A Shape Memory Polymer Composite(SMPC)is developed by reinforcing an epoxy-based polymer with randomly oriented short glass fibers.Diverging from previous research,which primarily focused on the hot programming of sho...A Shape Memory Polymer Composite(SMPC)is developed by reinforcing an epoxy-based polymer with randomly oriented short glass fibers.Diverging from previous research,which primarily focused on the hot programming of short glass fiber-based SMPCs,this work explores the potential for programming below the glass transition temperature(Tg)for epoxy-based SMPCs.To mitigate the inherent brittleness of the SMPC during deformation,a linear polymer is incorporated,and a temperature between room temperature and Tg is chosen as the deformation temperature to study the shape memory properties.The findings demonstrate an enhancement in shape fixity and recovery stress,alongside a reduction in shape recovery,with the incorporation of short glass fibers.In addition to tensile properties,thermal properties such as thermal conductivity,specific heat capacity,and glass transition temperature are investigated for their dependence on fiber content.Microscopic properties,such as fiber-matrix adhesion and the dispersion of glass fibers,are examined through Scanning Electron Microscope imaging.The fiber length distribution and mean fiber lengths are also measured for different fiber fractions.展开更多
Metamaterials,owing to their exceptional physical characteristics that are absent in natural materials,have emerged as a crucial constituent of intelligent devices and systems.However,there are still significant chall...Metamaterials,owing to their exceptional physical characteristics that are absent in natural materials,have emerged as a crucial constituent of intelligent devices and systems.However,there are still significant challenges that necessitate immediate attention,as they have considerably constrained the applicability of metamaterials,including fixed mechanical properties post-fabrication and restricted design freedom.Here,thermo-responsive,photo-responsive,electro-responsive,and magneto-responsive shape memory polymer nano-composites were developed,and shape memory gradient metamaterials were fabricated using multi-material 4D printing technology.The correlation mechanism between the design parameters and the mechanical properties of multi-responsive gradient metamaterials was systematically analyzed,and the highly designable and programmable configuration and mechanical properties of the gradient metamaterials were realized.More importantly,4D printed multi-responsive shape memory polymer gradient metamaterials can be programmed in situ without additional infrastructure for multi-functional mechanical functions,paving the way for the realization of multiple functions of a single structure.Based on the multi-responsive gradient metamaterials,4D printed digital pixel metamaterial intelligent information carriers were fabricated,featuring customizable encryption and decryption protocols,exceptional scalability,and reusability.Additionally,4D printed gradient metamaterial logic gate electronic devices were developed,which were anticipated to contribute to the development of smart,adaptable robotic systems that combine sensing,actuation,and decision-making capabilities.展开更多
This study explores the phenomenon of shape coexistence in nuclei around^(172)Hg,with a focus on the isotopes^(170)Pt,^(172)Hg,and^(174)Pb,as well as the^(170)Pt to^(180)Pt isotopic chain.Utilizing a macro-microscopic...This study explores the phenomenon of shape coexistence in nuclei around^(172)Hg,with a focus on the isotopes^(170)Pt,^(172)Hg,and^(174)Pb,as well as the^(170)Pt to^(180)Pt isotopic chain.Utilizing a macro-microscopic approach that incorporates the Lublin-Strasbourg Drop model combined with a Yukawa-Folded potential and pairing corrections,we analyze the potential energy surfaces(PESs)to understand the impact of pairing interaction.For^(170)Pt,the PES exhibited a prolate ground state,with additional triaxial and oblate-shaped isomers.In^(172)Hg,the ground-state deformation transitions from triaxial to oblate with increasing pairing interaction,demonstrating its nearlyγ-unstable nature.Three shape isomers(prolate,triaxial,and oblate)were observed,with increased pairing strength leading to the disappearance of the triaxial isomer.^(174)Pb exhibited a prolate ground state that became increasingly spherical with stronger pairing.While shape isomers were present at lower pairing strengths,robust shape coexistence was not observed.For realistic pairing interaction,the ground-state shapes transitioned from prolate in^(170)Pt to a coexistence ofγ-unstable and oblate shapes in^(172)Hg,ultimately approaching spherical symmetry in^(174)Pb.A comparison between Exact and Bardeen-Cooper-Schrieffer(BCS)pairing demonstrated that BCS pairing tends to smooth out shape coexistence and reduce the depth of the shape isomer,leading to less pronounced deformation features.The PESs for even-even^(170)-180 Pt isotopes revealed significant shape evolution.^(170)Pt showed a prolate ground state,whereas^(172)Pt exhibited both triaxial and prolate shape coexistence.In^(174)Pt,the ground state was triaxial,coexisted with a prolate minimum.For^(176)Pt,aγ-unstable ground state coexists with a prolate minimum.By 178 Pt and 180Pt,a dominant prolate minimum emerged.These results highlight the role of shape coexistence andγ-instability in the evolution of nuclear structure,especially in the mid-shell region.These findings highlight the importance of pairing interactions in nuclear deformation and shape coexistence,providing insights into the structural evolution of mid-shell nuclei.展开更多
Shape memory alloys(SMAs)and shape memory ceramics(SMCs)exhibit high recovery ability due to the martensitic transformation,which complicates the fracture mechanism of SMAs and SMCs.The phase field method,as a powerfu...Shape memory alloys(SMAs)and shape memory ceramics(SMCs)exhibit high recovery ability due to the martensitic transformation,which complicates the fracture mechanism of SMAs and SMCs.The phase field method,as a powerful numerical simulation tool,can efficiently resolve the microstructural evolution,multi-field coupling effects,and fracture behavior of SMAs and SMCs.This review begins by presenting the fundamental theoretical framework of the fracture phase field method as applied to SMAs and SMCs,covering key aspects such as the phase field modeling of martensitic transformation and brittle fracture.Subsequently,it systematically examines the phase field simulations of fracture behaviors in SMAs and SMCs,with particular emphasis on how crystallographic orientation,grain size,and grain boundary properties influence the crack propagation.Additionally,the interplay between martensite transformation and fracture mechanisms is analyzed to provide deeper insights into the material responses under mechanical loading.Finally,the review explores future prospects and emerging trends in phase field simulations of SMA and SMC fracture behavior,along with potential advancements in the fracture phase field method itself,including multi-physics coupling and enhanced computational efficiency for large-scale simulations.展开更多
The active development of space industry necessitates the cre-ation of novel materials with unique properties,including shape memory alloys(SMAs).The development of ultra-high temperature SMAs(UHTSMAs)with operating t...The active development of space industry necessitates the cre-ation of novel materials with unique properties,including shape memory alloys(SMAs).The development of ultra-high temperature SMAs(UHTSMAs)with operating temperatures above 400℃is a significant challenge[1-3].It is known that reversible thermoelas-tic martensitic transformation(MT)is the basis for shape mem-ory behavior[4].Currently,there are several systems in which MT temperatures meet the above requirements,for example,RuNb[5],HfPd[6],TiPd[7].展开更多
This article presents a detailed theoretical hybrid analysis of the magnetism and the thermal radiative heat transfer in the presence of heat generation affecting the behavior of the dispersed gold nanoparticles(AuNPs...This article presents a detailed theoretical hybrid analysis of the magnetism and the thermal radiative heat transfer in the presence of heat generation affecting the behavior of the dispersed gold nanoparticles(AuNPs)through the blood vessels of the human body.The rheology of gold-blood nanofluid is treated as magnetohydrodynamic(MHD)flow with ferromagnetic properties.The AuNPs take different shapes as bricks,cylinders,and platelets which are considered in changing the nanofluid flow behavior.Physiologically,the blood is circulated under the kinetics of the peristaltic action.The mixed properties of the slip flow,the gravity,the space porosity,the transverse ferromagnetic field,the thermal radiation,the nanoparticles shape factors,the peristaltic amplitude ratio,and the concentration of the AuNPs are interacted and analyzed for the gold-blood circulation in the inclined tube.The appropriate model for the thermal conductivity of the nanofluid is chosen to be the effective Hamilton-Crosser model.The undertaken nanofluid can be treated as incompressible non-Newtonian ferromagnetic fluid.The solutions of the partial differential governing equations of the MHD nanofluid flow are executed by the strategy of perturbation approach under the assumption of long wavelength and low Reynolds number.Graphs for the streamwise velocity distributions,temperature distributions,pressure gradients,pressure drops,and streamlines are presented under the influences of the pertinent properties.The practical implementation of this research finds application in treating cancer through a technique known as photothermal therapy(PTT).The results indicate the control role of the magnetism,the heat generation,the shape factors of the AuNPs,and its concentration on the enhancement of the thermal properties and the streamwise velocity of the nanofluid.The results reveal a marked enhancement in the temperature profiles of the nanofluid,prominently influenced by both the intensified heat source and the heightened volume fractions of the nanoparticles.Furthermore,the platelet shape is regarded as most advantageous for heat conduction owing to its highest effective thermal conductivity.AuNPs proved strong efficiency in delivering and targeting the drug to reach the affected area with tumors.These results offer valuable insights into evaluating the effectiveness of PTT in addressing diverse cancer conditions and regulating their progression.展开更多
Shaped charge has been widely used for penetrating concrete.However,due to the obvious difference between the propagation of shock waves and explosion products in water and air,the theory governing the formation of sh...Shaped charge has been widely used for penetrating concrete.However,due to the obvious difference between the propagation of shock waves and explosion products in water and air,the theory governing the formation of shaped charge jets in water as well as the underwater penetration effect of concrete need to be studied.In this paper,we introduced a modified forming theory of an underwater hemispherical shaped charge,and investigated the behavior of jet formation and concrete penetration in both air and water experimentally and numerically.The results show that the modified jet forming theory predicts the jet velocity of the hemispherical liner with an error of less than 10%.The underwater jets exhibit at least 3%faster and 11%longer than those in air.Concrete shows different failure modes after penetration in air and water.The depth of penetration deepens at least 18.75%after underwater penetration,accompanied by deeper crater with 65%smaller radius.Moreover,cracks throughout the entire target are formed,whereas cracks exist only near the penetration hole in air.This comprehensive study provides guidance for optimizing the structure of shaped charge and improves the understanding of the permeability effect of concrete in water.展开更多
The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure ...The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure variations,potentially causing catastrophic damage to the container.Current studies mainly focus on non-deforming projectiles,such as fragments,with limited exploration of shaped charge jets.In this paper,a uniquely experimental system was designed to record cavity profiles in behind-armor liquid-filled containers subjected to shaped charge jet impacts.The impact process was then numerically reproduced using the explicit simulation program ANSYS LS-DYNA with the Structured Arbitrary Lagrangian-Eulerian(S-ALE)solver.The formation mechanism,along with the dimensional and shape evolution of the cavity was investigated.Additionally,the influence of the impact kinetic energy of the jet on the cavity characteristics was analyzed.The findings reveal that the cavity profile exhibits a conical shape,primarily driven by direct jet impact and inertial effects.The expansion rates of both cavity length and maximum radius increase with jet impact kinetic energy.When the impact kinetic energy is reduced to 28.2 kJ or below,the length-to-diameter ratio of the cavity ultimately stabilizes at approximately 7.展开更多
(TiZrHf)_(50)Ni_(30)Cu_(20-x)Co_(x)(x=2,4,6,at%)high-entropy high-temperature shape memory alloys were fabricated by watercooled copper crucible in a magnetic levitation vacuum melting furnace,and the effects of Co co...(TiZrHf)_(50)Ni_(30)Cu_(20-x)Co_(x)(x=2,4,6,at%)high-entropy high-temperature shape memory alloys were fabricated by watercooled copper crucible in a magnetic levitation vacuum melting furnace,and the effects of Co content on microstructure and mechanical properties were investigated.The results indicate that the grain size of the alloy decreases with increasing the Co content.In the as-cast state,the alloy consists primarily of the B19′phase,with a trace of B2 phase.The fracture morphology is predominantly composed of the B19′phase,whereas the B2 phase is nearly absent.Increasing the Co content or reducing the sample dimensions(d)markedly enhance the compressive strength and ductility of the alloy.When d=2 mm,the(TiZrHf)_(50)Ni_(30)Cu_(14)Co_(6) alloy demonstrates the optimal mechanical properties,achieving a compressive strength of 2142.39±1.8 MPa and a plasticity of 17.31±0.3%.The compressive cyclic test shows that with increasing the compressive strain,the residual strain of the(TiZrHf)_(50)Ni_(30)Cu_(14)Co_(6) alloy increases while the recovery ability declines.The superelastic recovery capability of the alloy is continuously enhanced.The superelastic recovery rate increases from 1.36%to 2.12%,the residual strain rate rises from 1.79%to 5.52%,the elastic recovery rate ascends from 3.86%to 7.36%,while the total recovery rate declines from 74.48%to 63.20%.展开更多
Most fish exhibit remarkable morphological diversity,which is often influenced by genetic variation and ecological pressures.Consequently,these are the outcomes of organisms’responses to their environment.Meanwhile,m...Most fish exhibit remarkable morphological diversity,which is often influenced by genetic variation and ecological pressures.Consequently,these are the outcomes of organisms’responses to their environment.Meanwhile,modern morphometrics can quantify shape variation within species of the same group.This study aims to determine the body shape variation of Glossogobius giuris from Lake Mainit,Agusan Del Norte,Philippines.60 adult,uniform-sized fish samples were collected and subjected to standardized laboratory procedures.Further,the samples were digitized for 16 homologous landmark points and loaded into Symmetry Asymmetry Geometric Data(SAGE)Software.Across the tested factors—individuals,sides,and individual x sides—result shows that shape variations among individuals were highly significant(F=2.1045,p<0.0001),along with among males(F=3.2711,p<0.0001).Females exhibited higher Fluctuating Asymmetry(FA)(F=18.99,p<0.0001)compared to males(F=7.0964,p<0.0001).It suggests morphological shape differences across the sexes,and the shape variation observed could be a response to environmental perturbations.Shape variations were associated with swimming,food hunting,and predator defense.Moreover,Principal Component Analysis(PCA)demonstrates higher scores of FA in females(81.96%)than in males(74.76%).It was noticed that females had a high fluctuating asymmetry.It might be due to various physiological and ecological pressures compared to males.The observed levels of directional and fluctuating asymmetry in males and females,respectively,may indicate sex-linked morphological and developmental processes,which are important to consider in ecological or evolutionary contexts.Thus,utilizing geometric morphometrics can depict subtle differences across the same populations.展开更多
The brood-parasitic brown-headed cowbird(Molothrus ater)has one of the shortest incubation periods of any bird.Brown-headed cowbird eggs,and those of other avian brood parasites,tend to be more spherical due to their ...The brood-parasitic brown-headed cowbird(Molothrus ater)has one of the shortest incubation periods of any bird.Brown-headed cowbird eggs,and those of other avian brood parasites,tend to be more spherical due to their greater relative width.The traditional explanation for this egg shape is that it,combined with the thicker eggshells,resists host puncture-ejection.However,very few North American hosts of the brownheaded cowbird actually engage in puncture-ejection and therefore wider eggs may instead provide greater contact with a host’s brood patch during incubation,especially in large host nests.We tested whether greater egg width increased mean temperature and reduced temperature variation in brown-headed cowbirds by inserting temperature probes into brown-headed cowbird and house sparrow(Passer domesticus)eggs and placing them into red-winged blackbird(Agelaius phoeniceus)nests.House sparrow eggs are similar in appearance and in length to cowbird eggs,but are not as wide.We found no signifcant relationship between brown-headed cowbird egg width and mean incubation temperature.However,brown-headed cowbird eggs experienced less temperature variation than house sparrow eggs,and within brown-headed cowbird eggs,more spherical eggs experienced less temperature variation when accounting for differences in width.These results suggest that brownheaded cowbirds may have short incubation periods in part because their eggs exhibit less temperature variation over the course of incubation.The brown-headed cowbird’s egg shape may contribute to its accelerated embryonic development rate relative to host eggs of similar size,which explains its ability to hatch in a variety of host nests.展开更多
The emergence of additive manufacturing technology,particularly laser powder bed fusion,has revitalized NiTi alloy production.However,challenges arise regarding its mechanical properties and diminishing shape memory e...The emergence of additive manufacturing technology,particularly laser powder bed fusion,has revitalized NiTi alloy production.However,challenges arise regarding its mechanical properties and diminishing shape memory effect,which hinder its widespread application.Heat treatment has been identified as a method to enhance the performance of metallic materials in the realm of additive manufacturing.This process eliminates residual stress and enhances performance through precipitation strengthening.This study conducted a comprehensive annealing investigation on NiTi alloys to explore the impact of annealing time and temperature on the phase transformation behavior and shape memory performance.The mechanism underlying the performance enhancement was analyzed using scanning electron microscopy,energy-dispersive X-ray spectroscopy,electron backscatter diffraction,and transmission electron microscopy.The findings revealed that different annealing conditions resulted in multistep phase transformation behavior,with the 500℃-5 h sample exhibiting the best mechanical properties owing to the formation of nanoscale dispersed precipitates like Ni_(4)Ti_(3).However,higher temperatures led to larger precipitates,significantly weakening the properties of the NiTi alloy.Additionally,the annealing treatment did not have a notable impact on the grain size,texture strength,or direction.This study provides valuable insights for optimizing the heat treatment process of LPBF-NiTi alloys.展开更多
Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show ...Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.展开更多
Polymethyl methacrylate(PMMA)is an optically transparent thermoplastic with favorable processing conditions.In this study,a series of plastic scintillators are prepared via thermal polymerization,and the impact of PMM...Polymethyl methacrylate(PMMA)is an optically transparent thermoplastic with favorable processing conditions.In this study,a series of plastic scintillators are prepared via thermal polymerization,and the impact of PMMA content on their transparency and pulse shape discrimination(PSD)ability is investigated.The fabricated samples,comprising a polystyrene(PS)-PMMA matrix,30.0 wt%2,5-diphenyloxazole(PPO),and 0.2 wt%9,10-diphenylanthracene(DPA),exhibit high transparency with transmissivity ranging from 70.0 to 90.0%(above 415.0 nm)and demonstrate excellent n/γdiscrimination capability.Transparency increased with increasing PMMA content across the entire visible light spectrum.However,the PSD performance gradually deteriorated when the aromatic matrix was replaced with PMMA.The scintillator containing 20.0 wt%PMMA demonstrated the best stability concerning PSD properties and relative light yields.展开更多
Avian wings are central to their remarkable flight ability and diverse life history strategies,including behaviors such as fighting and mating.These multifaceted functions are intricately tied to wing shape,which vari...Avian wings are central to their remarkable flight ability and diverse life history strategies,including behaviors such as fighting and mating.These multifaceted functions are intricately tied to wing shape,which varies significantly across species because of the complex interplay of evolutionary and ecological pressures.Many indices have been developed to quantify wing characteristics to facilitate the study and comparison of avian wing morphology across species.This study provides a comprehensive overview of existing quantitative methods for analyzing avian wing shapes.We then constructed a new quantification framework through the beta distribution,which can generate indices reflecting the shape of avian wings(center,dispersion,skewness,and kurtosis).Next,we used the flight feathers of 613 bird species to perform different quantitative analyses and explore the relationships between various wing shape quantification methods and life history traits,which serve as proxies for the selective forces shaping wing morphology.We find that the wing shape indices are more strongly associated with ecological variables than with morphological variables,especially for migration,habitat and territoriality.This research guides the selection of appropriate methods for wing shape analysis,contributing to a deeper understanding of avian morphology and its evolutionary drivers.展开更多
In this study,the potential application of shaped charge jets as transient antennas for electromagnetic signal transmission was explored and an electromagnetic pulse radiation system with a shaped charge jet as a tran...In this study,the potential application of shaped charge jets as transient antennas for electromagnetic signal transmission was explored and an electromagnetic pulse radiation system with a shaped charge jet as a transient antenna was proposed.During the research,crucial characteristics of the transient antenna formed by a shaped charge with a 30 mm diameter,such as resonant frequency,radiation pattern,and radiation efficiency,were evaluated.The typical shaped charge jet morphology was obtained based on the simulations,in which it could insight the dynamic behavior of the shaped charge jet selected.An equivalent model experiment was employed to test the radiation efficiency,and it showed that a shorting pin loading method could increase the relative bandwidth of the jet antenna to 32.8%,and the experimental results correlate with the theoretical predictions for half-wave dipole antennas reasonably well.Additionally,variations in the diameter of the shaped charge jet were found to affect the input impedance and impedance bandwidth,while the length of the jet influenced the resonant frequency of the antenna.This suggests that altering these parameters can achieve reconfigurability of the jet antenna.展开更多
This paper introduces an innovative approach to the deployment of folding wings on cruise missiles,aiming to overcome the issues associated with explosive devices.The proposed solution involves employing NiTi shape me...This paper introduces an innovative approach to the deployment of folding wings on cruise missiles,aiming to overcome the issues associated with explosive devices.The proposed solution involves employing NiTi shape memory wires for a nonexplosive self-deploying wing mechanism.The fundamental concept of the design revolves around the utilization of NiTi wires,which contract upon electric heating.This contraction action severs the shear pin,consequently releasing the folded wings.The operational performance of the NiTi wire is thoroughly examined through a series of electro-thermo-mechanical tests,offering valuable insights for selecting the appropriate wire material.Moreover,the mechanical dynamics involved in the self-deploying process are elucidated through finite element simulations.The simulations highlight that the thermally-induced phase transformation within the NiTi wires generates substantial actuation forces,exceeding 700 N,and strokes of over 6 mm.These forces are deemed sufficient for breaking the aluminum shear pin and effecting wing deployment.The proposed mechanism’s practical viability is substantiated through prototype tests,which conclusively establish the superiority of the nonexplosive self-deploying wing mechanism when compared to conventional methods.The experimental outcomes underscore the mechanism’s capability to markedly reduce overload stress while remaining compliant with the designated requirements and constraints.展开更多
文摘A Shape Memory Polymer Composite(SMPC)is developed by reinforcing an epoxy-based polymer with randomly oriented short glass fibers.Diverging from previous research,which primarily focused on the hot programming of short glass fiber-based SMPCs,this work explores the potential for programming below the glass transition temperature(Tg)for epoxy-based SMPCs.To mitigate the inherent brittleness of the SMPC during deformation,a linear polymer is incorporated,and a temperature between room temperature and Tg is chosen as the deformation temperature to study the shape memory properties.The findings demonstrate an enhancement in shape fixity and recovery stress,alongside a reduction in shape recovery,with the incorporation of short glass fibers.In addition to tensile properties,thermal properties such as thermal conductivity,specific heat capacity,and glass transition temperature are investigated for their dependence on fiber content.Microscopic properties,such as fiber-matrix adhesion and the dispersion of glass fibers,are examined through Scanning Electron Microscope imaging.The fiber length distribution and mean fiber lengths are also measured for different fiber fractions.
基金supported by the National Key R&D Program of China(2022YFB3805700)the National Natural Science Foundation of China(Grant No.12302198)+2 种基金China Postdoctoral Science Foundation(2022M720042)Heilongjiang Postdoctoral Science Foundation(LBH-Z22016)Key Project of Heilongjiang Provincial Department of Science and Technology(2022ZX02C25).
文摘Metamaterials,owing to their exceptional physical characteristics that are absent in natural materials,have emerged as a crucial constituent of intelligent devices and systems.However,there are still significant challenges that necessitate immediate attention,as they have considerably constrained the applicability of metamaterials,including fixed mechanical properties post-fabrication and restricted design freedom.Here,thermo-responsive,photo-responsive,electro-responsive,and magneto-responsive shape memory polymer nano-composites were developed,and shape memory gradient metamaterials were fabricated using multi-material 4D printing technology.The correlation mechanism between the design parameters and the mechanical properties of multi-responsive gradient metamaterials was systematically analyzed,and the highly designable and programmable configuration and mechanical properties of the gradient metamaterials were realized.More importantly,4D printed multi-responsive shape memory polymer gradient metamaterials can be programmed in situ without additional infrastructure for multi-functional mechanical functions,paving the way for the realization of multiple functions of a single structure.Based on the multi-responsive gradient metamaterials,4D printed digital pixel metamaterial intelligent information carriers were fabricated,featuring customizable encryption and decryption protocols,exceptional scalability,and reusability.Additionally,4D printed gradient metamaterial logic gate electronic devices were developed,which were anticipated to contribute to the development of smart,adaptable robotic systems that combine sensing,actuation,and decision-making capabilities.
基金supported by the National Natural Science Foundation of China(Nos.12275115 and 12175097)the National Science Centre of Poland(No.2023/49/B/ST2/01294).
文摘This study explores the phenomenon of shape coexistence in nuclei around^(172)Hg,with a focus on the isotopes^(170)Pt,^(172)Hg,and^(174)Pb,as well as the^(170)Pt to^(180)Pt isotopic chain.Utilizing a macro-microscopic approach that incorporates the Lublin-Strasbourg Drop model combined with a Yukawa-Folded potential and pairing corrections,we analyze the potential energy surfaces(PESs)to understand the impact of pairing interaction.For^(170)Pt,the PES exhibited a prolate ground state,with additional triaxial and oblate-shaped isomers.In^(172)Hg,the ground-state deformation transitions from triaxial to oblate with increasing pairing interaction,demonstrating its nearlyγ-unstable nature.Three shape isomers(prolate,triaxial,and oblate)were observed,with increased pairing strength leading to the disappearance of the triaxial isomer.^(174)Pb exhibited a prolate ground state that became increasingly spherical with stronger pairing.While shape isomers were present at lower pairing strengths,robust shape coexistence was not observed.For realistic pairing interaction,the ground-state shapes transitioned from prolate in^(170)Pt to a coexistence ofγ-unstable and oblate shapes in^(172)Hg,ultimately approaching spherical symmetry in^(174)Pb.A comparison between Exact and Bardeen-Cooper-Schrieffer(BCS)pairing demonstrated that BCS pairing tends to smooth out shape coexistence and reduce the depth of the shape isomer,leading to less pronounced deformation features.The PESs for even-even^(170)-180 Pt isotopes revealed significant shape evolution.^(170)Pt showed a prolate ground state,whereas^(172)Pt exhibited both triaxial and prolate shape coexistence.In^(174)Pt,the ground state was triaxial,coexisted with a prolate minimum.For^(176)Pt,aγ-unstable ground state coexists with a prolate minimum.By 178 Pt and 180Pt,a dominant prolate minimum emerged.These results highlight the role of shape coexistence andγ-instability in the evolution of nuclear structure,especially in the mid-shell region.These findings highlight the importance of pairing interactions in nuclear deformation and shape coexistence,providing insights into the structural evolution of mid-shell nuclei.
基金supported by the National Natural Science Foundation of China(12202294)the Sichuan Science and Technology Program(2024NSFSC1346).
文摘Shape memory alloys(SMAs)and shape memory ceramics(SMCs)exhibit high recovery ability due to the martensitic transformation,which complicates the fracture mechanism of SMAs and SMCs.The phase field method,as a powerful numerical simulation tool,can efficiently resolve the microstructural evolution,multi-field coupling effects,and fracture behavior of SMAs and SMCs.This review begins by presenting the fundamental theoretical framework of the fracture phase field method as applied to SMAs and SMCs,covering key aspects such as the phase field modeling of martensitic transformation and brittle fracture.Subsequently,it systematically examines the phase field simulations of fracture behaviors in SMAs and SMCs,with particular emphasis on how crystallographic orientation,grain size,and grain boundary properties influence the crack propagation.Additionally,the interplay between martensite transformation and fracture mechanisms is analyzed to provide deeper insights into the material responses under mechanical loading.Finally,the review explores future prospects and emerging trends in phase field simulations of SMA and SMC fracture behavior,along with potential advancements in the fracture phase field method itself,including multi-physics coupling and enhanced computational efficiency for large-scale simulations.
基金supported by the National Natural Science Foundation of China(Nos.52201207 and 52271169)the Fundamental Research Funds for the Central University(No.3072024LJ1002).
文摘The active development of space industry necessitates the cre-ation of novel materials with unique properties,including shape memory alloys(SMAs).The development of ultra-high temperature SMAs(UHTSMAs)with operating temperatures above 400℃is a significant challenge[1-3].It is known that reversible thermoelas-tic martensitic transformation(MT)is the basis for shape mem-ory behavior[4].Currently,there are several systems in which MT temperatures meet the above requirements,for example,RuNb[5],HfPd[6],TiPd[7].
文摘This article presents a detailed theoretical hybrid analysis of the magnetism and the thermal radiative heat transfer in the presence of heat generation affecting the behavior of the dispersed gold nanoparticles(AuNPs)through the blood vessels of the human body.The rheology of gold-blood nanofluid is treated as magnetohydrodynamic(MHD)flow with ferromagnetic properties.The AuNPs take different shapes as bricks,cylinders,and platelets which are considered in changing the nanofluid flow behavior.Physiologically,the blood is circulated under the kinetics of the peristaltic action.The mixed properties of the slip flow,the gravity,the space porosity,the transverse ferromagnetic field,the thermal radiation,the nanoparticles shape factors,the peristaltic amplitude ratio,and the concentration of the AuNPs are interacted and analyzed for the gold-blood circulation in the inclined tube.The appropriate model for the thermal conductivity of the nanofluid is chosen to be the effective Hamilton-Crosser model.The undertaken nanofluid can be treated as incompressible non-Newtonian ferromagnetic fluid.The solutions of the partial differential governing equations of the MHD nanofluid flow are executed by the strategy of perturbation approach under the assumption of long wavelength and low Reynolds number.Graphs for the streamwise velocity distributions,temperature distributions,pressure gradients,pressure drops,and streamlines are presented under the influences of the pertinent properties.The practical implementation of this research finds application in treating cancer through a technique known as photothermal therapy(PTT).The results indicate the control role of the magnetism,the heat generation,the shape factors of the AuNPs,and its concentration on the enhancement of the thermal properties and the streamwise velocity of the nanofluid.The results reveal a marked enhancement in the temperature profiles of the nanofluid,prominently influenced by both the intensified heat source and the heightened volume fractions of the nanoparticles.Furthermore,the platelet shape is regarded as most advantageous for heat conduction owing to its highest effective thermal conductivity.AuNPs proved strong efficiency in delivering and targeting the drug to reach the affected area with tumors.These results offer valuable insights into evaluating the effectiveness of PTT in addressing diverse cancer conditions and regulating their progression.
基金supported by the National Science Foundation of China(Grant Nos.12372361,12102427,12372335 and 12102202)the Fundamental Research Funds for the Central Universities(Grant No.30923010908)Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX23_0520).
文摘Shaped charge has been widely used for penetrating concrete.However,due to the obvious difference between the propagation of shock waves and explosion products in water and air,the theory governing the formation of shaped charge jets in water as well as the underwater penetration effect of concrete need to be studied.In this paper,we introduced a modified forming theory of an underwater hemispherical shaped charge,and investigated the behavior of jet formation and concrete penetration in both air and water experimentally and numerically.The results show that the modified jet forming theory predicts the jet velocity of the hemispherical liner with an error of less than 10%.The underwater jets exhibit at least 3%faster and 11%longer than those in air.Concrete shows different failure modes after penetration in air and water.The depth of penetration deepens at least 18.75%after underwater penetration,accompanied by deeper crater with 65%smaller radius.Moreover,cracks throughout the entire target are formed,whereas cracks exist only near the penetration hole in air.This comprehensive study provides guidance for optimizing the structure of shaped charge and improves the understanding of the permeability effect of concrete in water.
基金financial support from the National Natural Science Foundation of China(Grant No.11572159).
文摘The cavity characteristics in liquid-filled containers caused by high-velocity impacts represent an important area of research in hydrodynamic ram phenomena.The dynamic expansion of the cavity induces liquid pressure variations,potentially causing catastrophic damage to the container.Current studies mainly focus on non-deforming projectiles,such as fragments,with limited exploration of shaped charge jets.In this paper,a uniquely experimental system was designed to record cavity profiles in behind-armor liquid-filled containers subjected to shaped charge jet impacts.The impact process was then numerically reproduced using the explicit simulation program ANSYS LS-DYNA with the Structured Arbitrary Lagrangian-Eulerian(S-ALE)solver.The formation mechanism,along with the dimensional and shape evolution of the cavity was investigated.Additionally,the influence of the impact kinetic energy of the jet on the cavity characteristics was analyzed.The findings reveal that the cavity profile exhibits a conical shape,primarily driven by direct jet impact and inertial effects.The expansion rates of both cavity length and maximum radius increase with jet impact kinetic energy.When the impact kinetic energy is reduced to 28.2 kJ or below,the length-to-diameter ratio of the cavity ultimately stabilizes at approximately 7.
基金National Natural Science Foundation of China(12404230,52061027)Science and Technology Program Project of Gansu Province(22YF7GA155)+1 种基金Lanzhou Youth Science and Technology Talent Innovation Project(2023-QN-91)Zhejiang Provincial Natural Science Foundation of China(LY23E010002)。
文摘(TiZrHf)_(50)Ni_(30)Cu_(20-x)Co_(x)(x=2,4,6,at%)high-entropy high-temperature shape memory alloys were fabricated by watercooled copper crucible in a magnetic levitation vacuum melting furnace,and the effects of Co content on microstructure and mechanical properties were investigated.The results indicate that the grain size of the alloy decreases with increasing the Co content.In the as-cast state,the alloy consists primarily of the B19′phase,with a trace of B2 phase.The fracture morphology is predominantly composed of the B19′phase,whereas the B2 phase is nearly absent.Increasing the Co content or reducing the sample dimensions(d)markedly enhance the compressive strength and ductility of the alloy.When d=2 mm,the(TiZrHf)_(50)Ni_(30)Cu_(14)Co_(6) alloy demonstrates the optimal mechanical properties,achieving a compressive strength of 2142.39±1.8 MPa and a plasticity of 17.31±0.3%.The compressive cyclic test shows that with increasing the compressive strain,the residual strain of the(TiZrHf)_(50)Ni_(30)Cu_(14)Co_(6) alloy increases while the recovery ability declines.The superelastic recovery capability of the alloy is continuously enhanced.The superelastic recovery rate increases from 1.36%to 2.12%,the residual strain rate rises from 1.79%to 5.52%,the elastic recovery rate ascends from 3.86%to 7.36%,while the total recovery rate declines from 74.48%to 63.20%.
文摘Most fish exhibit remarkable morphological diversity,which is often influenced by genetic variation and ecological pressures.Consequently,these are the outcomes of organisms’responses to their environment.Meanwhile,modern morphometrics can quantify shape variation within species of the same group.This study aims to determine the body shape variation of Glossogobius giuris from Lake Mainit,Agusan Del Norte,Philippines.60 adult,uniform-sized fish samples were collected and subjected to standardized laboratory procedures.Further,the samples were digitized for 16 homologous landmark points and loaded into Symmetry Asymmetry Geometric Data(SAGE)Software.Across the tested factors—individuals,sides,and individual x sides—result shows that shape variations among individuals were highly significant(F=2.1045,p<0.0001),along with among males(F=3.2711,p<0.0001).Females exhibited higher Fluctuating Asymmetry(FA)(F=18.99,p<0.0001)compared to males(F=7.0964,p<0.0001).It suggests morphological shape differences across the sexes,and the shape variation observed could be a response to environmental perturbations.Shape variations were associated with swimming,food hunting,and predator defense.Moreover,Principal Component Analysis(PCA)demonstrates higher scores of FA in females(81.96%)than in males(74.76%).It was noticed that females had a high fluctuating asymmetry.It might be due to various physiological and ecological pressures compared to males.The observed levels of directional and fluctuating asymmetry in males and females,respectively,may indicate sex-linked morphological and developmental processes,which are important to consider in ecological or evolutionary contexts.Thus,utilizing geometric morphometrics can depict subtle differences across the same populations.
文摘The brood-parasitic brown-headed cowbird(Molothrus ater)has one of the shortest incubation periods of any bird.Brown-headed cowbird eggs,and those of other avian brood parasites,tend to be more spherical due to their greater relative width.The traditional explanation for this egg shape is that it,combined with the thicker eggshells,resists host puncture-ejection.However,very few North American hosts of the brownheaded cowbird actually engage in puncture-ejection and therefore wider eggs may instead provide greater contact with a host’s brood patch during incubation,especially in large host nests.We tested whether greater egg width increased mean temperature and reduced temperature variation in brown-headed cowbirds by inserting temperature probes into brown-headed cowbird and house sparrow(Passer domesticus)eggs and placing them into red-winged blackbird(Agelaius phoeniceus)nests.House sparrow eggs are similar in appearance and in length to cowbird eggs,but are not as wide.We found no signifcant relationship between brown-headed cowbird egg width and mean incubation temperature.However,brown-headed cowbird eggs experienced less temperature variation than house sparrow eggs,and within brown-headed cowbird eggs,more spherical eggs experienced less temperature variation when accounting for differences in width.These results suggest that brownheaded cowbirds may have short incubation periods in part because their eggs exhibit less temperature variation over the course of incubation.The brown-headed cowbird’s egg shape may contribute to its accelerated embryonic development rate relative to host eggs of similar size,which explains its ability to hatch in a variety of host nests.
基金supported by National Key R&D Program of China(Grant No.2022YFB4601701)74th Batch of General Funding from the China Postdoctoral Science Foundation(Grant No.2023M741341)+7 种基金5th Batch of Special Grants from the China Postdoctoral Science Foundation(before the station,Grant No.2023TQ0129)Postdoctoral Fellowship Program of CPSF(Grant No.GZB20230257)National Natural Science Foundation of China(Grant Nos.52375289,52205310)Natural Science Foundation of Shandong Province(Grant No.ZR2021QE263)Science and Technology Development Program of Jilin Province(Grant No.20230508045RC)Capital Construction Fund plan within the budget of Jilin Province(Grant No.2023C041-4)Chongqing Natural Science Foundation(Grant No.CSTB2022NSCQ-MSX0225)the Shandong Postdoctoral Science Foundation(Grant No.SDCX-ZG-202400238).
文摘The emergence of additive manufacturing technology,particularly laser powder bed fusion,has revitalized NiTi alloy production.However,challenges arise regarding its mechanical properties and diminishing shape memory effect,which hinder its widespread application.Heat treatment has been identified as a method to enhance the performance of metallic materials in the realm of additive manufacturing.This process eliminates residual stress and enhances performance through precipitation strengthening.This study conducted a comprehensive annealing investigation on NiTi alloys to explore the impact of annealing time and temperature on the phase transformation behavior and shape memory performance.The mechanism underlying the performance enhancement was analyzed using scanning electron microscopy,energy-dispersive X-ray spectroscopy,electron backscatter diffraction,and transmission electron microscopy.The findings revealed that different annealing conditions resulted in multistep phase transformation behavior,with the 500℃-5 h sample exhibiting the best mechanical properties owing to the formation of nanoscale dispersed precipitates like Ni_(4)Ti_(3).However,higher temperatures led to larger precipitates,significantly weakening the properties of the NiTi alloy.Additionally,the annealing treatment did not have a notable impact on the grain size,texture strength,or direction.This study provides valuable insights for optimizing the heat treatment process of LPBF-NiTi alloys.
基金funded by the National Natural Science Founda-tion of China(52071109).
文摘Unlike conventional spherical charges,a shaped charge generates not only a strong shock wave and a pulsating bubble,but also a high strain rate metal jet and a ballistic wave during the underwater explosion.They show significant characteristic differences and couple each other.This paper designs and conducts experiments with shaped charges to analyze the complicated process.The effects of liner angle and weight of shaped charge on the characteristics of metal jets,waves,and bubbles are discussed.It is found that in underwater explosions,the shaped charge generates the metal jet accompanied by the ballistic wave.Then,the shock wave propagates and superimposes with the ballistic wave,and the generated bubble pulsates periodically.It is revealed that the maximum head velocity of the metal jet versus the liner angle a and length-to-diameter ratio k of the shaped charge follows the laws of 1/(α/180°)^(0.55)andλ^(0.16),respectively.The head shape and velocity of the metal jet determine the curvature and propagation speed of the initial ballistic wave,thus impacting the superposition time and region with the shock wave.Our findings also reveal that the metal jet carries away some explosion products,which hinders the bubble development,causing an inward depression of the bubble wall near the metal jet.Therefore,the maximum bubble radius and pulsation period are 5.2%and 3.9%smaller than the spherical charge with the same weight.In addition,the uneven axial energy distribution of the shaped charge leads to an oblique bubble jet formation.
基金supported by the National Natural Science Foundation of China(No.12027813)the fund of National Innovation Center of Radiation Application of China(Nos.KFZC2020020501,KFZC2021010101).
文摘Polymethyl methacrylate(PMMA)is an optically transparent thermoplastic with favorable processing conditions.In this study,a series of plastic scintillators are prepared via thermal polymerization,and the impact of PMMA content on their transparency and pulse shape discrimination(PSD)ability is investigated.The fabricated samples,comprising a polystyrene(PS)-PMMA matrix,30.0 wt%2,5-diphenyloxazole(PPO),and 0.2 wt%9,10-diphenylanthracene(DPA),exhibit high transparency with transmissivity ranging from 70.0 to 90.0%(above 415.0 nm)and demonstrate excellent n/γdiscrimination capability.Transparency increased with increasing PMMA content across the entire visible light spectrum.However,the PSD performance gradually deteriorated when the aromatic matrix was replaced with PMMA.The scintillator containing 20.0 wt%PMMA demonstrated the best stability concerning PSD properties and relative light yields.
基金supported by the National Natural Science Foundation of China(No.32170491)the Scientific Research Team Project of the College of Life Sciences,Beijing Normal University in 2024。
文摘Avian wings are central to their remarkable flight ability and diverse life history strategies,including behaviors such as fighting and mating.These multifaceted functions are intricately tied to wing shape,which varies significantly across species because of the complex interplay of evolutionary and ecological pressures.Many indices have been developed to quantify wing characteristics to facilitate the study and comparison of avian wing morphology across species.This study provides a comprehensive overview of existing quantitative methods for analyzing avian wing shapes.We then constructed a new quantification framework through the beta distribution,which can generate indices reflecting the shape of avian wings(center,dispersion,skewness,and kurtosis).Next,we used the flight feathers of 613 bird species to perform different quantitative analyses and explore the relationships between various wing shape quantification methods and life history traits,which serve as proxies for the selective forces shaping wing morphology.We find that the wing shape indices are more strongly associated with ecological variables than with morphological variables,especially for migration,habitat and territoriality.This research guides the selection of appropriate methods for wing shape analysis,contributing to a deeper understanding of avian morphology and its evolutionary drivers.
基金supported by the"Fundamental Research Funds for the Central Universities"(Grant No.30924010801).
文摘In this study,the potential application of shaped charge jets as transient antennas for electromagnetic signal transmission was explored and an electromagnetic pulse radiation system with a shaped charge jet as a transient antenna was proposed.During the research,crucial characteristics of the transient antenna formed by a shaped charge with a 30 mm diameter,such as resonant frequency,radiation pattern,and radiation efficiency,were evaluated.The typical shaped charge jet morphology was obtained based on the simulations,in which it could insight the dynamic behavior of the shaped charge jet selected.An equivalent model experiment was employed to test the radiation efficiency,and it showed that a shorting pin loading method could increase the relative bandwidth of the jet antenna to 32.8%,and the experimental results correlate with the theoretical predictions for half-wave dipole antennas reasonably well.Additionally,variations in the diameter of the shaped charge jet were found to affect the input impedance and impedance bandwidth,while the length of the jet influenced the resonant frequency of the antenna.This suggests that altering these parameters can achieve reconfigurability of the jet antenna.
基金Supported by National Natural Science Foundation of China(Grant No.12372156).
文摘This paper introduces an innovative approach to the deployment of folding wings on cruise missiles,aiming to overcome the issues associated with explosive devices.The proposed solution involves employing NiTi shape memory wires for a nonexplosive self-deploying wing mechanism.The fundamental concept of the design revolves around the utilization of NiTi wires,which contract upon electric heating.This contraction action severs the shear pin,consequently releasing the folded wings.The operational performance of the NiTi wire is thoroughly examined through a series of electro-thermo-mechanical tests,offering valuable insights for selecting the appropriate wire material.Moreover,the mechanical dynamics involved in the self-deploying process are elucidated through finite element simulations.The simulations highlight that the thermally-induced phase transformation within the NiTi wires generates substantial actuation forces,exceeding 700 N,and strokes of over 6 mm.These forces are deemed sufficient for breaking the aluminum shear pin and effecting wing deployment.The proposed mechanism’s practical viability is substantiated through prototype tests,which conclusively establish the superiority of the nonexplosive self-deploying wing mechanism when compared to conventional methods.The experimental outcomes underscore the mechanism’s capability to markedly reduce overload stress while remaining compliant with the designated requirements and constraints.
