The problem of minimizing the maximum lateness on a single machine with family setups is considered.To solve the problem, dominance property is studied and then introduced into the tabu search（TS） algorithm.With the...The problem of minimizing the maximum lateness on a single machine with family setups is considered.To solve the problem, dominance property is studied and then introduced into the tabu search（TS） algorithm.With the dominance property, most unpromising neighbors can be excluded from the neighborhood, which makes the search process always focus on the most promising areas of the solution space.The proposed algorithms are tested both on the randomly generated problems and on the real-life problems.Computational results show that the proposed TS algorithm outperforms the best existing algorithm and can solve the real-life problems in about 1.3 on average.展开更多
Previous research has clearly and consistently shown that flow time advantages accrue from splitting production lots into smaller transfer batches or sub-lots. Less extensively discussed, and certainly undesired, is t...Previous research has clearly and consistently shown that flow time advantages accrue from splitting production lots into smaller transfer batches or sub-lots. Less extensively discussed, and certainly undesired, is the fact that lot splitting may dramatically increase the number of setups required, making it impractical in some settings. This paper describes and demonstrates a primary cause of these “extra” setups. It then proposes and evaluates decision rules which selectively invoke lot splitting in an attempt to avoid extra setups. For the closed job shop environment tested, our results indicate that conditional logic can achieve a substantial portion of lot splitting’s flow time improvement while avoiding the vast majority of the additional setups which would be caused by previously tested lot splitting schemes.展开更多
This paper provides a comprehensive review of various experimental methods used to study carbon corrosion in automotive polymer exchange membrane fuel cells.Quantifying the extent of carbon corrosion is essential for ...This paper provides a comprehensive review of various experimental methods used to study carbon corrosion in automotive polymer exchange membrane fuel cells.Quantifying the extent of carbon corrosion is essential for advancing the technology and implementing effective mitigation strategies.While studying degradation events directly within a real-world fuel cell vehicle offers the most reliable insights,the high costs and time demands make it necessary to develop specialised experimental techniques that provide high-resolution data more efficiently and cost-effectively.This review explores the various experimental approaches utilised in automotive application induced carbon corrosion studies globally,including load profiles,test setups,break-in procedures,and cell recovery protocols.In this paper,emphasis is placed on the standardised procedures proposed by leading institutions worldwide,accompanied by critical discussions on these protocols.Furthermore,the paper highlights modified or innovative procedures developed by smaller institutions,universities,and individual researchers,thereby offering a comprehensive overview essential for carbon corrosion analysis.The review also discusses the fundamental principles,benefits,and limitations of various procedures,offering guidance on selecting the most appropriate approach for a given study.Lastly,it addresses the limitations within the current body of literature and outlines potential future prospects.展开更多
A simple procedure to plan, verify and implement craniospinal irradiation（CSI） with patients supine is presented. Treatment is conducted with a single posterior spinal field abutting two lateral cranial fields. The ...A simple procedure to plan, verify and implement craniospinal irradiation（CSI） with patients supine is presented. Treatment is conducted with a single posterior spinal field abutting two lateral cranial fields. The opposed lateral fields are half-blocked and the inferior line is perpendicular. The posterior field uses some fixed field parameters so that the cephalad edge of the posterior field is coplanar with the caudal edges of the lateral fields and it is independent of the height of the couch. A steel-shot ball is used to measure the size of overlap or gap at the junction using portal images of an electron portal image device or portal films. The results of analyzing the portal images show that the errors of the junction are within ± 1 mm. The dose-volume histograms （DVHs）show that there are not unbearable hot or cold spots in the clinic target volumes （CTVs）. Supine craniospinal treatment is a reliable and convenient alternative to treatment in the prone position and avoids the technical difficulties of the latter. The use of fixed field geometry greatly facilitates treatment planning and effectively reduces the amount of time of setup, verification and treatment.展开更多
Back-streaming neutrons from the spallation target of the China Spallation Neutron Source(CSNS)that emit through the incoming proton channel were exploited to build a white neutron beam facility(the so-called Back-n w...Back-streaming neutrons from the spallation target of the China Spallation Neutron Source(CSNS)that emit through the incoming proton channel were exploited to build a white neutron beam facility(the so-called Back-n white neutron source),which was completed in March 2018.The Back-n neutron beam is very intense,at approximately 29107 n/cm2/s at 55 m from the target,and has a nominal proton beam with a power of 100 kW in the CSNS-I phase and a kinetic energy of 1.6 GeV and a thick tungsten target in multiple slices with modest moderation from the cooling water through the slices.In addition,the excellent energy spectrum spanning from 0.5 eV to 200 MeV,and a good time resolution related tothe time-of-flight measurements make it a typical white neutron source for nuclear data measurements;its overall performance is among that of the best white neutron sources in the world.Equipped with advanced spectrometers,detectors,and application utilities,the Back-n facility can serve wide applications,with a focus on neutron-induced cross-sectional measurements.This article presents an overview of the neutron beam characteristics,the experimental setups,and the ongoing applications at Backn.展开更多
With the tides propagating from the open sea to the lagoon, the mean water level （MWL） in the inlet and lagoon becomes different from that at the open sea, and a setup/setdown is generated. The change of MWL （setup...With the tides propagating from the open sea to the lagoon, the mean water level （MWL） in the inlet and lagoon becomes different from that at the open sea, and a setup/setdown is generated. The change of MWL （setup/setdown） in the system imposes a great impact on regulating the development of tidal marshes, on determining the long-term water level for harbor maintenance, on the planning for the water front development with the flood control for the possible inundation, and on the interpretation of the historical sea level change when using tidal marsh peat deposits in the lagoon as the indicator for open sea＇ s sea level. In this case study on the mechanisms which control the setup/setdown in Xincun Inlet, Hainan in China, the 2-D barotropic mode of Eulerian - Lagrangian CIRCulation （ELCIRC） model was utilized. After model calibration and verification, a series of numerical experiments were conducted to examine the effects of bottom friction and advection terms, wetting and drying of intertidal areas, bathymetry and boundary conditions on the setup/setdown in the system. The modeling results show that setup occurs over the inlet and lagoon areas with an order of one tenth of the tide range at the entrance. The larger the bottom friction is, a larger setup is generated. Without the advection term, the setup is reduced clue to a decrease of water level gradient to compensate for the disappearance of the advection term. Even without overtides, a setup can still be developed in the system. Sea level rise and dredging in the inlet and tidal channel can cause a decrease of setup in the system, whereas shoaling of the system can increase the setup. The uniqueness of the Xincun Inlet with respect to MWL change is that there is no evident setdown in the inlet, which can be attributed to the complex geometry and bathymetry associated with the inlet system.展开更多
Complex factors including steep slopes, intense wave breaking, large bottom friction and remarkable wave setup should be considered while studying wave propagation over coral reefs, and how to simulate wave propagatio...Complex factors including steep slopes, intense wave breaking, large bottom friction and remarkable wave setup should be considered while studying wave propagation over coral reefs, and how to simulate wave propagation and setup on coral reefs efficiently has become a primary focus. Several wave models can be used on coral reefs as have been published, but further testing and comparison of the reliability and applicability of these models are needed. A comparative study of four numerical wave models (i.e., FUNWAVE-TVD, Coulwave, NHWAVE and ZZL18) is carried out in this paper. These models’ governing equations and numerical methods are compared and analyzed firstly to obtain their differences and connections;then the simulation effects of the four wave models are tested in four representative laboratory experiments. The results show that all four models can reasonably predict the spectrum transformation. Coulwave, NHWAVE and ZZL18 can predict the wave height variation more accurately;Coulwave and FUNWAVE-TVD tend to underestimate wave setup on the reef top induced by spilling breaker, while NHWAVE and ZZL18 can predict wave setup relatively accurately for all types of breakers;NHWAVE and ZZL18 can predict wave reflection by steep reef slope more accurately. This study can provide evidence for choosing suitable models for practical engineering or establishing new models.展开更多
Objective: To examine the trajectory of psychosomatic symptoms and to explore the impact of psychosomatic symptoms on setup error in patients undergoing breast cancer radiotherapy.Methods: A total of 102 patients with...Objective: To examine the trajectory of psychosomatic symptoms and to explore the impact of psychosomatic symptoms on setup error in patients undergoing breast cancer radiotherapy.Methods: A total of 102 patients with early breast cancer who received initial radiotherapy were consecutively recruited. The M.D. Anderson Symptom Inventory(MDASI) and three different anxiety scales, i.e., the Self-Rating Anxiety Scale(SAS), State-Trait Anxiety Inventory(STAI), and Anxiety Sensitivity Index(ASI), were used in this study. The radiotherapy setup errors were measured in millimetres by comparing the real-time isocratic verification film during radiotherapy with the digitally reconstructed radiograph(DRR). Patients completed the assessment at three time points: before the initial radiotherapy(T1), before the middle radiotherapy(T2), and before the last radiotherapy(T3).Results: The SAS and STAI-State scores of breast cancer patients at T1 were significantly higher than those at T2 and T3(F=24.44, P<0.001;F=30.25, P<0.001). The core symptoms of MDASI were positively correlated with anxiety severity. The setup errors of patients with high SAS scores were greater than those of patients with low anxiety levels at T1(Z=-2.01, P=0.044). We also found that higher SAS scores were associated with a higher risk of radiotherapy setup errors at T1(B=0.458, P<0.05).Conclusions: This study seeks to identify treatment-related psychosomatic symptoms and mitigate their impact on patients and treatment. Patients with early breast cancer experienced the highest level of anxiety before the initial radiotherapy, and then, anxiety levels declined. Patients with high somatic symptoms of anxiety may have a higher risk of radiotherapy setup errors.展开更多
基金supported by the Major State Basic Research Development Program of China (973 Program)(2002CB312205)the National Natural Science Foundation of China (60574077+2 种基金 60874071 60834004)the National High Technology Research and Development Program of China (863 Program) (2007AA04Z102)
文摘The problem of minimizing the maximum lateness on a single machine with family setups is considered.To solve the problem, dominance property is studied and then introduced into the tabu search（TS） algorithm.With the dominance property, most unpromising neighbors can be excluded from the neighborhood, which makes the search process always focus on the most promising areas of the solution space.The proposed algorithms are tested both on the randomly generated problems and on the real-life problems.Computational results show that the proposed TS algorithm outperforms the best existing algorithm and can solve the real-life problems in about 1.3 on average.
文摘Previous research has clearly and consistently shown that flow time advantages accrue from splitting production lots into smaller transfer batches or sub-lots. Less extensively discussed, and certainly undesired, is the fact that lot splitting may dramatically increase the number of setups required, making it impractical in some settings. This paper describes and demonstrates a primary cause of these “extra” setups. It then proposes and evaluates decision rules which selectively invoke lot splitting in an attempt to avoid extra setups. For the closed job shop environment tested, our results indicate that conditional logic can achieve a substantial portion of lot splitting’s flow time improvement while avoiding the vast majority of the additional setups which would be caused by previously tested lot splitting schemes.
文摘This paper provides a comprehensive review of various experimental methods used to study carbon corrosion in automotive polymer exchange membrane fuel cells.Quantifying the extent of carbon corrosion is essential for advancing the technology and implementing effective mitigation strategies.While studying degradation events directly within a real-world fuel cell vehicle offers the most reliable insights,the high costs and time demands make it necessary to develop specialised experimental techniques that provide high-resolution data more efficiently and cost-effectively.This review explores the various experimental approaches utilised in automotive application induced carbon corrosion studies globally,including load profiles,test setups,break-in procedures,and cell recovery protocols.In this paper,emphasis is placed on the standardised procedures proposed by leading institutions worldwide,accompanied by critical discussions on these protocols.Furthermore,the paper highlights modified or innovative procedures developed by smaller institutions,universities,and individual researchers,thereby offering a comprehensive overview essential for carbon corrosion analysis.The review also discusses the fundamental principles,benefits,and limitations of various procedures,offering guidance on selecting the most appropriate approach for a given study.Lastly,it addresses the limitations within the current body of literature and outlines potential future prospects.
文摘A simple procedure to plan, verify and implement craniospinal irradiation（CSI） with patients supine is presented. Treatment is conducted with a single posterior spinal field abutting two lateral cranial fields. The opposed lateral fields are half-blocked and the inferior line is perpendicular. The posterior field uses some fixed field parameters so that the cephalad edge of the posterior field is coplanar with the caudal edges of the lateral fields and it is independent of the height of the couch. A steel-shot ball is used to measure the size of overlap or gap at the junction using portal images of an electron portal image device or portal films. The results of analyzing the portal images show that the errors of the junction are within ± 1 mm. The dose-volume histograms （DVHs）show that there are not unbearable hot or cold spots in the clinic target volumes （CTVs）. Supine craniospinal treatment is a reliable and convenient alternative to treatment in the prone position and avoids the technical difficulties of the latter. The use of fixed field geometry greatly facilitates treatment planning and effectively reduces the amount of time of setup, verification and treatment.
基金This work was jointly supported by the National Key Research and Development Program of China(No.2016YFA0401600)National Natural Science Foundation of China(Nos.11235012 and 12035017)+1 种基金the CSNS Engineering Projectthe Back-n Collaboration Consortium fund。
文摘Back-streaming neutrons from the spallation target of the China Spallation Neutron Source(CSNS)that emit through the incoming proton channel were exploited to build a white neutron beam facility(the so-called Back-n white neutron source),which was completed in March 2018.The Back-n neutron beam is very intense,at approximately 29107 n/cm2/s at 55 m from the target,and has a nominal proton beam with a power of 100 kW in the CSNS-I phase and a kinetic energy of 1.6 GeV and a thick tungsten target in multiple slices with modest moderation from the cooling water through the slices.In addition,the excellent energy spectrum spanning from 0.5 eV to 200 MeV,and a good time resolution related tothe time-of-flight measurements make it a typical white neutron source for nuclear data measurements;its overall performance is among that of the best white neutron sources in the world.Equipped with advanced spectrometers,detectors,and application utilities,the Back-n facility can serve wide applications,with a focus on neutron-induced cross-sectional measurements.This article presents an overview of the neutron beam characteristics,the experimental setups,and the ongoing applications at Backn.
基金The National Natural Science Foundation of China under contract No. 40266001
文摘With the tides propagating from the open sea to the lagoon, the mean water level （MWL） in the inlet and lagoon becomes different from that at the open sea, and a setup/setdown is generated. The change of MWL （setup/setdown） in the system imposes a great impact on regulating the development of tidal marshes, on determining the long-term water level for harbor maintenance, on the planning for the water front development with the flood control for the possible inundation, and on the interpretation of the historical sea level change when using tidal marsh peat deposits in the lagoon as the indicator for open sea＇ s sea level. In this case study on the mechanisms which control the setup/setdown in Xincun Inlet, Hainan in China, the 2-D barotropic mode of Eulerian - Lagrangian CIRCulation （ELCIRC） model was utilized. After model calibration and verification, a series of numerical experiments were conducted to examine the effects of bottom friction and advection terms, wetting and drying of intertidal areas, bathymetry and boundary conditions on the setup/setdown in the system. The modeling results show that setup occurs over the inlet and lagoon areas with an order of one tenth of the tide range at the entrance. The larger the bottom friction is, a larger setup is generated. Without the advection term, the setup is reduced clue to a decrease of water level gradient to compensate for the disappearance of the advection term. Even without overtides, a setup can still be developed in the system. Sea level rise and dredging in the inlet and tidal channel can cause a decrease of setup in the system, whereas shoaling of the system can increase the setup. The uniqueness of the Xincun Inlet with respect to MWL change is that there is no evident setdown in the inlet, which can be attributed to the complex geometry and bathymetry associated with the inlet system.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.11572130 and 41106031)
文摘Complex factors including steep slopes, intense wave breaking, large bottom friction and remarkable wave setup should be considered while studying wave propagation over coral reefs, and how to simulate wave propagation and setup on coral reefs efficiently has become a primary focus. Several wave models can be used on coral reefs as have been published, but further testing and comparison of the reliability and applicability of these models are needed. A comparative study of four numerical wave models (i.e., FUNWAVE-TVD, Coulwave, NHWAVE and ZZL18) is carried out in this paper. These models’ governing equations and numerical methods are compared and analyzed firstly to obtain their differences and connections;then the simulation effects of the four wave models are tested in four representative laboratory experiments. The results show that all four models can reasonably predict the spectrum transformation. Coulwave, NHWAVE and ZZL18 can predict the wave height variation more accurately;Coulwave and FUNWAVE-TVD tend to underestimate wave setup on the reef top induced by spilling breaker, while NHWAVE and ZZL18 can predict wave setup relatively accurately for all types of breakers;NHWAVE and ZZL18 can predict wave reflection by steep reef slope more accurately. This study can provide evidence for choosing suitable models for practical engineering or establishing new models.
文摘Objective: To examine the trajectory of psychosomatic symptoms and to explore the impact of psychosomatic symptoms on setup error in patients undergoing breast cancer radiotherapy.Methods: A total of 102 patients with early breast cancer who received initial radiotherapy were consecutively recruited. The M.D. Anderson Symptom Inventory(MDASI) and three different anxiety scales, i.e., the Self-Rating Anxiety Scale(SAS), State-Trait Anxiety Inventory(STAI), and Anxiety Sensitivity Index(ASI), were used in this study. The radiotherapy setup errors were measured in millimetres by comparing the real-time isocratic verification film during radiotherapy with the digitally reconstructed radiograph(DRR). Patients completed the assessment at three time points: before the initial radiotherapy(T1), before the middle radiotherapy(T2), and before the last radiotherapy(T3).Results: The SAS and STAI-State scores of breast cancer patients at T1 were significantly higher than those at T2 and T3(F=24.44, P<0.001;F=30.25, P<0.001). The core symptoms of MDASI were positively correlated with anxiety severity. The setup errors of patients with high SAS scores were greater than those of patients with low anxiety levels at T1(Z=-2.01, P=0.044). We also found that higher SAS scores were associated with a higher risk of radiotherapy setup errors at T1(B=0.458, P<0.05).Conclusions: This study seeks to identify treatment-related psychosomatic symptoms and mitigate their impact on patients and treatment. Patients with early breast cancer experienced the highest level of anxiety before the initial radiotherapy, and then, anxiety levels declined. Patients with high somatic symptoms of anxiety may have a higher risk of radiotherapy setup errors.
