To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework ba...To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework based on face-pedestrian joint feature modeling.By constructing a joint tracking model centered on“intra-class independent tracking+cross-category dynamic binding”,designing a multi-modal matching metric with spatio-temporal and appearance constraints,and innovatively introducing a cross-category feature mutual verification mechanism and a dual matching strategy,this work effectively resolves performance degradation in traditional single-category tracking methods caused by short-term occlusion,cross-camera tracking,and crowded environments.Experiments on the Chokepoint_Face_Pedestrian_Track test set demonstrate that in complex scenes,the proposed method improves Face-Pedestrian Matching F1 area under the curve(F1 AUC)by approximately 4 to 43 percentage points compared to several traditional methods.The joint tracking model achieves overall performance metrics of IDF1:85.1825%and MOTA:86.5956%,representing improvements of 0.91 and 0.06 percentage points,respectively,over the baseline model.Ablation studies confirm the effectiveness of key modules such as the Intersection over Area(IoA)/Intersection over Union(IoU)joint metric and dynamic threshold adjustment,validating the significant role of the cross-category identity matching mechanism in enhancing tracking stability.Our_model shows a 16.7%frame per second(FPS)drop vs.fairness of detection and re-identification in multiple object tracking(FairMOT),with its cross-category binding module adding aboute 10%overhead,yet maintains near-real-time performance for essential face-pedestrian tracking at small resolutions.展开更多
This study aims to establish an integrated sensitivity analysis framework for optimization and design of the dynamic performance of mechanical systems such as tracked vehicles,by combining the direct differentiation m...This study aims to establish an integrated sensitivity analysis framework for optimization and design of the dynamic performance of mechanical systems such as tracked vehicles,by combining the direct differentiation method(DDM)with the linear multibody system transfer matrix method(linear MSTMM).The rigid-flexible coupled multibody system dynamics model of a tracked vehicle is established using the linear MSTMM and validated through the modal test.Building upon the existing DDM-based eigenvalue sensitivity analysis method within the linear MSTMM,the DDM is embedded into it to enable programmable and efficient computation of dynamic response sensitivities for mechanical systems.The proposed approach is used to quantitatively evaluate the sensitivities of both natural vibration characteristics(e.g.,natural frequencies and mode shapes)and transient dynamic responses of the tracked vehicle with respect to system parameters,successfully identifying critical structural parameters.Compared to conventional finite difference methods,the developed methodology eliminates sensitivity to perturbation step sizes.The contributions of this work lie in establishing a unified theoretical foundation and analysis framework for guiding dynamics optimization and design of mechanical systems,and extending the applicability of the linear MSTMM to sensitivity analysis of transient dynamic responses.展开更多
An improved estimation of motion vectors of feature points is proposed for tracking moving objects of dynamic image sequence. Feature points are firstly extracted by the improved minimum intensity change （MIC） algor...An improved estimation of motion vectors of feature points is proposed for tracking moving objects of dynamic image sequence. Feature points are firstly extracted by the improved minimum intensity change （MIC） algorithm. The matching points of these feature points are then determined by adaptive rood pattern searching. Based on the random sample consensus （RANSAC） method, the background motion is finally compensated by the parameters of an affine transform of the background motion. With reasonable morphological filtering, the moving objects are completely extracted from the background, and then tracked accurately. Experimental results show that the improved method is successful on the motion background compensation and offers great promise in tracking moving objects of the dynamic image sequence.展开更多
Mobile service robots(MSRs)in hospital environments require precise and robust trajectory tracking to ensure reliable operation under dynamic conditions,including model uncertainties and external disturbances.This stu...Mobile service robots(MSRs)in hospital environments require precise and robust trajectory tracking to ensure reliable operation under dynamic conditions,including model uncertainties and external disturbances.This study presents a cognitive control strategy that integrates a Numerical Feedforward Inverse Dynamic Controller(NFIDC)with a Feedback Radial Basis Function Neural Network(FRBFNN).The robot’s mechanical structure was designed in SolidWorks 2022 SP2.0 and validated under operational loads using finite element analysis in ANSYS 2022 R1.The NFIDC-FRBFNN framework merges proactive inverse dynamic compensation with adaptive neural learning to achieve smooth torque responses and accurate motion control.A two-stage simulation evaluation was conducted.In the first stage,the controller was tested in a simulated hospital environment under both ideal and non-ideal conditions.In the second,it was benchmarked against four established controllers-Neural Network Model Reference Adaptive(NNMRA),Z-number Fuzzy Logic(Z-FL),Adaptive Dynamic Controller(ADC),and Fuzzy Logic-PID(FL-PID)—using circular and lemniscate trajectories.Across ten runs,the proposed controller achieved the lowest tracking errors under all conditions.Under ideal conditions,it achieved average improvements of 55.24%,75.75%,and 55.20%in integral absolute error(IAE),integral squared error(ISE),and mean absolute error(MAE),respectively,with coefficient of variation(CV)reductions above 55%.Under non-ideal conditions,average improvements exceeded 64%in IAE,77%in ISE,and 66%in MAE,while maintaining CV reductions above 57%.These results confirm that the NFIDC-FRBFNN controller offers superior accuracy,robustness,and consistency for real-time path tracking in healthcare robotics.展开更多
The wheel-rail dynamic load(WRL)and its vibration energy transfer(VET)are foundational for studying ballastless track dynamics in high-speed railways.In this study,the higher-order modal parameters of track beds with ...The wheel-rail dynamic load(WRL)and its vibration energy transfer(VET)are foundational for studying ballastless track dynamics in high-speed railways.In this study,the higher-order modal parameters of track beds with different isolating layers were identified experimentally and a vehicle-track coupled dynamic model considering track bed broadband vibrations(TBBVs)was established.The WRL and its VET were investigated,and the contribution law as well as the influence mechanism of TBBVs on them was determined.The results showed the WRL and track bed vibration energy exhibited significant resonances,with more prominent high-frequency resonance peaks in the track bed vibration energy.TBBVs had a significant effect on low-frequency WRLs,and markedly influenced the VET across various frequency bands.Intense low-frequency and weak high-frequency intermodulation effects between the wheel-rail and track beds were observed.The effect of track bed vibrations can be disregarded when focusing on high-frequency WRLs above 200 Hz.Variations in the isolating layer stiffness have more significant effects on the track bed vibration energy than the WRL.Rational stiffness of the isolating layer should be selected to avoid mode-coupling resonance from track beds to the wheel-rail subsystem.展开更多
Rolling noise is an important source of railway noise and depends also on the dynamic behaviour of a railway track.This is characterized by the point or transfer mobility and the track decay rate,which depend on a num...Rolling noise is an important source of railway noise and depends also on the dynamic behaviour of a railway track.This is characterized by the point or transfer mobility and the track decay rate,which depend on a number of track parameters.One possible reason for deviations between simulated and measured results for the dynamic track behaviour is the uncertainty of the value of some track parameters used as input for the simulation.This in turn results in an uncertainty in the simulation results.In this contribution,it is proposed to use the general transformation method to assess a uncertainty band for the results.Most relevant input parameters for determining the point input mobility and the track decay rate for a ballasted track are analysed with regard to the uncertainties and for the value of each an interval is determined.Then,the general transformation method is applied to four different simulation methods,working both in the frequency and time domains.For one example track,the resulting uncertainty bands are compared to one dataset with measurements for the point mobility and the track decay rate.In addition,a sensitivity analysis is performed to determine the parameters that significantly influence the overall result.While all four simulation methods produce broad uncertainty bands for the results,none did match the measured results for the point mobility and the track decay rate over the entire frequency range considered.Besides the large influence of the uncertain pad stiffness,it turned out that the rail wear is also a significant source of uncertainty of the results.Overall,it is demonstrated that the proposed approach allows assessing the influence of uncertain input parameters in detail.展开更多
On-orbit spacecraft face many threats,such as collisions with debris or other spacecraft.Therefore,perception of the surrounding space environment is vitally important for on-orbit spacecraft.Spacecraft require a dyna...On-orbit spacecraft face many threats,such as collisions with debris or other spacecraft.Therefore,perception of the surrounding space environment is vitally important for on-orbit spacecraft.Spacecraft require a dynamic attitude tracking ability with high precision for such missions.This paper aims to address the above problem using an improved backstepping controller.The tracking mission is divided into two phases:coarse alignment and fine alignment.In the first phase,a traditional saturation controller is utilized to limit the maximum attitude angular velocity according to the actuator’s ability.For the second phase,the proposed backstepping controller with different virtual control inputs is applied to track the moving target.To fulfill the high precision attitude tracking requirements,a hybrid attitude control actuator consisting of a Control Moment Gyro(CMG)and Reaction Wheel(RW)is constructed,which can simultaneously avoid the CMG singularity and RW saturation through the use of an angular momentum optimal management strategy,such as null motion.Finally,five simulation scenarios were carried out to demonstrate the effectiveness of the proposed control strategy and hybrid actuator.展开更多
In this paper, formation tracking control problems for second-order multi-agent systems（MASs） with time-varying delays are studied, specifically those where the position and velocity of followers are designed to for...In this paper, formation tracking control problems for second-order multi-agent systems（MASs） with time-varying delays are studied, specifically those where the position and velocity of followers are designed to form a time-varying formation while tracking those of the leader. A neighboring relative state information based formation tracking protocol with an unknown gain matrix and time-varying delays is presented. The formation tracking problems are then transformed into asymptotically stable problems. Based on the Lyapunov-Krasovskii functional approach, conditions sufficient for second-order MASs with time-varying delays to realize formation tracking are examined. An approach to obtain the unknown gain matrix is given and, since neighboring relative velocity information is difficult to measure in practical applications, a formation tracking protocol with time-varying delays using only neighboring relative position information is introduced. The proposed results can be used on target enclosing problems for MASs with second-order dynamics and time-varying delays. An application for target enclosing by multiple unmanned aerial vehicles（UAVs） is given to demonstrate the feasibility of theoretical results.展开更多
In order to solve the problem of trajectory tracking for a class of novel serial-parallel hybrid humanoid arm（HHA）, which has parameters uncertainty, frictions, disturbance, abrasion and pulse forces derived from mo...In order to solve the problem of trajectory tracking for a class of novel serial-parallel hybrid humanoid arm（HHA）, which has parameters uncertainty, frictions, disturbance, abrasion and pulse forces derived from motors, a multistep dynamics modeling strategy is proposed and a robust controller based on neural network（NN）-adaptive algorithm is designed. At the first step of dynamics modeling, the dynamics model of the reduced HHA is established by Lagrange method. At the second step of dynamics modeling, the parameter uncertain part resulting mainly from the idealization of the HHA is learned by adaptive algorithm. In the trajectory tracking controller, the radial basis function（RBF） NN, whose optimal weights are learned online by adaptive algorithm, is used to learn the upper limit function of the total uncertainties including frictions, disturbances, abrasion and pulse forces. To a great extent, the conservatism of this robust trajectory tracking controller is reduced, and by this controller the HHA can impersonate mostly human actions. The proof and simulation results testify the validity of the adaptive strategy for parameter learning and the neural network-adaptive strategy for the trajectory tracking control.展开更多
A carrier tracking loop which can adjust the loop parameters adaptively is proposed for high dynamic application. Three modules, called the α-β-γT filter model, adaptive loop structure mod- el and adaptive loop ban...A carrier tracking loop which can adjust the loop parameters adaptively is proposed for high dynamic application. Three modules, called the α-β-γT filter model, adaptive loop structure mod- el and adaptive loop bandwidth model respectively, are added in the presented tracking loop com- pared with the traditional carrier tracking loop based on the second-order frequency lock loop （FLL） assisting third-order phase lock loop （PLL） loop filter. And the optimization methods for the track- ing bandwidth and the carrier loop order are analyzed. The real-time estimation methods of the dy- namic parameters, the velocity, acceleration and jerk along the line of sight （LOS） between the sat- ellite and the receiver＇ s antenna, and the measurement parameters are discussed based on the pres- ented α-β-γ filter algorithm. A method is introduced to improve the filter＇ s dynamic response to meet high dynamic application by self-adjusted α-β-γ filter coefficient used in the tracking loop. The performance of three cases with different carrier tracking loop is compared by simulation.展开更多
While different species in nature have safely solved the problem of navigation in a dynamic environment, this remains a challenging task for researchers around the world. The paper addresses the problem of autonomous ...While different species in nature have safely solved the problem of navigation in a dynamic environment, this remains a challenging task for researchers around the world. The paper addresses the problem of autonomous navigation in an unknown dynamic environment for a single and a group of three wheeled omnidirectional mobile robots(TWOMRs). The robot has to track a dynamic target while avoiding dynamic obstacles and dynamic walls in an unknown and very dense environment. It adopts a behavior-based controller that consists of four behaviors: "target tracking", "obstacle avoidance", "dynamic wall following" and "avoid robots". The paper considers the problem of kinematic saturation. In addition, it introduces a strategy for predicting the velocity of dynamic obstacles based on two successive measurements of the ultrasonic sensors to calculate the velocity of the obstacle expressed in the sensor frame. Furthermore, the paper proposes a strategy to deal with dynamic walls even when they have U-like or V-like shapes. The approach can also deal with the formation control of a group of robots based on the leader-follower structure and the behavior-based control, where the robots have to get together and maintain a given formation while navigating toward the target, avoiding obstacles and walls in a dynamic environment. The effectiveness of the proposed approaches is demonstrated via simulation.展开更多
The trajectory tracking control problem for underactuated unmanned surface vehicles(USV) was addressed, and the control system took account of the uncertain influences induced by model perturbation, external disturban...The trajectory tracking control problem for underactuated unmanned surface vehicles(USV) was addressed, and the control system took account of the uncertain influences induced by model perturbation, external disturbance, etc. By introducing the reference, trajectory was generated by a virtual USV, and the error equation of trajectory tracking for USV was obtained, which transformed the tracking problem of underactuated USV into the stabilization problem of the trajectory tracking error equation. A backstepping adaptive sliding mode controller was proposed based on backstepping technology and method of dynamic slide model control. By means of theoretical analysis, it is proved that the proposed controller ensures that the solutions of closed loop system have the ultimate boundedness property. Simulation results are presented to illustrate the effectiveness of the proposed controller.展开更多
This paper studies the problem of optimal parallel tracking control for continuous-time general nonlinear systems.Unlike existing optimal state feedback control,the control input of the optimal parallel control is int...This paper studies the problem of optimal parallel tracking control for continuous-time general nonlinear systems.Unlike existing optimal state feedback control,the control input of the optimal parallel control is introduced into the feedback system.However,due to the introduction of control input into the feedback system,the optimal state feedback control methods can not be applied directly.To address this problem,an augmented system and an augmented performance index function are proposed firstly.Thus,the general nonlinear system is transformed into an affine nonlinear system.The difference between the optimal parallel control and the optimal state feedback control is analyzed theoretically.It is proven that the optimal parallel control with the augmented performance index function can be seen as the suboptimal state feedback control with the traditional performance index function.Moreover,an adaptive dynamic programming(ADP)technique is utilized to implement the optimal parallel tracking control using a critic neural network(NN)to approximate the value function online.The stability analysis of the closed-loop system is performed using the Lyapunov theory,and the tracking error and NN weights errors are uniformly ultimately bounded(UUB).Also,the optimal parallel controller guarantees the continuity of the control input under the circumstance that there are finite jump discontinuities in the reference signals.Finally,the effectiveness of the developed optimal parallel control method is verified in two cases.展开更多
A new seam-tracking method based on dynamic trajectory planning for a mobile welding robot is proposed in order to improve the response lag of the mobile robot and the high frequency oscillation in seam-tracking.By us...A new seam-tracking method based on dynamic trajectory planning for a mobile welding robot is proposed in order to improve the response lag of the mobile robot and the high frequency oscillation in seam-tracking.By using a front-placed laser-based vision sensor to dynamically extract the location of the weld seam in front of torch,the trend and direction of the weld line is roughly obtained.The robot system autonomously and dynamically performs trajectory planning based on the isometric approximation model.Arc sensor technology is applied to detect the offset during welding process in real time.The dynamic compensation of the weld path is done in combination with the control of the mobile robot and the executive body installed on it.Simulated and experimental results demonstrate that the method effectively increases the stability of welding speed and smoothness of the weld track,and hence the weld formation in curves and corners is improved.展开更多
Multi-target tracking(MTT) is a research hotspot of wireless sensor networks at present.A self-organized dynamic cluster task allocation scheme is used to implement collaborative task allocation for MTT in WSN and a s...Multi-target tracking(MTT) is a research hotspot of wireless sensor networks at present.A self-organized dynamic cluster task allocation scheme is used to implement collaborative task allocation for MTT in WSN and a special cluster member(CM) node selection method is put forward in the scheme.An energy efficiency model was proposed under consideration of both energy consumption and remaining energy balance in the network.A tracking accuracy model based on area-sum principle was also presented through analyzing the localization accuracy of triangulation.Then,the two models mentioned above were combined to establish dynamic cluster member selection model for MTT where a comprehensive performance index function was designed to guide the CM node selection.This selection was fulfilled using genetic algorithm.Simulation results show that this method keeps both energy efficiency and tracking quality in optimal state,and also indicate the validity of genetic algorithm in implementing CM node selection.展开更多
This paper tackles the formation-containment control problem of fixed-wing unmanned aerial vehicle(UAV)swarm with model uncertainties for dynamic target tracking in three-dimensional space in the faulty case of UAVs’...This paper tackles the formation-containment control problem of fixed-wing unmanned aerial vehicle(UAV)swarm with model uncertainties for dynamic target tracking in three-dimensional space in the faulty case of UAVs’actuator and sensor.The fixed-wing UAV swarm under consideration is organized as a“multi-leader-multi-follower”structure,in which only several leaders can obtain the dynamic target information while others only receive the neighbors’information through the communication network.To simultaneously realize the formation,containment,and dynamic target tracking,a two-layer control framework is adopted to decouple the problem into two subproblems:reference trajectory generation and trajectory tracking.In the upper layer,a distributed finite-time estimator(DFTE)is proposed to generate each UAV’s reference trajectory in accordance with the control objective.Subsequently,a distributed composite robust fault-tolerant trajectory tracking controller is developed in the lower layer,where a novel adaptive extended super-twisting(AESTW)algorithm with a finite-time extended state observer(FTESO)is involved in solving the robust trajectory tracking control problem under model uncertainties,actuator,and sensor faults.The proposed controller simultaneously guarantees rapidness and enhances the system’s robustness with fewer chattering effects.Finally,corresponding simulations are carried out to demonstrate the effectiveness and competitiveness of the proposed two-layer fault-tolerant cooperative control scheme.展开更多
In this study,the bipartite time-varying output formation tracking problem for heterogeneous multi-agent systems(MASs)with multiple leaders and switching commu-nication networks is considered.Note that the switching c...In this study,the bipartite time-varying output formation tracking problem for heterogeneous multi-agent systems(MASs)with multiple leaders and switching commu-nication networks is considered.Note that the switching communication networks may be connected or disconnected.To address this problem,a novel reduced-dimensional observer-based fully distributed asynchronous dynamic edge-event-triggered output feedback control protocol is developed,and the Zeno behavior is ruled out.The theoretical analysis gives the admissible switching frequency and switching width under the proposed control protocol.Different from the existing works,the control protocol reduces the dimension of information to be transmitted between neighboring agents.Moreover,since an additional positive internal dynamic variable is introduced into the triggering functions,the control protocol can guarantee a larger inter-event time interval compared with previous results.Finally,a simulation example is given to verify the effectiveness and performance of the theoretical result.展开更多
In this paper,a stochastic linear quadratic optimal tracking scheme is proposed for unknown linear discrete-time(DT)systems based on adaptive dynamic programming(ADP)algorithm.First,an augmented system composed of the...In this paper,a stochastic linear quadratic optimal tracking scheme is proposed for unknown linear discrete-time(DT)systems based on adaptive dynamic programming(ADP)algorithm.First,an augmented system composed of the original system and the command generator is constructed and then an augmented stochastic algebraic equation is derived based on the augmented system.Next,to obtain the optimal control strategy,the stochastic case is converted into the deterministic one by system transformation,and then an ADP algorithm is proposed with convergence analysis.For the purpose of realizing the ADP algorithm,three back propagation neural networks including model network,critic network and action network are devised to guarantee unknown system model,optimal value function and optimal control strategy,respectively.Finally,the obtained optimal control strategy is applied to the original stochastic system,and two simulations are provided to demonstrate the effectiveness of the proposed algorithm.展开更多
A novel method combining visualization particle tracking with image-based dynamic light scattering was developed to achieve the in situ and real-time size measurement of nanobubbles(NBs).First,the in situ size distrib...A novel method combining visualization particle tracking with image-based dynamic light scattering was developed to achieve the in situ and real-time size measurement of nanobubbles(NBs).First,the in situ size distribution of NBs was visualized by dark-field microscopy.Then,real-time size during the preparation was measured using image-based dynamic light scattering,and the longitudinal size distribution of NBs in the sample cell was obtained in a steady state.Results show that this strategy can provide a detailed and accurate size of bubbles in the whole sample compared with the commercial ZetaSizer Nano equipment.Therefore,the developed method is a real-time and simple technology with excellent accuracy,providing new insights into the accurate measurement of the size distribution of NBs or nanoparticles in solution.展开更多
With photoelectric tracking system as the research object,based on the theorem of moment of momentum and Euler dynamic equation,Nonlinear biaxial coupling dynamic model of tracking turntable is established.Effects of ...With photoelectric tracking system as the research object,based on the theorem of moment of momentum and Euler dynamic equation,Nonlinear biaxial coupling dynamic model of tracking turntable is established.Effects of moment of inertia coupling,speed coupling and the dynamic coupling between tracking turntable shafts were studied,the analytical relation between them was given in theory.Verify the change trend of theoretical model.And it provides the theory reference and model base,for the future design of the high precision tracking controller And control parameter selection and optimization.In the end,specific measures are made for structure optimization.展开更多
基金supported by the confidential research grant No.a8317。
文摘To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework based on face-pedestrian joint feature modeling.By constructing a joint tracking model centered on“intra-class independent tracking+cross-category dynamic binding”,designing a multi-modal matching metric with spatio-temporal and appearance constraints,and innovatively introducing a cross-category feature mutual verification mechanism and a dual matching strategy,this work effectively resolves performance degradation in traditional single-category tracking methods caused by short-term occlusion,cross-camera tracking,and crowded environments.Experiments on the Chokepoint_Face_Pedestrian_Track test set demonstrate that in complex scenes,the proposed method improves Face-Pedestrian Matching F1 area under the curve(F1 AUC)by approximately 4 to 43 percentage points compared to several traditional methods.The joint tracking model achieves overall performance metrics of IDF1:85.1825%and MOTA:86.5956%,representing improvements of 0.91 and 0.06 percentage points,respectively,over the baseline model.Ablation studies confirm the effectiveness of key modules such as the Intersection over Area(IoA)/Intersection over Union(IoU)joint metric and dynamic threshold adjustment,validating the significant role of the cross-category identity matching mechanism in enhancing tracking stability.Our_model shows a 16.7%frame per second(FPS)drop vs.fairness of detection and re-identification in multiple object tracking(FairMOT),with its cross-category binding module adding aboute 10%overhead,yet maintains near-real-time performance for essential face-pedestrian tracking at small resolutions.
基金supported by the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20241443)the Jiangsu Funding Program for Excellent Postdoctoral Talent(Grant No.2024ZB072)the National Natural Science Foundation of China(Grant No.92266201).
文摘This study aims to establish an integrated sensitivity analysis framework for optimization and design of the dynamic performance of mechanical systems such as tracked vehicles,by combining the direct differentiation method(DDM)with the linear multibody system transfer matrix method(linear MSTMM).The rigid-flexible coupled multibody system dynamics model of a tracked vehicle is established using the linear MSTMM and validated through the modal test.Building upon the existing DDM-based eigenvalue sensitivity analysis method within the linear MSTMM,the DDM is embedded into it to enable programmable and efficient computation of dynamic response sensitivities for mechanical systems.The proposed approach is used to quantitatively evaluate the sensitivities of both natural vibration characteristics(e.g.,natural frequencies and mode shapes)and transient dynamic responses of the tracked vehicle with respect to system parameters,successfully identifying critical structural parameters.Compared to conventional finite difference methods,the developed methodology eliminates sensitivity to perturbation step sizes.The contributions of this work lie in establishing a unified theoretical foundation and analysis framework for guiding dynamics optimization and design of mechanical systems,and extending the applicability of the linear MSTMM to sensitivity analysis of transient dynamic responses.
文摘An improved estimation of motion vectors of feature points is proposed for tracking moving objects of dynamic image sequence. Feature points are firstly extracted by the improved minimum intensity change （MIC） algorithm. The matching points of these feature points are then determined by adaptive rood pattern searching. Based on the random sample consensus （RANSAC） method, the background motion is finally compensated by the parameters of an affine transform of the background motion. With reasonable morphological filtering, the moving objects are completely extracted from the background, and then tracked accurately. Experimental results show that the improved method is successful on the motion background compensation and offers great promise in tracking moving objects of the dynamic image sequence.
基金supported by the Malaysia Ministry of Higher Education under Fundamental Research Grant Scheme with Project Code:FRGS/1/2024/TK07/USM/02/3.
文摘Mobile service robots(MSRs)in hospital environments require precise and robust trajectory tracking to ensure reliable operation under dynamic conditions,including model uncertainties and external disturbances.This study presents a cognitive control strategy that integrates a Numerical Feedforward Inverse Dynamic Controller(NFIDC)with a Feedback Radial Basis Function Neural Network(FRBFNN).The robot’s mechanical structure was designed in SolidWorks 2022 SP2.0 and validated under operational loads using finite element analysis in ANSYS 2022 R1.The NFIDC-FRBFNN framework merges proactive inverse dynamic compensation with adaptive neural learning to achieve smooth torque responses and accurate motion control.A two-stage simulation evaluation was conducted.In the first stage,the controller was tested in a simulated hospital environment under both ideal and non-ideal conditions.In the second,it was benchmarked against four established controllers-Neural Network Model Reference Adaptive(NNMRA),Z-number Fuzzy Logic(Z-FL),Adaptive Dynamic Controller(ADC),and Fuzzy Logic-PID(FL-PID)—using circular and lemniscate trajectories.Across ten runs,the proposed controller achieved the lowest tracking errors under all conditions.Under ideal conditions,it achieved average improvements of 55.24%,75.75%,and 55.20%in integral absolute error(IAE),integral squared error(ISE),and mean absolute error(MAE),respectively,with coefficient of variation(CV)reductions above 55%.Under non-ideal conditions,average improvements exceeded 64%in IAE,77%in ISE,and 66%in MAE,while maintaining CV reductions above 57%.These results confirm that the NFIDC-FRBFNN controller offers superior accuracy,robustness,and consistency for real-time path tracking in healthcare robotics.
基金supported by the National Natural Science Foundation of China(No.52308468)the China Postdoctoral Science Foundation(No.2022M723390)the Jiangsu Provincial Excellent Postdoctoral Program(No.2023ZB020),China.
文摘The wheel-rail dynamic load(WRL)and its vibration energy transfer(VET)are foundational for studying ballastless track dynamics in high-speed railways.In this study,the higher-order modal parameters of track beds with different isolating layers were identified experimentally and a vehicle-track coupled dynamic model considering track bed broadband vibrations(TBBVs)was established.The WRL and its VET were investigated,and the contribution law as well as the influence mechanism of TBBVs on them was determined.The results showed the WRL and track bed vibration energy exhibited significant resonances,with more prominent high-frequency resonance peaks in the track bed vibration energy.TBBVs had a significant effect on low-frequency WRLs,and markedly influenced the VET across various frequency bands.Intense low-frequency and weak high-frequency intermodulation effects between the wheel-rail and track beds were observed.The effect of track bed vibrations can be disregarded when focusing on high-frequency WRLs above 200 Hz.Variations in the isolating layer stiffness have more significant effects on the track bed vibration energy than the WRL.Rational stiffness of the isolating layer should be selected to avoid mode-coupling resonance from track beds to the wheel-rail subsystem.
文摘Rolling noise is an important source of railway noise and depends also on the dynamic behaviour of a railway track.This is characterized by the point or transfer mobility and the track decay rate,which depend on a number of track parameters.One possible reason for deviations between simulated and measured results for the dynamic track behaviour is the uncertainty of the value of some track parameters used as input for the simulation.This in turn results in an uncertainty in the simulation results.In this contribution,it is proposed to use the general transformation method to assess a uncertainty band for the results.Most relevant input parameters for determining the point input mobility and the track decay rate for a ballasted track are analysed with regard to the uncertainties and for the value of each an interval is determined.Then,the general transformation method is applied to four different simulation methods,working both in the frequency and time domains.For one example track,the resulting uncertainty bands are compared to one dataset with measurements for the point mobility and the track decay rate.In addition,a sensitivity analysis is performed to determine the parameters that significantly influence the overall result.While all four simulation methods produce broad uncertainty bands for the results,none did match the measured results for the point mobility and the track decay rate over the entire frequency range considered.Besides the large influence of the uncertain pad stiffness,it turned out that the rail wear is also a significant source of uncertainty of the results.Overall,it is demonstrated that the proposed approach allows assessing the influence of uncertain input parameters in detail.
基金the support provided by the National Natural Science Foundation of China(No.61973153)the National Key Research and Development Plan of China(No.2016YFB0500901)the Open Fund of the National Defense Key Discipline Laboratory of Micro-Spacecraft Technology of China(No.HIT.KLOF.MST.201705)
文摘On-orbit spacecraft face many threats,such as collisions with debris or other spacecraft.Therefore,perception of the surrounding space environment is vitally important for on-orbit spacecraft.Spacecraft require a dynamic attitude tracking ability with high precision for such missions.This paper aims to address the above problem using an improved backstepping controller.The tracking mission is divided into two phases:coarse alignment and fine alignment.In the first phase,a traditional saturation controller is utilized to limit the maximum attitude angular velocity according to the actuator’s ability.For the second phase,the proposed backstepping controller with different virtual control inputs is applied to track the moving target.To fulfill the high precision attitude tracking requirements,a hybrid attitude control actuator consisting of a Control Moment Gyro(CMG)and Reaction Wheel(RW)is constructed,which can simultaneously avoid the CMG singularity and RW saturation through the use of an angular momentum optimal management strategy,such as null motion.Finally,five simulation scenarios were carried out to demonstrate the effectiveness of the proposed control strategy and hybrid actuator.
基金co-supported by the National Natural Science Foundation of China (Nos. 61333011, 91216304 and 61121003)
文摘In this paper, formation tracking control problems for second-order multi-agent systems（MASs） with time-varying delays are studied, specifically those where the position and velocity of followers are designed to form a time-varying formation while tracking those of the leader. A neighboring relative state information based formation tracking protocol with an unknown gain matrix and time-varying delays is presented. The formation tracking problems are then transformed into asymptotically stable problems. Based on the Lyapunov-Krasovskii functional approach, conditions sufficient for second-order MASs with time-varying delays to realize formation tracking are examined. An approach to obtain the unknown gain matrix is given and, since neighboring relative velocity information is difficult to measure in practical applications, a formation tracking protocol with time-varying delays using only neighboring relative position information is introduced. The proposed results can be used on target enclosing problems for MASs with second-order dynamics and time-varying delays. An application for target enclosing by multiple unmanned aerial vehicles（UAVs） is given to demonstrate the feasibility of theoretical results.
基金supported by National Basic Research and Development Program of China (973 Program, Grant No. 2006CB705402)
文摘In order to solve the problem of trajectory tracking for a class of novel serial-parallel hybrid humanoid arm（HHA）, which has parameters uncertainty, frictions, disturbance, abrasion and pulse forces derived from motors, a multistep dynamics modeling strategy is proposed and a robust controller based on neural network（NN）-adaptive algorithm is designed. At the first step of dynamics modeling, the dynamics model of the reduced HHA is established by Lagrange method. At the second step of dynamics modeling, the parameter uncertain part resulting mainly from the idealization of the HHA is learned by adaptive algorithm. In the trajectory tracking controller, the radial basis function（RBF） NN, whose optimal weights are learned online by adaptive algorithm, is used to learn the upper limit function of the total uncertainties including frictions, disturbances, abrasion and pulse forces. To a great extent, the conservatism of this robust trajectory tracking controller is reduced, and by this controller the HHA can impersonate mostly human actions. The proof and simulation results testify the validity of the adaptive strategy for parameter learning and the neural network-adaptive strategy for the trajectory tracking control.
基金Supported by the Ministerial Level Foundation(B222006060)
文摘A carrier tracking loop which can adjust the loop parameters adaptively is proposed for high dynamic application. Three modules, called the α-β-γT filter model, adaptive loop structure mod- el and adaptive loop bandwidth model respectively, are added in the presented tracking loop com- pared with the traditional carrier tracking loop based on the second-order frequency lock loop （FLL） assisting third-order phase lock loop （PLL） loop filter. And the optimization methods for the track- ing bandwidth and the carrier loop order are analyzed. The real-time estimation methods of the dy- namic parameters, the velocity, acceleration and jerk along the line of sight （LOS） between the sat- ellite and the receiver＇ s antenna, and the measurement parameters are discussed based on the pres- ented α-β-γ filter algorithm. A method is introduced to improve the filter＇ s dynamic response to meet high dynamic application by self-adjusted α-β-γ filter coefficient used in the tracking loop. The performance of three cases with different carrier tracking loop is compared by simulation.
文摘While different species in nature have safely solved the problem of navigation in a dynamic environment, this remains a challenging task for researchers around the world. The paper addresses the problem of autonomous navigation in an unknown dynamic environment for a single and a group of three wheeled omnidirectional mobile robots(TWOMRs). The robot has to track a dynamic target while avoiding dynamic obstacles and dynamic walls in an unknown and very dense environment. It adopts a behavior-based controller that consists of four behaviors: "target tracking", "obstacle avoidance", "dynamic wall following" and "avoid robots". The paper considers the problem of kinematic saturation. In addition, it introduces a strategy for predicting the velocity of dynamic obstacles based on two successive measurements of the ultrasonic sensors to calculate the velocity of the obstacle expressed in the sensor frame. Furthermore, the paper proposes a strategy to deal with dynamic walls even when they have U-like or V-like shapes. The approach can also deal with the formation control of a group of robots based on the leader-follower structure and the behavior-based control, where the robots have to get together and maintain a given formation while navigating toward the target, avoiding obstacles and walls in a dynamic environment. The effectiveness of the proposed approaches is demonstrated via simulation.
基金Project(51409061)supported by the National Natural Science Foundation of ChinaProject(2013M540271)supported by China Postdoctoral Science Foundation+1 种基金Project(LBH-Z13055)Supported by Heilongjiang Postdoctoral Financial Assistance,ChinaProject(HEUCFD1403)supported by Basic Research Foundation of Central Universities,China
文摘The trajectory tracking control problem for underactuated unmanned surface vehicles(USV) was addressed, and the control system took account of the uncertain influences induced by model perturbation, external disturbance, etc. By introducing the reference, trajectory was generated by a virtual USV, and the error equation of trajectory tracking for USV was obtained, which transformed the tracking problem of underactuated USV into the stabilization problem of the trajectory tracking error equation. A backstepping adaptive sliding mode controller was proposed based on backstepping technology and method of dynamic slide model control. By means of theoretical analysis, it is proved that the proposed controller ensures that the solutions of closed loop system have the ultimate boundedness property. Simulation results are presented to illustrate the effectiveness of the proposed controller.
基金supported in part by the National Key Reseanch and Development Program of China(2018AAA0101502,2018YFB1702300)in part by the National Natural Science Foundation of China(61722312,61533019,U1811463,61533017)in part by the Intel Collaborative Research Institute for Intelligent and Automated Connected Vehicles。
文摘This paper studies the problem of optimal parallel tracking control for continuous-time general nonlinear systems.Unlike existing optimal state feedback control,the control input of the optimal parallel control is introduced into the feedback system.However,due to the introduction of control input into the feedback system,the optimal state feedback control methods can not be applied directly.To address this problem,an augmented system and an augmented performance index function are proposed firstly.Thus,the general nonlinear system is transformed into an affine nonlinear system.The difference between the optimal parallel control and the optimal state feedback control is analyzed theoretically.It is proven that the optimal parallel control with the augmented performance index function can be seen as the suboptimal state feedback control with the traditional performance index function.Moreover,an adaptive dynamic programming(ADP)technique is utilized to implement the optimal parallel tracking control using a critic neural network(NN)to approximate the value function online.The stability analysis of the closed-loop system is performed using the Lyapunov theory,and the tracking error and NN weights errors are uniformly ultimately bounded(UUB).Also,the optimal parallel controller guarantees the continuity of the control input under the circumstance that there are finite jump discontinuities in the reference signals.Finally,the effectiveness of the developed optimal parallel control method is verified in two cases.
基金supported by the National Natural Science Foundation of China(51605251)Tsinghua University Initiative Scientific Research Program(2014Z05093).
文摘A new seam-tracking method based on dynamic trajectory planning for a mobile welding robot is proposed in order to improve the response lag of the mobile robot and the high frequency oscillation in seam-tracking.By using a front-placed laser-based vision sensor to dynamically extract the location of the weld seam in front of torch,the trend and direction of the weld line is roughly obtained.The robot system autonomously and dynamically performs trajectory planning based on the isometric approximation model.Arc sensor technology is applied to detect the offset during welding process in real time.The dynamic compensation of the weld path is done in combination with the control of the mobile robot and the executive body installed on it.Simulated and experimental results demonstrate that the method effectively increases the stability of welding speed and smoothness of the weld track,and hence the weld formation in curves and corners is improved.
基金Projects(90820302,60805027)supported by the National Natural Science Foundation of ChinaProject(200805330005)supported by the Research Fund for the Doctoral Program of Higher Education,ChinaProject(2009FJ4030)supported by Academician Foundation of Hunan Province,China
文摘Multi-target tracking(MTT) is a research hotspot of wireless sensor networks at present.A self-organized dynamic cluster task allocation scheme is used to implement collaborative task allocation for MTT in WSN and a special cluster member(CM) node selection method is put forward in the scheme.An energy efficiency model was proposed under consideration of both energy consumption and remaining energy balance in the network.A tracking accuracy model based on area-sum principle was also presented through analyzing the localization accuracy of triangulation.Then,the two models mentioned above were combined to establish dynamic cluster member selection model for MTT where a comprehensive performance index function was designed to guide the CM node selection.This selection was fulfilled using genetic algorithm.Simulation results show that this method keeps both energy efficiency and tracking quality in optimal state,and also indicate the validity of genetic algorithm in implementing CM node selection.
基金the National Natural Science Foundation of China(61933010)the Natural Science Basic Research Plan in Shaanxi Province of China(2023-JC-QN-0733).
文摘This paper tackles the formation-containment control problem of fixed-wing unmanned aerial vehicle(UAV)swarm with model uncertainties for dynamic target tracking in three-dimensional space in the faulty case of UAVs’actuator and sensor.The fixed-wing UAV swarm under consideration is organized as a“multi-leader-multi-follower”structure,in which only several leaders can obtain the dynamic target information while others only receive the neighbors’information through the communication network.To simultaneously realize the formation,containment,and dynamic target tracking,a two-layer control framework is adopted to decouple the problem into two subproblems:reference trajectory generation and trajectory tracking.In the upper layer,a distributed finite-time estimator(DFTE)is proposed to generate each UAV’s reference trajectory in accordance with the control objective.Subsequently,a distributed composite robust fault-tolerant trajectory tracking controller is developed in the lower layer,where a novel adaptive extended super-twisting(AESTW)algorithm with a finite-time extended state observer(FTESO)is involved in solving the robust trajectory tracking control problem under model uncertainties,actuator,and sensor faults.The proposed controller simultaneously guarantees rapidness and enhances the system’s robustness with fewer chattering effects.Finally,corresponding simulations are carried out to demonstrate the effectiveness and competitiveness of the proposed two-layer fault-tolerant cooperative control scheme.
基金supported by National Key R&D Program of China(2018YFA0702200)the National Natural Science Foundation of China(61627809, 62173080)Liaoning Revitalization Talents Program(XLYC1801005)
文摘In this study,the bipartite time-varying output formation tracking problem for heterogeneous multi-agent systems(MASs)with multiple leaders and switching commu-nication networks is considered.Note that the switching communication networks may be connected or disconnected.To address this problem,a novel reduced-dimensional observer-based fully distributed asynchronous dynamic edge-event-triggered output feedback control protocol is developed,and the Zeno behavior is ruled out.The theoretical analysis gives the admissible switching frequency and switching width under the proposed control protocol.Different from the existing works,the control protocol reduces the dimension of information to be transmitted between neighboring agents.Moreover,since an additional positive internal dynamic variable is introduced into the triggering functions,the control protocol can guarantee a larger inter-event time interval compared with previous results.Finally,a simulation example is given to verify the effectiveness and performance of the theoretical result.
基金This work was supported by the National Natural Science Foundation of China(No.61873248)the Hubei Provincial Natural Science Foundation of China(Nos.2017CFA030,2015CFA010)the 111 project(No.B17040).
文摘In this paper,a stochastic linear quadratic optimal tracking scheme is proposed for unknown linear discrete-time(DT)systems based on adaptive dynamic programming(ADP)algorithm.First,an augmented system composed of the original system and the command generator is constructed and then an augmented stochastic algebraic equation is derived based on the augmented system.Next,to obtain the optimal control strategy,the stochastic case is converted into the deterministic one by system transformation,and then an ADP algorithm is proposed with convergence analysis.For the purpose of realizing the ADP algorithm,three back propagation neural networks including model network,critic network and action network are devised to guarantee unknown system model,optimal value function and optimal control strategy,respectively.Finally,the obtained optimal control strategy is applied to the original stochastic system,and two simulations are provided to demonstrate the effectiveness of the proposed algorithm.
基金The National Key Research and Development Program of China(No.2017YFA0104302)the National Natural Science Foundation of China(No.51832001,61821002,81971750).
文摘A novel method combining visualization particle tracking with image-based dynamic light scattering was developed to achieve the in situ and real-time size measurement of nanobubbles(NBs).First,the in situ size distribution of NBs was visualized by dark-field microscopy.Then,real-time size during the preparation was measured using image-based dynamic light scattering,and the longitudinal size distribution of NBs in the sample cell was obtained in a steady state.Results show that this strategy can provide a detailed and accurate size of bubbles in the whole sample compared with the commercial ZetaSizer Nano equipment.Therefore,the developed method is a real-time and simple technology with excellent accuracy,providing new insights into the accurate measurement of the size distribution of NBs or nanoparticles in solution.
文摘With photoelectric tracking system as the research object,based on the theorem of moment of momentum and Euler dynamic equation,Nonlinear biaxial coupling dynamic model of tracking turntable is established.Effects of moment of inertia coupling,speed coupling and the dynamic coupling between tracking turntable shafts were studied,the analytical relation between them was given in theory.Verify the change trend of theoretical model.And it provides the theory reference and model base,for the future design of the high precision tracking controller And control parameter selection and optimization.In the end,specific measures are made for structure optimization.
