The size and shape effect(SSE)of components has become a critical issue for mechanical properties,application reliability,and processing.In this study,the creep rupture life(CRL)of components with different wall thick...The size and shape effect(SSE)of components has become a critical issue for mechanical properties,application reliability,and processing.In this study,the creep rupture life(CRL)of components with different wall thicknesses and positions in a combustion chamber casing simulator made of K439B superalloy was investigated.The intrinsic mechanisms of the SSE were explored from the dendrite structure,volume fraction and size of theγ'phase,and element segregation,etc.It is shown that this casting exhibits a strong SSE of creep rupture life,characterized by a significant difference in the CRL values up to 60%with the variation of wall thickness and position in the casing.In terms of casting technology,the influence of SSE on CRL is actually determined by the cooling rate.The SSE on the creep rupture life originates from the dendrite structure(such as the secondary dendrite arm spacing),volume fraction size of theγ'phase in the dendrite trunk,and elements segregation rate.This work may have implications for the design and application of engineering components with large sizes and complex structures.展开更多
The experimental study in this paper focuses on the effects of the layer orientation and sample shape on failure strength and fracture pattern of samples tested under Brazilian test conditions(i.e.diametrical loading ...The experimental study in this paper focuses on the effects of the layer orientation and sample shape on failure strength and fracture pattern of samples tested under Brazilian test conditions(i.e.diametrical loading of cylindrical discs)for one particular layered sandstone which is from Modave in the south of Belgium.The variations of the strength in combination with the failure patterns are examined as a function of the inclination angle between the layer plane and the loading direction.The experimental,results clearly show that the induced fracture patterns are a combination of tensile and/or shear fractures.In shape effect experiments the layer thickness and the number of layer boundaries are investigated.Different blocks of Modave sandstone are used to prepare samples.The layer thickness is different among the various blocks,but the layer thickness in each studied rock block can be considered to be constant;hence,the number of layer boundaries changes according to the sample diameter for samples of the same block.The experimental study shows that the layer thickness plays a more important role than the number of layer boundaries per sample.展开更多
Surface charge accumulation and transport on cellular polypropylene play an important role in nanogenerators,which could have a potential impact on energy harvesting and wearable devices for zero carbon energy systems...Surface charge accumulation and transport on cellular polypropylene play an important role in nanogenerators,which could have a potential impact on energy harvesting and wearable devices for zero carbon energy systems and the internet of things.Different shapes have different charge accumulation and decay characteristics of the polymer.Therefore,we studied the influence of the sample’s shape on the surface charge decay by experiment and modeling.The surface potential of square and circular cellular polypropylene was measured by a two-dimensional surface potential measurement system with electrostatic capacitive probe.The experimental result shows that the surface potential distribution of the square sample dissipates non-uniformly from the bell shape to a one-sided collapsed shape,while that of the circular sample dissipates uniformly from the bell shape to the crater-like shape.Moreover,the simulated results of the initial surface potential distributions of the square and circular cellular polypropylene are consistent with the experimental results.The investigation demonstrates that the charge transport process is correlated with the shape of the sample,which provides significant reference for designing electret material used for highly efficient nanogenerators.展开更多
A simplified model was developed to describe the Curie temperature suppression of ferromagnetic nanoparticles. Based on a size and shape dependent model of cohesive energy, the critical temperature variations of ferro...A simplified model was developed to describe the Curie temperature suppression of ferromagnetic nanoparticles. Based on a size and shape dependent model of cohesive energy, the critical temperature variations of ferromagnetic nanoparticles were deduced. It is predicted that the Curie temperature of nanoparticles depends on both size and shape conditions, among which the temperature suppression is strongly influenced by the particle size and the shape effect is comparably minor. The calculation values for freestanding nanoparticles are in good agreement with other theoretical model and the experimental results. The model is also potential for predictions for the nanoparticles embedded in different substrates.展开更多
The emergence of additive manufacturing technology,particularly laser powder bed fusion,has revitalized NiTi alloy production.However,challenges arise regarding its mechanical properties and diminishing shape memory e...The emergence of additive manufacturing technology,particularly laser powder bed fusion,has revitalized NiTi alloy production.However,challenges arise regarding its mechanical properties and diminishing shape memory effect,which hinder its widespread application.Heat treatment has been identified as a method to enhance the performance of metallic materials in the realm of additive manufacturing.This process eliminates residual stress and enhances performance through precipitation strengthening.This study conducted a comprehensive annealing investigation on NiTi alloys to explore the impact of annealing time and temperature on the phase transformation behavior and shape memory performance.The mechanism underlying the performance enhancement was analyzed using scanning electron microscopy,energy-dispersive X-ray spectroscopy,electron backscatter diffraction,and transmission electron microscopy.The findings revealed that different annealing conditions resulted in multistep phase transformation behavior,with the 500℃-5 h sample exhibiting the best mechanical properties owing to the formation of nanoscale dispersed precipitates like Ni_(4)Ti_(3).However,higher temperatures led to larger precipitates,significantly weakening the properties of the NiTi alloy.Additionally,the annealing treatment did not have a notable impact on the grain size,texture strength,or direction.This study provides valuable insights for optimizing the heat treatment process of LPBF-NiTi alloys.展开更多
With the development of radioactive-ion-beam facilities,many exotic phenomena have been discovered or predicted in the nuclei far from the stability line,including cluster structure,shell structure,deformed halo,and s...With the development of radioactive-ion-beam facilities,many exotic phenomena have been discovered or predicted in the nuclei far from the stability line,including cluster structure,shell structure,deformed halo,and shape decoupling effects.The study of exotic nuclear phenomena is at the frontier of nuclear physics nowadays.The covariant density functional theory(CDFT)is one of the most successful microscopic models in describing the structure of nuclei in almost the whole nuclear chart.Within the framework of CDFT,toward a proper treatment of deformation and weak binding,the deformed relativistic Hartree-Bogoliubov theory in continuum(DRHBc)has been developed.In this contribution,we review the applications and extensions of the DRHBc theory to the study of exotic nuclei.The DRHBc theory has been used to investigate the deformed halos in B,C,Ne,Na,and Mg isotopes and the theoretical descriptions are reasonably consistent with available data.A DRHBc Mass Table Collaboration has been founded,aiming at a high precision nuclear mass table with deformation and continuum effects included,which is underway.By implementing the angular momentum projection based on the DRHBc theory,the rotational excitations of deformed halos have been investigated and it is shown that the deformed halos and shape decoupling effects also exist in the low-lying rotational excitation states of deformed halo nuclei.展开更多
The inelastic deformations of shape memory alloys(SMAs)always show poor controllability due to the avalanche-like martensite transformation,and the effective control for the deformation of precision de-vices has been ...The inelastic deformations of shape memory alloys(SMAs)always show poor controllability due to the avalanche-like martensite transformation,and the effective control for the deformation of precision de-vices has been not yet mature.In this work,the phase field method was used to investigate the shape memory effects(SMEs)of NiTi SMAs undergoing grain size(GS)engineering,to obtain tunable one-way and stress-assisted two-way SMEs(OWSME and SATWSME).The OWSME and SATWSME of the systems with various gradient-nanograin structures and bimodal grain structure,as well as that with geometric gradients were simulated.The simulated results indicate that due to the GS dependences of martensite transformation and reorientation,the occurrence and expansion of martensite reorientation,martensite transformation and its reverse can be efficaciously controlled via the GS engineering.When combining the GS engineering and geometric gradient design,since the effects of GS and stress gradient can be su-perimposed or competing,and the responses of martensite reorientation,martensite transformation and its reverse to this are different,the OWSME and SATWSME of the geometrically graded systems with various nanograin structures can exhibit different improvements in controllability.In short,the reorienta-tion hardening modulus during OWSME is increased and the transformation temperature window during SATWSME is widened by GS engineering,indicating the improved controllability of SMEs.The optimal GS engineering schemes revealed in this work provide the basic reference and guidance for designing tun-able SMEs and producing NiTi-based driving devices catering to desired functional performance in various engineering fields.展开更多
The two-way shape memory effect in a Ti-18.5Zr-10Nb-3.5Ta high-temperature shape memory alloy was investigated.X-ray diffraction measurem ent shows that the alloy is composed of orthorhombicα"-martensite.ωphase...The two-way shape memory effect in a Ti-18.5Zr-10Nb-3.5Ta high-temperature shape memory alloy was investigated.X-ray diffraction measurem ent shows that the alloy is composed of orthorhombicα"-martensite.ωphase is not found in Ti-18.5Zr-10Nb-3.5Ta alloy due to the suppressing effect of Ta element.Theα"-martensite laths are found in the transmission electron microscope observation;after the bending deformation,there appear a lot of dislocations.The alloy exhibits a shape memory strain of 3.8%aud a high reverse martensite transformation start temperature of 464 K.The maximum two-way shape memory strain of 1.2%is obtained in the alloy with the prebending training strain of 10%.The mechanism can be ascribed to the effect of internal stress field caused by dislocations.展开更多
In this work,a three-dimensional crystal-plasticity-based phase-field model considering three kinds of inelastic deformation mechanisms,i.e.,martensitic transformation,dislocation slip in austenite,and dislocation sli...In this work,a three-dimensional crystal-plasticity-based phase-field model considering three kinds of inelastic deformation mechanisms,i.e.,martensitic transformation,dislocation slip in austenite,and dislocation slip in martensite,is established to simulate the stress-assisted two-way shape memory effect(SATWSME)of NiTi single crystals and its cyclic degradation.The simulation results show that the ability of the SATWSME of NiTi single crystal increases as increasing the constant stress in the range discussed in this work(10–100 MPa),which is due to the increase of reoriented martensite formed in the cooling process due to the enhanced variant-selection capability of increased constant stress.The martensitic transformation and its reverse in the cyclic process reflecting the SATWSME show more and more obvious localization characteristics,resulting in the accumulation of significantly heterogeneous plastic deformation(mainly caused by the dislocation slip in austenite),which leads to the cyclic degradation of SATWSME.The simulation results and the conclusions drawn from this work are helpful for further understanding the mechanism of functional cyclic degradation of NiTi alloys.展开更多
Significant two-way shape memory effect(TWSME)was achieved in single crystals of single-phase multielement Ni42-x Cu8 Cox Mn37 Ga13(8≤x≤12)alloys by performing thermomechanical training.However,anomalous dependence ...Significant two-way shape memory effect(TWSME)was achieved in single crystals of single-phase multielement Ni42-x Cu8 Cox Mn37 Ga13(8≤x≤12)alloys by performing thermomechanical training.However,anomalous dependence of the martensitic transformation temperature span on Co content was observed.Before training,quite a narrow temperature span of the martensitic transformation,nearly independent of the Co content,was observed in all single crystals.After training the temperature span was still narrow for 8≤x≤10.9 but was obviously expanded for 10.9<x≤12.High-resolution transmission electron microscopy revealed that at the atomic scale,there exists incommensurate modulated structure in the single phase single crystals,as evidenced by nonperiodic satellite spots in the selected area electronic diffraction patterns.Moreover,the modulated wave vector of the satellite spots was increased by higher Co contents.Combining first principal calculations it was considered that the incommensurate modulated structure originates from the formation of Co-Co pairs.After training arrays of ordered dislocations with the same Burgers vector were introduced for 8≤x≤10.9 but the network of dislocations was formed for 10.9<x≤12.Based on analysis of transmission electron microscopy,geometric phase,thermodynamics,and Landau theory,it was considered that the austenite/martensite phase interface was pinned by the network of dislocations,expanding the temperature span of the martensitic transformation.This work supplies new insights for understanding the microstructure and martensitic transformation of Ni-Mn-Ga-based alloys.展开更多
Metamaterials,owing to their exceptional physical characteristics that are absent in natural materials,have emerged as a crucial constituent of intelligent devices and systems.However,there are still significant chall...Metamaterials,owing to their exceptional physical characteristics that are absent in natural materials,have emerged as a crucial constituent of intelligent devices and systems.However,there are still significant challenges that necessitate immediate attention,as they have considerably constrained the applicability of metamaterials,including fixed mechanical properties post-fabrication and restricted design freedom.Here,thermo-responsive,photo-responsive,electro-responsive,and magneto-responsive shape memory polymer nano-composites were developed,and shape memory gradient metamaterials were fabricated using multi-material 4D printing technology.The correlation mechanism between the design parameters and the mechanical properties of multi-responsive gradient metamaterials was systematically analyzed,and the highly designable and programmable configuration and mechanical properties of the gradient metamaterials were realized.More importantly,4D printed multi-responsive shape memory polymer gradient metamaterials can be programmed in situ without additional infrastructure for multi-functional mechanical functions,paving the way for the realization of multiple functions of a single structure.Based on the multi-responsive gradient metamaterials,4D printed digital pixel metamaterial intelligent information carriers were fabricated,featuring customizable encryption and decryption protocols,exceptional scalability,and reusability.Additionally,4D printed gradient metamaterial logic gate electronic devices were developed,which were anticipated to contribute to the development of smart,adaptable robotic systems that combine sensing,actuation,and decision-making capabilities.展开更多
Natural diatomite （DT） is the ancient deposit of diatom skeleton with many regular pores of 50-200 nm and also an abundant source of biogenic silica. Although silica is considered biologically safe and there is an i...Natural diatomite （DT） is the ancient deposit of diatom skeleton with many regular pores of 50-200 nm and also an abundant source of biogenic silica. Although silica is considered biologically safe and there is an increasing interest of using natural diatomite for biomedical applications, the toxicity information about natural diatomite is still missing. Here, cytotoxicity of natural diatomite on osteoblasts and fibroblasts were compared to hydroxyapatite and the relationships between cytotoxicity and diatomite sizes, dose, geometry or impurity were systematically investigated. Cell adhesion and interaction with diatomite particles were also fluorescently observed, The results clearly suggested a size-, dose- and shape-dependent cytotoxicity of natural diatomite. Disk-shaped diatomite particles with average size of 30μm in diameter revealed the least toxicity, while the diatomite particles with irregular shapes and sizes less than 10 μm were remarkably toxic. Diatomite particles with proper sizes were then selected to investigate the reinforcing effect on injectable calcium phosphate bone cement. Results showed that diatomite significantly improved the compressive strength of bone cement but did not alter the injectability of the cement, This work provided important biocompatibility information of natural diatomite and demonstrated the feasibility of using selected diatomite as bone implant material.展开更多
SMPU （shape memory polyurethane） non-ionomers and ionomers, synthesized with poly（c-caprolactone） （PCL）, 4, 4＇-diphenylmethane diisocyanate （MDI）, 1,4-butanediol （BDO）, dimethylolpropionic acid （DMPA） wer...SMPU （shape memory polyurethane） non-ionomers and ionomers, synthesized with poly（c-caprolactone） （PCL）, 4, 4＇-diphenylmethane diisocyanate （MDI）, 1,4-butanediol （BDO）, dimethylolpropionic acid （DMPA） were measured with cyclic tensile test and strain recovery test. The relations between the structure and shape memory effect of these two series were studied with respect to the ionic group content and the effect of neutralization. The resulting data indicate that, with the introduction of asymmetrical extender, the stress at 100% elongation is decreased for PU non-ionomer and ionomer series, especially lowered sharply for non-ionomer series; the fixation ratio of ionomer series is not affected obviously by the ionic group content; the total recovery ratio of ionomer series is decreased greatly. After sufficient relaxation time for samples stretched beforehand, the switching temperature is raised slightly, whereas the recovery ratio measured with strain recovery test method is lowered with increased DMPA content. The characterization with FT-IR, DSC, DMA elucidated that, the ordered hard domain of the two series is disrupted with the introduction of DMPA which causes more hard segments to dissolve in soft phase; ionic groups on hard segment enhance the cohesion between hard segments especially at high ionic group content and significantly facilitate the phase separation compared with the corresponding non-ionomer at moderate ionic group content.展开更多
A macroscopic based multi-mechanism constitutive model is constructed in the framework of irreversible thermodynamics to describe the degeneration of shape memory effect occurring in the thermo-mechanical cyclic defor...A macroscopic based multi-mechanism constitutive model is constructed in the framework of irreversible thermodynamics to describe the degeneration of shape memory effect occurring in the thermo-mechanical cyclic deformation of NiTi shape memory alloys (SMAs). Three phases, austenite A, twinned martensite and detwinned martensite , as well as the phase transitions occurring between each pair of phases (, , , , and are considered in the proposed model. Meanwhile, two kinds of inelastic deformation mechanisms, martensite transformation-induced plasticity and reorientation-induced plasticity, are used to explain the degeneration of shape memory effects of NiTi SMAs. The evolution equations of internal variables are proposed by attributing the degeneration of shape memory effect to the interaction between the three phases (A, , and and plastic deformation. Finally, the capability of the proposed model is verified by comparing the predictions with the experimental results of NiTi SMAs. It is shown that the degeneration of shape memory effect and its dependence on the loading level can be reasonably described by the proposed model.展开更多
Isolated pillars in underground mines are subjected to uniaxial stress,and the load bearing cross-section of pillars is commonly rectangularly shaped.In addition,the uniaxial compression test(UCT)is widely used for de...Isolated pillars in underground mines are subjected to uniaxial stress,and the load bearing cross-section of pillars is commonly rectangularly shaped.In addition,the uniaxial compression test(UCT)is widely used for determining the basic mechanical properties of rocks and revealing the mechanism of isolated pillar disasters under unidimensional stress.The shape effects of rock mechanical properties under uniaxial compression are mainly quantitatively reflected in the specific shape ratios of rocks.Therefore,it is necessary to study the detailed shape ratio effects on the mechanical properties of rectangular prism rock specimens and isolated pillars under uniaxial compressive stress.In this study,granite,marble and sandstone rectangular prism specimens with various height to width ratios(r)and width to thickness ratios(u)were prepared and tested.The study results show that r and u have a great influence on the bearing ability of rocks,and thin or high rocks have lower uniaxial compressive strength.Reducing the level of r can enhance the u effect on the strength of rocks,and increasing the level of u can enhance the r effect on the strength of rocks.The lateral strain on the thickness side of the rock specimen is larger than that on the width side,which implies that crack growth occurs easily on the thickness side.Considering r and u,a novel strength prediction model of isolated pillars was proposed based on the testing results,and the prediction model was used for the safety assessment of 179 isolated pillars in the Xianglu Mountain Tungsten Mine.展开更多
Laser additive manufacturing (AM) of lattice structures with light weight, excellent impact resistance, and energy absorption performance is receiving considerable attention in aerospace, transportation, and mechanica...Laser additive manufacturing (AM) of lattice structures with light weight, excellent impact resistance, and energy absorption performance is receiving considerable attention in aerospace, transportation, and mechanical equipment application fields. In this study, we designed four gradient lattice structures (GLSs) using the topology optimization method, including the unidirectional GLS, the bi-directional increasing GLS, the bi-directional decreasing GLS and the none-GLS. All GLSs were manufactureed by laser powder bed fusion (LPBF). The uniaxial compression tests and finite element analysis were conducted to investigate the influence of gradient distribution features on deformation modes and energy absorption performance of GLSs. The results showed that, compared with the 45° shear fracture characteristic of the none-GLS, the unidirectional GLS, the bi-directional increasing GLS and the bi-directional decreasing GLS had the characteristics of the layer-by-layer fracture, showing considerably improved energy absorption capacity. The bi-directional increasing GLS showed a unique combination of shear fracture and layer-by-layer fracture, having the optimal energy absorption performance with energy absorption and specific energy absorption of 235.6 J and 9.5 J g-1 at 0.5 strain, respectively. Combined with the shape memory effect of NiTi alloy, multiple compression-heat recovery experiments were carried out to verify the shape memory function of LPBF-processed NiTi GLSs. These findings have potential value for the future design of GLSs and the realization of shape memory function of NiTi components through laser AM.展开更多
Shape memory polymers(SMPs)usually have a one-way shape memory effect.In this paper,an easy-operating method to realize a two-way shape memory effect was demonstrated in a ring-shaped bilayer structure where the two l...Shape memory polymers(SMPs)usually have a one-way shape memory effect.In this paper,an easy-operating method to realize a two-way shape memory effect was demonstrated in a ring-shaped bilayer structure where the two layers are SMPs with different thermal transition temperatures.By designing specific thermomechanical processes,the mismatched deformation between the two layers leads to a morphology change of ring-shaped bilayer structures from a smooth ring to a gear-like buckling shape under cooling and a reversible recovery to the smooth shape under heating.Such a morphology change is ascribed to occurrence and recovery of thermoelastic buckling.This method was validated by finite element simulation.We experimentally investigated the influence of pre-strain on buckling,and it was found that both the buckling occurrence and recovery temperature vary with pre-strain.Furthermore,considering a ring-shaped SMP-SMP bilayer structure,finite element analysis was conducted to study the influence of film thickness and modulus ratio of two layers on buckling behavior.The results showed that the critical buckling wavelength was greatly influenced by film thickness and modulus ratio.W e made a theoretical analysis that accorded well with the numerical results.展开更多
The influence of aging on the microstructure and mechanical properties of Cu-11.6wt%Al-3.9wt%Ni-2.5wt%Mn shape memory alloy（SMA） was studied by means of scanning electron microscopy（SEM）,transmission electron micr...The influence of aging on the microstructure and mechanical properties of Cu-11.6wt%Al-3.9wt%Ni-2.5wt%Mn shape memory alloy（SMA） was studied by means of scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,X-ray diffractometer,and differential scanning calorimeter（DSC）.Experimental results show that bainite,γ2,and α phase precipitates occur with the aging effect in the alloy.After aging at 300°C,the bainitic precipitates appear at the early stages of aging,while the precipitates of γ2 phase are observed for a longer aging time.When the aging temperature increases,the bainite gradually evolves into γ2 phase and equilibrium α phase（bcc） precipitates from the remaining parent phase.Thus,the bainite,γ2,and α phases appear,while the martensite phase disappears progressively in the alloy.The bainitic precipitates decrease the reverse transformation temperature while the γ2 phase precipitates increase these temperatures with a decrease of solute content in the retained parent phase.On the other hand,these precipitations cause an increasing in hardness of the alloy.展开更多
A NiTi shape memory alloy （SMA） modified by Ta ion implantation was subjected to oxidation treatment in air at 723 and 873 K. Atomic force microscopy （AFM）, Auger electron spectroscopy （AES）, and grazing inciden...A NiTi shape memory alloy （SMA） modified by Ta ion implantation was subjected to oxidation treatment in air at 723 and 873 K. Atomic force microscopy （AFM）, Auger electron spectroscopy （AES）, and grazing incidence X-ray diffraction （GIXRD） measurements were conducted to investigate the surface characteristics, including surface topography, elemental depth profiles, and surface phase structures. The surface roughness of the Ta-implanted NiTi increases after oxidation, and the higher the oxidation temperature is, the larger the value is. The surface of the Ta-implanted NiTi oxidized at 723 K is a nanolayer mainly composed of TiO2/Ta2O5 and TiO with depressed Ni content. The Ta-implanted NiTi oxidized at 873 K is mainly covered by rutile TiO2 in several micrometers of thickness. Potentiodynamic polarization tests indicated that the corrosion resistance of the Ta-implanted NiTi was improved after thermal oxidation at 723 K, but a negative impact was found for the Ta-implanted NiTi oxidized at 873 K.展开更多
基金financially supported by the National Science and Technology Major Project of China (No.J2019-VI-0004-0117)a Laboratory Fund Project (6142903220101)。
文摘The size and shape effect(SSE)of components has become a critical issue for mechanical properties,application reliability,and processing.In this study,the creep rupture life(CRL)of components with different wall thicknesses and positions in a combustion chamber casing simulator made of K439B superalloy was investigated.The intrinsic mechanisms of the SSE were explored from the dendrite structure,volume fraction and size of theγ'phase,and element segregation,etc.It is shown that this casting exhibits a strong SSE of creep rupture life,characterized by a significant difference in the CRL values up to 60%with the variation of wall thickness and position in the casing.In terms of casting technology,the influence of SSE on CRL is actually determined by the cooling rate.The SSE on the creep rupture life originates from the dendrite structure(such as the secondary dendrite arm spacing),volume fraction size of theγ'phase in the dendrite trunk,and elements segregation rate.This work may have implications for the design and application of engineering components with large sizes and complex structures.
基金The fnancial support of the Research Council of the Katholieke Universiteit Leuven(OT-project OT/03/35)
文摘The experimental study in this paper focuses on the effects of the layer orientation and sample shape on failure strength and fracture pattern of samples tested under Brazilian test conditions(i.e.diametrical loading of cylindrical discs)for one particular layered sandstone which is from Modave in the south of Belgium.The variations of the strength in combination with the failure patterns are examined as a function of the inclination angle between the layer plane and the loading direction.The experimental,results clearly show that the induced fracture patterns are a combination of tensile and/or shear fractures.In shape effect experiments the layer thickness and the number of layer boundaries are investigated.Different blocks of Modave sandstone are used to prepare samples.The layer thickness is different among the various blocks,but the layer thickness in each studied rock block can be considered to be constant;hence,the number of layer boundaries changes according to the sample diameter for samples of the same block.The experimental study shows that the layer thickness plays a more important role than the number of layer boundaries per sample.
基金supported by National Natural Science Foundation of China(NSFC)(Nos.52050410346,51877031,62061136009)the Ministry of Science and Technology(No.QNJ2021041001)+3 种基金the high-level talents plan of Shaanxi provincethe‘Belt and Road Initiative’Overseas Expertise Introduction Center for Smart Energy and Reliability of Transmission and Distribution Equipment of Shaanxi Provincethe Advanced Foreign Researcher Promotion Program of Ministry of Education,Culture,Sports,Science and Technology of Japan(MEXT)Fukuoka University。
文摘Surface charge accumulation and transport on cellular polypropylene play an important role in nanogenerators,which could have a potential impact on energy harvesting and wearable devices for zero carbon energy systems and the internet of things.Different shapes have different charge accumulation and decay characteristics of the polymer.Therefore,we studied the influence of the sample’s shape on the surface charge decay by experiment and modeling.The surface potential of square and circular cellular polypropylene was measured by a two-dimensional surface potential measurement system with electrostatic capacitive probe.The experimental result shows that the surface potential distribution of the square sample dissipates non-uniformly from the bell shape to a one-sided collapsed shape,while that of the circular sample dissipates uniformly from the bell shape to the crater-like shape.Moreover,the simulated results of the initial surface potential distributions of the square and circular cellular polypropylene are consistent with the experimental results.The investigation demonstrates that the charge transport process is correlated with the shape of the sample,which provides significant reference for designing electret material used for highly efficient nanogenerators.
基金Project(FY2006) supported by the JSPS Postdoctoral Fellowship For Foreign ResearchesProject supported by the 21st Century COE Program, "Mechanical Systems Innovation," by the Ministry of Education, Culture, Sports, Science and Technology, Japan
文摘A simplified model was developed to describe the Curie temperature suppression of ferromagnetic nanoparticles. Based on a size and shape dependent model of cohesive energy, the critical temperature variations of ferromagnetic nanoparticles were deduced. It is predicted that the Curie temperature of nanoparticles depends on both size and shape conditions, among which the temperature suppression is strongly influenced by the particle size and the shape effect is comparably minor. The calculation values for freestanding nanoparticles are in good agreement with other theoretical model and the experimental results. The model is also potential for predictions for the nanoparticles embedded in different substrates.
基金supported by National Key R&D Program of China(Grant No.2022YFB4601701)74th Batch of General Funding from the China Postdoctoral Science Foundation(Grant No.2023M741341)+7 种基金5th Batch of Special Grants from the China Postdoctoral Science Foundation(before the station,Grant No.2023TQ0129)Postdoctoral Fellowship Program of CPSF(Grant No.GZB20230257)National Natural Science Foundation of China(Grant Nos.52375289,52205310)Natural Science Foundation of Shandong Province(Grant No.ZR2021QE263)Science and Technology Development Program of Jilin Province(Grant No.20230508045RC)Capital Construction Fund plan within the budget of Jilin Province(Grant No.2023C041-4)Chongqing Natural Science Foundation(Grant No.CSTB2022NSCQ-MSX0225)the Shandong Postdoctoral Science Foundation(Grant No.SDCX-ZG-202400238).
文摘The emergence of additive manufacturing technology,particularly laser powder bed fusion,has revitalized NiTi alloy production.However,challenges arise regarding its mechanical properties and diminishing shape memory effect,which hinder its widespread application.Heat treatment has been identified as a method to enhance the performance of metallic materials in the realm of additive manufacturing.This process eliminates residual stress and enhances performance through precipitation strengthening.This study conducted a comprehensive annealing investigation on NiTi alloys to explore the impact of annealing time and temperature on the phase transformation behavior and shape memory performance.The mechanism underlying the performance enhancement was analyzed using scanning electron microscopy,energy-dispersive X-ray spectroscopy,electron backscatter diffraction,and transmission electron microscopy.The findings revealed that different annealing conditions resulted in multistep phase transformation behavior,with the 500℃-5 h sample exhibiting the best mechanical properties owing to the formation of nanoscale dispersed precipitates like Ni_(4)Ti_(3).However,higher temperatures led to larger precipitates,significantly weakening the properties of the NiTi alloy.Additionally,the annealing treatment did not have a notable impact on the grain size,texture strength,or direction.This study provides valuable insights for optimizing the heat treatment process of LPBF-NiTi alloys.
文摘With the development of radioactive-ion-beam facilities,many exotic phenomena have been discovered or predicted in the nuclei far from the stability line,including cluster structure,shell structure,deformed halo,and shape decoupling effects.The study of exotic nuclear phenomena is at the frontier of nuclear physics nowadays.The covariant density functional theory(CDFT)is one of the most successful microscopic models in describing the structure of nuclei in almost the whole nuclear chart.Within the framework of CDFT,toward a proper treatment of deformation and weak binding,the deformed relativistic Hartree-Bogoliubov theory in continuum(DRHBc)has been developed.In this contribution,we review the applications and extensions of the DRHBc theory to the study of exotic nuclei.The DRHBc theory has been used to investigate the deformed halos in B,C,Ne,Na,and Mg isotopes and the theoretical descriptions are reasonably consistent with available data.A DRHBc Mass Table Collaboration has been founded,aiming at a high precision nuclear mass table with deformation and continuum effects included,which is underway.By implementing the angular momentum projection based on the DRHBc theory,the rotational excitations of deformed halos have been investigated and it is shown that the deformed halos and shape decoupling effects also exist in the low-lying rotational excitation states of deformed halo nuclei.
基金The National Natural Science Foundation of China(12022208)the Project funded by China Postdoctoral Science Foundation(2022M712243)the Fundamental Research Funds for the Cen-tral Universities are acknowledged.
文摘The inelastic deformations of shape memory alloys(SMAs)always show poor controllability due to the avalanche-like martensite transformation,and the effective control for the deformation of precision de-vices has been not yet mature.In this work,the phase field method was used to investigate the shape memory effects(SMEs)of NiTi SMAs undergoing grain size(GS)engineering,to obtain tunable one-way and stress-assisted two-way SMEs(OWSME and SATWSME).The OWSME and SATWSME of the systems with various gradient-nanograin structures and bimodal grain structure,as well as that with geometric gradients were simulated.The simulated results indicate that due to the GS dependences of martensite transformation and reorientation,the occurrence and expansion of martensite reorientation,martensite transformation and its reverse can be efficaciously controlled via the GS engineering.When combining the GS engineering and geometric gradient design,since the effects of GS and stress gradient can be su-perimposed or competing,and the responses of martensite reorientation,martensite transformation and its reverse to this are different,the OWSME and SATWSME of the geometrically graded systems with various nanograin structures can exhibit different improvements in controllability.In short,the reorienta-tion hardening modulus during OWSME is increased and the transformation temperature window during SATWSME is widened by GS engineering,indicating the improved controllability of SMEs.The optimal GS engineering schemes revealed in this work provide the basic reference and guidance for designing tun-able SMEs and producing NiTi-based driving devices catering to desired functional performance in various engineering fields.
基金financially supported by the National Natural Science Foundation of China(No.51371016)the Fundamental Research Funds for the Central Universities(Nos.YWF-16-BJ-J-49 and YWF-17-BJ-J-23)。
文摘The two-way shape memory effect in a Ti-18.5Zr-10Nb-3.5Ta high-temperature shape memory alloy was investigated.X-ray diffraction measurem ent shows that the alloy is composed of orthorhombicα"-martensite.ωphase is not found in Ti-18.5Zr-10Nb-3.5Ta alloy due to the suppressing effect of Ta element.Theα"-martensite laths are found in the transmission electron microscope observation;after the bending deformation,there appear a lot of dislocations.The alloy exhibits a shape memory strain of 3.8%aud a high reverse martensite transformation start temperature of 464 K.The maximum two-way shape memory strain of 1.2%is obtained in the alloy with the prebending training strain of 10%.The mechanism can be ascribed to the effect of internal stress field caused by dislocations.
基金The National Natural Science Foundation of China(12202294,12022208,and 12322203)the Project funded by China Postdoctoral Science Foundation(2022M712243)the Fundamental Research Funds for the Central Universities(2023SCU12098)are acknowledged.
文摘In this work,a three-dimensional crystal-plasticity-based phase-field model considering three kinds of inelastic deformation mechanisms,i.e.,martensitic transformation,dislocation slip in austenite,and dislocation slip in martensite,is established to simulate the stress-assisted two-way shape memory effect(SATWSME)of NiTi single crystals and its cyclic degradation.The simulation results show that the ability of the SATWSME of NiTi single crystal increases as increasing the constant stress in the range discussed in this work(10–100 MPa),which is due to the increase of reoriented martensite formed in the cooling process due to the enhanced variant-selection capability of increased constant stress.The martensitic transformation and its reverse in the cyclic process reflecting the SATWSME show more and more obvious localization characteristics,resulting in the accumulation of significantly heterogeneous plastic deformation(mainly caused by the dislocation slip in austenite),which leads to the cyclic degradation of SATWSME.The simulation results and the conclusions drawn from this work are helpful for further understanding the mechanism of functional cyclic degradation of NiTi alloys.
基金support from the National Key Research and Development Program of China(Grant No.2021YFB3501402)the National Natural Science Foundation of China(Grant Nos.52250313 and 52121001)Yang Liu and Chen Si acknowledge financial support from the National Natural Science Foundation of China(Grant No.12274013).
文摘Significant two-way shape memory effect(TWSME)was achieved in single crystals of single-phase multielement Ni42-x Cu8 Cox Mn37 Ga13(8≤x≤12)alloys by performing thermomechanical training.However,anomalous dependence of the martensitic transformation temperature span on Co content was observed.Before training,quite a narrow temperature span of the martensitic transformation,nearly independent of the Co content,was observed in all single crystals.After training the temperature span was still narrow for 8≤x≤10.9 but was obviously expanded for 10.9<x≤12.High-resolution transmission electron microscopy revealed that at the atomic scale,there exists incommensurate modulated structure in the single phase single crystals,as evidenced by nonperiodic satellite spots in the selected area electronic diffraction patterns.Moreover,the modulated wave vector of the satellite spots was increased by higher Co contents.Combining first principal calculations it was considered that the incommensurate modulated structure originates from the formation of Co-Co pairs.After training arrays of ordered dislocations with the same Burgers vector were introduced for 8≤x≤10.9 but the network of dislocations was formed for 10.9<x≤12.Based on analysis of transmission electron microscopy,geometric phase,thermodynamics,and Landau theory,it was considered that the austenite/martensite phase interface was pinned by the network of dislocations,expanding the temperature span of the martensitic transformation.This work supplies new insights for understanding the microstructure and martensitic transformation of Ni-Mn-Ga-based alloys.
基金supported by the National Key R&D Program of China(2022YFB3805700)the National Natural Science Foundation of China(Grant No.12302198)+2 种基金China Postdoctoral Science Foundation(2022M720042)Heilongjiang Postdoctoral Science Foundation(LBH-Z22016)Key Project of Heilongjiang Provincial Department of Science and Technology(2022ZX02C25).
文摘Metamaterials,owing to their exceptional physical characteristics that are absent in natural materials,have emerged as a crucial constituent of intelligent devices and systems.However,there are still significant challenges that necessitate immediate attention,as they have considerably constrained the applicability of metamaterials,including fixed mechanical properties post-fabrication and restricted design freedom.Here,thermo-responsive,photo-responsive,electro-responsive,and magneto-responsive shape memory polymer nano-composites were developed,and shape memory gradient metamaterials were fabricated using multi-material 4D printing technology.The correlation mechanism between the design parameters and the mechanical properties of multi-responsive gradient metamaterials was systematically analyzed,and the highly designable and programmable configuration and mechanical properties of the gradient metamaterials were realized.More importantly,4D printed multi-responsive shape memory polymer gradient metamaterials can be programmed in situ without additional infrastructure for multi-functional mechanical functions,paving the way for the realization of multiple functions of a single structure.Based on the multi-responsive gradient metamaterials,4D printed digital pixel metamaterial intelligent information carriers were fabricated,featuring customizable encryption and decryption protocols,exceptional scalability,and reusability.Additionally,4D printed gradient metamaterial logic gate electronic devices were developed,which were anticipated to contribute to the development of smart,adaptable robotic systems that combine sensing,actuation,and decision-making capabilities.
基金financially supported by the National Natural Science Foundation of China(Nos.81622032,51672184,51525101and 51472279)the Priority Academic Program Development of Jiangsu High Education Institutions(PAPD)+2 种基金the Jiangsu Innovation and Entrepreneurship Program,the National Basic Research Program of China(973 Program,No.2014CB748600)the Jiangsu Provincial Special Program of Medical Science(No.BL2012004)the Jiangsu Six Peak of Talents Program(No.2013-WSW-056)
文摘Natural diatomite （DT） is the ancient deposit of diatom skeleton with many regular pores of 50-200 nm and also an abundant source of biogenic silica. Although silica is considered biologically safe and there is an increasing interest of using natural diatomite for biomedical applications, the toxicity information about natural diatomite is still missing. Here, cytotoxicity of natural diatomite on osteoblasts and fibroblasts were compared to hydroxyapatite and the relationships between cytotoxicity and diatomite sizes, dose, geometry or impurity were systematically investigated. Cell adhesion and interaction with diatomite particles were also fluorescently observed, The results clearly suggested a size-, dose- and shape-dependent cytotoxicity of natural diatomite. Disk-shaped diatomite particles with average size of 30μm in diameter revealed the least toxicity, while the diatomite particles with irregular shapes and sizes less than 10 μm were remarkably toxic. Diatomite particles with proper sizes were then selected to investigate the reinforcing effect on injectable calcium phosphate bone cement. Results showed that diatomite significantly improved the compressive strength of bone cement but did not alter the injectability of the cement, This work provided important biocompatibility information of natural diatomite and demonstrated the feasibility of using selected diatomite as bone implant material.
基金This work was supported by Hong Kong ITF research project (No. ITS 098/02).
文摘SMPU （shape memory polyurethane） non-ionomers and ionomers, synthesized with poly（c-caprolactone） （PCL）, 4, 4＇-diphenylmethane diisocyanate （MDI）, 1,4-butanediol （BDO）, dimethylolpropionic acid （DMPA） were measured with cyclic tensile test and strain recovery test. The relations between the structure and shape memory effect of these two series were studied with respect to the ionic group content and the effect of neutralization. The resulting data indicate that, with the introduction of asymmetrical extender, the stress at 100% elongation is decreased for PU non-ionomer and ionomer series, especially lowered sharply for non-ionomer series; the fixation ratio of ionomer series is not affected obviously by the ionic group content; the total recovery ratio of ionomer series is decreased greatly. After sufficient relaxation time for samples stretched beforehand, the switching temperature is raised slightly, whereas the recovery ratio measured with strain recovery test method is lowered with increased DMPA content. The characterization with FT-IR, DSC, DMA elucidated that, the ordered hard domain of the two series is disrupted with the introduction of DMPA which causes more hard segments to dissolve in soft phase; ionic groups on hard segment enhance the cohesion between hard segments especially at high ionic group content and significantly facilitate the phase separation compared with the corresponding non-ionomer at moderate ionic group content.
基金Financial supports by the National Natural Science Foundation of China (Grant 11532010)the project for Sichuan Provincial Youth Science and Technology Innovation Team, China (Grant 2013TD0004)
文摘A macroscopic based multi-mechanism constitutive model is constructed in the framework of irreversible thermodynamics to describe the degeneration of shape memory effect occurring in the thermo-mechanical cyclic deformation of NiTi shape memory alloys (SMAs). Three phases, austenite A, twinned martensite and detwinned martensite , as well as the phase transitions occurring between each pair of phases (, , , , and are considered in the proposed model. Meanwhile, two kinds of inelastic deformation mechanisms, martensite transformation-induced plasticity and reorientation-induced plasticity, are used to explain the degeneration of shape memory effects of NiTi SMAs. The evolution equations of internal variables are proposed by attributing the degeneration of shape memory effect to the interaction between the three phases (A, , and and plastic deformation. Finally, the capability of the proposed model is verified by comparing the predictions with the experimental results of NiTi SMAs. It is shown that the degeneration of shape memory effect and its dependence on the loading level can be reasonably described by the proposed model.
基金funded by the National Natural Science Foundation of China(Nos.51774326,42177164,41807259,and41702350)Hunan Young Talent(No.2021RC3007)+2 种基金the open fund of Mining Disaster Prevention and Control Ministry Key Laboratory at Shandong University of Science and Technology(No.MDPC201917)the Fundamental Research Funds for the Central Universities of Central South University(No.2019zzts668)the Innovation-Driven Project of Central South University(No.2020CX040)。
文摘Isolated pillars in underground mines are subjected to uniaxial stress,and the load bearing cross-section of pillars is commonly rectangularly shaped.In addition,the uniaxial compression test(UCT)is widely used for determining the basic mechanical properties of rocks and revealing the mechanism of isolated pillar disasters under unidimensional stress.The shape effects of rock mechanical properties under uniaxial compression are mainly quantitatively reflected in the specific shape ratios of rocks.Therefore,it is necessary to study the detailed shape ratio effects on the mechanical properties of rectangular prism rock specimens and isolated pillars under uniaxial compressive stress.In this study,granite,marble and sandstone rectangular prism specimens with various height to width ratios(r)and width to thickness ratios(u)were prepared and tested.The study results show that r and u have a great influence on the bearing ability of rocks,and thin or high rocks have lower uniaxial compressive strength.Reducing the level of r can enhance the u effect on the strength of rocks,and increasing the level of u can enhance the r effect on the strength of rocks.The lateral strain on the thickness side of the rock specimen is larger than that on the width side,which implies that crack growth occurs easily on the thickness side.Considering r and u,a novel strength prediction model of isolated pillars was proposed based on the testing results,and the prediction model was used for the safety assessment of 179 isolated pillars in the Xianglu Mountain Tungsten Mine.
基金supported by the financial support from the National Natural Science Foundation of China(Nos.51735005 and U1930207)the Basic Strengthening Program(No.2019-JCJQ-JJ-331)+1 种基金National Natural Science Founda-tion of China for Creative Research Groups(No.51921003)the 15th Batch of‘Six Talents Peaks’Innovative Talents Team Program(No.TD-GDZB-001).
文摘Laser additive manufacturing (AM) of lattice structures with light weight, excellent impact resistance, and energy absorption performance is receiving considerable attention in aerospace, transportation, and mechanical equipment application fields. In this study, we designed four gradient lattice structures (GLSs) using the topology optimization method, including the unidirectional GLS, the bi-directional increasing GLS, the bi-directional decreasing GLS and the none-GLS. All GLSs were manufactureed by laser powder bed fusion (LPBF). The uniaxial compression tests and finite element analysis were conducted to investigate the influence of gradient distribution features on deformation modes and energy absorption performance of GLSs. The results showed that, compared with the 45° shear fracture characteristic of the none-GLS, the unidirectional GLS, the bi-directional increasing GLS and the bi-directional decreasing GLS had the characteristics of the layer-by-layer fracture, showing considerably improved energy absorption capacity. The bi-directional increasing GLS showed a unique combination of shear fracture and layer-by-layer fracture, having the optimal energy absorption performance with energy absorption and specific energy absorption of 235.6 J and 9.5 J g-1 at 0.5 strain, respectively. Combined with the shape memory effect of NiTi alloy, multiple compression-heat recovery experiments were carried out to verify the shape memory function of LPBF-processed NiTi GLSs. These findings have potential value for the future design of GLSs and the realization of shape memory function of NiTi components through laser AM.
基金This work was supported by the National Natural Science Foundations of China(Grant 11272044)the Fundamental Research Funds for the Central Universities(Grant 2018JBM305).
文摘Shape memory polymers(SMPs)usually have a one-way shape memory effect.In this paper,an easy-operating method to realize a two-way shape memory effect was demonstrated in a ring-shaped bilayer structure where the two layers are SMPs with different thermal transition temperatures.By designing specific thermomechanical processes,the mismatched deformation between the two layers leads to a morphology change of ring-shaped bilayer structures from a smooth ring to a gear-like buckling shape under cooling and a reversible recovery to the smooth shape under heating.Such a morphology change is ascribed to occurrence and recovery of thermoelastic buckling.This method was validated by finite element simulation.We experimentally investigated the influence of pre-strain on buckling,and it was found that both the buckling occurrence and recovery temperature vary with pre-strain.Furthermore,considering a ring-shaped SMP-SMP bilayer structure,finite element analysis was conducted to study the influence of film thickness and modulus ratio of two layers on buckling behavior.The results showed that the critical buckling wavelength was greatly influenced by film thickness and modulus ratio.W e made a theoretical analysis that accorded well with the numerical results.
文摘The influence of aging on the microstructure and mechanical properties of Cu-11.6wt%Al-3.9wt%Ni-2.5wt%Mn shape memory alloy（SMA） was studied by means of scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,X-ray diffractometer,and differential scanning calorimeter（DSC）.Experimental results show that bainite,γ2,and α phase precipitates occur with the aging effect in the alloy.After aging at 300°C,the bainitic precipitates appear at the early stages of aging,while the precipitates of γ2 phase are observed for a longer aging time.When the aging temperature increases,the bainite gradually evolves into γ2 phase and equilibrium α phase（bcc） precipitates from the remaining parent phase.Thus,the bainite,γ2,and α phases appear,while the martensite phase disappears progressively in the alloy.The bainitic precipitates decrease the reverse transformation temperature while the γ2 phase precipitates increase these temperatures with a decrease of solute content in the retained parent phase.On the other hand,these precipitations cause an increasing in hardness of the alloy.
基金supported by the National Natural Science Foundation of China (No.50971007)the Program for New Century Excellent Talents in Universities from the Ministry of Education of China (No.NCET-09-0024)
文摘A NiTi shape memory alloy （SMA） modified by Ta ion implantation was subjected to oxidation treatment in air at 723 and 873 K. Atomic force microscopy （AFM）, Auger electron spectroscopy （AES）, and grazing incidence X-ray diffraction （GIXRD） measurements were conducted to investigate the surface characteristics, including surface topography, elemental depth profiles, and surface phase structures. The surface roughness of the Ta-implanted NiTi increases after oxidation, and the higher the oxidation temperature is, the larger the value is. The surface of the Ta-implanted NiTi oxidized at 723 K is a nanolayer mainly composed of TiO2/Ta2O5 and TiO with depressed Ni content. The Ta-implanted NiTi oxidized at 873 K is mainly covered by rutile TiO2 in several micrometers of thickness. Potentiodynamic polarization tests indicated that the corrosion resistance of the Ta-implanted NiTi was improved after thermal oxidation at 723 K, but a negative impact was found for the Ta-implanted NiTi oxidized at 873 K.
