate the average magnitude of shear stress in Owan’s device, the results are consistent with other experimental data about shear flow. In conclusion our study makes it possible to differentiate the influence of strain on cellular proliferation to that of shear flow in loading experiments with the devices mentioned above quantitatively.展开更多
基金The Project(52174101)supported by the National Natural Science Foundation of ChinaThe Project(2023A1515011634)supported by Guangdong Basic and Applied Basic Research Foundation.
文摘Rock bolts are extensively utilized in underground engineering as a means of offering support and stability to rock masses in tunnels,mines,and other underground structures.In environments of high ground stress,faults or weak zones can frequently arise in rock formations,presenting a significant challenge for engineering and potentially leading to underground engineering collapse.Rock bolts serve as a crucial structural element for the transmission of tensile stress and are capable of withstanding shear loads to prevent sliding of weak zones within rock mass.Therefore,a complete understanding of the behavior of rock bolts subjected to shear loads is essential.This paper presents a state-of-the-art review of the research progress of rock bolts subjected to shear load in three categories:experiment,numerical simulation,and analytical model.The review focuses on the research studies and developments in this area since the 1970s,providing a comprehensive overview of numerous factors that influence the anchorage performance of rock bolts.These factors include the diameter and angle of the rock bolt installation,rock strength,grouting material,bolt material,borehole diameter,rock bolt preload,normal stress,joint surface roughness and joint expansion angle.The paper reviews the improvement of mechanical parameter setting in numerical simulation of rock bolt shear.Furthermore,it delves into the optimization of the analytical model concerning rock bolt shear theory,approached from the perspectives of both Elastic foundation beam theory coupled with Elastoplasticity theory and Structural mechanic methods.The significance of this review lies in its ability to provide insights into the mechanical behavior of rock bolts.The paper also highlights the limitations of current research and guidelines for further research of rock bolts.
文摘The response of three-dimensional sample of Al, containing vacancy complex, under shear loading was simulated. The molecular dynamics method was used and interaction between atoms was described on the base of pseudopotential theory Solitary waves were generated in the sample under mechanical loading. Their interaction with the vacancy complexes was shown to be able to initiate hot spot in that local region of the complexes. Some parameters of the hot spot as well as solitary waves were calculated. The initiation of the hot spot is accompanied with sufficient local structural relaxation.
文摘This paper is a continuation of [1]. An example is discussed in derail to illustrate the second order effects. Numerical calculations for the second order elastic material for the z-direction displacement and the stress t(rz) are carried out. It is found that the second order effect is to reduce z-direction displacement and to decrease t(rz)inside the circle but to increase its value outside the circle.
文摘This paper is a continuation of [1]. A closed form solution to the second order elasticity problem, when an isotropic compressible elastic half-space undergoes a deformation owing to a non-uniformly distributed shear load, is presented. The method of integral transform is employed to determine the solutions.
基金supported by the Ministry Of Higher Education Malaysia for the Fundamental Research Grant scheme,project No. 01-04-10-897FRthe NSF scholarship
文摘In this paper, we study the behavior of the solution at the crack edges for a nearly circular crack with developing cusps subject to shear loading. The problem of finding the resulting force can be written in the form of a hypersingular integral equation. The equation is then trans-formed into a similar equation over a circular region using conformal mapping. The equation is solved numerically for the unknown coefficients, which will later be used in finding the stress intensity factors. The sliding and tearing mode stress intensity factors are evaluated for cracks and displayed graphically. Our results seem to agree with the existing asymptotic solution.
文摘Titanium alloy has been increasingly applied in aviation industry due to its superior performance. However, the titanium alloy structures are less studied. This work investigates the structural behavior of Ti6Al4V titanium alloy stiffened panels under in-plane shear load by experiments and numerical analysis. After the shear tests, the buckling instability, the post-buckling process and the failure mechanism of the specimen were obtained. The Finite Element(FE) models were established with the subsequent validation verification. A parametric analysis was implemented to study the influence of stringer thickness and stringer height on the behavior of the stiffened panels. The results show that after the initial local buckling on the skin, the buckling mode jumps several times with the increase of load. The stringers twist when the load reaches a certain level, and finally the structure damages due to the plastic deformation and the global buckling. The shear clip has little effect on the buckling and failure loads. Compared to the relatively large effect on the buckling load, the influence of the stringer thickness and stringer height on the failure load is neglectable.According to the parametric analysis, the stringer thickness influences the final buckling mode and failure mode, while the stringer height affects the buckling mode transformation.
基金supported in part by the State Key Basic Research Program of China(No.2011CB201203)in part by the General Project of the National Natural Science Foundation of China(No.50974141)the Fundamental Research Funds for the Central Universities(No.CDJZR12240055)
文摘Custom designed and built meso shear test equipment was used to examine the shear crack propagation in gassy coal under different gas pressures.The spatial-temporal evolution of gas migration pathways in the coal during shear loading was also researched.The results show that gas pressure can hasten crack growth at the shear fracture surface,can reduce the shear strength of gassy coal,and can accelerate the shear failure process.Shear failure in gassy coal exhibits five stages:the pre-crack stage;the stable crack growth stage;the unsteady crack growth stage;the fracture stage;and,finally,the friction crack stage.The shear breaking creates two kinds of crack,shear cracks and tensile cracks.Cracks first appear in the shear plane at both ends and then extend toward the center until a shear fracture surface forms.The direction of shear crack propagation diverges from the predetermined shear plane by an angle of about 5°-10°.
基金funding support from the National Natural Science Foundation of China(Grant Nos.52174092 and 51904290)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20220157).
文摘In rock engineering,the cyclic shear characteristics of rough joints under dynamic disturbances are still insufficiently studied.This study conducted cyclic shear experiments on rough joints under dynamic normal loads to assess the impact of shear frequency(f_(h))and shear displacement amplitude(u_(d))on the frictional properties of the joint.The results reveal that within a single shearing cycle,the normal displacement negatively correlates with the dynamic normal force.As the shear cycle number increases,the joint surface undergoes progressive wear,resulting in an exponential decrease in the peak normal displacement.In the cyclic shearing procedure,the forward peak values of shear force and friction coefficient display larger fluctuations at either lower or higher shear frequencies.However,under moderate shear frequency conditions,the changes in the shear strength of the joint surface are smaller,and the degree of degradation post-shearing is relatively limited.As the shear displacement amplitude increases,the range of normal deformation within the joint widens.Furthermore,after shearing,the corresponding joint roughness coefficient trend shows a gradual decrease with an increasing shear displacement amplitude,while varying with the shearing frequency in a pattern that initially rises and then falls,with a turning point at 0.05 Hz.The findings of this research contribute to a profound comprehension of the cyclic frictional properties of rock joints under dynamic disturbances.
基金the financial support provided by the National Science Funds for Distinguished Young Scholars(No.51025519)the Changjiang Scholarships and Innovation Team Development Plan(No.IRT1178)the Self-Topic Fund of Traction Power State Key Laboratory(No.2016TPL-Z03)
文摘This paper investigates the self-loosening of threaded fasteners subjected to dynamic shear load. Three kinds of typical coatings, PTFE, MoS_2, and TiN applied to bolts and nuts, are tested in this investigation. The study experimentally examines the loosening mechanisms of fasteners and assesses the anti-loosening performance of the three tested coatings based on their tightening characteristics, loosening curves, and the damage of thread surface. Additionally, the anti-loosening performance of the three coatings is compared under different load forms. The results indicate that the PTFE and MoS_2 coatings have significant anti-loosening effect, whereas the anti-loosening performance of Ti N coating is not satisfactory. It is also found that an appropriate increase of the initial tightening torque can significantly improve the anti-loosening effect. In addition, the microscopic analyses of PTFE and MoS2 coating reveal that a reduced initial tightening torque leads to fretting wear on the thread contact surfaces of fasteners, thereby aggravating the damage.
文摘By the aid of differential geometry analysis on the initial buckling of shell element, a set of new and exact buckling bifurcation equations of the spherical shells is derived. Making use of Galerkin variational method, the general stability of the hinged spherical shells with the circumferential shear loads is studied. Constructing the buckling mode close to the bifurcation point deformations, the critical eigenvalues, critical load intensities and critical stresses of torsional buckling ranging from the shallow shells to the hemispherical shell are obtained for the first time.
基金provided by the National Natural Science Foundation of China (No.51005232)the Postdoctoral Science Foundation of China (No.20100481176)
文摘The work presented in this paper focuses on improving coal loading performance of shear drum.Employing the similarity theory,we carried out a dimensional analysis of the correlation parameters which influence coal loading performance of shear drum.On the basis of similarity criterion,proportional relationship between the model and the prototype was taken on the condition of taking 1/3 as the similarity coefficient.Besides taking 1600 mm drum as the prototype,four helical angle models of shearer drums(15°,18°,21°,24°) were developed.Simultaneously,based on an established cutting test-bed,coal loading performance tests for the four drums were carried out at the same drum rotational and haulage speeds.After analyzing the data of coal-loading performance and torque,we concluded that:both the coal loading performance and torque vary along the track of the parabola with the opening side facing downwards;the best coal loading performance arises when the helical angle is at 19.3°,while the biggest torque arises at 22.1°;and the coal loading performance had nonlinear relationship with the torque.
文摘A theoretical rigid-plastic analysis for the dynamic shear failure of beams under impulsive loading is presented when using a travelling plastic shear hinge model which tabes into account material strain hardening. The maximum dynamic shear strain and shear strain-rate can be predicted in addition to the permanent transverse deflections and other parameters. The conditions for the three modes of shear failure, i.e., excess deflection failure, excess shear strain failure and adiabatic shear failure are analyzed. The special case of an infinitesimally small plastic zone is discussed and compared with Nonaka's solution for a rigid, perfectly plastic material. The results can also be generalized to examine the dynamic response of fibre-reinforced beams.
文摘A topology optimization formulation is developed to find the stiffest structure with desirable material distribution subjected to seismic loads. Finite element models of the structures are generated and the optimality criteria method is modified using a simple penalty approach and introducing fictitious strain energy to simultaneously consider both material volume and displacement constraints. Different types of shear walls with/without opening are investigated. Additionally, the effects of shear wall-frame interaction for single and coupled shear walls are studied. Gravity and seismic loads are applied to the shear walls so that the definitions provide a practical approach for locating the critical parts of these structures. The results suggest new viewpoints for architectural and structural engineering for placement of openings.
基金Supported by the National Natural Science Foundation of China(No.51268054 and No.51468061)the Natural Science Foundation of Tianjin(No.13JCQNJC07300)Foundation of Xinjiang University(No.XY110137)
文摘Nonlinear finite element analysis and parametric studies were carried out to study the influence of axial load ratio on the shear behavior of the through-diaphragm connections of concrete-filled square steel tubular columns. The analysis reveals that smaller axial load ratio can improve the shear bearing capacity and ductility while larger axial load ratio will decrease the shear behavior of the through-diaphragm connections. The parametric studies indicate that the axial load ratio should be limited to less than 0.4 and its influence should be considered in the analysis and design of such connections.
基金the support provided by the National 973 Project of China (No. 2012CB026104)the National Science Foundation of China (NSFC) (No. 41171064)the Fundamental Research Funds for the Central Universities (No. 2011JBZ009)
文摘The dynamic parameters of permafrost are crucial to and directly affect the accuracy of engineering design and numerical simulation. This paper describes a new dynamic load direct shear apparatus that was developed to measure these parameters. The power systems and measurement and control systems of the device are described, as is a successful validation experiment. The results show that this dynamic load direct shearing device can accurately derive dynamic shear parameters within a certain range of frequencies and ampli- tudes of shear load.
基金Project supported by the Science and Technology Development Project of Jilin Province (No. 20020631)
文摘The strain difference of steel and concrete under vertical concentrated load was analyzed on the basis of elastic theory, and was compared with ideal solution of steel and concrete under vertical uniform load. The results indicate that the computing formula concluded from the paper is believable. The practical structure usually bears concentrated load, so it can be used in the practical engineering.
文摘A pilot study was conducted at Penn State University to determine whether the type of drywall joint compound would influence the shear strength of wood-frame stud walls sheathed with Gypsum Wall Board (GWB or drywall). In this study, five 2438 mm by 2438 mm specimens were tested under in-plane cyclic racking loading following the CUREE loading protocol for light-frame wall systems. Three specimens were finished using non-cement based joint compound while the other two used cement based joint compound. Based on the experimental testing of the specimens, the results show that the use of cement based joint compound on drywall joints produces higher shear capacity for the wall system as compared to similar specimens finished with conventional non-cement based joint compound. The result of the study is particularly important for high seismic regions where interior stud walls in residential construction effectively take part in seismic resistance even though wood shear walls are normally used on exterior walls.
文摘In vitro cell loading experiments are used to investigate stimulation of strain to cellular proliferation. As the flowing conditions of culture fluid in loading systems has been little known, strictly people can not detect the influence of strain to cellular proliferation exactly because shear flow can enhance cell proliferation either. Based on the working principle and cyclic loading parameters, we simplify Navier-Stokes equation to describe the flow of culture fluid on substrates of uniaxial and equi-biaxial flat tensile loading systems and four point bending system. With approximate solutions, the distributions of velocity field and wall shear flow to cells are gained. Results show: shear flows are zero in the middle (or fixed point or line) of substrate for all systems, and they get larger proportionally to distance from middle and substrate elongate; the shear flow on the substrate of four point bending system is much greater than those of others. This shear flow in four point bending system, confirmed by Owan, I., et al with OPN mRNA increase in their experiment, could cause more influence to osteoblast-like cells than that caused by strain. We estimate the average magnitude of shear stress in Owan’s device, the results are consistent with other experimental data about shear flow. In conclusion our study makes it possible to differentiate the influence of strain on cellular proliferation to that of shear flow in loading experiments with the devices mentioned above quantitatively.
