Performance-based design for a constructional steel frame in nonlinear-plastic region requires an improvement in order to achieve a reliable structural analysis.The need to explicitly consider the nonlinear behaviour ...Performance-based design for a constructional steel frame in nonlinear-plastic region requires an improvement in order to achieve a reliable structural analysis.The need to explicitly consider the nonlinear behaviour of structures makes the numerical modelling approach much more favourable than expensive and potentially dangerous experimental work.The parameters considered in the analysis are not limited to the linear change of geometry and material yielding,but also include the effect of large deformations,geometrical imperfections,load eccentricities,residual stresses,strain-unloading,and the nonlinear boundary conditions.Such analysis requires the use of accurate mathematical modelling and effective numerical procedures for solving equations of equilibrium.With that in mind,this paper presents the mathematical formulations and finite element procedures of nonlinear inelastic steel frame analysis with quasi-static semi-rigid connections.Verification and validation of the developed analytical procedures are conducted and good agreements are obtained.It is an approach that enables the structural behaviour of constructional steel frames to be traced throughout the entire range of loading until failure.It also provides information on the derivation of the structural analysis by using finite element method.展开更多
In educational settings,instructors often lead students through hands-on software projects,sometimes engaging two different schools or departments.How can such collaborations be made more efficient,and how can student...In educational settings,instructors often lead students through hands-on software projects,sometimes engaging two different schools or departments.How can such collaborations be made more efficient,and how can students truly experience the importance of teamwork and the impact of organizational structure on project complexity?To answer these questions,we introduce the requirement-driven organization structure(R-DOS)approach,which tightly couples software requirements with the actual development process.By extending problem-frames modeling and focusing on requirements,R-DOS allows educators and students to(1)diagnose structural flaws early,(2)prescribe role-level and communication fixes,and(3)observe-in real time-how poor structure can derail a project while good structure accelerates learning and delivery.展开更多
The stiffness matrix of semi-rigidly connected composite beams considering interface slip was established and the calculation method for elastic seismic response of composite frame was derived.The corresponding calcul...The stiffness matrix of semi-rigidly connected composite beams considering interface slip was established and the calculation method for elastic seismic response of composite frame was derived.The corresponding calculation programs were developed.Introducing the dimensionless quantities that were related to the connector shearing stiffness and the joint rotation stiffness,the influences of interface slip and semi-rigid joint on composite frame were transferred to quantitative parameter analysis,taking account of cross sectional properties,materials and linear stiffness of composite beam synthetically.Based on the calculation programs,free vibration frequencies and seismic responses of semi-rigid joint steel-concrete composite frame considering interface slip were calculated.The influences of interface slip and semi rigid joint on dynamic characteristics and seismic response were analyzed and the seismic design advices were presented.The results show that the interface slip decreases the free vibration frequencies and increase the seismic responses of composite frame.The semi-rigid joint reduces the free vibration frequencies and increases seismic responses of composite frame compared with rigid joint.With the increase of joint rotational stiffness,the elastic seismic responses of composite frame increase firstly and then decrease.The effects are related to the ratio of joint rotation stiffness to linear stiffness of composite beam.展开更多
Stepping out of Danyang Railway Station,the large sign reading“China Danyang Optical City”immediately comes into view across the road.Inside the bustling marketplace,a dazzling array of eyeglass frames and lenses is...Stepping out of Danyang Railway Station,the large sign reading“China Danyang Optical City”immediately comes into view across the road.Inside the bustling marketplace,a dazzling array of eyeglass frames and lenses is neatly displayed in rows of shops,attracting consumers from across the country.展开更多
A 9-story concrete-filled steel tubular frame model is used to analyze the response of joints due to sudden column loss. Three different models are developed and compared to study the efficiency and feasibility of sim...A 9-story concrete-filled steel tubular frame model is used to analyze the response of joints due to sudden column loss. Three different models are developed and compared to study the efficiency and feasibility of simulation, which include substructure model, beam element model and solid element model. The comparison results show that the substructure model has a satisfying capability, calculation efficiency and accuracy to predict the concerned joints as well as the overall framework. Based on the substructure model and a kind of semi-rigid connection for concretefilled square hollow section steel column proposed in this paper, the nonlinear dynamic analyses are conducted by the alternate path method. It is found that the removal of the ground inner column brings high-level joint moments and comparatively low-level axial tension forces. The initial stiffness and transmitted ultimate moment of the semi-rigid connection are the main factors that influence the frame behavior, and their lower limit should be guaranteed to resist collapse. Reduced ultimate moment results in drastic displacement and axial force development, which may bring progressive collapse. The higher initial stiffness ensures that the structure has a stronger capacity to resist progressive collapse.展开更多
We connect magic(non-stabilizer)states,symmetric informationally complete positive operator valued measures(SIC-POVMs),and mutually unbiased bases(MUBs)in the context of group frames,and study their interplay.Magic st...We connect magic(non-stabilizer)states,symmetric informationally complete positive operator valued measures(SIC-POVMs),and mutually unbiased bases(MUBs)in the context of group frames,and study their interplay.Magic states are quantum resources in the stabilizer formalism of quantum computation.SIC-POVMs and MUBs are fundamental structures in quantum information theory with many applications in quantum foundations,quantum state tomography,and quantum cryptography,etc.In this work,we study group frames constructed from some prominent magic states,and further investigate their applications.Our method exploits the orbit of discrete Heisenberg-Weyl group acting on an initial fiducial state.We quantify the distance of the group frames from SIC-POVMs and MUBs,respectively.As a simple corollary,we reproduce a complete family of MUBs of any prime dimensional system by introducing the concept of MUB fiducial states,analogous to the well-known SIC-POVM fiducial states.We present an intuitive and direct construction of MUB fiducial states via quantum T-gates,and demonstrate that for the qubit system,there are twelve MUB fiducial states,which coincide with the H-type magic states.We compare MUB fiducial states and SIC-POVM fiducial states from the perspective of magic resource for stabilizer quantum computation.We further pose the challenging issue of identifying all MUB fiducial states in general dimensions.展开更多
Ensuring the secure transmission of secret messages,particularly through video—one of the most widely used media formats—is a critical challenge in the field of information security.Relying on a single-layered secur...Ensuring the secure transmission of secret messages,particularly through video—one of the most widely used media formats—is a critical challenge in the field of information security.Relying on a single-layered security approach is often insufficient for safeguarding sensitive data.This study proposes a triple-lightweight cryptographic and steganographic model that integrates the Hill Cipher Technique(HCT),Rotation Left Digits(RLD),and Discrete Wavelet Transform(DWT)to embed secret messages within video frames securely.The approach begins with encrypting the secret text using a private key matrix(PK^(1))of size 2×2 up to 6×6 via HCT.A second encryption layer is applied using a dynamic private key(PK2)derived from the RGB pixel values of the video frame,resulting in a rotated cipher.The doubly encrypted message is then embedded into the video frames using the DWT method.Upon transmission,the concealed message is extracted using inverse DWT and decrypted in two steps—first with PK2 and then with the inverse of PK^(1).Experiments conducted using MPEG video sequences and message lengths ranging from 10 to 300 bytes demonstrate strong performance in terms of Mean Square Error(MSE),Peak Signal-to-Noise Ratio(PSNR),and Correlation Coefficient(CC)between original and encrypted messages.The similarity between original and stego frames is further validated using Structural Similarity Index(SSIM),Mean Absolute Error(MAE),Number of Pixel Change Rate(NPCR),and Unified Average Changing Intensity(UACI).Results confirm that utilizing video frames to generate PK2 offers superior security compared to static key images.Moreover,the indistinguishability between original and stego frames highlights the method’s robustness against visual and statistical attacks.展开更多
Improvement of the detection ability of quantum entanglement is one of the essential tasks in quantum computing and quantum information.Finite tight frames play a fundamental role in a wide variety of areas and,genera...Improvement of the detection ability of quantum entanglement is one of the essential tasks in quantum computing and quantum information.Finite tight frames play a fundamental role in a wide variety of areas and,generally,each application requires a specific class of frames and is closely related to quantum measurement.It is worth noting that a maximal set of complex equiangular vectors is closely related to a symmetric informationally complete measurement.Hence,our goal in this work is to propose a series of separability criteria assigned to a finite tight frame and some well-known inequalities in different quantum systems,respectively.In addition,some tighter criteria to detect entanglement for many-body quantum states are presented in arbitrary dimensions.Finally,the effectiveness of the proposed entanglement detection criteria is illustrated through some detailed examples.展开更多
A relationship was discovered between the amplification factor and the number of load increments that are needed to limit the relative error to one percent in second-order elastic analyses with a predictor-corrector s...A relationship was discovered between the amplification factor and the number of load increments that are needed to limit the relative error to one percent in second-order elastic analyses with a predictor-corrector solution scheme.Previous research by the authors proposed a design equation to determine the required minimum number of load increments based on an evaluation of the elastic critical buckling load ratio.Further research has shown that an approximate amplification factor equation that is based on the B2 multiplier equation produces similar results when the amplification factor is less than approximately four.Eleven moment frames are used to verify the use of the new approximate amplification factor in the proposed design equation.展开更多
Under hydrothermal and solvothermal conditions,two novel cobalt-based complexes,{[Co_(2)(CIA)(OH)(1,4-dtb)]·3.2H_(2)O}n(HU23)and{[Co_(2)(CIA)(OH)(1,4-dib)]·3.5H2O·DMF}n(HU24),were successfully construct...Under hydrothermal and solvothermal conditions,two novel cobalt-based complexes,{[Co_(2)(CIA)(OH)(1,4-dtb)]·3.2H_(2)O}n(HU23)and{[Co_(2)(CIA)(OH)(1,4-dib)]·3.5H2O·DMF}n(HU24),were successfully constructed by coordinatively assembling the semi-rigid multidentate ligand 5-(1-carboxyethoxy)isophthalic acid(H₃CIA)with the Nheterocyclic ligands 1,4-di(4H-1,2,4-triazol-4-yl)benzene(1,4-dtb)and 1,4-di(1H-imidazol-1-yl)benzene(1,4-dib),respectively,around Co^(2+)ions.Single-crystal X-ray diffraction analysis revealed that in both complexes HU23 and HU24,the CIA^(3-)anions adopt aκ^(7)-coordination mode,bridging six Co^(2+)ions via their five carboxylate oxygen atoms and one ether oxygen atom.This linkage forms tetranuclear[Co4(μ3-OH)2]^(6+)units.These Co-oxo cluster units were interconnected by CIA^(3-)anions to assemble into 2D kgd-type structures featuring a 3,6-connected topology.The 2D layers were further connected by 1,4-dtb and 1,4-dib,resulting in 3D pillar-layered frameworks for HU23 and HU24.Notably,despite the similar configurations of 1,4-dtb and 1,4-dib,differences in their coordination spatial orientations lead to topological divergence in the 3D frameworks of HU23 and HU24.Topological analysis indicates that the frameworks of HU23 and HU24 can be simplified into a 3,10-connected net(point symbol:(4^(10).6^(3).8^(2))(4^(3))_(2))and a 3,8-connected tfz-d net(point symbol:(4^(3))_(2)((4^(6).6^(18).8^(4)))),respectively.This structural differentiation confirms the precise regulatory role of ligands on the topology of metal-organic frameworks.Moreover,the ultraviolet-visible absorption spectra confirmed that HU23 and HU24 have strong absorption capabilities for ultraviolet and visible light.According to the Kubelka-Munk method,their bandwidths were 2.15 and 2.08 eV,respectively,which are consistent with those of typical semiconductor materials.Variable-temperature magnetic susceptibility measurements(2-300 K)revealed significant antiferromagnetic coupling in both complexes,with their effective magnetic moments decreasing markedly as the temperature lowered.CCDC:2457554,HU23;2457553,HU24.展开更多
A three-dimensional beam element is derived based on the principle of stationary total potential energy for geometrically nonlinear analysis of space frames. A new tangent stiffness matrix, which allows for high order...A three-dimensional beam element is derived based on the principle of stationary total potential energy for geometrically nonlinear analysis of space frames. A new tangent stiffness matrix, which allows for high order effects of element deformations, replaces the conventional incremental secant stiffness matrix. Two deformation stiffness matrices due to the variation of axial force and bending moments are included in the tangent stiffness. They are functions of element deformations and incorporate the coupling among axial, lateral and torsional deformations. A correction matrix is added to the tangent stiffness matrix to make displacement derivatives equivalent to the commutative rotational degrees of freedom. Numerical examples show that the proposed dement is accurate and efficient in predicting the nonlinear behavior, such as axial-torsional and flexural-torsional buckling, of space frames even when fewer elements are used to model a member.展开更多
Suppose that Φ(x)∈L 2(R) with compact support and V= span{Φ(x-k)|k∈Z}. In this note, we prove that if {Φ(x-k)k|k∈Z} is tight frame with bound 1 in V, then {Φ(x-k)|k∈Z} must be an orthonormal basis of V.
In the paper, we study the stability of Hilbert space generalized frames under perturbations. We get some results that are in spirit close to classical results for discrete frames, due to OLE Christensen.
In this paper we shall offer a separation axiom for frames inspired by the Hausdorff separation axiom for topological spaces. We call it separated condition. This is a condition on topology OX equivalent to the ...In this paper we shall offer a separation axiom for frames inspired by the Hausdorff separation axiom for topological spaces. We call it separated condition. This is a condition on topology OX equivalent to the T O space X being Hausdorff. The class of separated frames includes that of strong Hausdorff frames and that of S frames. We shall show that the class of separated frames is a class closed under the formation of coproducts and subspaces, and the space Fil( L ) is Hausdorff for any separated frame L . Therefore there is a contravariant adjunction between the category TOP 2 of Hausdorff topological spaces and the category FRAM 2 of separated frames.展开更多
In this article, we introduce and characterize approximate duality for g-frames. We get some important properties and applications of approximate duals. We also obtain some new results in approximate duality of frames...In this article, we introduce and characterize approximate duality for g-frames. We get some important properties and applications of approximate duals. We also obtain some new results in approximate duality of frames, and generalize some of the known results in approximate duality of frames to g-frames. We also get some results for fusion frames, and perturbation of approximately dual g-frames. We show that approximate duals are stable under small perturbations and they are useful for erasures and reconstruction.展开更多
We use two appropriate bounded invertible operators to define a controlled frame with optimal frame bounds. We characterize those operators that produces Parseval controlled frames also we state a way to construct nea...We use two appropriate bounded invertible operators to define a controlled frame with optimal frame bounds. We characterize those operators that produces Parseval controlled frames also we state a way to construct nearly Parseval controlled frames. We intro- duce a new perturbation of controlled frames to obtain new frames from a given one. Also we reduce the distance of frames by appropriate operators and produce nearly dual frames from two given frames which are not dual frames for each other.展开更多
The workpiece frames relative to each robot base frame should be known in advance for the proper operation of twin-robot nondestructive testing system. However, when two robots are separated from the workpieces, the t...The workpiece frames relative to each robot base frame should be known in advance for the proper operation of twin-robot nondestructive testing system. However, when two robots are separated from the workpieces, the twin robots cannot reach the same point to complete the process of workpiece frame positioning. Thus, a new method is proposed to solve the problem of coincidence between workpiece frames. Transformation between two robot base frames is initiated by measuring the coordinate values of three non-collinear calibration points. The relationship between the workpiece frame and that of the slave robot base frame is then determined according to the known transformation of two robot base frames, as well as the relationship between the workpiece frame and that of the master robot base frame. Only one robot is required to actually measure the coordinate values of the calibration points on the workpiece. This requirement is beneficial when one of the robots cannot reach and measure the calibration points. The coordinate values of the calibration points are derived by driving the robot hand to the points and recording the values of top center point（TCP） coordinates. The translation and rotation matrices relate either the two robot base frames or the workpiece and master robot. The coordinated are solved using the measured values of the calibration points according to the Cartesian transformation principle. An optimal method is developed based on exponential mapping of Lie algebra to ensure that the rotation matrix is orthogonal. Experimental results show that this method involves fewer steps, offers significant advantages in terms of operation and time-saving. A method used to synchronize workpiece frames in twin-robot system automatically is presented.展开更多
In this paper,a Littlewood-Paley function characterization of the spaces L p（R）,1〈p〈∞,is first established by means of the equivalent conditions of tight wavelet frames,wherein the Littlewood-Paley function is as...In this paper,a Littlewood-Paley function characterization of the spaces L p（R）,1〈p〈∞,is first established by means of the equivalent conditions of tight wavelet frames,wherein the Littlewood-Paley function is associated with a tight wavelet frame generated by the so-called extension principles.With the above characterization,another characterization of L p（R）,1〈p〈∞,is also established in terms of the weighted l 2-norm of the wavelet frame coefficients,which can be a useful tool in harmonic analysis,approximation theory,and image processing.展开更多
Accurate estimates of ductility demands on buckling-restrained braced frames(BRBFs)are crucial to performance-based design of BRBFs.An analytical study on the seismic behavior of BRBFs has been conducted at the ATLSS ...Accurate estimates of ductility demands on buckling-restrained braced frames(BRBFs)are crucial to performance-based design of BRBFs.An analytical study on the seismic behavior of BRBFs has been conducted at the ATLSS Center,Lehigh University to prepare for an upcoming experimental program.The analysis program DRAIN-2DX was used to model a one-bay,four-story prototype BRBF including material and geometric nonlinearities.The buckling- restrained brace(BRB)model incorporates both isotropic and kinematic hardening.Nonlinear static pushover and time- history analyses were performed on the prototype BRBF.Performance objectives for the BRBs were defined and used to evaluate the time-history analysis results.Particular emphasis was placed on global ductility demands and ductility demands on the BRBs.These demands were compared with anticipated ductility capacities.The analysis results,along with results from similar previous studies,are used to evaluate the BRBF design provisions that have been recommended for codification in the United States.The results show that BRB maximum ductility demands can be as high as 20 to 25.These demands significantly exceed those anticipated by the BRBF recommended provisions.Results from the static pushover and time- history analyses are used to demonstrate why the ductility demands exceed those anticipated by the recommended provisions. The BRB qualification testing protocol contained in the BRBF recommended provisions is shown to be inadequate because it requires only a maximum ductility demand of at most 7.5.Modifications to the testing protocol are recommended.展开更多
The brake unit bracket of a bogie frame is an important load-carrying component, particularly under emergency start/stop conditions. Conventional infinite/safe life approaches provide an over-conservative recommendati...The brake unit bracket of a bogie frame is an important load-carrying component, particularly under emergency start/stop conditions. Conventional infinite/safe life approaches provide an over-conservative recommendation for the allowable strength and lifetime, which hinders the lightweight design of modern railway vehicles. In this study, to ensure the reliability and durability of a brake unit bracket, an attempt was made to integrate the nominal stress method and an advanced damage tolerance method. First, a complex bogie frame was modelled using solid elements instead of plate and beam elements. A hot spot stress region on the bracket was found under an eight-stage load spectrum obtained from the Wuhan–Guangzhou high-speed railway line. Based on the probability of foreign damage, a semi-elliptical surface crack was then assumed for residual life assessment. The results obtained by the cumulative damage and damage tolerance methods show that the brake unit bracket can operate for over 30 years. Moreover, even if a 2-mm depth crack exists, the brake unit bracket can be safely operated for more than 2.27 years, with the hope that the crack can be detected in subsequent maintenance procedures. Finally, an appropriate safety margin was suggested which provides a basis for the life prediction and durability assessment of brake unit brackets of high-speed railways.展开更多
基金The authors would like to acknowledge the supports from Universiti Teknologi Malaysia(UTM)and Ministry of Higher Education(MOHE).
文摘Performance-based design for a constructional steel frame in nonlinear-plastic region requires an improvement in order to achieve a reliable structural analysis.The need to explicitly consider the nonlinear behaviour of structures makes the numerical modelling approach much more favourable than expensive and potentially dangerous experimental work.The parameters considered in the analysis are not limited to the linear change of geometry and material yielding,but also include the effect of large deformations,geometrical imperfections,load eccentricities,residual stresses,strain-unloading,and the nonlinear boundary conditions.Such analysis requires the use of accurate mathematical modelling and effective numerical procedures for solving equations of equilibrium.With that in mind,this paper presents the mathematical formulations and finite element procedures of nonlinear inelastic steel frame analysis with quasi-static semi-rigid connections.Verification and validation of the developed analytical procedures are conducted and good agreements are obtained.It is an approach that enables the structural behaviour of constructional steel frames to be traced throughout the entire range of loading until failure.It also provides information on the derivation of the structural analysis by using finite element method.
基金supported by the National Natural Science Foundation of China(No.62362006)Guangxi Science and Technology Project(Key Research&Development)(No.GuiKeAB24010343)+1 种基金Guangxi“Bagui Scholar”Teams for Innovation and Research,Innovation Project of Guangxi Graduate Education(No.YCSW2025193)Guangxi Collaborative Innovation Center of Multi-source Information Integration and Intelligent Processing.
文摘In educational settings,instructors often lead students through hands-on software projects,sometimes engaging two different schools or departments.How can such collaborations be made more efficient,and how can students truly experience the importance of teamwork and the impact of organizational structure on project complexity?To answer these questions,we introduce the requirement-driven organization structure(R-DOS)approach,which tightly couples software requirements with the actual development process.By extending problem-frames modeling and focusing on requirements,R-DOS allows educators and students to(1)diagnose structural flaws early,(2)prescribe role-level and communication fixes,and(3)observe-in real time-how poor structure can derail a project while good structure accelerates learning and delivery.
基金Project(50778177) supported by the National Natural Science Foundation of ChinaProject(07JJ1009) supported by the Outstanding Younger Fund of Hunan Province,China
文摘The stiffness matrix of semi-rigidly connected composite beams considering interface slip was established and the calculation method for elastic seismic response of composite frame was derived.The corresponding calculation programs were developed.Introducing the dimensionless quantities that were related to the connector shearing stiffness and the joint rotation stiffness,the influences of interface slip and semi-rigid joint on composite frame were transferred to quantitative parameter analysis,taking account of cross sectional properties,materials and linear stiffness of composite beam synthetically.Based on the calculation programs,free vibration frequencies and seismic responses of semi-rigid joint steel-concrete composite frame considering interface slip were calculated.The influences of interface slip and semi rigid joint on dynamic characteristics and seismic response were analyzed and the seismic design advices were presented.The results show that the interface slip decreases the free vibration frequencies and increase the seismic responses of composite frame.The semi-rigid joint reduces the free vibration frequencies and increases seismic responses of composite frame compared with rigid joint.With the increase of joint rotational stiffness,the elastic seismic responses of composite frame increase firstly and then decrease.The effects are related to the ratio of joint rotation stiffness to linear stiffness of composite beam.
文摘Stepping out of Danyang Railway Station,the large sign reading“China Danyang Optical City”immediately comes into view across the road.Inside the bustling marketplace,a dazzling array of eyeglass frames and lenses is neatly displayed in rows of shops,attracting consumers from across the country.
基金Supported by National Natural Science Foundation of China (No.50878066)Natural Science Foundation of Heilongjiang Province (No.ZJG0701)Heilongjiang Postdoctoral Science Foundation
文摘A 9-story concrete-filled steel tubular frame model is used to analyze the response of joints due to sudden column loss. Three different models are developed and compared to study the efficiency and feasibility of simulation, which include substructure model, beam element model and solid element model. The comparison results show that the substructure model has a satisfying capability, calculation efficiency and accuracy to predict the concerned joints as well as the overall framework. Based on the substructure model and a kind of semi-rigid connection for concretefilled square hollow section steel column proposed in this paper, the nonlinear dynamic analyses are conducted by the alternate path method. It is found that the removal of the ground inner column brings high-level joint moments and comparatively low-level axial tension forces. The initial stiffness and transmitted ultimate moment of the semi-rigid connection are the main factors that influence the frame behavior, and their lower limit should be guaranteed to resist collapse. Reduced ultimate moment results in drastic displacement and axial force development, which may bring progressive collapse. The higher initial stiffness ensures that the structure has a stronger capacity to resist progressive collapse.
基金supported by the National Key R&D Program of China,Grant No.2020YFA0712700the National Natural Science Foundation of China‘Mathematical Basic Theory of Quantum Computing’special project,Grant No.12341103。
文摘We connect magic(non-stabilizer)states,symmetric informationally complete positive operator valued measures(SIC-POVMs),and mutually unbiased bases(MUBs)in the context of group frames,and study their interplay.Magic states are quantum resources in the stabilizer formalism of quantum computation.SIC-POVMs and MUBs are fundamental structures in quantum information theory with many applications in quantum foundations,quantum state tomography,and quantum cryptography,etc.In this work,we study group frames constructed from some prominent magic states,and further investigate their applications.Our method exploits the orbit of discrete Heisenberg-Weyl group acting on an initial fiducial state.We quantify the distance of the group frames from SIC-POVMs and MUBs,respectively.As a simple corollary,we reproduce a complete family of MUBs of any prime dimensional system by introducing the concept of MUB fiducial states,analogous to the well-known SIC-POVM fiducial states.We present an intuitive and direct construction of MUB fiducial states via quantum T-gates,and demonstrate that for the qubit system,there are twelve MUB fiducial states,which coincide with the H-type magic states.We compare MUB fiducial states and SIC-POVM fiducial states from the perspective of magic resource for stabilizer quantum computation.We further pose the challenging issue of identifying all MUB fiducial states in general dimensions.
文摘Ensuring the secure transmission of secret messages,particularly through video—one of the most widely used media formats—is a critical challenge in the field of information security.Relying on a single-layered security approach is often insufficient for safeguarding sensitive data.This study proposes a triple-lightweight cryptographic and steganographic model that integrates the Hill Cipher Technique(HCT),Rotation Left Digits(RLD),and Discrete Wavelet Transform(DWT)to embed secret messages within video frames securely.The approach begins with encrypting the secret text using a private key matrix(PK^(1))of size 2×2 up to 6×6 via HCT.A second encryption layer is applied using a dynamic private key(PK2)derived from the RGB pixel values of the video frame,resulting in a rotated cipher.The doubly encrypted message is then embedded into the video frames using the DWT method.Upon transmission,the concealed message is extracted using inverse DWT and decrypted in two steps—first with PK2 and then with the inverse of PK^(1).Experiments conducted using MPEG video sequences and message lengths ranging from 10 to 300 bytes demonstrate strong performance in terms of Mean Square Error(MSE),Peak Signal-to-Noise Ratio(PSNR),and Correlation Coefficient(CC)between original and encrypted messages.The similarity between original and stego frames is further validated using Structural Similarity Index(SSIM),Mean Absolute Error(MAE),Number of Pixel Change Rate(NPCR),and Unified Average Changing Intensity(UACI).Results confirm that utilizing video frames to generate PK2 offers superior security compared to static key images.Moreover,the indistinguishability between original and stego frames highlights the method’s robustness against visual and statistical attacks.
基金supported by the Natural Science Foundation of Sichuan Province(Grant No.25QNJJ4066)。
文摘Improvement of the detection ability of quantum entanglement is one of the essential tasks in quantum computing and quantum information.Finite tight frames play a fundamental role in a wide variety of areas and,generally,each application requires a specific class of frames and is closely related to quantum measurement.It is worth noting that a maximal set of complex equiangular vectors is closely related to a symmetric informationally complete measurement.Hence,our goal in this work is to propose a series of separability criteria assigned to a finite tight frame and some well-known inequalities in different quantum systems,respectively.In addition,some tighter criteria to detect entanglement for many-body quantum states are presented in arbitrary dimensions.Finally,the effectiveness of the proposed entanglement detection criteria is illustrated through some detailed examples.
文摘A relationship was discovered between the amplification factor and the number of load increments that are needed to limit the relative error to one percent in second-order elastic analyses with a predictor-corrector solution scheme.Previous research by the authors proposed a design equation to determine the required minimum number of load increments based on an evaluation of the elastic critical buckling load ratio.Further research has shown that an approximate amplification factor equation that is based on the B2 multiplier equation produces similar results when the amplification factor is less than approximately four.Eleven moment frames are used to verify the use of the new approximate amplification factor in the proposed design equation.
文摘Under hydrothermal and solvothermal conditions,two novel cobalt-based complexes,{[Co_(2)(CIA)(OH)(1,4-dtb)]·3.2H_(2)O}n(HU23)and{[Co_(2)(CIA)(OH)(1,4-dib)]·3.5H2O·DMF}n(HU24),were successfully constructed by coordinatively assembling the semi-rigid multidentate ligand 5-(1-carboxyethoxy)isophthalic acid(H₃CIA)with the Nheterocyclic ligands 1,4-di(4H-1,2,4-triazol-4-yl)benzene(1,4-dtb)and 1,4-di(1H-imidazol-1-yl)benzene(1,4-dib),respectively,around Co^(2+)ions.Single-crystal X-ray diffraction analysis revealed that in both complexes HU23 and HU24,the CIA^(3-)anions adopt aκ^(7)-coordination mode,bridging six Co^(2+)ions via their five carboxylate oxygen atoms and one ether oxygen atom.This linkage forms tetranuclear[Co4(μ3-OH)2]^(6+)units.These Co-oxo cluster units were interconnected by CIA^(3-)anions to assemble into 2D kgd-type structures featuring a 3,6-connected topology.The 2D layers were further connected by 1,4-dtb and 1,4-dib,resulting in 3D pillar-layered frameworks for HU23 and HU24.Notably,despite the similar configurations of 1,4-dtb and 1,4-dib,differences in their coordination spatial orientations lead to topological divergence in the 3D frameworks of HU23 and HU24.Topological analysis indicates that the frameworks of HU23 and HU24 can be simplified into a 3,10-connected net(point symbol:(4^(10).6^(3).8^(2))(4^(3))_(2))and a 3,8-connected tfz-d net(point symbol:(4^(3))_(2)((4^(6).6^(18).8^(4)))),respectively.This structural differentiation confirms the precise regulatory role of ligands on the topology of metal-organic frameworks.Moreover,the ultraviolet-visible absorption spectra confirmed that HU23 and HU24 have strong absorption capabilities for ultraviolet and visible light.According to the Kubelka-Munk method,their bandwidths were 2.15 and 2.08 eV,respectively,which are consistent with those of typical semiconductor materials.Variable-temperature magnetic susceptibility measurements(2-300 K)revealed significant antiferromagnetic coupling in both complexes,with their effective magnetic moments decreasing markedly as the temperature lowered.CCDC:2457554,HU23;2457553,HU24.
文摘A three-dimensional beam element is derived based on the principle of stationary total potential energy for geometrically nonlinear analysis of space frames. A new tangent stiffness matrix, which allows for high order effects of element deformations, replaces the conventional incremental secant stiffness matrix. Two deformation stiffness matrices due to the variation of axial force and bending moments are included in the tangent stiffness. They are functions of element deformations and incorporate the coupling among axial, lateral and torsional deformations. A correction matrix is added to the tangent stiffness matrix to make displacement derivatives equivalent to the commutative rotational degrees of freedom. Numerical examples show that the proposed dement is accurate and efficient in predicting the nonlinear behavior, such as axial-torsional and flexural-torsional buckling, of space frames even when fewer elements are used to model a member.
文摘Suppose that Φ(x)∈L 2(R) with compact support and V= span{Φ(x-k)|k∈Z}. In this note, we prove that if {Φ(x-k)k|k∈Z} is tight frame with bound 1 in V, then {Φ(x-k)|k∈Z} must be an orthonormal basis of V.
文摘In the paper, we study the stability of Hilbert space generalized frames under perturbations. We get some results that are in spirit close to classical results for discrete frames, due to OLE Christensen.
文摘In this paper we shall offer a separation axiom for frames inspired by the Hausdorff separation axiom for topological spaces. We call it separated condition. This is a condition on topology OX equivalent to the T O space X being Hausdorff. The class of separated frames includes that of strong Hausdorff frames and that of S frames. We shall show that the class of separated frames is a class closed under the formation of coproducts and subspaces, and the space Fil( L ) is Hausdorff for any separated frame L . Therefore there is a contravariant adjunction between the category TOP 2 of Hausdorff topological spaces and the category FRAM 2 of separated frames.
文摘In this article, we introduce and characterize approximate duality for g-frames. We get some important properties and applications of approximate duals. We also obtain some new results in approximate duality of frames, and generalize some of the known results in approximate duality of frames to g-frames. We also get some results for fusion frames, and perturbation of approximately dual g-frames. We show that approximate duals are stable under small perturbations and they are useful for erasures and reconstruction.
文摘We use two appropriate bounded invertible operators to define a controlled frame with optimal frame bounds. We characterize those operators that produces Parseval controlled frames also we state a way to construct nearly Parseval controlled frames. We intro- duce a new perturbation of controlled frames to obtain new frames from a given one. Also we reduce the distance of frames by appropriate operators and produce nearly dual frames from two given frames which are not dual frames for each other.
基金Supported by International S&T Cooperation Program of China(Grant No.2012DFA70260)High-end CNC Machine and Basic Manufacturing Equipment of Chinese Key National Science and Technology(Grant No.2011ZX04014-081)
文摘The workpiece frames relative to each robot base frame should be known in advance for the proper operation of twin-robot nondestructive testing system. However, when two robots are separated from the workpieces, the twin robots cannot reach the same point to complete the process of workpiece frame positioning. Thus, a new method is proposed to solve the problem of coincidence between workpiece frames. Transformation between two robot base frames is initiated by measuring the coordinate values of three non-collinear calibration points. The relationship between the workpiece frame and that of the slave robot base frame is then determined according to the known transformation of two robot base frames, as well as the relationship between the workpiece frame and that of the master robot base frame. Only one robot is required to actually measure the coordinate values of the calibration points on the workpiece. This requirement is beneficial when one of the robots cannot reach and measure the calibration points. The coordinate values of the calibration points are derived by driving the robot hand to the points and recording the values of top center point（TCP） coordinates. The translation and rotation matrices relate either the two robot base frames or the workpiece and master robot. The coordinated are solved using the measured values of the calibration points according to the Cartesian transformation principle. An optimal method is developed based on exponential mapping of Lie algebra to ensure that the rotation matrix is orthogonal. Experimental results show that this method involves fewer steps, offers significant advantages in terms of operation and time-saving. A method used to synchronize workpiece frames in twin-robot system automatically is presented.
基金Supported by the National High Technology Research and Development Program of China (863 Program) (2009AA12Z203,2008AA 12Z201)
文摘In this paper,a Littlewood-Paley function characterization of the spaces L p（R）,1〈p〈∞,is first established by means of the equivalent conditions of tight wavelet frames,wherein the Littlewood-Paley function is associated with a tight wavelet frame generated by the so-called extension principles.With the above characterization,another characterization of L p（R）,1〈p〈∞,is also established in terms of the weighted l 2-norm of the wavelet frame coefficients,which can be a useful tool in harmonic analysis,approximation theory,and image processing.
文摘Accurate estimates of ductility demands on buckling-restrained braced frames(BRBFs)are crucial to performance-based design of BRBFs.An analytical study on the seismic behavior of BRBFs has been conducted at the ATLSS Center,Lehigh University to prepare for an upcoming experimental program.The analysis program DRAIN-2DX was used to model a one-bay,four-story prototype BRBF including material and geometric nonlinearities.The buckling- restrained brace(BRB)model incorporates both isotropic and kinematic hardening.Nonlinear static pushover and time- history analyses were performed on the prototype BRBF.Performance objectives for the BRBs were defined and used to evaluate the time-history analysis results.Particular emphasis was placed on global ductility demands and ductility demands on the BRBs.These demands were compared with anticipated ductility capacities.The analysis results,along with results from similar previous studies,are used to evaluate the BRBF design provisions that have been recommended for codification in the United States.The results show that BRB maximum ductility demands can be as high as 20 to 25.These demands significantly exceed those anticipated by the BRBF recommended provisions.Results from the static pushover and time- history analyses are used to demonstrate why the ductility demands exceed those anticipated by the recommended provisions. The BRB qualification testing protocol contained in the BRBF recommended provisions is shown to be inadequate because it requires only a maximum ductility demand of at most 7.5.Modifications to the testing protocol are recommended.
基金Supported by National Natural Science Foundation of China(Grant No.11572267)Sichuan Science and Technology Program(Grant No.2017JY0216)+1 种基金Open Research Project of State Key Laboratory for Strength and Vibration of Mechanical Structures of China(Grant No.SV2016-KF-21)Open Research Project of State Key Laboratory of Traction Power of China(Grant No.2018TPL_T03)
文摘The brake unit bracket of a bogie frame is an important load-carrying component, particularly under emergency start/stop conditions. Conventional infinite/safe life approaches provide an over-conservative recommendation for the allowable strength and lifetime, which hinders the lightweight design of modern railway vehicles. In this study, to ensure the reliability and durability of a brake unit bracket, an attempt was made to integrate the nominal stress method and an advanced damage tolerance method. First, a complex bogie frame was modelled using solid elements instead of plate and beam elements. A hot spot stress region on the bracket was found under an eight-stage load spectrum obtained from the Wuhan–Guangzhou high-speed railway line. Based on the probability of foreign damage, a semi-elliptical surface crack was then assumed for residual life assessment. The results obtained by the cumulative damage and damage tolerance methods show that the brake unit bracket can operate for over 30 years. Moreover, even if a 2-mm depth crack exists, the brake unit bracket can be safely operated for more than 2.27 years, with the hope that the crack can be detected in subsequent maintenance procedures. Finally, an appropriate safety margin was suggested which provides a basis for the life prediction and durability assessment of brake unit brackets of high-speed railways.
