The rapid development of additive manufacturing and advances in shape memory materials have fueled the progress of four-dimensional （4D） printing. With the right external stimulus, the need for human interaction, se...The rapid development of additive manufacturing and advances in shape memory materials have fueled the progress of four-dimensional （4D） printing. With the right external stimulus, the need for human interaction, sensors, and batteries will be eliminated, and by using additive manufacturing, more complex devices and parts can be produced. With the current understanding of shape memory mechanisms and with improved design for additive manufacturing, reversibility in 4D printing has recently been proven to be feasible. Conventional one-way 4D printing requires human interaction in the programming （or shapesetting） phase, but reversible 4D printing, or two-way 4D printing, will fully eliminate the need for human interference, as the programming stage is replaced with another stimulus. This allows reversible 4D printed parts to be fully dependent on external stimuli; parts can also be potentially reused after every recovery, or even used in continuous cycles-an aspect that carries industrial appeal. This paper presents a review on the mechanisms of shape memory materials that have led to 4D printing, current findings regarding 4D printing in alloys and polymers, and their respective limitations. The reversibility of shape memory materials and their feasibility to be fabricated using three-dimensional （3D） printing are summarized and critically analyzed. For reversible 4D printing, the methods of 3D printing, mechanisms used for actuation, and strategies to achieve reversibility are also highlighted. Finally, prospective future research directions in reversible 4D printing are suggested.展开更多
By consideration of the characteristics of martensitic transformation and the derivation from the application of the group theory to martensitic transformation, it may be concluded that the shape memory effect (SME) c...By consideration of the characteristics of martensitic transformation and the derivation from the application of the group theory to martensitic transformation, it may be concluded that the shape memory effect (SME) can be attained in materials through a martensitic transformation and its reverse transformation. only when there forms single or nearly single variant of martensite, with an absence of the factors causing the generation of the resistance against SME. on this principle, various shape memory materials including nonferrous alloys. iron-based alloys and ceramics containjng zirconia are expected to be further developed. A criterion for thermoelastic martensitic transformation is presented, Factors which may act as the resistance against SME in various materials are briefly described展开更多
Birds have developed near-perfect structures and functionality over millions of years of natural evolution.To improve the efficiency of fixed-wing vehicles in different environments,researchers have developed deformab...Birds have developed near-perfect structures and functionality over millions of years of natural evolution.To improve the efficiency of fixed-wing vehicles in different environments,researchers have developed deformable wings inspired by the wing structures of birds.Shape Memory Alloy(SMA)is applied as a smart material to the deformable wing.Compared with other drive methods,SMA actuators have the advantages of high drive capacity and a simple structure for driving wing deformation.According to the shape memory effect,SMA actuators are classified as single-range and dual-range actuators.The wing structure designed for each SMA drive is unique.By comparing and analyzing the structures of airfoils,airfoils with similar drive forms and deformation structures are put together for review and discussion.The deformable wings are categorized into out-of-face deformation,in-face deformation,airfoil curvature deformation,and combined deformation with multiple degrees of freedom based on the structure and location of the wing that produces the deformation.An overview of the deformed wing is introduced by telling the bionic theory of seagulls.The principles of deformation of the wing,the mechanics of the SMA actuator mechanism,and the aerodynamic characteristics of the deformable wing are presented.The structure and working principle of SMA actuators for each type of deformable wing are explained in detail.Methods and approaches to study the deformability of deformable wings are analyzed and summarized.This work provides comprehensive insights and perspectives for future studies of SMA-driven deformable airfoils.展开更多
The tribological behaviour of Ti-30Zr, Ti-20Zr-10Nb and Ti-19Zr-10Nb-1Fe alloys was investigated using reciprocating friction and wear tests. X-ray diffraction（XRD） results indicate that Ti-30Zr, Ti-20Zr-10Nb and Ti...The tribological behaviour of Ti-30Zr, Ti-20Zr-10Nb and Ti-19Zr-10Nb-1Fe alloys was investigated using reciprocating friction and wear tests. X-ray diffraction（XRD） results indicate that Ti-30Zr, Ti-20Zr-10Nb and Ti-19Zr-10Nb-1Fe alloys are composed of hexagonal a＇-martensite, orthorhombic a＇＇-martensite and bcc β phases,respectively. Ti-30Zr alloy has the highest hardness of HV（273.1 ± 9.3）, while Ti-20Zr-10Nb alloy exhibits the lowest hardness of HV（235.2 ± 20.4） among all the alloys.The tribological results indicate that Ti-30Zr alloy shows the best wear resistance among these alloys, corresponding to the minimum average friction coefficient of 0.052 and the lowest wear rate of 6.4x10^-4mm3·N^-1·m^-1. Ti-20Zr-10Nb alloy displays better wear resistance than Ti-19Zr-10Nb-1Fe alloy, because the iron oxide is easy to fall off and less Nb2O5 films form on the worn surface of the latter.Delamination and abrasive wear in association with adhesive wear are the main wear mechanism of these alloys.展开更多
The effects of microstructure and its evolution on the macroscopic superelastic stress-strain response of polycrystalline Shape Memory Alloy(SMA)are studied by a microstructure-based constitutive model developed in th...The effects of microstructure and its evolution on the macroscopic superelastic stress-strain response of polycrystalline Shape Memory Alloy(SMA)are studied by a microstructure-based constitutive model developed in this paper.The model is established on the following basis:(1)the transformation conditions of the unconstrained single crystal SMA microdomain(to be distinguished from the bulk single crystal),which serve as the local criterion for the derivation of overall transfor- mation yield conditions of the polycrystal;(2)the micro-to macro-transition scheme by which the connection between the polycrystal aggregates and the single crystal microdomain is established and the macroscopic transformation conditions of the polycrystal SMA are derived;(3)the quantitative incorporation of three microstruc- ture factors(i.e.,nucleation,growth and orientation distribution of martensite)into the modeling.These microstructural factors are intrinsic of specific polycrystal SMA systems and the role of each factor in the macroscopic constitutive response is quan- titatively modeled.It is demonstrated that the interplay of these factors will result in different macroscopic transformation kinematics and kinetics which are responsible for the observed macroscopic stress-strain hardening or softening response,the latter will lead to the localization and propagation of transformation bands in TiNi SMA.展开更多
Effects of thermomechanical treatment of cold rolling followed by annealing on microstructure and superelastic behavior of the Ni50Ti50 shape memory alloy were studied.Several specimens were produced by copper boat va...Effects of thermomechanical treatment of cold rolling followed by annealing on microstructure and superelastic behavior of the Ni50Ti50 shape memory alloy were studied.Several specimens were produced by copper boat vacuum induction melting.The homogenized specimens were hot rolled and annealed at 900°C.Thereafter,annealed specimens were subjected to cold rolling with different thickness reductions up to 70%.Transmission electron microscopy revealed that the severe cold rolling led to the formation of a mixed microstructure consisting of nanocrystalline and amorphous phases in Ni50Ti50 alloy.After annealing at 400°C for 1 h,the amorphous phase formed in the cold-rolled specimens was crystallized and a nanocrystalline structure formed.Results showed that with increasing thickness reduction during cold rolling,the recoverable strain of Ni50Ti50 alloy was increased during superelastic experiments such that the 70%cold rolled-annealed specimen exhibited about 12%of recoverable strain.Moreover,with increasing thickness reduction,the critical stress for stress-induced martensitic transformation was increased.It is noteworthy that in the 70%cold rolled-annealed specimen,the damping capacity was measured to be 28 J/cm3 that is significantly higher than that of commercial NiTi alloys.展开更多
This article reports the effect of ageing on the microstructure, martensitic transformation, magnetic properties, and mechanical properties of Ni51FelsGa27Ti4 shape memory alloy. There are five specimens of this alloy...This article reports the effect of ageing on the microstructure, martensitic transformation, magnetic properties, and mechanical properties of Ni51FelsGa27Ti4 shape memory alloy. There are five specimens of this alloy aged at 573 up to 973 K for 3 h per each. This range of ageing temperature greatly affects the microstructure of the alloy. As the ageing temperature increased from 573 up to 973 K, the microstructure of Ni51FelsGa27Ti4 alloy gradually changed from the entirely martensitic matrix at 573 K to the fully austenitic microstructure at 973 K. The volume fraction of precipi- tated Ni3Ti particles increased with the ageing temperature increasing from 573 to 773 K. Further increasing the ageing temperature to 973 K decreased the content of Ni3Ti in the microstructure. The martensitic transformation tempera- ture was decreased steadily by increasing the ageing temperature. The magnetization saturation, remnant magnetization, and coercivity increased with the ageing temperature increasing up to 773 K. A further increase in ageing temperature decreased these raagnetic properties. Moreover, the hardness values were gradually increased at first by increasing the ageing temperature to 773 K, and then dramatically decreased to the lowest value at 973 K.展开更多
Based on the microstructure-based constitutive model established in Part Ⅰ,a detailed numerical investigation on the role of each microstructure pa- rameter in the kinematical and kinetic evolution of polycrystalline...Based on the microstructure-based constitutive model established in Part Ⅰ,a detailed numerical investigation on the role of each microstructure pa- rameter in the kinematical and kinetic evolution of polycrystalline SMA under ax- isymmetrical tension loading is performed.Some macroscopic constitutive features of stress-induced martensite transformation are discussed.展开更多
The transformation behavior of a TiNiCu shape memory alloy electrolyticallycharged with hydrogen was investigated by means of different scanning calorimetry (DSC), opticalmicroscope and X-ray diffraction (XRD). The re...The transformation behavior of a TiNiCu shape memory alloy electrolyticallycharged with hydrogen was investigated by means of different scanning calorimetry (DSC), opticalmicroscope and X-ray diffraction (XRD). The results showed that inter- and inner-granular hydridesformed after charging with hydrogen, and the hydrides suppressed martensitic transformation. Theelectrolytically charged hydrogen can be easily released by heat treatment and the transformationoccurred again, which was verified by the DSC and XRD experiments.展开更多
Effects of cold rolling followed by annealing on microstructural evolution and superelastic properties of the Ti50Ni48Co2 shape memory alloy were investigated. Results showed that during cold rolling, the alloy micros...Effects of cold rolling followed by annealing on microstructural evolution and superelastic properties of the Ti50Ni48Co2 shape memory alloy were investigated. Results showed that during cold rolling, the alloy microstructure evolved through six basic stages including stress-induced martensite transformation and plastic deformation of martensite, deformation twinning, accumulation of dislocations along twin and variant boundaries in martensite, nanocrystallization, amorphization and reverse transformation of martensite to austenite. After annealing at 400 ℃ for 1 h, the amorphous phase formed in the cold-rolled specimens was completely crystallized and an entirely nanocrystalline structure was achieved. The value of stress level of the upper plateau in this nanocrystalline alloy was measured as high as 730 MPa which was significantly higher than that of the coarse-grained Ni50Ti50 and Ti50Ni48Co2 alloys. Moreover, the nanocrystalline Ti50Ni48Co2 alloy had a high damping capacity and considerable efficiency for energy storage.展开更多
In order to increase both the interfacial strength and interphase region strength between TiNi wires and shape memory epoxy,a novel interface structure including aminated CNTs was designed.The morphology shows that af...In order to increase both the interfacial strength and interphase region strength between TiNi wires and shape memory epoxy,a novel interface structure including aminated CNTs was designed.The morphology shows that after electroplating and etching,continuous and homogeneous concave-convex layers form on the surface of astreated TiNi wires,meanwhile aminated CNTs were planted on the surface which could react with shape memory epoxy at the interface region.The interfacial shear strength increases first with the CNT content rising but then a dramatic drop happens,and the maximum is obtained at CNT content of 0.6 g·L^(-1),which is about twice the result of acid etching TiNi wires.展开更多
Two-way shape memory effect (TWSME) was induced into the TiNi shape memoryalloys (SMAs) spring by thermomechanical training after annealing treatment, which has promisingapplication in micro-actuating fields. The TWSM...Two-way shape memory effect (TWSME) was induced into the TiNi shape memoryalloys (SMAs) spring by thermomechanical training after annealing treatment, which has promisingapplication in micro-actuating fields. The TWSME spring can contract upon heating and extend uponcooling. The results show that there is an increase of the recovery ratio up to a maximum TWSME of45%. During the training procedure, transformation temperatures and hysteresis were measured bydifferent scanning calorimetry (DSC). The results show that A_s (reverse transformation starttemperature) and A_f (reverse transformation finish temperature) shift to lower temperature aftertraining. The intervals of A_fA_s and M_s-M_f (M_s and M_f are the martensite start and finishtemperatures, respectively) increase and the heat of transformation decreases after training. Theelectrothermal driving characteristics of the TWSME springs were also investigated with alternatingcurrent density of 3.2-14.7 A/mm^2. It is found that the time response and the maximum contractionratio greatly depend on the magnitude of the electrical current density.展开更多
The properties of FeMnSiCrNi shape memory alloy were investigated. The results show that the best shape memory effect of Fe14Mn6Si9Cr5Ni alloy is 85%. The transformation amount of the ε→γ transformation is not comp...The properties of FeMnSiCrNi shape memory alloy were investigated. The results show that the best shape memory effect of Fe14Mn6Si9Cr5Ni alloy is 85%. The transformation amount of the ε→γ transformation is not complete after heating the alloy to 1000 K, As and Af points drop with increased transformation enthalpy (ΔH γ→ε ) by thermal cycling and increased prestrain. The alloy shows also good creep and stress relaxation resistance. In addition, the alloy having a tensile force of 20 kN and a sealing pressure of 6 MPa can satisfy requirements for possible industrial application on pipe joints.展开更多
Constitutive relations are given for the description of the deformation behavior of shape memory materials. The deformation is the superposition of the elastic, the thermal and the phase transformation deformation cau...Constitutive relations are given for the description of the deformation behavior of shape memory materials. The deformation is the superposition of the elastic, the thermal and the phase transformation deformation caused by the transformation from one to the other among the high temperature phase, the low temperature phase and the stress induced phase. The phase transformation is controlled by the driving force, i.e., the Gibbs energy difference between the phases.展开更多
As one of the newly developing intelligent/smart materials,shape memory alloys(SMAs)have become an important material and have broad application prospects.With smart structures,the integration of SMAs as actuators and...As one of the newly developing intelligent/smart materials,shape memory alloys(SMAs)have become an important material and have broad application prospects.With smart structures,the integration of SMAs as actuators and sensors in structural components,has drawn significant attention and interest in the aerospace field.In this paper,the research status of SMAs at home and abroad in recent years was reviewed,including the characteristics,classification,investigation progress and applications in the aerospace field.Finally,the development trend prospects for SMAs was also presented.展开更多
Achieving versatile room temperature phosphorescence(RTP)materials,especially with tunable mechanical properties and shape memory is attractive and essential but rarely reported.Here,a strategy was reported to realize...Achieving versatile room temperature phosphorescence(RTP)materials,especially with tunable mechanical properties and shape memory is attractive and essential but rarely reported.Here,a strategy was reported to realize multi-functional RTP films with multicolor fluorescence,ultralong afterglow,adjustable mechanical properties,and shape memory through the synergistic dynamic interaction of lanthanide(Ln~Ⅲ)-terpyridine coordination,borate ester bonds,and hydrogen bondings in a poly(vinyl alcohol)(PVA)matrix.By varying the amount of borax,the mechanical properties of the films could be finely controlled due to the change of crosslinking degree of dynamic borate ester bonds in PVA.The assembly and disassembly of borate ester bonds upon the trigger of borax and acid were applied as reversible linkage to achieve programmable shape memory behavior.In addition,the films displayed both fascinating multicolor fluorescence and ultralong afterglow characteristics due to the presence of Ln III doping and confinement of terpyridine in PVA.This study provides a new avenue to impart modulable mechanical strength and shape memory to RTP materials.展开更多
This study presents a semi-analytical solution to describe the behavior of shape memory polymers(SMPs) based on the nonlinear thermo-visco-hyperelasticity which originates from the concepts of internal state variables...This study presents a semi-analytical solution to describe the behavior of shape memory polymers(SMPs) based on the nonlinear thermo-visco-hyperelasticity which originates from the concepts of internal state variables and rational thermodynamics.This method is developed for the finite bending of multilayers in a dual-shape memory effect(SME) cycle.The layer number and layering order are investigated for two different SMPs and a hyperelastic material.In addition to the semi-analytical solution,the finite element simulation is performed to verify the predicted results,where the outcomes demonstrate the excellent accuracy of the proposed solution for predicting the behavior of the multilayer SMPs.Since this method has a much lower computational cost than the finite element method(FEM),it can be used as an effective tool to analyze the SMP behavior under different conditions,including different materials,different geometries,different layer numbers,and different layer arrangements.展开更多
Ti Ni shape memory alloys（SMAs） have been normally used as the competent elements in large part of the industries due to outstanding properties, such as super elasticity and shape memory effects. However, traditiona...Ti Ni shape memory alloys（SMAs） have been normally used as the competent elements in large part of the industries due to outstanding properties, such as super elasticity and shape memory effects. However, traditional machining of SMAs is quite complex due to these properties. Hence, the wire electric discharge machining（WEDM） characteristics of Ti Ni SMA was studied. The experiments were planned as per L27 orthogonal array to minimize the experiments, each experiment was performed under different conditions of pulse duration, pulse off time, servo voltage, flushing pressure and wire speed. A multi-response optimization method using Taguchi design with utility concept has been proposed for simultaneous optimization. The analysis of means（ANOM） and analysis of variance（ANOVA） on signal to noise（S/N） ratio were performed for determining the optimal parameter levels. Taguchi analysis reveals that a combination of 1 μs pulse duration, 3.8 μs pulse off time, 40 V servo voltage, 1.8×105 Pa flushing pressure and 8 m/min wire speed is beneficial for simultaneously maximizing the material removal rate（MRR） and minimizing the surface roughness. The optimization results of WEDM of Ti Ni SMA also indicate that pulse duration significantly affects the material removal rate and surface roughness. The discharged craters, micro cracks and recast layer were observed on the machined surface at large pulse duration.展开更多
Low-cost iron-based shape memory alloys（SMAs） show great potential for engineering applications. The developments of new processing techniques have recently enabled the production of nanocrystalline materials with i...Low-cost iron-based shape memory alloys（SMAs） show great potential for engineering applications. The developments of new processing techniques have recently enabled the production of nanocrystalline materials with improved properties. These developments have opened avenues for newer applications for SMAs. The influence of severe plastic deformation induced by the high-speed high-pressure torsion（HSHPT） process on the microstructural evolution of an Fe–Mn–Si–Cr alloy was investigated. Transmission electron microscopic analysis of the alloy revealed the existence of nanoscale grains with an abundance of stacking faults. The high density of dislocations characteristic of severe plastic deformation was not observed in this alloy. X-ray diffraction studies revealed the presence of ε-martensite with an HCP crystal structure and γ-phase with an FCC structure.展开更多
1.Introduction.The Ti6Al4V alloy is extensively utilized across various indus-trial sectors due to its favorable characteristics,such as lightweight design,high strength,and resistance to corrosion[1].In effort s to f...1.Introduction.The Ti6Al4V alloy is extensively utilized across various indus-trial sectors due to its favorable characteristics,such as lightweight design,high strength,and resistance to corrosion[1].In effort s to further reduce weight,functional elements like electric actuators can be substituted with intelligent materials like shape memory alloys(SMAs)[2,3].Among SMAs,NiTi alloy stands out for its sens-ing and actuation capabilities,significantly enhancing the safety and reliability of engineering structures[4,5].Integrating Ti6Al4V and NiTi alloys within a single component holds the potential to provide precise feedback on mechanical,thermal,or environmen-tal conditions[6,7].展开更多
基金supported by the Singapore Centre for 3D Printing which is funded by the Singapore National Research Foundation.
文摘The rapid development of additive manufacturing and advances in shape memory materials have fueled the progress of four-dimensional （4D） printing. With the right external stimulus, the need for human interaction, sensors, and batteries will be eliminated, and by using additive manufacturing, more complex devices and parts can be produced. With the current understanding of shape memory mechanisms and with improved design for additive manufacturing, reversibility in 4D printing has recently been proven to be feasible. Conventional one-way 4D printing requires human interaction in the programming （or shapesetting） phase, but reversible 4D printing, or two-way 4D printing, will fully eliminate the need for human interference, as the programming stage is replaced with another stimulus. This allows reversible 4D printed parts to be fully dependent on external stimuli; parts can also be potentially reused after every recovery, or even used in continuous cycles-an aspect that carries industrial appeal. This paper presents a review on the mechanisms of shape memory materials that have led to 4D printing, current findings regarding 4D printing in alloys and polymers, and their respective limitations. The reversibility of shape memory materials and their feasibility to be fabricated using three-dimensional （3D） printing are summarized and critically analyzed. For reversible 4D printing, the methods of 3D printing, mechanisms used for actuation, and strategies to achieve reversibility are also highlighted. Finally, prospective future research directions in reversible 4D printing are suggested.
文摘By consideration of the characteristics of martensitic transformation and the derivation from the application of the group theory to martensitic transformation, it may be concluded that the shape memory effect (SME) can be attained in materials through a martensitic transformation and its reverse transformation. only when there forms single or nearly single variant of martensite, with an absence of the factors causing the generation of the resistance against SME. on this principle, various shape memory materials including nonferrous alloys. iron-based alloys and ceramics containjng zirconia are expected to be further developed. A criterion for thermoelastic martensitic transformation is presented, Factors which may act as the resistance against SME in various materials are briefly described
基金supported by the National Science Fund for Distinguished Young Scholars(No.52025053)National Natural Science Foundation of China(No.52305302)+1 种基金the Natural Science Foundation of Jilin Province(No.20220101216JC)the asterisk indicates the corresponding authors.
文摘Birds have developed near-perfect structures and functionality over millions of years of natural evolution.To improve the efficiency of fixed-wing vehicles in different environments,researchers have developed deformable wings inspired by the wing structures of birds.Shape Memory Alloy(SMA)is applied as a smart material to the deformable wing.Compared with other drive methods,SMA actuators have the advantages of high drive capacity and a simple structure for driving wing deformation.According to the shape memory effect,SMA actuators are classified as single-range and dual-range actuators.The wing structure designed for each SMA drive is unique.By comparing and analyzing the structures of airfoils,airfoils with similar drive forms and deformation structures are put together for review and discussion.The deformable wings are categorized into out-of-face deformation,in-face deformation,airfoil curvature deformation,and combined deformation with multiple degrees of freedom based on the structure and location of the wing that produces the deformation.An overview of the deformed wing is introduced by telling the bionic theory of seagulls.The principles of deformation of the wing,the mechanics of the SMA actuator mechanism,and the aerodynamic characteristics of the deformable wing are presented.The structure and working principle of SMA actuators for each type of deformable wing are explained in detail.Methods and approaches to study the deformability of deformable wings are analyzed and summarized.This work provides comprehensive insights and perspectives for future studies of SMA-driven deformable airfoils.
基金financially supported by the National Natural Science Foundation of China (Nos. 51371016 and 51401027)the China Postdoctoral Science Foundation Funded Project (No.2016M591040)
文摘The tribological behaviour of Ti-30Zr, Ti-20Zr-10Nb and Ti-19Zr-10Nb-1Fe alloys was investigated using reciprocating friction and wear tests. X-ray diffraction（XRD） results indicate that Ti-30Zr, Ti-20Zr-10Nb and Ti-19Zr-10Nb-1Fe alloys are composed of hexagonal a＇-martensite, orthorhombic a＇＇-martensite and bcc β phases,respectively. Ti-30Zr alloy has the highest hardness of HV（273.1 ± 9.3）, while Ti-20Zr-10Nb alloy exhibits the lowest hardness of HV（235.2 ± 20.4） among all the alloys.The tribological results indicate that Ti-30Zr alloy shows the best wear resistance among these alloys, corresponding to the minimum average friction coefficient of 0.052 and the lowest wear rate of 6.4x10^-4mm3·N^-1·m^-1. Ti-20Zr-10Nb alloy displays better wear resistance than Ti-19Zr-10Nb-1Fe alloy, because the iron oxide is easy to fall off and less Nb2O5 films form on the worn surface of the latter.Delamination and abrasive wear in association with adhesive wear are the main wear mechanism of these alloys.
基金The project supported by the Research Grant Committee(RGC)of Hong Kong SARthe National Natural Science Foundation of China and the Provincial Natural Foundation of Jiangxi Province of China
文摘The effects of microstructure and its evolution on the macroscopic superelastic stress-strain response of polycrystalline Shape Memory Alloy(SMA)are studied by a microstructure-based constitutive model developed in this paper.The model is established on the following basis:(1)the transformation conditions of the unconstrained single crystal SMA microdomain(to be distinguished from the bulk single crystal),which serve as the local criterion for the derivation of overall transfor- mation yield conditions of the polycrystal;(2)the micro-to macro-transition scheme by which the connection between the polycrystal aggregates and the single crystal microdomain is established and the macroscopic transformation conditions of the polycrystal SMA are derived;(3)the quantitative incorporation of three microstruc- ture factors(i.e.,nucleation,growth and orientation distribution of martensite)into the modeling.These microstructural factors are intrinsic of specific polycrystal SMA systems and the role of each factor in the macroscopic constitutive response is quan- titatively modeled.It is demonstrated that the interplay of these factors will result in different macroscopic transformation kinematics and kinetics which are responsible for the observed macroscopic stress-strain hardening or softening response,the latter will lead to the localization and propagation of transformation bands in TiNi SMA.
文摘Effects of thermomechanical treatment of cold rolling followed by annealing on microstructure and superelastic behavior of the Ni50Ti50 shape memory alloy were studied.Several specimens were produced by copper boat vacuum induction melting.The homogenized specimens were hot rolled and annealed at 900°C.Thereafter,annealed specimens were subjected to cold rolling with different thickness reductions up to 70%.Transmission electron microscopy revealed that the severe cold rolling led to the formation of a mixed microstructure consisting of nanocrystalline and amorphous phases in Ni50Ti50 alloy.After annealing at 400°C for 1 h,the amorphous phase formed in the cold-rolled specimens was crystallized and a nanocrystalline structure formed.Results showed that with increasing thickness reduction during cold rolling,the recoverable strain of Ni50Ti50 alloy was increased during superelastic experiments such that the 70%cold rolled-annealed specimen exhibited about 12%of recoverable strain.Moreover,with increasing thickness reduction,the critical stress for stress-induced martensitic transformation was increased.It is noteworthy that in the 70%cold rolled-annealed specimen,the damping capacity was measured to be 28 J/cm3 that is significantly higher than that of commercial NiTi alloys.
文摘This article reports the effect of ageing on the microstructure, martensitic transformation, magnetic properties, and mechanical properties of Ni51FelsGa27Ti4 shape memory alloy. There are five specimens of this alloy aged at 573 up to 973 K for 3 h per each. This range of ageing temperature greatly affects the microstructure of the alloy. As the ageing temperature increased from 573 up to 973 K, the microstructure of Ni51FelsGa27Ti4 alloy gradually changed from the entirely martensitic matrix at 573 K to the fully austenitic microstructure at 973 K. The volume fraction of precipi- tated Ni3Ti particles increased with the ageing temperature increasing from 573 to 773 K. Further increasing the ageing temperature to 973 K decreased the content of Ni3Ti in the microstructure. The martensitic transformation tempera- ture was decreased steadily by increasing the ageing temperature. The magnetization saturation, remnant magnetization, and coercivity increased with the ageing temperature increasing up to 773 K. A further increase in ageing temperature decreased these raagnetic properties. Moreover, the hardness values were gradually increased at first by increasing the ageing temperature to 773 K, and then dramatically decreased to the lowest value at 973 K.
基金The subject supported by the Research Grant Committee(RGC)of Hong Kong SARthe National Natural Science Foundation of China and the Provincial Natural Science Foundation of Jiangxi Province of China
文摘Based on the microstructure-based constitutive model established in Part Ⅰ,a detailed numerical investigation on the role of each microstructure pa- rameter in the kinematical and kinetic evolution of polycrystalline SMA under ax- isymmetrical tension loading is performed.Some macroscopic constitutive features of stress-induced martensite transformation are discussed.
基金This project is financially supported by the National Natural Science Foundation of China (No.10175042) and by the Pro-gram for New Century Excellent Talents in Universities.
文摘The transformation behavior of a TiNiCu shape memory alloy electrolyticallycharged with hydrogen was investigated by means of different scanning calorimetry (DSC), opticalmicroscope and X-ray diffraction (XRD). The results showed that inter- and inner-granular hydridesformed after charging with hydrogen, and the hydrides suppressed martensitic transformation. Theelectrolytically charged hydrogen can be easily released by heat treatment and the transformationoccurred again, which was verified by the DSC and XRD experiments.
文摘Effects of cold rolling followed by annealing on microstructural evolution and superelastic properties of the Ti50Ni48Co2 shape memory alloy were investigated. Results showed that during cold rolling, the alloy microstructure evolved through six basic stages including stress-induced martensite transformation and plastic deformation of martensite, deformation twinning, accumulation of dislocations along twin and variant boundaries in martensite, nanocrystallization, amorphization and reverse transformation of martensite to austenite. After annealing at 400 ℃ for 1 h, the amorphous phase formed in the cold-rolled specimens was completely crystallized and an entirely nanocrystalline structure was achieved. The value of stress level of the upper plateau in this nanocrystalline alloy was measured as high as 730 MPa which was significantly higher than that of the coarse-grained Ni50Ti50 and Ti50Ni48Co2 alloys. Moreover, the nanocrystalline Ti50Ni48Co2 alloy had a high damping capacity and considerable efficiency for energy storage.
基金financially supported by the National Natural Science Foundation of China(No.51201014)。
文摘In order to increase both the interfacial strength and interphase region strength between TiNi wires and shape memory epoxy,a novel interface structure including aminated CNTs was designed.The morphology shows that after electroplating and etching,continuous and homogeneous concave-convex layers form on the surface of astreated TiNi wires,meanwhile aminated CNTs were planted on the surface which could react with shape memory epoxy at the interface region.The interfacial shear strength increases first with the CNT content rising but then a dramatic drop happens,and the maximum is obtained at CNT content of 0.6 g·L^(-1),which is about twice the result of acid etching TiNi wires.
基金This project is financially supported by the National Natural Science Foundation of China (No. 10175042)
文摘Two-way shape memory effect (TWSME) was induced into the TiNi shape memoryalloys (SMAs) spring by thermomechanical training after annealing treatment, which has promisingapplication in micro-actuating fields. The TWSME spring can contract upon heating and extend uponcooling. The results show that there is an increase of the recovery ratio up to a maximum TWSME of45%. During the training procedure, transformation temperatures and hysteresis were measured bydifferent scanning calorimetry (DSC). The results show that A_s (reverse transformation starttemperature) and A_f (reverse transformation finish temperature) shift to lower temperature aftertraining. The intervals of A_fA_s and M_s-M_f (M_s and M_f are the martensite start and finishtemperatures, respectively) increase and the heat of transformation decreases after training. Theelectrothermal driving characteristics of the TWSME springs were also investigated with alternatingcurrent density of 3.2-14.7 A/mm^2. It is found that the time response and the maximum contractionratio greatly depend on the magnitude of the electrical current density.
文摘The properties of FeMnSiCrNi shape memory alloy were investigated. The results show that the best shape memory effect of Fe14Mn6Si9Cr5Ni alloy is 85%. The transformation amount of the ε→γ transformation is not complete after heating the alloy to 1000 K, As and Af points drop with increased transformation enthalpy (ΔH γ→ε ) by thermal cycling and increased prestrain. The alloy shows also good creep and stress relaxation resistance. In addition, the alloy having a tensile force of 20 kN and a sealing pressure of 6 MPa can satisfy requirements for possible industrial application on pipe joints.
基金Work accomplished at the laboratory for strength and vibration of mechanical structures, Xi’an Jiaotong University, and partially supported by National Science Foundation of China
文摘Constitutive relations are given for the description of the deformation behavior of shape memory materials. The deformation is the superposition of the elastic, the thermal and the phase transformation deformation caused by the transformation from one to the other among the high temperature phase, the low temperature phase and the stress induced phase. The phase transformation is controlled by the driving force, i.e., the Gibbs energy difference between the phases.
文摘As one of the newly developing intelligent/smart materials,shape memory alloys(SMAs)have become an important material and have broad application prospects.With smart structures,the integration of SMAs as actuators and sensors in structural components,has drawn significant attention and interest in the aerospace field.In this paper,the research status of SMAs at home and abroad in recent years was reviewed,including the characteristics,classification,investigation progress and applications in the aerospace field.Finally,the development trend prospects for SMAs was also presented.
基金supported by the National Natural Science Foundation of China(No.22205249)the Sino-German Mobility Program(No.M-0424)Ningbo International Cooperation Project(No.2023H019)。
文摘Achieving versatile room temperature phosphorescence(RTP)materials,especially with tunable mechanical properties and shape memory is attractive and essential but rarely reported.Here,a strategy was reported to realize multi-functional RTP films with multicolor fluorescence,ultralong afterglow,adjustable mechanical properties,and shape memory through the synergistic dynamic interaction of lanthanide(Ln~Ⅲ)-terpyridine coordination,borate ester bonds,and hydrogen bondings in a poly(vinyl alcohol)(PVA)matrix.By varying the amount of borax,the mechanical properties of the films could be finely controlled due to the change of crosslinking degree of dynamic borate ester bonds in PVA.The assembly and disassembly of borate ester bonds upon the trigger of borax and acid were applied as reversible linkage to achieve programmable shape memory behavior.In addition,the films displayed both fascinating multicolor fluorescence and ultralong afterglow characteristics due to the presence of Ln III doping and confinement of terpyridine in PVA.This study provides a new avenue to impart modulable mechanical strength and shape memory to RTP materials.
基金Project supported by the Iran National Science Foundation (INSF)(No.98027408)。
文摘This study presents a semi-analytical solution to describe the behavior of shape memory polymers(SMPs) based on the nonlinear thermo-visco-hyperelasticity which originates from the concepts of internal state variables and rational thermodynamics.This method is developed for the finite bending of multilayers in a dual-shape memory effect(SME) cycle.The layer number and layering order are investigated for two different SMPs and a hyperelastic material.In addition to the semi-analytical solution,the finite element simulation is performed to verify the predicted results,where the outcomes demonstrate the excellent accuracy of the proposed solution for predicting the behavior of the multilayer SMPs.Since this method has a much lower computational cost than the finite element method(FEM),it can be used as an effective tool to analyze the SMP behavior under different conditions,including different materials,different geometries,different layer numbers,and different layer arrangements.
文摘Ti Ni shape memory alloys（SMAs） have been normally used as the competent elements in large part of the industries due to outstanding properties, such as super elasticity and shape memory effects. However, traditional machining of SMAs is quite complex due to these properties. Hence, the wire electric discharge machining（WEDM） characteristics of Ti Ni SMA was studied. The experiments were planned as per L27 orthogonal array to minimize the experiments, each experiment was performed under different conditions of pulse duration, pulse off time, servo voltage, flushing pressure and wire speed. A multi-response optimization method using Taguchi design with utility concept has been proposed for simultaneous optimization. The analysis of means（ANOM） and analysis of variance（ANOVA） on signal to noise（S/N） ratio were performed for determining the optimal parameter levels. Taguchi analysis reveals that a combination of 1 μs pulse duration, 3.8 μs pulse off time, 40 V servo voltage, 1.8×105 Pa flushing pressure and 8 m/min wire speed is beneficial for simultaneously maximizing the material removal rate（MRR） and minimizing the surface roughness. The optimization results of WEDM of Ti Ni SMA also indicate that pulse duration significantly affects the material removal rate and surface roughness. The discharged craters, micro cracks and recast layer were observed on the machined surface at large pulse duration.
基金supported by Project PN.IIPT-PCCA-2011-3.1-0174,Contract 144/2012
文摘Low-cost iron-based shape memory alloys（SMAs） show great potential for engineering applications. The developments of new processing techniques have recently enabled the production of nanocrystalline materials with improved properties. These developments have opened avenues for newer applications for SMAs. The influence of severe plastic deformation induced by the high-speed high-pressure torsion（HSHPT） process on the microstructural evolution of an Fe–Mn–Si–Cr alloy was investigated. Transmission electron microscopic analysis of the alloy revealed the existence of nanoscale grains with an abundance of stacking faults. The high density of dislocations characteristic of severe plastic deformation was not observed in this alloy. X-ray diffraction studies revealed the presence of ε-martensite with an HCP crystal structure and γ-phase with an FCC structure.
基金supported by the National Natural Science Foundation of China(Grant No.52235006)the National Key Research and Development Program of China(Grant No.2022YFB4600500)+3 种基金the National Natural Science Foundation of China(Grant Nos.52025053 and 52105303)the Natural Science Foundation of Jilin Province(Grant No.20220101209JC)the Postdoctoral Fellow-ship Program of CPSF(Grant GZC20240587 and GZC20230944)the Graduate Innovation Fund of Jilin University(2024CX063).
文摘1.Introduction.The Ti6Al4V alloy is extensively utilized across various indus-trial sectors due to its favorable characteristics,such as lightweight design,high strength,and resistance to corrosion[1].In effort s to further reduce weight,functional elements like electric actuators can be substituted with intelligent materials like shape memory alloys(SMAs)[2,3].Among SMAs,NiTi alloy stands out for its sens-ing and actuation capabilities,significantly enhancing the safety and reliability of engineering structures[4,5].Integrating Ti6Al4V and NiTi alloys within a single component holds the potential to provide precise feedback on mechanical,thermal,or environmen-tal conditions[6,7].
