Along with the proliferating research interest in semantic communication(Sem Com),joint source channel coding(JSCC)has dominated the attention due to the widely assumed existence in efficiently delivering information ...Along with the proliferating research interest in semantic communication(Sem Com),joint source channel coding(JSCC)has dominated the attention due to the widely assumed existence in efficiently delivering information semantics.Nevertheless,this paper challenges the conventional JSCC paradigm and advocates for adopting separate source channel coding(SSCC)to enjoy a more underlying degree of freedom for optimization.We demonstrate that SSCC,after leveraging the strengths of the Large Language Model(LLM)for source coding and Error Correction Code Transformer(ECCT)complemented for channel coding,offers superior performance over JSCC.Our proposed framework also effectively highlights the compatibility challenges between Sem Com approaches and digital communication systems,particularly concerning the resource costs associated with the transmission of high-precision floating point numbers.Through comprehensive evaluations,we establish that assisted by LLM-based compression and ECCT-enhanced error correction,SSCC remains a viable and effective solution for modern communication systems.In other words,separate source channel coding is still what we need.展开更多
To mitigate the sand burial of highways in sandy regions,a separated subgrade design was widely adopted in the embankments of high-grade highways,but the problem of sand deposition on subgrade slopes and pavements sti...To mitigate the sand burial of highways in sandy regions,a separated subgrade design was widely adopted in the embankments of high-grade highways,but the problem of sand deposition on subgrade slopes and pavements still happens frequently.Based on the theory of wind-sand two-phase flow,this paper constructed a three-dimensional model of the separated subgrade,the wind-sand flow transport law around the subgrade with varying median strip widths and concave depths was simulated by Fluent software.After comparison and analysis of seven subgrade models,the flow field distribution,wind speed horizontal variation,and erosion-deposition characteristics were investigated.The findings are as follows:(1)The width of the median strip in the separated subgrade had significant influences on the wind-sand flow.The smooth passage of wind-sand flow over the road surface was facilitated with the increase of the median strip width.However,sand deposition in the median strip happened.It can lead to secondary sand damage of downwind subgrade and increase the work load of road sand removal for subsequent maintenance.(2)The obstruction to airflow and sand accumulation was aggravated with greater concave depth of the median strip.Therefore,it is advisable to minimize the concave depth of the median strip in case of more sand damage.(3)A median strip width exceeding 12 m(possibly without guardrails)for an integral embankment without enough road land is recommended.Conversely,median strip width of over 40 m for separate subgrade with unrestricted land is suggested.(4)In the case of sand deposition in the existing separated subgrade,the median strip can be filled by sand deposition or other materials,then was covered with gravel to form a flat ground like Gobi smooth surface,which can let the wind-blown sand flow pass through the subgrade section without sand deposition.展开更多
To address the challenges associated with existing separated zone oil production technologies,such as incompatibility with pump inspection operations,short effective working life,and poor communication reliability,an ...To address the challenges associated with existing separated zone oil production technologies,such as incompatibility with pump inspection operations,short effective working life,and poor communication reliability,an innovative electromagnetic coupling intelligent zonal oil production technology has been proposed.The core and accessory tools have been developed and applied in field tests.This technology employs a pipe string structure incorporation a release sub,which separates the production and allocation pipe strings.When the two strings are docked downhole,electromagnetic coupling enables close-range wireless transmission of electrical power and signals between the strings,powering multiple downhole intelligent production allocators(IPAs)and enabling two-way communication.Core tools adapted to the complex working conditions downhole were developed,including downhole electricity&signal transmission equipment based on electromagnetic coupling(EST),IPAs,and ground communication controllers(GCCs).Accessory tools,including large-diameter release sub anchor and cable-crossing packers,have also been technically finalized.Field tests conducted on ten wells in Daqing Oilfield demonstrated that the downhole docking of the two strings was convenient and reliable,and the EST worked stably.Real-time monitoring of flow rate,pressure and temperature in separate layers and regulation of zonal fluid production were also achieved.This technology has enhanced reservoir understanding and achieved practical production results of increased oil output with reduced water cut.展开更多
Herein,a new type of two-dimensional(2D)/2D Ti_(3)C_(2)/TiO_(2) heterojunction was developed for efficient photocatalytic nitrogen reduction reaction(NRR),in which TiO_(2) nanosheets(TiO_(2) Ns)were designed as the ma...Herein,a new type of two-dimensional(2D)/2D Ti_(3)C_(2)/TiO_(2) heterojunction was developed for efficient photocatalytic nitrogen reduction reaction(NRR),in which TiO_(2) nanosheets(TiO_(2) Ns)were designed as the main catalyst,while Ti_(3)C_(2) MXene served as the co-catalyst.Experimental and theoretical results revealed that Ti_(3)C_(2) MXene introduced electron-rich unsaturated Ti sites,serving as highly active sites for both the adsorption and activation of N_(2) on the Ti_(3)C_(2)/TiO_(2) heterojunction.Furthermore,the 2D/2D Ti_(3)C_(2)/TiO_(2) heterostructure greatly promoted the directional separation and transfer of charge carriers,facilitated by the internal electric field.This structural feature enabled the spatial separation of the N_(2) reduction and H2 O oxidation half-reactions on the distinct surfaces of Ti_(3)C_(2)(001)and TiO_(2)(001),con-sequently reducing the reaction energy barrier for each respective process.The synergistic effects arising from the interface and surface interactions within the heterojunction conspicuously improved the photo-catalytic NRR activity.As a result,the optimized Ti_(3)C_(2)/TiO_(2) heterojunction exhibited a high NH_(3) produc-tion rate of 24.4μmol g−1 h−1 in the absence of sacrificial agents,representing a remarkable 12.8-fold increase compared to individual TiO_(2) Ns.This work provides new insights into rational design of high-performance heterogeneous photocatalysts and offers a deeper understanding of the mechanism under-lying surface active sites in the photocatalytic NRR process.展开更多
The development of degradable and chemically recyclable polymers is a promising strategy to address pressing environmental and resource-related challenges.Despite significant progress,there is a need for continuous de...The development of degradable and chemically recyclable polymers is a promising strategy to address pressing environmental and resource-related challenges.Despite significant progress,there is a need for continuous development of such recyclable polymers.Herein,PPDOPLLA-PU copolymers were synthesized from poly(p-dioxanone)-diol(PPDO-diol)and poly(L-lactide)-diol(PLLA-diol)by chain extension reaction.The chemical structures and microphase structures of PPDO-PLLA-PU were characterized,and their crystalline properties,mechanical properties,and degradation behaviors were further investigated.Significantly,the distribution of PLLA phase in the copolymer matrix showed a rod-like microstructure with a slight orientation,despite the thermodynamic incompatibility of PPDO and PLLA segments.Moreover,on the basis of this microphase separation,PPDO spherulites can crystallize using the interface of the two phases as nucleation sites.Accordingly,the combined effect of above two contributes to the enhanced mechanical properties.In addition,PPDO-PLLA-PU copolymers have good processability and recyclability,making them valuable for a wide range of applications.展开更多
In this paper we shall offer a separation axiom for frames inspired by the Hausdorff separation axiom for topological spaces. We call it separated condition. This is a condition on topology OX equivalent to the ...In this paper we shall offer a separation axiom for frames inspired by the Hausdorff separation axiom for topological spaces. We call it separated condition. This is a condition on topology OX equivalent to the T O space X being Hausdorff. The class of separated frames includes that of strong Hausdorff frames and that of S frames. We shall show that the class of separated frames is a class closed under the formation of coproducts and subspaces, and the space Fil( L ) is Hausdorff for any separated frame L . Therefore there is a contravariant adjunction between the category TOP 2 of Hausdorff topological spaces and the category FRAM 2 of separated frames.展开更多
In seismic exploration, it is common practice to separate the P-wavefield from the S-wavefield by the elastic wavefield decomposition technique, for imaging purposes. However, it is sometimes difficult to achieve this...In seismic exploration, it is common practice to separate the P-wavefield from the S-wavefield by the elastic wavefield decomposition technique, for imaging purposes. However, it is sometimes difficult to achieve this, especially when the velocity field is complex. A useful approach in multi-component analysis and modeling is to directly solve the elastic wave equations for the pure P- or S-wavefields, referred as the separate elastic wave equa- tions. In this study, we compare two kinds of such wave equations： the first-order （velocity-stress） and the second- order （displacement-stress） separate elastic wave equa- tions, with the first-order （velocity-stress） and the second- order （displacement-stress） full （or mixed） elastic wave equations using a high-order staggered grid finite-differ- ence method. Comparisons are given of wavefield snap- shots, common-source gather seismic sections, and individual synthetic seismogram. The simulation tests show that equivalent results can be obtained, regardless of whether the first-order or second-order separate elastic wave equations are used for obtaining the pure P- or S-wavefield. The stacked pure P- and S-wavefields are equal to the mixed wave fields calculated using the corre- sponding first-order or second-order full elastic wave equations. These mixed equations are computationallyslightly less expensive than solving the separate equations. The attraction of the separate equations is that they achieve separated P- and S-wavefields which can be used to test the efficacy of wave decomposition procedures in multi-com- ponent processing. The second-order separate elastic wave equations are a good choice because they offer information on the pure P-wave or S-wave displacements.展开更多
Suppression of photogenerated charge recombination is crucial for efficient photocatalytic hydrogen production.Homojunctions have garnered more attention than heterojunctions due to their superior crystal binding and ...Suppression of photogenerated charge recombination is crucial for efficient photocatalytic hydrogen production.Homojunctions have garnered more attention than heterojunctions due to their superior crystal binding and band structure matching.However,most homojunctions suffer from redox interference caused by continuous oxidizing and reducing phases that impede the ability to improve photocatalytic activity.Consequently,the preparation of homojunction photocatalysts with completely spatial separation of both in charge and redox phases remains challenging.Here,the preparation of a two-dimensional(2D)homojunction CeO_(2) with a back-to-back geometry and fully separated oxidizing and reducing phases is reported.The prepared CeO_(2) is composed of nanosheets with twocontrasting smooth and rough surfaces.Experimental and theoretical results indicate that the rough surface contains more highly reducing CeO_(2){220}and strongly visiblelight-absorbing CeO_(2){200}facets than the smooth surface.The 2D homojunction CeO_(2) produces three-times more hydrogen than normal CeO_(2) nanosheets,and even more than that of CeO_(2) nanosheets loaded with gold nanoparticles.This work presents a new homojunction photocatalyst model with completely spatial separation of both in charge and redox phases that is expected to inspire further research into homojunction photocatalysts.展开更多
Numerical studies of the flow past a circular cylinder at Reynolds number 1.4 × 105 and NACA0021 airfoil at the angle of attack 60° have been carried out by scale-adaptive simulation （SAS） and detached edd...Numerical studies of the flow past a circular cylinder at Reynolds number 1.4 × 105 and NACA0021 airfoil at the angle of attack 60° have been carried out by scale-adaptive simulation （SAS） and detached eddy simu- lation （DES）, in comparison with the existing experimental data. The new version of the model developed by Egorov and Menter is assessed, and advantages and disadvantages of the SAS simulation are analyzed in detail to provide guidance for industrial application in the future. Moreover, the mechanism of the scale-adaptive characteristics in separated regions is discussed, which is obscure in previous analyses. It is con- cluded that： the mean flow properties satisfactorily agree with the experimental results for the SAS simulation, although the prediction of the second order turbulent statistics in the near wake region is just reasonable. The SAS model can produce a larger magnitude of the turbulent kinetic energy in the recir- culation bubble, and, consequently, a smaller recirculation region and a more rapid recovery of the mean velocity out- side the recirculation region than the DES approach with the same grid resolution. The vortex shedding is slightly less irregular with the SAS model than with the DES approach, probably due to the higher dissipation of the SAS simulation under the condition of the coarse mesh.展开更多
The process through which a laminar flow undergoes transition to turbulence is of great fundamental and practical interest. Such a process is hugely complex as there are many diverse routes for a laminar flow to becom...The process through which a laminar flow undergoes transition to turbulence is of great fundamental and practical interest. Such a process is hugely complex as there are many diverse routes for a laminar flow to become turbulent flow. The transition process is usually initiated by flow instabilities—a primary instability stage followed by a secondary instability stage. This forms a rational framework for the early stage of a transition process and it is crucially important to understand the physics of instabilities leading to turbulence. This article reviews the results of studies on secondary instability of separated shear layers in separation bubbles and summaries the current status of our understanding in this area.展开更多
Separate type heat pipe heat exchangers are often used for large-scale heat exchanging. The arrangement of such a heat exchanger conveniently allows heat input to and output from the heat exchanger at remote locations...Separate type heat pipe heat exchangers are often used for large-scale heat exchanging. The arrangement of such a heat exchanger conveniently allows heat input to and output from the heat exchanger at remote locations. The traditional method of designing an ordinary HPHE (heat pipe heat exchanger) is commonly applied in the separate type exchanger design, but the calculations have to be carried out separately, which makes it very complicated. In this work, the ε-NTU (effectiveness-Number of Transfer Units) method was applied for optimization analysis of single- or multi-level separate type heat pipe heat exchangers. An optimizing formula for single-level separate type heat pipe heat exchangers was obtained. The optimizing principles of effec- tiveness-NTU and heat transfer rate by the equal distribution method for multi-level separate type heat pipe heat exchanger are presented. The design of separate type heat pipe heat exchangers by the optimizing method is more convenient and faster than by the traditional method.展开更多
This article outlines the development of downhole monitoring and data transmission technology for separated zone water injection in China.According to the development stages,the principles,operation processes,adaptabi...This article outlines the development of downhole monitoring and data transmission technology for separated zone water injection in China.According to the development stages,the principles,operation processes,adaptability and application status of traditional downhole data acquisition method,cable communications and testing technology,cable-controlled downhole parameter real-time monitoring communication method and downhole wireless communication technology are introduced in detail.Problems and challenges of existing technologies in downhole monitoring and data transmission technology are pointed out.According to the production requirement,the future development direction of the downhole monitoring and data transmission technology for separated zone water injection is proposed.For the large number of wells adopting cable measuring and adjustment technology,the key is to realize the digitalization of downhole plug.For the key monitoring wells,cable-controlled communication technology needs to be improved,and downhole monitoring and data transmission technology based on composite coiled tubing needs to be developed to make the operation more convenient and reliable.For large-scale application in oil fields,downhole wireless communication technology should be developed to realize automation of measurement and adjustment.In line with ground mobile communication network,a digital communication network covering the control center,water distribution station and oil reservoir should be built quickly to provide technical support for the digitization of reservoir development.展开更多
By introducing a more general auxiliary ordinary differential equation （ODE）, a modified variable separated ODE method is developed for solving the mKdV-sinh-Gordon equation. As a result, many explicit and exact sol...By introducing a more general auxiliary ordinary differential equation （ODE）, a modified variable separated ODE method is developed for solving the mKdV-sinh-Gordon equation. As a result, many explicit and exact solutions including some new formal solutions are successfully picked up for the mKdV-sinh-Gordon equation by this approach.展开更多
The state estimation of a maneuvering target,of which the trajectory shape is independent on dynamic characteristics,is studied.The conventional motion models in Cartesian coordinates imply that the trajectory of a ta...The state estimation of a maneuvering target,of which the trajectory shape is independent on dynamic characteristics,is studied.The conventional motion models in Cartesian coordinates imply that the trajectory of a target is completely determined by its dynamic characteristics.However,this is not true in the applications of road-target,sea-route-target or flight route-target tracking,where target trajectory shape is uncoupled with target velocity properties.In this paper,a new estimation algorithm based on separate modeling of target trajectory shape and dynamic characteristics is proposed.The trajectory of a target over a sliding window is described by a linear function of the arc length.To determine the unknown target trajectory,an augmented system is derived by denoting the unknown coefficients of the function as states in mileage coordinates.At every estimation cycle except the first one,the interaction(mixing)stage of the proposed algorithm starts from the latest estimated base state and a recalculated parameter vector,which is determined by the least squares(LS).Numerical experiments are conducted to assess the performance of the proposed algorithm.Simulation results show that the proposed algorithm can achieve better performance than the conventional coupled model-based algorithms in the presence of target maneuvers.展开更多
Acryloyl terminated Poly (ethyleneoxide)macromonomers (PEO-A) with different PEO chain lengths have been prepared by deactivation of PEO alkoxide with acryloyl chloride. A new kind of amphiphilic polystyrene-g-poly (e...Acryloyl terminated Poly (ethyleneoxide)macromonomers (PEO-A) with different PEO chain lengths have been prepared by deactivation of PEO alkoxide with acryloyl chloride. A new kind of amphiphilic polystyrene-g-poly (ethylene oxide)graft copolymer containing both microphase separated and PEO side chain structures has been synthesized from radical copolymerization of PEO-A macromonomer with styrene. After careful purification by a newly-developed method called 'selective dissolution', the well-defined structure of the purified copolymers was confirmed by IR, ~1H-NMR and GPC. Various experimental parameters controlling the copolymerization were studied in detail. The results indicated that the feed ratio of styrene to macromonomer(S/M) was the most important determining factor for the composition of the copolymers. A detailed 'comb- model' was proposed to describe the molecular structure of the graft copolymers. Finally, this amphiphilic graft copolymers may readily form microphase separated structures as clearly indicated by transmission electron microscopy.展开更多
Accurate prediction of unsteady separated turbulent flows remains one of the toughest tasks and a practi cal challenge for turbulence modeling. In this paper, a 2D flow past a circular cylinder at Reynolds number 3,90...Accurate prediction of unsteady separated turbulent flows remains one of the toughest tasks and a practi cal challenge for turbulence modeling. In this paper, a 2D flow past a circular cylinder at Reynolds number 3,900 is numerically investigated by using the technique of unsteady RANS （URANS）. Some typical linear and nonlinear eddy viscosity turbulence models （LEVM and NLEVM） and a quadratic explicit algebraic stress model （EASM） are evaluated. Numerical results have shown that a high-performance cubic NLEVM, such as CLS, are superior to the others in simulating turbulent separated flows with unsteady vortex shedding.展开更多
The effect of Fructus Mume formula and its separated prescription extract on insulin resis- tance in type 2 diabetic rats was investigated. The rat model of type 2 diabetes was established by feed- ing on a high-fat d...The effect of Fructus Mume formula and its separated prescription extract on insulin resis- tance in type 2 diabetic rats was investigated. The rat model of type 2 diabetes was established by feed- ing on a high-fat diet for 8 weeks and by subsequently intravenous injection of small doses of strepto- zotocin. Rats in treatment groups, including the Fructus Mume formula treatment group （FM）, the cold property herbs of Fructus Mume formula treatment group （CFM）, the warm property herbs of Fructus Mume formula treatment group （WFM）, were administrated with Fructus Mume formula and its sepa- rated prescription extract by gavage, while the rats in diabetic model group （DM） and metformin group （MET） were given by gavage with normal saline and metformin correspondingly. The body weight be- fore and after treatment was measured, and the oral glucose tolerance test （OGTT） and the insulin re- lease test （IRT） were performed. The homeostasis model assessment-insulin resistance index （HOMA-IR） was calculated. The protein and mRNA expression levels of Insr, β-arrestin-2, Its-1 and Glut-4 in the liver, skeletal muscle and fat tissues were detected by using Western blotting and RT-PCR respectively. The results demonstrated that, as compared with DM group, OGTT, IRT （0 h, 1 h） levels and HOMR-IR in treatment groups were all reduced, meanwhile their protein and mRNA expression levels of Insr, Irs-1 and Glut-4 in the liver, skeletal muscle and fat tissues were obviously increased, and their protein and mRNA expression levels of β-arrestin-2 in the liver and skeletal muscle tissues were also markedly increased. It was suggested that the Fructus Mume formula and its separated prescription extracts could effectively improve insulin resistance in type 2 diabetic rats, which might be related to the up-regulated expression of Insr, Irs-1 and Glut-4 in the liver, skeletal muscle and fat tissues, and β-arrestin-2 in the liver and skeletal muscle tissues.展开更多
基金supported in part by the National Key Research and Development Program of China under Grant No.2024YFE0200600the Zhejiang Provincial Natural Science Foundation of China under Grant No.LR23F010005the Huawei Cooperation Project under Grant No.TC20240829036。
文摘Along with the proliferating research interest in semantic communication(Sem Com),joint source channel coding(JSCC)has dominated the attention due to the widely assumed existence in efficiently delivering information semantics.Nevertheless,this paper challenges the conventional JSCC paradigm and advocates for adopting separate source channel coding(SSCC)to enjoy a more underlying degree of freedom for optimization.We demonstrate that SSCC,after leveraging the strengths of the Large Language Model(LLM)for source coding and Error Correction Code Transformer(ECCT)complemented for channel coding,offers superior performance over JSCC.Our proposed framework also effectively highlights the compatibility challenges between Sem Com approaches and digital communication systems,particularly concerning the resource costs associated with the transmission of high-precision floating point numbers.Through comprehensive evaluations,we establish that assisted by LLM-based compression and ECCT-enhanced error correction,SSCC remains a viable and effective solution for modern communication systems.In other words,separate source channel coding is still what we need.
基金supported by the Third Xinjiang Scientific Expedition and Research Program-Investigation and Risk Assessment of Drought and Aeolian Disasters in Tarim River Basin(No.2021xjkk0300)the National Natural Science Foundation of China(No.62466056)the subject of'the technical scheme and application demonstration of sand disaster prevention and control of Xinjiang expressway to engineering practice,Xinjiang Transportation Investment(Group)Co.,Ltd.(No.XJJTZKX-FWCG-202401-0043).
文摘To mitigate the sand burial of highways in sandy regions,a separated subgrade design was widely adopted in the embankments of high-grade highways,but the problem of sand deposition on subgrade slopes and pavements still happens frequently.Based on the theory of wind-sand two-phase flow,this paper constructed a three-dimensional model of the separated subgrade,the wind-sand flow transport law around the subgrade with varying median strip widths and concave depths was simulated by Fluent software.After comparison and analysis of seven subgrade models,the flow field distribution,wind speed horizontal variation,and erosion-deposition characteristics were investigated.The findings are as follows:(1)The width of the median strip in the separated subgrade had significant influences on the wind-sand flow.The smooth passage of wind-sand flow over the road surface was facilitated with the increase of the median strip width.However,sand deposition in the median strip happened.It can lead to secondary sand damage of downwind subgrade and increase the work load of road sand removal for subsequent maintenance.(2)The obstruction to airflow and sand accumulation was aggravated with greater concave depth of the median strip.Therefore,it is advisable to minimize the concave depth of the median strip in case of more sand damage.(3)A median strip width exceeding 12 m(possibly without guardrails)for an integral embankment without enough road land is recommended.Conversely,median strip width of over 40 m for separate subgrade with unrestricted land is suggested.(4)In the case of sand deposition in the existing separated subgrade,the median strip can be filled by sand deposition or other materials,then was covered with gravel to form a flat ground like Gobi smooth surface,which can let the wind-blown sand flow pass through the subgrade section without sand deposition.
基金Supported by the National Natural Science Foundation of China(52374067)PetroChina Scientific Research and Technology Development Project(2021ZG12)PetroChina Technology Project(2023ZZ09).
文摘To address the challenges associated with existing separated zone oil production technologies,such as incompatibility with pump inspection operations,short effective working life,and poor communication reliability,an innovative electromagnetic coupling intelligent zonal oil production technology has been proposed.The core and accessory tools have been developed and applied in field tests.This technology employs a pipe string structure incorporation a release sub,which separates the production and allocation pipe strings.When the two strings are docked downhole,electromagnetic coupling enables close-range wireless transmission of electrical power and signals between the strings,powering multiple downhole intelligent production allocators(IPAs)and enabling two-way communication.Core tools adapted to the complex working conditions downhole were developed,including downhole electricity&signal transmission equipment based on electromagnetic coupling(EST),IPAs,and ground communication controllers(GCCs).Accessory tools,including large-diameter release sub anchor and cable-crossing packers,have also been technically finalized.Field tests conducted on ten wells in Daqing Oilfield demonstrated that the downhole docking of the two strings was convenient and reliable,and the EST worked stably.Real-time monitoring of flow rate,pressure and temperature in separate layers and regulation of zonal fluid production were also achieved.This technology has enhanced reservoir understanding and achieved practical production results of increased oil output with reduced water cut.
基金supported by the National Natural Science Foundation of China(No.21773089)the Henan Center for Outstanding Overseas Scientist(No.GZS2024004).
文摘Herein,a new type of two-dimensional(2D)/2D Ti_(3)C_(2)/TiO_(2) heterojunction was developed for efficient photocatalytic nitrogen reduction reaction(NRR),in which TiO_(2) nanosheets(TiO_(2) Ns)were designed as the main catalyst,while Ti_(3)C_(2) MXene served as the co-catalyst.Experimental and theoretical results revealed that Ti_(3)C_(2) MXene introduced electron-rich unsaturated Ti sites,serving as highly active sites for both the adsorption and activation of N_(2) on the Ti_(3)C_(2)/TiO_(2) heterojunction.Furthermore,the 2D/2D Ti_(3)C_(2)/TiO_(2) heterostructure greatly promoted the directional separation and transfer of charge carriers,facilitated by the internal electric field.This structural feature enabled the spatial separation of the N_(2) reduction and H2 O oxidation half-reactions on the distinct surfaces of Ti_(3)C_(2)(001)and TiO_(2)(001),con-sequently reducing the reaction energy barrier for each respective process.The synergistic effects arising from the interface and surface interactions within the heterojunction conspicuously improved the photo-catalytic NRR activity.As a result,the optimized Ti_(3)C_(2)/TiO_(2) heterojunction exhibited a high NH_(3) produc-tion rate of 24.4μmol g−1 h−1 in the absence of sacrificial agents,representing a remarkable 12.8-fold increase compared to individual TiO_(2) Ns.This work provides new insights into rational design of high-performance heterogeneous photocatalysts and offers a deeper understanding of the mechanism under-lying surface active sites in the photocatalytic NRR process.
基金financially supported by the National Key R&D Program of China(No.2021YFB3801901)the National Natural Science Foundation of China(Nos.52403138 and U19A2095)+1 种基金Institutional Research Fund from Sichuan University(No.2020SCUNL205)Fundamental Research Funds for the Central Universities,and 111 Project(No.B20001)。
文摘The development of degradable and chemically recyclable polymers is a promising strategy to address pressing environmental and resource-related challenges.Despite significant progress,there is a need for continuous development of such recyclable polymers.Herein,PPDOPLLA-PU copolymers were synthesized from poly(p-dioxanone)-diol(PPDO-diol)and poly(L-lactide)-diol(PLLA-diol)by chain extension reaction.The chemical structures and microphase structures of PPDO-PLLA-PU were characterized,and their crystalline properties,mechanical properties,and degradation behaviors were further investigated.Significantly,the distribution of PLLA phase in the copolymer matrix showed a rod-like microstructure with a slight orientation,despite the thermodynamic incompatibility of PPDO and PLLA segments.Moreover,on the basis of this microphase separation,PPDO spherulites can crystallize using the interface of the two phases as nucleation sites.Accordingly,the combined effect of above two contributes to the enhanced mechanical properties.In addition,PPDO-PLLA-PU copolymers have good processability and recyclability,making them valuable for a wide range of applications.
文摘In this paper we shall offer a separation axiom for frames inspired by the Hausdorff separation axiom for topological spaces. We call it separated condition. This is a condition on topology OX equivalent to the T O space X being Hausdorff. The class of separated frames includes that of strong Hausdorff frames and that of S frames. We shall show that the class of separated frames is a class closed under the formation of coproducts and subspaces, and the space Fil( L ) is Hausdorff for any separated frame L . Therefore there is a contravariant adjunction between the category TOP 2 of Hausdorff topological spaces and the category FRAM 2 of separated frames.
基金partially supported by China National Major Science and Technology Project (Subproject No:2011ZX05024-001-03)
文摘In seismic exploration, it is common practice to separate the P-wavefield from the S-wavefield by the elastic wavefield decomposition technique, for imaging purposes. However, it is sometimes difficult to achieve this, especially when the velocity field is complex. A useful approach in multi-component analysis and modeling is to directly solve the elastic wave equations for the pure P- or S-wavefields, referred as the separate elastic wave equa- tions. In this study, we compare two kinds of such wave equations： the first-order （velocity-stress） and the second- order （displacement-stress） separate elastic wave equa- tions, with the first-order （velocity-stress） and the second- order （displacement-stress） full （or mixed） elastic wave equations using a high-order staggered grid finite-differ- ence method. Comparisons are given of wavefield snap- shots, common-source gather seismic sections, and individual synthetic seismogram. The simulation tests show that equivalent results can be obtained, regardless of whether the first-order or second-order separate elastic wave equations are used for obtaining the pure P- or S-wavefield. The stacked pure P- and S-wavefields are equal to the mixed wave fields calculated using the corre- sponding first-order or second-order full elastic wave equations. These mixed equations are computationallyslightly less expensive than solving the separate equations. The attraction of the separate equations is that they achieve separated P- and S-wavefields which can be used to test the efficacy of wave decomposition procedures in multi-com- ponent processing. The second-order separate elastic wave equations are a good choice because they offer information on the pure P-wave or S-wave displacements.
基金financially supported by the National Natural Science Foundation of China (Nos.22205084 and21805191)the Start-Up Funding of Jiangsu University of Science and Technology (No.1112932203)+2 种基金Guangdong Basic and Applied Basic Research Foundation (No.2020A1515010982)Shenzhen Stable Support Project (No.20200812122947002)Shenzhen Peacock Plan (No.20210802524B)。
文摘Suppression of photogenerated charge recombination is crucial for efficient photocatalytic hydrogen production.Homojunctions have garnered more attention than heterojunctions due to their superior crystal binding and band structure matching.However,most homojunctions suffer from redox interference caused by continuous oxidizing and reducing phases that impede the ability to improve photocatalytic activity.Consequently,the preparation of homojunction photocatalysts with completely spatial separation of both in charge and redox phases remains challenging.Here,the preparation of a two-dimensional(2D)homojunction CeO_(2) with a back-to-back geometry and fully separated oxidizing and reducing phases is reported.The prepared CeO_(2) is composed of nanosheets with twocontrasting smooth and rough surfaces.Experimental and theoretical results indicate that the rough surface contains more highly reducing CeO_(2){220}and strongly visiblelight-absorbing CeO_(2){200}facets than the smooth surface.The 2D homojunction CeO_(2) produces three-times more hydrogen than normal CeO_(2) nanosheets,and even more than that of CeO_(2) nanosheets loaded with gold nanoparticles.This work presents a new homojunction photocatalyst model with completely spatial separation of both in charge and redox phases that is expected to inspire further research into homojunction photocatalysts.
基金the National Basic Research Program of China ("973" Project) (Grant No. 2009CB724104)
文摘Numerical studies of the flow past a circular cylinder at Reynolds number 1.4 × 105 and NACA0021 airfoil at the angle of attack 60° have been carried out by scale-adaptive simulation （SAS） and detached eddy simu- lation （DES）, in comparison with the existing experimental data. The new version of the model developed by Egorov and Menter is assessed, and advantages and disadvantages of the SAS simulation are analyzed in detail to provide guidance for industrial application in the future. Moreover, the mechanism of the scale-adaptive characteristics in separated regions is discussed, which is obscure in previous analyses. It is con- cluded that： the mean flow properties satisfactorily agree with the experimental results for the SAS simulation, although the prediction of the second order turbulent statistics in the near wake region is just reasonable. The SAS model can produce a larger magnitude of the turbulent kinetic energy in the recir- culation bubble, and, consequently, a smaller recirculation region and a more rapid recovery of the mean velocity out- side the recirculation region than the DES approach with the same grid resolution. The vortex shedding is slightly less irregular with the SAS model than with the DES approach, probably due to the higher dissipation of the SAS simulation under the condition of the coarse mesh.
文摘The process through which a laminar flow undergoes transition to turbulence is of great fundamental and practical interest. Such a process is hugely complex as there are many diverse routes for a laminar flow to become turbulent flow. The transition process is usually initiated by flow instabilities—a primary instability stage followed by a secondary instability stage. This forms a rational framework for the early stage of a transition process and it is crucially important to understand the physics of instabilities leading to turbulence. This article reviews the results of studies on secondary instability of separated shear layers in separation bubbles and summaries the current status of our understanding in this area.
文摘Separate type heat pipe heat exchangers are often used for large-scale heat exchanging. The arrangement of such a heat exchanger conveniently allows heat input to and output from the heat exchanger at remote locations. The traditional method of designing an ordinary HPHE (heat pipe heat exchanger) is commonly applied in the separate type exchanger design, but the calculations have to be carried out separately, which makes it very complicated. In this work, the ε-NTU (effectiveness-Number of Transfer Units) method was applied for optimization analysis of single- or multi-level separate type heat pipe heat exchangers. An optimizing formula for single-level separate type heat pipe heat exchangers was obtained. The optimizing principles of effec- tiveness-NTU and heat transfer rate by the equal distribution method for multi-level separate type heat pipe heat exchanger are presented. The design of separate type heat pipe heat exchangers by the optimizing method is more convenient and faster than by the traditional method.
基金Supported by the National Natural Science Foundation Science Center Project/Basic Science Center Project(72088101)PetroChina Scientific Research and Technology Development Project(2020B-4119,2021ZG12).
文摘This article outlines the development of downhole monitoring and data transmission technology for separated zone water injection in China.According to the development stages,the principles,operation processes,adaptability and application status of traditional downhole data acquisition method,cable communications and testing technology,cable-controlled downhole parameter real-time monitoring communication method and downhole wireless communication technology are introduced in detail.Problems and challenges of existing technologies in downhole monitoring and data transmission technology are pointed out.According to the production requirement,the future development direction of the downhole monitoring and data transmission technology for separated zone water injection is proposed.For the large number of wells adopting cable measuring and adjustment technology,the key is to realize the digitalization of downhole plug.For the key monitoring wells,cable-controlled communication technology needs to be improved,and downhole monitoring and data transmission technology based on composite coiled tubing needs to be developed to make the operation more convenient and reliable.For large-scale application in oil fields,downhole wireless communication technology should be developed to realize automation of measurement and adjustment.In line with ground mobile communication network,a digital communication network covering the control center,water distribution station and oil reservoir should be built quickly to provide technical support for the digitization of reservoir development.
基金Project supported by the National Natural Science Foundation of China (Grant No 10672053)
文摘By introducing a more general auxiliary ordinary differential equation （ODE）, a modified variable separated ODE method is developed for solving the mKdV-sinh-Gordon equation. As a result, many explicit and exact solutions including some new formal solutions are successfully picked up for the mKdV-sinh-Gordon equation by this approach.
基金supported by the National Natural Science Foundation of China(61671181).
文摘The state estimation of a maneuvering target,of which the trajectory shape is independent on dynamic characteristics,is studied.The conventional motion models in Cartesian coordinates imply that the trajectory of a target is completely determined by its dynamic characteristics.However,this is not true in the applications of road-target,sea-route-target or flight route-target tracking,where target trajectory shape is uncoupled with target velocity properties.In this paper,a new estimation algorithm based on separate modeling of target trajectory shape and dynamic characteristics is proposed.The trajectory of a target over a sliding window is described by a linear function of the arc length.To determine the unknown target trajectory,an augmented system is derived by denoting the unknown coefficients of the function as states in mileage coordinates.At every estimation cycle except the first one,the interaction(mixing)stage of the proposed algorithm starts from the latest estimated base state and a recalculated parameter vector,which is determined by the least squares(LS).Numerical experiments are conducted to assess the performance of the proposed algorithm.Simulation results show that the proposed algorithm can achieve better performance than the conventional coupled model-based algorithms in the presence of target maneuvers.
基金Supported by the National Natural Science Foundation of China and the State Education Committee of China
文摘Acryloyl terminated Poly (ethyleneoxide)macromonomers (PEO-A) with different PEO chain lengths have been prepared by deactivation of PEO alkoxide with acryloyl chloride. A new kind of amphiphilic polystyrene-g-poly (ethylene oxide)graft copolymer containing both microphase separated and PEO side chain structures has been synthesized from radical copolymerization of PEO-A macromonomer with styrene. After careful purification by a newly-developed method called 'selective dissolution', the well-defined structure of the purified copolymers was confirmed by IR, ~1H-NMR and GPC. Various experimental parameters controlling the copolymerization were studied in detail. The results indicated that the feed ratio of styrene to macromonomer(S/M) was the most important determining factor for the composition of the copolymers. A detailed 'comb- model' was proposed to describe the molecular structure of the graft copolymers. Finally, this amphiphilic graft copolymers may readily form microphase separated structures as clearly indicated by transmission electron microscopy.
文摘Accurate prediction of unsteady separated turbulent flows remains one of the toughest tasks and a practi cal challenge for turbulence modeling. In this paper, a 2D flow past a circular cylinder at Reynolds number 3,900 is numerically investigated by using the technique of unsteady RANS （URANS）. Some typical linear and nonlinear eddy viscosity turbulence models （LEVM and NLEVM） and a quadratic explicit algebraic stress model （EASM） are evaluated. Numerical results have shown that a high-performance cubic NLEVM, such as CLS, are superior to the others in simulating turbulent separated flows with unsteady vortex shedding.
基金supported by grants from the National Natural Science Foundation of China(No.81273683)the Foundation of Hubei Provincial Health Department(No.2012Z-Y04)
文摘The effect of Fructus Mume formula and its separated prescription extract on insulin resis- tance in type 2 diabetic rats was investigated. The rat model of type 2 diabetes was established by feed- ing on a high-fat diet for 8 weeks and by subsequently intravenous injection of small doses of strepto- zotocin. Rats in treatment groups, including the Fructus Mume formula treatment group （FM）, the cold property herbs of Fructus Mume formula treatment group （CFM）, the warm property herbs of Fructus Mume formula treatment group （WFM）, were administrated with Fructus Mume formula and its sepa- rated prescription extract by gavage, while the rats in diabetic model group （DM） and metformin group （MET） were given by gavage with normal saline and metformin correspondingly. The body weight be- fore and after treatment was measured, and the oral glucose tolerance test （OGTT） and the insulin re- lease test （IRT） were performed. The homeostasis model assessment-insulin resistance index （HOMA-IR） was calculated. The protein and mRNA expression levels of Insr, β-arrestin-2, Its-1 and Glut-4 in the liver, skeletal muscle and fat tissues were detected by using Western blotting and RT-PCR respectively. The results demonstrated that, as compared with DM group, OGTT, IRT （0 h, 1 h） levels and HOMR-IR in treatment groups were all reduced, meanwhile their protein and mRNA expression levels of Insr, Irs-1 and Glut-4 in the liver, skeletal muscle and fat tissues were obviously increased, and their protein and mRNA expression levels of β-arrestin-2 in the liver and skeletal muscle tissues were also markedly increased. It was suggested that the Fructus Mume formula and its separated prescription extracts could effectively improve insulin resistance in type 2 diabetic rats, which might be related to the up-regulated expression of Insr, Irs-1 and Glut-4 in the liver, skeletal muscle and fat tissues, and β-arrestin-2 in the liver and skeletal muscle tissues.
