To achieve fast, smooth and accurate set point tracking in servo positioning systems, a parameterized design of nonlinear feedback controllers is presented, based on a so-called composite nonlinear feedback （CNF） co...To achieve fast, smooth and accurate set point tracking in servo positioning systems, a parameterized design of nonlinear feedback controllers is presented, based on a so-called composite nonlinear feedback （CNF） control technique. The controller designed here consists of a linear feedback part and a nonlinear part. The linear part is responsible for stability and fast response of the closed-loop system. The nonlinear part serves to increase the damping ratio of closed-loop poles as the controlled output approaches the target reference. The CNF control brings together the good points of both the small and the large damping ratio cases, by continuously scheduling the damping ratio of the dominant closed-loop poles and thus has the capability for superior transient performance, i.e. a fast output response with low overshoot. In the presence of constant disturbances, an integral action is included so as to remove the static bias. An explicitly parameterized controller is derived for servo positioning systems characterized by second-order model. Practical application in a micro hard disk drive servo system is then presented, together with some discussion of the rationale and characteristics of such design. Simulation and experimental results demonstrate the effectiveness of this control design methodology.展开更多
Commissioning of P/PI-cascade controlled servo axes with flexible load can be quite time consuming, if the step response based setup procedures are applied for the velocity controller as indicated by the automation sy...Commissioning of P/PI-cascade controlled servo axes with flexible load can be quite time consuming, if the step response based setup procedures are applied for the velocity controller as indicated by the automation systems manufacturers. Based on the drive frequency response, suitable rules of thumb with optimum velocity control damping performance are derived in this contribution that turned out to be very efficient in several dozen machine tool servo axis applications of different industrial partners in Switzerland and southern Germany. Anyway, single feedback loop velocity control sometimes provides insufficient damping of structural vibrations, especially for high dynamic machine tools or robots. The axis performance can be improved significantly by state space control extensions that are meanwhile available for commercial machine tool control systems. This contribution explains the state space control extension application with effective commissioning rules of thumb for typical machine tool axes as well as robot joint drives. The achievable benefit is elucidated by exemplary machine tool axes.展开更多
A novel non-smooth controller of the second order double integrator system with a bounded disturbance is proposed,which stability is proved and which disturbance rejection capability is analyzed by MATLAB simulation e...A novel non-smooth controller of the second order double integrator system with a bounded disturbance is proposed,which stability is proved and which disturbance rejection capability is analyzed by MATLAB simulation experiments. The novel non-smooth output feedback controller and tracking differentiator are applied to control the azimuth servo systemof the small floating satellite antenna. The MATLAB simulation and hardware in the loop simulation experiments are conducted. The experiment results validate that the non-smooth output feedback controller with stronger surge and sudden disturbance rejection capability can realize the stable azimuth servo control of the small floating antenna to ensure the communication between the target satellite and the antenna with high quality.展开更多
文摘To achieve fast, smooth and accurate set point tracking in servo positioning systems, a parameterized design of nonlinear feedback controllers is presented, based on a so-called composite nonlinear feedback （CNF） control technique. The controller designed here consists of a linear feedback part and a nonlinear part. The linear part is responsible for stability and fast response of the closed-loop system. The nonlinear part serves to increase the damping ratio of closed-loop poles as the controlled output approaches the target reference. The CNF control brings together the good points of both the small and the large damping ratio cases, by continuously scheduling the damping ratio of the dominant closed-loop poles and thus has the capability for superior transient performance, i.e. a fast output response with low overshoot. In the presence of constant disturbances, an integral action is included so as to remove the static bias. An explicitly parameterized controller is derived for servo positioning systems characterized by second-order model. Practical application in a micro hard disk drive servo system is then presented, together with some discussion of the rationale and characteristics of such design. Simulation and experimental results demonstrate the effectiveness of this control design methodology.
文摘Commissioning of P/PI-cascade controlled servo axes with flexible load can be quite time consuming, if the step response based setup procedures are applied for the velocity controller as indicated by the automation systems manufacturers. Based on the drive frequency response, suitable rules of thumb with optimum velocity control damping performance are derived in this contribution that turned out to be very efficient in several dozen machine tool servo axis applications of different industrial partners in Switzerland and southern Germany. Anyway, single feedback loop velocity control sometimes provides insufficient damping of structural vibrations, especially for high dynamic machine tools or robots. The axis performance can be improved significantly by state space control extensions that are meanwhile available for commercial machine tool control systems. This contribution explains the state space control extension application with effective commissioning rules of thumb for typical machine tool axes as well as robot joint drives. The achievable benefit is elucidated by exemplary machine tool axes.
基金Supported by Academic Innovation Project of Beijing(201106149)
文摘A novel non-smooth controller of the second order double integrator system with a bounded disturbance is proposed,which stability is proved and which disturbance rejection capability is analyzed by MATLAB simulation experiments. The novel non-smooth output feedback controller and tracking differentiator are applied to control the azimuth servo systemof the small floating satellite antenna. The MATLAB simulation and hardware in the loop simulation experiments are conducted. The experiment results validate that the non-smooth output feedback controller with stronger surge and sudden disturbance rejection capability can realize the stable azimuth servo control of the small floating antenna to ensure the communication between the target satellite and the antenna with high quality.
